-
Strain-dependent Insulating State and Kondo Effect in Epitaxial SrIrO$_{3}$ Films
Authors:
Gaurab Rimal,
Tanzila Tasnim,
Gabriel Calderon Ortiz,
George E. Sterbinsky,
**woo Hwang,
Ryan B. Comes
Abstract:
The large spin-orbit coupling in iridium oxides plays a significant role in driving novel physical behaviors, including emergent phenomena in the films and heterostructures of perovskite and Ruddlesden-Popper iridates. In this work, we study the role of epitaxial strain on the electronic behavior of thin SrIrO$_3$ films. We find that compressive epitaxial strain leads to metallic transport behavio…
▽ More
The large spin-orbit coupling in iridium oxides plays a significant role in driving novel physical behaviors, including emergent phenomena in the films and heterostructures of perovskite and Ruddlesden-Popper iridates. In this work, we study the role of epitaxial strain on the electronic behavior of thin SrIrO$_3$ films. We find that compressive epitaxial strain leads to metallic transport behavior, but a slight tensile strain shows gapped behavior. Temperature-dependent resistivity measurements are used to examine different behaviors in films as a function of strain. We find Kondo contributions to the resistivity, with stronger effects in films that are thinner and under less compressive epitaxial strain. These results show the potential to tune SrIrO$_3$ into Kondo insulating states and open possibilities for a quantum critical point that can be controlled with strain in epitaxial films.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Comparing growth of titania and carbonaceous dusty nanoparticles in weakly magnetised capacitively coupled plasmas
Authors:
Bhavesh Ramkorun,
Gautam Chandrasekhar,
Vijaya Rangari,
Saikat C. Thakur,
Ryan B. Comes,
Edward Thomas Jr
Abstract:
This study investigates the growth cycles of titania and carbonaceous dusty nanoparticles in capacitively coupled radiofrequency plasmas, focusing on the impact of weak magnetic field of approximately 480 Gauss. The growth of dusty nanoparticles in these plasmas is cyclic, with particles reaching their maximum size and subsequently moving out of the plasma, followed by the initiation of a new part…
▽ More
This study investigates the growth cycles of titania and carbonaceous dusty nanoparticles in capacitively coupled radiofrequency plasmas, focusing on the impact of weak magnetic field of approximately 480 Gauss. The growth of dusty nanoparticles in these plasmas is cyclic, with particles reaching their maximum size and subsequently moving out of the plasma, followed by the initiation of a new particle growth cycle. We compare the growth of titania and carbonaceous dusty particles in the presence and absence of a magnetic field. The presence of the magnetic field fastens the growth cycle in both types of dusty plasmas. Langmuir probe measurement of the background plasma parameters such as electron temperature and floating potential reveal radial variations in floating potential but not electron temperature. Furthermore, the magnetic field changes the radial variation of floating potential. The magnetic field also influences the spatial distribution of the two dust cloud differently. It is possible that these differences arises due to the material's different response to the magnetic field. These findings shed light on the intricate dynamics of titania and carbonaceous dusty plasma particle growth, offering insights into the impact of weak magnetization on dust behavior, which have implications for various applications, from space science to semiconductor processing.
△ Less
Submitted 4 April, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Introducing dusty plasma particle growth of nanospherical titanium dioxide
Authors:
Bhavesh Ramkorun,
Swapneal Jain,
Adib Taba,
Masoud Mahjouri-Samani,
Michael E. Miller,
Saikat C. Thakur,
Edward Thomas Jr.,
Ryan B. Comes
Abstract:
In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homoge…
▽ More
In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homogeneous radius of 230 $\pm$ 17 nm after an elapsed time of 70 seconds. The particle grew linearly and the growth displayed a cyclic behavior; that is, upon reaching their maximum radius, the largest particles fell out of the plasma, and a new growth cycle immediately followed. The particles were collected after being grown for different amounts of time and imaged using scanning electron microscopy. Further characterization was carried out using energy dispersive X-ray spectroscopy, X-ray diffraction and Raman spectroscopy to elucidate the chemical composition and crystalline properties of the maximally sized particles. Initially, the as-grown particles after 70 seconds exhibited an amorphous structure. However, annealing treatments at temperatures of 400 $^\circ$C and 800 $^\circ$C induced crystallization, yielding anatase and rutile phases, respectively. Notably, annealing at 600 $^\circ$C resulted in a mixed phase of anatase and rutile. These findings open new avenues for a rapid and controlled growth technique of titanium dioxide as dusty plasma.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
