-
Self-Shielding Copper Substrate Neutron Supermirror Guides
Authors:
P. M. Bentley,
R. Hall-Wilton,
C. P. Cooper-Jensen,
N. Cherkashyna,
K. Kanaki,
C. Schanzer,
M. Schneider,
P. Boeni
Abstract:
The invention of self-shielding copper substrate neutron guides is described, along with the rationale behind the development, and the realisation of commercial supply. The relative advantages with respect to existing technologies are quantified. These include ease of manufacture, long lifetime, increased thermal conductivity, and enhanced fast neutron attenuation in the keV-MeV energy range. Whil…
▽ More
The invention of self-shielding copper substrate neutron guides is described, along with the rationale behind the development, and the realisation of commercial supply. The relative advantages with respect to existing technologies are quantified. These include ease of manufacture, long lifetime, increased thermal conductivity, and enhanced fast neutron attenuation in the keV-MeV energy range. Whilst the activation of copper is initially higher than for other material options, for the full energy spectrum, many of the isotopes are short-lived, so that for realistic maintenance access times the radiation dose to workers is expected to be lower than steel and in the lowest zoning category for radiation safety outside the spallation target monolith. There is no impact on neutron reflectivity performance relative to established alternatives, and the manufacturing cost is similar to other polished metal substrates.
△ Less
Submitted 16 April, 2021; v1 submitted 6 April, 2021;
originally announced April 2021.
-
Experimental study of concrete activation compared to MCNP simulations for safety of neutron sources
Authors:
D. Hajdú,
E. Dian,
K. Gméling,
E. Klinkby,
C. P. Cooper-Jensen,
J. Osán,
P. Zagyvai
Abstract:
The neutron activation of shielding materials and the generated decay gamma radiation are well-known issues in terms of occupational exposure. Though the trace elements of shielding concretes can be dominant sources of the produced activity in such cases, their concentrations are often missing from the input data of shielding-related Monte Carlo simulations. For this reason, three concrete types w…
▽ More
The neutron activation of shielding materials and the generated decay gamma radiation are well-known issues in terms of occupational exposure. Though the trace elements of shielding concretes can be dominant sources of the produced activity in such cases, their concentrations are often missing from the input data of shielding-related Monte Carlo simulations. For this reason, three concrete types were studied, that were considered in the European Spallation Source (ESS) ERIC. Their composition - including the trace elements - were determined via XRF, PGAA and NAA techniques. Realistic input data were developed for these materials, containing the parent elements of all the dominant radioisotopes, and were validated against measured data of neutron irradiation experiments.
△ Less
Submitted 14 September, 2020; v1 submitted 27 September, 2019;
originally announced September 2019.
-
The neutron tagging facility at Lund University
Authors:
F. Messi,
H. Perrey,
K. Fissum,
M. Akkawi,
R. Al Jebali,
J. R. M. Annand,
P. Bentley,
L. Boyd,
C. P. Cooper-Jensen,
D. D. DiJulio,
J. Freita-Ramos,
R. Hall-Wilton,
A. Huusko,
T. Ilves,
F. Issa,
A. Jalgén,
K. Kanaki,
E. Karnickis,
A. Khaplanov,
S. Koufigar,
V. Maulerova,
G. Mauri,
N. Mauritzson,
W. Pei,
F. Piscitelli
, et al. (5 additional authors not shown)
Abstract:
Over the last decades, the field of thermal neutron detection has overwhelmingly employed He-3-based technologies. The He-3 crisis together with the forthcoming establishment of the European Spallation Source have necessitated the development of new technologies for neutron detection. Today, several promising He-3-free candidates are under detailed study and need to be validated. This validation p…
▽ More
Over the last decades, the field of thermal neutron detection has overwhelmingly employed He-3-based technologies. The He-3 crisis together with the forthcoming establishment of the European Spallation Source have necessitated the development of new technologies for neutron detection. Today, several promising He-3-free candidates are under detailed study and need to be validated. This validation process is in general long and expensive. The study of detector prototypes using neutron-emitting radioactive sources is a cost-effective solution, especially for preliminary investigations. That said, neutron-emitting sources have the general disadvantage of broad, structured, emitted-neutron energy ranges. Further, the emitted neutrons often compete with unwanted backgrounds of gamma-rays, alpha-particles, and fission-fragments. By blending experimental infrastructure such as shielding to provide particle beams with neutron-detection techniques such as tagging, disadvantages may be converted into advantages. In particular, a technique known as tagging involves exploiting the mixed-field generally associated with a neutron-emitting source to determine neutron time-of-flight and thus energy on an event-by-event basis. This allows for the definition of low-cost, precision neutron beams. The Source-Testing Facility, located at Lund University in Sweden and operated by the SONNIG Group of the Division of Nuclear Physics, was developed for just such low-cost studies. Precision tagged-neutron beams derived from radioactive sources are available around-the-clock for advanced detector diagnostic studies. Neutron measurements performed at the Source Testing Facility are thus cost-effective and have a very low barrier for entry. In this paper, we present an overview of the project.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
Measurements and Monte-Carlo simulations of the particle self-shielding effect of B4C grains in neutron shielding concrete
Authors:
D. D. DiJulio,
C. P. Cooper-Jensen,
I. Llamas-Jansa,
S. Kazi,
P. M. Bentley
Abstract:
A combined measurement and Monte-Carlo simulation study was carried out in order to characterize the particle self-shielding effect of B4C grains in neutron shielding concrete. Several batches of a specialized neutron shielding concrete, with varying B4C grain sizes, were exposed to a 2 Å neutron beam at the R2D2 test beamline at the Institute for Energy Technology located in Kjeller, Norway. The…
▽ More
A combined measurement and Monte-Carlo simulation study was carried out in order to characterize the particle self-shielding effect of B4C grains in neutron shielding concrete. Several batches of a specialized neutron shielding concrete, with varying B4C grain sizes, were exposed to a 2 Å neutron beam at the R2D2 test beamline at the Institute for Energy Technology located in Kjeller, Norway. The direct and scattered neutrons were detected with a neutron detector placed behind the concrete blocks and the results were compared to Geant4 simulations. The particle self-shielding effect was included in the Geant4 simulations by calculating effective neutron cross-sections during the Monte-Carlo simulation process. It is shown that this method well reproduces the measured results. Our results show that shielding calculations for low-energy neutrons using such materials would lead to an underestimate of the shielding required for a certain design scenario if the particle self-shielding effect is not included in the calculations.
