-
ForceSight: Text-Guided Mobile Manipulation with Visual-Force Goals
Authors:
Jeremy A. Collins,
Cody Houff,
You Liang Tan,
Charles C. Kemp
Abstract:
We present ForceSight, a system for text-guided mobile manipulation that predicts visual-force goals using a deep neural network. Given a single RGBD image combined with a text prompt, ForceSight determines a target end-effector pose in the camera frame (kinematic goal) and the associated forces (force goal). Together, these two components form a visual-force goal. Prior work has demonstrated that…
▽ More
We present ForceSight, a system for text-guided mobile manipulation that predicts visual-force goals using a deep neural network. Given a single RGBD image combined with a text prompt, ForceSight determines a target end-effector pose in the camera frame (kinematic goal) and the associated forces (force goal). Together, these two components form a visual-force goal. Prior work has demonstrated that deep models outputting human-interpretable kinematic goals can enable dexterous manipulation by real robots. Forces are critical to manipulation, yet have typically been relegated to lower-level execution in these systems. When deployed on a mobile manipulator equipped with an eye-in-hand RGBD camera, ForceSight performed tasks such as precision grasps, drawer opening, and object handovers with an 81% success rate in unseen environments with object instances that differed significantly from the training data. In a separate experiment, relying exclusively on visual servoing and ignoring force goals dropped the success rate from 90% to 45%, demonstrating that force goals can significantly enhance performance. The appendix, videos, code, and trained models are available at https://force-sight.github.io/.
△ Less
Submitted 23 September, 2023; v1 submitted 21 September, 2023;
originally announced September 2023.
-
Visual Contact Pressure Estimation for Grippers in the Wild
Authors:
Jeremy A. Collins,
Cody Houff,
Patrick Grady,
Charles C. Kemp
Abstract:
Sensing contact pressure applied by a gripper can benefit autonomous and teleoperated robotic manipulation, but adding tactile sensors to a gripper's surface can be difficult or impractical. If a gripper visibly deforms, contact pressure can be visually estimated using images from an external camera that observes the gripper. While researchers have demonstrated this capability in controlled labora…
▽ More
Sensing contact pressure applied by a gripper can benefit autonomous and teleoperated robotic manipulation, but adding tactile sensors to a gripper's surface can be difficult or impractical. If a gripper visibly deforms, contact pressure can be visually estimated using images from an external camera that observes the gripper. While researchers have demonstrated this capability in controlled laboratory settings, prior work has not addressed challenges associated with visual pressure estimation in the wild, where lighting, surfaces, and other factors vary widely. We present a model and associated methods that enable visual pressure estimation under widely varying conditions. Our model, Visual Pressure Estimation for Robots (ViPER), takes an image from an eye-in-hand camera as input and outputs an image representing the pressure applied by a soft gripper. Our key insight is that force/torque sensing can be used as a weak label to efficiently collect training data in settings where pressure measurements would be difficult to obtain. When trained on this weakly labeled data combined with fully labeled data that includes pressure measurements, ViPER outperforms prior methods, enables precision manipulation in cluttered settings, and provides accurate estimates for unseen conditions relevant to in-home use.
△ Less
Submitted 28 September, 2023; v1 submitted 13 March, 2023;
originally announced March 2023.