Advances in Complex Oxide Quantum Materials Through New Approaches to Molecular Beam Epitaxy
Authors:
Gaurab Rimal,
Ryan B. Comes
Abstract:
Molecular beam epitaxy (MBE), a workhorse of the semiconductor industry, has progressed rapidly in the last few decades in the development of novel materials. Recent developments in condensed matter and materials physics have seen the rise of many novel quantum materials that require ultra-clean and high-quality samples for fundamental studies and applications. Novel oxide-based quantum materials…
▽ More
Molecular beam epitaxy (MBE), a workhorse of the semiconductor industry, has progressed rapidly in the last few decades in the development of novel materials. Recent developments in condensed matter and materials physics have seen the rise of many novel quantum materials that require ultra-clean and high-quality samples for fundamental studies and applications. Novel oxide-based quantum materials synthesized using MBE have advanced the development of the field and materials. In this review, we discuss the recent progress in new MBE techniques that have enabled synthesis of complex oxides that exhibit "quantum" phenomena, including superconductivity and topological electronic states. We show how these techniques have produced breakthroughs in the synthesis of 4d and 5d oxide films and heterostructures that are of particular interest as quantum materials. These new techniques in MBE offer a bright future for the synthesis of ultra-high quality oxide quantum materials.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
Jahn-Teller-driven Phase Segregation in Mn$_{x}$Co$_{3-x}$O$_{4}$ Spinel Thin Films
Authors:
Miles D. Blanchet,
Bethany E. Matthews,
Steven R. Spurgeon,
Steve M. Heald,
Tamara Issacs-Smith,
Ryan B. Comes
Abstract:
Transition metal spinel oxides comprised of Earth-abundant Mn and Co have long been explored for their use in catalytic reactions and energy storage. However, understanding of functional properties can be challenging due to differences in sample preparation and the ultimate structural properties of the materials. Epitaxial thin film synthesis provides a novel means of producing precisely-controlle…
▽ More
Transition metal spinel oxides comprised of Earth-abundant Mn and Co have long been explored for their use in catalytic reactions and energy storage. However, understanding of functional properties can be challenging due to differences in sample preparation and the ultimate structural properties of the materials. Epitaxial thin film synthesis provides a novel means of producing precisely-controlled materials to explore the variations reported in the literature. In this work, Mn$_{x}$Co$_{3-x}$O$_{4}$ samples from x = 0 to x = 1.28 were synthesized through molecular beam epitaxy and characterized to develop a material properties map as a function of stoichiometry. Films were characterized via in situ X-ray photoelectron spectroscopy, X-ray diffraction, scanning transmission electron microscopy, and polarized K-edge X-ray absorption spectroscopy. Mn cations within this range were found to be octahedrally coordinated, in line with an inverse spinel structure. Samples largely show mixed Mn$^{3+}$ and Mn$^{4+}$ character with evidence of phase segregation tendencies with increasing Mn content and increasing Mn$^{3+}$ formal charge. Phase segregation may occur due to structural incompatibility between cubic and tetragonal crystal structures associated with Mn$^{4+}$ and Jahn-Teller active Mn$^{3+}$ octahedra, respectively. Our results help to explain the reported differences across samples in these promising materials for renewable energy technologies.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
Band-Engineered LaFeO$_{3}$-LaNiO$_{3}$ Thin Film Interfaces for Electrocatalysis of Water
Authors:
Rajendra Paudel,
Andricus R. Burton,
Marcelo A. Kuroda,
Byron H. Farnum,
Ryan B. Comes
Abstract:
Transition metal oxides have generated significant interest for their potential as catalysts for the oxygen evolution reaction (OER) in alkaline environments. Iron and nickel-based perovskite oxides have proven particularly promising, with catalytic over-potentials rivaling precious metal catalysts when the alignment of the valence band relative to the OER reaction potential is tuned through subst…
▽ More
