-
Importance of elastic finite-size effects: neutral defects in ionic compounds
Authors:
P. A. Burr,
M. W. D. Cooper
Abstract:
Small system sizes are a well known source of error in DFT calculations, yet computational constraints frequently dictate the use of small supercells, often as small as 96 atoms in oxides and compound semiconductors. In ionic compounds, electrostatic finite size effects have been well characterised, but self-interaction of charge neutral defects is often discounted or assumed to follow an asymptot…
▽ More
Small system sizes are a well known source of error in DFT calculations, yet computational constraints frequently dictate the use of small supercells, often as small as 96 atoms in oxides and compound semiconductors. In ionic compounds, electrostatic finite size effects have been well characterised, but self-interaction of charge neutral defects is often discounted or assumed to follow an asymptotic behaviour and thus easily corrected with linear elastic theory. Here we show that elastic effects are also important in the description of defects in ionic compounds and can lead to qualitatively incorrect conclusions if inadequately small supercells are used; moreover, the spurious self-interaction does not follow the behaviour predicted by linear elastic theory. Considering the exemplar cases of metal oxides with fluorite structure, we show that numerous previous studies, employing 96-atom supercells, misidentify the ground state structure of (charge neutral) Schottky defects. We show that the error is eliminated by employing larger cells (324, 768 and 1500 atoms), and careful analysis determines that elastic effects, not electrostatic, are responsible. The spurious self-interaction was also observed in non-oxide ionic compounds and irrespective of the computational method used, thereby resolving long standing discrepancies between DFT and force-field methods, previously attributed to the level of theory. The surprising magnitude of the elastic effects are a cautionary tale for defect calculations in ionic materials, particularly when employing computationally expensive methods or when modelling large defect clusters. We propose two computationally practicable methods to test the magnitude of the elastic self-interaction in any ionic system.
△ Less
Submitted 6 September, 2017;
originally announced September 2017.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Finitely forcible graph limits are universal
Authors:
Jacob W. Cooper,
Daniel Kral,
Taisa L. Martins
Abstract:
The theory of graph limits represents large graphs by analytic objects called graphons. Graph limits determined by finitely many graph densities, which are represented by finitely forcible graphons, arise in various scenarios, particularly within extremal combinatorics. Lovasz and Szegedy conjectured that all such graphons possess a simple structure, e.g., the space of their typical vertices is al…
▽ More
The theory of graph limits represents large graphs by analytic objects called graphons. Graph limits determined by finitely many graph densities, which are represented by finitely forcible graphons, arise in various scenarios, particularly within extremal combinatorics. Lovasz and Szegedy conjectured that all such graphons possess a simple structure, e.g., the space of their typical vertices is always finite dimensional; this was disproved by several ad hoc constructions of complex finitely forcible graphons. We prove that any graphon is a subgraphon of a finitely forcible graphon. This dismisses any hope for a result showing that finitely forcible graphons possess a simple structure, and is surprising when contrasted with the fact that finitely forcible graphons form a meager set in the space of all graphons. In addition, since any finitely forcible graphon represents the unique minimizer of some linear combination of densities of subgraphs, our result also shows that such minimization problems, which conceptually are among the simplest kind within extremal graph theory, may in fact have unique optimal solutions with arbitrarily complex structure.
△ Less
Submitted 9 October, 2018; v1 submitted 13 January, 2017;
originally announced January 2017.
-
Overview of recent physics results from MAST
Authors:
A Kirk,
J Adamek,
RJ Akers,
S Allan,
L Appel,
F Arese Lucini,
M Barnes,
T Barrett,
N Ben Ayed,
W Boeglin,
J Bradley,
P K Browning,
J Brunner,
P Cahyna,
M Carr,
F Casson,
M Cecconello,
C Challis,
IT Chapman,
S Chapman,
S Conroy,
N Conway,
WA Cooper,
M Cox,
N Crocker
, et al. (138 additional authors not shown)
Abstract:
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbu…
▽ More
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbulence. At the edge detailed studies have revealed how filament characteristic are responsible for determining the near and far SOL density profiles. In the core the intrinsic rotation and electron scale turbulence have been measured. The role that the fast ion gradient has on redistributing fast ions through fishbone modes has led to a redesign of the neutral beam injector on MAST Upgrade. In H-mode the turbulence at the pedestal top has been shown to be consistent with being due to electron temperature gradient modes. A reconnection process appears to occur during ELMs and the number of filaments released determines the power profile at the divertor. Resonant magnetic perturbations can mitigate ELMs provided the edge peeling response is maximised and the core kink response minimised. The mitigation of intrinsic error fields with toroidal mode number n>1 has been shown to be important for plasma performance.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
Optimal-size clique transversals in chordal graphs
Authors:
Jacob W. Cooper,
Andrzej Grzesik,
Daniel Kral
Abstract:
The following question was raised by Tuza in 1990 and Erdos et al. in 1992: if every edge of an n-vertex chordal graph G is contained in a clique of size at least four, does G have a clique transversal, i.e., a set of vertices meeting all non-trivial maximal cliques, of size at most n/4? We prove that every such graph G has a clique transversal of size at most 2(n-1)/7 if n>=5, which is the best p…
▽ More
The following question was raised by Tuza in 1990 and Erdos et al. in 1992: if every edge of an n-vertex chordal graph G is contained in a clique of size at least four, does G have a clique transversal, i.e., a set of vertices meeting all non-trivial maximal cliques, of size at most n/4? We prove that every such graph G has a clique transversal of size at most 2(n-1)/7 if n>=5, which is the best possible bound.
△ Less
Submitted 3 April, 2018; v1 submitted 20 January, 2016;
originally announced January 2016.
-
Weak regularity and finitely forcible graph limits
Authors:
Jacob W. Cooper,
Tomas Kaiser,
Daniel Kral,
Jonathan A. Noel
Abstract:
Graphons are analytic objects representing limits of convergent sequences of graphs. Lovász and Szegedy conjectured that every finitely forcible graphon, i.e. any graphon determined by finitely many graph densities, has a simple structure. In particular, one of their conjectures would imply that every finitely forcible graphon has a weak $\varepsilon$-regular partition with the number of parts bou…
▽ More
Graphons are analytic objects representing limits of convergent sequences of graphs. Lovász and Szegedy conjectured that every finitely forcible graphon, i.e. any graphon determined by finitely many graph densities, has a simple structure. In particular, one of their conjectures would imply that every finitely forcible graphon has a weak $\varepsilon$-regular partition with the number of parts bounded by a polynomial in $\varepsilon^{-1}$. We construct a finitely forcible graphon $W$ such that the number of parts in any weak $\varepsilon$-regular partition of $W$ is at least exponential in $\varepsilon^{-2}/2^{5\log^*\varepsilon^{-2}}$. This bound almost matches the known upper bound for graphs and, in a certain sense, is the best possible for graphons.
△ Less
Submitted 26 August, 2016; v1 submitted 30 June, 2015;
originally announced July 2015.
