-
Ray-Tracing Calibration from Channel Sounding Measurements in a Millimeter-Wave Industrial Scenario
Authors:
Grégory Gougeon,
Frédéric Munoz,
Yoann Corre,
Raffaele D'Errico
Abstract:
New-generation communication and sensing systems are gaining strong interest in the context of Industry 4.0 e.g., related to map** techniques, environmental sensing, automation or hyper-vision. The radio propagation in confined, cluttered and heavily metalized factory environments is a critical challenge; thus an evaluation by accurate propagation channel models is necessary. Site-specific chann…
▽ More
New-generation communication and sensing systems are gaining strong interest in the context of Industry 4.0 e.g., related to map** techniques, environmental sensing, automation or hyper-vision. The radio propagation in confined, cluttered and heavily metalized factory environments is a critical challenge; thus an evaluation by accurate propagation channel models is necessary. Site-specific channel emulation can be obtained from Ray-tracing (RT); but RT validation for factory environments is still an on-going work. For this purpose, a measurement campaign was performed in a machine room with many metallic objects and machines, using a mmWave channel sounder. Wideband channel responses were collected and compared to RT simulations. The RT prediction tool was calibrated to minimize the error observed on some large scale statistics, thus reaching a very good agreement between the simulation and the measurement. Average error in received power, delay spread and azimuth spread is below 1.5 dB, 5 ns and 2° respectively.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Exploring RIS Coverage Enhancement in Factories: From Ray-Based Modeling to Use-Case Analysis
Authors:
Gurjot Singh Bhatia,
Yoann Corre,
Thierry Tenoux,
M. Di Renzo
Abstract:
Reconfigurable Intelligent Surfaces (RISs) have risen to the forefront of wireless communications research due to their proactive ability to alter the wireless environment intelligently, promising improved wireless network capacity and coverage. Thus, RISs are a pivotal technology in evolving next-generation communication networks. This paper demonstrates a system-level modeling approach for RIS.…
▽ More
Reconfigurable Intelligent Surfaces (RISs) have risen to the forefront of wireless communications research due to their proactive ability to alter the wireless environment intelligently, promising improved wireless network capacity and coverage. Thus, RISs are a pivotal technology in evolving next-generation communication networks. This paper demonstrates a system-level modeling approach for RIS. The RIS model, integrated with the Volcano ray-tracing (RT) tool, is used to analyze the far-field (FF) RIS channel properties in a typical factory environment and explore coverage enhancement at sub-6 GHz and mmWave frequencies. The results obtained in non-line-of-sight (NLoS) scenarios confirm that RIS application is relevant for 5G industrial networks.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Tuning of Ray-Based Channel Model for 5G Indoor Industrial Scenarios
Authors:
Gurjot Singh Bhatia,
Yoann Corre,
Marco Di Renzo
Abstract:
This paper presents an innovative method that can be used to produce deterministic channel models for 5G industrial internet-of-things (IIoT) scenarios. Ray-tracing (RT) channel emulation can capture many of the specific properties of a propagation scenario, which is incredibly beneficial when facing various industrial environments and deployment setups. But the environment's complexity, composed…
▽ More
This paper presents an innovative method that can be used to produce deterministic channel models for 5G industrial internet-of-things (IIoT) scenarios. Ray-tracing (RT) channel emulation can capture many of the specific properties of a propagation scenario, which is incredibly beneficial when facing various industrial environments and deployment setups. But the environment's complexity, composed of many metallic objects of different sizes and shapes, pushes the RT tool to its limits. In particular, the scattering or diffusion phenomena can bring significant components. Thus, in this article, the Volcano RT channel simulation is tuned and benchmarked against field measurements found in the literature at two frequencies relevant to 5G industrial networks: 3.7 GHz (mid-band) and 28 GHz (millimeter-wave (mmWave) band), to produce calibrated ray-based channel model. Both specular and diffuse scattering contributions are calculated. Finally, the tuned RT data is compared to measured large-scale parameters, such as the power delay profile (PDP), the cumulative distribution function (CDF) of delay spreads (DSs), both in line-of-sight (LoS) and non-LoS (NLoS) situations and relevant IIoT channel properties are further explored.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Efficient Ray-Tracing Channel Emulation in Industrial Environments: An Analysis of Propagation Model Impact
Authors:
Gurjot Singh Bhatia,
Yoann Corre,
M. Di Renzo
Abstract:
Industrial environments are considered to be severe from the point of view of electromagnetic (EM) wave propagation. When dealing with a wide range of industrial environments and deployment setups, ray-tracing channel emulation can capture many distinctive characteristics of a propagation scenario. Ray-tracing tools often require a detailed and accurate description of the propagation scenario. Con…
▽ More
Industrial environments are considered to be severe from the point of view of electromagnetic (EM) wave propagation. When dealing with a wide range of industrial environments and deployment setups, ray-tracing channel emulation can capture many distinctive characteristics of a propagation scenario. Ray-tracing tools often require a detailed and accurate description of the propagation scenario. Consequently, industrial environments composed of complex objects can limit the effectiveness of a ray-tracing tool and lead to computationally intensive simulations. This study analyzes the impact of using different propagation models by evaluating the number of allowed ray path interactions and digital scenario representation for an industrial environment. This study is realized using the Volcano ray-tracing tool at frequencies relevant to 5G industrial networks: 2 GHz (mid-band) and 28 GHz (high-band). This analysis can help in enhancing a ray-tracing tool that relies on a digital representation of the propagation environment to produce deterministic channel models for Indoor Factory (InF) scenarios, which can subsequently be used for industrial network design.