-
PressureVision++: Estimating Fingertip Pressure from Diverse RGB Images
Authors:
Patrick Grady,
Jeremy A. Collins,
Chengcheng Tang,
Christopher D. Twigg,
Kunal Aneja,
James Hays,
Charles C. Kemp
Abstract:
Touch plays a fundamental role in manipulation for humans; however, machine perception of contact and pressure typically requires invasive sensors. Recent research has shown that deep models can estimate hand pressure based on a single RGB image. However, evaluations have been limited to controlled settings since collecting diverse data with ground-truth pressure measurements is difficult. We pres…
▽ More
Touch plays a fundamental role in manipulation for humans; however, machine perception of contact and pressure typically requires invasive sensors. Recent research has shown that deep models can estimate hand pressure based on a single RGB image. However, evaluations have been limited to controlled settings since collecting diverse data with ground-truth pressure measurements is difficult. We present a novel approach that enables diverse data to be captured with only an RGB camera and a cooperative participant. Our key insight is that people can be prompted to apply pressure in a certain way, and this prompt can serve as a weak label to supervise models to perform well under varied conditions. We collect a novel dataset with 51 participants making fingertip contact with diverse objects. Our network, PressureVision++, outperforms human annotators and prior work. We also demonstrate an application of PressureVision++ to mixed reality where pressure estimation allows everyday surfaces to be used as arbitrary touch-sensitive interfaces. Code, data, and models are available online.
△ Less
Submitted 3 January, 2024; v1 submitted 5 January, 2023;
originally announced January 2023.
-
Force/Torque Sensing for Soft Grippers using an External Camera
Authors:
Jeremy A. Collins,
Patrick Grady,
Charles C. Kemp
Abstract:
Robotic manipulation can benefit from wrist-mounted force/torque (F/T) sensors, but conventional F/T sensors can be expensive, difficult to install, and damaged by high loads. We present Visual Force/Torque Sensing (VFTS), a method that visually estimates the 6-axis F/T measurement that would be reported by a conventional F/T sensor. In contrast to approaches that sense loads using internal camera…
▽ More
Robotic manipulation can benefit from wrist-mounted force/torque (F/T) sensors, but conventional F/T sensors can be expensive, difficult to install, and damaged by high loads. We present Visual Force/Torque Sensing (VFTS), a method that visually estimates the 6-axis F/T measurement that would be reported by a conventional F/T sensor. In contrast to approaches that sense loads using internal cameras placed behind soft exterior surfaces, our approach uses an external camera with a fisheye lens that observes a soft gripper. VFTS includes a deep learning model that takes a single RGB image as input and outputs a 6-axis F/T estimate. We trained the model with sensor data collected while teleoperating a robot (Stretch RE1 from Hello Robot Inc.) to perform manipulation tasks. VFTS outperformed F/T estimates based on motor currents, generalized to a novel home environment, and supported three autonomous tasks relevant to healthcare: gras** a blanket, pulling a blanket over a manikin, and cleaning a manikin's limbs. VFTS also performed well with a manually operated pneumatic gripper. Overall, our results suggest that an external camera observing a soft gripper can perform useful visual force/torque sensing for a variety of manipulation tasks.
△ Less
Submitted 7 May, 2023; v1 submitted 30 September, 2022;
originally announced October 2022.
-
Visual Pressure Estimation and Control for Soft Robotic Grippers
Authors:
Patrick Grady,
Jeremy A. Collins,
Samarth Brahmbhatt,
Christopher D. Twigg,
Chengcheng Tang,
James Hays,
Charles C. Kemp
Abstract:
Soft robotic grippers facilitate contact-rich manipulation, including robust gras** of varied objects. Yet the beneficial compliance of a soft gripper also results in significant deformation that can make precision manipulation challenging. We present visual pressure estimation & control (VPEC), a method that infers pressure applied by a soft gripper using an RGB image from an external camera. W…
▽ More
Soft robotic grippers facilitate contact-rich manipulation, including robust gras** of varied objects. Yet the beneficial compliance of a soft gripper also results in significant deformation that can make precision manipulation challenging. We present visual pressure estimation & control (VPEC), a method that infers pressure applied by a soft gripper using an RGB image from an external camera. We provide results for visual pressure inference when a pneumatic gripper and a tendon-actuated gripper make contact with a flat surface. We also show that VPEC enables precision manipulation via closed-loop control of inferred pressure images. In our evaluation, a mobile manipulator (Stretch RE1 from Hello Robot) uses visual servoing to make contact at a desired pressure; follow a spatial pressure trajectory; and grasp small low-profile objects, including a microSD card, a penny, and a pill. Overall, our results show that visual estimates of applied pressure can enable a soft gripper to perform precision manipulation.
