-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
Giant two-phonon Raman scattering from nanoscale NbC precipitates in Nb
Authors:
C. Cao,
R. Tao,
D. C. Ford,
R. F. Klie,
T. Proslier,
L. D. Cooley,
A. Dzyuba,
P. Zapol,
M. Warren,
H. Lind,
J. F. Zasadzinski
Abstract:
High purity niobium (Nb), subjected to the processing methods used in the fabrication of superconducting RF cavities, displays micron-sized surface patches containing excess carbon. High-resolution transmission electron microscopy and electron energy-loss spectroscopy measurements are presented which reveal the presence of nanoscale NbC coherent precipitates in such regions. Raman backscatter spec…
▽ More
High purity niobium (Nb), subjected to the processing methods used in the fabrication of superconducting RF cavities, displays micron-sized surface patches containing excess carbon. High-resolution transmission electron microscopy and electron energy-loss spectroscopy measurements are presented which reveal the presence of nanoscale NbC coherent precipitates in such regions. Raman backscatter spectroscopy on similar surface regions exhibit spectra consistent with the literature results on bulk NbC but with significantly enhanced two-phonon scattering. The unprecedented strength and sharpness of the two-phonon signal has prompted a theoretical analysis, using density functional theory (DFT), of phonon modes in NbC for two different interface models of the coherent precipitate. One model leads to overall compressive strain and a comparison to ab-initio calculations of phonon dispersion curves under uniform compression of the NbC shows that the measured two-phonon peaks are linked directly to phonon anomalies arising from strong electron-phonon interaction. Another model of the extended interface between Nb and NbC, studied by DFT, gives insight into the frequency shifts of the acoustic and optical mode density of states measured by first order Raman. The exact origin of the stronger two-phonon response is not known at present but it suggests the possibility of enhanced electron-phonon coupling in transition metal carbides under strain found either in the bulk NbC inclusions or at their interfaces with Nb metal. Preliminary tunneling studies using a point contact method show some energy gaps larger than expected for bulk NbC.
△ Less
Submitted 9 March, 2015;
originally announced March 2015.
-
Fermilab experience of post-annealing losses in SRF niobium cavities due to furnace contamination and the ways to its mitigation: a pathway to processing simplification and quality factor improvement
Authors:
A. Grassellino,
A. Romanenko,
A. Crawford,
O. Melnychuk,
A. Rowe,
M. Wong,
C. Cooper,
D. Sergatskov,
D. Bice,
Y. Trenikhina,
L. D. Cooley,
C. Ginsburg,
R. D. Kephart
Abstract:
We investigate the effect of high temperature treatments followed by only high-pressure water rinse (HPR) of superconducting radio frequency (SRF) niobium cavities. The objective is to provide a cost effective alternative to the typical cavity processing sequence, by eliminating the material removal step post furnace treatment while preserving or improving the RF performance. The studies have been…
▽ More
We investigate the effect of high temperature treatments followed by only high-pressure water rinse (HPR) of superconducting radio frequency (SRF) niobium cavities. The objective is to provide a cost effective alternative to the typical cavity processing sequence, by eliminating the material removal step post furnace treatment while preserving or improving the RF performance. The studies have been conducted in the temperature range 800-1000C for different conditions of the starting substrate: large grain and fine grain, electro-polished (EP) and centrifugal barrel polished (CBP) to mirror finish. An interesting effect of the grain size on the performances is found. Cavity results and samples characterization show that furnace contaminants cause poor cavity performance, and a practical solution is found to prevent surface contamination. Extraordinary values of residual resistances ~ 1 nOhm and below are then consistently achieved for the contamination-free cavities. These results lead to a more cost-effective processing and improved RF performance, and, in conjunction with CBP, open a potential pathway to acid-free processing.
△ Less
Submitted 16 May, 2013; v1 submitted 9 May, 2013;
originally announced May 2013.
-
Proximity breakdown of hydrides in superconducting niobium cavities
Authors:
A. Romanenko,
F. Barkov,
L. D. Cooley,
A. Grassellino
Abstract:
Many modern and proposed future particle accelerators rely on superconducting radio frequency cavities made of bulk niobium as primary particle accelerating structures. Such cavities suffer from the anomalous field dependence of their quality factors Q0. High field degradation - so-called high field Q-slope - is yet unexplained even though an empirical cure is known. Here we propose a mechanism ba…
▽ More
Many modern and proposed future particle accelerators rely on superconducting radio frequency cavities made of bulk niobium as primary particle accelerating structures. Such cavities suffer from the anomalous field dependence of their quality factors Q0. High field degradation - so-called high field Q-slope - is yet unexplained even though an empirical cure is known. Here we propose a mechanism based on the presence of proximity-coupled niobium hydrides, which can explain this effect. Furthermore, the same mechanism can be present in any surface-sensitive experiments or superconducting devices involving niobium.
