-
Broadband dual-comb hyperspectral imaging and adaptable spectroscopy with programmable frequency combs
Authors:
Fabrizio R. Giorgetta,
Jean-Daniel Deschênes,
Richard L. Lieber,
Ian Coddington,
Nathan R. Newbury,
Esther Baumann
Abstract:
We explore the advantages of a free-form dual-comb spectroscopy (DCS) platform based on time-programmable frequency combs for real-time, penalty-free apodized scanning. In traditional DCS, the fundamental spectral resolution, which equals the comb repetition rate, can be excessively fine for many applications. While the fine resolution is not itself problematic, it comes with the penalty of excess…
▽ More
We explore the advantages of a free-form dual-comb spectroscopy (DCS) platform based on time-programmable frequency combs for real-time, penalty-free apodized scanning. In traditional DCS, the fundamental spectral resolution, which equals the comb repetition rate, can be excessively fine for many applications. While the fine resolution is not itself problematic, it comes with the penalty of excess acquisition time. Post-processing apodization (windowing) can be applied to tailor the resolution to the sample, but only with a deadtime penalty proportional to the degree of apodization. The excess acquisition time remains. With free-form DCS, this deadtime is avoided by programming a real-time apodization pattern that dynamically reverses the pulse periods between the dual frequency combs. In this way, one can tailor the spectrometer's resolution and update rate to different applications without penalty. We show operation of a free-form DCS system where the spectral resolution is varied from the intrinsic fine resolution of 160 MHz up to 822 GHz by applying tailored real-time apodization. Because there is no deadtime penalty, the spectral signal-to-noise ratio increases linearly with resolution by 5000x over this range, as opposed to the square root increase observed for postprocessing apodization in traditional DCS. We explore the flexibility to change resolution and update rate to perform hyperspectral imaging at slow camera frame rates, where the penalty-free apodization allows for optimal use of each frame. We obtain dual-comb hyperspectral movies at a 20 Hz spectrum update rate with broad optical spectral coverage of over 10 THz.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
Open-path Dual-comb Spectroscopy for Multispecies Trace Gas Detection in the 4.5 μm to 5 μm Spectral Region
Authors:
Fabrizio R. Giorgetta,
Jeff Peischl,
Daniel I. Herman,
Gabriel Ycas,
Ian Coddington,
Nathan R. Newbury,
Kevin C. Cossel
Abstract:
Open-path dual-comb spectroscopy provides multi-species atmospheric gas concentration measurements with high precision. Here, we extend open-path dual comb spectroscopy to the mid-infrared 5 μm atmospheric window, enabling atmospheric concentration retrievals of the primary greenhouse gases, N$_2$O, CO$_2$, and H$_2$O as well as the criterion air pollutants O$_3$ and CO across 600 m and 2 km round…
▽ More
Open-path dual-comb spectroscopy provides multi-species atmospheric gas concentration measurements with high precision. Here, we extend open-path dual comb spectroscopy to the mid-infrared 5 μm atmospheric window, enabling atmospheric concentration retrievals of the primary greenhouse gases, N$_2$O, CO$_2$, and H$_2$O as well as the criterion air pollutants O$_3$ and CO across 600 m and 2 km round-trip paths. We demonstrate measurements over a five-day period at two-minute temporal resolution with 80% uptime. The achieved precision is sufficient to resolve the atmospheric concentration variations of the multiple gas species; retrieved dry mixing ratios of CO and N$_2$O are in good agreement with a co-located point sensor. In addition, the retrieved ratio of excess CO vs CO$_2$ agrees with similar urban studies but disagrees with the US National Emission Inventory by a factor of 3. Our retrieved ratio of excess N$_2$O vs CO$_2$ exhibits a plume-dependent value, indicating the variability of sources of the greenhouse gas N$_2$O.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Long Distance Continuous Methane Emissions Monitoring with Dual Frequency Comb Spectroscopy: deployment and blind testing in complex emissions scenarios
Authors:
Sean Coburn,
Caroline B. Alden,
Robert Wright,
Griffith Wendland,
Alex Rybchuk,
Nicolas Seitz,
Ian Coddington,
Gregory B. Rieker
Abstract:
Continuous monitoring of oil and gas infrastructure is of interest for improving emissions and safety by enabling rapid identification and repair of emission sources, especially large sources that are responsible for the bulk of total emissions. We have previously demonstrated dual frequency comb spectroscopy (DCS) coupled with atmospheric modeling and inversion techniques (the DCS Observing Syste…
▽ More
Continuous monitoring of oil and gas infrastructure is of interest for improving emissions and safety by enabling rapid identification and repair of emission sources, especially large sources that are responsible for the bulk of total emissions. We have previously demonstrated dual frequency comb spectroscopy (DCS) coupled with atmospheric modeling and inversion techniques (the DCS Observing System) as a viable and accurate approach for detection, attribution and quantification of methane emissions at distances of more than 1 km under controlled, steady emissions scenarios. Here, we present the results of validation testing designed to mimic the complexity of operational well pad emissions from oil and gas production, and the first field measurements at an active oil and gas facility. The validation tests are performed single-blind (the measurement and data analysis team are not given information about the emissions) at the Methane Emissions Technology Evaluation Center (METEC) test facility. They consist of a series of scenarios ranging from a single, steady-rate emission point to multiple emission points that include intermittent releases (the METEC "R2" tests). Additionally, we present field measurements at an active natural gas storage facility demonstrating that the system can remotely and autonomously monitor methane emissions in a true industrial setting. This field verification is in a configuration designed for continuous and long-term characterization of operational and fugitive emissions. These demonstrations confirm that the DCS Observing System can provide high-confidence continuous monitoring of emissions from complex, operational facilities among natural gas infrastructure.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Multi-functional integrated photonics in the mid-infrared with suspended AlGaAs on silicon
