-
Euclid: Forecast constraints on consistency tests of the $Λ$CDM model
Authors:
S. Nesseris,
D. Sapone,
M. Martinelli,
D. Camarena,
V. Marra,
Z. Sakr,
J. Garcia-Bellido,
C. J. A. P. Martins,
C. Clarkson,
A. Da Silva,
P. Fleury,
L. Lombriser,
J. P. Mimoso,
S. Casas,
V. Pettorino,
I. Tutusaus,
A. Amara,
N. Auricchio,
C. Bodendorf,
D. Bonino,
E. Branchini,
M. Brescia,
V. Capobianco,
C. Carbone,
J. Carretero
, et al. (90 additional authors not shown)
Abstract:
The standard cosmological model is based on the fundamental assumptions of a spatially homogeneous and isotropic universe on large scales. An observational detection of a violation of these assumptions at any redshift would immediately indicate the presence of new physics. We quantify the ability of the Euclid mission, together with contemporary surveys, to improve the current sensitivity of null…
▽ More
The standard cosmological model is based on the fundamental assumptions of a spatially homogeneous and isotropic universe on large scales. An observational detection of a violation of these assumptions at any redshift would immediately indicate the presence of new physics. We quantify the ability of the Euclid mission, together with contemporary surveys, to improve the current sensitivity of null tests of the canonical cosmological constant $Λ$ and the cold dark matter (LCDM) model in the redshift range $0<z<1.8$. We considered both currently available data and simulated Euclid and external data products based on a LCDM fiducial model, an evolving dark energy model assuming the Chevallier-Polarski-Linder (CPL) parameterization or an inhomogeneous Lemaître-Tolman-Bondi model with a cosmological constant $Λ$ (LLTB), and carried out two separate but complementary analyses: a machine learning reconstruction of the null tests based on genetic algorithms, and a theory-agnostic parametric approach based on Taylor expansion and binning of the data, in order to avoid assumptions about any particular model. We find that in combination with external probes, Euclid can improve current constraints on null tests of the LCDM by approximately a factor of three when using the machine learning approach and by a further factor of two in the case of the parametric approach. However, we also find that in certain cases, the parametric approach may be biased against or missing some features of models far from LCDM. Our analysis highlights the importance of synergies between Euclid and other surveys. These synergies are crucial for providing tighter constraints over an extended redshift range for a plethora of different consistency tests of some of the main assumptions of the current cosmological paradigm.
△ Less
Submitted 22 February, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
Discovery of Strongly Lensed Quasars in the Ultraviolet Near Infrared Optical Northern Survey (UNIONS)
Authors:
J. H. H. Chan,
C. Lemon,
F. Courbin,
R. Gavazzi,
B. Clément,
M. Millon,
E. Paic,
K. Rojas,
E. Savary,
G. Vernardos,
J. -C. Cuillandre,
S. Fabbro,
S. Gwyn,
M. J. Hudson,
M. Kilbinger,
A. McConnachie
Abstract:
We report the discovery of five new doubly-imaged lensed quasars from the first 2500 square degrees of the ongoing Canada-France Imaging Survey (CFIS), which is a component of the Ultraviolet Near Infrared Optical Northern Survey (UNIONS), selected from initial catalogues of either Gaia pairs or MILLIQUAS quasars. We take advantage of the deep, 0.6'' median-seeing $r$-band imaging of CFIS to confi…
▽ More
We report the discovery of five new doubly-imaged lensed quasars from the first 2500 square degrees of the ongoing Canada-France Imaging Survey (CFIS), which is a component of the Ultraviolet Near Infrared Optical Northern Survey (UNIONS), selected from initial catalogues of either Gaia pairs or MILLIQUAS quasars. We take advantage of the deep, 0.6'' median-seeing $r$-band imaging of CFIS to confirm the presence of multiple point sources with similar colour of $u-r$, via convolution of the Laplacian of the point spread function. Requiring similar-colour point sources with flux ratios less than 2.5 mag in $r$-band, reduces the number of candidates from 256314 to 7815. After visual inspection we obtain 30 high-grade candidates, and prioritise spectroscopic follow-up for those showing signs of a lensing galaxy upon subtraction of the point sources. We obtain long-slit spectra for 18 candidates with ALFOSC on the 2.56-m Nordic Optical Telescope (NOT), confirming five new doubly lensed quasars with $1.21<z<3.36$ and angular separations from 0.8'' to 2.5''. One additional system is a probable lensed quasar based on the CFIS imaging and existing SDSS spectrum. We further classify six objects as nearly identical quasars -- still possible lenses but without the detection of a lensing galaxy. Given our recovery rate ($83\%$) of existing optically bright lenses within the CFIS footprint, we expect that a similar strategy, coupled with $u-r$ colour-selection from CFIS alone, will provide an efficient and complete discovery of small-separation lensed quasars of source redshifts below $z=2.7$ within the CFIS $r$-band magnitude limit of 24.1 mag.
△ Less
Submitted 1 December, 2021; v1 submitted 18 October, 2021;
originally announced October 2021.
-
Constraining quasar structure using high-frequency microlensing variations and continuum reverberation
Authors:
E. Paic,
G. Vernardos,
D. Sluse,
M. Millon,
F. Courbin,
J. H. Chan,
V. Bonvin
Abstract:
Gravitational microlensing is a powerful tool to probe the inner structure of strongly lensed quasars and to constrain parameters of the stellar mass function of lens galaxies. This is done by analysing microlensing light curves between the multiple images of strongly lensed quasars, under the influence of three main variable components: 1- the continuum flux of the source, 2- microlensing by star…
▽ More
Gravitational microlensing is a powerful tool to probe the inner structure of strongly lensed quasars and to constrain parameters of the stellar mass function of lens galaxies. This is done by analysing microlensing light curves between the multiple images of strongly lensed quasars, under the influence of three main variable components: 1- the continuum flux of the source, 2- microlensing by stars in the lens galaxy and 3- reverberation of the continuum by the Broad Line Region (BLR). The latter, ignored by state-of-the-art microlensing techniques, can introduce high-frequency variations which we show carry information on the BLR size. We present a new method which includes all these components simultaneously and fits the power spectrum of the data in the Fourier space, rather than the observed light curve itself. In this new framework, we analyse COSMOGRAIL light curves of the two-image system QJ0158-4325 known to display high-frequency variations. Using exclusively the low frequency part of the power spectrum our constraint on the accretion disk radius agrees with the thin disk model estimate and previous work that fit the microlensing light curves in real space. However, if we also take into account the high-frequency variations, the data favour significantly smaller disk sizes than previous microlensing measurements. In this case, our results are in agreement with the thin disk model prediction only if we assume very low mean masses for the microlens population, i.e. <M> = 0.01 $M_\odot$. Eventually, including the differentially microlensed continuum reverberation by the BLR successfully explains the high frequencies without requiring such low mass microlenses. This allows us to measure, for the first time, the size of the BLR using single-band photometric monitoring, $R_{BLR}$ = $1.6^{+1.5}_{-0.8}\times 10^{17}$cm, in agreement with estimates using the BLR size-luminosity relation.
△ Less
Submitted 11 October, 2021;
originally announced October 2021.
-
Euclid preparation: XIX. Impact of magnification on photometric galaxy clustering
Authors:
F. Lepori,
I. Tutusaus,
C. Viglione,
C. Bonvin,
S. Camera,
F. J. Castander,
R. Durrer,
P. Fosalba,
G. Jelic-Cizmek,
M. Kunz,
J. Adamek,
S. Casas,
M. Martinelli,
Z. Sakr,
D. Sapone,
A. Amara,
N. Auricchio,
C. Bodendorf,
D. Bonino,
E. Branchini,
M. Brescia,
J. Brinchmann,
V. Capobianco,
C. Carbone,
J. Carretero
, et al. (161 additional authors not shown)
Abstract:
We investigate the importance of lensing magnification for estimates of galaxy clustering and its cross-correlation with shear for the photometric sample of Euclid. Using updated specifications, we study the impact of lensing magnification on the constraints and the shift in the estimation of the best fitting cosmological parameters that we expect if this effect is neglected. We follow the prescri…
▽ More
We investigate the importance of lensing magnification for estimates of galaxy clustering and its cross-correlation with shear for the photometric sample of Euclid. Using updated specifications, we study the impact of lensing magnification on the constraints and the shift in the estimation of the best fitting cosmological parameters that we expect if this effect is neglected. We follow the prescriptions of the official Euclid Fisher matrix forecast for the photometric galaxy clustering analysis and the combination of photometric clustering and cosmic shear. The slope of the luminosity function (local count slope), which regulates the amplitude of the lensing magnification, and the galaxy bias have been estimated from the Euclid Flagship simulation.We find that magnification significantly affects both the best-fit estimation of cosmological parameters and the constraints in the galaxy clustering analysis of the photometric sample. In particular, including magnification in the analysis reduces the 1$σ$ errors on $Ω_{\text{m},0}, w_{0}, w_a$ at the level of 20-35%, depending on how well we will be able to independently measure the local count slope. In addition, we find that neglecting magnification in the clustering analysis leads to shifts of up to 1.6$σ$ in the best-fit parameters. In the joint analysis of galaxy clustering, cosmic shear, and galaxy-galaxy lensing, magnification does not improve precision, but it leads to an up to 6$σ$ bias if neglected. Therefore, for all models considered in this work, magnification has to be included in the analysis of galaxy clustering and its cross-correlation with the shear signal ($3\times2$pt analysis) for an accurate parameter estimation.
△ Less
Submitted 30 June, 2022; v1 submitted 11 October, 2021;
originally announced October 2021.
-
J1721$+$8842: a gravitationally lensed binary quasar with a proximate damped Lyman-$α$ absorber
Authors:
C. Lemon,
M. Millon,
D. Sluse,
F. Courbin,
M. Auger,
J. Chan,
E. Paic,
A. Agnello
Abstract:
High-redshift binary quasars provide key insights into mergers and quasar activity, and are useful tools for probing the spatial kinematics and chemistry of galaxies along the line-of-sight. However, only three sub-10-kpc binaries have been confirmed above $z=1$. Gravitational lensing would provide a way to easily resolve such binaries, study them in higher resolution, and provide more sightlines,…
▽ More
High-redshift binary quasars provide key insights into mergers and quasar activity, and are useful tools for probing the spatial kinematics and chemistry of galaxies along the line-of-sight. However, only three sub-10-kpc binaries have been confirmed above $z=1$. Gravitational lensing would provide a way to easily resolve such binaries, study them in higher resolution, and provide more sightlines, though the required alignment with a massive foreground galaxy is rare. Through image deconvolution of StanCam Nordic Optical Telescope (NOT) monitoring data, we reveal two further point sources in the known, $z \approx 2.38$, quadruply lensed quasar (quad), J1721+8842. An ALFOSC/NOT long-slit spectrum shows that the brighter of these two sources is a quasar with $z = 2.369 \pm 0.007$ based on the C III] line, while the C III] redshift of the quad is $z = 2.364 \pm 0.003$. Lens modelling using point source positions rules out a single source model, favouring an isothermal lens mass profile with two quasar sources separated by $\sim6.0$ kpc (0.73$^{\prime \prime}$) in projection. Given the resolving ability from lensing and current lensed quasar statistics, this discovery suggests a large population of undiscovered, unlensed sub-10-kpc binaries. We also analyse spectra of two images of the quad, showing narrow Ly$α$ emission within the trough of a proximate damped Ly$α$ absorber (PDLA). An apparent mismatch between the continuum and narrow line flux ratios provides a new potential tool for simultaneously studying microlensing and the quasar host galaxy. Signs of the PDLA are also seen in the second source, however a deeper spectrum is still required to confirm this. Thanks to the multiple lines-of-sight from lensing and two quasar sources, this system offers simultaneous sub-parsec and kpc-scale probes of a PDLA.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Strong lens systems search in the Dark Energy Survey using Convolutional Neural Networks
Authors:
K. Rojas,
E. Savary,
B. Clément,
M. Maus,
F. Courbin,
C. Lemon,
J. H. H. Chan,
G. Vernardos,
R. Joseph,
R. Cañameras,
A. Galan
Abstract:
We performed a search for strong lens galaxy-scale systems in the first data release of the Dark Energy Survey (DES), from a color-selected parent sample of 18~745~029 Luminous Red Galaxies (LRGs). Our search was based on a Convolutional Neural Network (CNN) to grade our LRG selection with values between 0 (non-lens) and 1 (lens). Our training set was data-driven, i.e. using lensed sources taken f…
▽ More
We performed a search for strong lens galaxy-scale systems in the first data release of the Dark Energy Survey (DES), from a color-selected parent sample of 18~745~029 Luminous Red Galaxies (LRGs). Our search was based on a Convolutional Neural Network (CNN) to grade our LRG selection with values between 0 (non-lens) and 1 (lens). Our training set was data-driven, i.e. using lensed sources taken from HST COSMOS images and where the light distribution of the lens plane was taken directly from DES images of our LRGs. A total of 76~582 cutouts obtained a score above 0.9. These were visually inspected and resulted in two catalogs. The first one contains 405 lens candidates, where 90 present clear lensing features and counterparts, while the others 315 require more evidence, such as higher resolution images or spectra to be conclusive. A total of 186 candidates were totally new identified in this search. The second catalog includes 539 ring galaxy candidates that will be useful to train CNNs against this type of false positives. For the 90 best lens candidates we carried out color-based deblending of the lens and source light without fitting any analytical profile to the data. The method turned out to be very efficient in the deblending, even for very compact objects and for objects with very complex morphology. Finally, from the 90 best lens candidates we selected 52 systems having one single deflector, to test an automated modeling pipeline which successfully modeled 79\% of the sample within an acceptable amount of computing time.
△ Less
Submitted 31 August, 2021;
originally announced September 2021.
