Showing 1–43 of 43 results for author: Cococcioni, m

Compressed Real Numbers for AI: a case-study using a RISC-V CPU

Authors: Federico Rossi, Marco Cococcioni, Roger Ferrer Ibàñez, Jesùs Labarta, Filippo Mantovani, Marc Casas, Emanuele Ruffaldi, Sergio Saponara

Abstract: As recently demonstrated, Deep Neural Networks (DNN), usually trained using single precision IEEE 754 floating point numbers (binary32), can also work using lower precision. Therefore, 16-bit and 8-bit compressed format have attracted considerable attention. In this paper, we focused on two families of formats that have already achieved interesting results in compressing binary32 numbers in machin… ▽ More As recently demonstrated, Deep Neural Networks (DNN), usually trained using single precision IEEE 754 floating point numbers (binary32), can also work using lower precision. Therefore, 16-bit and 8-bit compressed format have attracted considerable attention. In this paper, we focused on two families of formats that have already achieved interesting results in compressing binary32 numbers in machine learning applications, without sensible degradation of the accuracy: bfloat and posit. Even if 16-bit and 8-bit bfloat/posit are routinely used for reducing the storage of the weights/biases of trained DNNs, the inference still often happens on the 32-bit FPU of the CPU (especially if GPUs are not available). In this paper we propose a way to decompress a tensor of bfloat/posits just before computations, i.e., after the compressed operands have been loaded within the vector registers of a vector capable CPU, in order to save bandwidth usage and increase cache efficiency. Finally, we show the architectural parameters and considerations under which this solution is advantageous with respect to the uncompressed one. △ Less

Submitted 11 September, 2023; originally announced September 2023.

PPU: Design and Implementation of a Pipelined Full Posit Processing Unit

Authors: Federico Rossi, Francesco Urbani, Marco Cococcioni, Emanuele Ruffaldi, Sergio Saponara

Abstract: By exploiting the modular RISC-V ISA this paper presents the customization of instruction set with posit\textsuperscript{\texttrademark} arithmetic instructions to provide improved numerical accuracy, well-defined behavior and increased range of representable numbers while kee** the flexibility and benefits of open-source ISA, like no licensing and royalty fee and community development. In this… ▽ More By exploiting the modular RISC-V ISA this paper presents the customization of instruction set with posit\textsuperscript{\texttrademark} arithmetic instructions to provide improved numerical accuracy, well-defined behavior and increased range of representable numbers while kee** the flexibility and benefits of open-source ISA, like no licensing and royalty fee and community development. In this work we present the design, implementation and integration into the low-power Ibex RISC-V core of a full posit processing unit capable to directly implement in hardware the four arithmetic operations (add, sub, mul, div and fma), the inversion, the float-to-posit and posit-to-float conversions. We evaluate speed, power and area of this unit (that we have called Full Posit Processing Unit). The FPPU has been prototyped on Alveo and Kintex FPGAs, and its impact on the metrics of the full-RISC-V core have been evaluated, showing that we can provide real number processing capabilities to the mentioned core with an increase in area limited to $7\%$ for 8-bit posits and to $15\%$ for 16-bit posits. Finally we present tests one the use of posits for deep neural networks with different network models and datasets, showing minimal drop in accuracy when using 16-bit posits instead of 32-bit IEEE floats. △ Less

Submitted 8 April, 2024; v1 submitted 7 August, 2023; originally announced August 2023.

Ternary oxides of $\textit{s}$- and $\textit{p}$-block metals for photocatalytic solar-to-hydrogen conversion

Authors: Simon Gelin, Nicole E. Kirchner-Hall, Rowan R. Katzbaer, Monica J. Theibault, Yihuang Xiong, Wayne Zhao, Mohammed M. Khan, Eric Andrewlavage, Paul Orbe, Steven M. Baksa, Matteo Cococcioni, Iurii Timrov, Quinn Campbell, Héctor Abruña, Raymond E. Schaak, Ismaila Dabo

Abstract: Oxides containing metals or metalloids from the {\it p}-block of the periodic table ({\it e.g.}, In, Sn, Sb, Pb, Bi) are of technological interest as transparent conductors and light absorbers for solar energy conversion due to the tunability of their electronic conductivity and optical absorption. Comparatively, these oxides have found limited applications in hydrogen photoelectrolysis primarily… ▽ More Oxides containing metals or metalloids from the {\it p}-block of the periodic table ({\it e.g.}, In, Sn, Sb, Pb, Bi) are of technological interest as transparent conductors and light absorbers for solar energy conversion due to the tunability of their electronic conductivity and optical absorption. Comparatively, these oxides have found limited applications in hydrogen photoelectrolysis primarily due to their high electronegativity, which impedes electron transfer for reducing protons into hydrogen. We have shown recently that inserting {\it s}-block cations into {\it p}-block metal oxides is effective at lowering electronegativities while affording further control of band gaps. Here, we explain the origins of this dual tunability by demonstrating the mediator role of {\it s}-block cations in modulating orbital hybridization while not contributing to frontier electronic states. From this result, we carry out a comprehensive computational study of 109 ternary oxides of {\it s}- and {\it p}-block metal elements as candidate photocatalysts for solar hydrogen generation. We downselect the most desirable materials using band gaps and band edges obtained from Hubbard-corrected density-functional theory with Hubbard parameters computed entirely from first principles, evaluate the stability of these oxides in aqueous conditions, and characterize experimentally four of the remaining materials, synthesized with high phase uniformity, to validate and further develop the computational models. We thus propose nine oxide semiconductors, including CsIn$_3$O$_5$, Sr$_2$In$_2$O$_5$, and KSbO$_2$ which, to the extent of our literature review, have not been previously considered as water-splitting photocatalysts. △ Less

Submitted 18 December, 2023; v1 submitted 6 March, 2023; originally announced March 2023.

Comments: 14 pages, 5 figures, 1 supplemental material

Accurate electronic properties and intercalation voltages of olivine-type Li-ion cathode materials from extended Hubbard functionals

Authors: Iurii Timrov, Francesco Aquilante, Matteo Cococcioni, Nicola Marzari

Abstract: The design of novel cathode materials for Li-ion batteries would greatly benefit from accurate first-principles predictions of structural, electronic, and magnetic properties as well as intercalation voltages in compounds containing transition-metal elements. For such systems, density-functional theory (DFT) with standard (semi-)local exchange-correlation functionals is of limited use as it often… ▽ More The design of novel cathode materials for Li-ion batteries would greatly benefit from accurate first-principles predictions of structural, electronic, and magnetic properties as well as intercalation voltages in compounds containing transition-metal elements. For such systems, density-functional theory (DFT) with standard (semi-)local exchange-correlation functionals is of limited use as it often fails due to strong self-interaction errors that are especially relevant in the partially filled $d$ shells. Here, we perform a detailed comparative study of the phospho-olivine cathode materials Li$_x$MnPO$_4$, Li$_x$FePO$_4$, and the mixed transition metal Li$_x$Mn$_{1/2}$Fe$_{1/2}$PO$_4$ ($x=0, 1/4, 1/2, 3/4, 1$) using four electronic-structure methods: DFT, DFT+$U$, DFT+$U$+$V$, and HSE06. We show that DFT+$U$+$V$, with onsite $U$ and intersite $V$ Hubbard parameters determined from first principles and self-consistently with respect to the structural parameters by means of density-functional perturbation theory (linear response), provides the most accurate description of the electronic structure of these challenging compounds. In particular, we demonstrate that DFT+$U$+$V$ displays very clearly "digital" changes in oxidation states of the transition-metal ions in all compounds, including the mixed-valence phases occurring at intermediate Li concentrations, leading to voltages in remarkable agreement with experiments. We show that the inclusion of intersite Hubbard interactions is essential for the accurate prediction of thermodynamic quantities, balancing the drive for localization induced by the onsite $U$ with intersite $V$ orbital hybridizations. △ Less