Authors:
Jeff Chiles,
Nima Nader,
Eric J. Stanton,
Daniel Herman,
Galan Moody,
Jiangang Zhu,
J. Connor Skehan,
Biswarup Guha,
Abijith Kowligy,
Juliet T. Gopinath,
Kartik Srinivasan,
Scott A. Diddams,
Ian Coddington,
Nathan R. Newbury,
Jeffrey M. Shainline,
Sae Woo Nam,
Richard P. Mirin
Abstract:
The microscale integration of mid- and longwave-infrared photonics could enable the development of fieldable, robust chemical sensors, as well as highly efficient infrared frequency converters. However, such technology would be defined by the choice of material platform, which immediately determines the strength and types of optical nonlinearities available, the optical transparency window, modal…
▽ More
The microscale integration of mid- and longwave-infrared photonics could enable the development of fieldable, robust chemical sensors, as well as highly efficient infrared frequency converters. However, such technology would be defined by the choice of material platform, which immediately determines the strength and types of optical nonlinearities available, the optical transparency window, modal confinement, and physical robustness. In this work, we demonstrate a new platform, suspended AlGaAs waveguides integrated on silicon, providing excellent performance in all of these metrics. We demonstrate low propagation losses within a span of nearly two octaves (1.26 to 4.6 $μ$m) with exemplary performance of 0.45 dB/cm at $λ= 2.4$ $μ$m. We exploit the high nonlinearity of this platform to demonstrate 1560 nm-pumped second-harmonic generation and octave-spanning supercontinuum reaching out to 2.3 $μ$m with 3.4 pJ pump pulse energy. With mid-IR pum**, we generate supercontinuum spanning from 2.3 to 6.5 $μ$m. Finally, we demonstrate the versatility of the platform with mid-infrared passive devices such as low-loss 10 $μ$m-radius bends, compact power splitters with 96 $\pm$ 1% efficiency and edge couplers with 3.0 $\pm$ 0.1 dB loss. This platform has strong potential for multi-functional integrated photonic systems in the mid-IR.
△ Less
Submitted 3 May, 2019;
originally announced May 2019.
-
Compact Optical Atomic Clock Based on a Two-Photon Transition in Rubidium
Authors:
Kyle W. Martin,
Gretchen Phelps,
Nathan D. Lemke,
Matthew S. Bigelow,
Benjamin Stuhl,
Michael Wojcik,
Michael Holt,
Ian Coddington,
Michael W. Bishop,
Johh H. Burke
Abstract:
Extra-laboratory atomic clocks are necessary for a wide array of applications (e.g. satellite-based navigation and communication). Building upon existing vapor cell and laser technologies, we describe an optical atomic clock, designed around a simple and manufacturable architecture, that utilizes the 778~nm two-photon transition in rubidium and yields fractional frequency instabilities of…
▽ More
Extra-laboratory atomic clocks are necessary for a wide array of applications (e.g. satellite-based navigation and communication). Building upon existing vapor cell and laser technologies, we describe an optical atomic clock, designed around a simple and manufacturable architecture, that utilizes the 778~nm two-photon transition in rubidium and yields fractional frequency instabilities of $3\times10^{-13}/\sqrt{τ(s)}$ for $τ$ from 1~s to 10000~s. We present a complete stability budget for this system and explore the required conditions under which a fractional frequency instability of $1\times 10^{-15}$ can be maintained on long timescales. We provide precise characterization of the leading sensitivities to external processes including magnetic fields and fluctuations of the vapor cell temperature and 778~nm laser power. The system is constructed primarily from commercially-available components, an attractive feature from the standpoint of commercialization and deployment of optical frequency standards.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Dual-comb spectroscopy with tailored spectral broadening in Si$_3$N$_4$ nanophotonics
Authors:
Esther Baumann,
Eli V. Hoenig,
Edgar F. Perez,
Gabriel M. Colacion,
Fabrizio R. Giorgetta,
Kevin C. Cossel,
Gabriel Ycas,
David R. Carlson,
Daniel D. Hickstein,
Kartik Srinivasan,
Scott B. Papp,
Nathan R. Newbury,
Ian Coddington
Abstract:
Si$_3$N$_4$ waveguides, pumped at 1550 nm, can provide spectrally smooth, broadband light for gas spectroscopy in the important 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m atmospheric water window, which is only partially accessible with silica-fiber based systems. By combining Er+:fiber frequency combs and supercontinuum generation in tailored Si$_3$N$_4$ waveguides, high signal-to-noise dual-comb spect…
▽ More
Si$_3$N$_4$ waveguides, pumped at 1550 nm, can provide spectrally smooth, broadband light for gas spectroscopy in the important 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m atmospheric water window, which is only partially accessible with silica-fiber based systems. By combining Er+:fiber frequency combs and supercontinuum generation in tailored Si$_3$N$_4$ waveguides, high signal-to-noise dual-comb spectroscopy (DCS) spanning 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m is demonstrated. Acquired broadband dual-comb spectra of CO and CO$_2$ agree well with database line shape models and have a spectral-signal-to-noise as high as 48$/\sqrt{\mathrm{s}}$, showing that the high coherence between the two combs is retained in the Si$_3$N$_4$ supercontinuum generation. The DCS figure of merit is 6$\times 10^6/\sqrt{\mathrm{s}}$, equivalent to that of all-fiber DCS systems in the 1.6 ${\mathrmμ}$m band. Based on these results, future DCS can combine fiber comb technology with Si$_3$N$_4$ waveguides to access new spectral windows in a robust non-laboratory platform.
