-
Earable and Wrist-worn Setup for Accurate Step Counting Utilizing Body-Area Electrostatic Sensing
Authors:
Sizhen Bian,
Rakita Strahinja,
Philipp Schilk,
Clénin Marc-André,
Silvano Cortesi,
Elio Reinschmidt,
Kanika Dheman,
Michele Magno
Abstract:
Step-counting has been widely implemented in wrist-worn devices and is accepted by end users as a quantitative indicator of everyday exercise. However, existing counting approach (mostly on wrist-worn setup) lacks robustness and thus introduces inaccuracy issues in certain scenarios like brief intermittent walking bouts and random arm motions or static arm status while walking (no clear correlatio…
▽ More
Step-counting has been widely implemented in wrist-worn devices and is accepted by end users as a quantitative indicator of everyday exercise. However, existing counting approach (mostly on wrist-worn setup) lacks robustness and thus introduces inaccuracy issues in certain scenarios like brief intermittent walking bouts and random arm motions or static arm status while walking (no clear correlation of motion pattern between arm and leg). This paper proposes a low-power step-counting solution utilizing the body area electric field acquired by a novel electrostatic sensing unit, consuming only 87.3 $μ$W of power, ho** to strengthen the robustness of current dominant solution. We designed two wearable devices for on-the-wrist and in-the-ear deployment and collected body-area electric field-derived motion signals from ten volunteers. Four walking scenarios are considered: in the parking lot/shop** center with/without pushing the shop** trolley. The step-counting accuracy from the prototypes shows better accuracy than the commercial wrist-worn devices (e.g.,96% of the wrist- and ear-worn prototype vs. 66% of the Fitbit when walking in the shop** center while pushing a shop** trolley). We finally discussed the potential and limitations of sensing body-area electric fields for wrist-worn and ear-worn step-counting and beyond.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Angle of Arrival and Centimeter Distance Estimation on a Smart UWB Sensor Node
Authors:
Tobias Margiani,
Silvano Cortesi,
Milena Keller,
Christian Vogt,
Tommaso Polonelli,
Michele Magno
Abstract:
Accurate and low-power indoor localization is becoming more and more of a necessity to empower novel consumer and industrial applications. In this field, the most promising technology is based on UWB modulation; however, current UWB positioning systems do not reach centimeter accuracy in general deployments due to multipath and nonisotropic antennas, still necessitating several fixed anchors to es…
▽ More
Accurate and low-power indoor localization is becoming more and more of a necessity to empower novel consumer and industrial applications. In this field, the most promising technology is based on UWB modulation; however, current UWB positioning systems do not reach centimeter accuracy in general deployments due to multipath and nonisotropic antennas, still necessitating several fixed anchors to estimate an object's position in space. This article presents an in-depth study and assessment of angle of arrival (AoA) UWB measurements using a compact, low-power solution integrating a novel commercial module with phase difference of arrival (PDoA) estimation as integrated feature. Results demonstrate the possibility of reaching centimeter distance precision and ang 2.4 average angular accuracy in many operative conditions, e.g., in a ang 90 range around the center. Moreover, integrating the channel impulse response, the phase differential of arrival, and the point-to-point distance, an error correction model is discussed to compensate for reflections, multipaths, and front-back ambiguity.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Evaluation of a Non-Coherent Ultra-Wideband Transceiver for Micropower Sensor Nodes
Authors:
Jonah Imfeld,
Silvano Cortesi,
Philipp Mayer,
Michele Magno
Abstract:
Spatial and contextual awareness has the potential to revolutionize sensor nodes, enabling spatially augmented data collection and location-based services. With its high bandwidth, superior energy efficiency, and precise time-of-flight measurements, ultra-wideband (UWB) technology emerges as an ideal solution for such devices.
This paper presents an evaluation and comparison of a non-coherent UW…
▽ More
Spatial and contextual awareness has the potential to revolutionize sensor nodes, enabling spatially augmented data collection and location-based services. With its high bandwidth, superior energy efficiency, and precise time-of-flight measurements, ultra-wideband (UWB) technology emerges as an ideal solution for such devices.
This paper presents an evaluation and comparison of a non-coherent UWB transceiver within the context of highly energy-constrained wireless sensing nodes and pervasive Internet of Things (IoT) devices. Experimental results highlight the unique properties of UWB transceivers, showcasing efficient data transfer ranging from 2 kbit/s to 7.2 Mbit/s while reaching an energy consumption of 0.29 nJ/bit and 1.39 nJ/bit for transmitting and receiving, respectively. Notably, a ranging accuracy of up to +/-25 cm can be achieved. Moreover, the peak power consumption of the UWB transceiver is with 6.7 mW in TX and 23 mW in RX significantly lower than that of other commercial UWB transceivers.