-
Trap** in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker
Authors:
W. Adam,
T. Bergauer,
M. Dragicevic,
M. Friedl,
R. Fruehwirth,
M. Hoch,
J. Hrubec,
M. Krammer,
W. Treberspurg,
W. Waltenberger,
S. Alderweireldt,
W. Beaumont,
X. Janssen,
S. Luyckx,
P. Van Mechelen,
N. Van Remortel,
A. Van Spilbeeck,
P. Barria,
C. Caillol,
B. Clerbaux,
G. De Lentdecker,
D. Dobur,
L. Favart,
A. Grebenyuk,
Th. Lenzi
, et al. (663 additional authors not shown)
Abstract:
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi…
▽ More
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trap** rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trap** rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trap** rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
Hybrid guiding-centre/full-orbit simulations in non-axisymmetric magnetic geometry exploiting general criterion for guiding-centre accuracy
Authors:
David Pfefferlé,
Jonathan P. Graves,
Wilfred A. Cooper
Abstract:
To identify under what conditions guiding-centre or full-orbit tracing should be used, an estimation of the spatial variation of the magnetic field is proposed, not only taking into account gradient and curvature terms but also parallel currents and the local shearing of field-lines. The criterion is derived for general three-dimensional magnetic equilibria including stellarator plasmas. Details a…
▽ More
To identify under what conditions guiding-centre or full-orbit tracing should be used, an estimation of the spatial variation of the magnetic field is proposed, not only taking into account gradient and curvature terms but also parallel currents and the local shearing of field-lines. The criterion is derived for general three-dimensional magnetic equilibria including stellarator plasmas. Details are provided on how to implement it in cylindrical coordinates, and in flux coordinates that rely on the geometric toroidal angle. A means of switching between guiding-centre and full-orbit equations at first order in Larmor radius with minimal discrepancy is shown. Techniques are applied to a MAST (Mega Amp Spherical Tokamak) helical core equilibrium in which the inner kinked flux-surfaces are tightly compressed against the outer axisymmetric mantle and where the parallel current peaks at the nearly rational surface. This is put in relation with the simpler situation $\vec{B}(x,y,z) = B_0 [\sin(kx) \vec{e_y} + \cos(kx)\vec{e_z}]$, for which full orbits and lowest order drifts are obtained analytically. In the kinked equilibrium, the full orbits of NBI fast ions are solved numerically and shown to follow helical drift surfaces. This result partially explains the off-axis redistribution of NBI fast particles in the presence of MAST Long-Lived Modes (LLM).
△ Less
Submitted 26 February, 2015; v1 submitted 17 December, 2014;
originally announced December 2014.
-
The Heavy Photon Search Test Detector
Authors:
Marco Battaglieri,
Sergey Boyarinov,
Stephen Bueltmann,
Volker Burkert,
Andrea Celentano,
Gabriel Charles,
William Cooper,
Chris Cuevas,
Natalia Dashyan,
Raffaella DeVita,
Camille Desnault,
Alexandre Deur,
Hovanes Egiyan,
Latifa Elouadrhiri,
Rouven Essig,
Vitaliy Fadeyev,
Clive Field,
Arne Freyberger,
Yuri Gershtein,
Nerses Gevorgyan,
Francois-Xavier Girod,
Norman Graf,
Mathew Graham,
Keith Griffioen,
Alexander Grillo
, et al. (39 additional authors not shown)
Abstract:
The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment's technical feasibility and to confirm th…
▽ More
The Heavy Photon Search (HPS), an experiment to search for a hidden sector photon in fixed target electroproduction, is preparing for installation at the Thomas Jefferson National Accelerator Facility (JLab) in the Fall of 2014. As the first stage of this project, the HPS Test Run apparatus was constructed and operated in 2012 to demonstrate the experiment's technical feasibility and to confirm that the trigger rates and occupancies are as expected. This paper describes the HPS Test Run apparatus and readout electronics and its performance. In this setting, a heavy photon can be identified as a narrow peak in the e$^+$e$^-$ invariant mass spectrum, above the trident background or as a narrow invariant mass peak with a decay vertex displaced from the production target, so charged particle tracking and vertexing are needed for its detection. In the HPS Test Run, charged particles are measured with a compact forward silicon microstrip tracker inside a dipole magnet. Electromagnetic showers are detected in a PbW0$_{4}$ crystal calorimeter situated behind the magnet, and are used to trigger the experiment and identify electrons and positrons. Both detectors are placed close to the beam line and split top-bottom. This arrangement provides sensitivity to low-mass heavy photons, allows clear passage of the unscattered beam, and avoids the spray of degraded electrons coming from the target. The discrimination between prompt and displaced e$^+$e$^-$ pairs requires the first layer of silicon sensors be placed only 10~cm downstream of the target. The expected signal is small, and the trident background huge, so the experiment requires very large statistics. Accordingly, the HPS Test Run utilizes high-rate readout and data acquisition electronics and a fast trigger to exploit the essentially 100% duty cycle of the CEBAF accelerator at JLab.
△ Less
Submitted 4 June, 2015; v1 submitted 23 June, 2014;
originally announced June 2014.
-
Sensor Compendium
Authors:
M. Artuso,
M. Battaglia,
G. Bolla,
D. Bortoletto,
B. Cabrera,
J. E. Carlstrom,
C. L. Chang,
W. Cooper,
C. Da Via,
M. Demarteau,
J. Fast,
H. Frisch,
M. Garcia-Sciveres,
S. Golwala,
C. Haber,
J. Hall,
E. Hoppe,
K. D. Irwin,
H. Kagan,
C. Kenney,
A. T. Lee,
D. Lynn,
J. Orrell,
M. Pyle,
R. Rusack
, et al. (7 additional authors not shown)
Abstract:
Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, e…
▽ More
Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges
△ Less
Submitted 25 October, 2013; v1 submitted 18 October, 2013;
originally announced October 2013.
-
Combination of CDF and D0 W-Boson Mass Measurements
Authors:
CDF Collaboration,
T. Aaltonen,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
T. Bae,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
F. Bedeschi
, et al. (752 additional authors not shown)
Abstract:
We summarize and combine direct measurements of the mass of the $W$ boson in $\sqrt{s} = 1.96 \text{TeV}$ proton-antiproton collision data collected by CDF and D0 experiments at the Fermilab Tevatron Collider. Earlier measurements from CDF and D0 are combined with the two latest, more precise measurements: a CDF measurement in the electron and muon channels using data corresponding to…
▽ More
We summarize and combine direct measurements of the mass of the $W$ boson in $\sqrt{s} = 1.96 \text{TeV}$ proton-antiproton collision data collected by CDF and D0 experiments at the Fermilab Tevatron Collider. Earlier measurements from CDF and D0 are combined with the two latest, more precise measurements: a CDF measurement in the electron and muon channels using data corresponding to $2.2 \mathrm{fb}^{-1}$ of integrated luminosity, and a D0 measurement in the electron channel using data corresponding to $4.3 \mathrm{fb}^{-1}$ of integrated luminosity. The resulting Tevatron average for the mass of the $W$ boson is $\MW = 80\,387 \pm 16 \text{MeV}$. Including measurements obtained in electron-positron collisions at LEP yields the most precise value of $\MW = 80\,385 \pm 15 \text{MeV}$.