△ Less
Submitted 14 November, 2018;
originally announced November 2018.
-
Fully self-referenced frequency comb consuming 5 Watts of electrical power
Authors:
Paritosh Manurkar,
Edgar F. Perez,
Daniel D. Hickstein,
David R. Carlson,
Jeff Chiles,
Daron A. Westly,
Esther Baumann,
Scott A. Diddams,
Nathan R. Newbury,
Kartik Srinivasan,
Scott B. Papp,
Ian Coddington
Abstract:
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fibe…
▽ More
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fiber oscillator/amplifier pumped by two 250-mW passively-cooled pump diodes that consume less than 5 W of electrical power. The temperature tuning of the oscillator, necessary to stabilize the repetition rate in the presence of environmental temperature changes, is achieved by resistive heating of a section of gold-palladium-coated fiber within the laser cavity. By heating only the small thermal mass of the fiber, the repetition rate is tuned over 4.2 kHz (corresponding to an effective temperature change of 4.2 °C) with a fast time constant of 0.5 s, at a low power consumption of 0.077 W/°C, compared to 2.5 W/°C in the conventional 200-MHz comb design.
△ Less
Submitted 18 September, 2018; v1 submitted 7 February, 2018;
originally announced February 2018.
-
Continuous regional trace gas source attribution using a field-deployed dual frequency comb spectrometer
Authors:
Sean Coburn,
Caroline B. Alden,
Robert Wright,
Kevin Cossel,
Esther Baumann,
Gar-Wing Truong,
Fabrizio Giorgetta,
Colm Sweeney,
Nathan R. Newbury,
Kuldeep Prasad,
Ian Coddington,
Gregory B. Rieker
Abstract:
Identification and quantification of trace gas sources is a major challenge for understanding and regulating air quality and greenhouse gas emissions. Current approaches either provide continuous but localized monitoring, or quasi-instantaneous 'snapshot-in-time' regional monitoring. There is a need for emissions detection that provides both continuous and regional coverage, because sources and si…
▽ More
Identification and quantification of trace gas sources is a major challenge for understanding and regulating air quality and greenhouse gas emissions. Current approaches either provide continuous but localized monitoring, or quasi-instantaneous 'snapshot-in-time' regional monitoring. There is a need for emissions detection that provides both continuous and regional coverage, because sources and sinks can be episodic and spatially variable. We field deploy a dual frequency comb laser spectrometer for the first time, enabling an observing system that provides continuous detection of trace gas sources over multiple-square-kilometer regions. Field tests simulating methane emissions from oil and gas production demonstrate detection and quantification of a 1.6 g min^-1 source (approximate emissions from a small pneumatic valve) from a distance of 1 km, and the ability to discern two leaks among a field of many potential sources. The technology achieves the goal of detecting, quantifying, and attributing emissions sources continuously through time, over large areas, and at emissions rates ~1000x lower than current regional approaches. It therefore provides a useful tool for monitoring and mitigating undesirable sources and closes a major information gap in the atmospheric sciences.
△ Less
Submitted 21 November, 2017;
originally announced November 2017.
-
High Coherence Mid-Infrared Dual Comb Spectroscopy Spanning 2.6 to 5.2 microns
Authors:
Gabriel Ycas,
Fabrizio R. Giorgetta,
Esther Baumann,
Ian Coddington,
Daniel Herman,
Scott A. Diddams,
Nathan R. Newbury
Abstract:
Mid-infrared dual-comb spectroscopy has the potential to supplant conventional high-resolution Fourier transform spectroscopy in applications that require high resolution, accuracy, signal-to-noise ratio, and speed. Until now, dual-comb spectroscopy in the mid-infrared has been limited to narrow optical bandwidths or to low signal-to-noise ratios. Using a combination of digital signal processing a…
▽ More
Mid-infrared dual-comb spectroscopy has the potential to supplant conventional high-resolution Fourier transform spectroscopy in applications that require high resolution, accuracy, signal-to-noise ratio, and speed. Until now, dual-comb spectroscopy in the mid-infrared has been limited to narrow optical bandwidths or to low signal-to-noise ratios. Using a combination of digital signal processing and broadband frequency conversion in waveguides, we demonstrate a mid-infrared dual-comb spectrometer that can measure comb-tooth resolved spectra across an octave of bandwidth in the mid-infrared from 2.6-5.2 $μ$m with sub-MHz frequency precision and accuracy and with a spectral signal-to-noise ratio as high as 6500. As a demonstration, we measure the highly structured, broadband cross-section of propane (C3H8) in the 2860-3020 cm-1 region, the complex phase/amplitude spectrum of carbonyl sulfide (COS) in the 2000 to 2100 cm-1 region, and the complex spectra of methane, acetylene, and ethane in the 2860-3400 cm-1 region.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Self-referenced frequency combs using high-efficiency silicon-nitride waveguides
Authors:
David R. Carlson,
Daniel D. Hickstein,
Alex Lind,
Stefan Droste,
Daron Westly,
Nima Nader,
Ian Coddington,
Nathan R. Newbury,
Kartik Srinivasan,
Scott A. Diddams,
Scott B. Papp
Abstract:
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octave…
▽ More
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octaves of spectral broadening with incident energies of only 110 pJ. Following supercontinuum generation, self-referencing is accomplished by mixing 780-nm dispersive-wave light with the frequency-doubled output of the fiber laser. In addition, at higher optical powers, we demonstrate f-to-3f self-referencing directly from the waveguide output by the interference of simultaneous supercontinuum and third harmonic generation, without the use of an external doubling crystal or interferometer. These hybrid comb systems combine the performance of fiber-laser frequency combs with the high nonlinearity and compactness of photonic waveguides, and should lead to low-cost, fully stabilized frequency combs for portable and space-borne applications.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Ultrabroadband supercontinuum generation and frequency-comb stabilization using on-chip waveguides with both cubic and quadratic nonlinearities