△ Less
Submitted 21 December, 2023; v1 submitted 24 November, 2023;
originally announced November 2023.
-
Energy-Aware Adaptive Sampling for Self-Sustainability in Resource-Constrained IoT Devices
Authors:
Marco Giordano,
Silvano Cortesi,
Prodromos-Vasileios Mekikis,
Michele Crabolu,
Giovanni Bellusci,
Michele Magno
Abstract:
In the ever-growing Internet of Things (IoT) landscape, smart power management algorithms combined with energy harvesting solutions are crucial to obtain self-sustainability. This paper presents an energy-aware adaptive sampling rate algorithm designed for embedded deployment in resource-constrained, battery-powered IoT devices. The algorithm, based on a finite state machine (FSM) and inspired by…
▽ More
In the ever-growing Internet of Things (IoT) landscape, smart power management algorithms combined with energy harvesting solutions are crucial to obtain self-sustainability. This paper presents an energy-aware adaptive sampling rate algorithm designed for embedded deployment in resource-constrained, battery-powered IoT devices. The algorithm, based on a finite state machine (FSM) and inspired by Transmission Control Protocol (TCP) Reno's additive increase and multiplicative decrease, maximizes sensor sampling rates, ensuring power self-sustainability without risking battery depletion. Moreover, we characterized our solar cell with data acquired over 48 days and used the model created to obtain energy data from an open-source world-wide dataset. To validate our approach, we introduce the EcoTrack device, a versatile device with global navigation satellite system (GNSS) capabilities and Long-Term Evolution Machine Type Communication (LTE-M) connectivity, supporting MQTT protocol for cloud data relay. This multi-purpose device can be used, for instance, as a health and safety wearable, remote hazard monitoring system, or as a global asset tracker. The results, validated on data from three different European cities, show that the proposed algorithm enables self-sustainability while maximizing sampled locations per day. In experiments conducted with a 3000 mAh battery capacity, the algorithm consistently maintained a minimum of 24 localizations per day and achieved peaks of up to 3000.
△ Less
Submitted 21 December, 2023; v1 submitted 31 October, 2023;
originally announced October 2023.
-
Optimizing IoT-Based Asset and Utilization Tracking: Efficient Activity Classification with MiniRocket on Resource-Constrained Devices
Authors:
Marco Giordano,
Silvano Cortesi,
Michele Crabolu,
Lavinia Pedrollo,
Giovanni Bellusci,
Tommaso Bendinelli,
Engin Türetken,
Andrea Dunbar,
Michele Magno
Abstract:
This paper introduces an effective solution for retrofitting construction power tools with low-power IoT to enable accurate activity classification. We address the challenge of distinguishing between when a power tool is being moved and when it is actually being used. To achieve classification accuracy and power consumption preservation a newly released algorithm called MiniRocket was employed. Kn…
▽ More
This paper introduces an effective solution for retrofitting construction power tools with low-power IoT to enable accurate activity classification. We address the challenge of distinguishing between when a power tool is being moved and when it is actually being used. To achieve classification accuracy and power consumption preservation a newly released algorithm called MiniRocket was employed. Known for its accuracy, scalability, and fast training for time-series classification, in this paper, it is proposed as a TinyML algorithm for inference on resource-constrained IoT devices. The paper demonstrates the portability and performance of MiniRocket on a resource-constrained, ultra-low power sensor node for floating-point and fixed-point arithmetic, matching up to 1% of the floating-point accuracy. The hyperparameters of the algorithm have been optimized for the task at hand to find a Pareto point that balances memory usage, accuracy and energy consumption. For the classification problem, we rely on an accelerometer as the sole sensor source, and BLE for data transmission. Extensive real-world construction data, using 16 different power tools, were collected, labeled, and used to validate the algorithm's performance directly embedded in the IoT device. Experimental results demonstrate that the proposed solution achieves an accuracy of 96.9% in distinguishing between real usage status and other motion statuses while consuming only 7kB of flash and 3kB of RAM. The final application exhibits an average current consumption of less than 15μW for the whole system, resulting in battery life performance ranging from 3 to 9 years depending on the battery capacity (250-500mAh) and the number of power tool usage hours (100-1500h).