Transition metal oxides have generated significant interest for their potential as catalysts for the oxygen evolution reaction (OER) in alkaline environments. Iron and nickel-based perovskite oxides have proven particularly promising, with catalytic over-potentials rivaling precious metal catalysts when the alignment of the valence band relative to the OER reaction potential is tuned through substitutional do** or alloying. Here we report that engineering of band alignment in LaFeO$_{3}$/LaNiO$_{3}$ (LFO/LNO) heterostructures via interfacial do** yields greatly enhanced catalytic performance. Using density functional theory modeling, we predict a 0.2 eV valence band offset (VBO) between metallic LNO and semiconducting LFO that significantly lowers the barrier for hole transport through LFO compared to the intrinsic material and make LFO a p-type semiconductor. Experimental band alignment measurements using in situ X-ray photoelectron spectroscopy of epitaxial LFO/LNO heterostructures agree quite well with these predictions, producing a measured VBO of 0.3(1) eV. OER catalytic measurements on the same samples in alkaline solution show an increase in catalytic current density by a factor of ~275 compared to LFO grown on n-type Nb-doped SrTiO$_{3}$. These results demonstrate the power of tuning band alignments through interfacial band engineering for improved catalytic
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Oxygen Reduction Electrocatalysis with Epitaxially Grown Spinel MnFe$_{2}$O$_{4}$ and Fe$_{3}$O$_{4}$
Authors:
Alexandria R. C. Bredar,
Miles D. Blanchet,
Andricus R. Burton,
Bethany Matthews,
Steven R. Spurgeon,
Ryan B. Comes,
Byron H. Farnum
Abstract:
Nanocrystalline MnFe$_{2}$O$_{4}$ has shown promise as a catalyst for the oxygen reduction reaction (ORR) in alkaline solutions, but the material has been lightly studied as highly ordered thin film catalysts. To examine the role of surface termination and Mn and Fe site occupancy, epitaxial MnFe$_{2}$O$_{4}$ and Fe$_{3}$O$_{4}$ spinel oxide films were grown on (001) and (111) oriented Nb:SrTiO…
▽ More
Nanocrystalline MnFe$_{2}$O$_{4}$ has shown promise as a catalyst for the oxygen reduction reaction (ORR) in alkaline solutions, but the material has been lightly studied as highly ordered thin film catalysts. To examine the role of surface termination and Mn and Fe site occupancy, epitaxial MnFe$_{2}$O$_{4}$ and Fe$_{3}$O$_{4}$ spinel oxide films were grown on (001) and (111) oriented Nb:SrTiO$_{3}$ perovskite substrates using molecular beam epitaxy and studied as electrocatalysts for the oxygen reduction reaction (ORR). HRXRD and XPS show synthesis of pure phase materials while STEM and RHEED analysis demonstrate island-like growth of (111) surface terminated pyramids on both (001) and (111) oriented substrates, consistent with the literature and attributed to lattice mismatch between the spinel films and perovskite substrate. Cyclic voltammograms under an N$_{2}$ atmosphere revealed distinct redox features for Mn and Fe surface termination based on comparison of MnFe$_{2}$O$_{4}$ and Fe$_{3}$O$_{4}$. Under O$_{2}$ atmosphere, electrocatalytic reduction of oxygen was observed at both Mn and Fe redox features; however, diffusion limited current was only achieved at potentials consistent with Fe reduction. This result contrasts with that of nanocrystalline MnFe$_{2}$O$_{4}$ reported in the literature where diffusion limited current is achieved with Mn-based catalysis. This difference is attributed to a low density of Mn surface termination, as determined by the integration of current from CVs collected under N$_{2}$, in addition to low conductivity through the MnFe$_{2}$O$_{4}$ film due to the degree of inversion. Such low densities are attributed to the synthetic method and island-like growth pattern and highlight challenges in studying ORR catalysis with single-crystal spinel materials.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
Surface Stability of SrNbO$_{3+δ}$ Grown by Hybrid Molecular Beam Epitaxy
Authors:
Suresh Thapa,
Sydney Provence,
Steve M. Heald,
Marcelo A. Kuroda,
Ryan B. Comes
Abstract:
4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO$_{3}$ is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d$^{1}$ Nb$^{4+}$ cation and the lim…
▽ More
4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO$_{3}$ is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d$^{1}$ Nb$^{4+}$ cation and the limitations in the delivery of refractory Nb. To date, films have been grown primarily by pulsed laser deposition (PLD), but development of a means to grow and stabilize the material via molecular beam epitaxy (MBE) would enable studies of interfacial phenomena and multilayer structures that may be challenging by PLD. To that end, SrNbO$_{3}$ thin films were grown using hybrid MBE for the first time using a tris(diethalamido)(tert-butylimido) niobium precursor for Nb and an elemental Sr source on GdScO$_{3}$ substrates. Varying thicknesses of insulating SrHfO$_{3}$ cap** layers were deposited using a hafnium tert-butoxide precursor for Hf on top of SrNbO$_{3}$ films to preserve the metastable surface. Grown films were transferred in vacuo for X-ray photoelectron spectroscopy to quantify elemental composition, density of states at the Fermi energy, and Nb oxidation state. Ex situ studies by X-ray absorption near edge spectra illustrates the SrHfO$_{3}$ cap** plays an important role in preserving the Nb 4d$^{1}$ metastable charge state in atmospheric conditions.
