-
On the floating of the topological surface state on top of a thick lead layer: The case of the Pb/Bi2Se3 interface
Authors:
Oreste De Luca,
Igor A. Shvets,
Sergey V. Eremeev,
Ziya S. Aliev,
Marek Kopciuszynski,
Alexey Barinov,
Fabio Ronci,
Stefano Colonna,
Evgueni V. Chulkov,
Raffaele G. Agostino,
Marco Papagno,
Roberto Flammini
Abstract:
The puzzling question about the floating of the topological surface state on top of a thick Pb layer, has now possibly been answered. A study of the interface made by Pb on Bi2Se3 for different temperature and adsorbate coverage condition, allowed us to demonstrate that the evidence reported in the literature can be related to the surface diffusion phenomenon exhibited by the Pb atoms, which leave…
▽ More
The puzzling question about the floating of the topological surface state on top of a thick Pb layer, has now possibly been answered. A study of the interface made by Pb on Bi2Se3 for different temperature and adsorbate coverage condition, allowed us to demonstrate that the evidence reported in the literature can be related to the surface diffusion phenomenon exhibited by the Pb atoms, which leaves the substrate partially uncovered. Comprehensive density functional theory calculations show that despite the specific arrangement of the atoms at the interface, the topological surface state cannot float on top of the adlayer but rather tends to move inward within the substrate.
△ Less
Submitted 27 November, 2023; v1 submitted 25 August, 2023;
originally announced August 2023.
-
Atomic structure of the single step and dynamics of Sn adatoms on the Si(111)-\sqrt{3}\times\sqrt{3}-Sn surface
Authors:
R. A. Zhachuk,
D. I. Rogilo,
A. S. Petrov,
D. V. Sheglov,
A. V. Latyshev,
S. Colonna,
F. Ronci
Abstract:
The atomic structure of well-ordered single steps on the Si(111)-\sqrt{3}\times\sqrt{3}-Sn surface and the dynamics of Sn adatoms in the vicinity of these steps was studied. The work was performed using low-temperature scanning tunneling microscopy (STM) and ab initio calculations based on the density-functional theory. The STM tip was used to record the tunneling current versus time on top of osc…
▽ More
The atomic structure of well-ordered single steps on the Si(111)-\sqrt{3}\times\sqrt{3}-Sn surface and the dynamics of Sn adatoms in the vicinity of these steps was studied. The work was performed using low-temperature scanning tunneling microscopy (STM) and ab initio calculations based on the density-functional theory. The STM tip was used to record the tunneling current versus time on top of oscillating adatoms, kee** the feedback loop turned off. The dynamics of adatoms, detected as the telegraph noise present in the tunneling current, was registered near the steps at 80 K. The atomic structure model of the single steps consisting of Sn atomic chains along the steps was developed. This structure leads to the formation of potential double wells near the steps acting as traps for Sn atoms and explains the fluctuating current recorded in these areas.
△ Less
Submitted 28 September, 2021;
originally announced September 2021.