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Design and Implementation of an RSSI-Based Bluetooth Low Energy Indoor Localization System
Authors:
Silvano Cortesi,
Marc Dreher,
Michele Magno
Abstract:
Indoor Positioning System (IPS) is a crucial technology that enables medical staff and hospital managements to accurately locate and track persons or assets inside the medical buildings. Among other technologies, Bluetooth Low Energy (BLE) can be exploited for achieving an energy-efficient and low-cost solution. This work presents the design and implementation of an received signal strength indica…
▽ More
Indoor Positioning System (IPS) is a crucial technology that enables medical staff and hospital managements to accurately locate and track persons or assets inside the medical buildings. Among other technologies, Bluetooth Low Energy (BLE) can be exploited for achieving an energy-efficient and low-cost solution. This work presents the design and implementation of an received signal strength indicator (RSSI)-based indoor localization system. The paper shows the implementation of a low complex weighted k-Nearest Neighbors algorithm that processes raw RSSI data from connection-less iBeacon's. The designed hardware and firmware are implemented around the low-power and low-cost nRF52832 from Nordic Semiconductor. Experimental evaluation with the real-time data processing has been evaluated and presented in a 7.2 m by 7.2 m room with furniture and 5 beacon nodes. The experimental results show an average error of only 0.72 m in realistic conditions. Finally, the overall power consumption of the fixed beacon with a periodic advertisement of 100 ms is only 50 uA at 3 V, which leads to a long-lasting solution of over one year with a 500 mAh coin battery.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Latency and Power Consumption in 2.4 GHz IoT Wireless Mesh Nodes: An Experimental Evaluation of Bluetooth Mesh and Wirepas Mesh
Authors:
Silvano Cortesi,
Christian Vogt,
Elio Reinschmidt,
Michele Magno
Abstract:
The rapid growth of the Internet of Things paradigm is pushing the need to connect billions of batteryoperated devices to the internet and among them. To address this need, the introduction of energy-efficient wireless mesh networks based on Bluetooth provides an effective solution. This paper proposes a testbed setup to accurately evaluate and compare the standard Bluetooth Mesh 5.0 and the emerg…
▽ More
The rapid growth of the Internet of Things paradigm is pushing the need to connect billions of batteryoperated devices to the internet and among them. To address this need, the introduction of energy-efficient wireless mesh networks based on Bluetooth provides an effective solution. This paper proposes a testbed setup to accurately evaluate and compare the standard Bluetooth Mesh 5.0 and the emerging energy-efficient Wirepas protocol that promises better performance. The paper presents the evaluation in terms of power consumption, energy efficiency, and transmission latency which are the most crucial features, in a controlled and reproducible test setup consisting of 10 nodes. Experimental results demonstrated that Wirepas has a median latency of 2.83 ms in Low-Latency mode respectively around 2 s in the Low-Energy mode. The corresponding power consumption is 6.2 mA in Low-Latency mode and 38.9 uA in Low-Energy mode. For Bluetooth Mesh the median latency is 4.54 ms with a power consumption of 6.2 mA at 3.3 V. Based on this comparison, conclusions about the advantages and disadvantages of both technologies can be drawn.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Sunspot data collection of Specola Solare Ticinese in Locarno
Authors:
Renzo Ramelli,
Marco Cagnotti,
Sergio Cortesi,
Michele Bianda,
Andrea Manna
Abstract:
Sunspot observations and counting are carried out at the Specola Solare Ticinese in Locarno since 1957 when it was built as an external observing station of the Zurich observatory. When in 1980 the data center responsibility was transferred from ETH Zurich to the Royal Observatory of Belgium in Brussels, the observations in Locarno continued and Specola Solare Ticinese got the role of pilot statio…
▽ More
Sunspot observations and counting are carried out at the Specola Solare Ticinese in Locarno since 1957 when it was built as an external observing station of the Zurich observatory. When in 1980 the data center responsibility was transferred from ETH Zurich to the Royal Observatory of Belgium in Brussels, the observations in Locarno continued and Specola Solare Ticinese got the role of pilot station. The data collected at Specola cover now the last 6 solar cycles.