-
Euclid preparation: I. The Euclid Wide Survey
Authors:
R. Scaramella,
J. Amiaux,
Y. Mellier,
C. Burigana,
C. S. Carvalho,
J. -C. Cuillandre,
A. Da Silva,
A. Derosa,
J. Dinis,
E. Maiorano,
M. Maris,
I. Tereno,
R. Laureijs,
T. Boenke,
G. Buenadicha,
X. Dupac,
L. M. Gaspar Venancio,
P. Gómez-Álvarez,
J. Hoar,
J. Lorenzo Alvarez,
G. D. Racca,
G. Saavedra-Criado,
J. Schwartz,
R. Vavrek,
M. Schirmer
, et al. (216 additional authors not shown)
Abstract:
Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced s…
▽ More
Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced straylight, producing very crisp images. This paper presents the building of the Euclid reference survey: the sequence of pointings of EWS, Deep fields, Auxiliary fields for calibrations, and spacecraft movements followed by Euclid as it operates in a step-and-stare mode from its orbit around the Lagrange point L2. Each EWS pointing has four dithered frames; we simulate the dither pattern at pixel level to analyse the effective coverage. We use up-to-date models for the sky background to define the Euclid region-of-interest (RoI). The building of the reference survey is highly constrained from calibration cadences, spacecraft constraints and background levels; synergies with ground-based coverage are also considered. Via purposely-built software optimized to prioritize best sky areas, produce a compact coverage, and ensure thermal stability, we generate a schedule for the Auxiliary and Deep fields observations and schedule the RoI with EWS transit observations. The resulting reference survey RSD_2021A fulfills all constraints and is a good proxy for the final solution. Its wide survey covers 14,500 square degrees. The limiting AB magnitudes ($5σ$ point-like source) achieved in its footprint are estimated to be 26.2 (visible) and 24.5 (near-infrared); for spectroscopy, the H$_α$ line flux limit is $2\times 10^{-16}$ erg cm$^{-2}$ s$^{-1}$ at 1600 nm; and for diffuse emission the surface brightness limits are 29.8 (visible) and 28.4 (near-infrared) mag arcsec$^{-2}$.
△ Less
Submitted 2 August, 2021;
originally announced August 2021.
-
SLITronomy: towards a fully wavelet-based strong lensing inversion technique
Authors:
A. Galan,
A. Peel,
R. Joseph,
F. Courbin,
J. -L. Starck
Abstract:
Strong gravitational lensing provides a wealth of astrophysical information on the baryonic and dark matter content of galaxies. It also serves as a valuable cosmological probe by allowing us to measure the Hubble constant independently of other methods. These applications all require the difficult task of inverting the lens equation and simultaneously reconstructing the mass profile of the lens a…
▽ More
Strong gravitational lensing provides a wealth of astrophysical information on the baryonic and dark matter content of galaxies. It also serves as a valuable cosmological probe by allowing us to measure the Hubble constant independently of other methods. These applications all require the difficult task of inverting the lens equation and simultaneously reconstructing the mass profile of the lens along with the original light profile of the unlensed source. As there is no reason for either the lens or the source to be simple, we need methods that both invert the lens equation with a large number of degrees of freedom and also enforce a well-controlled regularisation that avoids the appearance of spurious structures. This can be beautifully accomplished by representing signals in wavelet space. Building on the Sparse Lens Inversion Technique (SLIT), in this work we present an improved sparsity-based method that describes lensed sources using wavelets and optimises over the parameters given an analytical lens mass profile. We apply our technique on simulated HST and E-ELT data, as well as on real HST images of lenses from the Sloan Lens ACS (SLACS) sample, assuming a lens model. We show that wavelets allow us to reconstruct lensed sources containing detailed substructures when using both present-day data and high-resolution images from future thirty-meter-class telescopes. Wavelets moreover provide a much more tractable solution in terms of quality and computation time compared to using a source model that combines smooth analytical profiles and shapelets. Requiring very little human interaction, our pixel-based technique fits into the effort to devise automated modelling schemes. It can be incorporated in the standard workflow of sampling analytical lens model parameters. The method, which we call SLITronomy, is freely available as a new plug-in to the modelling software Lenstronomy.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
-
Measuring accretion disk sizes of lensed quasars with microlensing time delay in multi-band light curves
Authors:
J. H. H. Chan,
K. Rojas,
M. Millon,
F. Courbin,
V. Bonvin,
G. Jauffret
Abstract:
Time-delay cosmography in strongly lensed quasars offer an independent way of measuring the Hubble constant, $H_0$. However, it has been proposed that the combination of microlensing and source-size effects, also known as microlensing time delay can potentially increase the uncertainty in time-delay measurements as well as lead to a biased time delay. In this work, we first investigate how microle…
▽ More
Time-delay cosmography in strongly lensed quasars offer an independent way of measuring the Hubble constant, $H_0$. However, it has been proposed that the combination of microlensing and source-size effects, also known as microlensing time delay can potentially increase the uncertainty in time-delay measurements as well as lead to a biased time delay. In this work, we first investigate how microlensing time delay changes with assumptions on the initial mass function (IMF) and find that the more massive microlenses produce the sharper distributions of microlensing time delays. We also find that the IMF has modest effect on the the magnification probability distributions. Second, we present a new method to measure the color-dependent source size in lensed quasars using the microlensing time delays inferred from multi-band light curves. In practice the relevant observable is the differential microlensing time delays between different bands. We show from simulation using the facility as Vera C. Rubin Observatory that if this differential time delay between bands can be measured with a precision of $0.1$ days in any given lensed image, the disk size can be recovered to within a factor of $2$. If four lensed images are used, our method is able to achieve an unbiased source measurement within error of the order of $20\%$, which is comparable with other techniques.
△ Less
Submitted 21 October, 2020; v1 submitted 28 July, 2020;
originally announced July 2020.
-
TDCOSMO IV: Hierarchical time-delay cosmography -- joint inference of the Hubble constant and galaxy density profiles
Authors:
S. Birrer,
A. J. Shajib,
A. Galan,
M. Millon,
T. Treu,
A. Agnello,
M. Auger,
G. C. -F. Chen,
L. Christensen,
T. Collett,
F. Courbin,
C. D. Fassnacht,
L. V. E. Koopmans,
P. J. Marshall,
J. -W. Park,
C. E. Rusu,
D. Sluse,
C. Spiniello,
S. H. Suyu,
S. Wagner-Carena,
K. C. Wong,
M. Barnabè,
A. S. Bolton,
O. Czoske,
X. Ding
, et al. (2 additional authors not shown)
Abstract:
The H0LiCOW collaboration inferred via gravitational lensing time delays a Hubble constant $H_0=73.3^{+1.7}_{-1.8}$ km s$^{-1}{\rm Mpc}^{-1}$, describing deflector mass density profiles by either a power-law or stars plus standard dark matter halos. The mass-sheet transform (MST) that leaves the lensing observables unchanged is considered the dominant source of residual uncertainty in $H_0$. We qu…
▽ More
The H0LiCOW collaboration inferred via gravitational lensing time delays a Hubble constant $H_0=73.3^{+1.7}_{-1.8}$ km s$^{-1}{\rm Mpc}^{-1}$, describing deflector mass density profiles by either a power-law or stars plus standard dark matter halos. The mass-sheet transform (MST) that leaves the lensing observables unchanged is considered the dominant source of residual uncertainty in $H_0$. We quantify any potential effect of the MST with flexible mass models that are maximally degenerate with H0. Our calculation is based on a new hierarchical approach in which the MST is only constrained by stellar kinematics. The approach is validated on hydrodynamically simulated lenses. We apply the method to the TDCOSMO sample of 7 lenses (6 from H0LiCOW) and measure $H_0=74.5^{+5.6}_{-6.1}$ km s$^{-1}{\rm Mpc}^{-1}$. In order to further constrain the deflector mass profiles, we then add imaging and spectroscopy for 33 strong gravitational lenses from the SLACS sample. For 9 of the SLAC lenses we use resolved kinematics to constrain the stellar anisotropy. From the joint analysis of the TDCOSMO+SLACS sample, we measure $H_0=67.4^{+4.1}_{-3.2}$ km s$^{-1}{\rm Mpc}^{-1}$, assuming that the TDCOSMO and SLACS galaxies are drawn from the same parent population. The blind H0LiCOW, TDCOSMO-only and TDCOSMO+SLACS analyses are in mutual statistical agreement. The TDCOSMO+SLACS analysis prefers marginally shallower mass profiles than H0LiCOW or TDCOSMO-only. While our new analysis does not statistically invalidate the mass profile assumptions by H0LiCOW, and thus their $H_0$ measurement relying on those, it demonstrates the importance of understanding the mass density profile of elliptical galaxies. The uncertainties on $H_0$ derived in this paper can be reduced by physical or observational priors on the form of the mass profile, or by additional data, chiefly spatially resolved kinematics of lens galaxies.
△ Less
Submitted 19 December, 2020; v1 submitted 6 July, 2020;
originally announced July 2020.
-
TDCOSMO II: 6 new time delays in lensed quasars from high-cadence monitoring at the MPIA 2.2m telescope
Authors:
M. Millon,
F. Courbin,
V. Bonvin,
E. Buckley-Geer,
C. D. Fassnacht,
J. Frieman,
P. J. Marshall,
S. H. Suyu,
T. Treu,
T. Anguita,
V. Motta,
A. Agnello,
J. H. H. Chan,
D. C. -Y Chao,
M. Chijani,
D. Gilman,
K. Gilmore,
C. Lemon,
J. R. Lucey,
A. Melo,
E. Paic,
K. Rojas,
D. Sluse,
P. R. Williams,
A. Hempel
, et al. (3 additional authors not shown)
Abstract:
We present six new time-delay measurements obtained from $R_c$-band monitoring data acquired at the Max Planck Institute for Astrophysics (MPIA) 2.2 m telescope at La Silla observatory between October 2016 and February 2020. The lensed quasars HE 0047-1756, WG 0214-2105, DES 0407-5006, 2M 1134-2103, PSJ 1606-2333 and DES 2325-5229 were observed almost daily at high signal-to-noise ratio to obtain…
▽ More
We present six new time-delay measurements obtained from $R_c$-band monitoring data acquired at the Max Planck Institute for Astrophysics (MPIA) 2.2 m telescope at La Silla observatory between October 2016 and February 2020. The lensed quasars HE 0047-1756, WG 0214-2105, DES 0407-5006, 2M 1134-2103, PSJ 1606-2333 and DES 2325-5229 were observed almost daily at high signal-to-noise ratio to obtain high-quality light curves where we can record fast and small-amplitude variations of the quasars. We measured time delays between all pairs of multiple images with only one or two seasons of monitoring with the exception of the time delays relative to image D of PSJ 1606-2333. The most precise estimate was obtained for the delay between image A and image B of DES 0407-5006, where $τ_{AB} = -128.4^{+3.5}_{-3.8}$ d (2.8% precision) including systematics due to extrinsic variability in the light curves. For HE 0047-1756, we combined our high-cadence data with measurements from decade-long light curves from previous COSMOGRAIL campaigns, and reach a precision of 0.9 d on the final measurement. The present work demonstrates the feasibility of measuring time delays in lensed quasars in only one or two seasons, provided high signal-to-noise ratio data are obtained at a cadence close to daily.
△ Less
Submitted 22 October, 2020; v1 submitted 17 June, 2020;
originally announced June 2020.
-
Time Delay Lens Modelling Challenge
Authors:
X. Ding,
T. Treu,
S. Birrer,
G. C. -F. Chen,
J. Coles,
P. Denzel,
M. Frigo A. Galan,
P. J. Marshall,
M. Millon,
A. More,
A. J. Shajib,
D. Sluse,
H. Tak,
D. Xu,
M. W. Auger,
V. Bonvin,
H. Chand,
F. Courbin,
G. Despali,
C. D. Fassnacht,
D. Gilman,
S. Hilbert,
S. R. Kumar,
Y. -Y. Lin,
J. W. Park
, et al. (4 additional authors not shown)
Abstract:
In recent years, breakthroughs in methods and data have enabled gravitational time delays to emerge as a very powerful tool to measure the Hubble constant $H_0$. However, published state-of-the-art analyses require of order 1 year of expert investigator time and up to a million hours of computing time per system. Furthermore, as precision improves, it is crucial to identify and mitigate systematic…
▽ More
In recent years, breakthroughs in methods and data have enabled gravitational time delays to emerge as a very powerful tool to measure the Hubble constant $H_0$. However, published state-of-the-art analyses require of order 1 year of expert investigator time and up to a million hours of computing time per system. Furthermore, as precision improves, it is crucial to identify and mitigate systematic uncertainties. With this time delay lens modelling challenge we aim to assess the level of precision and accuracy of the modelling techniques that are currently fast enough to handle of order 50 lenses, via the blind analysis of simulated datasets. The results in Rung 1 and Rung 2 show that methods that use only the point source positions tend to have lower precision ($10 - 20\%$) while remaining accurate. In Rung 2, the methods that exploit the full information of the imaging and kinematic datasets can recover $H_0$ within the target accuracy ($ |A| < 2\%$) and precision ($< 6\%$ per system), even in the presence of poorly known point spread function and complex source morphology. A post-unblinding analysis of Rung 3 showed the numerical precision of the ray-traced cosmological simulations to be insufficient to test lens modelling methodology at the percent level, making the results difficult to interpret. A new challenge with improved simulations is needed to make further progress in the investigation of systematic uncertainties. For completeness, we present the Rung 3 results in an appendix, and use them to discuss various approaches to mitigating against similar subtle data generation effects in future blind challenges.
△ Less
Submitted 17 February, 2021; v1 submitted 15 June, 2020;
originally announced June 2020.
