Showing 1–50 of 145 results for author: Collins, D

The influence of dislocations on R-phase transformations in a NiTi shape memory alloy

Authors: Himanshu Vashishtha, David M. Collins

Abstract: The ability to control the stress-induced phase transformation of the shape memory alloy, NiTi, is an important technological challenge that must be understood for their wide application in devices that can exploit their reversible strain properties. This study elucidates the direct relationship between dislocation density and the \textit{R}-phase transformation, including its formation temperatur… ▽ More The ability to control the stress-induced phase transformation of the shape memory alloy, NiTi, is an important technological challenge that must be understood for their wide application in devices that can exploit their reversible strain properties. This study elucidates the direct relationship between dislocation density and the \textit{R}-phase transformation, including its formation temperature from interrupted annealing of rolled NiTi samples. Deformation is shown to determine the enthalpy change required for the B2$\rightarrow$\textit{R}-phase transformation, with associated transformation temperatures being modifiable via dislocation density and recovery processes. Recovery is shown to be rapid, highly heterogeneous and sensitive to crystal orientation. Grains with a $\langle100\rangle$ direction close to the macroscopic rolling direction recover more rapidly than $\langle110\rangle$ and $\langle111\rangle$ orientated grains. Considered to be governed by processing induced residual stresses and resultant crystallographic dependent annihilation/slip pathways, there are opportunities to tune B2$\rightarrow$\textit{R}-phase transformation on either a grain-averaged or an orientation dependant per-grain basis. △ Less

Submitted 18 June, 2024; originally announced June 2024.

A micromechanical study of heat treatment induced hardening in α-brass

Authors: Jonathan Birch, Emily Jenkins, Anastasia Vrettou, Mohammed Said, Himanshu Vashishtha, Thomas Connolley, Jeff Brooks, David M. Collins

Abstract: The mechanisms that govern a previously unexplained hardening effect of a single phase Cu-30wt%Zn α-brass after heating have been investigated. After cold-work, the alloy possesses an increased yield strength and hardening rate only when heat treated to temperatures close to 220{^\circ}C, and is otherwise softer. Crystallographic texture and microstructure, explored using electron backscatter diff… ▽ More The mechanisms that govern a previously unexplained hardening effect of a single phase Cu-30wt%Zn α-brass after heating have been investigated. After cold-work, the alloy possesses an increased yield strength and hardening rate only when heat treated to temperatures close to 220{^\circ}C, and is otherwise softer. Crystallographic texture and microstructure, explored using electron backscatter diffraction (EBSD), describe the deformation heterogeneity including twin development, as a function of heat treatment. When heated, an increased area fraction of deformation twins is observed, with dimensions reaching a critical size that maximises the resistance to dislocation slip in the parent grains. The effect is shown to dominate over other alloy characteristics including short range order, giving serrated yielding during tensile testing which is mostly eliminated after heating. In-situ X-ray diffraction during tensile testing corroborates these findings; dislocation-related line broadening and lattice strain development between as worked and heated α-brass is directly related to the interaction between the dislocations and the population of deformation twins. The experiments unambiguously disprove that other thermally-induced microstructure features contribute to thermal hardening. Specifically, the presence of recrystallised grains or second phases do not play a role. As these heat treatments match annealing conditions subjected to α-brass during deformation-related manufacturing processes, the results here are considered critical to understand, predict and exploit, where appropriate, any beneficial process-induced structural behaviour. △ Less

Submitted 14 June, 2024; originally announced June 2024.

ML-based handover prediction over a real O-RAN deployment using RAN Intelligent controller

Authors: Merim Dzaferagic, Bruno Missi Xavier, Diarmuid Collins, Vince D'Onofrio, Magnos Martinello, Marco Ruffini

Abstract: O-RAN introduces intelligent and flexible network control in all parts of the network. The use of controllers with open interfaces allow us to gather real time network measurements and make intelligent/informed decision. The work in this paper focuses on develo** a use-case for open and reconfigurable networks to investigate the possibility to predict handover events and understand the value of… ▽ More O-RAN introduces intelligent and flexible network control in all parts of the network. The use of controllers with open interfaces allow us to gather real time network measurements and make intelligent/informed decision. The work in this paper focuses on develo** a use-case for open and reconfigurable networks to investigate the possibility to predict handover events and understand the value of such predictions for all stakeholders that rely on the communication network to conduct their business. We propose a Long-Short Term Memory Machine Learning approach that takes standard Radio Access Network measurements to predict handover events. The models were trained on real network data collected from a commercial O-RAN setup deployed in our OpenIreland testbed. Our results show that the proposed approach can be optimized for either recall or precision, depending on the defined application level objective. We also link the performance of the Machine Learning (ML) algorithm to the network operation cost. Our results show that ML-based matching between the required and available resources can reduce operational cost by more than 80%, compared to long term resource purchases. △ Less

Submitted 14 April, 2024; originally announced April 2024.

Analyzing and Exploring Training Recipes for Large-Scale Transformer-Based Weather Prediction

Authors: Jared D. Willard, Peter Harrington, Shashank Subramanian, Ankur Mahesh, Travis A. O'Brien, William D. Collins

Abstract: The rapid rise of deep learning (DL) in numerical weather prediction (NWP) has led to a proliferation of models which forecast atmospheric variables with comparable or superior skill than traditional physics-based NWP. However, among these leading DL models, there is a wide variance in both the training settings and architecture used. Further, the lack of thorough ablation studies makes it hard to… ▽ More The rapid rise of deep learning (DL) in numerical weather prediction (NWP) has led to a proliferation of models which forecast atmospheric variables with comparable or superior skill than traditional physics-based NWP. However, among these leading DL models, there is a wide variance in both the training settings and architecture used. Further, the lack of thorough ablation studies makes it hard to discern which components are most critical to success. In this work, we show that it is possible to attain high forecast skill even with relatively off-the-shelf architectures, simple training procedures, and moderate compute budgets. Specifically, we train a minimally modified SwinV2 transformer on ERA5 data, and find that it attains superior forecast skill when compared against IFS. We present some ablations on key aspects of the training pipeline, exploring different loss functions, model sizes and depths, and multi-step fine-tuning to investigate their effect. We also examine the model performance with metrics beyond the typical ACC and RMSE, and investigate how the performance scales with model size. △ Less

Submitted 30 April, 2024; originally announced April 2024.

Comments: 9 pages, 6 figures

MSC Class: 68T07; 86A10 ACM Class: J.2; I.2.6

Journal ref: 23rd Conference on Artificial Intelligence for Environmental Science. Jan 2024. Abstract #437874

Conservation Laws For Every Quantum Measurement Outcome

Authors: Daniel Collins, Sandu Popescu

Abstract: In the paradigmatic example of quantum measurements, whenever one measures a system which starts in a superposition of two states of a conserved quantity, it jumps to one of the two states, implying different final values for the quantity that should have been conserved. The standard law of conservation for quantum mechanics handles this jump by stating only that the total distribution of the cons… ▽ More In the paradigmatic example of quantum measurements, whenever one measures a system which starts in a superposition of two states of a conserved quantity, it jumps to one of the two states, implying different final values for the quantity that should have been conserved. The standard law of conservation for quantum mechanics handles this jump by stating only that the total distribution of the conserved quantity over repeated measurements is unchanged, but states nothing about individual cases. Here however we show that one can go beyond this and have conservation in each individual instance. We made our arguments in the case of angular momentum of a particle on a circle, where many technicalities simplify, and bring arguments to show that this holds in full generality. Hence we argue that the conservation law in quantum mechanics should be rewritten, to go beyond its hitherto statistical formulation, to state that the total of a conserved quantity is unchanged in every individual measurement outcome. As a further crucial element, we show that conservation can be localised at the level of the system of interest and its relevant frame of reference, and is independent on any assumptions on the distribution of the conserved quantity over the entire universe. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: 8 pages, 1 table

Planck dust polarization power spectra are consistent with strongly supersonic turbulence

Authors: Kye A. Stalpes, David C. Collins, Kevin M. Huffenberger

Abstract: The polarization of the Cosmic Microwave Background (CMB) is rich in information but obscured by foreground emission from the Milky Way's interstellar medium (ISM). To uncover relationships between the underlying turbulent ISM and the foreground power spectra, we simulated a suite of driven, magnetized, turbulent models of the ISM, varying the fluid properties via the sonic Mach number,… ▽ More The polarization of the Cosmic Microwave Background (CMB) is rich in information but obscured by foreground emission from the Milky Way's interstellar medium (ISM). To uncover relationships between the underlying turbulent ISM and the foreground power spectra, we simulated a suite of driven, magnetized, turbulent models of the ISM, varying the fluid properties via the sonic Mach number, $\mathcal{M_S}$ and magnetic (Alfvén) Mach number,$\mathcal{M_A}$. We measure the power spectra of density ($ρ$), velocity ($v$), magnetic field ($H$), total projected intensity ($T$), parity-even polarization ($E$), and parity-odd polarization ($B$). We find that the slopes of all six quantities increase with $\mathcal{M_S}$ Most increase with $\mathcal{M_A}$, while the magnetic field spectrum steepens with $M_A$. By comparing spectral slopes of $E$ and $B$ to those measured by Planck, we infer typical values of $\mathcal{M_S}$ and $\mathcal{M_A}$ for the ISM. As the fluid velocity increases, $\mathcal{M_S}> 4$, the ratio of BB power to EE power increases to approach a constant value near the Planck-observed value of $\sim 0.5$, regardless of the magnetic field strength. We also examine correlation-coefficients between projected quantities, and find that $r^{\rm{TE}}\approx 0.3$, in agreement with Planck, for appropriate combinations of $\mathcal{M_S}$ and $\mathcal{M_A}$. Finally, we consider parity-violating correlations $r^{\rm{TB}}$ and $r^{\rm{EB}}.$ △ Less

Submitted 10 June, 2024; v1 submitted 3 April, 2024; originally announced April 2024.