△ Less
Submitted 1 August, 2013; v1 submitted 29 July, 2013;
originally announced July 2013.
-
Towards understanding edge localised mode mitigation by resonant magnetic perturbations in MAST
Authors:
I. T. Chapman,
A. Kirk,
C. J. Ham,
J. R. Harrison,
Y. Q. Liu,
S. Saarelma,
R. Scannell,
A. J. Thornton,
M. Becoulet,
F. Orain,
W. A. Cooper,
S. Pamela,
MAST Team
Abstract:
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a signifi…
▽ More
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a significant drop in the edge pressure gradient, which would be expected to stabilise the peeling-ballooning modes thought to be responsible for type-I ELMs. Various mechanisms which could cause a destabilisation of the peeling-ballooning modes are presented, including pedestal widening, plasma rotation braking, three dimensional corrugation of the plasma boundary and the existence of radially extended lobe structures near to the X-point. This leads to a model aimed at resolving the apparent dichotomy of ELM control, that is to say ELM suppression occurring due to the pedestal pressure reduction below the peeling-ballooning stability boundary, whilst the reduction in pressure can also lead to ELM mitigation, which is ostensibly a destabilisation of peeling-ballooning modes. In the case of ELM mitigation, the pedestal broadening, 3d corrugation or lobes near the X-point degrade ballooning stability so much that the pedestal recovers rapidly to cross the new stability boundary at lower pressure more frequently, whilst in the case of suppression, the plasma parameters are such that the particle transport reduces the edge pressure below the stability boundary which is only mildly affected by negligible rotation braking, small edge corrugation or short, broad lobe structures.
△ Less
Submitted 16 May, 2013;
originally announced May 2013.
-
Combination of the top-quark mass measurements from the Tevatron collider
Authors:
The CDF,
D0 collaborations,
T. Aaltonen,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
B. Alvarez Gonzalez,
G. Alverson,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
A. Askew
, et al. (840 additional authors not shown)
Abstract:
The top quark is the heaviest known elementary particle, with a mass about 40 times larger than the mass of its isospin partner, the bottom quark. It decays almost 100% of the time to a $W$ boson and a bottom quark. Using top-antitop pairs at the Tevatron proton-antiproton collider, the CDF and {\dzero} collaborations have measured the top quark's mass in different final states for integrated lumi…
▽ More
The top quark is the heaviest known elementary particle, with a mass about 40 times larger than the mass of its isospin partner, the bottom quark. It decays almost 100% of the time to a $W$ boson and a bottom quark. Using top-antitop pairs at the Tevatron proton-antiproton collider, the CDF and {\dzero} collaborations have measured the top quark's mass in different final states for integrated luminosities of up to 5.8 fb$^{-1}$. This paper reports on a combination of these measurements that results in a more precise value of the mass than any individual decay channel can provide. It describes the treatment of the systematic uncertainties and their correlations. The mass value determined is $173.18 \pm 0.56 \thinspace ({\rm stat}) \pm 0.75 \thinspace ({\rm syst})$ GeV or $173.18 \pm 0.94$ GeV, which has a precision of $\pm 0.54%$, making this the most precise determination of the top quark mass.
△ Less
Submitted 16 November, 2012; v1 submitted 4 July, 2012;
originally announced July 2012.
-
Measurement of the differential cross section dσ/dt in elastic $p\bar{p}$ scattering at sqrt(s)=1.96 TeV
Authors:
D0 Collaboration,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
G. Alverson,
G. A. Alves,
M. Aoki,
A. Askew,
S. Atkins,
K. Augsten,
C. Avila,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee,
E. Barberis,
P. Baringer,
J. Barreto,
J. F. Bartlett
, et al. (384 additional authors not shown)
Abstract:
We present a measurement of the elastic differential cross section $dσ(p\bar{p}\rightarrow p\bar{p})/dt$ as a function of the four-momentum-transfer squared t. The data sample corresponds to an integrated luminosity of $\approx 31 nb^{-1}$ collected with the D0 detector using dedicated Tevatron $p\bar{p} $ Collider operating conditions at sqrt(s) = 1.96 TeV and covers the range…
▽ More
We present a measurement of the elastic differential cross section $dσ(p\bar{p}\rightarrow p\bar{p})/dt$ as a function of the four-momentum-transfer squared t. The data sample corresponds to an integrated luminosity of $\approx 31 nb^{-1}$ collected with the D0 detector using dedicated Tevatron $p\bar{p} $ Collider operating conditions at sqrt(s) = 1.96 TeV and covers the range $0.26 <|t|< 1.2 GeV^2$. For $|t|<0.6 GeV^2$, dσ/dt is described by an exponential function of the form $Ae^{-b|t|}$ with a slope parameter $ b = 16.86 \pm 0.10(stat) \pm 0.20(syst) GeV^{-2}$. A change in slope is observed at $|t| \approx 0.6 GeV^2$, followed by a more gradual |t| dependence with increasing values of |t|.
△ Less
Submitted 4 June, 2012;
originally announced June 2012.
-
Combination of CDF and D0 measurements of the W boson helicity in top quark decays
Authors:
The CDF,
D0 Collaborations,
:,
T. Aaltonen,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
B. Álvarez González,
G. Alverson,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
M. Aoki,
G. Apollinari,
J. A. Appel,
T. Arisawa,
A. Artikov,
J. Asaadi
, et al. (846 additional authors not shown)
Abstract:
We report the combination of recent measurements of the helicity of the W boson from top quark decay by the CDF and D0 collaborations, based on data samples corresponding to integrated luminosities of 2.7 - 5.4 fb^-1 of ppbar collisions collected during Run II of the Fermilab Tevatron Collider. Combining measurements that simultaneously determine the fractions of W bosons with longitudinal (f0) an…
▽ More
We report the combination of recent measurements of the helicity of the W boson from top quark decay by the CDF and D0 collaborations, based on data samples corresponding to integrated luminosities of 2.7 - 5.4 fb^-1 of ppbar collisions collected during Run II of the Fermilab Tevatron Collider. Combining measurements that simultaneously determine the fractions of W bosons with longitudinal (f0) and right-handed (f+) helicities, we find f0 = 0.722 \pm 0.081 [\pm 0.062 (stat.) \pm 0.052 (syst.)] and f+ = -0.033 \pm 0.046 [\pm 0.034 (stat.) \pm 0.031 (syst.)]. Combining measurements where one of the helicity fractions is fixed to the value expected in the standard model, we find f0 = 0.682 \pm 0.057 [\pm 0.035 (stat.) \pm 0.046 (syst.)] and f+ = -0.015\pm0.035 [\pm 0.018 (stat.) \pm 0.030 (syst.)]. The results are consistent with standard model expectations.
△ Less
Submitted 23 February, 2012;
originally announced February 2012.
