-
Capacitive temperature sensing via displacement amplification
Authors:
Semih Taniker,
Vincenzo Costanza,
Paolo Celli,
Chiara Daraio
Abstract:
We propose the realization of capacitive temperature sensors based on the concept of displacement amplification. Our design features two high coefficient of thermal expansion (CTE) metallic layers separated by a low-CTE dielectric layer; conductive and dielectric layers are then separated by a thin air gap and glued together at a few locations. As the temperature increases, the high-CTE layer tend…
▽ More
We propose the realization of capacitive temperature sensors based on the concept of displacement amplification. Our design features two high coefficient of thermal expansion (CTE) metallic layers separated by a low-CTE dielectric layer; conductive and dielectric layers are then separated by a thin air gap and glued together at a few locations. As the temperature increases, the high-CTE layer tends to expand more than the low-CTE one. Owing to the constraint to planar expansion imposed by the low-CTE layer, this results in large out-of-plane displacements of the high-CTE layer -- hence the displacement amplification term. In our case, the high-CTE layer buckles and causes a reduction of the gap between conductive and dielectric layers; in turn, this results in a large change of capacitance. First, we illustrate the concept via numerical simulations. Then, we realize a low-cost prototype of such sensor by using aluminum foil as conductor, paper as dielectric, and by gluing the layers together with cyanoacrylate. Our results demonstrate the potential of this simple design as a route towards efficient and low-cost temperature sensors.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
A flexible spiraling-metasurface as a versatile haptic interface
Authors:
Osama R. Bilal,
Vincenzo Costanza,
Ali Israr,
Antonio Palermo,
Paolo Celli,
Frances Lau,
Chiara Daraio
Abstract:
Haptic feedback is the most significant sensory interface following visual cues. Develo** thin, flexible surfaces that function as haptic interfaces is important for augmenting virtual reality, wearable devices, robotics and prostheses. For example, adding a haptic feedback interface to prosthesis could improve their acceptance among amputees. State of the art programmable interfaces targeting t…
▽ More
Haptic feedback is the most significant sensory interface following visual cues. Develo** thin, flexible surfaces that function as haptic interfaces is important for augmenting virtual reality, wearable devices, robotics and prostheses. For example, adding a haptic feedback interface to prosthesis could improve their acceptance among amputees. State of the art programmable interfaces targeting the skin feel-of-touch through mechano-receptors are limited by inadequate sensory feedback, cumbersome mechanisms or narrow frequency of operation. Here, we present a flexible metasurface as a generic haptic interface capable of producing complex tactile patterns on the human skin at wide range of frequencies. The metasurface is composed of multiple "pixels" that can locally amplify both input displacements and forces. Each of these pixels encodes various deformation patterns capable of producing different sensations on contact. The metasurface can transform a harmonic signal containing multiple frequencies into a complex preprogrammed tactile pattern. Our findings, corroborated by user studies conducted on human candidates, can open new avenues for wearable and robotic interfaces.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Biomimetic temperature sensing layer for artificial skins
Authors:
Raffaele Di Giacomo,
Luca Bonanomi,
Vincenzo Costanza,
Bruno Maresca,
Chiara Daraio
Abstract:
Artificial membranes that are sensitive to temperature are needed in robotics to augment interactions with humans and the environment and in bioengineering to improve prosthetic limbs. Existing flexible sensors achieved sensitivities of <100 mK and large responsivity albeit within narrow (<5 K) temperature ranges. Other flexible devices, working in wider temperature ranges, exhibit orders of magni…
▽ More
Artificial membranes that are sensitive to temperature are needed in robotics to augment interactions with humans and the environment and in bioengineering to improve prosthetic limbs. Existing flexible sensors achieved sensitivities of <100 mK and large responsivity albeit within narrow (<5 K) temperature ranges. Other flexible devices, working in wider temperature ranges, exhibit orders of magnitude poorer responses. However, much more versatile and temperature sensitive membranes are present in animals such as pit vipers, whose pit membranes have the highest sensitivity and responsivity in nature and are used to locate warm-blooded preys at distance. Here, we show that pectin films mimic the sensing mechanism of pit membranes and parallel their record performances. These films map temperature on surfaces with a sensitivity of at least 10 mK in a wide temperature range (45 K), have very high responsivity, and detect warm bodies at distance. The produced material can be integrated as a layer in artificial skins platforms and boost their temperature sensitivity to reach the best biological performance.
△ Less
Submitted 7 January, 2017; v1 submitted 3 December, 2015;
originally announced December 2015.