Submitted 2 November, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Journal ref: PRX Energy 1, 033003 (2022)

HP -- A code for the calculation of Hubbard parameters using density-functional perturbation theory

Authors: Iurii Timrov, Nicola Marzari, Matteo Cococcioni

Abstract: We introduce HP, an implementation of density-functional perturbation theory, designed to compute Hubbard parameters (on-site $U$ and inter-site $V$) in the framework of DFT+$U$ and DFT+$U$+$V$. The code does not require the use of computationally expensive supercells of the traditional linear-response approach; instead, unit cells are used with monochromatic perturbations that significantly reduc… ▽ More We introduce HP, an implementation of density-functional perturbation theory, designed to compute Hubbard parameters (on-site $U$ and inter-site $V$) in the framework of DFT+$U$ and DFT+$U$+$V$. The code does not require the use of computationally expensive supercells of the traditional linear-response approach; instead, unit cells are used with monochromatic perturbations that significantly reduce the computational cost of determining Hubbard parameters. HP is an open-source software distributed under the terms of the GPL as a component of Quantum ESPRESSO. As with other components, HP is optimized to run on a variety of different platforms, from laptops to massively parallel architectures, using native mathematical libraries (LAPACK and FFTW) and a hierarchy of custom parallelization layers built on top of MPI. The effectiveness of the code is showcased by computing Hubbard parameters self-consistently for the phospho-olivine Li$_x$Mn$_{1/2}$Fe$_{1/2}$PO$_4$ ($x=0, 1/2, 1$) and by highlighting the accuracy of predictions of the geometry and Li intercalation voltages. △ Less

Submitted 8 July, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Journal ref: Comput. Phys. Commun. 279, 108455 (2022)

A Non-Archimedean Interior Point Method for Solving Lexicographic Multi-Objective Quadratic Programming Problems

Authors: Lorenzo Fiaschi, Marco Cococcioni

Abstract: This work presents a generalized implementation of the infeasible primal-dual Interior Point Method (IPM) achieved by the use of non-Archimedean values, i.e., infinite and infinitesimal numbers. The extended version, called here non-Archimedean IPM (NA-IPM), is able to solve a wider variety of linear and quadratic optimization problems than its standard counterpart. Among them, the lexicographic m… ▽ More This work presents a generalized implementation of the infeasible primal-dual Interior Point Method (IPM) achieved by the use of non-Archimedean values, i.e., infinite and infinitesimal numbers. The extended version, called here non-Archimedean IPM (NA-IPM), is able to solve a wider variety of linear and quadratic optimization problems than its standard counterpart. Among them, the lexicographic multi-objective one deserves particular attention, since NA-IPM overcomes the issues that standard techniques (such as scalarization or preemptive approach) have. In addition, infeasibility and unboundedness are no more corner cases to care of: by means of a mild embedding (addition of two variables and one constraint) NA-IPM implicitly and transparently manages their possible presence. To support the theoretical properties of NA-IPM, the manuscript also shows four linear and quadratic non-Archimedean programming test cases where the effectiveness of the algorithm is verified. This also stresses that NA-IPM is not just a mere symbolic or theoretical algorithm but actually a concrete numerical tool. Finally, the results of this study prove that non-Archimedean scientific computing is an extension of the standard one, suggesting it might have a huge number of practical applications in the near future in co** with both already existing and new real-world problems. △ Less

Submitted 29 October, 2021; originally announced October 2021.

Journal ref: Mathematics, 10(23):4536, 2022

Ab initio electron-phonon interactions in correlated electron systems

Authors: **-Jian Zhou, **soo Park, Iurii Timrov, Andrea Floris, Matteo Cococcioni, Nicola Marzari, Marco Bernardi

Abstract: Electron-phonon ($e$-ph) interactions are pervasive in condensed matter, governing phenomena such as transport, superconductivity, charge-density waves, polarons and metal-insulator transitions. First-principles approaches enable accurate calculations of $e$-ph interactions in a wide range of solids. However, they remain an open challenge in correlated electron systems (CES), where density functio… ▽ More Electron-phonon ($e$-ph) interactions are pervasive in condensed matter, governing phenomena such as transport, superconductivity, charge-density waves, polarons and metal-insulator transitions. First-principles approaches enable accurate calculations of $e$-ph interactions in a wide range of solids. However, they remain an open challenge in correlated electron systems (CES), where density functional theory often fails to describe the ground state. Therefore reliable $e$-ph calculations remain out of reach for many transition metal oxides, high-temperature superconductors, Mott insulators, planetary materials and multiferroics. Here we show first-principles calculations of $e$-ph interactions in CES, using the framework of Hubbard-corrected density functional theory (DFT+$U$ ) and its linear response extension (DFPT+$U$), which can describe the electronic structure and lattice dynamics of many CES. We showcase the accuracy of this approach for a prototypical Mott system, CoO, carrying out a detailed investigation of its $e$-ph interactions and electron spectral functions. While standard DFPT gives unphysically divergent and short-ranged $e$-ph interactions, DFPT+$U$ is shown to remove the divergences and properly account for the long-range Fröhlich interaction, allowing us to model polaron effects in a Mott insulator. Our work establishes a broadly applicable and affordable approach for quantitative studies of e-ph interactions in CES, a novel theoretical tool to interpret experiments in this broad class of materials. △ Less

Submitted 19 March, 2021; v1 submitted 12 February, 2021; originally announced February 2021.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 127, 126404 (2021)

Optimizing accuracy and efficacy in data-driven materials discovery for the solar production of hydrogen

Authors: Yihuang Xiong, Quinn T. Campbell, Julian Fanghanel, Catherine K. Badding, Huaiyu Wang, Nicole E. Kirchner-Hall, Monica J. Theibault, Iurii Timrov, Jared S. Mondschein, Kriti Seth, Rebecca Katz, Andres Molina Villarino, Betül Pamuk, Megan E. Penrod, Mohammed M. Khan, Tiffany Rivera, Nathan C. Smith, Xavier Quintana, Paul Orbe, Craig J. Fennie, Senorpe Asem-Hiablie, James L. Young, Todd G. Deutsch, Matteo Cococcioni, Venkatraman Gopalan , et al. (3 additional authors not shown)

