-
Near-Field EM-Based Multistatic Radar Range Estimation
Authors:
François De Saint Moulin,
Guillaume Thiran,
Christophe Craeye,
Luc Vandendorpe,
Claude Oestges
Abstract:
Radar targets are traditionally modelled as point target reflectors, even in the near-field region. Yet, for radar systems operating at high carrier frequencies and small distances, traditional radar propagation models do not accurately model the scatterer responses. In this paper, a novel electromagnetic-based model is thus developed for the multistatic radar detection of a rectangular plate refl…
▽ More
Radar targets are traditionally modelled as point target reflectors, even in the near-field region. Yet, for radar systems operating at high carrier frequencies and small distances, traditional radar propagation models do not accurately model the scatterer responses. In this paper, a novel electromagnetic-based model is thus developed for the multistatic radar detection of a rectangular plate reflector in the near-field region. This model is applied to an automotive scenario, in which a linear antenna array is spread out at the front of a vehicle, and performs a radar measurement of the distance to the back of the vehicle ahead. Based on the developed received signal model, the maximum likelihood estimator of the range is designed. By exploiting the near-field target model, this estimator is shown to provide a significant gain with respect to traditional range estimators. The impact of the system and scenario parameters, i.e. the carrier frequency, bandwidth and distance to the target, is furthermore evaluated. This analysis shows that the radar resolution in the near-field regime is improved at high carrier frequencies, while saturating to the traditional bandwidth-dependent resolution in the far-field region.
△ Less
Submitted 27 March, 2024; v1 submitted 14 March, 2024;
originally announced March 2024.
-
Efficient Tracking of Dispersion Surfaces for Printed Structures using the Method of Moments
Authors:
Denis Tihon,
Shambhu Nath Jha,
Modeste Bodehou,
Christophe Craeye
Abstract:
The dispersion surfaces of printed periodic structures in layered media are efficiently computed using a full-wave method based on the periodic Method of Moments (MoM). The geometry of the dispersion surface is estimated after map** the determinant of the periodic MoM impedance matrix over a range of frequencies and impressed phase shifts. For lossless periodic structures in the long-wavelength…
▽ More
The dispersion surfaces of printed periodic structures in layered media are efficiently computed using a full-wave method based on the periodic Method of Moments (MoM). The geometry of the dispersion surface is estimated after map** the determinant of the periodic MoM impedance matrix over a range of frequencies and impressed phase shifts. For lossless periodic structures in the long-wavelength regime, such as lossless metasurfaces, a tracking algorithm is proposed to represent the dispersion surface as a superposition of parameterized iso-frequency curves. The map** process of the determinant is accelerated using a specialized interpolation technique with respect to the frequency and impressed phase shifts. The algorithm combines a fast evaluation of the rapidly varying part of the periodic impedance matrix and the interpolation of the computationally intensive but slowly varying remainder. The map** is further accelerated through the use of Macro basis functions (MBFs). The method has been first tested on lossless metasurface-type structures and validated using the commercial software CST. The specialized technique enables a drastic reduction of the number of periodic impedance matrices that needs to be explicitly computed. In the two examples considered, only 12 matrices are required to cover any phase shift and a frequency band larger than one octave. An important advantage of the proposed method is that it does not entail any approximation, so that it can be used for lossy structure and leaky waves, as demonstrated through two additional examples.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Novel Electromagnetism-Based Radar Propagation Model for 5G and Beyond
Authors:
François De Saint Moulin,
Christophe Craeye,
Luc Vandendorpe,
Claude Oestges
Abstract:
In order to evaluate the performance of radar and communication systems in future wireless networks, accurate propagation models are needed to predict efficiently the received powers at each node, and draw correct conclusions. In this paper, we present new radar propagation models based on the electromagnetism theory. The target is modelled as a flat or curved square plate to compute the scattered…
▽ More
In order to evaluate the performance of radar and communication systems in future wireless networks, accurate propagation models are needed to predict efficiently the received powers at each node, and draw correct conclusions. In this paper, we present new radar propagation models based on the electromagnetism theory. The target is modelled as a flat or curved square plate to compute the scattered field and derive accurate radar cross section modellings. With a flat square plate, the model makes the link between the radar equation and the geometrical optics propagation model used in ray-tracing applications. It is then applied to popular automotive scenarios within the stochastic geometry framework to observe the impact of such modelling.