-
Properties of graphene-related materials controlling thermal conductivity of their polymer nanocomposites
Authors:
Samuele Colonna,
Daniele Battegazzore,
Matteo Eleuteri,
Rossella Arrigo,
Alberto Fina
Abstract:
Different types of graphene-related materials (GRM) are industrially available and have been exploited for thermal conductivity enhancement in polymers. These include materials with very different features, in terms of thickness, lateral size and composition, especially concerning the oxygen to carbon ratio and the possible presence of surface functionalization. Due to the variability of GRM prope…
▽ More
Different types of graphene-related materials (GRM) are industrially available and have been exploited for thermal conductivity enhancement in polymers. These include materials with very different features, in terms of thickness, lateral size and composition, especially concerning the oxygen to carbon ratio and the possible presence of surface functionalization. Due to the variability of GRM properties, the differences in polymer nanocomposites preparation methods and the microstructures obtained, a large scatter of thermal conductivity performance is found in literature. However, detailed correlations between GRM-based nanocomposites features, including nanoplatelets thickness and size, defectiveness, composition and dispersion, with their thermal conductivity remain mostly undefined. In the present paper, the thermal conductivity of GRM-based polymer nanocomposites, prepared by melt polymerization of cyclic polybutylene terephtalate oligomers, exploiting 13 different GRM grades, was investigated. The selected GRM, covering a wide range of specific surface area, size and defectiveness, secure a sound basis for the understanding of the effect of GRM properties on the thermal conductivity of their relevant polymer nanocomposites. Indeed, the thermal conductivity obtained appeared to depend on the interplay between the above GRM feature. In particular, the combination of low GRM defectiveness and high filler percolation density was found to maximize the nanocomposites thermal conductivity.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
Morphology and magneto-transport in exfoliated graphene on ultrathin crystalline \b{eta}-Si3N4(0001)/Si(111)
Authors:
Sedighe Salimian,
Shaohua Xiang,
Stefano Colonna,
Fabio Ronci,
Marco Fosca,
Francesco Rossella,
Fabio Beltram,
Roberto Flammini,
Stefan Heun
Abstract:
We report the first experimental study of graphene transferred on \b{eta}-Si3N4(0001)/Si(111). Our work provides a comprehensive quantitative understanding of the physics of ultrathin Si3N4 as a gate dielectric for graphene-based devices. The Si3N4 film was grown on Si(111) under ultra-high vacuum (UHV) conditions and investigated by scanning tunneling microscopy (STM). Subsequently, a graphene fl…
▽ More
We report the first experimental study of graphene transferred on \b{eta}-Si3N4(0001)/Si(111). Our work provides a comprehensive quantitative understanding of the physics of ultrathin Si3N4 as a gate dielectric for graphene-based devices. The Si3N4 film was grown on Si(111) under ultra-high vacuum (UHV) conditions and investigated by scanning tunneling microscopy (STM). Subsequently, a graphene flake was deposited on top of it by a polymer-based transfer technique, and a Hall bar device was fabricated from the graphene flake. STM was employed again to study the graphene flake under UHV conditions after device fabrication and showed that surface quality is preserved. Electrical transport measurements, carried out at low temperature in magnetic field, revealed back gate modulation of carrier type and density in the graphene channel and showed the occurrence of weak localization. Under these experimental conditions, no leakage current between back gate and graphene channel was detected.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
A facile and low environmental impact approach to prepare thermally conductive nanocomposites based on polylactide and graphite nanoplatelets
Authors:
Alberto Fina,
Samuele Colonna,
Lorenza Maddalena,
Mauro Tortello,
Orietta Monticelli
Abstract:
In this work, the preparation of nanocomposites based on poly(L-lactide) PLLA and graphite nanoplatelets (GNP) was assessed, by applying, for the first time, the reactive extrusion (REX) polymerization approach, which is considered a low environmental impact method to prepare polymer systems and which allows an easy scalability. In particular, ad hoc synthesized molecules, constituted by a pyrene…
▽ More