Abstract: The production of hydrogen fuels, via water splitting, is of practical relevance for meeting global energy needs and mitigating the environmental consequences of fossil-fuel-based transportation. Water photoelectrolysis has been proposed as a viable approach for generating hydrogen, provided that stable and inexpensive photocatalysts with conversion efficiencies over 10% can be discovered, synthes… ▽ More The production of hydrogen fuels, via water splitting, is of practical relevance for meeting global energy needs and mitigating the environmental consequences of fossil-fuel-based transportation. Water photoelectrolysis has been proposed as a viable approach for generating hydrogen, provided that stable and inexpensive photocatalysts with conversion efficiencies over 10% can be discovered, synthesized at scale, and successfully deployed (Pinaud et al., Energy Environ. Sci., 2013, 6, 1983). While a number of first-principles studies have focused on the data-driven discovery of photocatalysts, in the absence of systematic experimental validation, the success rate of these predictions may be limited. We address this problem by develo** a screening procedure with co-validation between experiment and theory to expedite the synthesis, characterization, and testing of the computationally predicted, most desirable materials. Starting with 70,150 compounds in the Materials Project database, the proposed protocol yielded 71 candidate photocatalysts, 11 of which were synthesized as single-phase materials. Experiments confirmed hydrogen generation and favorable band alignment for 6 of the 11 compounds, with the most promising ones belonging to the families of alkali and alkaline-earth indates and orthoplumbates. This study shows the accuracy of a nonempirical, Hubbard-corrected density-functional theory method to predict band gaps and band offsets at a fraction of the computational cost of hybrid functionals, and outlines an effective strategy to identify photocatalysts for solar hydrogen generation. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Self-consistent Hubbard parameters from density-functional perturbation theory in the ultrasoft and projector-augmented wave formulations

Authors: Iurii Timrov, Nicola Marzari, Matteo Cococcioni

Abstract: The self-consistent evaluation of Hubbard parameters using linear-response theory is crucial for quantitatively predictive calculations based on Hubbard-corrected density-functional theory. Here, we extend a recently-introduced approach based on density-functional perturbation theory (DFPT) for the calculation of the on-site Hubbard $U$ to also compute the inter-site Hubbard $V$. DFPT allows to re… ▽ More The self-consistent evaluation of Hubbard parameters using linear-response theory is crucial for quantitatively predictive calculations based on Hubbard-corrected density-functional theory. Here, we extend a recently-introduced approach based on density-functional perturbation theory (DFPT) for the calculation of the on-site Hubbard $U$ to also compute the inter-site Hubbard $V$. DFPT allows to reduce significantly computational costs, improve numerical accuracy, and fully automate the calculation of the Hubbard parameters by recasting the linear response of a localized perturbation into an array of monochromatic perturbations that can be calculated in the primitive cell. In addition, here we generalize the entire formalism from norm-conserving to ultrasoft and projector-augmented wave formulations, and to metallic ground states. After benchmarking DFPT against the conventional real-space Hubbard linear response in a supercell, we demonstrate the effectiveness of the present extended Hubbard formulation in determining the equilibrium crystal structure of Li$_x$MnPO$_4$ (x=0,1) and the subtle energetics of Li intercalation. △ Less

Submitted 1 February, 2021; v1 submitted 6 November, 2020; originally announced November 2020.

Comments: 15 pages, 3 figures

Journal ref: Phys. Rev. B 103, 045141 (2021)

Pulay forces in density-functional theory with extended Hubbard functionals: From nonorthogonalized to orthogonalized manifolds

Authors: Iurii Timrov, Francesco Aquilante, Luca Binci, Matteo Cococcioni, Nicola Marzari

Abstract: We present a derivation of the exact expression for Pulay forces in density-functional theory calculations augmented with extended Hubbard functionals, and arising from the use of orthogonalized atomic orbitals as projectors for the Hubbard manifold. The derivative of the inverse square root of the orbital overlap matrix is obtained as a closed-form solution of the associated Lyapunov (Sylvester)… ▽ More We present a derivation of the exact expression for Pulay forces in density-functional theory calculations augmented with extended Hubbard functionals, and arising from the use of orthogonalized atomic orbitals as projectors for the Hubbard manifold. The derivative of the inverse square root of the orbital overlap matrix is obtained as a closed-form solution of the associated Lyapunov (Sylvester) equation. The expression for the resulting contribution to the forces is presented in the framework of ultrasoft pseudopotentials and the projector-augmented-wave method, and using a plane wave basis set. We have benchmarked the present implementation with respect to finite differences of total energies for the case of NiO, finding excellent agreement. Owing to the accuracy of Hubbard-corrected density-functional theory calculations - provided the Hubbard parameters are computed for the manifold under consideration - the present work paves the way for systematic studies of solid-state and molecular transition-metal and rare-earth compounds. △ Less

Submitted 12 May, 2022; v1 submitted 26 October, 2020; originally announced October 2020.

Comments: 16 pages, 1 figure

Journal ref: Phys. Rev. B 102, 235159 (2020)

Electronic structure of pristine and Ni-substituted LaFeO$_3$ from near edge x-ray absorption fine structure experiments and first-principles simulations

Authors: Iurii Timrov, Piyush Agrawal, Xinyu Zhang, Selma Erat, Ri** Liu, Artur Braun, Matteo Cococcioni, Matteo Calandra, Nicola Marzari, Daniele Passerone

Abstract: We present a joint theoretical and experimental study of the oxygen $K$-edge spectra for LaFeO$_3$ and homovalent Ni-substituted LaFeO$_3$ (LaFe$_{0.75}$Ni$_{0.25}$O$_3$), using first-principles simulations based on density-functional theory with extended Hubbard functionals and x-ray absorption near edge structure (XANES) measurements. Ground-state and excited-state XANES calculations employ Hubb… ▽ More We present a joint theoretical and experimental study of the oxygen $K$-edge spectra for LaFeO$_3$ and homovalent Ni-substituted LaFeO$_3$ (LaFe$_{0.75}$Ni$_{0.25}$O$_3$), using first-principles simulations based on density-functional theory with extended Hubbard functionals and x-ray absorption near edge structure (XANES) measurements. Ground-state and excited-state XANES calculations employ Hubbard on-site $U$ and inter-site $V$ parameters determined from first principles and the Lanczos recursive method to obtain absorption cross sections, which allows for a reliable description of XANES spectra in transition-metal compounds in a very broad energy range, with an accuracy comparable to that of hybrid functionals but at a substantially lower cost. We show that standard gradient-corrected exchange-correlation functionals fail in capturing accurately the electronic properties of both materials. In particular, for LaFe$_{0.75}$Ni$_{0.25}$O$_3$ they do not reproduce its semiconducting behaviour and provide a poor description of the pre-edge features at the O $K$ edge. The inclusion of Hubbard interactions leads to a drastic improvement, accounting for the semiconducting ground state of LaFe$_{0.75}$Ni$_{0.25}$O$_3$ and for a good agreement between calculated and measured XANES spectra. We show that the partial substitution of Fe for Ni affects the conduction-band bottom by generating a strongly hybridized O($2p$)-Ni($3d$) minority-spin empty electronic state. The present work, based on a consistent correction of self-interaction errors, outlines the crucial role of extended Hubbard functionals to describe the electronic structure of complex transition-metal oxides such as LaFeO$_3$ and LaFe$_{0.75}$Ni$_{0.25}$O$_3$ and paves the way to future studies on similar systems. △ Less

Submitted 24 August, 2020; v1 submitted 8 April, 2020; originally announced April 2020.