-
Search for pair production of the scalar top quark in muon+tau final states
Authors:
D0 Collaboration,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
G. Alverson,
M. Aoki,
A. Askew,
B. Asman,
S. Atkins,
O. Atramentov,
K. Augsten,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee,
E. Barberis,
P. Baringer
, et al. (385 additional authors not shown)
Abstract:
We present a search for the pair production of scalar top quarks ($\tilde{t}_{1}$), the lightest supersymmetric partners of the top quarks, in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV, using data corresponding to an integrated luminosity of {7.3 $fb^{-1}$} collected with the \dzero experiment at the Fermilab Tevatron Collider. Each scalar top quark is assumed to decay into a…
▽ More
We present a search for the pair production of scalar top quarks ($\tilde{t}_{1}$), the lightest supersymmetric partners of the top quarks, in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV, using data corresponding to an integrated luminosity of {7.3 $fb^{-1}$} collected with the \dzero experiment at the Fermilab Tevatron Collider. Each scalar top quark is assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino ($\tildeν$). We investigate final states arising from $\tilde{t}_{1} \bar{\tilde{t}_{1}} \rightarrow b\bar{b}μτ\tildeν \tildeν$ and $\tilde{t}_{1} \bar{\tilde{t}_{1}} \rightarrow b\bar{b}ττ\tildeν \tildeν$. With no significant excess of events observed above the background expected from the standard model, we set exclusion limits on this production process in the ($m_{\tilde{t}_{1}}$,$m_{\tildeν}$) plane.
△ Less
Submitted 9 February, 2012;
originally announced February 2012.
-
Precise measurement of the top quark mass in the dilepton channel at D0
Authors:
D0 Collaboration,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
G. Alverson,
G. A. Alves,
L. S. Ancu,
M. Aoki,
M. Arov,
A. Askew,
B. Åsman,
O. Atramentov,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee,
E. Barberis
, et al. (397 additional authors not shown)
Abstract:
We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV…
▽ More
We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV, which is in agreement with the current world average mt = 173.3 +- 1.1 GeV. This is currently the most precise measurement of mt in the dilepton channel.
△ Less
Submitted 28 August, 2011; v1 submitted 2 May, 2011;
originally announced May 2011.
-
Measurement of the W boson helicity in top quark decays using 5.4 fb^-1 of ppbar collision data
Authors:
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Altona,
G. Alverson,
G. A. Alves,
L. S. Ancu,
M. Aoki,
Y. Arnoud,
M. Arov,
A. Askew,
B. Asman,
O. Atramentov,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee,
E. Barberis
, et al. (403 additional authors not shown)
Abstract:
We present a measurement of the helicity of the W boson produced in top quark decays using ttbar decays in the l+jets and dilepton final states selected from a sample of 5.4 fb^-1 of collisions recorded using the D0 detector at the Fermilab Tevatron ppbar collider. We measure the fractions of longitudinal and right-handed W bosons to be f_0 = 0.669 +- 0.102 [ +- 0.078 (stat.) +- 0.065 (syst.)] and…
▽ More
We present a measurement of the helicity of the W boson produced in top quark decays using ttbar decays in the l+jets and dilepton final states selected from a sample of 5.4 fb^-1 of collisions recorded using the D0 detector at the Fermilab Tevatron ppbar collider. We measure the fractions of longitudinal and right-handed W bosons to be f_0 = 0.669 +- 0.102 [ +- 0.078 (stat.) +- 0.065 (syst.)] and f_+ = 0.023 +- 0.053 [+- 0.041 (stat.) +- 0.034 (syst.)], respectively. This result is consistent at the 98% level with the standard model. A measurement with f_0 fixed to the value from the standard model yields f_+ = 0.010 +- 0.037 [+- 0.022 (stat.) +- 0.030 (syst.) ].
△ Less
Submitted 20 September, 2012; v1 submitted 30 November, 2010;
originally announced November 2010.
-
Architecture of a Silicon Strip Beam Position Monitor
Authors:
R. Angstadt,
W. Cooper,
M. Demarteau,
J. Green,
S. Jakubowski,
A. Prosser,
R. Rivera,
M. Turqueti,
M. Utes,
Xiao Cai
Abstract:
A collaboration between Fermilab and the Institute for High Energy Physics (IHEP), Bei**g, has developed a beam position monitor for the IHEP test beam facility. This telescope is based on 5 stations of silicon strip detectors having a pitch of 60 microns. The total active area of each layer of the detector is about 12x10 cm2. Readout of the strips is provided through the use of VA1` ASICs mounte…
▽ More
A collaboration between Fermilab and the Institute for High Energy Physics (IHEP), Bei**g, has developed a beam position monitor for the IHEP test beam facility. This telescope is based on 5 stations of silicon strip detectors having a pitch of 60 microns. The total active area of each layer of the detector is about 12x10 cm2. Readout of the strips is provided through the use of VA1` ASICs mounted on custom hybrid printed circuit boards and interfaced to Adapter Cards via copper-over-kapton flexible circuits. The Adapter Cards amplify and level-shift the signal for input to the Fermilab CAPTAN data acquisition nodes for data readout and channel configuration. These nodes deliver readout and temperature data from triggered events to an analysis computer over gigabit Ethernet links.
△ Less
Submitted 28 October, 2010;
originally announced October 2010.
-
Search for pair production of the scalar top quark in the electron-muon final state
Authors:
V. M. Abazov,
B. Abbott,
M. Abolins,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Altona,
G. Alverson,
G. A. Alves,
L. S. Ancu,
M. Aoki,
Y. Arnoud,
M. Arov,
A. Askew,
B. Åsman,
O. Atramentov,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee
, et al. (406 additional authors not shown)
Abstract:
We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ($\tilde{t}_1$) in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider corresponding to an integrated luminosity of 5.4 fb$^{-1}$. The scalar top quarks are assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino (…
▽ More
We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ($\tilde{t}_1$) in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider corresponding to an integrated luminosity of 5.4 fb$^{-1}$. The scalar top quarks are assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino ($\tildeν$), and the search is performed in the electron plus muon final state. No significant excess of events above the standard model prediction is detected, and improved exclusion limits at the 95% C.L. are set in the the ($M_{\tilde{t}_1}$,$M_{\tildeν}$) mass plane.
△ Less
Submitted 29 September, 2010;
originally announced September 2010.
-
Determination of the width of the top quark
Authors:
V. M. Abazov,
B. Abbott,
M. Abolins,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Altona,
G. Alverson,
G. A. Alves,
L. S. Ancu,
M. Aoki,
Y. Arnoud,
M. Arov,
A. Askew,
B. Åsman,
O. Atramentov,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee
, et al. (406 additional authors not shown)
Abstract:
We extract the total width of the top quark, Gamma_t, from the partial decay width Gamma(t -> W b) measured using the t-channel cross section for single top quark production and from the branching fraction B(t -> W b) measured in ttbar events using up to 2.3 fb^-1 of integrated luminosity collected by the D0 Collaboration at the Tevatron ppbar Collider. The result is Gamma_t = 1.99 +0.69 -0.55 GeV…
▽ More
We extract the total width of the top quark, Gamma_t, from the partial decay width Gamma(t -> W b) measured using the t-channel cross section for single top quark production and from the branching fraction B(t -> W b) measured in ttbar events using up to 2.3 fb^-1 of integrated luminosity collected by the D0 Collaboration at the Tevatron ppbar Collider. The result is Gamma_t = 1.99 +0.69 -0.55 GeV, which translates to a top-quark lifetime of tau_t = (3.3 +1.3 -0.9) x 10^-25 s. Assuming a high mass fourth generation b' quark and unitarity of the four-generation quark-mixing matrix, we set the first upper limit on |Vtb'| < 0.63 at 95% C.L.