△ Less
Submitted 13 January, 2013; v1 submitted 13 December, 2012;
originally announced December 2012.
-
Model for initiation of quality factor degradation at high accelerating fields in superconducting radio-frequency cavities
Authors:
A Dzyuba,
A Romanenko,
L D Cooley
Abstract:
A model for the onset of the reduction in SRF cavity quality factor, the so-called Q-drop, at high accelerating electric fields is presented. Breakdown of the surface barrier against magnetic flux penetration at the cavity equator is considered to be the critical event that determines the onset of Q-drop. The worst case of triangular grooves with low field of first flux penetration Hp, as analyzed…
▽ More
A model for the onset of the reduction in SRF cavity quality factor, the so-called Q-drop, at high accelerating electric fields is presented. Breakdown of the surface barrier against magnetic flux penetration at the cavity equator is considered to be the critical event that determines the onset of Q-drop. The worst case of triangular grooves with low field of first flux penetration Hp, as analyzed previously by Buzdin and Daumens, [1998 Physica C 294: 257], was adapted. This approach incorporates both the geometry of the groove and local contamination via the Ginzburg-Landau parameter kappa, so the proposed model allows new comparisons of one effect in relation to the other. The model predicts equivalent reduction of Hp when either roughness or contamination were varied alone, so smooth but dirty surfaces limit cavity performance about as much as rough but clean surfaces do. When in combination, contamination exacerbates the negative effects of roughness and vice-versa. To test the model with actual data, coupons were prepared by buffered chemical polishing and electropolishing, and stylus profilometry was used to obtain distributions of angles. From these data, curves for surface resistance generated by simple flux flow as a function of magnetic field were generated by integrating over the distribution of angles for reasonable values of kappa. This showed that combined effects of roughness and contamination indeed reduce the Q-drop onset field by ~30%, and that that contamination contributes to Q-drop as much as roughness. The latter point may be overlooked by SRF cavity research, since access to the cavity interior by spectroscopy tools is very difficult, whereas optical images have become commonplace. The model was extended to fit cavity test data, which indicated that reduction of the superconducting gap by contaminants may also play a role in Q-drop.
△ Less
Submitted 15 July, 2010;
originally announced July 2010.
-
Enhancement of the upper critical field of Nb3Sn utilizing disorder introduced by ball milling the elements
Authors:
L. D. Cooley,
Y. F. Hu,
A. R Moodenbaugh
Abstract:
Nb3Sn was prepared by milling Nb and Sn powder mixtures followed by limited reactions to restrict disorder recovery. Although disorder reduced the superconducting critical temperature Tc, the concomitant electron scattering increased the upper critical field mu0Hc2 to as high as 35 T at 0 K, as determined by the Werthamer-Helfand-Hohenberg equation. Hc2 was higher for longer milling times and lo…
▽ More
Nb3Sn was prepared by milling Nb and Sn powder mixtures followed by limited reactions to restrict disorder recovery. Although disorder reduced the superconducting critical temperature Tc, the concomitant electron scattering increased the upper critical field mu0Hc2 to as high as 35 T at 0 K, as determined by the Werthamer-Helfand-Hohenberg equation. Hc2 was higher for longer milling times and lower annealing temperatures. Substitution of 2% Ti for Nb did not appreciably enhance Hc2, suggesting that alloying mitigates the benefits of disorder. Since alloyed Nb3Sn wires have mu0Hc2(0) approximately 29 T, wires based on heavily milled powders could extend the field range for applications if they can be made with high current density.
△ Less
Submitted 23 November, 2005;
originally announced November 2005.