Journal ref: Phys. Rev. Research 2, 033265 (2020)

LDA+Usc calculations of phase relations in FeO

Authors: Yang Sun, Matteo Cococcioni, Renata M. Wentzcovitch

Abstract: Using the LDA+$\textit{U}_\text{sc}$ method, we present calculations phase relations of iron monoxides involving five polytypes in multiple spin-state configurations. The Hubbard parameter $U$ is determined self-consistently simultaneously with the occupation matrix and structures at arbitrary pressures. The Hubbard parameter strongly depends on pressure, structure, and spin state. Comparison with… ▽ More Using the LDA+$\textit{U}_\text{sc}$ method, we present calculations phase relations of iron monoxides involving five polytypes in multiple spin-state configurations. The Hubbard parameter $U$ is determined self-consistently simultaneously with the occupation matrix and structures at arbitrary pressures. The Hubbard parameter strongly depends on pressure, structure, and spin state. Comparison with experimental structural data indicates the LDA+$\textit{U}_\text{sc}$ can predict structure, compression curves, phase relations, and transition pressures very well for the insulating B1 and iB8 states. However, it requires additional calculations using the Mermin functional that includes the electronic entropic contribution to the free energy to obtain an nB8 metallic state and a consistent iB8 to nB8 insulator-to-metal transition pressure. △ Less

Submitted 23 May, 2020; v1 submitted 30 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Materials 4, 063605 (2020)

Self-consistent DFT+$U$+$V$ study of oxygen vacancies in SrTiO$_3$

Authors: Chiara Ricca, Iurii Timrov, Matteo Cococcioni, Nicola Marzari, Ulrich Aschauer

Abstract: Contradictory theoretical results for oxygen vacancies in SrTiO$_3$ (STO) were often related to the peculiar properties of STO, which is a $d^0$ transition metal oxide with mixed ionic-covalent bonding. Here, we apply, for the first time, density functional theory (DFT) within the extended Hubbard DFT+$U$+$V$ approach, including on-site as well as inter-site electronic interactions, to study oxyge… ▽ More Contradictory theoretical results for oxygen vacancies in SrTiO$_3$ (STO) were often related to the peculiar properties of STO, which is a $d^0$ transition metal oxide with mixed ionic-covalent bonding. Here, we apply, for the first time, density functional theory (DFT) within the extended Hubbard DFT+$U$+$V$ approach, including on-site as well as inter-site electronic interactions, to study oxygen-deficient STO with Hubbard $U$ and $V$ parameters computed self-consistently via density-functional perturbation theory. Our results demonstrate that the extended Hubbard functional is a promising approach to study defects in materials with electronic properties similar to STO. Indeed, DFT+$U$+$V$ provides a better description of stoichiometric STO compared to standard DFT or DFT+$U$, the band gap and crystal field splitting being in good agreement with experiments. In turn, also the description of the electronic properties of oxygen vacancies in STO is improved, with formation energies in excellent agreement with experiments as well as results obtained with the most frequently used hybrid functionals, however at a fraction of the computational cost. While our results do not fully resolve the contradictory findings reported in literature, our systematic approach leads to a deeper understanding of their origin, which stems from different cell sizes, STO phases, the exchange-correlation functional, and the treatment of structural relaxations and spin-polarization. △ Less

Submitted 23 January, 2020; v1 submitted 17 January, 2020; originally announced January 2020.

Comments: 15 pages (+11 SI), 13 figures (+6 SI)

Journal ref: Phys. Rev. Research 2, 023313 (2020)

Hubbard-corrected density functional perturbation theory with ultrasoft pseudopotentials

Authors: Andrea Floris, Iurii Timrov, Burak Himmetoglu, Nicola Marzari, Stefano de Gironcoli, Matteo Cococcioni

Abstract: We present in full detail a newly developed formalism enabling density functional perturbation theory (DFPT) calculations from a DFT+$U$ ground state. The implementation includes ultrasoft pseudopotentials and is valid for both insulating and metallic systems. It aims at fully exploiting the versatility of DFPT combined with the low-cost DFT+$U$ functional. This allows to avoid computationally int… ▽ More We present in full detail a newly developed formalism enabling density functional perturbation theory (DFPT) calculations from a DFT+$U$ ground state. The implementation includes ultrasoft pseudopotentials and is valid for both insulating and metallic systems. It aims at fully exploiting the versatility of DFPT combined with the low-cost DFT+$U$ functional. This allows to avoid computationally intensive frozen-phonon calculations when DFT+$U$ is used to eliminate the residual electronic self-interaction from approximate functionals and to capture the localization of valence electrons e.g. on $d$ or $f$ states. In this way, the effects of electronic localization (possibly due to correlations) are consistently taken into account in the calculation of specific phonon modes, Born effective charges, dielectric tensors and in quantities requiring well converged sums over many phonon frequencies, as phonon density of states and free energies. The new computational tool is applied to two representative systems, namely CoO, a prototypical transition metal monoxide and LiCoO$_2$, a material employed for the cathode of Li-ion batteries. The results show the effectiveness of our formalism to capture in a quantitatively reliable way the vibrational properties of systems with localized valence electrons. △ Less

Submitted 20 February, 2020; v1 submitted 14 October, 2019; originally announced October 2019.

Comments: 18 pages, 3 figures (Supplemental Material: 4 pages, 6 figures)

Journal ref: Phys. Rev. B 101, 064305 (2020)

Self-consistent site-dependent DFT+$U$ study of stoichiometric and defective SrMnO$_3$

Authors: Chiara Ricca, Iurii Timrov, Matteo Cococcioni, Nicola Marzari, Ulrich Aschauer

Abstract: We propose a self-consistent site-dependent Hubbard $U$ approach for DFT+$U$ calculations of defects in complex transition-metal oxides, using Hubbard parameters computed via linear-response theory. The formation of a defect locally perturbs the chemical environment of Hubbard sites in its vicinity, resulting in different Hubbard $U$ parameters for different sites. Using oxygen vacancies in SrMnO… ▽ More We propose a self-consistent site-dependent Hubbard $U$ approach for DFT+$U$ calculations of defects in complex transition-metal oxides, using Hubbard parameters computed via linear-response theory. The formation of a defect locally perturbs the chemical environment of Hubbard sites in its vicinity, resulting in different Hubbard $U$ parameters for different sites. Using oxygen vacancies in SrMnO$_3$ as a model system, we investigate the dependence of $U$ on the chemical environment and study its influence on the structural, electronic, and magnetic properties of defective bulk and strained thin-film structures. Our results show that a self-consistent $U$ improves the description of stoichiometric bulk SrMnO$_3$ with respect to GGA or GGA+$U$ calculations using an empirical $U$. For defective systems, $U$ changes as a function of the distance of the Hubbard site from the defect, its oxidation state and the magnetic phase of the bulk structure. Taking into account this dependence, in turn, affects the computed defect formation energies and the predicted strain- and/or defect-induced magnetic phase transitions, especially when occupied localized states appear in the band gap of the material upon defect creation. △ Less

Submitted 3 April, 2019; v1 submitted 27 November, 2018; originally announced November 2018.