△ Less
Submitted 28 September, 2010;
originally announced September 2010.
-
The D0 Silicon Microstrip Tracker
Authors:
S. N. Ahmed,
R. Angstadt,
M. Aoki,
B. Åsman,
S. Austin,
L. Bagby,
E. Barberis,
P. Baringer,
A. Bean,
A. Bischoff,
F. Blekman,
T. A. Bolton,
C. Boswell,
M. Bowden,
F. Browning,
D. Buchholz,
S. Burdin,
D. Butler,
H. Cease,
S. Choi,
A. R. Clark,
J. Clutter,
A. Cooper,
W. E. Cooper,
M. Corcoran
, et al. (109 additional authors not shown)
Abstract:
This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided.
This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided.
△ Less
Submitted 5 May, 2010;
originally announced May 2010.
-
The Layer 0 Inner Silicon Detector of the D0 Experiment
Authors:
R. Angstadt,
L. Bagby,
A. Bean,
T. Bolton,
D. Buchholz,
D. Butler,
L. Christofek,
W. E. Cooper,
C. H. Daly,
M. Demarteau,
J. Foglesong,
C. E. Gerber,
H. Gonzalez,
J. Green,
H. Guldenman,
K. Hanagaki,
K. Herner,
J. Howell,
M. Hrycyk,
M. Johnson,
M. Kirby,
K. Krempetz,
W. Kuykendall,
F. Lehner,
R. Lipton
, et al. (24 additional authors not shown)
Abstract:
This paper describes the design, fabrication, installation and performance of the new inner layer called Layer 0 (L0) that was inserted in the existing Run IIa Silicon Micro-Strip Tracker (SMT) of the D0 experiment at the Fermilab Tevatron collider. L0 provides tracking information from two layers of sensors, which are mounted with center lines at a radial distance of 16.1 mm and 17.6 mm respect…
▽ More
This paper describes the design, fabrication, installation and performance of the new inner layer called Layer 0 (L0) that was inserted in the existing Run IIa Silicon Micro-Strip Tracker (SMT) of the D0 experiment at the Fermilab Tevatron collider. L0 provides tracking information from two layers of sensors, which are mounted with center lines at a radial distance of 16.1 mm and 17.6 mm respectively from the beam axis. The sensors and readout electronics are mounted on a specially designed and fabricated carbon fiber structure that includes cooling for sensor and readout electronics. The structure has a thin polyimide circuit bonded to it so that the circuit couples electrically to the carbon fiber allowing the support structure to be used both for detector grounding and a low impedance connection between the remotely mounted hybrids and the sensors.
△ Less
Submitted 12 November, 2009;
originally announced November 2009.
-
Vertex Detector Cable Considerations
Authors:
W. E. Cooper
Abstract:
Vertex detector cable requirements are considered within the context of the SiD concept. Cable material should be limited so that the number of radiation lengths represented is consistent with the material budget. In order to take advantage of the proposed accelerator beam structure and allow cooling by flow of dry gas, pulsed power is assumed. Potential approaches to power distribution, cable p…
▽ More
Vertex detector cable requirements are considered within the context of the SiD concept. Cable material should be limited so that the number of radiation lengths represented is consistent with the material budget. In order to take advantage of the proposed accelerator beam structure and allow cooling by flow of dry gas, pulsed power is assumed. Potential approaches to power distribution, cable paths, and cable design for operation in a 5 T magnetic field are described.
△ Less
Submitted 17 February, 2009;
originally announced February 2009.
-
Observation of the n(3He,t)p Reaction by Detection of Far-Ultraviolet Radiation
Authors:
Alan K. Thompson,
Michael A. Coplan,
John W. Cooper,
Patrick Hughes,
Robert E. Vest,
Charles W. Clark
Abstract:
We have detected Lyman alpha radiation as a product of the n(3He,t)p nuclear reaction occurring in a cell of 3He gas. The predominant source of this radiation appears to be decay of the 2p state of tritium produced by charge transfer and excitation collisions with the background 3He gas. Under the experimental conditions reported here we find yields of tens of Lyman alpha photons for every neutr…
▽ More
We have detected Lyman alpha radiation as a product of the n(3He,t)p nuclear reaction occurring in a cell of 3He gas. The predominant source of this radiation appears to be decay of the 2p state of tritium produced by charge transfer and excitation collisions with the background 3He gas. Under the experimental conditions reported here we find yields of tens of Lyman alpha photons for every neutron reaction. These results suggest a method of cold neutron detection that is complementary to existing technologies that use proportional counters. In particular, this approach may provide single neutron sensitivity with wide dynamic range capability, and a class of neutron detectors that are compact and operate at relatively low voltages.
△ Less
Submitted 16 January, 2008;
originally announced January 2008.
-
Radial position of single-site gamma-ray interactions from a parametric pulse shape analysis of germanium detector signals
Authors:
John L. Orrell,
Craig E. Aalseth,
Matthew W. Cooper,
Jeremy D. Kephart,
Carolyn E. Seifert
Abstract:
Pulse shape analysis of germanium gamma-ray spectrometer signals can yield information on the radial position of individual gamma-ray interactions within the germanium crystal. A parametric pulse shape analysis based on calculation of moments of the reconstructed current pulses from a closed-ended coaxial germanium detector is used to preferentially select single-site gamma-ray interactions. The…
▽ More
Pulse shape analysis of germanium gamma-ray spectrometer signals can yield information on the radial position of individual gamma-ray interactions within the germanium crystal. A parametric pulse shape analysis based on calculation of moments of the reconstructed current pulses from a closed-ended coaxial germanium detector is used to preferentially select single-site gamma-ray interactions. The double escape peak events from the 2614.5 keV gamma-ray of 208-Tl are used as a training set to optimize the single-site event selection region in the pulse shape parameter space. A collimated source of 320.1 keV gamma-rays from 51-Cr is used to scan different radial positions of the same semi-coaxial germanium detector. The previously trained single-site selection region is used to preferentially identify the single-site photoelectric absorption events from the 320.1 keV full-energy peak. From the identified events, a comparison of the pulse shape parameter space distributions between different scan positions allows radial interaction location information to be collected.
△ Less
Submitted 14 March, 2007;
originally announced March 2007.
-
A Re-evaluation of Shor's Algorithm
Authors:
John W. Cooper
Abstract:
Shor's algorithm is examined critically from the standpoint of it's eventual use to obtain the factors of large integers.
Shor's algorithm is examined critically from the standpoint of it's eventual use to obtain the factors of large integers.