△ Less
Submitted 4 June, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Interpolation of impedance matrices for varying quasi-periodic boundary conditions in 2D periodic Method of Moments
Authors:
Denis Tihon,
Christophe Craeye,
Nilufer Ozdemir,
Stafford Withington
Abstract:
Periodic structures can be simulated using the periodic Method of Moments. The quasi-periodicity, i.e. periodicity within a linear phase-shift, is implemented through the use of the periodic Green's function. In this paper, we propose a technique to interpolate the impedance matrix for varying phase-shifts. To improve the accuracy, the contribution of the dominant Floquet modes and a term correspo…
▽ More
Periodic structures can be simulated using the periodic Method of Moments. The quasi-periodicity, i.e. periodicity within a linear phase-shift, is implemented through the use of the periodic Green's function. In this paper, we propose a technique to interpolate the impedance matrix for varying phase-shifts. To improve the accuracy, the contribution of the dominant Floquet modes and a term corresponding to a linear phase-shift are first extracted. The technique is applied to planar geometries, but can be extended to non-planar configurations.
△ Less
Submitted 8 October, 2021;
originally announced October 2021.
-
Radio antenna design for sky-averaged 21 cm cosmology experiments: the REACH case
Authors:
J. Cumner,
E. De Lera Acedo,
D. I. L. de Villiers,
D. Anstey,
C. I. Kolitsidas,
B. Gurdon,
N. Fagnoni,
P. Alexander,
G. Bernardi,
H. T. J. Bevins,
S. Carey,
J. Cavillot,
R. Chiello,
C. Craeye,
W. Croukamp,
J. A. Ely,
A. Fialkov,
T. Gessey-Jones,
Q. Gueuning,
W. Handley,
R. Hills,
A. T. Josaitis,
G. Kulkarni,
A. Magro,
R. Maiolino
, et al. (13 additional authors not shown)
Abstract:
Following the reported detection of an absorption profile associated with the 21~cm sky-averaged signal from the Cosmic Dawn by the EDGES experiment in 2018, a number of experiments have been set up to verify this result. This paper discusses the design process used for global 21~cm experiments, focusing specifically on the Radio Experiment for the Analysis of Cosmic Hydrogen (REACH). This experim…
▽ More
Following the reported detection of an absorption profile associated with the 21~cm sky-averaged signal from the Cosmic Dawn by the EDGES experiment in 2018, a number of experiments have been set up to verify this result. This paper discusses the design process used for global 21~cm experiments, focusing specifically on the Radio Experiment for the Analysis of Cosmic Hydrogen (REACH). This experiment will seek to understand and compensate for systematic errors present using detailed modelling and characterization of the instrumentation. There is detailed the quantitative figures of merit and numerical modelling used to assist the design process of the REACH dipole antenna (one of the 2 antenna designs for REACH Phase I). This design process produced a 2.5:1 frequency bandwidth dipole. The aim of this design was to balance spectral smoothness and low impedance reflections with the ability to describe and understand the antenna response to the sky signal to inform the critically important calibration during observation and data analysis.
△ Less
Submitted 12 January, 2023; v1 submitted 21 September, 2021;
originally announced September 2021.
-
A beamforming approach to the self-calibration of phased arrays
Authors:
Quentin Gueuning,
Antony Brown,
Christophe Craeye,
Eloy de Lera Acedo
Abstract:
In this paper, we propose a beamforming method for the calibration of the direction-independent gain of the analog chains of aperture arrays. The gain estimates are obtained by cross-correlating the output voltage of each antenna with a voltage beamformed using the other antennas of the array. When the beamforming weights are equal to the average cross-correlated power, a relation is drawn with th…
▽ More
In this paper, we propose a beamforming method for the calibration of the direction-independent gain of the analog chains of aperture arrays. The gain estimates are obtained by cross-correlating the output voltage of each antenna with a voltage beamformed using the other antennas of the array. When the beamforming weights are equal to the average cross-correlated power, a relation is drawn with the StEFCal algorithm. An example illustrates this approach for few point sources and a 256-element array.
△ Less
Submitted 24 May, 2020;
originally announced May 2020.
-
SKA LFAA Station Design Report
Authors:
Eloy de Lera Acedo,
Hardie Pienaar,
Nima Razavi Ghods,
Jens Abraham,
Edgar Colin Beltran,
Ben Mort,
Fred Dulwich,
Giuseppe Virone,
Benedetta Fiorelli,
Michiel Arts,
Christophe Craeye,
Bui van Ha,
Keith Grainge,
Peter Dewdney,
Jeff Wagg,
Maria Grazia Labate,
Andrew Faulkner,
Jan Geralt bij de Vaate,
Marchel Gerbers
Abstract:
This report was submitted as part of the SKA Low Frequency Aperture Array Critical Design Review describing the design of the SKA1-LOW station that took place between 2013 and 2018.