Dynamic Interface Printing

Authors: Callum Vidler, Michael Halwes, Kirill Kolesnik, Philipp Segeritz, Matthew Mail, Anders J. Barlow, Emmanuelle M. Koehl, Anand Ramakrishnan, Daniel J. Scott, Daniel E. Heath, Kenneth B. Crozier, David J. Collins

Abstract: Additive manufacturing is an expanding multidisciplinary field encompassing applications including medical devices, aerospace components, microfabrication strategies, and artificial organs. Among additive manufacturing approaches, light-based printing technologies, including two-photon polymerization, projection micro stereolithography, and volumetric printing, have garnered significant attention… ▽ More Additive manufacturing is an expanding multidisciplinary field encompassing applications including medical devices, aerospace components, microfabrication strategies, and artificial organs. Among additive manufacturing approaches, light-based printing technologies, including two-photon polymerization, projection micro stereolithography, and volumetric printing, have garnered significant attention due to their speed, resolution and/or potential applications for biofabrication. In this study, we introduce dynamic interface printing (DIP), a new 3D printing approach that leverages an acoustically modulated, constrained air-liquid boundary to rapidly generate cm-scale three-dimensional structures within tens of seconds. Distinct from volumetric approaches, this process eliminates the need for intricate feedback systems, specialized chemistry, or complex optics while maintaining rapid printing speeds. We demonstrate the versatility of this technique across a broad array of materials and intricate geometries, including those that would be impossible to print via conventional layer-by-layer methods. In doing so, we demonstrate the rapid fabrication of complex structures in-situ, overprinting, structural parallelisation, and biofabrication utility. Moreover, we showcase that the formation of surface waves at this boundary enables enhanced mass transport, material flexibility, and permits three-dimensional particle patterning. We therefore anticipate that this approach will be invaluable for applications where high resolution, scalable throughput, and biocompatible printing is required. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Comments: 63 Pages, 4 Figures, 18 Supplementary Figures

A method for characterizing disease emergence curves from paired pathogen detection and serology data

Authors: Joshua Hewitt, Grete Wilson-Henjum, Derek T. Collins, Jourdan M. Ringenberg, Christopher A. Quintanal, Robert Pleszewski, Jeffrey C. Chandler, Thomas J. DeLiberto, Kim M. Pepin

Abstract: Wildlife disease surveillance programs and research studies track infection and identify risk factors for wild populations, humans, and agriculture. Often, several types of samples are collected from individuals to provide more complete information about an animal's infection history. Methods that jointly analyze multiple data streams to study disease emergence and drivers of infection via epidemi… ▽ More Wildlife disease surveillance programs and research studies track infection and identify risk factors for wild populations, humans, and agriculture. Often, several types of samples are collected from individuals to provide more complete information about an animal's infection history. Methods that jointly analyze multiple data streams to study disease emergence and drivers of infection via epidemiological process models remain underdeveloped. Joint-analysis methods can more thoroughly analyze all available data, more precisely quantifying epidemic processes, outbreak status, and risks. We contribute a paired data modeling approach that analyzes multiple samples from individuals. We use "characterization maps" to link paired data to epidemiological processes through a hierarchical statistical observation model. Our approach can provide both Bayesian and frequentist estimates of epidemiological parameters and state. We motivate our approach through the need to use paired pathogen and antibody detection tests to estimate parameters and infection trajectories for the widely applicable susceptible, infectious, recovered (SIR) model. We contribute general formulas to link characterization maps to arbitrary process models and datasets and an extended SIR model that better accommodates paired data. We find via simulation that paired data can more efficiently estimate SIR parameters than unpaired data, requiring samples from 5-10 times fewer individuals. We then study SARS-CoV-2 in wild White-tailed deer (Odocoileus virginianus) from three counties in the United States. Estimates for average infectious times corroborate captive animal studies. Our methods use general statistical theory to let applications extend beyond the SIR model we consider, and to more complicated examples of paired data. △ Less

Submitted 13 May, 2024; v1 submitted 18 January, 2024; originally announced January 2024.

Comments: 22 pages, 5 figures, 1 table

Statistics of Energy in Isothermal Supersonic Turbulence

Authors: Branislav Rabatin, David C. Collins

Abstract: Turbulence is a key process in many astrophysical systems. In this work we explore the statistics of thermal and kinetic energy of isothermal, supersonic, turbulent gas. We develop analytic formulas for the PDF of thermal and kinetic energies and their joint PDF. We compare these analytical models with a suite of simulations with a fixed resolution of $1024^3$ cells across 4 different Mach numbers… ▽ More Turbulence is a key process in many astrophysical systems. In this work we explore the statistics of thermal and kinetic energy of isothermal, supersonic, turbulent gas. We develop analytic formulas for the PDF of thermal and kinetic energies and their joint PDF. We compare these analytical models with a suite of simulations with a fixed resolution of $1024^3$ cells across 4 different Mach numbers (1, 2, 4, 8) and three different driving patterns (compressive, mixed, solenoidal). We discover an interesting jump discontinuity in the thermal energy PDF, which carries onto the joint PDF. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Microscale stress-geometry interactions in an additively manufactured NiTi cardiovascular stent: A synchrotron dual imaging tomography and diffraction study

Authors: Himanshu Vashishtha, Parastoo Jamshidi, Anastasia Vrettou, Anna Kareer, Michael Goode, Hans Deyhle, Andrew James, Sharif Ahmad, Christina Reinhard, Moataz M. Attallah, David M. Collins

Abstract: This study explores cardiovascular stents fabricated using laser powder bed fusion (LPBF); an emerging method to offer patient-specific customisable parts. Here, the shape memory alloy NiTi, in a near equiatomic composition, was investigated to deconvolve the material response from macroscopic component effects. Specifically, stress-geometry interactions were revealed, in-situ, for a minaturised c… ▽ More This study explores cardiovascular stents fabricated using laser powder bed fusion (LPBF); an emerging method to offer patient-specific customisable parts. Here, the shape memory alloy NiTi, in a near equiatomic composition, was investigated to deconvolve the material response from macroscopic component effects. Specifically, stress-geometry interactions were revealed, in-situ, for a minaturised cardiovascular stent subjected to an externally applied cylindrical stress whilst acquiring synchrotron X-ray imaging and diffraction data. The approach enabled the collection of spatially resolved micromechanical deformation data; the formation of stress-induced martensite and R-phase was evident, occurring in locations near junctions between stent ligaments where stress concentrations exist. In the as-fabricated condition, hardness maps were obtained through nanoindentation, demonstrating that the localised deformation and deformation patterning is further controlled by porosity and microstructural heterogeneity. Electron backscatter diffraction (EBSD) supported these observations, showing a finer grain structure near stent junctions with higher associated lattice curvature. These features, combined with stress concentrations when loaded will initiate localised phase transformations. If the stent was subjected to repeated loading, representing in-vivo conditions, these regions would be susceptible to cyclic damage through transformation memory loss, leading to premature component failure. This study highlights the challenges that must be addressed for the post-processing treatment of LABF-processed stents for healthcare-related applications. △ Less

Submitted 12 December, 2023; originally announced December 2023.

Grain-level effects on in-situ deformation-induced phase transformations in a complex-phase steel using 3DXRD and EBSD

Authors: James A. D. Ball, Claire Davis, Carl Slater, Himanshu Vashishtha, Mohammed Said, Louis Hébrard, Florian Steinhilber, Jonathan P. Wright, Thomas Connolley, Stefan Michalik, David M. Collins

Abstract: A novel complex-phase steel alloy is conceived with a deliberately unstable austenite, $γ$, phase that enables the deformation-induced martensitic transformations (DIMT) to be explored at low levels of plastic strain. The DIMT was thus explored, in-situ and non-destructively, using both far-field Three-Dimensional X-Ray Diffraction (3DXRD) and Electron Back-Scatter Diffraction (EBSD). Substantial… ▽ More A novel complex-phase steel alloy is conceived with a deliberately unstable austenite, $γ$, phase that enables the deformation-induced martensitic transformations (DIMT) to be explored at low levels of plastic strain. The DIMT was thus explored, in-situ and non-destructively, using both far-field Three-Dimensional X-Ray Diffraction (3DXRD) and Electron Back-Scatter Diffraction (EBSD). Substantial $α'$ martensite formation was observed under 10% applied strain with EBSD, and many $\varepsilon$ grain formation events were captured with 3DXRD, indicative of the indirect transformation of martensite via the reaction $γ\rightarrow \varepsilon \rightarrow α'$. Using $\varepsilon$ grain formation as a direct measurement of $γ$ grain stability, the influence of several microstructural properties, such as grain size, orientation and neighbourhood configuration, on $γ$ stability have been identified. Larger $γ$ grains were found to be less stable than smaller grains. Any $γ$ grains oriented with {100} parallel to the loading direction preferentially transformed with lower stresses. Parent $\varepsilon$-forming $γ$ grains possessed a neighbourhood with increased ferritic/martensitic volume fraction. This finding shows, unambiguously, that $α$/$α'$ promotes $\varepsilon$ formation in neighbouring grains. The minimum strain work criterion model for $\varepsilon$ variant prediction was also evaluated, which worked well for most grains. However, $\varepsilon$-forming grains with a lower stress were less well predicted by the model, indicating crystal-level behaviour must be considered for accurate $\varepsilon$ formation. The findings from this work are considered key for the future design of alloys where the deformation response can be controlled by tailoring microstructure and local or macroscopic crystal orientations. △ Less

Submitted 7 November, 2023; v1 submitted 6 November, 2023; originally announced November 2023.

Comments: 20 pages, 3 supplementary pages, 14 figures, 3 supplementary figures. Preprint submitted to Acta Materialia. Updated to correct Figure 14

Journal ref: Acta Materialia 265 (2024) 119608

Angular Momentum Flows without anything carrying it

Authors: Yakir Aharonov, Daniel Collins, Sandu Popescu

Abstract: Transfer of conserved quantities between two remote regions is generally assumed to be a rather trivial process: a flux of particles carrying the conserved quantities propagates from one region to another. We however demonstrate a flow of angular momentum from one region to another across a region of space in which there is a vanishingly small probability of any particles (or fields) being present… ▽ More Transfer of conserved quantities between two remote regions is generally assumed to be a rather trivial process: a flux of particles carrying the conserved quantities propagates from one region to another. We however demonstrate a flow of angular momentum from one region to another across a region of space in which there is a vanishingly small probability of any particles (or fields) being present. This shows that the usual view of how conservation laws work needs to be revisited. △ Less

Submitted 11 July, 2024; v1 submitted 11 October, 2023; originally announced October 2023.