△ Less
Submitted 11 December, 2006;
originally announced December 2006.
-
Deutsch and Jozsa's Algorithm Revisited
Authors:
John W. Cooper
Abstract:
A classical analogue of Deutsch and Jozsa's algorithm is given and its implications on quantum computing is discussed
A classical analogue of Deutsch and Jozsa's algorithm is given and its implications on quantum computing is discussed
△ Less
Submitted 27 March, 2006;
originally announced March 2006.
-
Electrical Properties of Carbon Fiber Support Systems
Authors:
W. Cooper,
C. Daly,
M. Demarteau,
J. Fast,
K. Hanagaki,
M. Johnson,
W. Kuykendall,
H. Lubatti,
M. Matulik,
A. Nomerotski,
B. Quinn,
J. Wang
Abstract:
Carbon fiber support structures have become common elements of detector designs for high energy physics experiments. Carbon fiber has many mechanical advantages but it is also characterized by high conductivity, particularly at high frequency, with associated design issues. This paper discusses the elements required for sound electrical performance of silicon detectors employing carbon fiber sup…
▽ More
Carbon fiber support structures have become common elements of detector designs for high energy physics experiments. Carbon fiber has many mechanical advantages but it is also characterized by high conductivity, particularly at high frequency, with associated design issues. This paper discusses the elements required for sound electrical performance of silicon detectors employing carbon fiber support elements. Tests on carbon fiber structures are presented indicating that carbon fiber must be regarded as a conductor for the frequency region of 10 to 100 MHz. The general principles of grounding configurations involving carbon fiber structures will be discussed. To illustrate the design requirements, measurements performed with a silicon detector on a carbon fiber support structure at small radius are presented. A grounding scheme employing copper-kapton mesh circuits is described and shown to provide adequate and robust detector performance.
△ Less
Submitted 19 April, 2005;
originally announced April 2005.
-
Half-life Limit of 19Mg
Authors:
N. Frank,
T. Baumann,
D. Bazin,
R. R. C. Clement,
M. W. Cooper,
P. Heckman,
W. A. Peters,
A. Stolz,
M. Thoennessen,
M. S. Wallace
Abstract:
A search for 19Mg was performed using projectile fragmentation of a 150 MeV/nucleon 36Ar beam. No events of 19Mg were observed. From the time-of-flight through the fragment separator an upper limit of 22 ns for the half-life of 19Mg was established.
A search for 19Mg was performed using projectile fragmentation of a 150 MeV/nucleon 36Ar beam. No events of 19Mg were observed. From the time-of-flight through the fragment separator an upper limit of 22 ns for the half-life of 19Mg was established.
△ Less
Submitted 17 October, 2003;
originally announced October 2003.
-
J/Psi Polarization in 800-GeV p-Cu Interactions
Authors:
T. H. Chang,
M. E. Beddo,
C. N. Brown,
T. A. Carey,
W. E. Cooper,
C. A. Gagliardi,
G. T. Garvey,
D. F. Geesaman,
E. A. Hawker,
X. C. He,
L. D. Isenhower,
D. M. Kaplan,
S. B. Kaufman,
D. D. Koetke,
G. S. Kyle,
P. L. McGaughey,
W. M. Lee,
M. J. Leitch,
J. M. Moss,
B. A. Mueller,
V. Papavassiliou,
J. C. Peng,
G. Petitt,
P. E. Reimer,
M. E. Sadler
, et al. (8 additional authors not shown)
Abstract:
We present measurements of the polarization of the $ J/ψ$ produced in 800-GeV proton interactions with a copper target. Polarization of the $ J/ψ$ is sensitive to the $ c \bar{c} $ production and hadronization processes. A longitudinal polarization is observed at large $ x_{F} $, while at small $ x_{F} $ the state is produced essentially unpolarized or slightly transversely polarized. No signifi…
▽ More
We present measurements of the polarization of the $ J/ψ$ produced in 800-GeV proton interactions with a copper target. Polarization of the $ J/ψ$ is sensitive to the $ c \bar{c} $ production and hadronization processes. A longitudinal polarization is observed at large $ x_{F} $, while at small $ x_{F} $ the state is produced essentially unpolarized or slightly transversely polarized. No significant variation of the polarization is observed versus $ p_{T} $.
△ Less
Submitted 31 July, 2003;
originally announced August 2003.
-
Absolute Drell-Yan Dimuon Cross Sections in 800 GeV/c pp and pd Collisions
Authors:
FNAL E866/NuSea Collaboration,
:,
J. C. Webb,
T. C. Awes,
M. L. Brooks,
C. N. Brown,
J. D. Bush,
T. A. Carey,
T. H. Chang,
W. E. Cooper,
C. A. Gagliardi,
G. T. Garvey,
D. F. Geesaman,
E. A. Hawker,
X. C. He,
L. D. Isenhower,
D. M. Kaplan,
S. B. Kaufman,
D. D. Koetke,
D. M. Lee,
W. M. Lee,
M. J. Leitch,
N. Makins,
P. L. McGaughey,
J. M. Moss
, et al. (17 additional authors not shown)
Abstract:
The Fermilab E866/NuSea Collaboration has measured the Drell-Yan dimuon cross sections in 800 GeV/$c$ $pp$ and $pd$ collisions. This represents the first measurement of the Drell-Yan cross section in $pp$ collisions over a broad kinematic region and the most extensive study to date of the Drell-Yan cross section in $pd$ collisions. The results indicate that recent global parton distribution fits…
▽ More
The Fermilab E866/NuSea Collaboration has measured the Drell-Yan dimuon cross sections in 800 GeV/$c$ $pp$ and $pd$ collisions. This represents the first measurement of the Drell-Yan cross section in $pp$ collisions over a broad kinematic region and the most extensive study to date of the Drell-Yan cross section in $pd$ collisions. The results indicate that recent global parton distribution fits provide a good description of the light antiquark sea in the nucleon over the Bjorken-$x$ range $0.03 \lesssim x < 0.15$, but overestimate the valence quark distributions as $x \to 1$.
△ Less
Submitted 14 February, 2003;
originally announced February 2003.
-
Observation of Polarization in Bottomonium Production at sqrt(s)=38.8 GeV
Authors:
C. N. Brown,
T. C. Awes,
M. E. Beddo,
M. L. Brooks,
J. D. Bush,
T. A. Carey,
T. H. Chang,
W. E. Cooper,
C. A. Gagliardi,
G. T. Garvey,
D. F. Geesaman,
E. A. Hawker,
X. C. He,
L. D. Isenhower,
D. M. Kaplan,
S. B. Kaufman,
D. D. Koetke,
G. Kyle,
W. M. Lee,
M. J. Leitch,
N. Makins,
P. L. McGaughey,
J. M. Moss,
B. A. Mueller,
P. M. Nord
, et al. (12 additional authors not shown)
Abstract:
We present a measurement of the polarization observed for bottomonium states produced in p-Cu collisions at sqrt(s)=38.8 GeV. The angular distribution of the decay dimuons of the Upsilon(1S) state show no polarization at small xF and pT but significant positive transverse production polarization for either pT > 1.8 GeV/c or for xF > 0.35. The Upsilon(2S+3S) unresolved states show a large transve…
▽ More
We present a measurement of the polarization observed for bottomonium states produced in p-Cu collisions at sqrt(s)=38.8 GeV. The angular distribution of the decay dimuons of the Upsilon(1S) state show no polarization at small xF and pT but significant positive transverse production polarization for either pT > 1.8 GeV/c or for xF > 0.35. The Upsilon(2S+3S) unresolved states show a large transverse production polarization at all values of xF and pT measured. These observations are compared with an NRQCD calculation that predicts a transverse polarization in bottomonium production arising from quark-antiquark fusion and gluon-gluon fusion diagrams.