-
H0LiCOW XI. A weak lensing measurement of the external convergence in the field of the lensed quasar B1608+656 using HST and Subaru deep imaging
Authors:
O. Tihhonova,
F. Courbin,
D. Harvey,
S. Hilbert,
A. Peel,
C. E. Rusu,
C. D. Fassnacht,
V. Bonvin,
P. J. Marshall,
G. Meylan,
D. Sluse,
S. H. Suyu,
T. Treu,
K. C. Wong
Abstract:
We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse…
▽ More
We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse regularization of the shear field. We find no substantial difference between the 2D mass reconstructions, but we find that the ground-based data is less sensitive to small-scale structures than the space-based observations. Marginalising over the results obtained with all the reconstruction techniques applied to the two available HST filters F606W and F814W, we estimate the external convergence, $κ_{\rm ext}$ at the position of B1608+656 is $κ_{\rm ext} = 0.11^{+0.06}_{-0.04}$, where the error bars corresponds respectively to the 16th and 84th quartiles. This result is compatible with previous estimates using the number-counts technique, suggesting that B1608+656 resides in an over-dense line of sight, but with a completely different technique. Using our mass reconstructions, we also compare the convergence at the position of several groups of galaxies in the field of B1608+656 with the mass measurements using various analytical mass profiles, and find that the weak lensing results favor truncated halo models.
△ Less
Submitted 25 May, 2020;
originally announced May 2020.
-
HOLISMOKES -- I. Highly Optimised Lensing Investigations of Supernovae, Microlensing Objects, and Kinematics of Ellipticals and Spirals
Authors:
S. H. Suyu,
S. Huber,
R. Cañameras,
M. Kromer,
S. Schuldt,
S. Taubenberger,
A. Yıldırım,
V. Bonvin,
J. H. H. Chan,
F. Courbin,
U. Nöbauer,
S. A. Sim,
D. Sluse
Abstract:
We present the HOLISMOKES programme on strong gravitational lensing of supernovae as a probe of supernova (SN) physics and cosmology. We investigate the effects of microlensing on early-phase SN Ia spectra using four different SN explosion models, and find that within 10 rest-frame days after SN explosion, distortions of SN Ia spectra due to microlensing are typically negligible ($<$1% distortion…
▽ More
We present the HOLISMOKES programme on strong gravitational lensing of supernovae as a probe of supernova (SN) physics and cosmology. We investigate the effects of microlensing on early-phase SN Ia spectra using four different SN explosion models, and find that within 10 rest-frame days after SN explosion, distortions of SN Ia spectra due to microlensing are typically negligible ($<$1% distortion within the 1$σ$ spread, and $\lesssim$10% distortion within the 2$σ$ spread). This shows great prospects of using lensed SNe Ia to obtain intrinsic early-phase SN spectra for deciphering SN Ia progenitors. As a demonstration of the usefulness of lensed SNe Ia for cosmology, we simulate a sample of mock lensed SN Ia systems that are expected to have accurate and precise time-delay measurements in the era of the Rubin Observatory Legacy Survey of Space and Time (LSST). Adopting realistic yet conservative uncertainties on their time-delay distances and lens angular diameter distances (of 6.6% and 5%, respectively), we find that a sample of 20 lensed SNe Ia would allow a constraint on the Hubble constant ($H_0$) with 1.3% uncertainty in the flat $Λ$CDM cosmology. We find a similar constraint on $H_0$ in an open $Λ$CDM cosmology, while the constraint degrades to $3\%$ in a flat $w$CDM cosmology. We anticipate lensed SNe to be an independent and powerful probe of SN physics and cosmology in the upcoming LSST era.
△ Less
Submitted 11 November, 2020; v1 submitted 19 February, 2020;
originally announced February 2020.
-
COSMOGRAIL XIX: Time delays in 18 strongly lensed quasars from 15 years of optical monitoring
Authors:
M. Millon,
F. Courbin,
V. Bonvin,
E. Paic,
G. Meylan,
M. Tewes,
D. Sluse,
P. Magain,
J. H. H. Chan,
A. Galan,
R. Joseph,
C. Lemon,
O. Tihhonova,
R. I. Anderson,
M. Marmier,
B. Chazelas,
M. Lendl,
A. H. M. J. Triaud,
A. Wyttenbach
Abstract:
We present the results of 15 years of monitoring lensed quasars, which was conducted by the COSMOGRAIL programme at the Leonhard Euler 1.2m Swiss Telescope. The decade-long light curves of 23 lensed systems are presented for the first time. We complement our data set with other monitoring data available in the literature to measure the time delays in 18 systems, among which nine reach a relative p…
▽ More
We present the results of 15 years of monitoring lensed quasars, which was conducted by the COSMOGRAIL programme at the Leonhard Euler 1.2m Swiss Telescope. The decade-long light curves of 23 lensed systems are presented for the first time. We complement our data set with other monitoring data available in the literature to measure the time delays in 18 systems, among which nine reach a relative precision better than 15% for at least one time delay. To achieve this, we developed an automated version of the curve-shifting toolbox PyCS to ensure robust estimation of the time delay in the presence of microlensing, while accounting for the errors due to the imperfect representation of microlensing. We also re-analysed the previously published time delays of RX J1131$-$1231 and HE 0435$-$1223, by adding six and two new seasons of monitoring, respectively, and confirming the previous time-delay measurements. When the time delay measurement is possible, we corrected the light curves of the lensed images from their time delay and present the difference curves to highlight the microlensing signal contained in the data. To date, this is the largest sample of decade-long lens monitoring data, which is useful to measure $H_0$ and the size of quasar accretion discs with microlensing as well as to study quasar variability.
△ Less
Submitted 25 August, 2020; v1 submitted 13 February, 2020;
originally announced February 2020.
-
The STRong lensing Insights into the Dark Energy Survey (STRIDES) 2017/2018 follow-up campaign: Discovery of 10 lensed quasars and 10 quasar pairs
Authors:
C. Lemon,
M. W. Auger,
R. McMahon,
T. Anguita,
Y. Apostolovski,
G. C. -F. Chen,
C. D. Fassnacht,
A. Melo,
V. Motta,
A. Shajib,
T. Treu,
A. Agnello,
E. Buckley-Geer,
P. L. Schechter,
S. Birrer,
T. Collett,
F. Courbin,
C. E. Rusu,
T. M. C. Abbott,
S. Allam,
J. Annis,
S. Avila,
E. Bertin,
D. Brooks,
D. L. Burke
, et al. (43 additional authors not shown)
Abstract:
We report the results of the STRong lensing Insights from the Dark Energy Survey (STRIDES) follow-up campaign of the late 2017/early 2018 season. We obtained spectra of 65 lensed quasar candidates either with EFOSC2 on the NTT or ESI on Keck, which confirm 10 new gravitationally lensed quasars and 10 quasar pairs with similar spectra, but which do not show a lensing galaxy in DES images. Eight len…
▽ More
We report the results of the STRong lensing Insights from the Dark Energy Survey (STRIDES) follow-up campaign of the late 2017/early 2018 season. We obtained spectra of 65 lensed quasar candidates either with EFOSC2 on the NTT or ESI on Keck, which confirm 10 new gravitationally lensed quasars and 10 quasar pairs with similar spectra, but which do not show a lensing galaxy in DES images. Eight lensed quasars are doubly imaged with source redshifts between 0.99 and 2.90, one is triply imaged by a group (DESJ0345-2545, $z=1.68$), and one is quadruply imaged (quad: DESJ0053-2012, $z=3.8$). Singular isothermal ellipsoid models for the doubles, based on high-resolution imaging from SAMI on SOAR or NIRC2 on Keck, give total magnifications between 3.2 and 5.6, and Einstein radii between 0.49 and 1.97 arcseconds. After spectroscopic follow-up, we extract multi-epoch $grizY$ photometry of confirmed lensed quasars and contaminant quasar+star pairs from the first 4 years of DES data using parametric multi-band modelling, and compare variability in each system's components. By measuring the reduced $χ^2$ associated with fitting all epochs to the same magnitude, we find a simple cut on the less variable component that retains all confirmed lensed quasars, while removing 94 per cent of contaminant systems with stellar components. Based on our spectroscopic follow-up, this variability information can improve selection of lensed quasars and quasar pairs from 34-45 per cent to 51-70 per cent, with the majority of remaining contaminants being compact star-forming galaxies. Using mock lensed quasar lightcurves we demonstrate that selection based only on variability will over-represent the quad fraction by 10 per cent over a complete DES magnitude-limited sample (excluding microlensing differences), explained by the magnification bias and hence lower luminosity (more variable) sources in quads.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
TDCOSMO. I. An exploration of systematic uncertainties in the inference of $H_0$ from time-delay cosmography
Authors:
M. Millon,
A. Galan,
F. Courbin,
T. Treu,
S. H. Suyu,
X. Ding,
S. Birrer,
G. C. -F. Chen,
A. J. Shajib,
D. Sluse,
K. C. Wong,
A. Agnello,
M. W. Auger,
E. J. Buckley-Geer,
J. H. H. Chan,
T. Collett,
C. D. Fassnacht,
S. Hilbert,
L. V. E. Koopmans,
V. Motta,
S. Mukherjee,
C. E. Rusu,
A. Sonnenfeld,
C. Spiniello,
L. Van de Vyvere
Abstract:
Time-delay cosmography of lensed quasars has achieved 2.4% precision on the measurement of the Hubble constant, $H_0$. As part of an ongoing effort to uncover and control systematic uncertainties, we investigate three potential sources: 1- stellar kinematics, 2- line-of-sight effects, and 3- the deflector mass model. To meet this goal in a quantitative way, we reproduced the H0LiCOW/SHARP/STRIDES…
▽ More
Time-delay cosmography of lensed quasars has achieved 2.4% precision on the measurement of the Hubble constant, $H_0$. As part of an ongoing effort to uncover and control systematic uncertainties, we investigate three potential sources: 1- stellar kinematics, 2- line-of-sight effects, and 3- the deflector mass model. To meet this goal in a quantitative way, we reproduced the H0LiCOW/SHARP/STRIDES (hereafter TDCOSMO) procedures on a set of real and simulated data, and we find the following. First, stellar kinematics cannot be a dominant source of error or bias since we find that a systematic change of 10% of measured velocity dispersion leads to only a 0.7% shift on $H_0$ from the seven lenses analyzed by TDCOSMO. Second, we find no bias to arise from incorrect estimation of the line-of-sight effects. Third, we show that elliptical composite (stars + dark matter halo), power-law, and cored power-law mass profiles have the flexibility to yield a broad range in $H_0$ values. However, the TDCOSMO procedures that model the data with both composite and power-law mass profiles are informative. If the models agree, as we observe in real systems owing to the "bulge-halo" conspiracy, $H_0$ is recovered precisely and accurately by both models. If the two models disagree, as in the case of some pathological models illustrated here, the TDCOSMO procedure either discriminates between them through the goodness of fit, or it accounts for the discrepancy in the final error bars provided by the analysis. This conclusion is consistent with a reanalysis of six of the TDCOSMO (real) lenses: the composite model yields $74.0^{+1.7}_{-1.8}$ $km.s^{-1}.Mpc^{-1}$, while the power-law model yields $H_0=74.2^{+1.6}_{-1.6}$ $km.s^{-1}.Mpc^{-1}$. In conclusion, we find no evidence of bias or errors larger than the current statistical uncertainties reported by TDCOSMO.
△ Less
Submitted 22 July, 2020; v1 submitted 17 December, 2019;
originally announced December 2019.
-
Exploiting flux ratio anomalies to probe warm dark matter in future large scale surveys
Authors:
David Harvey,
Wessel Valkenburg,
Amelie Tamone,
Alexey Boyarsky,
Frederic Courbin,
Mark Lovell
Abstract:
Flux ratio anomalies in strong gravitationally lensed quasars constitute a unique way to probe the abundance of non-luminous dark matter haloes, and hence the nature of dark matter. In this paper we identify double imaged quasars as a statistically efficient probe of dark matter, since they are 20 times more abundant than quadruply imaged quasars. Using N-body simulations that include realistic ba…
▽ More
Flux ratio anomalies in strong gravitationally lensed quasars constitute a unique way to probe the abundance of non-luminous dark matter haloes, and hence the nature of dark matter. In this paper we identify double imaged quasars as a statistically efficient probe of dark matter, since they are 20 times more abundant than quadruply imaged quasars. Using N-body simulations that include realistic baryonic feedback, we measure the full distribution of flux ratios in doubly imaged quasars for cold (CDM) and warm dark matter (WDM) cosmologies. Through this method, we fold in two key systematics - quasar variability and line-of-sight structures. We find that WDM cosmologies predict a ~6 per cent difference in the cumulative distribution functions of flux ratios relative to CDM, with CDM predicting many more small ratios. Finally, we estimate that ~600 doubly imaged quasars will need to be observed in order to be able to unambiguously discern between CDM and the two WDM models studied here. Such sample sizes will be easily within reach of future large scale surveys such as Euclid. In preparation for this survey data we require discerning the scale of the uncertainties in modelling lens galaxies and their substructure in simulations, plus a strong understanding of the selection function of observed lensed quasars.
△ Less
Submitted 4 December, 2019;
originally announced December 2019.