△ Less
Submitted 9 August, 2022; v1 submitted 14 April, 2022;
originally announced April 2022.
-
CORRECT: Code Reviewer Recommendation at GitHub for Vendasta Technologies
Authors:
Mohammad Masudur Rahman,
Chanchal K. Roy,
Jesse Redl,
Jason A. Collins
Abstract:
Peer code review locates common coding standard violations and simple logical errors in the early phases of software development, and thus, reduces overall cost. Unfortunately, at GitHub, identifying an appropriate code reviewer for a pull request is challenging given that reliable information for reviewer identification is often not readily available. In this paper, we propose a code reviewer rec…
▽ More
Peer code review locates common coding standard violations and simple logical errors in the early phases of software development, and thus, reduces overall cost. Unfortunately, at GitHub, identifying an appropriate code reviewer for a pull request is challenging given that reliable information for reviewer identification is often not readily available. In this paper, we propose a code reviewer recommendation tool--CORRECT--that considers not only the relevant cross-project work experience (e.g., external library experience) of a developer but also her experience in certain specialized technologies (e.g., Google App Engine) associated with a pull request for determining her expertise as a potential code reviewer. We design our tool using client-server architecture, and then package the solution as a Google Chrome plug-in. Once the developer initiates a new pull request at GitHub, our tool automatically analyzes the request, mines two relevant histories, and then returns a ranked list of appropriate code reviewers for the request within the browser's context.
Demo: https://www.youtube.com/watch?v=rXU1wTD6QQ0
△ Less
Submitted 9 July, 2018;
originally announced July 2018.
-
CORRECT: Code Reviewer Recommendation in GitHub Based on Cross-Project and Technology Experience
Authors:
Mohammad Masudur Rahman,
Chanchal K. Roy,
Jason A. Collins
Abstract:
Peer code review locates common coding rule violations and simple logical errors in the early phases of software development, and thus reduces overall cost. However, in GitHub, identifying an appropriate code reviewer for a pull request is a non-trivial task given that reliable information for reviewer identification is often not readily available. In this paper, we propose a code reviewer recomme…
▽ More
Peer code review locates common coding rule violations and simple logical errors in the early phases of software development, and thus reduces overall cost. However, in GitHub, identifying an appropriate code reviewer for a pull request is a non-trivial task given that reliable information for reviewer identification is often not readily available. In this paper, we propose a code reviewer recommendation technique that considers not only the relevant cross-project work history (e.g., external library experience) but also the experience of a developer in certain specialized technologies associated with a pull request for determining her expertise as a potential code reviewer. We first motivate our technique using an exploratory study with 10 commercial projects and 10 associated libraries external to those projects. Experiments using 17,115 pull requests from 10 commercial projects and six open source projects show that our technique provides 85%--92% recommendation accuracy, about 86% precision and 79%--81% recall in code reviewer recommendation, which are highly promising. Comparison with the state-of-the-art technique also validates the empirical findings and the superiority of our recommendation technique.
△ Less
Submitted 9 July, 2018;
originally announced July 2018.