The SKA1 LOW field station is inscribed in a circular area having an effective station diameter (centre to centre) of 38 meters and has 256 SKALA4 elements. This document describes the electromagnetic design of the f…
▽ More
This report was submitted as part of the SKA Low Frequency Aperture Array Critical Design Review describing the design of the SKA1-LOW station that took place between 2013 and 2018.
The SKA1 LOW field station is inscribed in a circular area having an effective station diameter (centre to centre) of 38 meters and has 256 SKALA4 elements. This document describes the electromagnetic design of the field station. In particular it describes the layout design and the electromagnetic modelling and characteristics of the station. This document describes the effects associated with the layout and array such as mutual coupling effects, side lobe pattern and beam shape (eg. smoothness, calibration models) and presents the state of the art of our ability to measure the array performance and validate the simulation work. The current LFAA field node requirements, derived from the SKA L1 requirements, have evolved over the last years since the LFAA PDR and the System Baseline Design. The SKA1 LOW field station has been designed to meet those requirements and has therefore tracked their evolution (eg. sensitivity requirements, array diameter, etc.). The aforementioned requirements represent a very tight space with a desire for very high sensitivity over a large frequency range (7 to 1) and wide field of view (90 degrees cone around zenith) while kee** the station diameter to a minimum, so as the filling factor but at the same time allowing for sufficient space between antennas to allow for easy maintenances, amongst many others. This results in a complex design.
△ Less
Submitted 23 April, 2020; v1 submitted 28 March, 2020;
originally announced March 2020.
-
Modal characterization of thermal emitters using the Method of Moments
Authors:
Denis Tihon,
Stafford Withington,
Christophe Craeye
Abstract:
Electromagnetic sources relying on spontaneous emission are difficult to characterize without a proper framework due to the partial spatial coherence of the emitted fields. In this paper, we propose to characterize emitters of any shape through their natural emitting modes, i.e. a set of coherent modes that add up incoherently. The resulting framework is very intuitive since any emitter is regarde…
▽ More
Electromagnetic sources relying on spontaneous emission are difficult to characterize without a proper framework due to the partial spatial coherence of the emitted fields. In this paper, we propose to characterize emitters of any shape through their natural emitting modes, i.e. a set of coherent modes that add up incoherently. The resulting framework is very intuitive since any emitter is regarded as a multimode antenna with zero correlation between modes. Moreover, for any finite emitter, the modes form a compact set that can be truncated. Each significant mode corresponds to one independent degree of freedom through which the emitter radiates power. The proposed formalism is implemented using the Method of Moments (MoM) and applied to a lossy sphere and a lossy ellipsoid. It is shown that electrically small structures can be characterized with a small number of modes, and that this number grows as the structure becomes electrically large.
△ Less
Submitted 17 January, 2020;
originally announced January 2020.
-
An Ultra-wideband Battery-less Positioning System for Space Applications
Authors:
Davide Dardari,
Nicolò Decarli,
Davide Fabbri,
Anna Guerra,
Marco Fantuzzi,
Diego Masotti,
Alessandra Costanzo,
Aldo Romani,
Maxime Drouguet,
Thomas Feuillen,
Christopher Raucy,
Luc Vandendorpe,
Christophe Craeye
Abstract:
An ultra-wide bandwidth (UWB) remote-powered positioning system for potential use in tracking floating objects inside space stations is presented. It makes use of battery-less tags that are powered-up and addressed through wireless power transfer in the UHF band and embed an energy efficient pulse generator in the 3-5 GHz UWB band. The system has been mounted on the ESA Mars Rover prototype to dem…
▽ More
An ultra-wide bandwidth (UWB) remote-powered positioning system for potential use in tracking floating objects inside space stations is presented. It makes use of battery-less tags that are powered-up and addressed through wireless power transfer in the UHF band and embed an energy efficient pulse generator in the 3-5 GHz UWB band. The system has been mounted on the ESA Mars Rover prototype to demonstrate its functionality and performance. Experimental results show the feasibility of centimeter-level localization accuracy at distances larger than 10 meters, with the capability of determining the position of multiple tags using a 2W-ERP power source in the UHF RFID frequency band.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
All-analytical evaluation of the singular integrals involved in the Method of Moments
Authors:
Denis Tihon,
Christophe Craeye
Abstract:
Surface Integral Equation (SIE) methods routinely require the integration of the singular Green's function or its gradient over Basis Functions (BF) and Testing Functions (TF). Many techniques have been described in the literature for the fast and accurate computation of these integrals for TF that is located close to the BF. In this paper, we propose an all-analytical formula for the singular par…
▽ More
Surface Integral Equation (SIE) methods routinely require the integration of the singular Green's function or its gradient over Basis Functions (BF) and Testing Functions (TF). Many techniques have been described in the literature for the fast and accurate computation of these integrals for TF that is located close to the BF. In this paper, we propose an all-analytical formula for the singular part of the integral for both the Electric and Magnetic Field Integral Equations (EFIE and MFIE). The method works for any flat polygonal BF and TF of any order, and proves to be competitive with existing techniques.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
-
Numerically stable eigenmode extraction in 3D periodic metamaterials
Authors:
Denis Tihon,
Valentina Sozio,
Nilufer A. Ozdemir,
Matteo Albani,
Christophe Craeye
Abstract:
A numerical method is presented to compute the eigenmodes supported by three dimensional (3D) metamaterials using the Method of Moments (MoM). The method relies on interstitial equivalent currents between layers. First, a parabolic formulation is presented. Then, we present an iterative technique that can be used to linearize the problem. In this way, all the eigenmodes characterized by their tran…
▽ More
A numerical method is presented to compute the eigenmodes supported by three dimensional (3D) metamaterials using the Method of Moments (MoM). The method relies on interstitial equivalent currents between layers. First, a parabolic formulation is presented. Then, we present an iterative technique that can be used to linearize the problem. In this way, all the eigenmodes characterized by their transmission coefficients and equivalent interstitial currents can be found using a simple eigenvalue decomposition of a matrix. The accuracy that can be achieved is only limited by the quality of simulation, and we demonstrate that the error introduced when linearizing the problem decreases doubly exponentially with respect to the time devoted to the iterative process. We also draw a mathematical link and distinguish the proposed method from other transfer-matrix based methods available in the literature.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
-
The radioscience LaRa instrument onboard ExoMars 2020 to investigate the rotation and interior of Mars
Authors:
Veronique Dehant,
Sebastien Le Maistre,
Rose-Marie Baland,
Nicolas Bergeot,
Ozgur Karatekin,
Marie-Julie Peters,
Attilio Rivoldini,
Luca Ruiz Lozano,
Orkun Temel,
Tim Van Hoolst,
Marie Yseboodt,
Michel Mitrovic,
Alexander Kosov,
Vaclav Valenta,
Lieven Thomassen,
Sumit Karki,
Khaldoun Al Khalifeh,
Christophe Craeye,
Leonid Gurvits,
Jean-Charles Marty,
Sami Asmar,
William Folkner,
the LaRa Team
Abstract:
LaRa (Lander Radioscience) is an experiment on the ExoMars 2020 mission that uses the Doppler shift on the radio link due to the motion of the ExoMars platform tied to the surface of Mars with respect to the Earth ground stations (e.g. the deep space network stations of NASA), in order to precisely measure the relative velocity of the lander on Mars with respect to the Earth. The LaRa measurements…
▽ More
LaRa (Lander Radioscience) is an experiment on the ExoMars 2020 mission that uses the Doppler shift on the radio link due to the motion of the ExoMars platform tied to the surface of Mars with respect to the Earth ground stations (e.g. the deep space network stations of NASA), in order to precisely measure the relative velocity of the lander on Mars with respect to the Earth. The LaRa measurements shall improve the understanding of the structure and processes in the deep interior of Mars by obtaining the rotation and orientation of Mars with a better precision compared to the previous missions. In this paper, we provide the analysis done until now for the best realization of these objectives. We explain the geophysical observation that will be reached with LaRa (Length-of-day variations, precession, nutation, and possibly polar motion). We develop the experiment set up, which includes the ground stations on Earth (so-called ground segment). We describe the instrument, i.e. the transponder and its three antennas. We further detail the link budget and the expected noise level that will be reached. Finally, we detail the expected results, which encompasses the explanation of how we shall determine Mars' orientation parameters, and the way we shall deduce Mars' interior structure and Mars' atmosphere from them. Lastly, we explain briefly how we will be able to determine the Surface platform position.
△ Less
Submitted 10 October, 2019; v1 submitted 9 October, 2019;
originally announced October 2019.