-
A Microlensing Accretion Disk Size Measurement in the Lensed Quasar WFI 2026-4536
Authors:
Matthew A. Cornachione,
Christopher W. Morgan,
Martin Millon,
Misty C. Bentz,
Frederic Courbin,
Vivien Bonvin,
Emilio E. Falco
Abstract:
We use thirteen seasons of R-band photometry from the 1.2m Leonard Euler Swiss Telescope at La Silla to examine microlensing variability in the quadruply-imaged lensed quasar WFI 2026-4536. The lightcurves exhibit ${\sim}\,0.2\,\text{mag}$ of uncorrelated variability across all epochs and a prominent single feature of ${\sim}\,0.1\,\text{mag}$ within a single season. We analyze this variability to…
▽ More
We use thirteen seasons of R-band photometry from the 1.2m Leonard Euler Swiss Telescope at La Silla to examine microlensing variability in the quadruply-imaged lensed quasar WFI 2026-4536. The lightcurves exhibit ${\sim}\,0.2\,\text{mag}$ of uncorrelated variability across all epochs and a prominent single feature of ${\sim}\,0.1\,\text{mag}$ within a single season. We analyze this variability to constrain the size of the quasar's accretion disk. Adopting a nominal inclination of 60$^\text{o}$, we find an accretion disk scale radius of $\log(r_s/\text{cm}) = 15.74^{+0.34}_{-0.29}$ at a rest-frame wavelength of $2043\,\unicode{xC5}$, and we estimate a black hole mass of $\log(M_{\text{BH}}/M_{\odot}) = 9.18^{+0.39}_{-0.34}$, based on the CIV line in VLT spectra. This size measurement is fully consistent with the Quasar Accretion Disk Size - Black Hole Mass relation, providing another system in which the accretion disk is larger than predicted by thin disk theory.
△ Less
Submitted 2 January, 2020; v1 submitted 14 November, 2019;
originally announced November 2019.
-
ESA Voyage 2050 white paper -- Faint objects in motion: the new frontier of high precision astrometry
Authors:
F. Malbet,
U. Abbas,
J. Alves,
C. Boehm,
W. Brown,
L. Chemin,
A. Correia,
F. Courbin,
J. Darling,
A. Diaferio,
M. Fortin,
M. Fridlund,
O. Gnedin,
B. Holl,
A. Krone-Martins,
A. Léger,
L. Labadie,
J. Laskar,
G. Mamon,
B. McArthur,
D. Michalik,
A. Moitinho,
M. Oertel,
L. Ostorero,
J. Schneider
, et al. (6 additional authors not shown)
Abstract:
Sky survey telescopes and powerful targeted telescopes play complementary roles in astronomy. In order to investigate the nature and characteristics of the motions of very faint objects, a flexibly-pointed instrument capable of high astrometric accuracy is an ideal complement to current astrometric surveys and a unique tool for precision astrophysics. Such a space-based mission will push the front…
▽ More
Sky survey telescopes and powerful targeted telescopes play complementary roles in astronomy. In order to investigate the nature and characteristics of the motions of very faint objects, a flexibly-pointed instrument capable of high astrometric accuracy is an ideal complement to current astrometric surveys and a unique tool for precision astrophysics. Such a space-based mission will push the frontier of precision astrometry from evidence of earth-massed habitable worlds around the nearest starts, and also into distant Milky way objects up to the Local Group of galaxies. As we enter the era of the James Webb Space Telescope and the new ground-based, adaptive-optics-enabled giant telescopes, by obtaining these high precision measurements on key objects that Gaia could not reach, a mission that focuses on high precision astrometry science can consolidate our theoretical understanding of the local universe, enable extrapolation of physical processes to remote redshifts, and derive a much more consistent picture of cosmological evolution and the likely fate of our cosmos. Already several missions have been proposed to address the science case of faint objects in motion using high precision astrometry ESA missions: NEAT for M3, micro-NEAT for S1 mission, and Theia for M4 and M5. Additional new mission configurations adapted with technological innovations could be envisioned to pursue accurate measurements of these extremely small motions. The goal of this white paper is to address the fundamental science questions that are at stake when we focus on the motions of faint sky objects and to briefly review quickly instrumentation and mission profiles.
△ Less
Submitted 12 October, 2019;
originally announced October 2019.
-
STRIDES: a 3.9 per cent measurement of the Hubble constant from the strong lens system DES J0408-5354
Authors:
A. J. Shajib,
S. Birrer,
T. Treu,
A. Agnello,
E. J. Buckley-Geer,
J. H. H. Chan,
L. Christensen,
C. Lemon,
H. Lin,
M. Millon,
J. Poh,
C. E. Rusu,
D. Sluse,
C. Spiniello,
G. C. -F. Chen,
T. Collett,
F. Courbin,
C. D. Fassnacht,
J. Frieman,
A. Galan,
D. Gilman,
A. More,
T. Anguita,
M. W. Auger,
V. Bonvin
, et al. (66 additional authors not shown)
Abstract:
We present a blind time-delay cosmographic analysis for the lens system DES J0408$-$5354. This system is extraordinary for the presence of two sets of multiple images at different redshifts, which provide the opportunity to obtain more information at the cost of increased modelling complexity with respect to previously analyzed systems. We perform detailed modelling of the mass distribution for th…
▽ More
We present a blind time-delay cosmographic analysis for the lens system DES J0408$-$5354. This system is extraordinary for the presence of two sets of multiple images at different redshifts, which provide the opportunity to obtain more information at the cost of increased modelling complexity with respect to previously analyzed systems. We perform detailed modelling of the mass distribution for this lens system using three band Hubble Space Telescope imaging. We combine the measured time delays, line-of-sight central velocity dispersion of the deflector, and statistically constrained external convergence with our lens models to estimate two cosmological distances. We measure the "effective" time-delay distance corresponding to the redshifts of the deflector and the lensed quasar $D_{Δt}^{\rm eff}=3382^{+146}_{-115}$ Mpc and the angular diameter distance to the deflector $D_{\rm d}=1711^{+376}_{-280}$ Mpc, with covariance between the two distances. From these constraints on the cosmological distances, we infer the Hubble constant $H_0 = 74.2^{+2.7}_{-3.0}$ km s$^{-1}$ Mpc$^{-1}$ assuming a flat $Λ$CDM cosmology and a uniform prior for $Ω_{\rm m}$ as $Ω_{\rm m} \sim \mathcal{U}(0.05, 0.5)$. This measurement gives the most precise constraint on $H_0$ to date from a single lens. Our measurement is consistent with that obtained from the previous sample of six lenses analyzed by the $H_0$ Lenses in COSMOGRAIL's Wellspring (H0LiCOW) collaboration. It is also consistent with measurements of $H_0$ based on the local distance ladder, reinforcing the tension with the inference from early Universe probes, for example, with 2.2$σ$ discrepancy from the cosmic microwave background measurement.
△ Less
Submitted 14 April, 2020; v1 submitted 14 October, 2019;
originally announced October 2019.
-
Galaxy Image Simulation Using Progressive GANs
Authors:
Mohamad Dia,
Elodie Savary,
Martin Melchior,
Frederic Courbin
Abstract:
In this work, we provide an efficient and realistic data-driven approach to simulate astronomical images using deep generative models from machine learning. Our solution is based on a variant of the generative adversarial network (GAN) with progressive training methodology and Wasserstein cost function. The proposed solution generates naturalistic images of galaxies that show complex structures an…
▽ More
In this work, we provide an efficient and realistic data-driven approach to simulate astronomical images using deep generative models from machine learning. Our solution is based on a variant of the generative adversarial network (GAN) with progressive training methodology and Wasserstein cost function. The proposed solution generates naturalistic images of galaxies that show complex structures and high diversity, which suggests that data-driven simulations using machine learning can replace many of the expensive model-driven methods used in astronomical data processing.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
-
Twisted quasar light curves: implications for continuum reverberation map** of accretion disks
Authors:
J. H-H. Chan,
M. Millon,
V. Bonvin,
F. Courbin
Abstract:
With the advent of high-cadence and multi-band photometric monitoring facilities, continuum reverberation map** is becoming of increasing importance to measure the physical size of quasar accretion disks. The method is based on the measurement of the time it takes for a signal to propagate from the center to the outer parts of the central engine, assuming the continuum light curve at a given wav…
▽ More
With the advent of high-cadence and multi-band photometric monitoring facilities, continuum reverberation map** is becoming of increasing importance to measure the physical size of quasar accretion disks. The method is based on the measurement of the time it takes for a signal to propagate from the center to the outer parts of the central engine, assuming the continuum light curve at a given wavelength has a time shift of the order of a few days with respect to light curves obtained at shorter wavelengths. We show that with high-quality light curves, this assumption is not valid anymore and that light curves at different wavelengths are not only shifted in time but also distorted: in the context of the lamp-post model and thin-disk geometry, the multi-band light curves are in fact convolved by a transfer function whose size increase with wavelength. We illustrate the effect with simulated light curves in the LSST ugrizy bands and examine the impact on the delay measurements when using three different methods, namely JAVELIN, CREAM, and PyCS. We find that current accretion disk sizes estimated from JAVELIN and PyCS are underestimated by $\sim30\%$ and that unbiased measurement are only obtained with methods that properly take the skewed transfer functions into account, as the CREAM code does. With the LSST-like light curves, we expect to achieve measurement errors below $5\%$ with typical 2-day photometric cadence.
△ Less
Submitted 6 November, 2019; v1 submitted 18 September, 2019;
originally announced September 2019.
-
Cosmic dissonance: new physics or systematics behind a short sound horizon?
Authors:
Nikki Arendse,
Radosław J. Wojtak,
Adriano Agnello,
Geoff C. -F. Chen,
Christopher D. Fassnacht,
Dominique Sluse,
Stefan Hilbert,
Martin Millon,
Vivien Bonvin,
Kenneth C. Wong,
Frédéric Courbin,
Sherry H. Suyu,
Simon Birrer,
Tommaso Treu,
Leon V. E. Koopmans
Abstract:
Persistent tension between low-redshift observations and the Cosmic Microwave Background radiation (CMB), in terms of two fundamental distance scales set by the sound horizon $r_d$ and the Hubble constant $H_0$, suggests new physics beyond the Standard Model or residual systematics. We examine recently updated distance calibrations from Cepheids, gravitational lensing time-delay observations, and…
▽ More
Persistent tension between low-redshift observations and the Cosmic Microwave Background radiation (CMB), in terms of two fundamental distance scales set by the sound horizon $r_d$ and the Hubble constant $H_0$, suggests new physics beyond the Standard Model or residual systematics. We examine recently updated distance calibrations from Cepheids, gravitational lensing time-delay observations, and the Tip of the Red Giant Branch. Calibrating the Baryon Acoustic Oscillations (BAO) and Type Ia supernovae with combinations of the distance indicators, we obtain a joint and self-consistent measurement of $H_0$ and $r_d$ at low redshift, independent of cosmological models and CMB inference. In an attempt to alleviate the tension between late-time and CMB-based measurements, we consider four extensions of the standard $Λ$CDM model. The sound horizon from our different measurements is $r_d=(137\pm3^{stat.}\pm2^{syst.})$~Mpc. Depending on the adopted distance indicators, the $combined$ tension in $H_0$ and $r_d$ ranges between 2.3 and 5.1 $σ$. We find that modifications of $Λ$CDM that change the physics after recombination fail to solve the problem, for the reason that they only resolve the tension in $H_0$, while the tension in $r_d$ remains unchanged. Pre-recombination extensions (with early dark energy or the effective number of neutrinos $\rm{N}_{\rm{eff}}=3.24 \pm 0.16$) are allowed by the data, unless the calibration from Cepheids is included. Results from time-delay lenses are consistent with those from distance-ladder calibrations and point to a discrepancy between absolute distance scales measured from the CMB (assuming the standard cosmological model) and late-time observations. New proposals to resolve this tension should be examined with respect to reconciling not only the Hubble constant but also the sound horizon derived from the CMB and other cosmological probes.
△ Less
Submitted 13 May, 2020; v1 submitted 17 September, 2019;
originally announced September 2019.
-
H0LiCOW XIII. A 2.4% measurement of $H_{0}$ from lensed quasars: $5.3σ$ tension between early and late-Universe probes
Authors:
Kenneth C. Wong,
Sherry H. Suyu,
Geoff C. -F. Chen,
Cristian E. Rusu,
Martin Millon,
Dominique Sluse,
Vivien Bonvin,
Christopher D. Fassnacht,
Stefan Taubenberger,
Matthew W. Auger,
Simon Birrer,
James H. H. Chan,
Frederic Courbin,
Stefan Hilbert,
Olga Tihhonova,
Tommaso Treu,
Adriano Agnello,
Xuheng Ding,
Inh Jee,
Eiichiro Komatsu,
Anowar J. Shajib,
Alessandro Sonnenfeld,
Roger D. Blandford,
Leon V. E. Koopmans,
Philip J. Marshall
, et al. (1 additional authors not shown)
Abstract:
We present a measurement of the Hubble constant ($H_{0}$) and other cosmological parameters from a joint analysis of six gravitationally lensed quasars with measured time delays. All lenses except the first are analyzed blindly with respect to the cosmological parameters. In a flat $Λ$CDM cosmology, we find $H_{0} = 73.3_{-1.8}^{+1.7}$, a 2.4% precision measurement, in agreement with local measure…
▽ More
We present a measurement of the Hubble constant ($H_{0}$) and other cosmological parameters from a joint analysis of six gravitationally lensed quasars with measured time delays. All lenses except the first are analyzed blindly with respect to the cosmological parameters. In a flat $Λ$CDM cosmology, we find $H_{0} = 73.3_{-1.8}^{+1.7}$, a 2.4% precision measurement, in agreement with local measurements of $H_{0}$ from type Ia supernovae calibrated by the distance ladder, but in $3.1σ$ tension with $Planck$ observations of the cosmic microwave background (CMB). This method is completely independent of both the supernovae and CMB analyses. A combination of time-delay cosmography and the distance ladder results is in $5.3σ$ tension with $Planck$ CMB determinations of $H_{0}$ in flat $Λ$CDM. We compute Bayes factors to verify that all lenses give statistically consistent results, showing that we are not underestimating our uncertainties and are able to control our systematics. We explore extensions to flat $Λ$CDM using constraints from time-delay cosmography alone, as well as combinations with other cosmological probes, including CMB observations from $Planck$, baryon acoustic oscillations, and type Ia supernovae. Time-delay cosmography improves the precision of the other probes, demonstrating the strong complementarity. Allowing for spatial curvature does not resolve the tension with $Planck$. Using the distance constraints from time-delay cosmography to anchor the type Ia supernova distance scale, we reduce the sensitivity of our $H_0$ inference to cosmological model assumptions. For six different cosmological models, our combined inference on $H_{0}$ ranges from $\sim73$-$78~\mathrm{km~s^{-1}~Mpc^{-1}}$, which is consistent with the local distance ladder constraints.