△ Less
Submitted 9 November, 2000;
originally announced November 2000.
-
Energy loss of fast quarks in nuclei
Authors:
M. B. Johnson,
B. Z. Kopeliovich,
I. K. Potashnikova,
P. L. McGaughey,
J. M. Moss,
J. C. Peng,
G. T. Garvey,
M. J. Leitch,
M. R. Adams,
D. M. Alde,
H. W. Baer,
M. L. Barlett,
C. N. Brown,
W. E. Cooper,
T. A. Carey,
G. Danner,
G. W. Hoffmann,
Y. B. Hsiung,
D. M. Kaplan,
A. Klein,
C. Lee,
J. W. Lillberg,
R. L. McCarthy,
C. S. Mishra,
M. J. Wang
Abstract:
We report an analysis of the nuclear dependence of the yield of Drell-Yan dimuons from the 800 GeV/c proton bombardment of $^2H$, C, Ca, Fe, and W targets. Employing a new formulation of the Drell-Yan process in the rest frame of the nucleus, this analysis examines the effect of initial-state energy loss and shadowing on the nuclear-dependence ratios versus the incident proton's momentum fractio…
▽ More
We report an analysis of the nuclear dependence of the yield of Drell-Yan dimuons from the 800 GeV/c proton bombardment of $^2H$, C, Ca, Fe, and W targets. Employing a new formulation of the Drell-Yan process in the rest frame of the nucleus, this analysis examines the effect of initial-state energy loss and shadowing on the nuclear-dependence ratios versus the incident proton's momentum fraction and dimuon effective mass. The resulting energy loss per unit path length is $-dE/dz = 2.32 \pm 0.52\pm 0.5$ GeV/fm. This is the first observation of a nonzero energy loss of partons traveling in nuclear environment.
△ Less
Submitted 19 October, 2000;
originally announced October 2000.
-
Measurement of Differences Between J/Psi and Psi' Suppression in p-A Collisions
Authors:
M. J. Leitch,
W. M. Lee,
M. E. Beddo,
C. N. Brown,
T. A. Carey,
T. H. Chang,
W. E. Cooper,
C. A. Gagliardi,
G. T. Garvey,
D. F. Geesaman,
E. A. Hawker,
X. C. He,
L. D. Isenhower,
D. M. Kaplan,
S. B. Kaufman,
D. D. Koetke,
P. L. McGaughey,
J. M. Moss,
B. A. Mueller,
V. Papavassiliou,
J. C. Peng,
G. Petitt,
P. E. Reimer,
M. E. Sadler,
W. E. Sondheim
, et al. (7 additional authors not shown)
Abstract:
Measurements of the suppression of the yield per nucleon of J/Psi and Psi' production for 800 GeV/c protons incident on heavy relative to light nuclear targets have been made with very broad coverage in xF and pT. The observed suppression is smallest at xF values of 0.25 and below and increases at larger values of xF. It is also strongest at small pT. Substantial differences between the Psi' and…
▽ More
Measurements of the suppression of the yield per nucleon of J/Psi and Psi' production for 800 GeV/c protons incident on heavy relative to light nuclear targets have been made with very broad coverage in xF and pT. The observed suppression is smallest at xF values of 0.25 and below and increases at larger values of xF. It is also strongest at small pT. Substantial differences between the Psi' and J/Psi are observed for the first time in p-A collisions. The suppression for the Psi' is stronger than that for the J/Psi for xF near zero, but becomes comparable to that for the J/Psi for xF > 0.6.
△ Less
Submitted 9 March, 2000; v1 submitted 14 September, 1999;
originally announced September 1999.
-
Search for flavor-changing neutral currents and lepton-family-number violation in two-body D0 decays
Authors:
D. Pripstein,
C. N. Brown,
T. A. Carey,
Y. C. Chen,
R. L. Childers,
W. E. Cooper,
C. W. Darden,
G. Gidal,
K. N. Gounder,
P. M. Ho,
L. D. Isenhower,
D. M. Jansen,
R. G. Jeppesen,
D. M. Kaplan,
J. S. Kapustinsky,
G. C. Kiang,
M. S. Kowitt,
D. W. Lane,
L. M. Lederman,
M. J. Leitch,
J. W. Lillberg,
W. R. Luebke,
K. B. Luk,
P. L. McGaughey,
C. S. Mishra
, et al. (10 additional authors not shown)
Abstract:
Results of a search for the three neutral charm decays, D0 -> mu e, D0 -> mu mu, and D0 -> e e, are presented. This study was based on data collected in Experiment 789 at the Fermi National Accelerator Laboratory using 800 GeV/c proton-Au and proton-Be interactions. No evidence is found for any of the decays. Upper limits on the branching ratios, at the 90% confidence level, are obtained.
Results of a search for the three neutral charm decays, D0 -> mu e, D0 -> mu mu, and D0 -> e e, are presented. This study was based on data collected in Experiment 789 at the Fermi National Accelerator Laboratory using 800 GeV/c proton-Au and proton-Be interactions. No evidence is found for any of the decays. Upper limits on the branching ratios, at the 90% confidence level, are obtained.
△ Less
Submitted 5 October, 1999; v1 submitted 11 June, 1999;
originally announced June 1999.
-
Parton energy loss limits and shadowing in Drell-Yan dimuon production
Authors:
M. A. Vasiliev,
M. E. Beddo,
C. N. Brown,
T. A. Carey,
T. H. Chang,
W. E. Cooper,
C. A. Gagliardi,
G. T. Garvey,
D. F. Geesaman,
E. A. Hawker,
X. C. He,
L. D. Isenhower,
D. M. Kaplan,
S. B. Kaufman,
D. D. Koetke,
W. M. Lee,
M. J. Leitch,
P. L. McGaughey,
J. M. Moss,
B. A. Mueller,
V. Papavassiliou,
J. C. Peng,
G. Petitt,
P. E. Reimer,
M. E. Sadler
, et al. (7 additional authors not shown)
Abstract:
A precise measurement of the ratios of the Drell-Yan cross section per nucleon for an 800 GeV/c proton beam incident on Be, Fe and W targets is reported. The behavior of the Drell-Yan ratios at small target parton momentum fraction is well described by an existing fit to the shadowing observed in deep-inelastic scattering. The cross section ratios as a function of the incident parton momentum fr…
▽ More
A precise measurement of the ratios of the Drell-Yan cross section per nucleon for an 800 GeV/c proton beam incident on Be, Fe and W targets is reported. The behavior of the Drell-Yan ratios at small target parton momentum fraction is well described by an existing fit to the shadowing observed in deep-inelastic scattering. The cross section ratios as a function of the incident parton momentum fraction set tight limits on the energy loss of quarks passing through a cold nucleus.