Comments: V4: 8 Pages, 2 Figures, minor improvements

Hessian-based Similarity Metric for Multimodal Medical Image Registration

Authors: Mohammadreza Eskandari, Houssem-Eddine Gueziri, D. Louis Collins

Abstract: One of the fundamental elements of both traditional and certain deep learning medical image registration algorithms is measuring the similarity/dissimilarity between two images. In this work, we propose an analytical solution for measuring similarity between two different medical image modalities based on the Hessian of their intensities. First, assuming a functional dependence between the intensi… ▽ More One of the fundamental elements of both traditional and certain deep learning medical image registration algorithms is measuring the similarity/dissimilarity between two images. In this work, we propose an analytical solution for measuring similarity between two different medical image modalities based on the Hessian of their intensities. First, assuming a functional dependence between the intensities of two perfectly corresponding patches, we investigate how their Hessians relate to each other. Secondly, we suggest a closed-form expression to quantify the deviation from this relationship, given arbitrary pairs of image patches. We propose a geometrical interpretation of the new similarity metric and an efficient implementation for registration. We demonstrate the robustness of the metric to intensity nonuniformities using synthetic bias fields. By integrating the new metric in an affine registration framework, we evaluate its performance for MRI and ultrasound registration in the context of image-guided neurosurgery using target registration error and computation time. △ Less

Submitted 6 October, 2023; originally announced October 2023.

Ultrafast In vivo Transient Absorption Spectroscopy

Authors: Tomi K. Baikie, Darius Kosmützky, Joshua M. Lawrence, Victor Gray, Christoph Schnedermann, Robin Horton, Joel D. Collins, Hitesh Medipally, Bartosz Witek, Marc M. Nowaczyk, Jenny Zhang, Laura Wey, Christopher J. Howe, Akshay Rao

Abstract: Transient absorption (TA) spectroscopy has proved fundamental to our understanding of energy and charge transfer in biological systems, allowing measurements of photoactive proteins on sub-picosecond timescales. Recently, ultrafast TA spectroscopy has been applied in vivo, providing sub-picosecond measurements of photosynthetic light harvesting and electron transfer processes within living photosy… ▽ More Transient absorption (TA) spectroscopy has proved fundamental to our understanding of energy and charge transfer in biological systems, allowing measurements of photoactive proteins on sub-picosecond timescales. Recently, ultrafast TA spectroscopy has been applied in vivo, providing sub-picosecond measurements of photosynthetic light harvesting and electron transfer processes within living photosynthetic microorganisms. The analysis of the resultant data is hindered by the number of different photoactive pigments and the associated complexity of photoactive reaction schemes within living cells. Here we show how in vivo ultrafast TA spectroscopy can be applied to a diverse array of organisms from the tree of life, both photosynthetic and non-photosynthetic. We have developed a series of software tools for performing global, lifetime and target analysis of in vivo TA datasets. These advances establish in vivo TA spectroscopy as a versatile technique for studying energy and charge transfer in living systems. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: 39 pages

Density and Velocity Correlations in Isothermal Supersonic Turbulence

Authors: Branislav Rabatin, David C. Collins

Abstract: In star-forming clouds, high velocity flow gives rise to large fluctuations of density. In this work we explore the correlation between velocity magnitude (speed) and density. We develop an analytic formula for the joint probability distribution (PDF) of density and speed, and discuss its properties. In order to develop an accurate model for the joint PDF, we first develop improved models of the m… ▽ More In star-forming clouds, high velocity flow gives rise to large fluctuations of density. In this work we explore the correlation between velocity magnitude (speed) and density. We develop an analytic formula for the joint probability distribution (PDF) of density and speed, and discuss its properties. In order to develop an accurate model for the joint PDF, we first develop improved models of the marginalized distributions of density and speed. We confront our results with a suite of 12 supersonic isothermal simulations with resolution of $1024^3$ cells in which the turbulence is driven by 3 different forcing modes (solenoidal, mixed and compressive) and 4 r.m.s. Mach numbers (1, 2, 4, 8). We show, that for transsonic turbulence, density and speed are correlated to a considerable degree and the simple assumption of independence fails to accurately describe their statistics. In the supersonic regime, the correlations tend to weaken with growing Mach number. Our new model of the joint and marginalized PDFs are a factor of 3 better than uncorrelated, and provides insight into this important process. △ Less

Submitted 10 July, 2023; originally announced July 2023.

Comments: Submitted to MNRAS

Registration between DCT and EBSD datasets for multiphase microstructures

Authors: James A. D. Ball, Jette Oddershede, Claire Davis, Carl Slater, Mohammed Said, Himanshu Vashishtha, Stefan Michalik, David M. Collins

Abstract: The ability to characterise the three-dimensional microstructure of multiphase materials is essential for understanding the interaction between phases and associated materials properties. Here, laboratory-based diffraction-contrast tomography (DCT), a recently-established materials characterization technique that can determine grain phases, morphologies, positions and orientations in a voxel-based… ▽ More The ability to characterise the three-dimensional microstructure of multiphase materials is essential for understanding the interaction between phases and associated materials properties. Here, laboratory-based diffraction-contrast tomography (DCT), a recently-established materials characterization technique that can determine grain phases, morphologies, positions and orientations in a voxel-based reconstruction method, was used to map part of a dual-phase steel alloy sample. To assess the resulting microstructures that were produced by the DCT technique, an EBSD map was collected within the same sample volume. To identify the 2D slice of the 3D DCT reconstruction that best corresponded to the EBSD map, a novel registration technique based solely on grain-averaged orientations was developed -- this registration technique requires very little a priori knowledge of dataset alignment and can be extended to other techniques that only recover grain-averaged orientation data such as far-field 3D X-ray diffraction microscopy. Once the corresponding 2D slice was identified in the DCT dataset, comparisons of phase balance, grain size, shape and texture were performed between DCT and EBSD techniques. More complicated aspects of the microstructural morphology such as grain boundary shape and grains less than a critical size were poorly reproduced by the DCT reconstruction, primarily due to the difference in resolutions of the technique compared with EBSD. However, lab-based DCT is shown to accurately determine the centre-of-mass position, orientation, and size of the large grains for each phase present, austenite and martensitic ferrite. The results reveals a complex ferrite grain network of similar crystal orientations that are absent from the EBSD dataset. Such detail demonstrates that lab-based DCT, as a technique, shows great promise in the field of multi-phase material characterization. △ Less

Submitted 29 June, 2023; originally announced June 2023.

Comments: 15 pages, 11 figures. Preprint submitted to Materials Characterization

Journal ref: Materials Characterization, October 2023, Volume 204, Page 113228

Collapsing molecular clouds with tracer particles: Part II, Collapse Histories

Authors: David C. Collins, Dan K. Le, Luz L. Jimenez Vela

Abstract: In order to develop a complete theory of star formation, one essentially needs to know two things: what collapses, and how long it takes. This is the second paper in a series, where we query how long a parcel of gas takes to collapse and the process it undergoes. We embed pseudo-Lagrangian tracer particles in simulations of collapsing molecular clouds, identify the particles that end in dense knot… ▽ More In order to develop a complete theory of star formation, one essentially needs to know two things: what collapses, and how long it takes. This is the second paper in a series, where we query how long a parcel of gas takes to collapse and the process it undergoes. We embed pseudo-Lagrangian tracer particles in simulations of collapsing molecular clouds, identify the particles that end in dense knots, and then examine the collapse history of the gas. We find a nearly universal behavior of cruise-then-collapse, wherein a core stays at intermediate densities for a significant fraction of its life before finally collapsing. We identify time immediately before each core collapses, $t_{\rm{sing}}$, and examine how it transitions to high density. We find that the time to collapse is uniformly distributed between $0.25 t_{\rm{ff}}$ and the end of the simulation at $\sim 1 t_{\rm{ff}}$, and that the duration of collapse is universally short, $Δt \sim 0.1 t_{\rm{ff}}$, where $t_{\rm{ff}}$ is the free-fall time at the mean density. We describe the collapse in three stages; collection, hardening, and singularity. Collection sweeps low density gas into moderate density. Hardening brings kinetic and gravitational energies into quasi-equipartition. Singularity is the free-fall collapse, forming an envelope in rough energy balance and central over density in $\sim 0.1 t_{\rm{ff}}$. △ Less

Submitted 12 June, 2024; v1 submitted 17 June, 2023; originally announced June 2023.

Social Value Orientation and Integral Emotions in Multi-Agent Systems

Authors: Daniel Collins, Conor Houghton, Nirav Ajmeri

Abstract: Human social behavior is influenced by individual differences in social preferences. Social value orientation (SVO) is a measurable personality trait which indicates the relative importance an individual places on their own and on others' welfare when making decisions. SVO and other individual difference variables are strong predictors of human behavior and social outcomes. However, there are tran… ▽ More Human social behavior is influenced by individual differences in social preferences. Social value orientation (SVO) is a measurable personality trait which indicates the relative importance an individual places on their own and on others' welfare when making decisions. SVO and other individual difference variables are strong predictors of human behavior and social outcomes. However, there are transient changes human behavior associated with emotions that are not captured by individual differences alone. Integral emotions, the emotions which arise in direct response to a decision-making scenario, have been linked to temporary shifts in decision-making preferences. In this work, we investigated the effects of moderating social preferences with integral emotions in multi-agent societies. We developed Svoie, a method for designing agents which make decisions based on established SVO policies, as well as alternative integral emotion policies in response to task outcomes. We conducted simulation experiments in a resource-sharing task environment, and compared societies of Svoie agents with societies of agents with fixed SVO policies. We find that societies of agents which adapt their behavior through integral emotions achieved similar collective welfare to societies of agents with fixed SVO policies, but with significantly reduced inequality between the welfare of agents with different SVO traits. We observed that by allowing agents to change their policy in response to task outcomes, agents can moderate their behavior to achieve greater social equality. \end{abstract} △ Less

Submitted 9 May, 2023; originally announced May 2023.