-
Hubble Space Telescope Survey of Interstellar High-Velocity Si III
Authors:
Joseph A. Collins,
Michael Shull,
Mark L. Giroux
Abstract:
We describe an ultraviolet spectroscopic survey of interstellar high-velocity cloud (HVC) absorption in the strong 1206.500 Angstrom line of Si III using the Space Telescope Imaging Spectrograph aboard the Hubble Space Telescope. Because the Si III line is 4-5 times stronger than O VI 1031.926, it provides a sensitive probe of ionized gas down to column densities N(Si III) = 5x10^11 cm^-2 at Si…
▽ More
We describe an ultraviolet spectroscopic survey of interstellar high-velocity cloud (HVC) absorption in the strong 1206.500 Angstrom line of Si III using the Space Telescope Imaging Spectrograph aboard the Hubble Space Telescope. Because the Si III line is 4-5 times stronger than O VI 1031.926, it provides a sensitive probe of ionized gas down to column densities N(Si III) = 5x10^11 cm^-2 at Si III equivalent width 10 mA. We detect high-velocity Si III over (91+/-4)% of the sky (53 of 58 sight lines), and 59% of the HVCs show negative LSR velocities. Per sight line, the mean HVC column density is <log N(SiIII)> = 13.19 +/- 0.45, while the mean for all 90 velocity components is 12.92 +/- 0.46. Lower limits due to Si III line saturation are included in this average, so the actual mean/median values are even higher. The Si III appears to trace an extensive ionized component of Galactic halo gas at temperatures 10^4.0 K to 10^4.5 K indicative of a cooling flow. Photoionization models suggest that typical Si III absorbers with 12.5 < log N(Si III) < 13.5 have total hydrogen column densities N(H) = 10^18 to 10^19 cm^-2 for gas of hydrogen density n(H) = 0.1 cm^(-3) and 10% solar metallicity. With typical neutral fractions N(HI)/N(H) = 0.01, these HVCs may elude even long duration 21-cm observations at Arecibo, the EVLA, and other radio facilities. However, if Si III is associated with higher density gas, n(H) > 1 cm^(-3), the corresponding neutral hydrogen could be visible in deep observations. This reservoir of ionized gas may contain 10^8 M_sun and produce a mass infall rate of 1 M_sun/yr to the Galactic disk.
△ Less
Submitted 26 September, 2009;
originally announced September 2009.
-
A Large Reservoir of Ionized Gas in the Galactic Halo: Ionized Silicon in High-Velocity and Intermediate-Velocity Clouds
Authors:
J. Michael Shull,
Jennifer R. Jones,
Charles W. Danforth,
Joseph A. Collins
Abstract:
The low Galactic halo is enveloped by a sheath of ionized, low-metallicity gas, which can provide a substantial (1 M_sun/yr) cooling inflow to replenish star formation in the disk. Using absorption spectra from the HST and FUSE toward 37 active galactic nuclei at high latitude, we detect widespread interstellar SiIII 1206.5 absorption: 61 high-velocity clouds (HVCs) along 30 sight lines and 22 i…
▽ More
The low Galactic halo is enveloped by a sheath of ionized, low-metallicity gas, which can provide a substantial (1 M_sun/yr) cooling inflow to replenish star formation in the disk. Using absorption spectra from the HST and FUSE toward 37 active galactic nuclei at high latitude, we detect widespread interstellar SiIII 1206.5 absorption: 61 high-velocity clouds (HVCs) along 30 sight lines and 22 intermediate-velocity clouds (IVCs) along 20 sight lines. We find a segregation of redshifted and blueshifted absorbers across the Galactic rotation axis at l=180, consistent with a lag in the rotation velocity above the Galactic plane. The HVC sky coverage is large (81+-5% for 30/37 directions) with SiIII optical depth typically 4-5 times that of OVI 1032. The mean HVC column density per sight line, <log N_SiIII>=13.42+-0.21, corresponds to total column density N_HII~6x10^18)/(Z_Si/0.2Z_sun) of ionized low-metallicity gas, similar to that inferred in OVI. This reservoir could total 10^8 M_sun and produce a mass infall rate ~1 M_sun/yr. By modeling SiII, SiIII, SiIV, and HI in a subset of absorbers, we constrain the mean photoionization parameter in the low halo, <log U> = -3.0 (+0.3,-0.4), approximately ten times lower than observed in the low-redshift intergalactic medium. The metallicities in some HVCs, derived from [SiII/HI], are 10-30% solar, whereas values found from all three silicon ions are lower in the pure-photoionization models. Thse formally lower metallicities are highly uncertain, since some of the higher ions may be collisionally ionized. The mean Si metallicities, <logZ_Si/Z_sun)>= -2.1(+1.1,-0.3) in 17 HVCs and -1.0(+0.6,-1.0) in 19 IVCs, are somewhat uncertain owing to ionization modeling, but consistent with the median photometric metallicity, [Fe/H]=-1.46+-0.30, for ~2e5 halo F/G stars in SDSS.