△ Less
Submitted 5 November, 2019; v1 submitted 10 July, 2019;
originally announced July 2019.
-
A SHARP view of H0LiCOW: $H_{0}$ from three time-delay gravitational lens systems with adaptive optics imaging
Authors:
Geoff C. -F. Chen,
Christopher D. Fassnacht,
Sherry. H. Suyu,
Cristian E. Rusu,
James H. H. Chan,
Kenneth C. Wong,
Matthew W. Auger,
Stefan Hilbert,
Vivien Bonvin,
Simon Birrer,
Martin Millon,
Leon V. E. Koopmans,
David J. Lagattuta,
John P. McKean,
Simona Vegetti,
Frederic Courbin,
Xuheng Ding,
Aleksi Halkola,
Inh Jee,
Anowar J. Shajib,
Dominique Sluse,
Alessandro Sonnenfeld,
Tommaso Treu
Abstract:
We present the measurement of the Hubble Constant, $H_0$, with three strong gravitational lens systems. We describe a blind analysis of both PG1115+080 and HE0435-1223 as well as an extension of our previous analysis of RXJ1131-1231. For each lens, we combine new adaptive optics (AO) imaging from the Keck Telescope, obtained as part of the SHARP AO effort, with Hubble Space Telescope (HST) imaging…
▽ More
We present the measurement of the Hubble Constant, $H_0$, with three strong gravitational lens systems. We describe a blind analysis of both PG1115+080 and HE0435-1223 as well as an extension of our previous analysis of RXJ1131-1231. For each lens, we combine new adaptive optics (AO) imaging from the Keck Telescope, obtained as part of the SHARP AO effort, with Hubble Space Telescope (HST) imaging, velocity dispersion measurements, and a description of the line-of-sight mass distribution to build an accurate and precise lens mass model. This mass model is then combined with the COSMOGRAIL measured time delays in these systems to determine $H_{0}$. We do both an AO-only and an AO+HST analysis of the systems and find that AO and HST results are consistent. After unblinding, the AO-only analysis gives $H_{0}=82.8^{+9.4}_{-8.3}~\rm km\,s^{-1}\,Mpc^{-1}$ for PG1115+080, $H_{0}=70.1^{+5.3}_{-4.5}~\rm km\,s^{-1}\,Mpc^{-1}$ for HE0435-1223, and $H_{0}=77.0^{+4.0}_{-4.6}~\rm km\,s^{-1}\,Mpc^{-1}$ for RXJ1131-1231. The joint AO-only result for the three lenses is $H_{0}=75.6^{+3.2}_{-3.3}~\rm km\,s^{-1}\,Mpc^{-1}$. The joint result of the AO+HST analysis for the three lenses is $H_{0}=76.8^{+2.6}_{-2.6}~\rm km\,s^{-1}\,Mpc^{-1}$. All of the above results assume a flat $Λ$ cold dark matter cosmology with a uniform prior on $Ω_{\textrm{m}}$ in [0.05, 0.5] and $H_{0}$ in [0, 150] $\rm km\,s^{-1}\,Mpc^{-1}$. This work is a collaboration of the SHARP and H0LiCOW teams, and shows that AO data can be used as the high-resolution imaging component in lens-based measurements of $H_0$. The full time-delay cosmography results from a total of six strongly lensed systems are presented in a companion paper.
△ Less
Submitted 4 July, 2019;
originally announced July 2019.
-
The Hubble Constant determined through an inverse distance ladder including quasar time delays and Type Ia supernovae
Authors:
S. Taubenberger,
S. H. Suyu,
E. Komatsu,
I. Jee,
S. Birrer,
V. Bonvin,
F. Courbin,
C. E. Rusu,
A. J. Shajib,
K. C. Wong
Abstract:
Context. The precise determination of the present-day expansion rate of the Universe, expressed through the Hubble constant $H_0$, is one of the most pressing challenges in modern cosmology. Assuming flat $Λ$CDM, $H_0$ inference at high redshift using cosmic-microwave-background data from Planck disagrees at the 4.4$σ$ level with measurements based on the local distance ladder made up of parallaxe…
▽ More
Context. The precise determination of the present-day expansion rate of the Universe, expressed through the Hubble constant $H_0$, is one of the most pressing challenges in modern cosmology. Assuming flat $Λ$CDM, $H_0$ inference at high redshift using cosmic-microwave-background data from Planck disagrees at the 4.4$σ$ level with measurements based on the local distance ladder made up of parallaxes, Cepheids and Type Ia supernovae (SNe Ia), often referred to as "Hubble tension". Independent, cosmological-model-insensitive ways to infer $H_0$ are of critical importance. Aims. We apply an inverse-distance-ladder approach, combining strong-lensing time-delay-distance measurements with SN Ia data. By themselves, SNe Ia are merely good relative distance indicators, but by anchoring them to strong gravitational lenses one can obtain an $H_0$ measurement that is relatively insensitive to other cosmological parameters. Methods. A cosmological parameter estimate is performed for different cosmological background models, both for strong-lensing data alone and for the combined lensing + SNe Ia data sets. Results. The cosmological-model dependence of strong-lensing $H_0$ measurements is significantly mitigated through the inverse distance ladder. In combination with SN Ia data, the inferred $H_0$ consistently lies around 73-74 km s$^{-1}$ Mpc$^{-1}$, regardless of the assumed cosmological background model. Our results agree nicely with those from the local distance ladder, but there is a >2$σ$ tension with Planck results, and a ~1.5$σ$ discrepancy with results from an inverse distance ladder including Planck, Baryon Acoustic Oscillations and SNe Ia. Future strong-lensing distance measurements will reduce the uncertainties in $H_0$ from our inverse distance ladder.
△ Less
Submitted 31 July, 2019; v1 submitted 29 May, 2019;
originally announced May 2019.
-
H0LiCOW XII. Lens mass model of WFI2033-4723 and blind measurement of its time-delay distance and $H_0$
Authors:
Cristian E. Rusu,
Kenneth C. Wong,
Vivien Bonvin,
Dominique Sluse,
Sherry H. Suyu,
Christopher D. Fassnacht,
James H. H. Chan,
Stefan Hilbert,
Matthew W. Auger,
Alessandro Sonnenfeld,
Simon Birrer,
Frederic Courbin,
Tommaso Treu,
Geoff C. -F. Chen,
Aleksi Halkola,
Leon V. E. Koopmans,
Philip J. Marshall,
Anowar J. Shajib
Abstract:
We present the lens mass model of the quadruply-imaged gravitationally lensed quasar WFI2033-4723, and perform a blind cosmographical analysis based on this system. Our analysis combines (1) time-delay measurements from 14 years of data obtained by the COSmological MOnitoring of GRAvItational Lenses (COSMOGRAIL) collaboration, (2) high-resolution $\textit{Hubble Space Telescope}$ imaging, (3) a me…
▽ More
We present the lens mass model of the quadruply-imaged gravitationally lensed quasar WFI2033-4723, and perform a blind cosmographical analysis based on this system. Our analysis combines (1) time-delay measurements from 14 years of data obtained by the COSmological MOnitoring of GRAvItational Lenses (COSMOGRAIL) collaboration, (2) high-resolution $\textit{Hubble Space Telescope}$ imaging, (3) a measurement of the velocity dispersion of the lens galaxy based on ESO-MUSE data, and (4) multi-band, wide-field imaging and spectroscopy characterizing the lens environment. We account for all known sources of systematics, including the influence of nearby perturbers and complex line-of-sight structure, as well as the parametrization of the light and mass profiles of the lensing galaxy. After unblinding, we determine the effective time-delay distance to be $4784_{-248}^{+399}~\mathrm{Mpc}$, an average precision of $6.6\%$. This translates to a Hubble constant $H_{0} = 71.6_{-4.9}^{+3.8}~\mathrm{km~s^{-1}~Mpc^{-1}}$, assuming a flat $Λ$CDM cosmology with a uniform prior on $Ω_\mathrm{m}$ in the range [0.05, 0.5]. This work is part of the $H_0$ Lenses in COSMOGRAIL's Wellspring (H0LiCOW) collaboration, and the full time-delay cosmography results from a total of six strongly lensed systems are presented in a companion paper (H0LiCOW XIII).
△ Less
Submitted 8 December, 2019; v1 submitted 22 May, 2019;
originally announced May 2019.
-
H0LiCOW X: Spectroscopic/imaging survey and galaxy-group identification around the strong gravitational lens system WFI2033-4723
Authors:
D. Sluse,
C. E. Rusu,
C. D. Fassnacht,
A. Sonnenfeld,
J. Richard,
M. W. Auger,
L. Coccato,
K. C. Wong,
S. H. Suyu,
T. Treu,
A. Agnello,
S. Birrer,
V. Bonvin,
T. Collett,
F. Courbin,
S. Hilbert,
L. V. E. Koopmans,
O. Tihhanova,
P. J. Marshall,
G. Meylan,
A. J. Shajib,
J. Annis,
S. Avila,
E. Bertin,
D. Brooks
, et al. (43 additional authors not shown)
Abstract:
Galaxies and galaxy groups located along the line of sight towards gravitationally lensed quasars produce high-order perturbations of the gravitational potential at the lens position. When these perturbation are too large, they can induce a systematic error on $H_0$ of a few-percent if the lens system is used for cosmological inference and the perturbers are not explicitly accounted for in the len…
▽ More
Galaxies and galaxy groups located along the line of sight towards gravitationally lensed quasars produce high-order perturbations of the gravitational potential at the lens position. When these perturbation are too large, they can induce a systematic error on $H_0$ of a few-percent if the lens system is used for cosmological inference and the perturbers are not explicitly accounted for in the lens model. In this work, we present a detailed characterization of the environment of the lens system WFI2033-4723 ($z_{\rm src} = 1.662$, $z_{\rm lens}$ = 0.6575), one of the core targets of the H0LICOW project for which we present cosmological inferences in a companion paper (Rusu et al. 2019). We use the Gemini and ESO-Very Large telescopes to measure the spectroscopic redshifts of the brightest galaxies towards the lens, and use the ESO-MUSE integral field spectrograph to measure the velocity-dispersion of the lens ($σ_{\rm {los}}= 250^{+15}_{-21}$ km/s) and of several nearby galaxies. In addition, we measure photometric redshifts and stellar masses of all galaxies down to $i < 23$ mag, mainly based on Dark Energy Survey imaging (DR1). Our new catalog, complemented with literature data, more than doubles the number of known galaxy spectroscopic redshifts in the direct vicinity of the lens, expanding to 116 (64) the number of spectroscopic redshifts for galaxies separated by less than 3 arcmin (2 arcmin) from the lens. Using the flexion-shift as a measure of the amplitude of the gravitational perturbation, we identify 2 galaxy groups and 3 galaxies that require specific attention in the lens models. The ESO MUSE data enable us to measure the velocity-dispersions of three of these galaxies. These results are essential for the cosmological inference analysis presented in Rusu et al. (2019).
△ Less
Submitted 6 September, 2019; v1 submitted 21 May, 2019;
originally announced May 2019.
-
COSMOGRAIL XVIII: time delays of the quadruply lensed quasar WFI2033-4723
Authors:
V. Bonvin,
M. Millon,
J. H. H. Chan,
F. Courbin,
C. E. Rusu,
D. Sluse,
S. H. Suyu,
K. C. Wong,
C. D. Fassnacht,
P. J. Marshall,
T. Treu,
E. Buckley-Geer,
J. Frieman,
A. Hempel,
S. Kim,
R. Lachaume,
M. Rabus,
D. C. -Y. Chao,
M. Chijani,
D. Gilman,
K. Gilmore,
K. Rojas,
P. Williams,
T. Anguita,
C. S. Kochanek
, et al. (4 additional authors not shown)
Abstract:
We present new measurements of the time delays of WFI2033-4723. The data sets used in this work include 14 years of data taken at the 1.2m Leonhard Euler Swiss telescope, 13 years of data from the SMARTS 1.3m telescope at Las Campanas Observatory and a single year of high-cadence and high-precision monitoring at the MPIA 2.2m telescope. The time delays measured from these different data sets, all…
▽ More
We present new measurements of the time delays of WFI2033-4723. The data sets used in this work include 14 years of data taken at the 1.2m Leonhard Euler Swiss telescope, 13 years of data from the SMARTS 1.3m telescope at Las Campanas Observatory and a single year of high-cadence and high-precision monitoring at the MPIA 2.2m telescope. The time delays measured from these different data sets, all taken in the R-band, are in good agreement with each other and with previous measurements from the literature. Combining all the time-delay estimates from our data sets results in Dt_AB = 36.2-0.8+0.7 days (2.1% precision), Dt_AC = -23.3-1.4+1.2 days (5.6%) and Dt_BC = -59.4-1.3+1.3 days (2.2%). In addition, the close image pair A1-A2 of the lensed quasars can be resolved in the MPIA 2.2m data. We measure a time delay consistent with zero in this pair of images. We also explore the prior distributions of microlensing time-delay potentially affecting the cosmological time-delay measurements of WFI2033-4723. There is however no strong indication in our measurements that microlensing time delay is neither present nor absent. This work is part of a H0LiCOW series focusing on measuring the Hubble constant from WFI2033-4723.
△ Less
Submitted 20 May, 2019;
originally announced May 2019.