Comments: 12 pages (+8 SI), 9 figures (+6 SI)

Journal ref: Phys. Rev. B 99, 094102 (2019)

Energetics and cathode voltages of LiMPO$_4$ olivines (M = Fe, Mn) from extended Hubbard functionals

Authors: Matteo Cococcioni, Nicola Marzari

Abstract: Transition-metal compounds pose serious challenges to first-principles calculations based on density-functional theory (DFT), due to the inability of most approximate exchange-correlation functionals to capture the localization of valence electrons on their $d$ states, essential for a predictive modeling of their properties. In this work we focus on two representatives of a well known family of ca… ▽ More Transition-metal compounds pose serious challenges to first-principles calculations based on density-functional theory (DFT), due to the inability of most approximate exchange-correlation functionals to capture the localization of valence electrons on their $d$ states, essential for a predictive modeling of their properties. In this work we focus on two representatives of a well known family of cathode materials for Li-ion batteries, namely the orthorhombic LiMPO$_4$ olivines (M = Fe, Mn). We show that extended Hubbard functionals with on-site ($U$) and inter-site ($V$) interactions (so called DFT+U+V) can predict the electronic structure of the mixed-valence phases, the formation energy of the materials with intermediate Li contents, and the overall average voltage of the battery with remarkable accuracy. We find, in particular, that the inclusion of inter-site interactions in the corrective Hamiltonian improves considerably the prediction of thermodynamic quantities when electronic localization occurs in the presence of significant interatomic hybridization (as is the case for the Mn compound), and that the self-consistent evaluation of the effective interaction parameters as material- and ground-state-dependent quantities allows the prediction of energy differences between different phases and concentrations. △ Less

Submitted 26 February, 2019; v1 submitted 15 November, 2018; originally announced November 2018.

Journal ref: Phys. Rev. Materials 3, 033801 (2019)

Numerical Asymptotic Results in Game Theory Using Sergeyev's Infinity Computing

Authors: Lorenzo Fiaschi, Marco Cococcioni

Abstract: Prisoner's Dilemma (PD) is a widely studied game that plays an important role in Game Theory. This paper aims at extending PD Tournaments to the case of infinite, finite or infinitesimal payoffs using Sergeyev's Infinity Computing (IC). By exploiting IC, we are able to show the limits of the classical approach to PD Tournaments analysis of the classical theory, extending both the sets of the feasi… ▽ More Prisoner's Dilemma (PD) is a widely studied game that plays an important role in Game Theory. This paper aims at extending PD Tournaments to the case of infinite, finite or infinitesimal payoffs using Sergeyev's Infinity Computing (IC). By exploiting IC, we are able to show the limits of the classical approach to PD Tournaments analysis of the classical theory, extending both the sets of the feasible and numerically computable tournaments. In particular we provide a numerical computation of the exact outcome of a simple PD Tournament where one player meets every other an infinite number of times, for both its deterministic and stochastic formulations. △ Less

Submitted 16 February, 2020; v1 submitted 2 August, 2018; originally announced August 2018.

Report number: Vol. 14, Issue 1

Journal ref: International Journal of Unconventional Computing, 2018

Hubbard parameters from density-functional perturbation theory

Authors: Iurii Timrov, Nicola Marzari, Matteo Cococcioni

Abstract: We present a transparent and computationally efficient approach for the first-principles calculation of Hubbard parameters from linear-response theory. This approach is based on density-functional perturbation theory and the use of monochromatic perturbations. In addition to delivering much improved efficiency, the present approach makes it straightforward to calculate automatically these Hubbard… ▽ More We present a transparent and computationally efficient approach for the first-principles calculation of Hubbard parameters from linear-response theory. This approach is based on density-functional perturbation theory and the use of monochromatic perturbations. In addition to delivering much improved efficiency, the present approach makes it straightforward to calculate automatically these Hubbard parameters for any given system, with tight numerical control on convergence and precision. The effectiveness of the method is showcased in three case studies - Cu$_2$O, NiO, and LiCoO$_2$ - and by the direct comparison with finite differences in supercell calculations. △ Less

Submitted 16 August, 2018; v1 submitted 4 May, 2018; originally announced May 2018.

Comments: 17 pages, 6 figures

Journal ref: Phys. Rev. B 98, 085127 (2018)

Advanced capabilities for materials modelling with Quantum ESPRESSO

Authors: P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. Buongiorno Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, N. Colonna, I. Carnimeo, A. Dal Corso, S. de Gironcoli, P. Delugas, R. A. DiStasio Jr., A. Ferretti, A. Floris, G. Fratesi, G. Fugallo, R. Gebauer, U. Gerstmann, F. Giustino, T. Gorni, J. Jia , et al. (25 additional authors not shown)

Abstract: Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wi… ▽ More Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wide variety of properties and processes it allows to simulate, to its performance on an increasingly broad array of hardware architectures, and to a community of researchers that rely on its capabilities as a core open-source development platform to implement theirs ideas. In this paper we describe recent extensions and improvements, covering new methodologies and property calculators, improved parallelization, code modularization, and extended interoperability both within the distribution and with external software. △ Less

Submitted 28 September, 2017; originally announced September 2017.

Comments: Psi-k highlight September 2017: psi-k.net/dowlnload/highlights/Highlight_137.pdf; J. Phys.: Condens. Matter, accepted

Journal ref: J. Phys.: Condens. Matter 29, 465901 (2017)

Thermoelasticity of Fe$^{3+}$- and Al-bearing bridgmanite

Authors: Gaurav Shukla, Matteo Cococcioni, Renata M. Wentzcovitch

Abstract: We report \textit{ab initio} (LDA + U$_{sc}$) calculations of thermoelastic properties of ferric iron (Fe$^{3+}$)- and aluminum (Al)-bearing bridgmanite (MgSiO$_3$ perovskite), the main Earth forming phase, at relevant pressure and temperature conditions and compositions. Three coupled substitutions, namely, [Al]$_{Mg}$-[Al]$_{Si}$, [Fe$^{3+}$]$_{Mg}$-[Fe$^{3+}$]$_{Si}$, and [Fe$^{3+}$]$_{Mg}$-[Al… ▽ More We report \textit{ab initio} (LDA + U$_{sc}$) calculations of thermoelastic properties of ferric iron (Fe$^{3+}$)- and aluminum (Al)-bearing bridgmanite (MgSiO$_3$ perovskite), the main Earth forming phase, at relevant pressure and temperature conditions and compositions. Three coupled substitutions, namely, [Al]$_{Mg}$-[Al]$_{Si}$, [Fe$^{3+}$]$_{Mg}$-[Fe$^{3+}$]$_{Si}$, and [Fe$^{3+}$]$_{Mg}$-[Al]$_{Si}$ have been investigated. Aggregate elastic moduli and sound velocities are successfully compared with limited experimental data available. In the case of the [Fe$^{3+}$]$_{Mg}$-[Fe$^{3+}$]$_{Si}$ substitution, the high-spin (S=5/2) to low-spin (S=1/2) crossover in [Fe$^{3+}$]$_{Si}$ induces a volume collapse and elastic anomalies across the transition region. However, the associated anomalies should disappear in the presence of aluminum in the most favorable substitution, i.e., [Fe$^{3+}$]$_{Mg}$-[Al]$_{Si}$. Calculated elastic properties along a lower mantle model geotherm suggest that the elastic behavior of bridgmanite with simultaneous substitution of Fe$_{2}$O$_3$ and Al$_{2}$O$_3$ in equal proportions or with Al$_{2}$O$_3$ in excess should be similar to that of (Mg,Fe$^{2+}$)SiO$_3$ bridgmanite. Excess Fe$_{2}$O$_3$ should produce elastic anomalies though. △ Less

Submitted 29 March, 2016; originally announced March 2016.