△ Less
Submitted 13 May, 2009; v1 submitted 30 April, 2009;
originally announced April 2009.
-
Metallicity and Ionization in High Velocity Cloud Complex C
Authors:
J. A. Collins,
J. M. Shull,
M. L. Giroux
Abstract:
We analyze HST and FUSE ultraviolet spectroscopic data for eleven sight lines passing through the infalling high velocity cloud (HVC) Complex C. These sight lines pass through regions with HI column densities ranging from N(HI) = 10^(18.1) to 10^(20.1). From [OI/HI] abundances, we find that Complex C metallicities range from 0.09 to 0.29 Z_solar, with a column density weighted mean of 0.13 Z_sol…
▽ More
We analyze HST and FUSE ultraviolet spectroscopic data for eleven sight lines passing through the infalling high velocity cloud (HVC) Complex C. These sight lines pass through regions with HI column densities ranging from N(HI) = 10^(18.1) to 10^(20.1). From [OI/HI] abundances, we find that Complex C metallicities range from 0.09 to 0.29 Z_solar, with a column density weighted mean of 0.13 Z_solar. Nitrogen (NI) is underabundant by factors of (0.01-0.07) (N/H)_solar, significantly less than oxygen relative to solar abundances. This pattern suggests nucleosynthetic enrichment by Type II SNe, consistent with an origin in the Galactic fountain or infalling gas produced in winds from Local Group galaxies. The range of metallicity and its possible (2 sigma) dependence on N(HI) could indicate some mixing of primordial material with enriched gas from the Milky Way, but the mixing mechanism is unclear. We also investigate the significant highly ionized component of Complex C, detected in CIV, SiIV, and OVI, but not in NV. High-ion column density ratios show little variance and are consistent with shock ionization or ionization at interfaces between Complex C and a hotter surrounding medium. Evidence for the former mechanism is seen in the Mrk 876 line profiles, where the offset in line centroids between low and high ions suggests a decelerating bowshock.
△ Less
Submitted 24 October, 2006;
originally announced October 2006.
-
Imaging Fabry-Perot Spectroscopy of NGC 5775: Kinematics of the Diffuse Ionized Gas Halo
Authors:
G. H. Heald,
R. J. Rand,
R. A. Benjamin,
J. A. Collins,
J. Bland-Hawthorn
Abstract:
We present imaging Fabry-Perot observations of Halpha emission in the nearly edge-on spiral galaxy NGC 5775. We have derived a rotation curve and a radial density profile along the major axis by examining position-velocity (PV) diagrams from the Fabry-Perot data cube as well as a CO 2-1 data cube from the literature. PV diagrams constructed parallel to the major axis are used to examine changes…
▽ More
We present imaging Fabry-Perot observations of Halpha emission in the nearly edge-on spiral galaxy NGC 5775. We have derived a rotation curve and a radial density profile along the major axis by examining position-velocity (PV) diagrams from the Fabry-Perot data cube as well as a CO 2-1 data cube from the literature. PV diagrams constructed parallel to the major axis are used to examine changes in azimuthal velocity as a function of height above the midplane. The results of this analysis reveal the presence of a vertical gradient in azimuthal velocity. The magnitude of this gradient is approximately 1 km/s/arcsec, or about 8 km/s/kpc, though a higher value of the gradient may be appropriate in localized regions of the halo. The evidence for an azimuthal velocity gradient is much stronger for the approaching half of the galaxy, although earlier slit spectra are consistent with a gradient on both sides. There is evidence for an outward radial redistribution of gas in the halo. The form of the rotation curve may also change with height, but this is not certain. We compare these results with those of an entirely ballistic model of a disk-halo flow. The model predicts a vertical gradient in azimuthal velocity which is shallower than the observed gradient, indicating that an additional mechanism is required to further slow the rotation speeds in the halo.