-
Electron energy-loss spectroscopy study of electron-do** in MgB$_2$
Authors:
R. F. Klie,
J. C. Zheng,
Y. Zhu,
A. J. Zambano,
L. D. Cooley
Abstract:
The electronic structure of electron-doped polycrystalline Mg$_{1-x}$Al$_{x}$(B$_{1-y}$C$_{y}$)$_2$ was examined by electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) and first-principle electronic structure calculations. We found significant changes in the boron $K$ edge fine structure, suggesting the two bands of the B $K$ edge, the $σ$ and the $π$ b…
▽ More
The electronic structure of electron-doped polycrystalline Mg$_{1-x}$Al$_{x}$(B$_{1-y}$C$_{y}$)$_2$ was examined by electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) and first-principle electronic structure calculations. We found significant changes in the boron $K$ edge fine structure, suggesting the two bands of the B $K$ edge, the $σ$ and the $π$ band are being simultaneously filled as the electron do** concentration of Mg$_{1-x}$Al$_{x}$(B$_{1-y}$C$_{y}$)$_2$ was increased. Our density-functional theory calculations confirm the filling of the $σ$ band states close to the Fermi level, which is believed to cause the loss of superconductivity in highly doped MgB$_2$, since the electron-phonon coupling of these states is thought to be responsible for the high superconducting transition temperature. Our results do not show significant differences in the electronic structure for electron do** on either the Mg or the B site, although many superconducting properties, such as $T_c$ or H$_{c_2}$ differ considerably for C- and Al- doped \MB. This behavior can not be satisfactorily explained by band filling alone, and effects such as interband scattering are considered.
△ Less
Submitted 30 September, 2005;
originally announced October 2005.
-
Composition gradients and their effects on superconductivity in Al-doped MgB2
Authors:
A. J. Zambano,
A. R. Moodenbaugh,
L. D. Cooley
Abstract:
(Abridged abstract) Alloyed MgB2 differs from pure forms in that diffusion is needed to distribute the alloying elements homogeneously. Williamson-Hall analyses of x-ray diffraction peaks showed that Mg1-xAlxB2 samples made by a typical reaction A had higher crystalline strain than when thoroughly annealed by reaction B. The strain and other analyses indicate that reaction A produced substantial…
▽ More
(Abridged abstract) Alloyed MgB2 differs from pure forms in that diffusion is needed to distribute the alloying elements homogeneously. Williamson-Hall analyses of x-ray diffraction peaks showed that Mg1-xAlxB2 samples made by a typical reaction A had higher crystalline strain than when thoroughly annealed by reaction B. The strain and other analyses indicate that reaction A produced substantial Al gradients across the individual grains while reaction B did not. The gredients skew the apparent superconducting behavior: properties appeared to be distinct when plotted vs. x (e.g. two Tc(x) curves), but all of the data merged when analyzed in terms of the unit cell volume v (e.g. one Tc(v) curve). Since v is derived from x-ray diffraction, it captures the average Al content actually present inside the grains and better reflects the behavior intrinsic to the addition of Al. These analyses show that it is important to coordinate structural and property characterizations to remove artifacts of composition gradients and uncover the intrinsic trends. Because the standard characterizations of the superconducting properties above gave no clear indication that the two sample sets had different homogeneity, the structural information was vital to make a correct assessment of the effects of Al do** on superconductivity.
△ Less
Submitted 1 July, 2005;
originally announced July 2005.
-
Inversion of two-band superconductivity at the critical electron do** of (Mg,Al)B$_2$
Authors:
L. D. Cooley,
A. J. Zambano,
A. R. Moodenbaugh,
R. F. Klie,
**-Cheng Zheng,
Yimei Zhu
Abstract:
Electron energy-loss spectroscopy (EELS) was combined with heat capacity measurements to follow the change of superconductivity with systematic Al do** of MgB$_2$. By using x-ray diffraction and Vegard's law to assess the actual Al content in the samples, changes in behavior were found to be much more in agreement with theoretical predictions than in earlier studies. EELS data show that $σ$-ba…
▽ More
Electron energy-loss spectroscopy (EELS) was combined with heat capacity measurements to follow the change of superconductivity with systematic Al do** of MgB$_2$. By using x-ray diffraction and Vegard's law to assess the actual Al content in the samples, changes in behavior were found to be much more in agreement with theoretical predictions than in earlier studies. EELS data show that $σ$-band hole states disappear above 33% Al, approximately the composition at which the $σ$ band Fermi surface is predicted to lose its cylindrical shape in reciprocal space and break apart into ellipsoidal pockets. At this composition, the $σ$ gap obtained from the heat capacity data falls to the level of the $π$ gap, implying that band filling results in the loss of strong superconductivity on the $σ$ band. However, superconductivity is not quenched completely, but persists with $T_c < 7$ K up to about 55% Al, the Al concentration at which the entire $σ$ band is predicted to fall below the Fermi surface. Since, in the region $0.33 \alt x \alt 0.55$, only the $π$ band has appreciable density of states, it becomes the stronger of the 2 bands, thus inverting the 2-band hierarchy of MgB$_2$.