Comments: Under review with Geophysical Research Letters

Thermoelasticity of Fe2+-bearing bridgmanite

Authors: Gaurav Shukla, Zhongqing Wu, Han Hsu, Andrea Floris, Matteo Cococcioni, Renata M. Wentzcovitch

Abstract: We present LDA+U calculations of high temperature elastic properties of bridgmanite with composition (Mg$_{(1-x)}$Fe$_{x}^{2+}$)SiO$_3$ for $0\le{x}\le0.125$. Results of elastic moduli and acoustic velocities for the Mg-end member (x=0) agree very well with the latest high pressure and high temperature experimental measurements. In the iron-bearing system, we focus particularly on the change in th… ▽ More We present LDA+U calculations of high temperature elastic properties of bridgmanite with composition (Mg$_{(1-x)}$Fe$_{x}^{2+}$)SiO$_3$ for $0\le{x}\le0.125$. Results of elastic moduli and acoustic velocities for the Mg-end member (x=0) agree very well with the latest high pressure and high temperature experimental measurements. In the iron-bearing system, we focus particularly on the change in thermoelastic parameters across the state change that occurs in ferrous iron above $\sim$30 GPa, often attributed to a high-spin (HS) to intermediate spin (IS) crossover but explained by first principles calculations as a lateral displacement of substitutional iron in the perovskite cage. We show that the measured effect of this change on the equation of state of this system can be explained by the lateral displacement of substitutional iron, not by the HS to IS crossover. The calculated elastic properties of (Mg$_{0.875}$Fe$_{0.125}^{2+}$)SiO$_3$ along an adiabatic mantle geotherm, somewhat overestimate longitudinal velocities but produce densities and shear velocities quite consistent with Preliminary Reference Earth Model data throughout most of the lower mantle. △ Less

Submitted 19 March, 2015; originally announced March 2015.

Comments: Accepted for Geophysical Research Letters (DOI: 10.1002/2014GL062888)

Searching for high magnetization density in bulk Fe: the new metastable Fe$_6$ phase

Authors: Koichiro Umemoto, Burak Himmetoglu, Jian-** Wang, Renata M. Wentzcovitch, Matteo Cococcioni

Abstract: We report the discovery of a new allotrope of iron by first principles calculations. This phase has $Pmn2_1$ symmetry, a six-atom unit cell (hence the name Fe$_6$), and the highest magnetization density (M$_s$) among all known crystalline phases of iron. Obtained from the structural optimizations of the Fe$_3$C-cementite crystal upon carbon removal, $Pmn2_1$ Fe$_6$ is shown to result from the stab… ▽ More We report the discovery of a new allotrope of iron by first principles calculations. This phase has $Pmn2_1$ symmetry, a six-atom unit cell (hence the name Fe$_6$), and the highest magnetization density (M$_s$) among all known crystalline phases of iron. Obtained from the structural optimizations of the Fe$_3$C-cementite crystal upon carbon removal, $Pmn2_1$ Fe$_6$ is shown to result from the stabilization of a ferromagnetic FCC phase, further strained along the Bain path. Although metastable from 0 to 50 GPa, the new phase is more stable, at low pressures, than the other well-known HCP and FCC allotropes and smoothly transforms into the FCC phase under compression. If stabilized to room temperature, e.g., by interstitial impurities, Fe$_{6}$ could become the basis material for high M$_s$ rare-earth-free permanent magnets and high-impact applications such as, light-weight electric engine rotors or high-density recording media. The new phase could also be key to explain the enigmatic high M$_s$ of Fe$_{16}$N$_2$, which is currently attracting an intense research activity. △ Less

Submitted 21 October, 2014; originally announced October 2014.

Comments: 7 pages, 7 figures

Journal ref: Journal of Physics: Condensed Matter 27, 016001 (2014)

Hubbard-corrected DFT energy functionals: the LDA+U description of correlated systems

Authors: Burak Himmetoglu, Andrea Floris, Stefano de Gironcoli, Matteo Cococcioni

Abstract: The aim of this review article is to assess the descriptive capabilities of the Hubbard-rooted LDA+U method and to clarify the conditions under which it can be expected to be most predictive. The paper illustrates the theoretical foundation of LDA+U and prototypical applications to the study of correlated materials, discusses the most relevant approximations used in its formulation, and makes a co… ▽ More The aim of this review article is to assess the descriptive capabilities of the Hubbard-rooted LDA+U method and to clarify the conditions under which it can be expected to be most predictive. The paper illustrates the theoretical foundation of LDA+U and prototypical applications to the study of correlated materials, discusses the most relevant approximations used in its formulation, and makes a comparison with other approaches also developed for similar purposes. Open "issues" of the method are also discussed, including the calculation of the electronic couplings (the Hubbard U), the precise expression of the corrective functional and the possibility to use LDA+U for other classes of materials. The second part of the article presents recent extensions to the method and illustrates the significant improvements they have obtained in the description of several classes of different systems. The conclusive section finally discusses possible future developments of LDA+U to further enlarge its predictive power and its range of applicability. △ Less

Submitted 12 September, 2013; originally announced September 2013.

Comments: 45 pages, 14 figures, 4 tables International Journal of Quantum Chemistry (2013)

Donor and acceptor levels of organic photovoltaic compounds from first principles

Authors: Ismaila Dabo, Andrea Ferretti, Cheol-Hwan Park, Nicolas Poilvert, Yanli Li, Matteo Cococcioni, Nicola Marzari

Abstract: Accurate and efficient approaches to predict the optical properties of organic semiconducting compounds could accelerate the search for efficient organic photovoltaic materials. Nevertheless, predicting the optical properties of organic semiconductors has been plagued by the inaccuracy or computational cost of conventional first-principles calculations. In this work, we demonstrate that orbital-de… ▽ More Accurate and efficient approaches to predict the optical properties of organic semiconducting compounds could accelerate the search for efficient organic photovoltaic materials. Nevertheless, predicting the optical properties of organic semiconductors has been plagued by the inaccuracy or computational cost of conventional first-principles calculations. In this work, we demonstrate that orbital-dependent density-functional theory based upon Koopmans' condition [Phys. Rev. B 82, 115121 (2010)] is apt at describing donor and acceptor levels for a wide variety of organic molecules, clusters, and oligomers within a few tenths of an electron-volt relative to experiment, which is comparable to the predictive performance of many-body perturbation theory methods at a fraction of the computational cost. △ Less

Submitted 7 December, 2012; v1 submitted 30 October, 2012; originally announced October 2012.

Comments: 13 pages, 11 figures

Journal ref: Phys. Chem. Chem. Phys. 15, 685 (2013)

Role of electronic localization in the phosphorescence of iridium sensitizing dyes

Authors: Burak Himmetoglu, Alex Marchenko, Ismaila Dabo, Matteo Cococcioni

Abstract: In this work we present a systematic study of three representative iridium dyes, namely, Ir(ppy)3, FIrpic and PQIr, which are commonly used as sensitizers in organic optoelectronic devices. We show that electronic correlations play a crucial role in determining the excited-state energies in these systems, due to localization of electrons on Ir d orbitals. Electronic localization is captured by emp… ▽ More In this work we present a systematic study of three representative iridium dyes, namely, Ir(ppy)3, FIrpic and PQIr, which are commonly used as sensitizers in organic optoelectronic devices. We show that electronic correlations play a crucial role in determining the excited-state energies in these systems, due to localization of electrons on Ir d orbitals. Electronic localization is captured by employing hybrid functionals within time-dependent density-functional theory (TDDFT) and with Hubbard-model corrections within the delta-SCF approach. The performance of both methods are studied comparatively and shown to be in good agreement with experiment. The Hubbard-corrected functionals provide further insight into the localization of electrons and on the charge-transfer character of excited-states. The gained insight allows us to comment on envisioned functionalization strategies to improve the performance of these systems. Complementary discussions on the delta-SCF method are also presented in order to fill some of the gaps in the literature. △ Less

Submitted 17 September, 2012; originally announced September 2012.