Authors:
Daniel D. Hickstein,
Hojoong Jung,
David R. Carlson,
Alex Lind,
Ian Coddington,
Kartik Srinivasan,
Gabriel G. Ycas,
Daniel C. Cole,
Abijith Kowligy,
Connor Fredrick,
Stefan Droste,
Erin S. Lamb,
Nathan R. Newbury,
Hong X. Tang,
Scott A. Diddams,
Scott B. Papp
Abstract:
Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercon…
▽ More
Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercontinuum generation, difference-frequency generation, second-harmonic generation, and third-harmonic generation. As one application of integrating multiple nonlinear processes, we measure and stabilize the carrier-envelope-offset frequency of a laser comb by direct photodetection of the output light. Additionally, we generate ~0.3 mW in the 3000 nm to 4000 nm region, which is potentially useful for molecular spectroscopy. The combination of broadband light generation from the visible through the mid-infrared, combined with simplified self-referencing, provides a path towards robust comb systems for spectroscopy and metrology in the field.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Accurate frequency referencing for fieldable dual-comb spectroscopy
Authors:
Gar-Wing Truong,
Eleanor M. Waxman,
Kevin C. Cossel,
Esther Baumann,
Andrew Klose,
Fabrizio R. Giorgetta,
William C. Swann,
Nathan R. Newbury,
Ian Coddington
Abstract:
A fieldable dual-comb spectrometer is described based on a "bootstrapped" frequency referencing scheme in which short-term optical phase coherence between combs is attained by referencing each to a free-running diode laser, whilst high frequency resolution and long-term accuracy is derived from a stable quartz oscillator. This fieldable dual-comb spectrometer was used to measure spectra with full…
▽ More
A fieldable dual-comb spectrometer is described based on a "bootstrapped" frequency referencing scheme in which short-term optical phase coherence between combs is attained by referencing each to a free-running diode laser, whilst high frequency resolution and long-term accuracy is derived from a stable quartz oscillator. This fieldable dual-comb spectrometer was used to measure spectra with full comb-tooth resolution spanning from 140 THz (2.14 um, 4670 cm^-1) to 184 THz (1.63 um, 6140 cm^-1) in the near infrared with a frequency sampling of 200 MHz (0.0067 cm^-1), ~ 120 kHz frequency resolution, and ~ 1 MHz frequency accuracy. High resolution spectra of water and carbon dioxide transitions at 1.77 um, 1.96 um and 2.06 um show that the molecular transmission acquired with this fieldable system did not deviate from those measured with a laboratory-based system (referenced to a maser and cavity-stabilized laser) to within 5.6x10^-4. Additionally, the fieldable system optimized for carbon dioxide quantification at 1.60 um, demonstrated a sensitivity of 2.8 ppm-km at 1 s integration time, improving to 0.10 ppm-km at 13 minutes of integration time.
△ Less
Submitted 30 November, 2016;
originally announced December 2016.
-
Synchronization of Distant Optical Clocks at the Femtosecond Level
Authors:
Jean-Daniel Deschenes,
Laura C. Sinclair,
Fabrizio R. Giorgetta,
William C. Swann,
Esther Baumann,
Hugo Bergeron,
Michael Cermak,
Ian Coddington,
Nathan R. Newbury
Abstract:
The use of optical clocks/oscillators in future ultra-precise navigation, gravitational sensing, coherent arrays, and relativity experiments will require time comparison and synchronization over terrestrial or satellite free-space links. Here we demonstrate full unambiguous synchronization of two optical timescales across a free-space link. The time deviation between synchronized timescales is bel…
▽ More
The use of optical clocks/oscillators in future ultra-precise navigation, gravitational sensing, coherent arrays, and relativity experiments will require time comparison and synchronization over terrestrial or satellite free-space links. Here we demonstrate full unambiguous synchronization of two optical timescales across a free-space link. The time deviation between synchronized timescales is below 1 fs over durations from 0.1 s to 6500 s, despite atmospheric turbulence and kilometer-scale path length variations. Over several days, the time wander is 40 fs peak-to-peak. Our approach relies on the two-way reciprocity of a single-spatial-mode optical link, valid to below 225 attoseconds across a turbulent 4-km path. This femtosecond level of time-frequency transfer should enable optical networks using state-of-the-art optical clocks/oscillators.
△ Less
Submitted 11 December, 2015; v1 submitted 25 September, 2015;
originally announced September 2015.
-
Mid-Infrared Optical Frequency Combs based on Difference Frequency Generation for Molecular Spectroscopy
Authors:
Flavio C. Cruz,
Daniel L. Maser,
Todd Johnson,
Gabriel Ycas,
Andrew Klose,
Fabrizio R. Giorgetta,
Ian Coddington,
Scott A. Diddams
Abstract:
Mid-infrared femtosecond optical frequency combs were produced by difference frequency generation of the spectral components of a near-infrared comb in a 3-mm-long MgO:PPLN crystal. We observe strong pump depletion and 9.3 dB parametric gain in the 1.5 μm signal, which yields powers above 500 mW (3 μW/mode) in the idler with spectra covering 2.8 μm to 3.5 μm. Potential for broadband, high-resoluti…
▽ More
Mid-infrared femtosecond optical frequency combs were produced by difference frequency generation of the spectral components of a near-infrared comb in a 3-mm-long MgO:PPLN crystal. We observe strong pump depletion and 9.3 dB parametric gain in the 1.5 μm signal, which yields powers above 500 mW (3 μW/mode) in the idler with spectra covering 2.8 μm to 3.5 μm. Potential for broadband, high-resolution molecular spectroscopy is demonstrated by absorption spectra and interferograms obtained by heterodyning two combs.