△ Less
Submitted 18 April, 2005;
originally announced April 2005.
-
Formation of MgB2 at low temperatures by reaction of Mg with B6Si
Authors:
L. D. Cooley,
Kyongha Kang,
R. Klie,
Q. Li,
A. Moodenbaugh,
R. Sabatini
Abstract:
Formation of MgB2 by reactions of Mg with B6Si and Mg with B were compared, the former also producing Mg2Si as a major product. Compared to the binary system, the ternary reactions for identical time and temperature were more complete at 750 C and below, as indicated by higher diamagnetic shielding and larger x-ray diffraction peak intensities relative to those of Mg. MgB2 could be produced at t…
▽ More
Formation of MgB2 by reactions of Mg with B6Si and Mg with B were compared, the former also producing Mg2Si as a major product. Compared to the binary system, the ternary reactions for identical time and temperature were more complete at 750 C and below, as indicated by higher diamagnetic shielding and larger x-ray diffraction peak intensities relative to those of Mg. MgB2 could be produced at temperatures as low as 450 C by the ternary reaction. Analyses by electron microscopy, x-ray diffraction, and of the upper critical field show that Si does not enter the MgB2 phase.
△ Less
Submitted 3 March, 2004;
originally announced March 2004.
-
Simulations of the effects of tin composition gradients on the superconducting properties of Nb3Sn conductors
Authors:
L. D. Cooley,
C. M. Fischer,
P. J. Lee,
D. C. Larbalestier
Abstract:
In powder-in-tube (PIT) Nb3Sn composites, the A15 phase forms between a central tin-rich core and a coaxial Nb tube, thus causing the tin content and superconducting properties to vary with radius across the A15 layer. Since this geometry is also ideal for magnetic characterization of the superconducting properties with the field parallel to the tube axis, a system of concentric shells with vary…
▽ More
In powder-in-tube (PIT) Nb3Sn composites, the A15 phase forms between a central tin-rich core and a coaxial Nb tube, thus causing the tin content and superconducting properties to vary with radius across the A15 layer. Since this geometry is also ideal for magnetic characterization of the superconducting properties with the field parallel to the tube axis, a system of concentric shells with varying tin content was used to simulate the superconducting properties, the overall severity of the Sn composition gradient being defined by an index N. Using well-known scaling relationships and property trends developed in an earlier experimental study, the critical current density for each shell was calculated, and from this the magnetic moment of each shell was found. By summing these moments, experimentally measured properties such as pinning-force curves and Kramer plots could be simulated. We found that different tin profiles have only a minor effect on the shape of Kramer plots, but a pronounced effect on the irreversibility fields defined by the extrapolation of Kramer plots. In fact, these extrapolated values H_K are very close to a weighted average of the superconducting properties across the layer for all N. The difference between H_K and the upper critical field commonly seen in experiments is a direct consequence of the different ways measurements probe the simulated Sn gradients. Sn gradients were found to be significantly deleterious to the critical current density Jc, since reductions to both the elementary pinning force and the flux pinning scaling field H_K compound the reduction in Jc. The simulations show that significant gains in Jc of Nb3Sn strands might be realized by circumventing strong compositional gradients of tin.
△ Less
Submitted 6 February, 2004;
originally announced February 2004.