△ Less
Submitted 28 October, 2021;
originally announced October 2021.
-
Thickness Dependent OER Electrocatalysis of Epitaxial LaFeO$_{3}$ Thin Films
Authors:
Andricus R. Burton,
Rajendra Paudel,
Bethany Matthews,
Michel Sassi,
Steven R. Spurgeon,
Byron H. Farnum,
Ryan B. Comes
Abstract:
Transition metal oxides have long been an area of interest for water electrocatalysis through the oxygen evolution and oxygen reduction reactions. Iron oxides, such as LaFeO$_{3}$, are particularly promising due to the favorable energy alignment of the valence and conduction bands comprised of Fe$^{3+}$ cations and the visible light band gap of such materials. In this work, we examine the role of…
▽ More
Transition metal oxides have long been an area of interest for water electrocatalysis through the oxygen evolution and oxygen reduction reactions. Iron oxides, such as LaFeO$_{3}$, are particularly promising due to the favorable energy alignment of the valence and conduction bands comprised of Fe$^{3+}$ cations and the visible light band gap of such materials. In this work, we examine the role of band alignment on the electrocatalytic oxygen evolution reaction (OER) in the intrinsic semiconductor LaFeO$_{3}$ by growing epitaxial films of varying thicknesses on Nb-doped SrTiO$_{3}$. Using cyclic voltammetry and electrochemical impedance spectroscopy, we find that there is a strong thickness dependence on the efficiency of electrocatalysis for OER. These measurements are understood based on interfacial band alignment in the system as confirmed by layer-resolved electron energy loss spectroscopy and electrochemical Mott-Schottky measurements. Our results demonstrate the importance of band engineering for the rational design of thin film electrocatalysts for renewable energy sources.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
Probing Emergent Surface and Interfacial Properties in Complex Oxides via in situ X-ray Photoelectron Spectroscopy
Authors:
Suresh Thapa,
Rajendra Paudel,
Miles D. Blanchet,
Patrick T. Gemperline,
Ryan B. Comes
Abstract:
Emergent behavior at complex oxide interfaces has driven much of the research in the oxide thin film community for the past twenty years. Interfaces have been engineered for potential applications in spintronics, topological quantum computing, and high-speed electronics in cases where the bulk materials would not exhibit the desired properties. Advances in thin film growth have made the synthesis…
▽ More
Emergent behavior at complex oxide interfaces has driven much of the research in the oxide thin film community for the past twenty years. Interfaces have been engineered for potential applications in spintronics, topological quantum computing, and high-speed electronics in cases where the bulk materials would not exhibit the desired properties. Advances in thin film growth have made the synthesis of these interfaces possible, while surface characterization tools such as X-ray photoelectron spectroscopy have been critical to understanding surface and interfacial phenomena in these materials. In this review we discuss the leading research in the oxide field over the past 5-10 years with a focus on connecting the key results to the X-ray photoelectron spectroscopy studies that enabled them. We describe how in situ integration of synthesis and spectroscopy can be used to improve the film growth process and to perform immediate experiments on specifically tailored interfacial heterostructures. These studies can include determination of interfacial intermixing, valence band alignment, and interfacial charge transfer. We also show how advances in synchrotron-based spectroscopy techniques have answered questions that cannot be addressed in a lab-based system. By further tying together synthesis and spectroscopy through in situ techniques, we conclude by discussing future opportunities in the field through the careful design of thin film heterostructures that are optimized for X-ray studies.
△ Less
Submitted 12 June, 2020;
originally announced June 2020.
-
Machine Learning Analysis of Perovskite Oxides Grown by Molecular Beam Epitaxy
Authors:
Sydney R. Provence,
Suresh Thapa,
Rajendra Paudel,
Tristan Truttmann,
Abhinav Prakash,
Bharat Jalan,
Ryan B. Comes
Abstract:
Reflection high-energy electron diffraction (RHEED) is a ubiquitous in situ molecular beam epitaxial (MBE) characterization tool. Although RHEED can be a powerful means for crystal surface structure determination, it is often used as a static qualitative surface characterization method at discrete intervals during a growth. A full analysis of RHEED data collected during the entirety of MBE growths…
▽ More
Reflection high-energy electron diffraction (RHEED) is a ubiquitous in situ molecular beam epitaxial (MBE) characterization tool. Although RHEED can be a powerful means for crystal surface structure determination, it is often used as a static qualitative surface characterization method at discrete intervals during a growth. A full analysis of RHEED data collected during the entirety of MBE growths is made possible using principle component analysis (PCA) and k-means clustering to examine significant boundaries that occur in the temporal clusters grouped from RHEED data and identify statistically significant patterns. This process is applied to data from homoepitaxial SrTiO$_{3}$ growths, heteroepitaxial SrTiO$_{3}$ grown on scandate substrates, BaSnO$_{3}$ films grown on SrTiO$_{3}$ substrates, and LaNiO$_{3}$ films grown on LaAlO$_{3}$ substrates. This analysis may provide additional insights into the surface evolution and transitions in growth modes at precise times and depths during growth, and that video archival of an entire RHEED image sequence may be able to provide more insight and control over growth processes and film quality.