Comments: 15 pages, 14 figures

Journal ref: J. Chem. Phys. 137, 154309 (2012)

Origin of magnetic interactions and their influence on the structural properties of Ni2MnGa and related compounds

Authors: Burak Himmetoglu, Vamshi M. Katukuri, Matteo Cococcioni

Abstract: In this work, we perform first principles DFT calculations to investigate the interplay between magnetic and structural properties in Ni2MnGa. We demonstrate that the relative stability of austenite (cubic) and non-modulated martensite (tetragonal) phases depends critically on the magnetic interactions between Mn atoms. While standard approximate DFT functionals stabilize the latter phase, a more… ▽ More In this work, we perform first principles DFT calculations to investigate the interplay between magnetic and structural properties in Ni2MnGa. We demonstrate that the relative stability of austenite (cubic) and non-modulated martensite (tetragonal) phases depends critically on the magnetic interactions between Mn atoms. While standard approximate DFT functionals stabilize the latter phase, a more accurate treatment of electronic localization and magnetism, obtained with DFT+U, suppresses the non-modulated tetragonal structure for the stoichiometric compound, in better agreement with the experiments. We show that the Anderson impurity model, with Mn atoms treated as magnetic impurities, can explain this observation and that the fine balance between super-exchange RKKY type interactions mediated by Ni d and Ga p orbitals determines the equilibrium structure of the crystal. The Anderson model is also demonstrated to capture the effect of the number of valence electrons per unit cell on the structural properties, often used as an empirical parameter to tune the behavior of Ni2MnGa based alloys. Finally, we show that off-stoichiometric compositions with excess Mn promote transitions to a non-modulated tetragonal structure, in agreement with experiments. △ Less

Submitted 7 March, 2012; originally announced March 2012.

Comments: 16 pages, 25 figures

Journal ref: J. Phys.: Condens. Matter 24, 185501, (2012)

First principles study of electronic and structural properties of CuO

Authors: Burak Himmetoglu, Renata M. Wentzcovitch, Matteo Cococcioni

Abstract: We investigate the electronic and structural properties of CuO, which shows significant deviations from the trends obeyed by other transition-metal monoxides. Using an extended Hubbard corrective functional, we uncover an orbitally ordered insulating ground state for the cubic phase of this material, which was expected but never found before. This insulating state results from a fine balance betwe… ▽ More We investigate the electronic and structural properties of CuO, which shows significant deviations from the trends obeyed by other transition-metal monoxides. Using an extended Hubbard corrective functional, we uncover an orbitally ordered insulating ground state for the cubic phase of this material, which was expected but never found before. This insulating state results from a fine balance between the tendency of Cu to complete its d-shell and Hund's rule magnetism. Starting from the ground state for the cubic phase, we also study tetragonal distortions of the unit cell (recently reported in experiments), the consequent electronic reorganizations and identify the equilibrium structure. Our calculations reveal an unexpected richness of possible magnetic and orbital orders, relatively close in energy to the ground state, whose stability depends on the sign and entity of distortion. △ Less

Submitted 21 July, 2011; originally announced July 2011.

Comments: 9 pages, 9 figures

Journal ref: Phys. Rev. B84, 115108 (2011)

Spin-state crossover and hyperfine interactions of ferric iron in MgSiO$_3$ perovskite

Authors: Han Hsu, Peter Blaha, Matteo Cococcioni, Renata M. Wentzcovitch

Abstract: Using density functional theory plus Hubbard $U$ calculations, we show that the ground state of (Mg,Fe)(Si,Fe)O$_3$ perovskite, a major mineral phase in the Earth's lower mantle, has high-spin ferric iron ($S=5/2$) at both the dodecahedral (A) and octahedral (B) site. As the pressure increases, the B-site iron undergoes a spin-state crossover to the low-spin state ($S=1/2$), while the A-site iron… ▽ More Using density functional theory plus Hubbard $U$ calculations, we show that the ground state of (Mg,Fe)(Si,Fe)O$_3$ perovskite, a major mineral phase in the Earth's lower mantle, has high-spin ferric iron ($S=5/2$) at both the dodecahedral (A) and octahedral (B) site. As the pressure increases, the B-site iron undergoes a spin-state crossover to the low-spin state ($S=1/2$), while the A-site iron remains in the high-spin state. Our calculation shows that the B-site spin-state crossover in the pressure range of 40-70 GPa is accompanied by a noticeable volume reduction and an increase in quadrupole splitting, consistent with recent X-ray diffraction and Mössbauer spectroscopy measurements. The volume reduction leads to a significant softening in the bulk modulus, which suggests a possible source of seismic velocity anomalies in the lower mantle. △ Less

Submitted 1 February, 2011; v1 submitted 19 January, 2011; originally announced January 2011.

Comments: 11 pages, 4 figures, 1 table

Koopmans' condition for density-functional theory

Authors: Ismaila Dabo, Andrea Ferretti, Nicolas Poilvert, Yanli Li, Nicola Marzari, Matteo Cococcioni

Abstract: In approximate Kohn-Sham density-functional theory, self-interaction manifests itself as the dependence of the energy of an orbital on its fractional occupation. This unphysical behavior translates into qualitative and quantitative errors that pervade many fundamental aspects of density-functional predictions. Here, we first examine self-interaction in terms of the discrepancy between total and pa… ▽ More In approximate Kohn-Sham density-functional theory, self-interaction manifests itself as the dependence of the energy of an orbital on its fractional occupation. This unphysical behavior translates into qualitative and quantitative errors that pervade many fundamental aspects of density-functional predictions. Here, we first examine self-interaction in terms of the discrepancy between total and partial electron removal energies, and then highlight the importance of imposing the generalized Koopmans' condition -- that identifies orbital energies as opposite total electron removal energies -- to resolve this discrepancy. In the process, we derive a correction to approximate functionals that, in the frozen-orbital approximation, eliminates the unphysical occupation dependence of orbital energies up to the third order in the single-particle densities. This non-Koopmans correction brings physical meaning to single-particle energies; when applied to common local or semilocal density functionals it provides results that are in excellent agreement with experimental data -- with an accuracy comparable to that of GW many-body perturbation theory -- while providing an explicit total energy functional that preserves or improves on the description of established structural properties. △ Less

Submitted 23 August, 2010; v1 submitted 11 August, 2010; originally announced August 2010.

Comments: 18 pages, 13 figures, 4 tables

Journal ref: Phys. Rev. B 82, 115121 (2010)

Extended DFT+U+V method with on-site and inter-site electronic interactions

Authors: Vivaldo Leiria Campo Jr, Matteo Cococcioni

Abstract: In this article we introduce a generalization of the popular DFT+U method based on the extended Hubbard model that includes on-site and inter-site electronic interactions. The novel corrective Hamiltonian is designed to study systems for which electrons are not completely localized on atomic states (according to the general scheme of Mott localization) and hybridization between orbitals from dif… ▽ More In this article we introduce a generalization of the popular DFT+U method based on the extended Hubbard model that includes on-site and inter-site electronic interactions. The novel corrective Hamiltonian is designed to study systems for which electrons are not completely localized on atomic states (according to the general scheme of Mott localization) and hybridization between orbitals from different sites plays an important role. The application of the extended functional to archetypal Mott - charge-transfer (NiO) and covalently bonded insulators (Si and GaAs) demonstrates its accuracy and versatility and the possibility to obtain a unifying and equally accurate description for a broad range of very diverse systems. △ Less

Submitted 30 July, 2009; v1 submitted 30 July, 2009; originally announced July 2009.