Comments: 21 pages, 2 figures, accepted at COINE 2023

Classical-to-quantum non-signalling boxes

Authors: Carolina Moreira Ferrera, Robin Simmons, James Purcell, Daniel Collins, Sandu Popescu

Abstract: Here we introduce the concept of classical input - quantum output (C-Q) non-signalling boxes, a generalisation of the classical input - classical output (C-C) non-signalling boxes. We argue that studying such objects leads to a better understanding of the relation between quantum nonlocality and non-locality beyond quantum mechanics. The main issue discussed in the paper is whether there exist 'ge… ▽ More Here we introduce the concept of classical input - quantum output (C-Q) non-signalling boxes, a generalisation of the classical input - classical output (C-C) non-signalling boxes. We argue that studying such objects leads to a better understanding of the relation between quantum nonlocality and non-locality beyond quantum mechanics. The main issue discussed in the paper is whether there exist 'genuine' C-Q boxes or all C-Q boxes can be built from objects already known, namely C-C boxes acting on pre-shared entangled quantum particles. We show that large classes of C-Q boxes are non-genuine. In particular, we show that all bi-partite C-Q boxes with outputs that are pure states are non-genuine. We also present various strategies for addressing the general problem, i.e. for multi-partite C-Q boxes which output mixed states, whose answer is still open. Finally, we show that even some very simple non-genuine C-Q boxes require large amounts of C-C nonlocal correlations in order to simulate them. △ Less

Submitted 25 April, 2024; v1 submitted 30 March, 2023; originally announced March 2023.

Comments: 14 pages, 3 figures, 1 table, improved presentation and more detailed proofs

Teleportation of Post-Selected Quantum States

Authors: Daniel Collins

Abstract: Teleportation allows Alice to send a pre-prepared quantum state to Bob using only pre-shared entanglement and classical communication. Here we show that it is possible to teleport a state which is also $\it{post}$-selected. Post-selection of a state $Φ$ means that after Alice has finished her experiment she performs a measurement and only keeps runs of the experiment where the measurement outcome… ▽ More Teleportation allows Alice to send a pre-prepared quantum state to Bob using only pre-shared entanglement and classical communication. Here we show that it is possible to teleport a state which is also $\it{post}$-selected. Post-selection of a state $Φ$ means that after Alice has finished her experiment she performs a measurement and only keeps runs of the experiment where the measurement outcome is $Φ$. We also demonstrate pre and post-selected $\it{port}$-based teleportation. Finally we use these protocols to perform instantaneous non-local quantum computation on pre and post-selected systems, and significantly reduce the entanglement required to instantaneously measure an arbitrary non-local variable of spatially separated pre and post-selected systems. △ Less

Submitted 6 March, 2024; v1 submitted 22 March, 2023; originally announced March 2023.

Comments: 8 pages, 7 figures, updated version accepted for publication in Quantum

Journal ref: Quantum 8, 1280 (2024)

High Resolution 3D Strain and Orientation Map** within a Grain of a Directed Energy Deposition Laser Additively Manufactured Superalloy

Authors: Y. Chen, Y. T. Tang, D. M. Collins, S. J. Clark, W. Ludwig, R. Rodriguez-Lamas, C. Detlefs, R. C. Reed, P. D. Lee, P. J. Withers, C. Yildirim

Abstract: The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragr… ▽ More The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragranular orientation and strain variations throughout a surface breaking grain within a directed energy deposition nickel superalloy. DFXM results reveal a highly heterogenous 3D microstructure in terms of the local orientation and lattice strain. The grain comprises $\approx$ 5$μ$m-sized cells with alternating strain states, as high as 5 $\times 10^{-3}$, and orientation differences <0.5° . The DFXM results are compared to Electron Backscatter Diffraction measurements of the same grain from its cut-off surface. We discuss the microstructure developments during LAM, rationalising the development of the deformation patterning from the extreme thermal gradients during processing and the susceptibility for solute segregation. △ Less

Submitted 8 March, 2023; originally announced March 2023.

Comments: Corresponding author:[email protected] - Submitted to Scripta Materialia on 8 March2 023

Per-grain and neighbourhood stress interactions during deformation of a ferritic steel obtained using three-dimensional X-ray diffraction

Authors: James A. D. Ball, Anna Kareer, Oxana V. Magdysyuk, Stefan Michalik, Thomas Connolley, David M. Collins

Abstract: Three-dimensional X-ray diffraction (3DXRD) has been used to measure, in-situ, the evolution of $\sim 1800$ grains in a single phase low carbon ferritic steel sample during uniaxial deformation. The distribution of initial residual grain stresses in the material was observed to prevail as plasticity builds, though became less pronounced, and therefore less influential as strain increased. The init… ▽ More Three-dimensional X-ray diffraction (3DXRD) has been used to measure, in-situ, the evolution of $\sim 1800$ grains in a single phase low carbon ferritic steel sample during uniaxial deformation. The distribution of initial residual grain stresses in the material was observed to prevail as plasticity builds, though became less pronounced, and therefore less influential as strain increased. The initial Schmid factor of a grain was found to be strongly correlated to the intergranular stress change and the range of stresses that are permissible; a grain well aligned for easy slip is more likely to exhibit a range of stresses than those orientated poorly for dislocation motion. The orientation path of a grain, however, is not only dependent on its initial orientation, but hypothesised to be influenced by its stress state and the stress state of its grain environment. A grain neighbourhood effect is observed: the Schmid factor of serial adjoining grains influences the stress state of a grain of interest, whereas parallel neighbours are much less influential. This phenomenon is strongest at low plastic strains only, with the effect diminishing as plasticity builds. The influence of initial residual stresses becomes less evident, and grains rotate to eliminate any orientation dependent load shedding. The ability of the BCC ferrite to exhaust such neighbourhood interactions, which would otherwise be detrimental in crystal structures with lower symmetric and fewer slip systems, is considered key to the high ductility possessed by these materials. △ Less

Submitted 21 February, 2023; originally announced February 2023.

Comments: 17 pages (+2 supplementary pages), 13 figures (+3 supplementary figures). Preprint submitted to Acta Materialia

Journal ref: Commun Mater 5, 27 (2024)

Machine Learning-based Early Attack Detection Using Open RAN Intelligent Controller

Authors: Bruno Missi Xavier, Merim Dzaferagic, Diarmuid Collins, Giovanni Comarela, Magnos Martinello, Marco Ruffini

Abstract: We design and demonstrate a method for early detection of Denial-of-Service attacks. The proposed approach takes advantage of the OpenRAN framework to collect measurements from the air interface (for attack detection) and to dynamically control the operation of the Radio Access Network (RAN). For that purpose, we developed our near-Real Time (RT) RAN Intelligent Controller (RIC) interface. We appl… ▽ More We design and demonstrate a method for early detection of Denial-of-Service attacks. The proposed approach takes advantage of the OpenRAN framework to collect measurements from the air interface (for attack detection) and to dynamically control the operation of the Radio Access Network (RAN). For that purpose, we developed our near-Real Time (RT) RAN Intelligent Controller (RIC) interface. We apply and analyze a wide range of Machine Learning algorithms to data traffic analysis that satisfy the accuracy and latency requirements set by the near-RT RIC. Our results show that the proposed framework is able to correctly classify genuine vs. malicious traffic with high accuracy (i.e., 95%) in a realistic testbed environment, allowing us to detect attacks already at the Distributed Unit (DU), before malicious traffic even enters the Centralized Unit (CU). △ Less

Submitted 3 February, 2023; originally announced February 2023.

Analysis and Improvements of the Sender Keys Protocol for Group Messaging

Authors: David Balbás, Daniel Collins, Phillip Gajland

Abstract: Messaging between two parties and in the group setting has enjoyed widespread attention both in practice, and, more recently, from the cryptographic community. One of the main challenges in the area is constructing secure (end-to-end encrypted) and efficient messaging protocols for group conversations. The popular messaging applications WhatsApp and Signal utilise a protocol in which, instead of s… ▽ More Messaging between two parties and in the group setting has enjoyed widespread attention both in practice, and, more recently, from the cryptographic community. One of the main challenges in the area is constructing secure (end-to-end encrypted) and efficient messaging protocols for group conversations. The popular messaging applications WhatsApp and Signal utilise a protocol in which, instead of sharing a single group key, members have individual \textit{sender keys}, which are shared with all other group members. The Sender Keys protocol is claimed to offer forward security guarantees. However, despite its broad adoption in practice, it has never been studied formally in the cryptographic literature. In this paper we present the first analysis of the Sender Keys protocol along with some prospective improvements. To this end, we introduce a new cryptographic primitive, develop a game-based security model, present a security analysis in the passive and active settings, and propose several improvements to the protocol. △ Less

Submitted 24 January, 2023; v1 submitted 17 January, 2023; originally announced January 2023.

Comments: 6 pages. Appears in XVII Reunión española sobre criptología y seguridad de la información - RECSI 2022

Finite shock model of density in supersonic turbulence

Authors: Branislav Rabatin, David C. Collins

Abstract: The probability distribution of density in isothermal, supersonic, turbulent gas is approximately lognormal. This behaviour can be traced back to the shock waves travelling through the medium, which randomly adjust the density by a random factor of the local sonic Mach number squared. Provided a certain parcel of gas experiences a large number of shocks, due to the central limit theorem, the resul… ▽ More The probability distribution of density in isothermal, supersonic, turbulent gas is approximately lognormal. This behaviour can be traced back to the shock waves travelling through the medium, which randomly adjust the density by a random factor of the local sonic Mach number squared. Provided a certain parcel of gas experiences a large number of shocks, due to the central limit theorem, the resulting distribution for density is lognormal. We explore a model in which parcels of gas undergo finite number of shocks before relaxing to the ambient density, causing the distribution for density to deviate from a lognormal. We confront this model with numerical simulations with various r.m.s. Mach numbers ranging from subsonic as low as 0.1 to supersonic at 25. We find that the fits to the finite formula are an order of magnitude better than a lognormal. The model naturally extends even to subsonic flows, where no shocks exist. △ Less

Submitted 19 October, 2022; v1 submitted 7 October, 2022; originally announced October 2022.

Comments: Accepted for publication in MNRAS

Collapsing Molecular Clouds with Tracer Particles: Part I, What Collapses?