-
Very high upper critical fields in MgB2 produced by selective tuning of impurity scattering
Authors:
A. Gurevich,
S. Patnaik,
V. Braccini,
K. H. Kim,
C. Mielke,
X. Song,
L. D. Cooley,
S. D. Bu,
D. M. Kim,
J. H. Choi,
L. J. Belenky,
J. Giencke,
M. K. Lee,
W. Tian,
X. Q. Pan,
A. Siri,
E. E. Hellstrom,
C. B. Eom,
D. C. Larbalestier
Abstract:
We report a significant enhancement of the upper critical field $H_{c2}$ of different $MgB_2$ samples alloyed with nonmagnetic impurities. By studying films and bulk polycrystals with different resistivities $ρ$, we show a clear trend of $H_{c2}$ increase as $ρ$ increases. One particular high resistivity film had zero-temperature $H_{c2}(0)$ well above the $H_{c2}$ values of competing non-cuprat…
▽ More
We report a significant enhancement of the upper critical field $H_{c2}$ of different $MgB_2$ samples alloyed with nonmagnetic impurities. By studying films and bulk polycrystals with different resistivities $ρ$, we show a clear trend of $H_{c2}$ increase as $ρ$ increases. One particular high resistivity film had zero-temperature $H_{c2}(0)$ well above the $H_{c2}$ values of competing non-cuprate superconductors such as $Nb_3Sn$ and Nb-Ti. Our high-field transport measurements give record values $H_{c2}^\perp (0) \approx 34T$ and $H_{c2}\|(0) \approx 49 T$ for high resistivity films and $H_{c2}(0)\approx 29 T$ for untextured bulk polycrystals. The highest $H_{c2}$ film also exhibits a significant upward curvature of $H_{c2}(T)$, and temperature dependence of the anisotropy parameter $γ(T) = H_{c2}\|/ H_{c2}^\perp$ opposite to that of single crystals: $γ(T)$ decreases as the temperature decreases, from $γ(T_c) \approx 2$ to $γ(0) \approx 1.5$. This remarkable $H_{c2}$ enhancement and its anomalous temperature dependence are a consequence of the two-gap superconductivity in $MgB_2$, which offers special opportunities for further $H_{c2}$ increase by tuning of the impurity scattering by selective alloying on Mg and B sites. Our experimental results can be explained by a theory of two-gap superconductivity in the dirty limit. The very high values of $H_{c2}(T)$ observed suggest that $MgB_2$ can be made into a versatile, competitive high-field superconductor.
△ Less
Submitted 17 September, 2003; v1 submitted 20 May, 2003;
originally announced May 2003.
-
Significant enhancement of irreversibility field in clean-limit bulk MgB2
Authors:
V. Braccini,
L. D. Cooley,
S. Patnaik,
P. Manfrinetti,
A. Palenzona,
A. S. Siri,
D. C. Larbalestier
Abstract:
Low resistivity ("clean") MgB2 bulk samples annealed in Mg vapor show an increase in upper critical field Hc2(T) and irreversibility field Hirr(T) by a factor of 2 in both transport and magnetic measurements. The best sample displayed Hirr above 14 T at 4.2 K and 6 T at 20 K. These changes were accompanied by an increase of the 40 K resistivity from 1.0 to 18 microohm-cm and a lowering of the re…
▽ More
Low resistivity ("clean") MgB2 bulk samples annealed in Mg vapor show an increase in upper critical field Hc2(T) and irreversibility field Hirr(T) by a factor of 2 in both transport and magnetic measurements. The best sample displayed Hirr above 14 T at 4.2 K and 6 T at 20 K. These changes were accompanied by an increase of the 40 K resistivity from 1.0 to 18 microohm-cm and a lowering of the resistivity ratio from 15 to 3, while the critical temperature Tc decreased by only 1-2 K. These results point the way to make prepare MgB2 attractive for magnet applications.
△ Less
Submitted 12 August, 2002; v1 submitted 3 August, 2002;
originally announced August 2002.
-
High Critical Current Density and Improved Irreversibility Field in Bulk MgB2 Made By A Scaleable, Nanoparticle Addition Route
Authors:
J. Wang,
Y. Bugoslavsky,
A. Berenov,
L. Cowey,
A. D. Caplin,
L. F. Cohen,
J. L. MacManus Driscoll,
L. D. Cooley,
X. Song,
D. C. Larbalestier
Abstract:
Bulk samples of MgB2 were prepared with 5, 10, and 15% wt.% Y2O3 nanoparticles added using a simple solid-state reaction route. Transmission electron microscopy (TEM) showed a fine nanostructure consisting of ~3-5 nm YB4 nanoparticles embedded within MgB2 grains of ~400 nm size. Compared to an undoped control sample, an improvement in the in-field critical current density Jc was observed, most n…
▽ More
Bulk samples of MgB2 were prepared with 5, 10, and 15% wt.% Y2O3 nanoparticles added using a simple solid-state reaction route. Transmission electron microscopy (TEM) showed a fine nanostructure consisting of ~3-5 nm YB4 nanoparticles embedded within MgB2 grains of ~400 nm size. Compared to an undoped control sample, an improvement in the in-field critical current density Jc was observed, most notably for 10% do**. At 4.2K, the lower bound Jc value was ~2x105A.cm-2 at 2T. At 20K, the corresponding value was ~8x104A.cm-2. Irreversibility fields were ~11.5 T at 4.2K and 5.5T at 20K, compared to ~4T and ~8T, respectively, for high-pressure synthesized bulk samples.