In this work, the preparation of nanocomposites based on poly(L-lactide) PLLA and graphite nanoplatelets (GNP) was assessed, by applying, for the first time, the reactive extrusion (REX) polymerization approach, which is considered a low environmental impact method to prepare polymer systems and which allows an easy scalability. In particular, ad hoc synthesized molecules, constituted by a pyrene end group and a poly (D-lactide) (PDLA) chain (Pyr-D), capable of interacting with the surface of GNP layers as well as forming stereoblocks during the ring opening polymerization (ROP) of L-lactide, were used. The nanocomposites were synthesized by adding to L-lactide the GNP/initiator system, prepared by dispersing the graphite in the acetone/Pyr-D solution, which was dried after the sonication process. DSC and X-ray diffraction measurements evidenced the stereocomplexation of the systems synthesized by using the pyrene-based initiators, whose extent turned out to depend on the PDLA chain length. All the prepared nanocomposites - including those synthesized starting from a classical initiator, that is 1-dodecanol - retained similar electrical conductivity, whereas the thermal conductivity was found to increase in the stereocomplexed samples. Preferential localization of stereocomplexed PLA close to the interface with GNP was demonstrated by Scanning Probe Microscopy (SPM) techniques, supporting for an important role of local crystallinity in the thermal conductivity of the nanocomposites.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Decoupled trends for electrical and thermal conductivity in phase-confined CNT co-continuous blends
Authors:
Samuele Colonna,
Zhidong Han,
Alberto Fina
Abstract:
In the present work, the morphology and the electrical and thermal conduction properties of co-continuous poly(vinylidene fluoride) (PVDF), maleated polypropylene (PPgMA) and multiwall carbon nanotubes (CNT) nanostructured blends are investigated. CNT preferentially locates in the PPgMA phase and clearly causes a refinement in the co-continuous structure. Electrical conductivity experiments show t…
▽ More
In the present work, the morphology and the electrical and thermal conduction properties of co-continuous poly(vinylidene fluoride) (PVDF), maleated polypropylene (PPgMA) and multiwall carbon nanotubes (CNT) nanostructured blends are investigated. CNT preferentially locates in the PPgMA phase and clearly causes a refinement in the co-continuous structure. Electrical conductivity experiments show that nanocomposites are well above the percolation threshold and evidence for one order of magnitude enhancement in conductivity for the co-continuous nanocomposites compared to the monophasic nanocomposites with the same CNT volume fraction. On the other hand, thermal diffusivity enhancement for the co-continuous blends is found lower than that for the monophasic nanocomposites at the same CNT volume fraction. An explanation is proposed in terms of large interfacial area, causing phonon scattering at the interface between immiscible PVDF and PPgMA domains. Results described in this paper open the way to the preparation of high electrical and low thermal conductivity materials with possible application as thermoelectrics.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Temperature driven phase transition at the antimonene/Bi2Se3 van der Waals heterostructure
Authors:
Conor Hogan,
Kris Holtgrewe,
Fabio Ronci,
Stefano Colonna,
Simone Sanna,
Paolo Moras,
Polina Sheverdyaeva,
Sanjoy Mahatha,
Marco Papagno,
Ziya S. Aliev,
Mohammad B. Babanly,
Evgeni V. Chulkov,
Carlo Carbone,
Roberto Flammini
Abstract:
We report the discovery of a temperature induced phase transition between the αand βstructures of antimonene. When antimony is deposited at room temperature on bismuth selenide, it forms domains of α-antimonene having different orientations with respect to the substrate. During a mild annealing, the βphase grows and prevails over the αphase, eventually forming a single domain that perfectly matche…
▽ More
We report the discovery of a temperature induced phase transition between the αand βstructures of antimonene. When antimony is deposited at room temperature on bismuth selenide, it forms domains of α-antimonene having different orientations with respect to the substrate. During a mild annealing, the βphase grows and prevails over the αphase, eventually forming a single domain that perfectly matches the surface lattice structure of bismuth selenide. First principles thermodynamics calculations of this van der Waals heterostructure explain the different temperature-dependent stability of the two phases and reveal a minimum energy transition path. Although the formation energies of free-standing α- and β-antimonene only slightly differ, the βphase is ultimately favoured in the annealed heterostructure due to an increased interaction with the substrate mediated by the perfect lattice match.
△ Less
Submitted 5 June, 2019;
originally announced June 2019.