-
Geometrical MoM formulation for eigenmode analysis
Authors:
Denis Tihon,
Christophe Craeye
Abstract:
The resonant frequencies of a structure and the associated field distributions are generally determined by solving a non-linear eigenvalue problem. Using frequency-domain solvers, the response of the structure needs to be evaluated at many different frequencies in order to solve the non-linear problem. Moreover, these frequencies may be complex, the inverse of the imaginary part physically corresp…
▽ More
The resonant frequencies of a structure and the associated field distributions are generally determined by solving a non-linear eigenvalue problem. Using frequency-domain solvers, the response of the structure needs to be evaluated at many different frequencies in order to solve the non-linear problem. Moreover, these frequencies may be complex, the inverse of the imaginary part physically corresponding to the e-folding time of the energy of the mode. In this paper, we propose to use the so-called "Geometrical Method of Moments" (GMoM) to accelerate the computation of the resonant frequencies of a structure using the Method of Moments. First, purely geometrical reaction integrals are precomputed, which do not depend on the frequency nor material parameters. Then, by summing these terms with proper weights, the impedance matrix can be obtained for any complex frequency. This method easily accommodates for dispersive materials provided that the permittivity and permeability of the material can be extrapolated to complex frequencies.
△ Less
Submitted 4 June, 2019;
originally announced June 2019.
-
Identification of the absorption processes in periodic plasmonic structures using Energy Absorption Interferometry
Authors:
Denis Tihon,
Stafford Withington,
Christopher N. Thomas,
Christophe Craeye
Abstract:
Power dissipation in electromagnetic absorbers is a quadratic function of the incident fields. To characterize an absorber, one needs to deal with the coupling that may occur between different excitations. Energy Absorption Interferometry (EAI) is a technique that highlights the independent degrees of freedom through which a structure can absorb energy: the natural absorption modes of the structur…
▽ More
Power dissipation in electromagnetic absorbers is a quadratic function of the incident fields. To characterize an absorber, one needs to deal with the coupling that may occur between different excitations. Energy Absorption Interferometry (EAI) is a technique that highlights the independent degrees of freedom through which a structure can absorb energy: the natural absorption modes of the structure. The coupling between these modes vanishes. In this paper, we use the EAI formalism to analyse different kinds of plasmonic periodic absorbers while rigorously accounting for the coupling: resonant golden patches on a grounded dielectric slab, parallel free-standing silver wires and a silver slab of finite thickness. The EAI formalism is used to identify the physical processes that mediate absorption in the near and far field. First, we demonstrate that the angular absorption, which is classically used to characterize periodic absorbers in the far field and which neglects the coupling between different plane waves, is only valid under stringent conditions (subwavelength periodicity, far field excitation and negligible coupling between the two possible polarizations). Using EAI, we show how the dominant absorption channels can be identified through the signature of the absorption modes of the structure, while rigorously accounting for the coupling. We then exploit these channels to improve absorption. We show that long-range processes can be exploited to enhance the spatial selectivity, while short-range processes can be exploited to improve absorptivity over wide angles of incidence. Lastly, we show that simply adding scatterers with the proper periodicity on top of the absorber, the absorption can be increased by more than one order of magnitude.
△ Less
Submitted 28 November, 2019; v1 submitted 19 July, 2018;
originally announced July 2018.
-
Exploring to learn visual saliency: The RL-IAC approach
Authors:
Celine Craye,
Timothee Lesort,
David Filliat,
Jean-Francois Goudou
Abstract:
The problem of object localization and recognition on autonomous mobile robots is still an active topic. In this context, we tackle the problem of learning a model of visual saliency directly on a robot. This model, learned and improved on-the-fly during the robot's exploration provides an efficient tool for localizing relevant objects within their environment. The proposed approach includes two i…
▽ More
The problem of object localization and recognition on autonomous mobile robots is still an active topic. In this context, we tackle the problem of learning a model of visual saliency directly on a robot. This model, learned and improved on-the-fly during the robot's exploration provides an efficient tool for localizing relevant objects within their environment. The proposed approach includes two intertwined components. On the one hand, we describe a method for learning and incrementally updating a model of visual saliency from a depth-based object detector. This model of saliency can also be exploited to produce bounding box proposals around objects of interest. On the other hand, we investigate an autonomous exploration technique to efficiently learn such a saliency model. The proposed exploration, called Reinforcement Learning-Intelligent Adaptive Curiosity (RL-IAC) is able to drive the robot's exploration so that samples selected by the robot are likely to improve the current model of saliency. We then demonstrate that such a saliency model learned directly on a robot outperforms several state-of-the-art saliency techniques, and that RL-IAC can drastically decrease the required time for learning a reliable saliency model.
△ Less
Submitted 2 April, 2018;
originally announced April 2018.