Authors: David C. Collins, Dan K. Le, Luz L. Jimenez Vela

Abstract: To understand the formation of stars from clouds of molecular gas, one essentially needs to know two things: What gas collapses, and how long it takes to do so. We address these questions by embedding pseudo-Lagrangian tracer particles in three simulations of self-gravitating turbulence. We identify prestellar cores at the end of the collapse, and use the tracer particles to rewind the simulations… ▽ More To understand the formation of stars from clouds of molecular gas, one essentially needs to know two things: What gas collapses, and how long it takes to do so. We address these questions by embedding pseudo-Lagrangian tracer particles in three simulations of self-gravitating turbulence. We identify prestellar cores at the end of the collapse, and use the tracer particles to rewind the simulations to identify the preimage gas for each core at the beginning of each simulation. This is the first of a series of papers, wherein we present the technique and examine the first question: What gas collapses? For the preimage gas at the t=0, we examine a number of quantities; the probability distribution function (PDF) for several quantities, the structure function for velocity, several length scales, the volume filling fraction, the overlap between different preimages, and fractal dimension of the preimage gas. Analytic descriptions are found for the PDFs of density and velocity for the preimage gas. We find that the preimage of a core is large and sparse, and we show that gas for one core comes from many turbulent density fluctuations and a few velocity fluctuations. We find that binary systems have preimages that overlap in a fractal manner. Finally, we use the density distribution to derive a novel prediction of the star formation rate. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Comments: Accepted for publication in MNRAS

The Periodic Signals of Nova V1674 Herculis (2021)

Authors: Joseph Patterson, Marguerite Epstein-Martin, Josie Enenstein, Jonathan Kemp, Richard Sabo, Walt Cooney, Tonny Vanmunster, Pavol Dubovsky, Franz-Josef Hambsch, Gordon Myers, Damien Lemay, Kirill Sokolovsky, Donald Collins, Tut Campbell, George Roberts, Michael Richmond, Stephen Brincat, Joseph Ulowetz, Shawn Dvorak, Tamas Tordai, Sjoerd Dufoer, Andrew Cahaly, Charles Galdies, Bill Goff, Francis Wilkin , et al. (2 additional authors not shown)

Abstract: We present time-series photometry during eruption of the extremely fast nova V1674 Herculis (Nova Her 2021). The 2021 light curve showed periodic signals at 0.152921(3) d and 501.486(5) s, which we interpret as respectively the orbital and white dwarf spin-periods in the underlying binary. We also detected a sideband signal at the /difference/ frequency between these two clocks. During the first 1… ▽ More We present time-series photometry during eruption of the extremely fast nova V1674 Herculis (Nova Her 2021). The 2021 light curve showed periodic signals at 0.152921(3) d and 501.486(5) s, which we interpret as respectively the orbital and white dwarf spin-periods in the underlying binary. We also detected a sideband signal at the /difference/ frequency between these two clocks. During the first 15 days of outburst, the spin-period appears to have increased by 0.014(1)%. This increase probably arose from the sudden loss of high-angular-momentum gas ("the nova explosion") from the rotating, magnetic white dwarf. Both periodic signals appeared remarkably early in the outburst, which we attribute to the extreme speed with which the nova evolved (and became transparent to radiation from the inner binary). After that very fast initial increase of ~71 ms, the spin-period commenced a steady decrease of ~160 ms/year -- about 100x faster than usually seen in intermediate polars. This is probably due to high accretion torques from very high mass-transfer rates, which might be common when low-mass donor stars are strongly irradiated by a nova outburst. △ Less

Submitted 30 June, 2022; originally announced July 2022.

Comments: PDF, 10 pages, 1 table, 3 figures; in preparation; more info at http://cbastro.org/

Turbulence Generation by Shock Interaction with a Highly Non-Uniform Medium

Authors: Seth Davidovits, Christoph Federrath, Romain Teyssier, Kumar S. Raman, David C. Collins, Sabrina R. Nagel

Abstract: An initially planar shock wave propagating into a medium of non-uniform density will be perturbed, leading to the generation of post-shock velocity perturbations. Using numerical simulations we study this phenomenon in the case of highly-non-uniform density (order-unity normalized variance, $σ_ρ/\overlineρ \sim 1$) and strong shocks (shock Mach numbers $\overline{M}_s \gtrsim 10$). This leads to a… ▽ More An initially planar shock wave propagating into a medium of non-uniform density will be perturbed, leading to the generation of post-shock velocity perturbations. Using numerical simulations we study this phenomenon in the case of highly-non-uniform density (order-unity normalized variance, $σ_ρ/\overlineρ \sim 1$) and strong shocks (shock Mach numbers $\overline{M}_s \gtrsim 10$). This leads to a highly disrupted shock and a turbulent post-shock flow. We simulate this interaction for a range of shock drives and initial density configurations meant to mimic those which might be presently achieved in experiments. Theoretical considerations lead to scaling relations, which are found to reasonably predict the post-shock turbulence properties. The turbulent velocity dispersion and turbulent Mach number are found to depend on the pre-shock density dispersion and shock speed in a manner consistent with the linear Richtymer-Meshkov instability prediction. We also show a dependence of the turbulence generation on the scale of density perturbations. The post-shock pressure and density, which can be substantially reduced relative to the unperturbed case, are found to be reasonably predicted by a simplified analysis that treats the extended shock transition region as a single normal shock. △ Less

Submitted 31 May, 2022; originally announced May 2022.

Comments: 15 pages, 10 figures

The driving mode of shock-driven turbulence

Authors: Saee Dhawalikar, Christoph Federrath, Seth Davidovits, Romain Teyssier, Sabrina R. Nagel, Bruce A. Remington, David C. Collins

Abstract: Turbulence in the interstellar medium (ISM) is crucial in the process of star formation. Shocks produced by supernova explosions, jets, radiation from massive stars, or galactic spiral-arm dynamics are amongst the most common drivers of turbulence in the ISM. However, it is not fully understood how shocks drive turbulence, in particular whether shock driving is a more solenoidal(rotational, diverg… ▽ More Turbulence in the interstellar medium (ISM) is crucial in the process of star formation. Shocks produced by supernova explosions, jets, radiation from massive stars, or galactic spiral-arm dynamics are amongst the most common drivers of turbulence in the ISM. However, it is not fully understood how shocks drive turbulence, in particular whether shock driving is a more solenoidal(rotational, divergence-free) or a more compressive (potential, curl-free) mode of driving turbulence. The mode of turbulence driving has profound consequences for star formation, with compressive driving producing three times larger density dispersion, and an order of magnitude higher star formation rate than solenoidal driving. Here, we use hydrodynamical simulations of a shock inducing turbulent motions in a structured, multi-phase medium. This is done in the context of a laser-induced shock, propagating into a foam material, in preparation for an experiment to be performed at the National Ignition Facility (NIF). Specifically, we analyse the density and velocity distributions in the shocked turbulent medium, and measure the turbulence driving parameter $b=(σ^{2 Γ}_{ρ/\langle ρ\rangle}-1)^{1/2} (1-σ_{ρ\langle ρ\rangle}^{-2})^{-1/2}\mathcal{M}^{-1}Γ^{-1/2}$ with the density dispersion $σ_{ρ/ \langle ρ\rangle}$, the turbulent Mach number $\mathcal{M}$, and the polytropic exponent $Γ$. Purely solenoidal and purely compressive driving correspond to $b \sim 1/3$ and $b \sim 1$, respectively. Using simulations in which a shock is driven into a multi-phase medium with structures of different sizes and $Γ< 1$, we find $b \sim 1$ for all cases, showing that shock-driven turbulence is consistent with strongly compressive driving. △ Less

Submitted 28 May, 2022; originally announced May 2022.

Comments: 18 pages, 15 figures

Macroscopic analysis of time dependent plasticity in Ti alloys

Authors: Yi Xiong, Phani S. Karamched, Chi-Toan Nguyen, David M. Collins, Christopher M. Magazzeni, Edmund Tarleton, Angus J. Wilkinson

Abstract: Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing mechanisms of time dependent plasticity behaviour of Ti at low temperatures. Here, stress relaxation tests were performed at four different temperatures on three major… ▽ More Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing mechanisms of time dependent plasticity behaviour of Ti at low temperatures. Here, stress relaxation tests were performed at four different temperatures on three major alloy systems: commercially pure titanium (two alloys with different oxygen content), Ti-6Al-4V (two microstructures with differing beta phase fractions) and Ti-6Al-2Sn-4Zr-xMo (two alloys with different Mo content x= 2 or 6, and portion of beta phase). Key parameters controlling the time dependent plasticity were determined as a function of temperature. Both activation volume and energy were found to increase with temperature in all six alloys. It was found that the dwell fatigue effect is more significant by oxygen alloying but is suppressed by the addition of Mo. The presence of the beta phase did not strongly affect the dwell fatigue, however, it was suppressed at high temperature due to the low strain rate and strain rate sensitivity. △ Less

Submitted 12 April, 2022; originally announced April 2022.

Journal ref: Journal of Materials Science & Technology, Volume 124, 2022, Pages 135-140, ISSN 1005-0302

Investigating the low-flux states in six Intermediate Polars

Authors: Ava E. Covington, Aarran W. Shaw, Koji Mukai, Colin Littlefield, Craig O. Heinke, Richard M. Plotkin, Doug Barrett, James Boardman, David Boyd, Stephen M. Brincat, Rolf Carstens, Donald F. Collins, Lewis M. Cook, Walter R. Cooney, David Cejudo Fernández, Sjoerd Dufoer, Shawn Dvorak, Charles Galdies, William Goff, Franz-Josef Hambsch, Steve Johnston, Jim Jones, Kenneth Menzies, Libert A. G. Monard, Etienne Morelle , et al. (8 additional authors not shown)

Abstract: We present optical photometry of six intermediate polars that exhibit transitions to a low-flux state. For four of these systems, DW Cnc, V515 And, V1223 Sgr and RX J2133.7+5107, we are able to perform timing analysis in and out of the low states. We find that, for DW Cnc and V515 And, the dominant periodicities in the light curves change as the flux decreases, indicating a change in the sources'… ▽ More We present optical photometry of six intermediate polars that exhibit transitions to a low-flux state. For four of these systems, DW Cnc, V515 And, V1223 Sgr and RX J2133.7+5107, we are able to perform timing analysis in and out of the low states. We find that, for DW Cnc and V515 And, the dominant periodicities in the light curves change as the flux decreases, indicating a change in the sources' accretion properties as they transition to the low state. For V1223 Sgr we find that the variability is almost completely quenched at the lowest flux, but do not find evidence for a changing accretion geometry. For RX J2133.7+5107, the temporal properties do not change in the low state, but we do see a period of enhanced accretion that is coincident with increased variability on the beat frequency, which we do not associate with a change in the accretion mechanisms in the system. △ Less

Submitted 18 February, 2022; v1 submitted 16 February, 2022; originally announced February 2022.