-
Thermally and Electrically Conductive Nanopapers from Reduced Graphene Oxide: effect of nanoflakes thermal annealing on the film structure and properties
Authors:
Maria del Mar Bernal,
Mauro Tortello,
Samuele Colonnaa,
Guido Saracco,
Alberto Fina
Abstract:
In this study, we report a different strategy to prepare graphene nanopapers from direct vacuum filtration. Instead of the conventional method, i.e. thermal annealing nanopapers at extremely high temperatures prepared from graphene oxide (GO) or partially reduced GO, we fabricate our graphene nanopapers directly from suspensions of fully reduced graphene oxide (RGO), obtained after RGO and thermal…
▽ More
In this study, we report a different strategy to prepare graphene nanopapers from direct vacuum filtration. Instead of the conventional method, i.e. thermal annealing nanopapers at extremely high temperatures prepared from graphene oxide (GO) or partially reduced GO, we fabricate our graphene nanopapers directly from suspensions of fully reduced graphene oxide (RGO), obtained after RGO and thermally annealing at 1700 °C in vacuum. By using this approach, we studied the effect of thermal annealing on the physical properties of the macroscopic graphene-based papers. Indeed, we demonstrated that the enhancement of the thermal and electrical properties of graphene nanopapers prepared from annealed RGO is strongly influenced by the absence of oxygen functionalities and the morphology of the nanoflakes. Hence, our methodology can be considered as a valid alternative to the classical approach.
△ Less
Submitted 26 October, 2017;
originally announced October 2017.
-
Super nucleation and orientation of poly (butylene terephthalate) crystals in nanocomposites containing highly reduced graphene oxide
Authors:
Samuele Colonna,
Ricardo A. Pérez,
Haiming Chen,
Guoming Liu,
Du** Wang,
Alejandro J. Mueller,
Guido Saracco,
Alberto Fina
Abstract:
The ring opening polymerization of cyclic butylene terephthalate into poly (butylene terephthalate) (pCBT) in the presence of reduced graphene oxide (RGO) is an effective method for the preparation of polymer nanocomposites. The inclusion of RGO nanoflakes dramatically affects the crystallization of pCBT, shifting crystallization peak temperature to higher temperatures and, overall, increasing the…
▽ More
The ring opening polymerization of cyclic butylene terephthalate into poly (butylene terephthalate) (pCBT) in the presence of reduced graphene oxide (RGO) is an effective method for the preparation of polymer nanocomposites. The inclusion of RGO nanoflakes dramatically affects the crystallization of pCBT, shifting crystallization peak temperature to higher temperatures and, overall, increasing the crystallization rate. This was due to a super nucleating effect caused by RGO, which is maximized by highly reduced graphene oxide. Furthermore, combined analyses by differential scanning calorimetry (DSC) experiments and wide angle X-ray diffraction (WAXS) showed the formation of a thick α-crystalline form pCBT lamellae with a melting point of ~250 °C, close to the equilibrium melting temperature of pCBT. WAXS also demonstrated the pair orientation of pCBT crystals with RGO nanoflakes, indicating a strong interfacial interaction between the aromatic rings of pCBT and RGO planes, especially with highly reduced graphene oxide. Such surface self-organization of the polymer onto the RGO nanoflakes may be exploited for the enhancement of interfacial properties in their polymer nanocomposites.
△ Less
Submitted 26 October, 2017;
originally announced October 2017.
-
Morphology and properties evolution upon ring-opening polymerization during extrusion of cyclic butylene terephthalate and graphene-related-materials into thermally conductive nanocomposites
Authors:
S. Colonna,
O. Monticelli,
J. Gomez,
G. Saracco,
A. Fina
Abstract:
In this work, the study of thermal conductivity before and after in-situ ring-opening polymerization of cyclic butylene terephthalate into poly (butylene terephthalate) in presence of graphene-related materials (GRM) is addressed, to gain insight in the modification of nanocomposites morphology upon polymerization. Five types of GRM were used: one type of graphite nanoplatelets, two different grad…
▽ More
In this work, the study of thermal conductivity before and after in-situ ring-opening polymerization of cyclic butylene terephthalate into poly (butylene terephthalate) in presence of graphene-related materials (GRM) is addressed, to gain insight in the modification of nanocomposites morphology upon polymerization. Five types of GRM were used: one type of graphite nanoplatelets, two different grades of reduced graphene oxide (rGO) and the same rGO grades after thermal annealing for 1 hour at 1700°C under vacuum to reduce their defectiveness. Polymerization of CBT into pCBT, morphology and nanoparticle organization were investigated by means of differential scanning calorimetry, electron microscopy and rheology. Electrical and thermal properties were investigated by means of volumetric resistivity and bulk thermal conductivity measurement. In particular, the reduction of nanoflake aspect ratio during ring-opening polymerization was found to have a detrimental effect on both electrical and thermal conductivities in nanocomposites.