△ Less
Submitted 22 April, 2002;
originally announced April 2002.
-
Core pinning by intragranular nanoprecipitates in polycrystalline MgCNi_3
Authors:
L. D. Cooley,
X. Song,
J. Jiang,
D. C. Larbalestier,
T. He,
K. A. Regan,
R. J. Cava
Abstract:
The nanostructure and magnetic properties of polycrystalline MgCNi_3 were studied by x-ray diffraction, electron microscopy, and vibrating sample magnetometry. While the bulk flux-pinning force curve F_p(H) indicates the expected grain-boundary pinning mechanism just below T_c = 7.2 K, a systematic change to pinning by a nanometer-scale distribution of core pinning sites is indicated by a shift…
▽ More
The nanostructure and magnetic properties of polycrystalline MgCNi_3 were studied by x-ray diffraction, electron microscopy, and vibrating sample magnetometry. While the bulk flux-pinning force curve F_p(H) indicates the expected grain-boundary pinning mechanism just below T_c = 7.2 K, a systematic change to pinning by a nanometer-scale distribution of core pinning sites is indicated by a shift of F_p(H) with decreasing temperature. The lack of scaling of F_p(H) suggests the presence of 10 to 20% of nonsuperconducting regions inside the grains, which are smaller than the diameter of fluxon cores 2xi at high temperature and become effective with decreasing temperature when xi(T) approaches the nanostructural scale. Transmission electron microscopy revealed cubic and graphite nanoprecipitates with 2 to 5 nm size, consistent with the above hypothesis since xi(0) = 6 nm. High critical current densities, more than 10^6 A/cm^2 at 1 T and 4.2 K, were obtained for grain colonies separated by carbon. Dirty-limit behavior seen in previous studies may be tied to electron scattering by the precipitates, indicating the possibility that strong core pinning might be combined with a technologically useful upper critical field if versions of MgCNi_3 with higher T_c can be found.
△ Less
Submitted 28 August, 2001; v1 submitted 24 August, 2001;
originally announced August 2001.
-
Electronic anisotropy, magnetic field-temperature phase diagram and their dependence on resistivity in c-axis oriented MgB2 thin films
Authors:
S. Patnaik,
L. D. Cooley,
A. Gurevich,
A. A. Polyanskii,
J. Jiang,
X. Y. Cai,
A. A. Squitieri,
M. T. Naus,
M. K. Lee,
J. H. Choi,
L. Belenky,
S. D. Bu,
J. Letteri,
X. Song,
D. G. Schlom,
S. E. Babcock,
C. B. Eom,
E. E. Hellstrom,
D. C. Larbalestier
Abstract:
An important predicted, but so far uncharacterized, property of the new superconductor MgB2 is electronic anisotropy arising from its layered crystal structure. Here we report on three c-axis oriented thin films, showing that the upper critical field anisotropy ratio Hc2par/Hc2perp is 1.8 to 2.0, the ratio increasing with higher resistivity. Measurements of the magnetic field-temperature phase d…
▽ More
An important predicted, but so far uncharacterized, property of the new superconductor MgB2 is electronic anisotropy arising from its layered crystal structure. Here we report on three c-axis oriented thin films, showing that the upper critical field anisotropy ratio Hc2par/Hc2perp is 1.8 to 2.0, the ratio increasing with higher resistivity. Measurements of the magnetic field-temperature phase diagram show that flux pinning disappears at H* ~ 0.8Hc2perp(T) in untextured samples. Hc2par(0) is strongly enhanced by alloying to 39 T for the highest resistivity film, more than twice that seen in bulk samples.
△ Less
Submitted 28 April, 2001;
originally announced April 2001.