△ Less
Submitted 31 March, 2020;
originally announced April 2020.
-
Correlating surface stoichiometry and termination in SrTiO$_{3}$ films grown by hybrid molecular beam epitaxy
Authors:
Suresh Thapa,
Sydney R. Provence,
Devin Jessup,
Jason Lapano,
Matthew Brahlek,
Jerzy T. Sadowski,
Petra Reinke,
Wencan **,
Ryan B. Comes
Abstract:
Hybrid oxide molecular beam epitaxy (hMBE), a thin-film deposition technique in which transition metal cations are delivered using a metal-organic precursor, has emerged as the state-of-the-art approach to the synthesis of electronic-grade complex oxide films with a stoichiometric growth window. However, numerous questions remain regarding the chemical mechanisms of the growth process and the surf…
▽ More
Hybrid oxide molecular beam epitaxy (hMBE), a thin-film deposition technique in which transition metal cations are delivered using a metal-organic precursor, has emerged as the state-of-the-art approach to the synthesis of electronic-grade complex oxide films with a stoichiometric growth window. However, numerous questions remain regarding the chemical mechanisms of the growth process and the surface properties of the resulting films. To examine these properties, thin film SrTiO$_{3}$ (STO) was prepared by hMBE using a titanium tetraisopropoxide (TTIP) precursor for Ti delivery and an elemental Sr source on annealed STO and Nb-doped STO substrates with varying TTIP:Sr flux ratios to examine the conditions for the reported stoichiometric growth window. The films were transferred in vacuo to an x-ray photoelectron spectroscopy system to study the surface elemental composition. Samples were examined using x-ray diffraction to compare our surface sensitive results with previously reported measurements of the bulk of the films in the literature. Ex situ studies by atomic force microscopy, scanning tunneling microscopy and low energy electron microscopy confirmed the presence of surface reconstructions and an Ehrlich-Schwoebel barrier consistent with an A-site SrO termination. We find that a surface exhibiting a mixture of SrO and TiO$_{2}$ termination, or a full SrO termination is necessary to obtain stoichiometric adsorption-controlled growth. These results indicate that surface Sr is necessary to maintain chemical equilibrium for stoichiometric growth during the hMBE process, which is important for the design of future interfacial systems using this technique.
△ Less
Submitted 19 July, 2021; v1 submitted 31 March, 2020;
originally announced April 2020.
-
Interface properties and built-in potential profile of a LaCrO$_3$/SrTiO$_3$ superlattice determined by standing-wave excited photoemission spectroscopy
Authors:
Shih-Chieh Lin,
Cheng-Tai Kuo,
Ryan B. Comes,
Julien E. Rault,
Jean-Pascal Rueff,
Slavomir Nemšák,
Amina Taleb,
Jeffrey B. Kortright,
Julia Meyer-Ilse,
Eric Gullikson,
Peter V. Sushko,
Steven R. Spurgeon,
Mathias Gehlmann,
Mark E. Bowden,
Lukasz Plucinski,
Scott A. Chambers,
Charles S. Fadley
Abstract:
LaCrO$_3$ (LCO) / SrTiO$_3$ (STO) heterojunctions are intriguing due to a polar discontinuity along (001), two distinct and controllable interface structures [(LaO)$^+$/(TiO$_2$)$^0$ and (SrO)$^0$/(CrO$_2$)$^-$], and interface-induced polarization. In this study, we have used soft- and hard x-ray standing-wave excited photoemission spectroscopy (SW-XPS) to generate a quantitative determination of…
▽ More
LaCrO$_3$ (LCO) / SrTiO$_3$ (STO) heterojunctions are intriguing due to a polar discontinuity along (001), two distinct and controllable interface structures [(LaO)$^+$/(TiO$_2$)$^0$ and (SrO)$^0$/(CrO$_2$)$^-$], and interface-induced polarization. In this study, we have used soft- and hard x-ray standing-wave excited photoemission spectroscopy (SW-XPS) to generate a quantitative determination of the elemental depth profiles and interface properties, band alignments, and the depth distribution of the interface-induced built-in potentials in the two constituent oxides. We observe an alternating charged interface configuration: a positively charged (LaO)$^+$/(TiO$_2$)$^0$ intermediate layer at the LCO$_\textbf{top}$/STO$_\textbf{bottom}$ interface and a negatively charged (SrO)$^0$/(CrO$_2$)$^-$ intermediate layer at the STO$_\textbf{top}$/LCO$_\textbf{bottom}$ interface. Using core-level SW data, we have determined the depth distribution of species, including through the interfaces, and these results are in excellent agreement with scanning transmission electron microscopy and electron energy loss spectroscopy (STEM-EELS) map** of local structure and composition. SW-XPS also enabled deconvolution of the LCO-contributed and STO- contributed matrix-element-weighted density of states (MEWDOSs) from the valence band (VB) spectra for the LCO/STO superlattice (SL). Monitoring the VB edges of the deconvoluted MEWDOS shifts with a change in probing profile, the alternating charge- induced built-in potentials are observed in both constituent oxides. Finally, using a two-step simulation approach involving first core-level binding energy shifts and then valence-band modeling, the built-in potential gradients across the SL are resolved in detail and represented by the depth distribution of VB edges.