△ Less
Submitted 15 July, 2019; v1 submitted 16 November, 2017;
originally announced November 2017.
-
A Polyethylene-B4C based concrete for enhanced neutron shielding at neutron research facilities
Authors:
D. D. DiJulio,
C. P. Cooper-Jensen,
H. Perrey,
K. Fissum,
E. Rofors,
J. Scherzinger,
P. M. Bentley
Abstract:
We present the development of a specialized concrete for neutron shielding at neutron research facilities, based on the addition of hydrogen atoms in the form of polyethylene and also B$_{4}$C for enhancing the neutron capture properties of the concrete. We show information on the mechanical properties of the concrete and the neutronics, in particular it's relevance to modern spallation neutron so…
▽ More
We present the development of a specialized concrete for neutron shielding at neutron research facilities, based on the addition of hydrogen atoms in the form of polyethylene and also B$_{4}$C for enhancing the neutron capture properties of the concrete. We show information on the mechanical properties of the concrete and the neutronics, in particular it's relevance to modern spallation neutron sources, such as the European Spallation Source (ESS), currently under construction in Lund, Sweden. The new concrete exhibits a 15% lower mass density, a compressible strength of 50% relative to a standard concrete and a significant increase in performance of shielding against MeV neutrons and lower energies. The concrete could find application at the ESS in for example common shielding components, individual beamline shielding and instrument caves. Initial neutronic tests of the concrete, carried out at Lund University, have also verified the performance in the MeV neutron energy range and the results are presented.
△ Less
Submitted 4 July, 2017; v1 submitted 6 March, 2017;
originally announced March 2017.
-
Using Back-Scattering to Enhance Efficiency in Neutron Detectors
Authors:
Thomas Kittelmann,
Esben Klinkby,
Xiao Xiao Cai,
Kalliopi Kanaki,
Carsten P Cooper-Jensen,
Richard Hall-Wilton
Abstract:
The principle of using strongly scattering materials to recover efficiency in neutron detectors, via back-scattering of unconverted thermal neutrons, is discussed in general. Feasibility of the method is illustrated through Geant4-based simulations of a specific setup involving a moderator-like material placed behind a single layered boron-10 thin film gaseous detector.
The principle of using strongly scattering materials to recover efficiency in neutron detectors, via back-scattering of unconverted thermal neutrons, is discussed in general. Feasibility of the method is illustrated through Geant4-based simulations of a specific setup involving a moderator-like material placed behind a single layered boron-10 thin film gaseous detector.
△ Less
Submitted 10 September, 2015;
originally announced September 2015.
-
Overcoming High Energy Backgrounds at Pulsed Spallation Sources
Authors:
Nataliia Cherkashyna,
Richard J. Hall-Wilton,
Douglas D. DiJulio,
Anton Khaplanov,
Dorothea Pfeiffer,
Julius Scherzinger,
Carsten P. Cooper-Jensen,
Kevin G. Fissum,
Stuart Ansell,
Erik B. Iverson,
Georg Ehlers,
Franz X. Gallmeier,
Tobias Panzner,
Emmanouela Rantsiou,
Kalliopi Kanaki,
Uwe Filges,
Thomas Kittelmann,
Maddi Extegarai,
Valentina Santoro,
Oliver Kirstein,
Phillip M. Bentley
Abstract:
Instrument backgrounds at neutron scattering facilities directly affect the quality and the efficiency of the scientific measurements that users perform. Part of the background at pulsed spallation neutron sources is caused by, and time-correlated with, the emission of high energy particles when the proton beam strikes the spallation target. This prompt pulse ultimately produces a signal, which ca…
▽ More
Instrument backgrounds at neutron scattering facilities directly affect the quality and the efficiency of the scientific measurements that users perform. Part of the background at pulsed spallation neutron sources is caused by, and time-correlated with, the emission of high energy particles when the proton beam strikes the spallation target. This prompt pulse ultimately produces a signal, which can be highly problematic for a subset of instruments and measurements due to the time-correlated properties, and different to that from reactor sources. Measurements of this background have been made at both SNS (ORNL, Oak Ridge, TN, USA) and SINQ (PSI, Villigen, Switzerland). The background levels were generally found to be low compared to natural background. However, very low intensities of high-energy particles have been found to be detrimental to instrument performance in some conditions. Given that instrument performance is typically characterised by S/N, improvements in backgrounds can both improve instrument performance whilst at the same time delivering significant cost savings. A systematic holistic approach is suggested in this contribution to increase the effectiveness of this. Instrument performance should subsequently benefit.
△ Less
Submitted 10 January, 2015;
originally announced January 2015.