Comments: 19 pages, 10 figures, accepted for publication in ApJ. The authors recommend downloading the PDF of this paper, as it takes a while to render online

Implementing and evaluating far-field 3D X-ray diffraction at the I12 JEEP beamline, Diamond Light Source

Authors: James A. D. Ball, Anna Kareer, Oxana V. Magdysyuk, Stefan Michalik, Anastasia Vrettou, Neal Parkes, Thomas Connolley, David M. Collins

Abstract: Three-dimensional X-ray diffraction (3DXRD) is shown to be feasible at the I12 Joint Engineering, Environmental and Processing (JEEP) beamline of Diamond Light Source. As a demonstration, a microstructually simple low-carbon ferritic steel was studied in a highly textured and annealed state. A processing pipeline suited to this beamline was created, using software already established in the 3DXRD… ▽ More Three-dimensional X-ray diffraction (3DXRD) is shown to be feasible at the I12 Joint Engineering, Environmental and Processing (JEEP) beamline of Diamond Light Source. As a demonstration, a microstructually simple low-carbon ferritic steel was studied in a highly textured and annealed state. A processing pipeline suited to this beamline was created, using software already established in the 3DXRD user community, enabling grain centre-of-mass positions, orientations and strain tensor elements to be determined. Orientations, with texture measurements independently validated from electron backscatter diffraction (EBSD) data, possessed a $\sim 0.1^\circ$ uncertainty, comparable with other 3DXRD instruments. The spatial resolution was limited by the far-field detector pixel size; the average of the grain centre of mass position errors was determined as $\pm \sim 80 μ$m. An average per-grain error of $\sim 1 \times 10^{-3}$ for the elastic strains was also measured; this could be reduced in future experiments by improving sample preparation, data collection and analysis techniques. Application of 3DXRD onto I12 shows great potential, where its implementation is highly desirable due the flexible, open architecture of the beamline. User-owned or designed sample environments can be used, thus 3DXRD could be applied to previously unexplored scientific areas. △ Less

Submitted 20 February, 2023; v1 submitted 12 November, 2021; originally announced November 2021.

Comments: 13 pages, 10 figures. Published in Journal of Synchrotron Radiation

Journal ref: Journal of Synchrotron Radiation, July 2022, Volume 29, Pages 1043-1053

Photovoltaics-driven power production can support human exploration on Mars

Authors: Anthony J. Abel, Aaron J. Berliner, Mia Mirkovic, William D. Collins, Adam P. Arkin, Douglas S. Clark

Abstract: A central question surrounding possible human exploration of Mars is whether crewed missions can be supported by available technologies using in situ resources. Here, we show that photovoltaics-based power systems would be adequate and practical to sustain a crewed outpost for an extended period over a large fraction of the planet's surface. Climate data were integrated into a radiative transfer m… ▽ More A central question surrounding possible human exploration of Mars is whether crewed missions can be supported by available technologies using in situ resources. Here, we show that photovoltaics-based power systems would be adequate and practical to sustain a crewed outpost for an extended period over a large fraction of the planet's surface. Climate data were integrated into a radiative transfer model to predict spectrally-resolved solar flux across the Martian surface. This informed detailed balance calculations for solar cell devices that identified optimal bandgap combinations for maximizing production capacity over a Martian year. We then quantified power systems, manufacturing, and agricultural demands for a six-person mission, which revealed that photovoltaics-based power generation would require <10 t of carry-along mass, outperforming alternatives over ~50% of Mars' surface. △ Less

Submitted 27 October, 2021; originally announced October 2021.

Comments: 5 pages, 4 figures, supplementary information

Weighted ellipse fitting routine for spotty or incomplete Debye-Scherrer rings on a 2D detector

Authors: Phani S. Karamched, Yi Xiong, Chi-Toan Nguyen, David M. Collins, Christopher M. Magazzeni, Angus J. Wilkinson

Abstract: We introduce a weighted ellipse fitting routine to measure Debye Scherrer rings acquired on 2D area detectors and demonstrate its use in strain determination. The method is relatively robust against incomplete rings due to low number of grains in the diffraction volume (spotty rings), or strong texture (intensity depletion in some azimuths). The method works by applying an annular mask around each… ▽ More We introduce a weighted ellipse fitting routine to measure Debye Scherrer rings acquired on 2D area detectors and demonstrate its use in strain determination. The method is relatively robust against incomplete rings due to low number of grains in the diffraction volume (spotty rings), or strong texture (intensity depletion in some azimuths). The method works by applying an annular mask around each diffraction ring and fitting an ellipse, using all pixel positions and their diffracted intensity as weights in the minimisation. We compare this method to the more popular cake integration method, and show that the weighted ellipse method works when the cake integration method fails or works poorly. The lattice strain sensitivity from spotty diffraction rings is in the order or 2E-5 or better. The algorithm has been made available for public use and works with 2D diffraction patterns acquired in a laboratory scale XRD equipment, TEM or a synchrotron. △ Less

Submitted 11 October, 2021; originally announced October 2021.

Measuring an off-Center Detonation through Infrared Line Profiles: The peculiar Type Ia Supernova SN~2020qxp/ASASSN-20jq

Authors: P. Hoeflich, C. Ashall, S. Bose, E. Baron, M. D. Stritzinger, S. Davis, M. Shahbandeh, G. S. Anand, D. Baade, C. R. Burns, D. C. Collins, T. R. Diamond, A. Fisher, L. Galbany, B. A. Hristov, E. Y. Hsiao, M. M. Phillips, B. Shappee, N. B. Suntzeff, M. Tucker

Abstract: We present and analyze a near infrared(NIR) spectrum of the under-luminous Type Ia supernova SN~2020qxp/ASASSN-20jq obtained with NIRES at the Keck Observatory 191 days after B-band maximum. The spectrum is dominated by a number of broad emission features including the [FeII] at 1.644mu which is highly asymmetric with a tilted top and a peak red-shifted by ~2,000km/s. In comparison with 2-D non-LT… ▽ More We present and analyze a near infrared(NIR) spectrum of the under-luminous Type Ia supernova SN~2020qxp/ASASSN-20jq obtained with NIRES at the Keck Observatory 191 days after B-band maximum. The spectrum is dominated by a number of broad emission features including the [FeII] at 1.644mu which is highly asymmetric with a tilted top and a peak red-shifted by ~2,000km/s. In comparison with 2-D non-LTE synthetic spectra computed from 3-D simulations of off-center delayed-detonation Chandrasekhar-mass white-dwarf(WD) models, we find good agreement between the observed lines and the synthetic profiles, and are able to unravel the structure of the progenitor's envelope. We find that the size and tilt of the [Fe II] 1.644mu-profile (in velocity space) is an effective way to determine the location of an off-center delayed-detonation transition (DDT) and the viewing angle, and it requires a WD with a high central density of ~4E9$g/cm^3$. We also tentatively identify a stable Ni feature around 1.9mu characterized by a `pot-belly' profile that is slightly offset with respect to the kinematic center. In the case of SN~2020qxp/ASASSN-20jq, we estimate that the location of the DDT is ~0.3M(WD) off-center, which gives rise to an asymmetric distribution of the underlying ejecta. We also demonstrate that low-luminosity and high-density WD SNIa progenitors exhibit a very strong overlap of Ca and 56Ni in physical space. This results in the formation of a prevalent [Ca II] 0.73mu emission feature, which is sensitive to asymmetry effects. Our findings are discussed within the context of alternative scenarios, including off-center C/O detonations in He-triggered sub-M(Ch)-WDs and the direct collision of two WDs. Snapshot programs with Gemini/Keck/VLT/ELT class instruments and our spectropolarimetry program are complementary to mid-IR spectra by JWST. △ Less

Submitted 7 September, 2021; originally announced September 2021.

Comments: 29 pages, 6 figures, 6 Tables, to appear in The Astrophysical Journal (submitted: 7/26/21, revised: 9/4/21, accepted: 9/7/21)

Physics of Thermonuclear Explosions: Magnetic Field Effects on Deflagration Fronts and Observable Consequences

Authors: Boyan Hristov, Peter Hoeflich, David C. Collins

Abstract: We present a study of the influence of magnetic field strength and morphology in Type Ia Supernovae and their late-time light curves and spectra. In order to both capture self-consistent magnetic field topologies as well evolve our models to late times, a two stage approach is taken. We study the early deflagration phase (1s) using a variety of magnetic field strengths, and find that the topology… ▽ More We present a study of the influence of magnetic field strength and morphology in Type Ia Supernovae and their late-time light curves and spectra. In order to both capture self-consistent magnetic field topologies as well evolve our models to late times, a two stage approach is taken. We study the early deflagration phase (1s) using a variety of magnetic field strengths, and find that the topology of the field is set by the burning, independent of the initial strength. We study late time (~1000 days) light curves and spectra with a variety of magnetic field topologies, and infer magnetic field strengths from observed supernovae. Lower limits are found to be 106G. This is determined by the escape, or lack thereof, of positrons that are tied to the magnetic field. The first stage employs 3d MHD and a local burning approximation, and uses the code Enzo. The second stage employs a hybrid approach, with 3D radiation and positron transport, and spherical hydrodynamics. The second stage uses the code HYDRA. In our models, magnetic field amplification remains small during the early deflagration phase. Late-time spectra bear the imprint of both magnetic field strength and morphology. Implications for alternative explosion scenarios are discussed. △ Less

Submitted 28 June, 2021; originally announced June 2021.

Comments: Accepted for publication in ApJ

DeepLab2: A TensorFlow Library for Deep Labeling

Authors: Mark Weber, Huiyu Wang, Siyuan Qiao, Jun Xie, Maxwell D. Collins, Yukun Zhu, Liangzhe Yuan, Dahun Kim, Qihang Yu, Daniel Cremers, Laura Leal-Taixe, Alan L. Yuille, Florian Schroff, Hartwig Adam, Liang-Chieh Chen

Abstract: DeepLab2 is a TensorFlow library for deep labeling, aiming to provide a state-of-the-art and easy-to-use TensorFlow codebase for general dense pixel prediction problems in computer vision. DeepLab2 includes all our recently developed DeepLab model variants with pretrained checkpoints as well as model training and evaluation code, allowing the community to reproduce and further improve upon the sta… ▽ More DeepLab2 is a TensorFlow library for deep labeling, aiming to provide a state-of-the-art and easy-to-use TensorFlow codebase for general dense pixel prediction problems in computer vision. DeepLab2 includes all our recently developed DeepLab model variants with pretrained checkpoints as well as model training and evaluation code, allowing the community to reproduce and further improve upon the state-of-art systems. To showcase the effectiveness of DeepLab2, our Panoptic-DeepLab employing Axial-SWideRNet as network backbone achieves 68.0% PQ or 83.5% mIoU on Cityscaspes validation set, with only single-scale inference and ImageNet-1K pretrained checkpoints. We hope that publicly sharing our library could facilitate future research on dense pixel labeling tasks and envision new applications of this technology. Code is made publicly available at \url{https://github.com/google-research/deeplab2}. △ Less

Submitted 17 June, 2021; originally announced June 2021.