△ Less
Submitted 31 August, 2018; v1 submitted 27 February, 2018;
originally announced February 2018.
-
Dynamic Interface Rearrangement in LaFeO$_3$ / $n$-SrTiO$_3$ Heterojunctions
Authors:
Steven R. Spurgeon,
Peter V. Sushko,
Ryan B. Comes,
Scott A. Chambers
Abstract:
Thin film synthesis methods developed over the past decades have unlocked emergent interface properties ranging from conductivity to ferroelectricity. However, our attempts to exercise precise control over interfaces are constrained by a limited understanding of growth pathways and kinetics. Here we demonstrate that shuttered molecular beam epitaxy induces rearrangements of atomic planes at a pola…
▽ More
Thin film synthesis methods developed over the past decades have unlocked emergent interface properties ranging from conductivity to ferroelectricity. However, our attempts to exercise precise control over interfaces are constrained by a limited understanding of growth pathways and kinetics. Here we demonstrate that shuttered molecular beam epitaxy induces rearrangements of atomic planes at a polar / non-polar junction of LaFeO$_3$ (LFO) / $n$-SrTiO$_3$ (STO) depending on the substrate termination. Surface characterization confirms that substrates with two different (TiO$_2$ and SrO) terminations were prepared prior to LFO deposition; however, local electron energy loss spectroscopy measurements of the final heterojunctions show a predominantly LaO / TiO$_2$ interfacial junction in both cases. Ab initio simulations suggest that the interfaces can be stabilized by trap** extra oxygen (in LaO / TiO$_2$) and forming oxygen vacancies (in FeO$_2$ / SrO), which points to different growth kinetics in each case and may explain the apparent disappearance of the FeO$_2$ / SrO interface. We conclude that judicious control of deposition timescales can be used to modify growth pathways, opening new avenues to control the structure and properties of interfacial systems.
△ Less
Submitted 22 August, 2017;
originally announced August 2017.
-
Interface-induced Polarization in SrTiO$_3$-LaCrO$_3$ Superlattices
Authors:
Ryan B. Comes,
Steven R. Spurgeon,
Steve M. Heald,
Despoina M. Kepaptsoglou,
Lewys Jones,
Phuong Vu Ong,
Mark E. Bowden,
Quentin M. Ramasse,
Peter V. Sushko,
Scott A. Chambers
Abstract:
Epitaxial interfaces and superlattices comprised of polar and non-polar perovskite oxides have generated considerable interest because they possess a range of desirable properties for functional devices. In this work, emergent polarization in superlattices of SrTiO$_3$ (STO) and LaCrO$_3$ (LCO) is demonstrated. By controlling the interfaces between polar LCO and non-polar STO, polarization is indu…
▽ More
Epitaxial interfaces and superlattices comprised of polar and non-polar perovskite oxides have generated considerable interest because they possess a range of desirable properties for functional devices. In this work, emergent polarization in superlattices of SrTiO$_3$ (STO) and LaCrO$_3$ (LCO) is demonstrated. By controlling the interfaces between polar LCO and non-polar STO, polarization is induced throughout the STO layers of the superlattice. Using x-ray absorption near-edge spectroscopy and aberration-corrected scanning transmission electron microscopy displacements of the Ti cations off-center within TiO6 octahedra along the superlattice growth direction are measured. This distortion gives rise to built-in potential gradients within the STO and LCO layers, as measured by in situ x-ray photoelectron spectroscopy. Density functional theory models explain the mechanisms underlying this behavior, revealing the existence of both an intrinsic polar distortion and a built-in electric field, which are due to alternately positively and negatively charged interfaces in the superlattice. This study paves the way for controllable polarization for carrier separation in multilayer materials and highlights the crucial role that interface structure plays in governing such behavior.