△ Less
Submitted 13 August, 2015;
originally announced August 2015.
-
Frequency Comb-Based Remote Sensing of Greenhouse Gases over Kilometer Air Paths
Authors:
Gregory B. Rieker,
Fabrizio R. Giorgetta,
William C. Swann,
Jon Kofler,
Alex M. Zolot,
Laura C. Sinclair,
Esther Baumann,
Christopher Cromer,
Gabrielle Petron,
Colm Sweeney,
Pieter P. Tans,
Ian Coddington,
Nathan R. Newbury
Abstract:
We demonstrate coherent dual frequency-comb spectroscopy for detecting variations in greenhouse gases. High signal-to-noise spectra are acquired spanning 5990 to 6260 cm^-1 (1600 to 1670 nm) covering ~700 absorption features from CO2, CH4, H2O, HDO, and 13CO2, across a 2-km open-air path. The transmission of each frequency comb tooth is resolved, leading to spectra with <1 kHz frequency accuracy,…
▽ More
We demonstrate coherent dual frequency-comb spectroscopy for detecting variations in greenhouse gases. High signal-to-noise spectra are acquired spanning 5990 to 6260 cm^-1 (1600 to 1670 nm) covering ~700 absorption features from CO2, CH4, H2O, HDO, and 13CO2, across a 2-km open-air path. The transmission of each frequency comb tooth is resolved, leading to spectra with <1 kHz frequency accuracy, no instrument lineshape, and a 0.0033-cm^-1 point spacing. The fitted path-averaged concentrations and temperature yield dry-air mole fractions. These are compared with a point sensor under well-mixed conditions to evaluate current absorption models for real atmospheres. In heterogeneous conditions, time-resolved data demonstrate tracking of strong variations in mole fractions. A precision of <1 ppm for CO2 and <3 ppb for CH4 is achieved in 5 minutes in this initial demonstration. Future portable systems could support regional emissions monitoring and validation of the spectral databases critical to global satellite-based trace gas monitoring.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Operation of an optically coherent frequency comb outside the metrology lab
Authors:
Laura C. Sinclair,
Ian Coddington,
William C. Swann,
Greg B. Rieker,
Archita Hati,
Kana Iwakuni,
Nathan R. Newbury
Abstract:
We demonstrate a self-referenced fiber frequency comb that can operate outside the well-controlled optical laboratory. The frequency comb has residual optical linewidths of < 1 Hz, sub-radian residual optical phase noise, and residual pulse-to-pulse timing jitter of 2.4 - 5 fs, when locked to an optical reference. This fully phase-locked frequency comb has been successfully operated in a moving ve…
▽ More
We demonstrate a self-referenced fiber frequency comb that can operate outside the well-controlled optical laboratory. The frequency comb has residual optical linewidths of < 1 Hz, sub-radian residual optical phase noise, and residual pulse-to-pulse timing jitter of 2.4 - 5 fs, when locked to an optical reference. This fully phase-locked frequency comb has been successfully operated in a moving vehicle with 0.5 g peak accelerations and on a shaker table with a sustained 0.5 g rms integrated acceleration, while retaining its optical coherence and 5-fs-level timing jitter. This frequency comb should enable metrological measurements outside the laboratory with the precision and accuracy that are the hallmarks of comb-based systems. Work of the U.S. government, not subject to copyright
△ Less
Submitted 20 December, 2013;
originally announced December 2013.
-
Optical two-way time and frequency transfer over free space
Authors:
Fabrizio R. Giorgetta,
William C. Swann,
Laura C. Sinclair,
Esther Baumann,
Ian Coddington,
Nathan R. Newbury
Abstract:
The transfer of high-quality time-frequency signals between remote locations underpins a broad range of applications including precision navigation and timing, the new field of clock-based geodesy, long-baseline interferometry, coherent radar arrays, tests of general relativity and fundamental constants, and the future redefinition of the second [1-7]. However, present microwave-based time-frequen…
▽ More
The transfer of high-quality time-frequency signals between remote locations underpins a broad range of applications including precision navigation and timing, the new field of clock-based geodesy, long-baseline interferometry, coherent radar arrays, tests of general relativity and fundamental constants, and the future redefinition of the second [1-7]. However, present microwave-based time-frequency transfer [8-10] is inadequate for state-of-the-art optical clocks and oscillators [1,11-15] that have femtosecond-level timing jitter and accuracies below 1E-17; as such, commensurate optically-based transfer methods are needed. While fiber-based optical links have proven suitable [16,17], they are limited to comparisons between fixed sites connected by a specialized bidirectional fiber link. With the exception of tests of the fundamental constants, most applications instead require more flexible connections between remote and possibly portable optical clocks and oscillators. Here we demonstrate optical time-frequency transfer over free-space via a two-way exchange between coherent frequency combs, each phase-locked to the local optical clock or oscillator. We achieve femtosecond-scale timing deviation, a residual instability below 1E-18 at 1000 s and systematic offsets below 4E-19, despite frequent signal fading due to atmospheric turbulence or obstructions across the 2-km link. This free-space transfer would already enable terrestrial links to support clock-based geodesy. If combined with satellite-based free-space optical communications, it provides a path toward global-scale geodesy, high-accuracy time-frequency distribution, satellite-based relativity experiments, and "optical GPS" for precision navigation.
△ Less
Submitted 20 November, 2012;
originally announced November 2012.