△ Less
Submitted 8 September, 2005;
originally announced September 2005.
-
Highly Ionized High-Velocity Clouds: Hot Intergalactic Medium or Galactic Halo?
Authors:
J. A. Collins,
J. M. Shull,
M. L. Giroux
Abstract:
We use spectroscopic data from HST and FUSE to study the wide range of ionization states of the "highly ionized high-velocity clouds". Studied extensively in OVI absorption, these clouds are usually assumed to be infalling gas in the Galactic halo at distances less than 50 kpc. An alternative model attributes the OVI (and OVII X-ray absorption) to cosmological structures of low-density, shock-he…
▽ More
We use spectroscopic data from HST and FUSE to study the wide range of ionization states of the "highly ionized high-velocity clouds". Studied extensively in OVI absorption, these clouds are usually assumed to be infalling gas in the Galactic halo at distances less than 50 kpc. An alternative model attributes the OVI (and OVII X-ray absorption) to cosmological structures of low-density, shock-heated intergalactic gas, distributed over 1-3 Mpc surrounding the Milky Way. The latter interpretation is unlikely, owing to the enormous required mass of gas (4x10^12 M_solar). Our detection, in 9 of 12 sight lines, of low ionization stages (CII/III/IV; SiII/III/IV) at similar high velocities as OVI requires gas densities far above that (n_H=5x10^-6 cm^-3) associated with the warm-hot intergalactic medium (WHIM). These HVCs are probably cooling, multiphase gas in the Galactic halo, bow-shocks and interfaces between clouds falling through a hot, rotating gaseous halo. The velocity segregation of these HVCs in Galactic coordinates is consistent with a pattern in which infalling clouds reflect the sense of Galactic rotation, with peculiar velocities superposed.
△ Less
Submitted 14 January, 2005; v1 submitted 4 January, 2005;
originally announced January 2005.
-
Kinematics of the Ionized Halo of NGC 5775
Authors:
G. H. Heald,
R. J. Rand,
R. A. Benjamin,
J. A. Collins,
J. Bland-Hawthorn
Abstract:
Studies of the kinematics of gaseous halos in some spiral galaxies have shown that the rotational velocity of the gas decreases with height above the midplane (z). This vertical velocity gradient has been observed in both the neutral and ionized components of halos. We present imaging Fabry-Perot Halpha observations of the edge-on galaxy NGC 5775. These observations allow us to study the variati…
▽ More
Studies of the kinematics of gaseous halos in some spiral galaxies have shown that the rotational velocity of the gas decreases with height above the midplane (z). This vertical velocity gradient has been observed in both the neutral and ionized components of halos. We present imaging Fabry-Perot Halpha observations of the edge-on galaxy NGC 5775. These observations allow us to study the variation in the rotation curve (and, to some extent, the radial profile) of the ionized gas component as a function of z. We have used an iterative technique to infer the major axis rotation curve from the ionized gas observations as well as CO data. A preliminary analysis of position-velocity (PV) diagrams parallel to the major axis implies the presence of a vertical velocity gradient. The magnitude of this gradient is tentatively found to be ~2 km/s/arcsec, consistent with the results of Rand (2000) and Tullmann et al. (2000).
△ Less
Submitted 17 September, 2004;
originally announced September 2004.