△ Less
Submitted 4 June, 1999;
originally announced June 1999.
-
Velocity statistics in excited granular media
Authors:
W. Losert,
D. G. W. Cooper,
J. Delour,
A. Kudrolli,
J. P. Gollub
Abstract:
We present an experimental study of velocity statistics for a partial layer of inelastic colliding beads driven by a vertically oscillating boundary. Over a wide range of parameters (accelerations 3-8 times the gravitational acceleration), the probability distribution P(v) deviates measurably from a Gaussian for the two horizontal velocity components. It can be described by P(v) ~ exp(-|v/v_c|^1…
▽ More
We present an experimental study of velocity statistics for a partial layer of inelastic colliding beads driven by a vertically oscillating boundary. Over a wide range of parameters (accelerations 3-8 times the gravitational acceleration), the probability distribution P(v) deviates measurably from a Gaussian for the two horizontal velocity components. It can be described by P(v) ~ exp(-|v/v_c|^1.5), in agreement with a recent theory. The characteristic velocity v_c is proportional to the peak velocity of the boundary. The granular temperature, defined as the mean square particle velocity, varies with particle density and exhibits a maximum at intermediate densities. On the other hand, for free cooling in the absence of excitation, we find an exponential velocity distribution. Finally, we examine the sharing of energy between particles of different mass. The more massive particles are found to have greater kinetic energy.
△ Less
Submitted 29 June, 1999; v1 submitted 20 January, 1999;
originally announced January 1999.
-
Propagating front in an excited granular layer
Authors:
W. Losert,
D. G. W. Cooper,
J. P. Gollub
Abstract:
A partial monolayer of ~ 20000 uniform spherical steel beads, vibrated vertically on a flat plate, shows remarkable ordering transitions and cooperative behavior just below 1g maximum acceleration. We study the stability of a quiescent disordered or ``amorphous'' state formed when the acceleration is switched off in the excited ``gaseous'' state. The transition from the amorphous state back to t…
▽ More
A partial monolayer of ~ 20000 uniform spherical steel beads, vibrated vertically on a flat plate, shows remarkable ordering transitions and cooperative behavior just below 1g maximum acceleration. We study the stability of a quiescent disordered or ``amorphous'' state formed when the acceleration is switched off in the excited ``gaseous'' state. The transition from the amorphous state back to the gaseous state upon increasing the plate's acceleration is generally subcritical: An external perturbation applied to one bead initiates a propagating front that produces a rapid transition. We measure the front velocity as a function of the applied acceleration. This phenomenon is explained by a model based on a single vibrated particle with multiple attractors that is perturbed by collisions. A simulation shows that a sufficiently high rate of interparticle collisions can prevent trap** in the attractor corresponding to the nonmoving ground state.
△ Less
Submitted 5 April, 1999; v1 submitted 5 December, 1998;
originally announced December 1998.
-
dbar/ubar Asymmetry and the Origin of the Nucleon Sea
Authors:
J. C. Peng,
G. T. Garvey,
T. C. Awes,
M. E. Beddo,
M. L. Brooks,
C. N. Brown,
J. D. Bush,
T. A. Carey,
T. H. Chang,
W. E. Cooper,
C. A. Gagliardi,
D. F. Geesaman,
E. A. Hawker,
X. C. He,
L. D. Isenhower,
S. B. Kaufman,
D. M. Kaplan,
P. N. Kirk,
D. D. Koetke,
G. Kyle,
D. M. Lee,
W. M. Lee,
M. J. Leitch,
N. Makins,
P. L. McGaughey
, et al. (21 additional authors not shown)
Abstract:
The Drell-Yan cross section ratios, $σ(p+d)/σ(p+p)$, measured in Fermilab E866, have led to the first determination of $\bar d(x) / \bar u(x)$, $\bar d(x) - \bar u(x)$, and the integral of $\bar d(x) - \bar u(x)$ for the proton over the range $0.02 \le x \le 0.345$. The E866 results are compared with predictions based on parton distribution functions and various theoretical models. The relations…
▽ More
The Drell-Yan cross section ratios, $σ(p+d)/σ(p+p)$, measured in Fermilab E866, have led to the first determination of $\bar d(x) / \bar u(x)$, $\bar d(x) - \bar u(x)$, and the integral of $\bar d(x) - \bar u(x)$ for the proton over the range $0.02 \le x \le 0.345$. The E866 results are compared with predictions based on parton distribution functions and various theoretical models. The relationship between the E866 results and the NMC measurement of the Gottfried integral is discussed. The agreement between the E866 results and models employing virtual mesons indicates these non-perturbative processes play an important role in the origin of the $\bar d$, $\bar u$ asymmetry in the nucleon sea.
△ Less
Submitted 14 April, 1998;
originally announced April 1998.
-
Measurement of the Light Antiquark Flavor Asymmetry in the Nucleon Sea
Authors:
E. A. Hawker,
T. C. Awes,
M. E. Beddo,
C. N. Brown,
J. D. Bush,
T. A. Carey,
T. H. Chang,
W. E. Cooper,
C. A. Gagliardi,
G. T. Garvey,
D. F. Geesaman,
X. C. He,
L. D. Isenhower,
S. B. Kaufman,
D. M. Kaplan,
P. N. Kirk,
D. D. Koetke,
G. Kyle,
D. M. Lee,
W. M. Lee,
M. J. Leitch,
N. Makins,
P. L. McGaughey,
J. M. Moss,
B. A. Mueller
, et al. (20 additional authors not shown)
Abstract:
A precise measurement of the ratio of Drell-Yan yields from an 800 GeV/c proton beam incident on hydrogen and deuterium targets is reported. Over 140,000 Drell-Yan muon pairs with dimuon mass M_{mu+ mu-} >= 4.5 GeV/c^2 were recorded. From these data, the ratio of anti-down (dbar) to anti-up (ubar) quark distributions in the proton sea is determined over a wide range in Bjorken-x. A strong x depe…
▽ More
A precise measurement of the ratio of Drell-Yan yields from an 800 GeV/c proton beam incident on hydrogen and deuterium targets is reported. Over 140,000 Drell-Yan muon pairs with dimuon mass M_{mu+ mu-} >= 4.5 GeV/c^2 were recorded. From these data, the ratio of anti-down (dbar) to anti-up (ubar) quark distributions in the proton sea is determined over a wide range in Bjorken-x. A strong x dependence is observed in the ratio dbar/ubar, showing substantial enhancement of dbar with respect to ubar for x<0.2. This result is in fair agreement with recent parton distribution parameterizations of the sea. For x>0.2, the observed dbar/ubar ratio is much nearer unity than given by the parameterizations.
△ Less
Submitted 12 March, 1998;
originally announced March 1998.