△ Less
Submitted 2 June, 2023;
originally announced June 2023.
-
Wireless Connectivity in the Sub-THz Spectrum: A Path to 6G
Authors:
Simon Bicaïs,
Jean-Baptiste Doré,
Majed Saad,
Mohammad Alawieh,
Faouzi Bader,
Jacques Palicot,
Yoann Corre,
Gregory Gougeon,
Emmanuel Faussurier
Abstract:
Wireless communication in millimetre wave bands, namely above 20 GHz and up to 300 GHz, is foreseen as a key enabler technology for the next generation of wireless systems. The huge available bandwidth is contemplated to achieve high data-rate wireless communications, and hence, to fulfil the requirements of future wireless networks. In this paper, we discuss and illustrate new paradigms for the s…
▽ More
Wireless communication in millimetre wave bands, namely above 20 GHz and up to 300 GHz, is foreseen as a key enabler technology for the next generation of wireless systems. The huge available bandwidth is contemplated to achieve high data-rate wireless communications, and hence, to fulfil the requirements of future wireless networks. In this paper, we discuss and illustrate new paradigms for the sub-THz physical layer, which either aim at maximizing the spectral efficiency, minimizing the device complexity, or finding good tradeoff. The solutions offered by appropriate modulation schemes and multi-antenna systems are assessed based on various potential scenarios.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
First heat flux estimation in the lower divertor of WEST with embedded thermal measurements
Authors:
J. Gaspar,
Y. Corre,
M. Firdaouss,
J. Gardarein,
J. Gerardin,
J. Gunn,
M. Houry,
G. Laffont,
T. Loarer,
M. Missirlian,
J. Morales,
P. Moreau,
C. Pocheau,
E. Tsitrone,
West Team
Abstract:
The present paper deals with the surface heat flux estimation with thermocouples (TC) and fiber Bragg grating (FBG) embedded in the plasma facing components (PFC) of the WEST tokamak. A 2D heat transfer model combined with the conjugate gradient method (CGM) and the adjoint state is used to estimate the plasma heat flux deposited on the PFC. The plasma heat flux is characterized by the time evolut…
▽ More
The present paper deals with the surface heat flux estimation with thermocouples (TC) and fiber Bragg grating (FBG) embedded in the plasma facing components (PFC) of the WEST tokamak. A 2D heat transfer model combined with the conjugate gradient method (CGM) and the adjoint state is used to estimate the plasma heat flux deposited on the PFC. The plasma heat flux is characterized by the time evolution of its amplitude and spatial shape on the target (heat flux decay length $λ^t_q$, power spreading in the private flux region $S^t$ and the strike point location $x_0$). As a first step, five ohmic pulses have been investigated with different magnetic configuration and divertor X-point height varying from 44 to 68 mm from the surface. Despite an outboard shift, the relative displacements of the outer strike point as well as the heat flux decay length derived from the TC/FBG systems are consistent with the magnetic equilibrium reconstruction.
△ Less
Submitted 28 February, 2019;
originally announced February 2019.