The aim of this presentation is to discuss and give an overview about the Specola data collection, the applied counting method and the future archiving projects. The latter includes the publication of all data and drawings in digital form in collaboration with the ETH Zurich University Archives, where a parallel digitization project is ongoing for the document of the former Swiss Federal Observatory in Zurich collected since the time of Rudolph Wolf.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Sunspot Observations and Counting at Specola Solare Ticinese in Locarno since 1957
Authors:
Sergio Cortesi,
Marco Cagnotti,
Michele Bianda,
Renzo Ramelli,
Andrea Manna
Abstract:
Specola Solare Ticinese is an observatory dedicated to Sunspot Number counting, which was constructed in 1957 in Locarno, Southern Switzerland, as an external observing station of the Zurich Federal Observatory. When in 1981 the responsibility of the determination of the International Sunspot Number was assumed by the Royal Observatory of Belgium, Specola Solare Ticinese was given the role of pilo…
▽ More
Specola Solare Ticinese is an observatory dedicated to Sunspot Number counting, which was constructed in 1957 in Locarno, Southern Switzerland, as an external observing station of the Zurich Federal Observatory. When in 1981 the responsibility of the determination of the International Sunspot Number was assumed by the Royal Observatory of Belgium, Specola Solare Ticinese was given the role of pilot station, with the aim of preserving the continuity in the counting method. We report the observing procedure and counting rules applied in Locarno.
△ Less
Submitted 25 February, 2016;
originally announced February 2016.
-
The revised Brussels-Locarno Sunspot Number (1981-2015)
Authors:
Frédéric Clette,
Laure Lefèvre,
Marco Cagnotti,
Sergio Cortesi,
Andreas Bulling
Abstract:
In 1981, the production of the international Sunspot Number moved from the Zürich Observatory to the Royal Observatory of Belgium, marking a very important transition in the history of the Sunspot Number. Those recent decades are particularly important for linking recent modern solar indices and fluxes and the past Sunspot Number series. However, large variations have been recently identified in t…
▽ More
In 1981, the production of the international Sunspot Number moved from the Zürich Observatory to the Royal Observatory of Belgium, marking a very important transition in the history of the Sunspot Number. Those recent decades are particularly important for linking recent modern solar indices and fluxes and the past Sunspot Number series. However, large variations have been recently identified in the scale of the Sunspot Number between 1981 and the present.
Here, we reconstruct a new average Sunspot Number series $S_N$ using long-duration stations between 1981 and 2015. We also extend this reconstruction using long-time series from 35 stations over 1945-2015, which includes the 1981 transition. In both reconstructions, we also derive a parallel Group Number series $G_N$. Our results confirm the variable trends of the Locarno pilot station. We also verify the scale of the resulting 1981-2015 correction factor relative to the preceding period 1945--1980. By comparing the new $S_N$ and $G_N$ series, we find that a constant quadratic relation exists between those two indices. This proxy relation leads to a fully constant and cycle-independent $S_N/G_N$ ratio over cycles 19 to 23, with the exception of cycle 24. We find a very good agreement between our reconstructed $G_N$ and the new "backbone" Group Number but inhomogeneities in the original Group Number as well as the $F_{10.7}$ radio flux and the American sunspot number $R_a$.
This analysis opens the way to the implementation of a more advanced method for producing the Sunspot Number in the future. In particular, we identify the existence of distinct subsets of observing stations sharing very similar personal k factors, which may be a key element for building a future multi-station reference in place of the past single pilot station.
△ Less
Submitted 28 July, 2015;
originally announced July 2015.
-
The Effect of Sunspot Weighting
Authors:
Leif Svalgaard,
Marco Cagnotti,
Sergio Cortesi
Abstract:
Waldmeier in 1947 introduced a weighting (on a scale from 1 to 5) of the sunspot count made at Zurich and its auxiliary station Locarno, whereby larger spots were counted more than once. This counting method inflates the relative sunspot number over that which corresponds to the scale set by Wolfer and Brunner. Svalgaard re-counted some 60,000 sunspots on drawings from the reference station Locarn…
▽ More
Waldmeier in 1947 introduced a weighting (on a scale from 1 to 5) of the sunspot count made at Zurich and its auxiliary station Locarno, whereby larger spots were counted more than once. This counting method inflates the relative sunspot number over that which corresponds to the scale set by Wolfer and Brunner. Svalgaard re-counted some 60,000 sunspots on drawings from the reference station Locarno and determined that the number of sunspots reported were 'over counted' by 44% on average, leading to an inflation (measured by a weight factor) in excess of 1.2 for high solar activity. In a double-blind parallel counting by the Locarno observer Cagnotti, we determined that Svalgaard's count closely matches that of Cagnotti's, allowing us to determine the daily weight factor since 2003 (and sporadically before). We find that a simple empirical equation fits the observed weight factors well, and use that fit to estimate the weight factor for each month back to the introduction of weighting in 1947 and thus to be able to correct for the over-count and to reduce sunspot counting without weighting to the Wolfer method in use from 1893 onwards.
△ Less
Submitted 4 July, 2015;
originally announced July 2015.