△ Less
Submitted 7 June, 2017; v1 submitted 2 March, 2017;
originally announced March 2017.
-
Effect of processing conditions on the thermal and electrical conductivity of poly (butylene terephthalate) nanocomposites prepared via ring-opening polymerization
Authors:
S. Colonna,
M. M. Bernal,
G. Gavoci,
J. Gomez,
C. Novara,
G. Saracco,
A. Fina
Abstract:
Successful preparation of polymer nanocomposites, exploiting graphene-related materials, via melt mixing technology requires precise design, optimization and control of processing. In the present work, the effect of different processing parameters during the preparation of poly (butylene terephthalate) nanocomposites, through ring-opening polymerization of cyclic butylene terephthalate in presence…
▽ More
Successful preparation of polymer nanocomposites, exploiting graphene-related materials, via melt mixing technology requires precise design, optimization and control of processing. In the present work, the effect of different processing parameters during the preparation of poly (butylene terephthalate) nanocomposites, through ring-opening polymerization of cyclic butylene terephthalate in presence of graphite nanoplatelets (GNP), was thoroughly addressed. Processing temperature (240°C or 260°C), extrusion time (5 or 10 minutes) and shear rate (50 or 100 rpm) were varied by means of a full factorial design of experiment approach, leading to the preparation of polybutylene terephthalate/GNP nanocomposite in 8 different processing conditions. Morphology and quality of GNP were investigated by means of electron microscopy, X-ray photoelectron spectroscopy, thermogravimetry and Raman spectroscopy. Molecular weight of the polymer matrix in nanocomposites and nanoflake dispersion were experimentally determined as a function of the different processing conditions. The effect of transformation parameters on electrical and thermal properties was studied by means of electrical and thermal conductivity measurement. Heat and charge transport performance evidenced a clear correlation with the dispersion and fragmentation of the GNP nanoflakes; in particular, gentle processing conditions (low shear rate, short mixing time) turned out to be the most favourable condition to obtain high conductivity values.
△ Less
Submitted 7 June, 2017; v1 submitted 2 March, 2017;
originally announced March 2017.
-
Effect of morphology and defectiveness of graphene-related materials on the electrical and thermal conductivity of their polymer nanocomposites
Authors:
S. Colonna,
O. Monticelli,
J. Gomez,
C. Novara,
G. Saracco,
A. Fina
Abstract:
In this work, electrically and thermally conductive poly (butylene terephthalate) nanocomposites were prepared by in-situ ring-opening polymerization of cyclic butylene terephthalate (CBT) in presence of a tin-based catalyst. One type of graphite nanoplatelets (GNP) and two different grades of reduced graphene oxide (rGO) were used. Furthermore, high temperature annealing treatment under vacuum at…
▽ More
In this work, electrically and thermally conductive poly (butylene terephthalate) nanocomposites were prepared by in-situ ring-opening polymerization of cyclic butylene terephthalate (CBT) in presence of a tin-based catalyst. One type of graphite nanoplatelets (GNP) and two different grades of reduced graphene oxide (rGO) were used. Furthermore, high temperature annealing treatment under vacuum at 1700°C was carried out on both RGO to reduce their defectiveness and study the correlation between the electrical/thermal properties of the nanocomposites and the nanoflakes structure/defectiveness. The morphology and quality of the nanomaterials were investigated by means of electron microscopy, x-ray photoelectron spectroscopy, thermogravimetry and Raman spectroscopy. Thermal, mechanical and electrical properties of the nanocomposites were investigated by means of rheology, dynamic mechanical thermal analysis, volumetric resistivity and thermal conductivity measurements. Physical properties of nanocomposites were correlated with the structure and defectiveness of nanoflakes, evidencing a strong dependence of properties on nanoflakes structure and defectiveness. In particular, a significant enhancement of both thermal and electrical conductivities was demonstrated upon the reduction of nanoflakes defectiveness.