-
Highly Ionized High-Velocity Clouds toward PKS 2155-304 and Markarian 509
Authors:
J. A. Collins,
J. M. Shull,
M. L. Giroux
Abstract:
To gain insight into four highly ionized high-velocity clouds (HVCs) discovered by Sembach et al. (1999), we have analyzed data from the Hubble Space Telescope (HST) and Far Ultraviolet Spectroscopic Explorer (FUSE) for the PKS 2155-304 and Mrk 509 sight lines. We measure strong absorption in OVI and column densities of multiple ionization stages of silicon (SiII/III/IV) and carbon (CII/III/IV).…
▽ More
To gain insight into four highly ionized high-velocity clouds (HVCs) discovered by Sembach et al. (1999), we have analyzed data from the Hubble Space Telescope (HST) and Far Ultraviolet Spectroscopic Explorer (FUSE) for the PKS 2155-304 and Mrk 509 sight lines. We measure strong absorption in OVI and column densities of multiple ionization stages of silicon (SiII/III/IV) and carbon (CII/III/IV). We interpret this ionization pattern as a multiphase medium that contains both collisionally ionized and photoionized gas. Toward PKS 2155-304, for HVCs at -140 and -270 km/s, respectively, we measure logN(OVI)=13.80+/-0.03 and log N(OVI)=13.56+/-0.06; from Lyman series absorption, we find log N(HI)=16.37^(+0.22)_(-0.14) and 15.23^(+0.38)_(-0.22). The presence of high-velocity OVI spread over a broad (100 km/s) profile, together with large amounts of low-ionization species, is difficult to reconcile with the low densities, n=5x10^(-6) cm^(-3), in the collisional/photoionization models of Nicastro et al. (2002), although the HVCs show a similar relation in N(SiIV)/N(CIV) versus N(CII)/N(CIV) as high-z intergalactic clouds. Our results suggest that the high-velocity OVI in these absorbers do not necessarily trace the WHIM, but instead may trace HVCs with low total hydrogen column density. We propose that the broad high-velocity OVI absorption arises from shock ionization, at bowshock interfaces produced from infalling clumps of gas with velocity shear. The similar ratios of high ions for HVC Complex C and these highly ionized HVCs suggest a common production mechanism in the Galactic halo.
△ Less
Submitted 31 December, 2003; v1 submitted 3 December, 2003;
originally announced December 2003.
-
A Survey of FUSE and HST Sightlines through High-Velocity Cloud Complex C
Authors:
J. A. Collins,
J. M. Shull,
M. L. Giroux
Abstract:
Using archival Far Ultraviolet Spectroscopic Explorer (FUSE) and Hubble Space Telescope (HST) data, we have assembled a survey of eight sightlines through high-velocity cloud Complex C. Abundances of the observed ion species vary significantly for these sightlines, indicating that Complex C is not well characterized by a single metallicity. Reliable metallicities based on [OI/HI] range from 0.1-…
▽ More
Using archival Far Ultraviolet Spectroscopic Explorer (FUSE) and Hubble Space Telescope (HST) data, we have assembled a survey of eight sightlines through high-velocity cloud Complex C. Abundances of the observed ion species vary significantly for these sightlines, indicating that Complex C is not well characterized by a single metallicity. Reliable metallicities based on [OI/HI] range from 0.1-0.25 solar. Metallicities based on [SII/HI] range from 0.1-0.6 solar, but the trend of decreasing abundance with HI column density indicates that photoionization corrections may affect the conversion to [S/H]. We present models of the dependence of the ionization correction on HI column density; these ionization corrections are significant when converting ion abundances to elemental abundances for S, Si, and Fe. The measured abundances in this survey indicate that parts of the cloud have a higher metallicity than previously thought and that Complex C may represent a mixture of ``Galactic fountain'' gas with infalling low-metallicity gas. We find that [S/O] and [Si/O] have a solar ratio, suggesting little dust depletion. Further, the measured abundances suggest an over-abundance of O, S, and Si relative to N and Fe. The enhancement of these alpha-elements suggests that the bulk of the metals in Complex C were produced by Type II supernovae and then removed from the star-forming region, possibly via supernovae-driven winds or tidal strip**, before the ISM could be enriched by N and Fe.
△ Less
Submitted 4 November, 2002; v1 submitted 11 September, 2002;
originally announced September 2002.