△ Less
Submitted 8 April, 2016;
originally announced April 2016.
-
Exchange Bias and Bistable Magneto-Resistance States in Amorphous TbFeCo thin Films
Authors:
Xiaopu Li,
Chung T. Ma,
Jiwei Lu,
Arun Devaraj,
Steven R. Spurgeon,
Ryan B. Comes,
S. Joseph Poon
Abstract:
Amorphous TbFeCo thin films sputter deposited at room temperature on thermally oxidized Si substrate are found to exhibit strong perpendicular magnetic anisotropy (PMA). Atom probe tomography (APT), scanning transmission electron microscopy (STEM), and energy dispersive spectroscopy (EDS) map** have revealed two nanoscale amorphous phases with different Tb atomic percentages distributed within t…
▽ More
Amorphous TbFeCo thin films sputter deposited at room temperature on thermally oxidized Si substrate are found to exhibit strong perpendicular magnetic anisotropy (PMA). Atom probe tomography (APT), scanning transmission electron microscopy (STEM), and energy dispersive spectroscopy (EDS) map** have revealed two nanoscale amorphous phases with different Tb atomic percentages distributed within the amorphous film. Exchange bias accompanied by bistable magneto-resistance states has been uncovered near room temperature by magnetization and magneto-transport measurements. The exchange anisotropy originates from the exchange interaction between the ferrimagnetic and ferromagnetic components corresponding to the two amorphous phases. This study provides a platform for exchange bias and magneto-resistance switching using single-layer amorphous ferrimagnetic thin films that require no epitaxial growth.
△ Less
Submitted 18 December, 2015;
originally announced December 2015.
-
Infrared Optical Absorption in Low-spin Fe$^{2+}$-doped SrTiO${}_{3}$
Authors:
Ryan B. Comes,
Tiffany C. Kaspar,
Steve M. Heald,
Mark E. Bowden,
Scott A. Chambers
Abstract:
Band gap engineering in SrTiO${}_{3}$ and related titanate perovskites has long been explored due to the intriguing properties of the materials for photocatalysis and photovoltaic applications. A popular approach in the materials chemistry community is to substitutionally dope aliovalent transition metal ions onto the B site in the lattice to alter the valence band. However, in such a scheme there…
▽ More
Band gap engineering in SrTiO${}_{3}$ and related titanate perovskites has long been explored due to the intriguing properties of the materials for photocatalysis and photovoltaic applications. A popular approach in the materials chemistry community is to substitutionally dope aliovalent transition metal ions onto the B site in the lattice to alter the valence band. However, in such a scheme there is limited control over the dopant valence, and compensating defects often form. Here we demonstrate a novel technique to controllably synthesize Fe$^{2+}$- and Fe$^{3+}$-doped SrTiO${}_{3}$ thin films without formation of compensating defects by co-do** with La$^{3+}$ ions on the A site. We stabilize Fe$^{2+}$-doped films by do** with two La ions for every Fe dopant, and find that the Fe ions exhibit a low-spin electronic configuration, producing optical transitions in the near infrared regime and degenerate do**. The novel electronic states observed here offer a new avenue for band gap engineering in perovskites for photocatalytic and photovoltaic applications.
△ Less
Submitted 20 October, 2015;
originally announced October 2015.