△ Less
Submitted 26 October, 2016; v1 submitted 6 September, 2016;
originally announced September 2016.
-
Effect of thermal annealing on the heat transfer properties of reduced graphite oxide flakes: a nanoscale characterization via scanning thermal microscopy
Authors:
M. Tortello,
S. Colonna,
M. Bernal,
J. Gomez,
M. Pavese,
C. Novara,
F. Giorgis,
M. Maggio,
G. Guerra,
G. Saracco,
R. S. Gonnelli,
A. Fina
Abstract:
This paper reports on the thermal properties of reduced graphite oxide (RGO) flakes, studied by means of scanning thermal microscopy (SThM). This technique was demonstrated to allow thermal characterization of the flakes with a spatial resolution of the order of a few tens of nanometers, while recording nanoscale topography at the same time. Several individual RGO flakes were analyzed by SThM, bot…
▽ More
This paper reports on the thermal properties of reduced graphite oxide (RGO) flakes, studied by means of scanning thermal microscopy (SThM). This technique was demonstrated to allow thermal characterization of the flakes with a spatial resolution of the order of a few tens of nanometers, while recording nanoscale topography at the same time. Several individual RGO flakes were analyzed by SThM, both as obtained after conventional thermal reduction and after a subsequent annealing at 1700°C. Significant differences in the thermal maps were observed between pristine and annealed flakes, reflecting higher heat dissipation on annealed RGO flakes compared with pristine ones. This result was correlated with the reduction of RGO structure defectiveness. In particular, a substantial reduction of oxidized groups and sp3 carbons upon annealing was proven by X-ray photoelectron and Raman spectroscopies, while the increase of crystalline order was demonstrated by X-ray diffraction, in terms of higher correlation lengths both along and perpendicular to the graphene planes. Results presented in this paper provide experimental evidence for the qualitative correlation between the defectiveness of graphene-related materials and their thermal conductivity, which is clearly crucial for the exploitation of these materials into thermally conductive nanocomposites.
△ Less
Submitted 15 September, 2016; v1 submitted 4 September, 2016;
originally announced September 2016.
-
First-principles calculations and bias-dependent STM measurements at the alpha-Sn/Ge(111) surface: a clear indication for the 1U2D configuration
Authors:
P. Gori,
F. Ronci,
S. Colonna,
A. Cricenti,
O. Pulci,
G. Le Lay
Abstract:
The nature of the alpha-Sn/Ge(111) surface is still a matter of debate. In particular, two possible configurations have been proposed for the 3x3 ground state of this surface: one with two Sn adatoms in a lower position with respect to the third one (1U2D) and the other with opposite configuration (2U1D). By means of first-principles quasiparticle calculations we could simulate STM images as a f…
▽ More
The nature of the alpha-Sn/Ge(111) surface is still a matter of debate. In particular, two possible configurations have been proposed for the 3x3 ground state of this surface: one with two Sn adatoms in a lower position with respect to the third one (1U2D) and the other with opposite configuration (2U1D). By means of first-principles quasiparticle calculations we could simulate STM images as a function of bias voltage and compare them with STM experimental results at 78K, obtaining an unambiguous indication that the stable configuration for the alpha-Sn/Ge(111) surface is the 1U2D. The possible inequivalence of the two down Sn adatoms is also discussed.
△ Less
Submitted 2 April, 2008;
originally announced April 2008.