-
Thin Film Magnesium Boride Superconductor with Very High Critical Current Density and Enhanced Irreversibility Field
Authors:
C. B. Eom,
M. K. Lee,
J. H. Choi,
L. Belenky,
X. Song,
L. D. Cooley,
M. T. Naus,
S. Patnaik,
J. Jiang,
M. Rikel,
A. Polyanskii,
A. Gurevich,
X. Y. Cai,
S. D. Bu,
S. E. Babcock,
E. E. Hellstrom,
D. C. Larbalestier,
N. Rogado,
K. A. Regan,
M. A. Hayward,
T. He,
J. S. Slusky,
K. Inumaru,
M. K. Haas,
R. J. Cava
Abstract:
The discovery of superconductivity at 39 K in magnesium diboride offers the possibility of a new class of low-cost, high-performance superconducting materials for magnets and electronic applications. With twice the critical temperature of Nb_3Sn and four times that of Nb-Ti alloy, MgB_2 has the potential to reach much higher fields and current densities than either of these technological superco…
▽ More
The discovery of superconductivity at 39 K in magnesium diboride offers the possibility of a new class of low-cost, high-performance superconducting materials for magnets and electronic applications. With twice the critical temperature of Nb_3Sn and four times that of Nb-Ti alloy, MgB_2 has the potential to reach much higher fields and current densities than either of these technological superconductors. A vital prerequisite, strongly linked current flow, has already been demonstrated even at this early stage. One possible drawback is the observation that the field at which superconductivity is destroyed is modest. Further, the field which limits the range of practical applications, the irreversibility field H*(T), is ~7 T at liquid helium temperature (4.2 K), significantly lower than ~10 T for Nb-Ti and ~20 T for Nb_3Sn. Here we show that MgB_2 thin films can exhibit a much steeper temperature dependence of H*(T) than is observed in bulk materials, yielding H*(4.2 K) above 14 T. In addition, very high critical current densities at 4.2 K, 1 MA/cm_2 at 1 T and 10_5 A/cm_2 at 10 T, are possible. These data demonstrate that MgB_2 has credible potential for high-field superconducting applications.
△ Less
Submitted 20 March, 2001;
originally announced March 2001.
-
Strongly linked current flow in polycrystalline forms of the new superconductor MgB2
Authors:
D. C. Larbalestier,
M. O. Rikel,
L. D. Cooley,
A. A. Polyanskii,
J. Y. Jiang,
S. Patnaik,
X. Y. Cai,
D. M. Feldmann,
A. Gurevich,
A. A. Squitieri,
M. T. Naus,
C. B. Eom,
E. E. Hellstrom,
R. J. Cava,
K. A. Regan,
N. Rogado,
M. A. Hayward,
T. He,
J. S. Slusky,
P. Khalifah,
K. Inumaru,
M. Haas
Abstract:
The discovery of superconductivity at 39 K in MgB2[1] raises many issues. One of the central questions is whether this new superconductor resembles a high-temperature-cuprate superconductor or a low-temperature metallic superconductor in terms of its current carrying characteristics in applied magnetic fields. In spite of the very high transition temperatures of the cuprate superconductors, thei…
▽ More
The discovery of superconductivity at 39 K in MgB2[1] raises many issues. One of the central questions is whether this new superconductor resembles a high-temperature-cuprate superconductor or a low-temperature metallic superconductor in terms of its current carrying characteristics in applied magnetic fields. In spite of the very high transition temperatures of the cuprate superconductors, their performance in magnetic fields has several drawbacks[2]. Their large anisotropy restricts high bulk current densities to much less than the full magnetic field-temperature (H-T) space over which superconductivity is found. Further, weak coupling across grain boundaries makes transport current densities in untextured polycrystalline forms low and strongly magnetic field sensitive[3,4]. These studies of MgB2 address both issues. In spite of the multi-phase, untextured, nano-scale sub-divided nature of our samples, supercurrents flow throughout without the strong sensitivity to weak magnetic fields characteristic of Josephson-coupled grains[3]. Magnetization measurements over nearly all of the superconducting H-T plane show good temperature scaling of the flux pinning force, suggestive of a current density determined by flux pinning. At least two length scales are suggested by the magnetization and magneto optical (MO) analysis but the cause of this seems to be phase inhomogeneity, porosity, and minority insulating phase such as MgO rather than by weakly coupled grain boundaries. Our results suggest that polycrystalline ceramics of this new class of superconductor will not be compromised by the weak link problems of the high temperature superconductors, a conclusion with enormous significance for applications if higher temperature analogs of this compound can be discovered.
△ Less
Submitted 12 February, 2001;
originally announced February 2001.