-
Spectroscopy of the Methane ν3 Band with an Accurate Mid-Infrared Coherent Dual- Comb Spectrometer
Authors:
E. Baumann,
F. R. Giorgetta,
W. C. Swann,
A. M. Zolot,
I. Coddington,
N. R. Newbury
Abstract:
We demonstrate a high-accuracy dual-comb spectrometer centered at 3.4 μm. The amplitude and phase spectra of the P, Q, and partial R-branch of the methane ν3 band are measured at 25 MHz to 100 MHz point spacing with ~kHz resolution and a signal-to-noise ratio of up to 3500. A fit of the absorbance and phase spectra yield the center frequency of 132 rovibrational lines. The systematic uncertainty i…
▽ More
We demonstrate a high-accuracy dual-comb spectrometer centered at 3.4 μm. The amplitude and phase spectra of the P, Q, and partial R-branch of the methane ν3 band are measured at 25 MHz to 100 MHz point spacing with ~kHz resolution and a signal-to-noise ratio of up to 3500. A fit of the absorbance and phase spectra yield the center frequency of 132 rovibrational lines. The systematic uncertainty is estimated to be 300 kHz, which is 10-3 of the Doppler width and a tenfold improvement over Fourier transform spectroscopy. These data are the first high- accuracy molecular spectra obtained with a direct comb spectrometer.
△ Less
Submitted 6 October, 2011;
originally announced October 2011.
-
Coherent Dual Comb Spectroscopy at High Signal to Noise
Authors:
I. Coddington,
W. C. Swann,
N. R. Newbury
Abstract:
Two frequency combs can be used to measure the full complex response of a sample in a configuration which can be alternatively viewed as the equivalent of a dispersive Fourier transform spectrometer, infrared time domain spectrometer, or a multiheterodyne laser spectrometer. This dual comb spectrometer retains the frequency accuracy and resolution inherent to the comb sources. We discuss, in detai…
▽ More
Two frequency combs can be used to measure the full complex response of a sample in a configuration which can be alternatively viewed as the equivalent of a dispersive Fourier transform spectrometer, infrared time domain spectrometer, or a multiheterodyne laser spectrometer. This dual comb spectrometer retains the frequency accuracy and resolution inherent to the comb sources. We discuss, in detail, the specific design of our coherent dual-comb spectrometer and demonstrate the potential of this technique by measuring the first overtone vibration of hydrogen cyanide, centered at 194 THz (1545 nm). We measure the fully normalized, complex response of the gas over a 9 THz bandwidth at 220 MHz frequency resolution yielding 41,000 resolution elements. The average spectral signal-to-noise ratio (SNR) is 2,500 for both the fractional absorption and the phase, with a peak SNR of 4,000 corresponding to a fractional absorption sensitivity of 0.025% and phase sensitivity of 250 microradians. As the spectral coverage of combs expands, this dual-comb spectroscopy could provide high frequency accuracy and resolution measurements of a complex sample response across a range of spectral regions.
△ Less
Submitted 10 September, 2010; v1 submitted 21 January, 2010;
originally announced January 2010.
-
Coherent, multi-heterodyne spectroscopy using stabilized optical frequency combs
Authors:
Ian Coddington,
William C. Swann,
Nathan R. Newbury
Abstract:
The broadband, coherent nature of narrow-linewidth fiber frequency combs is exploited to measure the full complex spectrum of a molecular gas through multi-heterodyne spectroscopy. We measure the absorption and phase shift experienced by each of 155,000 individual frequency comb lines, spaced by 100 MHz and spanning from 1495 nm to 1620 nm, after passing through a hydrogen cyanide gas. The measu…
▽ More
The broadband, coherent nature of narrow-linewidth fiber frequency combs is exploited to measure the full complex spectrum of a molecular gas through multi-heterodyne spectroscopy. We measure the absorption and phase shift experienced by each of 155,000 individual frequency comb lines, spaced by 100 MHz and spanning from 1495 nm to 1620 nm, after passing through a hydrogen cyanide gas. The measured phase spectrum agrees with Kramers-Kronig transformation of the absorption spectrum. This technique can provide a full complex spectrum rapidly, over wide bandwidths, and with hertz-level accuracy.
△ Less
Submitted 17 October, 2007;
originally announced October 2007.
-
On Dispersive and Classical Shock Waves in Bose-Einstein Condensates and Gas Dynamics
Authors:
M. A. Hoefer,
M. J. Ablowitz,
I. Coddington,
E. A. Cornell,
P. Engels,
V. Schweikhard
Abstract:
A Bose-Einstein condensate (BEC) is a quantum fluid that gives rise to interesting shock wave nonlinear dynamics. Experiments depict a BEC that exhibits behavior similar to that of a shock wave in a compressible gas, eg. traveling fronts with steep gradients. However, the governing Gross-Pitaevskii (GP) equation that describes the mean field of a BEC admits no dissipation hence classical dissipa…
▽ More
A Bose-Einstein condensate (BEC) is a quantum fluid that gives rise to interesting shock wave nonlinear dynamics. Experiments depict a BEC that exhibits behavior similar to that of a shock wave in a compressible gas, eg. traveling fronts with steep gradients. However, the governing Gross-Pitaevskii (GP) equation that describes the mean field of a BEC admits no dissipation hence classical dissipative shock solutions do not explain the phenomena. Instead, wave dynamics with small dispersion is considered and it is shown that this provides a mechanism for the generation of a dispersive shock wave (DSW). Computations with the GP equation are compared to experiment with excellent agreement. A comparison between a canonical 1D dissipative and dispersive shock problem shows significant differences in shock structure and shock front speed. Numerical results associated with the three dimensional experiment show that three and two dimensional approximations are in excellent agreement and one dimensional approximations are in good qualitative agreement. Using one dimensional DSW theory it is argued that the experimentally observed blast waves may be viewed as dispersive shock waves.