-
Kinematics of Diffuse Ionized Gas Halos: A Ballistic Model of Halo Rotation
Authors:
J. A. Collins,
R. A. Benjamin,
R. J. Rand
Abstract:
To better understand diffuse ionized gas kinematics and halo rotation in spiral galaxies, we have developed a model in which clouds are ejected from the disk and follow ballistic trajectories through the halo. The behavior of clouds in this model has been investigated thoroughly through a parameter space search and a study of individual cloud orbits. Synthetic velocity profiles have been generat…
▽ More
To better understand diffuse ionized gas kinematics and halo rotation in spiral galaxies, we have developed a model in which clouds are ejected from the disk and follow ballistic trajectories through the halo. The behavior of clouds in this model has been investigated thoroughly through a parameter space search and a study of individual cloud orbits. Synthetic velocity profiles have been generated in z (height above the plane) from the models for the purpose of comparing with velocity centroid data from previously obtained long-slit spectra of the edge-on spirals NGC 891 (one slit) and NGC 5775 (two slits). In each case, a purely ballistic model is insufficient in explaining observed DIG kinematics. In the case of NGC 891, the observed vertical velocity gradient is not as steep as predicted by the model, possibly suggesting a source of coupling between disk and halo rotation or an outwardly directed pressure gradient. The ballistic model more successfully explains DIG kinematics observed in NGC 5775; however, it cannot explain the observed trend of high-z gas velocities nearly reaching the systemic velocity. Such behavior can be attributed to either an inwardly directed pressure gradient or a possible tidal interaction with its companion, NGC 5774. In addition, the ballistic model predicts that clouds move radially outward as they cycle through the halo. The mass and energy fluxes estimated from the model suggest this radially outward gas migration leads to a redistribution of material that may significantly affect the evolution of the ISM.
△ Less
Submitted 12 June, 2002;
originally announced June 2002.
-
Ionization Sources and Physical Conditions in the Diffuse Ionized Gas Halos of Four Edge-On Galaxies
Authors:
Joseph A. Collins,
Richard J. Rand
Abstract:
Deep long-slit spectra of the diffuse ionized gas halos of the edge-on spiral galaxies NGC 4302 and UGC 10288 are presented. These data, along with previously presented data for NGC 5775 and NGC 891, are used to address the issue of how DIG halos are energized. Composite photo-ionization/shock models are generally better at explaining runs of line ratios in these galaxies than photo-ionization m…
▽ More
Deep long-slit spectra of the diffuse ionized gas halos of the edge-on spiral galaxies NGC 4302 and UGC 10288 are presented. These data, along with previously presented data for NGC 5775 and NGC 891, are used to address the issue of how DIG halos are energized. Composite photo-ionization/shock models are generally better at explaining runs of line ratios in these galaxies than photo-ionization models alone. Models of line ratios in NGC 5775 require a greater contribution from shocks for filamentary regions than for non-filamentary regions to explain the run of [OIII]/Halpha. In either case, the [SII]/[NII] ratio is not well fit by the models. Composite models for UGC 10288 are successful at reproducing the run of [SII]/[NII] for all but the the highest values of [NII]/Halpha; however, the run of [OIII]/Halpha vs. [NII]/Halpha does not show any discernible trend, making it difficult to determine whether or not shocks make a contribution.
We also examine whether the data can be explained simply by an increase in temperature with z in a pure photo-ionization model. Runs of [SII]/Halpha, [NII]/Halpha, and [SII]/[NII] in each of the four galaxies are consistent with such an increase. However, the runs of [OIII]/Halpha vs. z in NGC 5775 and UGC 10288 require unusually high ionization fractions of O^{++} that can not be explained without invoking a secondary ionization source or at the very least a much higher temperature for the [OIII]-emitting component than for the [SII]- and [NII]-emitting component. An increase in temperature with z is generally more successful at explaining the [OIII]/Halpha run in NGC 891.
△ Less
Submitted 1 December, 2000; v1 submitted 29 November, 2000;
originally announced November 2000.