-
4MOST: Project overview and information for the First Call for Proposals
Authors:
R. S. de Jong,
O. Agertz,
A. Agudo Berbel,
J. Aird,
D. A. Alexander,
A. Amarsi,
F. Anders,
R. Andrae,
B. Ansarinejad,
W. Ansorge,
P. Antilogus,
H. Anwand-Heerwart,
A. Arentsen,
A. Arnadottir,
M. Asplund,
M. Auger,
N. Azais,
D. Baade,
G. Baker,
S. Baker,
E. Balbinot,
I. K. Baldry,
M. Banerji,
S. Barden,
P. Barklem
, et al. (313 additional authors not shown)
Abstract:
We introduce the 4-metre Multi-Object Spectroscopic Telescope (4MOST), a new high-multiplex, wide-field spectroscopic survey facility under development for the four-metre-class Visible and Infrared Survey Telescope for Astronomy (VISTA) at Paranal. Its key specifications are: a large field of view (FoV) of 4.2 square degrees and a high multiplex capability, with 1624 fibres feeding two low-resolut…
▽ More
We introduce the 4-metre Multi-Object Spectroscopic Telescope (4MOST), a new high-multiplex, wide-field spectroscopic survey facility under development for the four-metre-class Visible and Infrared Survey Telescope for Astronomy (VISTA) at Paranal. Its key specifications are: a large field of view (FoV) of 4.2 square degrees and a high multiplex capability, with 1624 fibres feeding two low-resolution spectrographs ($R = λ/Δλ\sim 6500$), and 812 fibres transferring light to the high-resolution spectrograph ($R \sim 20\,000$). After a description of the instrument and its expected performance, a short overview is given of its operational scheme and planned 4MOST Consortium science; these aspects are covered in more detail in other articles in this edition of The Messenger. Finally, the processes, schedules, and policies concerning the selection of ESO Community Surveys are presented, commencing with a singular opportunity to submit Letters of Intent for Public Surveys during the first five years of 4MOST operations.
△ Less
Submitted 1 April, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Strongly lensed SNe Ia in the era of LSST: observing cadence for lens discoveries and time-delay measurements
Authors:
S. Huber,
S. H. Suyu,
U. M. Noebauer,
V. Bonvin,
D. Rothchild,
J. H. H. Chan,
H. Awan,
F. Courbin,
M. Kromer,
P. Marshall,
M. Oguri,
T. Ribeiro,
The LSST Dark Energy Science Collaboration
Abstract:
The upcoming Large Synoptic Survey Telescope (LSST) will detect many strongly lensed Type Ia supernovae (LSNe Ia) for time-delay cosmography. This will provide an independent and direct way for measuring the Hubble constant $H_0$, which is necessary to address the current $4.4 σ$ tension in $H_0$ between the local distance ladder and the early Universe measurements. We present a detailed analysis…
▽ More
The upcoming Large Synoptic Survey Telescope (LSST) will detect many strongly lensed Type Ia supernovae (LSNe Ia) for time-delay cosmography. This will provide an independent and direct way for measuring the Hubble constant $H_0$, which is necessary to address the current $4.4 σ$ tension in $H_0$ between the local distance ladder and the early Universe measurements. We present a detailed analysis of different observing strategies for the LSST, and quantify their impact on time-delay measurement between multiple images of LSNe Ia. For this, we produced microlensed mock-LSST light curves for which we estimated the time delay between different images. We find that using only LSST data for time-delay cosmography is not ideal. Instead, we advocate using LSST as a discovery machine for LSNe Ia, enabling time delay measurements from follow-up observations from other instruments in order to increase the number of systems by a factor of 2 to 16 depending on the observing strategy. Furthermore, we find that LSST observing strategies, which provide a good sampling frequency (the mean inter-night gap is around two days) and high cumulative season length (ten seasons with a season length of around 170 days per season), are favored. Rolling cadences subdivide the survey and focus on different parts in different years; these observing strategies trade the number of seasons for better sampling frequency. In our investigation, this leads to half the number of systems in comparison to the best observing strategy. Therefore rolling cadences are disfavored because the gain from the increased sampling frequency cannot compensate for the shortened cumulative season length. We anticipate that the sample of lensed SNe Ia from our preferred LSST cadence strategies with rapid follow-up observations would yield an independent percent-level constraint on $H_0$.
△ Less
Submitted 11 October, 2019; v1 submitted 27 February, 2019;
originally announced March 2019.
-
Accretion Disk Size Measurement and Time Delays in the Lensed Quasar WFI 2033-4723
Authors:
Christopher W. Morgan,
Gregory E. Hyer,
Vivien Bonvin,
Ana M. Mosquera,
Matthew Cornachione,
Frederic Courbin,
Christopher S. Kochanek,
Emilio E. Falco
Abstract:
We present 13 seasons of $R$-band photometry of the quadruply-lensed quasar WFI 2033-4723 from the 1.3m SMARTS telescope at CTIO and the 1.2m Euler Swiss Telescope at La Silla, in which we detect microlensing variability of $\sim0.2$ mags on a timescale of $\sim$6 years. Using a Bayesian Monte Carlo technique, we analyze the microlensing signal to obtain a measurement of the size of this system's…
▽ More
We present 13 seasons of $R$-band photometry of the quadruply-lensed quasar WFI 2033-4723 from the 1.3m SMARTS telescope at CTIO and the 1.2m Euler Swiss Telescope at La Silla, in which we detect microlensing variability of $\sim0.2$ mags on a timescale of $\sim$6 years. Using a Bayesian Monte Carlo technique, we analyze the microlensing signal to obtain a measurement of the size of this system's accretion disk of $\log (r_s/{\rm cm}) = 15.86^{+0.25}_{-0.27}$ at $λ_{rest} = 2481{\rm Å}$, assuming a $60^\circ$ inclination angle. We confirm previous measurements of the BC and AB time delays, and we obtain a tentative measurement of the delay between the closely spaced A1 and A2 images of $Δt_{A1A2} = t_{A1} - t_{A2} = -3.9^{+3.4}_{-2.2}$ days. We conclude with an update to the Quasar Accretion Disk Size - Black Hole Mass Relation, in which we confirm that the accretion disk size predictions from simple thin disk theory are too small.
△ Less
Submitted 13 December, 2018;
originally announced December 2018.
-
Sparse Lens Inversion Technique (SLIT): lens and source separability from linear inversion of the source reconstruction problem
Authors:
R. Joseph,
F. Courbin,
J. -L. Starck,
S. Birrer
Abstract:
Strong gravitational lensing offers a wealth of astrophysical information on the background source it affects, provided the lensed source can be reconstructed as if it was seen in the absence of lensing. In the present work, we illustrate how sparse optimisation can address the problem. As a first step towards a full free-form lens modelling technique, we consider linear inversion of the lensed so…
▽ More
Strong gravitational lensing offers a wealth of astrophysical information on the background source it affects, provided the lensed source can be reconstructed as if it was seen in the absence of lensing. In the present work, we illustrate how sparse optimisation can address the problem. As a first step towards a full free-form lens modelling technique, we consider linear inversion of the lensed source under sparse regularisation and joint deblending from the lens light profile. The method is based on morphological component analysis, assuming a known mass model. We show with numerical experiments that representing the lens and source light using an undecimated wavelet basis allows us to reconstruct the source and to separate it from the foreground lens at the same time. Both the source and lens light have a non-analytic form, allowing for the flexibility needed in the inversion to represent arbitrarily small and complex luminous structures in the lens and source. in addition, sparse regularisation avoids over-fitting the data and does not require the use of any adaptive mesh or pixel grid. As a consequence, our reconstructed sources can be represented on a grid of very small pixels. Sparse regularisation in the wavelet domain also allows for automated computation of the regularisation parameter, thus minimising the impact of arbitrary choice of initial parameters. Our inversion technique for a fixed mass distribution can be incorporated in future lens modelling technique iterating over the lens mass parameters. The python package corresponding to the algorithms described in this article can be downloaded via the github platform at https://github.com/herjy/SLIT.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.
-
H0LiCOW - IX. Cosmographic analysis of the doubly imaged quasar SDSS 1206+4332 and a new measurement of the Hubble constant
Authors:
S. Birrer,
T. Treu,
C. E. Rusu,
V. Bonvin,
C. D. Fassnacht,
J. H. H. Chan,
A. Agnello,
A. J. Shajib,
G. C. -F. Chen,
M. Auger,
F. Courbin,
S. Hilbert,
D. Sluse,
S. H. Suyu,
K. C. Wong,
P. Marshall,
B. C. Lemaux,
G. Meylan
Abstract:
We present a blind time-delay strong lensing (TDSL) cosmographic analysis of the doubly imaged quasar SDSS 1206+4332. We combine the relative time delay between the quasar images, Hubble Space Telescope imaging, the Keck stellar velocity dispersion of the lensing galaxy, and wide-field photometric and spectroscopic data of the field to constrain two angular diameter distance relations. The combine…
▽ More
We present a blind time-delay strong lensing (TDSL) cosmographic analysis of the doubly imaged quasar SDSS 1206+4332. We combine the relative time delay between the quasar images, Hubble Space Telescope imaging, the Keck stellar velocity dispersion of the lensing galaxy, and wide-field photometric and spectroscopic data of the field to constrain two angular diameter distance relations. The combined analysis is performed by forward modelling the individual data sets through a Bayesian hierarchical framework, and it is kept blind until the very end to prevent experimenter bias. After unblinding, the inferred distances imply a Hubble constant $H_0 = 68.8^{+5.4}_{-5.1}$ kms$^{-1}$Mpc$^{-1}$, assuming a flat Lambda cold dark matter cosmology with uniform prior on $Ω_{\rm m}$ in [0.05, 0.5]. The precision of our cosmographic measurement with the doubly imaged quasar SDSS 1206+4332 is comparable with those of quadruply imaged quasars and opens the path to perform on selected doubles the same analysis as anticipated for quads. Our analysis is based on a completely independent lensing code than our previous three H0LiCOW systems and the new measurement is fully consistent with those. We provide the analysis scripts paired with the publicly available software to facilitate independent analysis. The consistency between blind measurements with independent codes provides an important sanity check on lens modelling systematics. By combining the likelihoods of the four systems under the same prior, we obtain $H_0 = 72.5^{+2.1}_{-2.3}$kms$^{-1}$Mpc$^{-1}$. This measurement is independent of the distance ladder and other cosmological probes.
△ Less
Submitted 24 May, 2019; v1 submitted 4 September, 2018;
originally announced September 2018.
-
Dissecting cold gas in a high-redshift galaxy using a lensed background quasar
Authors:
J. -K. Krogager,
P. Noterdaeme,
J. M. O'Meara,
M. Fumagalli,
J. P. U. Fynbo,
J. X. Prochaska,
J. Hennawi,
S. Balashev,
F. Courbin,
M. Rafelski,
A. Smette,
P. Boissé
Abstract:
We present a study of cold gas absorption from a damped Lyman-$α$ absorber (DLA) at redshift $z_{\rm abs}=1.946$ towards two lensed images of the quasar J144254.78+405535.5 at redshift $z_{\rm QSO} = 2.590$. The physical separation of the two lines of sight at the absorber redshift is $d_{\rm abs}=0.7$~kpc based on our lens model. We observe absorption lines from neutral carbon and H$_2$ along bot…
▽ More
We present a study of cold gas absorption from a damped Lyman-$α$ absorber (DLA) at redshift $z_{\rm abs}=1.946$ towards two lensed images of the quasar J144254.78+405535.5 at redshift $z_{\rm QSO} = 2.590$. The physical separation of the two lines of sight at the absorber redshift is $d_{\rm abs}=0.7$~kpc based on our lens model. We observe absorption lines from neutral carbon and H$_2$ along both lines of sight indicating that cold gas is present on scales larger than $d_{\rm abs}$. We measure column densities of HI to be $\log N(\rm H\,ı) = 20.27\pm0.02$ and $20.34\pm0.05$ and of H$_2$ to be $\log N(\rm H_2) = 19.7\pm0.1$ and $19.9\pm0.2$. The metallicity inferred from sulphur is consistent with Solar metallicity for both sightlines: $[{\rm S/H}]_A = 0.0\pm0.1$ and $[{\rm S/H}]_B = -0.1\pm0.1$. Based on the excitation of low rotational levels of H$_2$, we constrain the temperature of the cold gas phase to be $T=109\pm20$ and $T=89\pm25$ K for the two lines of sight. From the relative excitation of fine-structure levels of CI, we constrain the hydrogen volumetric densities in the range of $40-110$ cm$^{-3}$. Based on the ratio of observed column density and volumetric density, we infer the average individual `cloud' size along the line of sight to be $l\approx0.1$ pc. Using the transverse line-of-sight separation of 0.7 kpc together with the individual cloud size, we are able to put an upper limit to the volume filling factor of cold gas of $f_{\rm vol} < 0.2$ %. Nonetheless, the projected covering fraction of cold gas must be large (close to unity) over scales of a few kpc in order to explain the presence of cold gas in both lines of sight. Compared to the typical extent of DLAs (~10-30 kpc), this is consistent with the relative incidence rate of CI absorbers and DLAs.
△ Less
Submitted 4 September, 2018;
originally announced September 2018.