△ Less
Submitted 14 March, 2006;
originally announced March 2006.
-
Vortex Lattice Dynamics in Rotating Spinor Bose-Einstein Condensates
Authors:
V. Schweikhard,
I. Coddington,
P. Engels,
S. Tung,
E. A. Cornell
Abstract:
We observe interlaced square vortex lattices in rotating two-component dilute-gas Bose-Einstein condensates (BEC). After preparing a hexagonal vortex lattice in a single-component BEC in an internal state $|1>$ of $^{87}$Rb atoms, we coherently transfer a fraction of the superfluid to a different internal state $|2>$. The subsequent evolution of this pseudo-spin-1/2 superfluid towards a state of…
▽ More
We observe interlaced square vortex lattices in rotating two-component dilute-gas Bose-Einstein condensates (BEC). After preparing a hexagonal vortex lattice in a single-component BEC in an internal state $|1>$ of $^{87}$Rb atoms, we coherently transfer a fraction of the superfluid to a different internal state $|2>$. The subsequent evolution of this pseudo-spin-1/2 superfluid towards a state of offset square lattices involves an intriguing interplay of phase-separation and -mixing dynamics, both macroscopically and on the length scale of the vortex cores, and a stage of vortex turbulence. Stability of the square lattice structure is confirmed via the application of shear perturbations, after which the structure relaxes back to the square configuration. We use an interference technique to show the spatial offset between the two vortex lattices. Vortex cores in either component are filled by fluid of the other component, such that the spin-1/2 order parameter forms a Skyrmion lattice.
△ Less
Submitted 23 November, 2004; v1 submitted 11 October, 2004;
originally announced October 2004.
-
Observations on Sound Propagation in Rapidly Rotating Bose-Einstein Condensates
Authors:
T. P. Simula,
P. Engels,
I. Coddington,
V. Schweikhard,
E. A. Cornell,
R. J. Ballagh
Abstract:
Repulsive laser potential pulses applied to vortex lattices of rapidly rotating Bose-Einstein condensates create propagating density waves which we have observed experimentally and modeled computationally to high accuracy. We have observed a rich variety of dynamical phenomena ranging from interference effects and shock-wave formation to anisotropic sound propagation.
Repulsive laser potential pulses applied to vortex lattices of rapidly rotating Bose-Einstein condensates create propagating density waves which we have observed experimentally and modeled computationally to high accuracy. We have observed a rich variety of dynamical phenomena ranging from interference effects and shock-wave formation to anisotropic sound propagation.
△ Less
Submitted 25 November, 2004; v1 submitted 13 July, 2004;
originally announced July 2004.
-
Experimental studies of equilibrium vortex properties in a Bose-condensed gas
Authors:
I. Coddington,
P. C. Haljan,
P. Engels,
V. Schweikhard,
S. Tung,
E. A. Cornell
Abstract:
We characterize several equilibrium vortex effects in a rotating Bose-Einstein condensate. Specifically we attempt precision measurements of vortex lattice spacing and the vortex core size over a range of condensate densities and rotation rates. These measurements are supplemented by numerical simulations, and both experimental and numerical data are compared to theory predictions of Sheehy and…
▽ More
We characterize several equilibrium vortex effects in a rotating Bose-Einstein condensate. Specifically we attempt precision measurements of vortex lattice spacing and the vortex core size over a range of condensate densities and rotation rates. These measurements are supplemented by numerical simulations, and both experimental and numerical data are compared to theory predictions of Sheehy and Radzihovsky [17] (cond-mat/0402637) and Baym and Pethick [25] (cond-mat/0308325). Finally, we study the effect of the centrifugal weakening of the trap** spring constants on the critical temperature for quantum degeneracy and the effects of finite temperature on vortex contrast.
△ Less
Submitted 4 October, 2004; v1 submitted 12 May, 2004;
originally announced May 2004.
-
Rapidly Rotating Bose-Einstein Condensates in and near the Lowest Landau Level
Authors:
V. Schweikhard,
I. Coddington,
P. Engels,
V. P. Mogendorff,
E. A. Cornell
Abstract:
We create rapidly rotating Bose-Einstein condensates in the lowest Landau level, by spinning up the condensates to rotation rates $Ω>99%$ of the centrifugal limit for a harmonically trapped gas, while reducing the number of atoms. As a consequence, the chemical potential drops below the cyclotron energy $2\hbarΩ$. While in this mean-field quantum Hall regime we still observe an ordered vortex la…
▽ More
We create rapidly rotating Bose-Einstein condensates in the lowest Landau level, by spinning up the condensates to rotation rates $Ω>99%$ of the centrifugal limit for a harmonically trapped gas, while reducing the number of atoms. As a consequence, the chemical potential drops below the cyclotron energy $2\hbarΩ$. While in this mean-field quantum Hall regime we still observe an ordered vortex lattice, its elastic shear strength is strongly reduced, as evidenced by the observed very low frequency of Tkachenko modes. Furthermore, the gas approaches the quasi-two-dimensional limit. The associated cross-over from interacting- to ideal-gas behavior along the rotation axis results in a shift of the axial breathing mode frequency.
△ Less
Submitted 24 November, 2003; v1 submitted 27 August, 2003;
originally announced August 2003.