-
Main Beam Modeling for Large Irregular Arrays: The SKA1-LOW telescope case
Authors:
Ha Bui-Van,
Christophe Craeye,
Eloy de Lera Acedo
Abstract:
Large radio telescopes in the 21st century such as the Low-Frequency Array (LOFAR) or the Murchison Widefield Array (MWA) make use of phased aperture arrays of antennas to achieve superb survey speeds. The Square Kilometer Array low frequency instrument (SKA1-LOW) will consist of a collection of non-regular phased array systems. The prediction of the main beam of these arrays using a few coefficie…
▽ More
Large radio telescopes in the 21st century such as the Low-Frequency Array (LOFAR) or the Murchison Widefield Array (MWA) make use of phased aperture arrays of antennas to achieve superb survey speeds. The Square Kilometer Array low frequency instrument (SKA1-LOW) will consist of a collection of non-regular phased array systems. The prediction of the main beam of these arrays using a few coefficients is crucial for the calibration of the telescope. An effective approach to model the main beam and first few sidelobes for large non-regular arrays is presented. The approach exploits Zernike polynomials to represent the array pattern. Starting from the current defined on an equivalence plane located just above the array, the pattern is expressed as a sum of Fourier transforms of Zernike functions of different orders. The coefficients for Zernike polynomials are derived by two different means: least-squares and analytical approaches. The analysis shows that both approaches provide a similar performance for representing the main beam and first few sidelobes. Moreover, numerical results for different array configurations are provided, which demonstrate the performance of the proposed method, also for arrays with shapes far from circular.
△ Less
Submitted 5 December, 2017; v1 submitted 29 May, 2017;
originally announced May 2017.
-
Fast and Accurate Simulation Technique for Large Irregular Arrays
Authors:
Ha Bui-Van,
Jens Abraham,
Michel Arts,
Quentin Gueuning,
Christopher Raucy,
David Gonzalez-Ovejero,
Eloy de Lera Acedo,
Christophe Craeye
Abstract:
A fast full-wave simulation technique is presented for the analysis of large irregular planar arrays of identical 3-D metallic antennas. The solution method relies on the Macro Basis Functions (MBF) approach and an interpolatory technique to compute the interactions between MBFs. The Harmonic-polynomial (HARP) model is established for the near-field interactions in a modified system of coordinates…
▽ More
A fast full-wave simulation technique is presented for the analysis of large irregular planar arrays of identical 3-D metallic antennas. The solution method relies on the Macro Basis Functions (MBF) approach and an interpolatory technique to compute the interactions between MBFs. The Harmonic-polynomial (HARP) model is established for the near-field interactions in a modified system of coordinates. For extremely large arrays made of complex antennas, two approaches assuming a limited radius of influence for mutual coupling are considered: one is based on a sparse-matrix LU decomposition and the other one on a tessellation of the array in the form of overlap** sub-arrays. The computation of all embedded element patterns is sped up with the help of the non-uniform FFT algorithm. Extensive validations are shown for arrays of log-periodic antennas envisaged for the low-frequency SKA (Square Kilometer Array) radio-telescope. The analysis of SKA stations with such a large number of elements has not been treated yet in the literature. Validations include comparison with results obtained with commercial software and with experiments. The proposed method is particularly well suited to array synthesis, in which several orders of magnitude can be saved in terms of computation time.
△ Less
Submitted 13 February, 2017;
originally announced February 2017.
-
Characterization of Power Absorption Response of Periodic 3D Structures to Partially Coherent Fields
Authors:
Denis Tihon,
Stafford Withington,
Christopher N. Thomas,
Christophe Craeye
Abstract:
In many applications of absorbing structures it is important to understand their spatial response to incident fields, for example in thermal solar panels, bolometric imaging and controlling radiative heat transfer. In practice, the illuminating field often originates from thermal sources and is only spatially partially coherent when reaching the absorbing device. In this paper, we present a method…
▽ More
In many applications of absorbing structures it is important to understand their spatial response to incident fields, for example in thermal solar panels, bolometric imaging and controlling radiative heat transfer. In practice, the illuminating field often originates from thermal sources and is only spatially partially coherent when reaching the absorbing device. In this paper, we present a method to fully characterize the way a structure can absorb such partially coherent fields. The method is presented for any 3D material and accounts for the partial coherence and partial polarization of the incident light. This characterization can be achieved numerically using simulation results or experimentally using the Energy Absorption Interferometry (EAI) that has been described previously in the literature. The absorbing structure is characterized through a set of absorbing functions, onto which any partially coherent field can be projected. This set is compact for any structure of finite extent and the absorbing function discrete for periodic structures.
△ Less
Submitted 22 November, 2016;
originally announced November 2016.