-
The STRong lensing Insights into the Dark Energy Survey (STRIDES) 2016 follow-up campaign. I. Overview and classification of candidates selected by two techniques
Authors:
T. Treu,
A. Agnello,
M. A. Baumer,
S. Birrer,
E. J. Buckley-Geer,
F. Courbin,
Y. J. Kim,
H. Lim,
P. J. Marshall,
B. Nord,
P. L. Schechter,
P. R. Sivakumar,
L. E. Abramson,
T. Anguita,
Y. Apostolovski,
M. W. Auger,
J. H. H. Chan,
G. C. F. Chen,
T. E. Collett,
C. D. Fassnacht,
J. -W. Hsueh,
C. Lemon,
R. G. McMahon,
V. Motta,
F. Ostrovski
, et al. (57 additional authors not shown)
Abstract:
The primary goals of the STRong lensing Insights into the Dark Energy Survey (STRIDES) collaboration are to measure the dark energy equation of state parameter and the free streaming length of dark matter. To this aim, STRIDES is discovering strongly lensed quasars in the imaging data of the Dark Energy Survey and following them up to measure time delays, high resolution imaging, and spectroscopy…
▽ More
The primary goals of the STRong lensing Insights into the Dark Energy Survey (STRIDES) collaboration are to measure the dark energy equation of state parameter and the free streaming length of dark matter. To this aim, STRIDES is discovering strongly lensed quasars in the imaging data of the Dark Energy Survey and following them up to measure time delays, high resolution imaging, and spectroscopy sufficient to construct accurate lens models. In this paper, we first present forecasts for STRIDES. Then, we describe the STRIDES classification scheme, and give an overview of the Fall 2016 follow-up campaign. We continue by detailing the results of two selection methods, the Outlier Selection Technique and a morphological algorithm, and presenting lens models of a system, which could possibly be a lensed quasar in an unusual configuration. We conclude with the summary statistics of the Fall 2016 campaign. Including searches presented in companion papers (Anguita et al.; Ostrovski et al.), STRIDES followed up 117 targets identifying 7 new strongly lensed systems, and 7 nearly identical quasars (NIQs), which could be confirmed as lenses by the detection of the lens galaxy. 76 candidates were rejected and 27 remain otherwise inconclusive, for a success rate in the range 6-35\%. This rate is comparable to that of previous searches like SQLS even though the parent dataset of STRIDES is purely photometric and our selection of candidates cannot rely on spectroscopic information.
△ Less
Submitted 5 September, 2018; v1 submitted 14 August, 2018;
originally announced August 2018.
-
Is every strong lens model unhappy in its own way? Uniform modelling of a sample of 13 quadruply+ imaged quasars
Authors:
A. J. Shajib,
S. Birrer,
T. Treu,
M. W. Auger,
A. Agnello,
T. Anguita,
E. J. Buckley-Geer,
J. H. H. Chan,
T. E. Collett,
F. Courbin,
C. D. Fassnacht,
J. Frieman,
I. Kayo,
C. Lemon,
H. Lin,
P. J. Marshall,
R. McMahon,
A. More,
N. D. Morgan,
V. Motta,
M. Oguri,
F. Ostrovski,
C. E. Rusu,
P. L. Schechter,
T. Shanks
, et al. (48 additional authors not shown)
Abstract:
Strong-gravitational lens systems with quadruply-imaged quasars (quads) are unique probes to address several fundamental problems in cosmology and astrophysics. Although they are intrinsically very rare, ongoing and planned wide-field deep-sky surveys are set to discover thousands of such systems in the next decade. It is thus paramount to devise a general framework to model strong-lens systems to…
▽ More
Strong-gravitational lens systems with quadruply-imaged quasars (quads) are unique probes to address several fundamental problems in cosmology and astrophysics. Although they are intrinsically very rare, ongoing and planned wide-field deep-sky surveys are set to discover thousands of such systems in the next decade. It is thus paramount to devise a general framework to model strong-lens systems to cope with this large influx without being limited by expert investigator time. We propose such a general modelling framework (implemented with the publicly available software Lenstronomy) and apply it to uniformly model three-band Hubble Space Telescope Wide Field Camera 3 images of 13 quads. This is the largest uniformly modelled sample of quads to date and paves the way for a variety of studies. To illustrate the scientific content of the sample, we investigate the alignment between the mass and light distribution in the deflectors. The position angles of these distributions are well-aligned, except when there is strong external shear. However, we find no correlation between the ellipticity of the light and mass distributions. We also show that the observed flux-ratios between the images depart significantly from the predictions of simple smooth models. The departures are strongest in the bluest band, consistent with microlensing being the dominant cause in addition to millilensing. Future papers will exploit this rich dataset in combination with ground based spectroscopy and time delays to determine quantities such as the Hubble constant, the free streaming length of dark matter, and the normalization of the initial stellar mass function.
△ Less
Submitted 3 September, 2020; v1 submitted 24 July, 2018;
originally announced July 2018.
-
Weak-lensing shear measurement with machine learning: teaching artificial neural networks about feature noise
Authors:
Malte Tewes,
Thibault Kuntzer,
Reiko Nakajima,
Frédéric Courbin,
Hendrik Hildebrandt,
Tim Schrabback
Abstract:
Cosmic shear is a primary cosmological probe for several present and upcoming surveys investigating dark matter and dark energy, such as Euclid or WFIRST. The probe requires an extremely accurate measurement of the shapes of millions of galaxies based on imaging data. Crucially, the shear measurement must address and compensate for a range of interwoven nuisance effects related to the instrument o…
▽ More
Cosmic shear is a primary cosmological probe for several present and upcoming surveys investigating dark matter and dark energy, such as Euclid or WFIRST. The probe requires an extremely accurate measurement of the shapes of millions of galaxies based on imaging data. Crucially, the shear measurement must address and compensate for a range of interwoven nuisance effects related to the instrument optics and detector, noise, unknown galaxy morphologies, colors, blending of sources, and selection effects. This paper explores the use of supervised machine learning (ML) as a tool to solve this inverse problem. We present a simple architecture that learns to regress shear point estimates and weights via shallow artificial neural networks. The networks are trained on simulations of the forward observing process, and take combinations of moments of the galaxy images as inputs. A challenging peculiarity of this ML application is the combination of the noisiness of the input features and the requirements on the accuracy of the inverse regression. To address this issue, the proposed training algorithm minimizes bias over multiple realizations of individual source galaxies, reducing the sensitivity to properties of the overall sample of source galaxies. Importantly, an observational selection function of these source galaxies can be straightforwardly taken into account via the weights. We first introduce key aspects of our approach using toy-model simulations, and then demonstrate its potential on images mimicking Euclid data. Finally, we analyze images from the GREAT3 challenge, obtaining competitively low shear biases despite the use of a simple training set. We conclude that the further development of ML approaches is of high interest to meet the stringent requirements on the shear measurement in current and future surveys. A demonstration implementation of our technique is publicly available.
△ Less
Submitted 30 January, 2019; v1 submitted 5 July, 2018;
originally announced July 2018.
-
Impact of the 3D source geometry on time-delay measurements of lensed type-Ia Supernovae
Authors:
V. Bonvin,
O. Tihhonova,
M. Millon,
J. H. H. Chan,
E. Savary,
S. Huber,
F. Courbin
Abstract:
It has recently been proposed that gravitationally lensed type-Ia supernovae can provide microlensing-free time-delay measurements provided that the measurement is taken during the achromatic expansion phase of the explosion and that color light curves are used rather than single-band light curves. If verified, this would provide both precise and accurate time-delay measurements, making lensed typ…
▽ More
It has recently been proposed that gravitationally lensed type-Ia supernovae can provide microlensing-free time-delay measurements provided that the measurement is taken during the achromatic expansion phase of the explosion and that color light curves are used rather than single-band light curves. If verified, this would provide both precise and accurate time-delay measurements, making lensed type-Ia supernovae a new golden standard for time-delay cosmography. However, the 3D geometry of the expanding shell can introduce an additional bias that has not yet been fully explored. In this work, we present and discuss the impact of this effect on time-delay cosmography with lensed supernovae and find that on average it leads to a bias of a few tenths of a day for individual lensed systems. This is negligible in view of the cosmological time delays predicted for typical lensed type-Ia supernovae but not for the specific case of the recently discovered type-Ia supernova iPTF16geu, whose time delays are expected to be smaller than a day.
△ Less
Submitted 26 February, 2019; v1 submitted 11 May, 2018;
originally announced May 2018.
-
Constraining the microlensing effect on time delays with new time-delay prediction model in $H_{0}$ measurements
Authors:
Geoff C. -F. Chen,
James H. H. Chan,
Vivien Bonvin,
Christopher D. Fassnacht,
Karina Rojas,
Martin Millon,
Fred Courbin,
Sherry H. Suyu,
Kenneth C. Wong,
Dominique Sluse,
Tommaso Treu,
Anowar J. Shajib,
Jen-Wei Hsueh,
David J. Lagattuta,
Leon V. E. Koopmans,
Simona Vegetti,
John P. McKean
Abstract:
Time-delay strong lensing provides a unique way to directly measure the Hubble constant ($H_{0}$). The precision of the $H_{0}$ measurement depends on the uncertainties in the time-delay measurements, the mass distribution of the main deflector(s), and the mass distribution along the line of sight. Tie and Kochanek (2018) have proposed a new microlensing effect on time delays based on differential…
▽ More
Time-delay strong lensing provides a unique way to directly measure the Hubble constant ($H_{0}$). The precision of the $H_{0}$ measurement depends on the uncertainties in the time-delay measurements, the mass distribution of the main deflector(s), and the mass distribution along the line of sight. Tie and Kochanek (2018) have proposed a new microlensing effect on time delays based on differential magnification of the coherent accretion disc variability of the lensed quasar. If real, this effect could significantly broaden the uncertainty on the time delay measurements by up to $30\%$ for lens systems such as PG1115+080, which have relatively short time delays and monitoring over several different epochs. In this paper we develop a new technique that uses the time-delay ratios and simulated microlensing maps within a Bayesian framework in order to limit the allowed combinations of microlensing delays and thus to lessen the uncertainties due to the proposed effect. We show that, under the assumption of Tie and Kochanek (2018), the uncertainty on the time-delay distance ($D_{Δt}$, which is proportional to 1/$H_{0}$) of short time-delay ($\sim18$ days) lens, PG1115+080, increases from $\sim7\%$ to $\sim10\%$ by simultaneously fitting the three time-delay measurements from the three different datasets across twenty years, while in the case of long time-delay ($\sim90$ days) lens, the microlensing effect on time delays is negligible as the uncertainty on $D_{Δt}$ of RXJ1131-1231 only increases from $\sim2.5\%$ to $\sim2.6\%$.
△ Less
Submitted 28 August, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.
-
COSMOGRAIL XVII: Time delays for the quadruply imaged quasar PG 1115+080
Authors:
V. Bonvin,
J. H. H. Chan,
M. Millon,
K. Rojas,
F. Courbin,
G. C. -F. Chen,
C. D. Fassnacht,
E. Paic,
M. Tewes,
D. C. -Y. Chao,
M. Chijani,
D. Gilman,
K. Gilmore,
P. Williams,
E. Buckley-Geer,
J. Frieman,
P. J. Marshall,
S. H. Suyu,
T. Treu,
A. Hempel,
S. Kim,
R. Lachaume,
M. Rabus,
T. Anguita,
G. Meylan
, et al. (2 additional authors not shown)
Abstract:
We present time-delay estimates for the quadruply imaged quasar PG 1115+080. Our resuls are based on almost daily observations for seven months at the ESO MPIA 2.2m telescope at La Silla Observatory, reaching a signal-to-noise ratio of about 1000 per quasar image. In addition, we re-analyse existing light curves from the literature that we complete with an additional three seasons of monitoring wi…
▽ More
We present time-delay estimates for the quadruply imaged quasar PG 1115+080. Our resuls are based on almost daily observations for seven months at the ESO MPIA 2.2m telescope at La Silla Observatory, reaching a signal-to-noise ratio of about 1000 per quasar image. In addition, we re-analyse existing light curves from the literature that we complete with an additional three seasons of monitoring with the Mercator telescope at La Palma Observatory. When exploring the possible source of bias we consider the so-called microlensing time delay, a potential source of systematic error so far never directly accounted for in previous time-delay publications. In fifteen years of data on PG 1115+080, we find no strong evidence of microlensing time delay. Therefore not accounting for this effect, our time-delay estimates on the individual data sets are in good agreement with each other and with the literature. Combining the data sets, we obtain the most precise time-delay estimates to date on PG 1115+080, with Dt(AB) = 8.3+1.5-1.6 days (18.7% precision), Dt(AC) = 9.9+1.1-1.1 days (11.1%) and Dt(BC) = 18.8+1.6-1.6 days (8.5%). Turning these time delays into cosmological constraints is done in a companion paper that makes use of ground-based Adaptive Optics (AO) with the Keck telescope.
△ Less
Submitted 24 April, 2018;
originally announced April 2018.
-
The Strong Gravitational Lens Finding Challenge
Authors:
R. Benton Metcalf,
M. Meneghetti,
Camille Avestruz,
Fabio Bellagamba,
Clécio R. Bom,
Emmanuel Bertin,
Rémi Cabanac,
F. Courbin,
Andrew Davies,
Etienne Decencière,
Rémi Flamary,
Raphael Gavazzi,
Mario Geiger,
Philippa Hartley,
Marc Huertas-Company,
Neal Jackson,
Eric Jullo,
Jean-Paul Kneib,
Léon V. E. Koopmans,
François Lanusse,
Chun-Liang Li,
Quanbin Ma,
Martin Makler,
Nan Li,
Matthew Lightman
, et al. (11 additional authors not shown)
Abstract:
Large scale imaging surveys will increase the number of galaxy-scale strong lensing candidates by maybe three orders of magnitudes beyond the number known today. Finding these rare objects will require picking them out of at least tens of millions of images and deriving scientific results from them will require quantifying the efficiency and bias of any search method. To achieve these objectives a…
▽ More
Large scale imaging surveys will increase the number of galaxy-scale strong lensing candidates by maybe three orders of magnitudes beyond the number known today. Finding these rare objects will require picking them out of at least tens of millions of images and deriving scientific results from them will require quantifying the efficiency and bias of any search method. To achieve these objectives automated methods must be developed. Because gravitational lenses are rare objects reducing false positives will be particularly important. We present a description and results of an open gravitational lens finding challenge. Participants were asked to classify 100,000 candidate objects as to whether they were gravitational lenses or not with the goal of develo** better automated methods for finding lenses in large data sets. A variety of methods were used including visual inspection, arc and ring finders, support vector machines (SVM) and convolutional neural networks (CNN). We find that many of the methods will be easily fast enough to analyse the anticipated data flow. In test data, several methods are able to identify upwards of half the lenses after applying some thresholds on the lens characteristics such as lensed image brightness, size or contrast with the lens galaxy without making a single false-positive identification. This is significantly better than direct inspection by humans was able to do. (abridged)
△ Less
Submitted 20 March, 2019; v1 submitted 10 February, 2018;
originally announced February 2018.