-
Observation of Tkachenko Oscillations in Rapidly Rotating Bose-Einstein Condensates
Authors:
I. Coddington,
P. Engels,
V. Schweikhard,
E. A. Cornell
Abstract:
We directly image Tkachenko waves in a vortex lattice in a dilute-gas Bose-Einstein condensate. The low (sub-Hz) resonant frequencies are a consequence of the small but nonvanishing elastic shear modulus of the vortex-filled superfluid. The frequencies are measured for rotation rates as high as 98% of the centrifugal limit for the harmonically confined gas. Agreement with a hydrodynamic theory w…
▽ More
We directly image Tkachenko waves in a vortex lattice in a dilute-gas Bose-Einstein condensate. The low (sub-Hz) resonant frequencies are a consequence of the small but nonvanishing elastic shear modulus of the vortex-filled superfluid. The frequencies are measured for rotation rates as high as 98% of the centrifugal limit for the harmonically confined gas. Agreement with a hydrodynamic theory worsens with increasing rotation rate, perhaps due to the increasing fraction of the volume displaced by the vortex cores. We also observe two low-lying m=0 longitudinal modes at about 20 times higher frequency.
△ Less
Submitted 22 September, 2003; v1 submitted 1 May, 2003;
originally announced May 2003.
-
Observation of Long-lived Vortex Aggregates in Rapidly Rotating Bose-Einstein Condensates
Authors:
P. Engels,
I. Coddington,
P. C. Haljan,
V. Schweikhard,
E. A. Cornell
Abstract:
We study the formation of large vortex aggregates in a rapidly rotating dilute-gas Bose-Einstein condensate. When we remove atoms from the rotating condensate with a tightly focused, resonant laser, the density can be locally suppressed, while fast circulation of a ring-shaped superflow around the area of suppressed density is maintained. Thus a giant vortex core comprising 7 to 60 phase singula…
▽ More
We study the formation of large vortex aggregates in a rapidly rotating dilute-gas Bose-Einstein condensate. When we remove atoms from the rotating condensate with a tightly focused, resonant laser, the density can be locally suppressed, while fast circulation of a ring-shaped superflow around the area of suppressed density is maintained. Thus a giant vortex core comprising 7 to 60 phase singularities is formed. The giant core is only metastable, and it will refill with distinguishable single vortices after many rotation cycles. The surprisingly long lifetime of the core can be attributed to the influence of strong Coriolis forces in the condensate. In addition we have been able to follow the precession of off-center giant vortices for more than 20 cycles.
△ Less
Submitted 27 January, 2003;
originally announced January 2003.
-
Nonequilibrium effects of anisotropic compression applied to vortex lattices in Bose-Einstein condensates
Authors:
P. Engels,
I. Coddington,
P. C. Haljan,
E. A. Cornell
Abstract:
We have studied the dynamics of large vortex lattices in a dilute-gas Bose-Einstein condensate. While undisturbed lattices have a regular hexagonal structure, large-amplitude quadrupolar shape oscillations of the condensate are shown to induce a wealth of nonequilibrium lattice dynamics. When exciting an m = -2 mode, we observe shifting of lattice planes, changes of lattice structure, and sheet-…
▽ More
We have studied the dynamics of large vortex lattices in a dilute-gas Bose-Einstein condensate. While undisturbed lattices have a regular hexagonal structure, large-amplitude quadrupolar shape oscillations of the condensate are shown to induce a wealth of nonequilibrium lattice dynamics. When exciting an m = -2 mode, we observe shifting of lattice planes, changes of lattice structure, and sheet-like structures in which individual vortices appear to have merged. Excitation of an m = +2 mode dissolves the regular lattice, leading to randomly arranged but still strictly parallel vortex lines.
△ Less
Submitted 20 April, 2002;
originally announced April 2002.
-
Driving Bose-Einstein condensate vorticity with a rotating normal cloud
Authors:
P. C. Haljan,
I. Coddington,
P. Engels,
E. A. Cornell
Abstract:
We have developed an evaporative cooling technique that accelerates the circulation of an ultra-cold $^{87}$Rb gas, confined in a static harmonic potential. As a normal gas is evaporatively spun up and cooled below quantum degeneracy, it is found to nucleate vorticity in a Bose-Einstein condensate. Measurements of the condensate's aspect ratio and surface-wave excitations are consistent with eff…
▽ More
We have developed an evaporative cooling technique that accelerates the circulation of an ultra-cold $^{87}$Rb gas, confined in a static harmonic potential. As a normal gas is evaporatively spun up and cooled below quantum degeneracy, it is found to nucleate vorticity in a Bose-Einstein condensate. Measurements of the condensate's aspect ratio and surface-wave excitations are consistent with effective rigid-body rotation. Rotation rates of up to 94% of the centrifugal limit are inferred. A threshold in the normal cloud's rotation is observed for the intrinsic nucleation of the first vortex. The threshold value lies below the prediction for a nucleation mechanism involving the excitation of surface-waves of the ground-state condensate.
△ Less
Submitted 18 June, 2001;
originally announced June 2001.
-
Using surface-wave spectroscopy to characterize tilt modes of a vortex in a Bose-Einstein Condensate
Authors:
P. C. Haljan,
B. P. Anderson,
I. Coddington,
E. A. Cornell
Abstract:
A vortex in a condensate in a nonspherical trap** potential will in general experience a torque. The torque will induce tilting of the direction of the vortex axis. We observe this behavior experimentally and show that by applying small distortions to the trap** potential, we can control the tilting behaviour. By suppressing vortex tilt, we have been able to hold the vortex axis along the li…
▽ More
A vortex in a condensate in a nonspherical trap** potential will in general experience a torque. The torque will induce tilting of the direction of the vortex axis. We observe this behavior experimentally and show that by applying small distortions to the trap** potential, we can control the tilting behaviour. By suppressing vortex tilt, we have been able to hold the vortex axis along the line of sight for up to 15 seconds. Alternatively, we can induce a 180 degree tilt, effectively reversing the charge on the vortex as observed in the lab frame. We characterize the vortex non-destructively with a surface-wave spectroscopic technique.
△ Less
Submitted 18 December, 2000;
originally announced December 2000.