-
Driver distraction detection and recognition using RGB-D sensor
Authors:
Céline Craye,
Fakhri Karray
Abstract:
Driver inattention assessment has become a very active field in intelligent transportation systems. Based on active sensor Kinect and computer vision tools, we have built an efficient module for detecting driver distraction and recognizing the type of distraction. Based on color and depth map data from the Kinect, our system is composed of four sub-modules. We call them eye behavior (detecting gaz…
▽ More
Driver inattention assessment has become a very active field in intelligent transportation systems. Based on active sensor Kinect and computer vision tools, we have built an efficient module for detecting driver distraction and recognizing the type of distraction. Based on color and depth map data from the Kinect, our system is composed of four sub-modules. We call them eye behavior (detecting gaze and blinking), arm position (is the right arm up, down, right of forward), head orientation, and facial expressions. Each module produces relevant information for assessing driver inattention. They are merged together later on using two different classification strategies: AdaBoost classifier and Hidden Markov Model. Evaluation is done using a driving simulator and 8 drivers of different gender, age and nationality for a total of more than 8 hours of recording. Qualitative and quantitative results show strong and accurate detection and recognition capacity (85% accuracy for the type of distraction and 90% for distraction detection). Moreover, each module is obtained independently and could be used for other types of inference, such as fatigue detection, and could be implemented for real cars systems.
△ Less
Submitted 1 February, 2015;
originally announced February 2015.
-
An integral-equation method using interstitial currents devoted to the analysis of multilayered periodic structures with complex inclusions
Authors:
Nilufer A. Ozdemir,
Christophe Craeye
Abstract:
An efficient surface integral equation-based method is proposed for the analysis of electromagnetic scattering from multilayered media containing complex periodic inclusions. The proposed method defines equivalent currents at the interfaces between layers in order to eliminate the need to compute the layered medium Green's function. Hence, the background medium in a given layer can be treated as a…
▽ More
An efficient surface integral equation-based method is proposed for the analysis of electromagnetic scattering from multilayered media containing complex periodic inclusions. The proposed method defines equivalent currents at the interfaces between layers in order to eliminate the need to compute the layered medium Green's function. Hence, the background medium in a given layer can be treated as a homogeneous unbounded medium for which the computation of the Green's function for an infinite doubly periodic array is sufficient. The resulting method-of-moments interaction matrix has a block tridiagonal structure, which leads to computational complexity proportional to the number of layers for both matrix filling and solution. When all layers are identical, the filling time essentially reduces to that of a single layer, and the interaction matrix has a Toeplitz structure. Numerical results are provided for the reflectivity of multilayered periodic arrays of spherical silver core-silica shell nanoparticles, excited by a plane wave at optical frequencies. Comparisons with results obtained with an FDTD-based commercial software validate the accuracy and efficiency of the proposed method.
△ Less
Submitted 17 August, 2014;
originally announced August 2014.
-
Statistics of the MLE and Approximate Upper and Lower Bounds - Part 1: Application to TOA Estimation
Authors:
Achraf Mallat,
Sinan Gezici,
Davide Dardari,
Christophe Craeye,
Luc Vandendorpe
Abstract:
In nonlinear deterministic parameter estimation, the maximum likelihood estimator (MLE) is unable to attain the Cramer-Rao lower bound at low and medium signal-to-noise ratios (SNR) due the threshold and ambiguity phenomena. In order to evaluate the achieved mean-squared-error (MSE) at those SNR levels, we propose new MSE approximations (MSEA) and an approximate upper bound by using the method of…
▽ More
In nonlinear deterministic parameter estimation, the maximum likelihood estimator (MLE) is unable to attain the Cramer-Rao lower bound at low and medium signal-to-noise ratios (SNR) due the threshold and ambiguity phenomena. In order to evaluate the achieved mean-squared-error (MSE) at those SNR levels, we propose new MSE approximations (MSEA) and an approximate upper bound by using the method of interval estimation (MIE). The mean and the distribution of the MLE are approximated as well. The MIE consists in splitting the a priori domain of the unknown parameter into intervals and computing the statistics of the estimator in each interval. Also, we derive an approximate lower bound (ALB) based on the Taylor series expansion of noise and an ALB family by employing the binary detection principle. The accurateness of the proposed MSEAs and the tightness of the derived approximate bounds are validated by considering the example of time-of-arrival estimation.
△ Less
Submitted 19 May, 2014;
originally announced May 2014.