-
Band alignment of epitaxial SrTiO3 thin films with (LaAlO3)0.3-(Sr2AlTaO6)0.7 (001)
Authors:
Ryan B. Comes,
Peng Xu,
Bharat Jalan,
Scott A. Chambers
Abstract:
SrTiO$_{3}$ (STO) epitaxial thin films and heterostructures are of considerable interest due to the wide range of functionalities they exhibit. The alloy perovskite (LaAlO$_{3}$)$_{0.3}$-(Sr$_{2}$AlTaO$_{6}$)$_{0.7}$ (LSAT) is commonly used as a substrate for these material structures due to its structural compatibility with STO and the strain-induced ferroelectric response in STO films grown on L…
▽ More
SrTiO$_{3}$ (STO) epitaxial thin films and heterostructures are of considerable interest due to the wide range of functionalities they exhibit. The alloy perovskite (LaAlO$_{3}$)$_{0.3}$-(Sr$_{2}$AlTaO$_{6}$)$_{0.7}$ (LSAT) is commonly used as a substrate for these material structures due to its structural compatibility with STO and the strain-induced ferroelectric response in STO films grown on LSAT. However, surprisingly little is known about the electronic properties of the STO/LSAT interface despite its potentially important role in affecting the overall electronic structure of system. We examine the band alignment of STO/LSAT heterostructures using x-ray photoelectron spectroscopy for epitaxial STO films deposited using two different molecular beam epitaxy approaches. We find that the valence band offset ranges from +0.2(1) eV to -0.2(1) eV depending on the film surface termination. From these results we extract a conduction band offset from -2.4(1) eV to -2.8(1) eV, indicating that the conduction band edge is more deeply bound in STO and that LSAT will not act as a sink or trap for electrons in the supported film or multilayer.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
Visible light carrier generation in co-doped epitaxial titanate films
Authors:
Ryan B. Comes,
Sergey Y. Smolin,
Tiffany C. Kaspar,
Ran Gao,
Brent A. Apgar,
Lane W. Martin,
Mark E. Bowden,
Jason B. Baxter,
Scott A. Chambers
Abstract:
Perovskite titanates such as SrTiO$_{3}$ (STO) exhibit a wide range of important functional properties, including high electron mobility, ferroelectricity, and excellent photocatalytic performance. The wide optical band gap of titanates limits their use in these applications, however, making them ill-suited for integration into solar energy harvesting technologies. Our recent work has shown that b…
▽ More
Perovskite titanates such as SrTiO$_{3}$ (STO) exhibit a wide range of important functional properties, including high electron mobility, ferroelectricity, and excellent photocatalytic performance. The wide optical band gap of titanates limits their use in these applications, however, making them ill-suited for integration into solar energy harvesting technologies. Our recent work has shown that by do** STO with equal concentrations of La and Cr we can enhance visible light absorption in epitaxial thin films while avoiding any compensating defects. In this work, we explore the optical properties of photoexcited carriers in these films. Using spectroscopic ellipsometry, we show that the Cr$^{3+}$ dopants, which produce electronic states immediately above the top of the O 2p valence band in STO reduce the direct band gap of the material from 3.75 eV to between 2.4 and 2.7 eV depending on do** levels. Transient reflectance spectroscopy measurements are in agreement with the observations from ellipsometry and confirm that optically generated carriers are present for longer than 2 ns. Finally, through photoelectrochemical methylene blue degradation measurements, we show that these co-doped films exhibit enhanced visible light photocatalysis when compared to pure STO.
△ Less
Submitted 28 January, 2015;
originally announced January 2015.
-
Microstructural Effects of Chemical Island Templating in Patterned Matrix-Pillar Oxide Nanocomposites
Authors:
Ryan B. Comes,
Kerry Siebein,
Jiwei Lu,
Stuart A. Wolf
Abstract:
The ability to pattern the location of pillars in epitaxial matrix-pillar nanocomposites is a key challenge to develop future technologies using these intriguing materials. One such model system employs a ferrimagnetic CoFe$_{2}$O$_{4}$ (CFO) pillar embedded in a ferroelectric BiFeO$_{3}$ (BFO) matrix, which has been proposed as a possible memory or logic system. These composites self-assemble spo…
▽ More
The ability to pattern the location of pillars in epitaxial matrix-pillar nanocomposites is a key challenge to develop future technologies using these intriguing materials. One such model system employs a ferrimagnetic CoFe$_{2}$O$_{4}$ (CFO) pillar embedded in a ferroelectric BiFeO$_{3}$ (BFO) matrix, which has been proposed as a possible memory or logic system. These composites self-assemble spontaneously with pillars forming through nucleation at a random location when grown via physical vapor deposition. Recent results have shown that if an island of the pillar material is pre-patterned on the substrate, it is possible to control the nucleation process and determine the locations where pillars form. In this work, we employ electron microscopy and x-ray diffraction to examine the chemical composition and microstructure of patterned CFO-BFO nanocomposites. Cross-sectional transmission electron microscopy is used to examine the nucleation effects at the interface between the template island and resulting pillar.Evidence of grain boundaries and lattice tilting in the templated pillars is also presented and attributed to the microstructure of the seed island.
△ Less
Submitted 25 October, 2015; v1 submitted 5 January, 2015;
originally announced January 2015.