Comments: 4-page technical report. The first three authors contributed equally to this work

Ventricle features as reliable differentiators between the bvFTD and other dementias

Authors: Ana L. Manera, Mahsa Dadar, D. Louis Collins, Simon Ducharme

Abstract: INTRODUCTION: Lateral ventricles are reliable and sensitive indicators of brain atrophy and disease progression in behavioral variant frontotemporal dementia (bvFTD). We aimed to investigate whether an automated tool using ventricular features could improve diagnostic accuracy in bvFTD across neurodegenerative diseases. METHODS: Using 678 subjects (2750 timepoints), differences in ventricular feat… ▽ More INTRODUCTION: Lateral ventricles are reliable and sensitive indicators of brain atrophy and disease progression in behavioral variant frontotemporal dementia (bvFTD). We aimed to investigate whether an automated tool using ventricular features could improve diagnostic accuracy in bvFTD across neurodegenerative diseases. METHODS: Using 678 subjects (2750 timepoints), differences in ventricular features were assessed between bvFTD, normal controls and other dementia cohorts. RESULTS: Ventricular antero-posterior ratio (APR) was the only feature that was significantly different and increased faster in bvFTD compared to all other cohorts. We achieved a 10-fold cross-validation accuracy of 80% (77% sensitivity, 82% specificity) in differentiating bvFTD from all other cohorts with ventricular features, and 76% accuracy using only the single APR feature. DISCUSSION: APR could be a useful and easy-to-implement feature to aid bvFTD diagnosis. We have made our ventricle feature estimation and bvFTD diagnostic tool publicly available, allowing application of our model in other studies. △ Less

Submitted 4 March, 2021; originally announced March 2021.

Automatic prediction of cognitive and functional decline can significantly decrease the number of subjects required for clinical trials in early Alzheimer's disease

Authors: Neda Shafiee, Mahsa Dadar, Simon Ducharme, D. Louis Collins

Abstract: INTRODUCTION: Heterogeneity in the progression of Alzheimer's disease makes it challenging to predict the rate of cognitive and functional decline for individual patients. Tools for short-term prediction could help enrich clinical trial designs and focus prevention strategies on the most at-risk patients. METHOD: We built a prognostic model using baseline cognitive scores and MRI-based features to… ▽ More INTRODUCTION: Heterogeneity in the progression of Alzheimer's disease makes it challenging to predict the rate of cognitive and functional decline for individual patients. Tools for short-term prediction could help enrich clinical trial designs and focus prevention strategies on the most at-risk patients. METHOD: We built a prognostic model using baseline cognitive scores and MRI-based features to determine which subjects with mild cognitive impairment remained stable and which functionally declined (measured by a two-point increase in CDR-SB) over 2 and 3-year follow-up periods, periods typical of the length of clinical trials. RESULTS: Combining both sets of features yields 77% accuracy (81% sensitivity and 75% specificity) to predict cognitive decline at 2 years (74% accuracy at 3 years with 75% sensitivity and 73% specificity). Using this tool to select trial participants yields a 3.8-fold decrease in the required sample size for a 2-year study (2.8-fold decrease for a 3-year study) for a hypothesized 25% treatment effect to reduce cognitive decline. DISCUSSION: This cohort enrichment tool could accelerate treatment development by increasing power in clinical trials. △ Less

Submitted 20 January, 2021; originally announced January 2021.

An in-situ synchrotron diffraction study of stress relaxation in titanium: Effect of temperature and oxygen on cold dwell fatigue

Authors: Yi Xiong, Phani S. Karamched, Chi-Toan Nguyen, David M. Collins, Nicolo Grilli, Christopher M. Magazzeni, Edmund Tarleton, Angus J. Wilkinson

Abstract: There is a long-standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains favourably oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying… ▽ More There is a long-standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains favourably oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to understand the complex cold dwell fatigue problem. Knowing the effect of operating temperature and oxygen content on cold dwell fatigue will be beneficial for future alloy design to address this problem. In this work, synchrotron X-ray diffraction during stress relaxation experiments was used to characterise the time dependent plastic behaviour of two commercially pure titanium samples (grade 1 and grade 4) with different oxygen content at 4 different temperatures (room temperature, 75C, 145C and 250C). Lattice strains were measured by tracking the diffraction peak shift from multiple crystallographic plane families (21 diffraction rings) as a function of their orientation with respect to the loading direction. Critical resolved shear stress, activation energy and activation volume were established for both prismatic and basal slip as a function of temperature and oxygen content by fitting a crystal plasticity finite element model to the lattice strain relaxation responses measured along the loading axis for five strong reflections. Higher strain rate sensitivity was found to lead to higher plasticity during cold dwell. △ Less

Submitted 19 November, 2020; originally announced November 2020.

Journal ref: Acta Materialia Volume 213, July 2021, 116937

The Catalogue for Astrophysical Turbulence Simulations (CATS)

Authors: B. Burkhart, S. Appel, S. Bialy, J. Cho, A. J. Christensen, D. Collins, C. Federrath, D. Fielding, D. Finkbeiner, A. S. Hill, J. C. Ibanez-Mejia, M. R. Krumholz, A. Lazarian, M. Li, P. Mocz, M. -M. Mac Low, J. Naiman, S. K. N. Portillo, B. Shane, Z. Slepian, Y. Yuan

Abstract: Turbulence is a key process in many fields of astrophysics. Advances in numerical simulations of fluids over the last several decades have revolutionized our understanding of turbulence and related processes such as star formation and cosmic ray propagation. However, data from numerical simulations of astrophysical turbulence are often not made public. We introduce a new simulation-oriented databa… ▽ More Turbulence is a key process in many fields of astrophysics. Advances in numerical simulations of fluids over the last several decades have revolutionized our understanding of turbulence and related processes such as star formation and cosmic ray propagation. However, data from numerical simulations of astrophysical turbulence are often not made public. We introduce a new simulation-oriented database for the astronomical community: The Catalogue for Astrophysical Turbulence Simulations (CATS), located at www.mhdturbulence.com. CATS includes magnetohydrodynamic (MHD) turbulent box simulation data products generated by the public codes athena++, arepo, enzo, and flash. CATS also includes several synthetic observational data sets, such as turbulent HI data cubes. We also include measured power spectra and 3-point correlation functions from some of these data. We discuss the importance of open source statistical and visualization tools for the analysis of turbulence simulations such as those found in CATS. △ Less

Submitted 21 October, 2020; originally announced October 2020.

Comments: Accepted to ApJ

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

Authors: Yunhui Chen, Samuel J. Clark, David M. Collins, Sebastian Marussi, Simon A. Hunt, Danielle M. Fenech, Thomas Connolley, Robert C. Atwood, Oxana V. Magdysyuk, Gavin J. Baxter, Martyn A. Jones, Chu Lun Alex Leung, Peter D. Lee

Abstract: The governing mechanistic behaviour of Directed Energy Deposition Additive Manufacturing (DED-AM) is revealed by a combined in situ and operando synchrotron X-ray imaging and diffraction study of a nickel-base superalloy, IN718. Using a unique process replicator, real-space phase-contrast imaging enables quantification of the melt-pool boundary and flow dynamics during solidification. This imaging… ▽ More The governing mechanistic behaviour of Directed Energy Deposition Additive Manufacturing (DED-AM) is revealed by a combined in situ and operando synchrotron X-ray imaging and diffraction study of a nickel-base superalloy, IN718. Using a unique process replicator, real-space phase-contrast imaging enables quantification of the melt-pool boundary and flow dynamics during solidification. This imaging knowledge informed precise diffraction measurements of temporally resolved microstructural phases during transformation and stress development with a spatial resolution of 100 $μ$m. The diffraction quantified thermal gradient enabled a dendritic solidification microstructure to be predicted and coupled to the stress orientation and magnitude. The fast cooling rate entirely suppressed the formation of secondary phases or recrystallisation in the solid-state. Upon solidification, the stresses rapidly increase to the yield strength during cooling. This insight, combined with IN718 $'$s large solidification range suggests that the accumulated plasticity exhausts the alloy$'$s ductility, causing liquation cracking. This study has revealed additional fundamental mechanisms governing the formation of highly non-equilibrium microstructures during DED-AM. △ Less

Submitted 16 September, 2020; originally announced September 2020.

Connecting optical intensities and electric fields using a triple interferometer

Authors: David Collins, Justin Endicott

Abstract: We consider the issue of validating the relationship between electric fields and optical intensity as proposed by the classical theory of electromagnetism. We describe an interference scenario in which this can be checked using only intensity measurements and without any other information regarding the details of the arrangement of the associated fields. We implement this experimentally using a tr… ▽ More We consider the issue of validating the relationship between electric fields and optical intensity as proposed by the classical theory of electromagnetism. We describe an interference scenario in which this can be checked using only intensity measurements and without any other information regarding the details of the arrangement of the associated fields. We implement this experimentally using a triple Michelson interferometer and the results strongly suggest that the method validates the classical relationship between optical intensity and the associated classical field. △ Less

Submitted 31 July, 2020; originally announced August 2020.

Ultra high-temperature deformation in a single crystal superalloy: Meso-scale process simulation and micro-mechanisms

Authors: Yuanbo T. Tang, Neil D'Souza, Bryan Roebuck, Phani Karamched, Chinnapat Panwisawas, David M. Collins

Abstract: A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge volumes were smaller than the length scale of the highly cored structure of the parent material from which they were produced, their subtle composition differen… ▽ More A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge volumes were smaller than the length scale of the highly cored structure of the parent material from which they were produced, their subtle composition differences gave rise to differing work hardening rates, influenced by varying secondary dendrite arm spacings, gamma-prime phase solvus temperatures and a topologically inverted gamma/gamma-prime microstructure. The gamma-prime precipitates possessed a characteristic `X' morphology, resulting from the simultaneously active solute transport mechanisms of thermally favoured octodendritic growth and N-type rafting, indicating creep-type mechanisms were prevalent. High resolution-electron backscatter diffraction (HR-EBSD) characterisation reveals deformation patterning that follows the gamma/gamma-prime microstructure, with high geometrically necessary dislocation density fields localised to the gamma/gamma-prime interfaces; Orowan loo** is evidently the mechanism that mediated plasticity. Examination of the residual elastic stresses indicated the `X' gamma-prime precipitate morphology had significantly enhanced the deformation heterogeneity, resulting in stress states within the gamma channels that favour slip, and that encourage further growth of gamma-prime precipitate protrusions. The combination of such localised plasticity and residual stresses are considered to be critical in the formation of the recrystallisation defect in subsequent post-casting homogenisation heat treatments. △ Less

Submitted 17 August, 2020; originally announced August 2020.