-
Contour-FFT based Spectral Domain MBF Analysis of Large Printed Antenna Arrays
Authors:
Shambhu Nath Jha,
Christophe Craeye
Abstract:
A fast spectral-domain method is proposed to evaluate the reaction terms between the Macro Basis Functions in regular and non-regular arrays made of identical printed antennas. The presented technique first exploits the filtering capabilities of the Macro Basis Functions in the spectral domain. The method is then strongly accelerated with the help of a newly formulated Fast Fourier Transform-based…
▽ More
A fast spectral-domain method is proposed to evaluate the reaction terms between the Macro Basis Functions in regular and non-regular arrays made of identical printed antennas. The presented technique first exploits the filtering capabilities of the Macro Basis Functions in the spectral domain. The method is then strongly accelerated with the help of a newly formulated Fast Fourier Transform-based technique, which is applicable to a contour integration in the complex plane. We name the method as Contour-FFT or C-FFT. Besides an effective homogeneous medium term treated with multipoles, a computational complexity of order N log_2 N is achieved for the the tabulation of substrate-related reaction terms for any possible relative positions. The complexity of the proposed method is independent from the complexity of the elements. Numerical results obtained with the proposed method are compared with those from a pre-validated reference solution based on the traditional Macro Basis Functions technique; an excellent agreement is observed.
△ Less
Submitted 28 April, 2014;
originally announced April 2014.
-
Characteristic Functions Describing the Power Absorption Response of Periodic Structures to Partially Coherent Fields
Authors:
Christophe Craeye,
Stafford Withington,
Christopher N. Thomas
Abstract:
Many new types of sensing or imaging surfaces are based on periodic thin films. It is explained how the response of those surfaces to partially coherent fields can be fully characterized by a set of functions in the wavenumber spectrum domain. The theory is developed here for the case of 2D absorbers with TE illumination and arbitrary material properties in the plane of the problem, except for the…
▽ More
Many new types of sensing or imaging surfaces are based on periodic thin films. It is explained how the response of those surfaces to partially coherent fields can be fully characterized by a set of functions in the wavenumber spectrum domain. The theory is developed here for the case of 2D absorbers with TE illumination and arbitrary material properties in the plane of the problem, except for the resistivity which is assumed isotropic. Sum and difference coordinates in both spatial and spectral domains are conveniently used to represent the characteristic functions, which are specialized here to the case of periodic structures. Those functions can be either computed or obtained experimentally. Simulations rely on solvers based on periodic-boundary conditions, while experiments correspond to Energy Absorption Interferometry (EAI), already described in the literature. We derive rules for the convergence of the representation versus the number of characteristic functions used, as well as for the sampling to be considered in EAI experiments. Numerical examples are given for the case of absorbing strips printed on a semi-infinite substrate.
△ Less
Submitted 28 January, 2014;
originally announced January 2014.
-
Further Comment on 'Encoding many channels on the same frequency through radio vorticity: first experimental test'
Authors:
Michele Tamagnone,
Christophe Craeye,
Julien Perruisseau-Carrier
Abstract:
We show that the reply by Tamburini et al (2012 New J. Phys. 14 118002) to our previous comment (2012 New J. Phys. 14 118001) on the experiment reported in (2012 New J. Phys. 14 033001) actually does not invalidate any of the issues raised in our initial comment.
We show that the reply by Tamburini et al (2012 New J. Phys. 14 118002) to our previous comment (2012 New J. Phys. 14 118001) on the experiment reported in (2012 New J. Phys. 14 033001) actually does not invalidate any of the issues raised in our initial comment.
△ Less
Submitted 30 July, 2013; v1 submitted 17 February, 2013;
originally announced February 2013.
-
Comment on 'Encoding many channels on the same frequency through radio vorticity: first experimental test'
Authors:
Michele Tamagnone,
Christophe Craeye,
Julien Perruisseau-Carrier
Abstract:
We show that the public experiment held in Venice by F. Tamburini et al and reported in (2012 New J. Phys. 14 033001) can be regarded as a particular implementation of Multiple-Input Multiple-Output (MIMO) communications, hence bringing no advantages with respect to known techniques. Moreover, we explain that the use of a 'vortex' mode (orbital angular momentum OAM l = 1) at one of the transmit an…
▽ More
We show that the public experiment held in Venice by F. Tamburini et al and reported in (2012 New J. Phys. 14 033001) can be regarded as a particular implementation of Multiple-Input Multiple-Output (MIMO) communications, hence bringing no advantages with respect to known techniques. Moreover, we explain that the use of a 'vortex' mode (orbital angular momentum OAM l = 1) at one of the transmit antennas is not necessary to encode different channels since only different patterns -or similarly different pointing angles- of the transmit antennas are required. Finally, we identify why this MIMO transmission allowed decoding of two signals despite being line-of-sight. This is due to the large separation between the receiving antennas, which places the transmit antennas in the near-field Fresnel region of the receiving 'array'. This strongly limits the application of this technique in practice, since, for a fixed separation between receiving antennas, the detectable signal power from any additional vortex mode decays at least as 1/r^4.
△ Less
Submitted 19 October, 2012;
originally announced October 2012.