-
Experimental study of convection in the compressible regime
Authors:
Rémi Menaut,
Yoann Corre,
Ludovic Huguet,
Thomas Le Reun,
Thierry Alboussière,
Michael Bergman,
Renaud Deguen,
Stéphane Labrosse,
Marc Moulin
Abstract:
An experiment of thermal convection with significant compressible effects is presented. The high-gravity environment of a centrifuge and the choice of xenon gas enable us to observe an average adiabatic temperature gradient up to 3.5 K cm$^{-1}$ over a 4 cm high cavity. At the highest rotation rate investigated, 9990 rpm, the superadiabatic temperature difference applied to the gas layer is less t…
▽ More
An experiment of thermal convection with significant compressible effects is presented. The high-gravity environment of a centrifuge and the choice of xenon gas enable us to observe an average adiabatic temperature gradient up to 3.5 K cm$^{-1}$ over a 4 cm high cavity. At the highest rotation rate investigated, 9990 rpm, the superadiabatic temperature difference applied to the gas layer is less than the adiabatic temperature difference. The convective regime is characterized by a large Rayleigh number, about 10$^{12}$, and dominant Coriolis forces (Ekman number of order 10$^{-6}$). The analysis of temperature and pressure fluctuations in our experiments shows that the dynamics of the flow is in a quasi-geostrophic regime. Still, a classical power law (exponent 0.3 $\pm$ 0.04) is observed between the Nusselt number (dimensionless heat flux) and the superadiabatic Rayleigh number (dimensionless superadiabatic temperature difference). However, a potential hysteresis is seen between this classical high flux regime and a lower heat flux regime. It is unclear whether this is due to compressible or Coriolis effects. In the transient regime of convection from an isothermal state, we observe a local decrease of temperature which can only be explained by adiabatic decompression.
△ Less
Submitted 25 March, 2019; v1 submitted 11 December, 2018;
originally announced December 2018.
-
Assessing the Performance of a 60-GHz Dense Small-Cell Network Deployment from Ray-Based Simulations
Authors:
Yoann Corre,
Romain Charbonnier,
Mohammed Zahid Aslam,
Yves Lostanlen
Abstract:
Future dense small-cell networks are one key 5G candidates to offer outdoor high access data rates, especially in millimeter wave (mmWave) frequency bands. At those frequencies, the free space propagation loss and shadowing (from buildings, vegetation or any kind of obstacles) are far stronger than in the traditional radio cellular spectrum. Therefore, the cell range is expected to be limited to 5…
▽ More
Future dense small-cell networks are one key 5G candidates to offer outdoor high access data rates, especially in millimeter wave (mmWave) frequency bands. At those frequencies, the free space propagation loss and shadowing (from buildings, vegetation or any kind of obstacles) are far stronger than in the traditional radio cellular spectrum. Therefore, the cell range is expected to be limited to 50 - 100 meters, and directive high gain antennas are required at least for the base stations. This paper investigates the kind of topology that is required to serve a suburban area with a small-cell network operating at 60 GHz and equipped with beam-steering antennas. A real environment is considered to introduce practical deployment and propagation constraints. The analysis relies on Monte-Carlo system simulations with non-full buffer, and ray-based predictions. The ray-tracing techniques are today identified as a relevant solution to capture the main channel properties impacting the beam-steering performance (angular dispersion, inter-link correlation); and the one involved in the present study was specifically enhanced to deal with detailed vegetation modeling. In addition to the user outage, the paper evaluates the evolution of the inter-cell interference along with the user density, and investigates the network behavior in case of local strong obstructions.
△ Less
Submitted 10 November, 2016;
originally announced November 2016.
-
Characterisation of local ICRF heat loads on the JET ILW
Authors:
P. Jacquet,
F. Marcotte,
L. Colas,
G. Arnoux,
V. Bobkov,
Y. Corre,
S. Devaux,
J-L Gardarein,
E. Gauthier,
M. Graham,
E. Lerche,
M-L. Mayoral,
I. Monakhov,
F. Rimini,
A. Sirinelli,
D. Van Eester,
JET EFDA contributors
Abstract:
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of the tiles, heat-fluxes were evaluated from the sur…
▽ More
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of the tiles, heat-fluxes were evaluated from the surface temperature increase during the RF phase of L-mode plasmas. The maximum observed heat-flux intensity was ~ 4.5 MW/m2 when operating with -π/2 current drive strap phasing at power level of 2MW per antenna and with a 4 cm distance between the plasma and the outer limiters. Heat-fluxes are reduced when using dipole strap phasing. The fraction of ICRF power deposited on the antenna limiters or septa was in the range 2-10% for dipole phasing and 10-20% with +/-π/2 phasing.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.