Lord Kelvin's isotropic helicoid

Authors: Darci Collins, Rami J. Hamati, Fabien Candelier, Kristian Gustavsson, Bernhard Mehlig, Greg A. Voth

Abstract: Nearly 150 years ago, Lord Kelvin proposed the isotropic helicoid, a particle with isotropic yet chiral interactions with a fluid, so that translation couples to rotation. An implementation of his design fabricated with a three-dimensional printer is found experimentally to have no detectable translation-rotation coupling, although the particle point-group symmetry allows this coupling. We explain… ▽ More Nearly 150 years ago, Lord Kelvin proposed the isotropic helicoid, a particle with isotropic yet chiral interactions with a fluid, so that translation couples to rotation. An implementation of his design fabricated with a three-dimensional printer is found experimentally to have no detectable translation-rotation coupling, although the particle point-group symmetry allows this coupling. We explain these results by demonstrating that in Stokes flow, the chiral coupling of such isotropic helicoids made out of non-chiral vanes is due only to hydrodynamic interactions between these vanes. Therefore it is small. In summary, Kelvin's predicted isotropic helicoid exists, but only as a weak breaking of a symmetry of non-interacting vanes in Stokes flow. △ Less

Submitted 21 July, 2021; v1 submitted 15 June, 2020; originally announced June 2020.

Comments: 12 pages, 5 figures, final version

Journal ref: Phys. Rev. Fluids 6, 074302 (2021)

Approaches for handling slo** fluid-solid interfaces with the parabolic equation method

Authors: Michael D. Collins, Adith Ramamurti

Abstract: Several methods for handling slo** fluid-solid interfaces with the elastic parabolic equation are tested. A single-scattering approach that is modified for the fluid-solid case is accurate for some problems but breaks down when the contrast across the interface is sufficiently large and when there is a Scholte wave. An approximate condition for conserving energy breaks down when a Scholte wave p… ▽ More Several methods for handling slo** fluid-solid interfaces with the elastic parabolic equation are tested. A single-scattering approach that is modified for the fluid-solid case is accurate for some problems but breaks down when the contrast across the interface is sufficiently large and when there is a Scholte wave. An approximate condition for conserving energy breaks down when a Scholte wave propagates along a slo** interface but otherwise performs well for a large class of problems involving gradual slopes, a wide range of sediment parameters, and ice cover. An approach based on treating part of the fluid layer as a solid with low shear speed handles Scholte waves and a wide range of sediment parameters accurately, but this approach needs further development. The variable rotated parabolic equation is not effective for problems involving frequent or continuous changes in slope, but it provides a high level of accuracy for most of the test cases, which have regions of constant slope. Approaches based on a coordinate map** and on using a film of solid material with low shear speed on the rises of the stair steps that approximate a slo** interface are also tested and found to produce accurate results for some cases. △ Less

Submitted 21 May, 2020; originally announced May 2020.

Comments: 17 pages, 10 figures, submitted to Journal of Theoretical and Computational Acoustics

Naive-Student: Leveraging Semi-Supervised Learning in Video Sequences for Urban Scene Segmentation

Authors: Liang-Chieh Chen, Raphael Gontijo Lopes, Bowen Cheng, Maxwell D. Collins, Ekin D. Cubuk, Barret Zoph, Hartwig Adam, Jonathon Shlens

Abstract: Supervised learning in large discriminative models is a mainstay for modern computer vision. Such an approach necessitates investing in large-scale human-annotated datasets for achieving state-of-the-art results. In turn, the efficacy of supervised learning may be limited by the size of the human annotated dataset. This limitation is particularly notable for image segmentation tasks, where the exp… ▽ More Supervised learning in large discriminative models is a mainstay for modern computer vision. Such an approach necessitates investing in large-scale human-annotated datasets for achieving state-of-the-art results. In turn, the efficacy of supervised learning may be limited by the size of the human annotated dataset. This limitation is particularly notable for image segmentation tasks, where the expense of human annotation is especially large, yet large amounts of unlabeled data may exist. In this work, we ask if we may leverage semi-supervised learning in unlabeled video sequences and extra images to improve the performance on urban scene segmentation, simultaneously tackling semantic, instance, and panoptic segmentation. The goal of this work is to avoid the construction of sophisticated, learned architectures specific to label propagation (e.g., patch matching and optical flow). Instead, we simply predict pseudo-labels for the unlabeled data and train subsequent models with both human-annotated and pseudo-labeled data. The procedure is iterated for several times. As a result, our Naive-Student model, trained with such simple yet effective iterative semi-supervised learning, attains state-of-the-art results at all three Cityscapes benchmarks, reaching the performance of 67.8% PQ, 42.6% AP, and 85.2% mIOU on the test set. We view this work as a notable step towards building a simple procedure to harness unlabeled video sequences and extra images to surpass state-of-the-art performance on core computer vision tasks. △ Less

Submitted 19 July, 2020; v1 submitted 20 May, 2020; originally announced May 2020.

Comments: Accepted to ECCV 2020

Online Payments by Merely Broadcasting Messages (Extended Version)

Authors: Daniel Collins, Rachid Guerraoui, Jovan Komatovic, Matteo Monti, Athanasios Xygkis, Matej Pavlovic, Petr Kuznetsov, Yvonne-Anne Pignolet, Dragos-Adrian Seredinschi, Andrei Tonkikh

Abstract: We address the problem of online payments, where users can transfer funds among themselves. We introduce Astro, a system solving this problem efficiently in a decentralized, deterministic, and completely asynchronous manner. Astro builds on the insight that consensus is unnecessary to prevent double-spending. Instead of consensus, Astro relies on a weaker primitive---Byzantine reliable broadcast--… ▽ More We address the problem of online payments, where users can transfer funds among themselves. We introduce Astro, a system solving this problem efficiently in a decentralized, deterministic, and completely asynchronous manner. Astro builds on the insight that consensus is unnecessary to prevent double-spending. Instead of consensus, Astro relies on a weaker primitive---Byzantine reliable broadcast---enabling a simpler and more efficient implementation than consensus-based payment systems. In terms of efficiency, Astro executes a payment by merely broadcasting a message. The distinguishing feature of Astro is that it can maintain performance robustly, i.e., remain unaffected by a fraction of replicas being compromised or slowed down by an adversary. Our experiments on a public cloud network show that Astro can achieve near-linear scalability in a sharded setup, going from $10K$ payments/sec (2 shards) to $20K$ payments/sec (4 shards). In a nutshell, Astro can match VISA-level average payment throughput, and achieves a $5\times$ improvement over a state-of-the-art consensus-based solution, while exhibiting sub-second $95^{th}$ percentile latency. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: This is an extended version of a conference article, appearing in the proceedings of the 50th IEEE/IFIP Int. Conference on Dependable Systems and Networks (DSN 2020). This work has been supported in part by the European grant 862082, AT2 -- ERC-2019-PoC, and in part by a grant from Interchain Foundation

Spinodal decomposition versus classical gamma-prime nucleation in a nickel-base superalloy powder: An in-situ neutron diffraction and atomic-scale analysis

Authors: David M Collins, Neil D'Souza, Chinnapat Panwisawas, Chrysanthi Papadaki, Geoff D West, Aleksander Kostka, Paraskevas Kontis

Abstract: Contemporary powder-based polycrystalline nickel-base superalloys inherit microstructures and properties that are heavily determined by the thermo-mechanical treatments during processing. Here, the influence of a thermal exposure alone to an alloy powder is studied to elucidate the controlling formation mechanisms of the strengthening precipitates using a combination of atom probe tomography and i… ▽ More Contemporary powder-based polycrystalline nickel-base superalloys inherit microstructures and properties that are heavily determined by the thermo-mechanical treatments during processing. Here, the influence of a thermal exposure alone to an alloy powder is studied to elucidate the controlling formation mechanisms of the strengthening precipitates using a combination of atom probe tomography and in-situ neutron diffraction. The initial powder comprised a single-phase supersaturated gamma only; from this, the evolution of gamma-prime volume fraction and lattice misfit was assessed. The initial powder notably possessed elemental segregation of Cr and Co and elemental repulsion between Ni, Al and Ti with Cr; here proposed to be a precursor for subsequent gamma to gamma-prime phase transformations. Subsolvus heat treatments yielded a unimodal gamma-prime distribution, formed during heating, with evidence supporting its formation to be via spinodal decomposition. A supersolvus heat treatment led to the formation of this same gamma-prime population during heating, but dissolves as the temperature increases further. The gamma-prime then reprecipitates as a multimodal population during cooling, here forming by classical nucleation and growth. Atom probe characterisation provided intriguing precipitate characteristics, including clear differences in chemistry and microstructure, depending on whether the gamma-prime formed during heating or cooling. △ Less

Submitted 17 October, 2020; v1 submitted 2 April, 2020; originally announced April 2020.

Journal ref: Acta Materialia 200 (2020) 959-970

Cold Creep of Titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations

Authors: Yi Xiong, Phani Karamched, Chi-Toan Nguyen, David M Collins, Christopher M Magazzeni, Edmund Tarleton, Angus J Wilkinson

Abstract: There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time… ▽ More There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to successfully predicting the complex cold dwell fatigue problem. This work uses a novel approach of in situ synchrotron X-ray diffraction during stress relaxation tests, to quantify the time dependent plasticity. Measured lattice strains from multiple lattice families (21 diffraction rings) were compared with simulated lattice strains from crystal plasticity finite element (CPFE) simulations. The prism slip parameters were found to show stronger strain rate sensitivity compared to basal slip, and this has a significant effect on stress redistribution to hard grain orientations during cold creep. △ Less

Submitted 24 August, 2020; v1 submitted 3 March, 2020; originally announced March 2020.

Journal ref: Acta Materialia Volume 199, 15 October 2020, Pages 561-577