-
Cosmological distance indicators
Authors:
Sherry H. Suyu,
Tzu-Ching Chang,
Frédéric Courbin,
Teppei Okumura
Abstract:
We review three distance measurement techniques beyond the local universe: (1) gravitational lens time delays, (2) baryon acoustic oscillation (BAO), and (3) HI intensity map**. We describe the principles and theory behind each method, the ingredients needed for measuring such distances, the current observational results, and future prospects. Time delays from strongly lensed quasars currently p…
▽ More
We review three distance measurement techniques beyond the local universe: (1) gravitational lens time delays, (2) baryon acoustic oscillation (BAO), and (3) HI intensity map**. We describe the principles and theory behind each method, the ingredients needed for measuring such distances, the current observational results, and future prospects. Time delays from strongly lensed quasars currently provide constraints on $H_0$ with < 4% uncertainty, and with 1% within reach from ongoing surveys and efforts. Recent exciting discoveries of strongly lensed supernovae hold great promise for time-delay cosmography. BAO features have been detected in redshift surveys up to z <~ 0.8 with galaxies and z ~ 2 with Ly-$α$ forest, providing precise distance measurements and $H_0$ with < 2% uncertainty in flat $Λ$CDM. Future BAO surveys will probe the distance scale with percent-level precision. HI intensity map** has great potential to map BAO distances at z ~ 0.8 and beyond with precisions of a few percent. The next years ahead will be exciting as various cosmological probes reach 1% uncertainty in determining $H_0$, to assess the current tension in $H_0$ measurements that could indicate new physics.
△ Less
Submitted 22 July, 2018; v1 submitted 22 January, 2018;
originally announced January 2018.
-
H0LiCOW VIII. A weak lensing measurement of the external convergence in the field of the lensed quasar HE$\,$0435$-$1223
Authors:
O. Tihhonova,
F. Courbin,
D. Harvey,
S. Hilbert,
C. E. Rusu,
C. D. Fassnacht,
V. Bonvin,
P. J. Marshall,
G. Meylan,
D. Sluse,
S. H. Suyu,
T. Treu,
K. C. Wong
Abstract:
We present a weak gravitational lensing measurement of the external convergence along the line of sight to the quadruply lensed quasar HE$\,$0435$-$1223. Using deep r-band images from Subaru-Suprime-Cam we observe galaxies down to a 3$σ$ limiting magnitude of $\sim 26$ mags resulting in a source galaxy density of 14 galaxies / arcmin$^2$ after redshift-based cuts. Using an inpainting technique and…
▽ More
We present a weak gravitational lensing measurement of the external convergence along the line of sight to the quadruply lensed quasar HE$\,$0435$-$1223. Using deep r-band images from Subaru-Suprime-Cam we observe galaxies down to a 3$σ$ limiting magnitude of $\sim 26$ mags resulting in a source galaxy density of 14 galaxies / arcmin$^2$ after redshift-based cuts. Using an inpainting technique and Multi-Scale Entropy filtering algorithm, we find that the region in close proximity to the lens has an estimated external convergence of $κ=-0.012^{+0.020}_{-0.013}$ and is hence marginally under-dense. We also rule out the presence of any halo with a mass greater than $M_{\rm vir}=1.6\times10^{14}h^{-1}M_\odot$ (68$\%$ confidence limit). Our results, consistent with previous studies of this lens, confirm that the intervening mass along the line of sight to HE$\,$0435$-$1223 does not affect significantly the cosmological results inferred from the time delay measurements of that specific object.
△ Less
Submitted 23 November, 2017;
originally announced November 2017.
-
DES meets Gaia: discovery of strongly lensed quasars from a multiplet search
Authors:
A. Agnello,
H. Lin,
N. Kuropatkin,
E. Buckley-Geer,
T. Anguita,
P. L. Schechter,
T. Morishita,
V. Motta,
K. Rojas,
T. Treu,
A. Amara,
M. W. Auger,
F. Courbin,
C. D. Fassnacht,
J. Frieman,
A. More,
P. J. Marshall,
R. G. McMahon,
G. Meylan,
S. H. Suyu,
K. Glazebrook,
N. Morgan,
B. Nord,
T. M. C. Abbott,
F. B. Abdalla
, et al. (47 additional authors not shown)
Abstract:
We report the discovery, spectroscopic confirmation and first lens models of the first two, strongly lensed quasars from a combined search in WISE and Gaia over the DES footprint.
The four-image lensWGD2038-4008 (r.a.=20:38:02.65, dec.=-40:08:14.64) has source- and lens-redshifts $z_{s}=0.777 \pm 0.001$ and $z_l = 0.230 \pm 0.002$ respectively. Its deflector has effective radius…
▽ More
We report the discovery, spectroscopic confirmation and first lens models of the first two, strongly lensed quasars from a combined search in WISE and Gaia over the DES footprint.
The four-image lensWGD2038-4008 (r.a.=20:38:02.65, dec.=-40:08:14.64) has source- and lens-redshifts $z_{s}=0.777 \pm 0.001$ and $z_l = 0.230 \pm 0.002$ respectively. Its deflector has effective radius $R_{\rm eff} \approx 3.4^{\prime\prime}$, stellar mass $\log(M_{\star}/M_{\odot}) = 11.64^{+0.20}_{-0.43}$, and shows extended isophotal shape variation. Simple lens models yield Einstein radii $R_{\rm E}=(1.30\pm0.04)^{\prime\prime},$ axis ratio $q=0.75\pm0.1$ (compatible with that of the starlight) and considerable shear-ellipticity degeneracies. The two-image lensWGD2021-4115 (r.a.=20:21:39.45, dec.=--41:15:57.11) has $z_{s}=1.390\pm0.001$ and $z_l = 0.335 \pm 0.002$, and Einstein radius $R_{\rm E} = (1.1\pm0.1)^{\prime\prime},$ but higher-resolution imaging is needed to accurately separate the deflector and faint quasar image. We also show high-rank candidate doubles selected this way, some of which have been independently identified with different techniques, and discuss a DES+WISE quasar multiplet selection.
△ Less
Submitted 10 November, 2017;
originally announced November 2017.
-
Quasi-Stellar Objects acting as potential Strong Gravitational Lenses in the SDSS-III BOSS survey
Authors:
Romain A. Meyer,
Timothée Delubac,
Jean-Paul Kneib,
Frédéric Courbin
Abstract:
We present a sample of 12 Quasi-Stellar Objects (QSOs) potentially acting as strong gravitational lenses on background Emission Line Galaxies (ELG) or Lyman-$α$ Emitters (LAEs) selected selected through a systematic search of the 297301 QSOs in the Sloan Digital Sky Survey (SDSS)-III Data Release 12. Candidates are identified by looking for compound spectra, where emission lines at a redshift larg…
▽ More
We present a sample of 12 Quasi-Stellar Objects (QSOs) potentially acting as strong gravitational lenses on background Emission Line Galaxies (ELG) or Lyman-$α$ Emitters (LAEs) selected selected through a systematic search of the 297301 QSOs in the Sloan Digital Sky Survey (SDSS)-III Data Release 12. Candidates are identified by looking for compound spectra, where emission lines at a redshift larger than that of the quasar can be identified in the residuals after a QSO spectral template is subtracted from the observed spectra. The narrow diameter of BOSS fibers (2") then ensures that the object responsible for the additional emission lines must lie close to the line of sight of the QSO and hence provides a high probability of lensing. Among the 12 candidates identified, 9 have definite evidence for the presence of a background ELG identified by at least 4 higher-redshift nebular emission lines. The remaining $3$ probable candidates present a strong asymmetrical emission line attributed to a background Lyman-$α$ emitter (LAE). The QSO-ELG (QSO-LAE) lens candidates have QSO lens redshifts in the range $0.24\lesssim z_{QSO} \lesssim 0.66$ ($0.75 \lesssim z_{QSO} \lesssim 1.23$ ) and background galaxy redshifts in the range $0.48 \lesssim z_{S,ELG} \lesssim 0.94$ ($2.17 \lesssim z_{S,LAE} \lesssim 4.48$). We show that the algorithmic search is complete at >90% for QSO-ELG systems, whereas it falls at 40-60% for QSO-LAE, depending on the redshift of the source. Upon confirmation of the lensing nature of the systems, this sample may quadruple the number of known QSOs acting as strong lenses. We have determined the completeness of our search, which allows future studies to compute lensing probabilities of galaxies by QSOs and differentiate between different QSO models. (Abridged)
△ Less
Submitted 13 March, 2019; v1 submitted 3 November, 2017;
originally announced November 2017.
-
Proximity Operators for Phase Retrieval
Authors:
Ferréol Soulez,
Éric Thiébaut,
Antony Schutz,
André Ferrari,
Frédéric Courbin,
Michael Unser
Abstract:
We present a new formulation of a family of proximity operators that generalize the projector step for phase retrieval. These proximity operators for noisy intensity measurements can replace the classical "noise free" projection in any projection-based algorithm. They are derived from a maximum likelihood formulation and admit closed form solutions for both the Gaussian and the Poisson cases. In a…
▽ More
We present a new formulation of a family of proximity operators that generalize the projector step for phase retrieval. These proximity operators for noisy intensity measurements can replace the classical "noise free" projection in any projection-based algorithm. They are derived from a maximum likelihood formulation and admit closed form solutions for both the Gaussian and the Poisson cases. In addition, we extend these proximity operators to undersampled intensity measurements. To assess their performance, these operators are exploited in a classical Gerchberg Saxton algorithm. We present numerical experiments showing that the reconstructed complex amplitudes with these proximity operators perform always better than using the classical intensity projector while their computational overhead is moderate.
△ Less
Submitted 27 October, 2017;
originally announced October 2017.
-
Detecting unresolved binary stars in Euclid VIS images
Authors:
T. Kuntzer,
F. Courbin
Abstract:
Measuring a weak gravitational lensing signal to the level required by the next generation of space-based surveys demands exquisite reconstruction of the point-spread function (PSF). However, unresolved binary stars can significantly distort the PSF shape. In an effort to mitigate this bias, we aim at detecting unresolved binaries in realistic Euclid stellar populations. We tested methods in numer…
▽ More
Measuring a weak gravitational lensing signal to the level required by the next generation of space-based surveys demands exquisite reconstruction of the point-spread function (PSF). However, unresolved binary stars can significantly distort the PSF shape. In an effort to mitigate this bias, we aim at detecting unresolved binaries in realistic Euclid stellar populations. We tested methods in numerical experiments where (i) the PSF shape is known to Euclid requirements across the field of view, and (ii) the PSF shape is unknown. We drew simulated catalogues of PSF shapes for this proof-of-concept paper. Following the Euclid survey plan, the objects were observed four times. We propose three methods to detect unresolved binary stars. The detection is based on the systematic and correlated biases between exposures of the same object. One method is a simple correlation analysis, while the two others use supervised machine-learning algorithms (random forest and artificial neural network). In both experiments, we demonstrate the ability of our methods to detect unresolved binary stars in simulated catalogues. The performance depends on the level of prior knowledge of the PSF shape and the shape measurement errors. Good detection performances are observed in both experiments. Full complexity, in terms of the images and the survey design, is not included, but key aspects of a more mature pipeline are discussed. Finding unresolved binaries in objects used for PSF reconstruction increases the quality of the PSF determination at arbitrary positions. We show, using different approaches, that we are able to detect at least binary stars that are most damaging for the PSF reconstruction process.
△ Less
Submitted 28 August, 2017;
originally announced August 2017.
-
Dark matter dynamics in Abell 3827: new data consistent with standard Cold Dark Matter
Authors:
Richard Massey,
David Harvey,
Jori Liesenborgs,
Johan Richard,
Stuart Stach,
Mark Swinbank,
Peter Taylor,
Liliya Williams,
Douglas Clowe,
Frederic Courbin,
Alastair Edge,
Holger Israel,
Mathilde Jauzac,
Remy Joseph,
Eric Jullo,
Thomas D. Kitching,
Adrienne Leonard,
Julian Merten,
Daisuke Nagai,
James Nightingale,
Andrew Robertson,
Luis Javier Romualdez,
Prasenjit Saha,
Renske Smit,
Sut Ieng Tam
, et al. (1 additional authors not shown)
Abstract:
We present integral field spectroscopy of galaxy cluster Abell 3827, using ALMA and VLT/MUSE. It reveals an unusual configuration of strong gravitational lensing in the cluster core, with at least seven lensed images of a single background spiral galaxy. Lens modelling based on HST imaging had suggested that the dark matter associated with one of the cluster's central galaxies may be offset. The n…
▽ More
We present integral field spectroscopy of galaxy cluster Abell 3827, using ALMA and VLT/MUSE. It reveals an unusual configuration of strong gravitational lensing in the cluster core, with at least seven lensed images of a single background spiral galaxy. Lens modelling based on HST imaging had suggested that the dark matter associated with one of the cluster's central galaxies may be offset. The new spectroscopic data enable better subtraction of foreground light, and better identification of multiple background images. The inferred distribution of dark matter is consistent with being centered on the galaxies, as expected by LCDM. Each galaxy's dark matter also appears to be symmetric. Whilst we do not find an offset between mass and light (suggestive of self-interacting dark matter) as previously reported, the numerical simulations that have been performed to calibrate Abell 3827 indicate that offsets and asymmetry are still worth looking for in collisions with particular geometries. Meanwhile, ALMA proves exceptionally useful for strong lens image identifications.
△ Less
Submitted 14 August, 2017;
originally announced August 2017.