Quantum ESPRESSO: a modular and open-source software project for quantum simulations of materials

Authors: P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, m. Cococcioni, I. Dabo, A. Dal Corso, S. Fabris, G. Fratesi, S. de Gironcoli, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello , et al. (8 additional authors not shown)

Abstract: Quantum ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). Quantum ESPRESSO stands for "opEn Source Package for Research in Electronic Structure, Simulation, and Optimization". It is freely available to rese… ▽ More Quantum ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). Quantum ESPRESSO stands for "opEn Source Package for Research in Electronic Structure, Simulation, and Optimization". It is freely available to researchers around the world under the terms of the GNU General Public License. Quantum ESPRESSO builds upon newly-restructured electronic-structure codes that have been developed and tested by some of the original authors of novel electronic-structure algorithms and applied in the last twenty years by some of the leading materials modeling groups worldwide. Innovation and efficiency are still its main focus, with special attention paid to massively-parallel architectures, and a great effort being devoted to user friendliness. Quantum ESPRESSO is evolving towards a distribution of independent and inter-operable codes in the spirit of an open-source project, where researchers active in the field of electronic-structure calculations are encouraged to participate in the project by contributing their own codes or by implementing their own ideas into existing codes. △ Less

Submitted 26 July, 2009; v1 submitted 14 June, 2009; originally announced June 2009.

Comments: 36 pages, 5 figures, resubmitted to J.Phys.: Condens. Matter

Journal ref: J. Phys.: Condens. Matter 21, 395502 (2009)

Non-Koopmans Corrections in Density-functional Theory: Self-interaction Revisited

Authors: I. Dabo, M. Cococcioni, N. Marzari

Abstract: In effective single-electron theories, self-interaction manifests itself through the unphysical dependence of the energy of an electronic state as a function of its occupation, which results in important deviations from the ideal Koopmans trend and strongly affects the accuracy of electronic-structure predictions. Here, we study the non-Koopmans behavior of local and semilocal density-functional… ▽ More In effective single-electron theories, self-interaction manifests itself through the unphysical dependence of the energy of an electronic state as a function of its occupation, which results in important deviations from the ideal Koopmans trend and strongly affects the accuracy of electronic-structure predictions. Here, we study the non-Koopmans behavior of local and semilocal density-functional theory (DFT) total energy methods as a means to quantify and to correct self-interaction errors. We introduce a non-Koopmans self-interaction correction that generalizes the Perdew-Zunger scheme, and demonstrate its considerably improved performance in correcting the deficiencies of DFT approximations for self-interaction problems of fundamental and practical relevance. △ Less

Submitted 18 January, 2009; originally announced January 2009.

Comments: 4 pages, 3 figures, 1 table

Simulation of Heme using DFT+U: a step toward accurate spin-state energetics

Authors: Damian A. Scherlis, Matteo Cococcioni, Patrick Sit, Nicola Marzari

Abstract: We investigate the DFT+U approach as a viable solution to describe the low-lying states of ligated and unligated iron heme complexes. Besides their central role in organometallic chemistry, these compounds represent a paradigmatic case where LDA, GGA, and common hybrid functionals fail to reproduce the experimental magnetic splittings. In particular, the imidazole pentacoordinated heme is incorr… ▽ More We investigate the DFT+U approach as a viable solution to describe the low-lying states of ligated and unligated iron heme complexes. Besides their central role in organometallic chemistry, these compounds represent a paradigmatic case where LDA, GGA, and common hybrid functionals fail to reproduce the experimental magnetic splittings. In particular, the imidazole pentacoordinated heme is incorrectly described as a triplet by all usual DFT flavors. In this study we show that a U parameter close to 4 eV leads to spin transitions and molecular geometries in quantitative agreement with experiments, and that DFT+U represents an appealing tool in the description of iron porphyrin complexes, at a much reduced cost compared to correlated quantum-chemistry methods. The possibility of obtaining the U parameter from first-principles is explored through a self-consistent linear-response formulation. We find that this approach, which proved to be successful in other iron systems, produces in this case some overestimation with respect to the optimal values of U. △ Less

Submitted 18 May, 2007; originally announced May 2007.

Comments: To be published in The Journal of Physical Chemistry B 30 pages, 15 figures

Structure and energetics of solvated ferrous and ferric ions: Car-Parrinello molecular dynamics in the DFT+U formalism

Authors: P. H. -L. Sit, Matteo Cococcioni, Nicola Marzari

Abstract: We implemented a rotationally-invariant Hubbard U extension to density-functional theory in the Car-Parrinello molecular dynamics framework, with the goal of bringing the accuracy of the DFT+U approach to finite-temperature simulations, especially for liquids or solids containing transition-metal ions. First, we studied the effects on the Hubbard U on the static equilibrium structure of the hexa… ▽ More We implemented a rotationally-invariant Hubbard U extension to density-functional theory in the Car-Parrinello molecular dynamics framework, with the goal of bringing the accuracy of the DFT+U approach to finite-temperature simulations, especially for liquids or solids containing transition-metal ions. First, we studied the effects on the Hubbard U on the static equilibrium structure of the hexa-aqua ferrous and ferric ions, and the inner-sphere reorganization energy for the electron-transfer reaction between aqueous ferrous and ferric ions. It is found that the reorganization energy is increased, mostly as a result of the Fe-O distance elongation in the hexa-aqua ferrous ion. Second, we performed a first-principles molecular dynamics study of the solvation structure of the two aqueous ferrous and ferric ions. The Hubbard term is found to change the Fe-O radial distribution function for the ferrous ion, while having a negligible effect on the aqueous ferric ion. Moreover, the frequencies of vibrations between Fe and oxygen atoms in the first-solvation shell are shown to be unaffected by the Hubbard corrections for both ferrous and ferric ions. △ Less

Submitted 11 January, 2007; originally announced January 2007.

Comments: 13 pages, 2 figures, 1 table. Submitted to Journal of Electroanalytical Chemistry

Density functional theory in transition-metal chemistry: a self-consistent Hubbard U approach

Authors: Heather J. Kulik, Matteo Cococcioni, Damian A. Scherlis, Nicola Marzari

Abstract: Transition-metal centers are the active sites for many biological and inorganic chemical reactions. Notwithstanding this central importance, density-functional theory calculations based on generalized-gradient approximations often fail to describe energetics, multiplet structures, reaction barriers, and geometries around the active sites. We suggest here an alternative approach, derived from the… ▽ More Transition-metal centers are the active sites for many biological and inorganic chemical reactions. Notwithstanding this central importance, density-functional theory calculations based on generalized-gradient approximations often fail to describe energetics, multiplet structures, reaction barriers, and geometries around the active sites. We suggest here an alternative approach, derived from the Hubbard U correction to solid-state problems, that provides an excellent agreement with correlated-electron quantum chemistry calculations in test cases that range from the ground state of Fe$_2$ and Fe$_2^-$ to the addition-elimination of molecular hydrogen on FeO$^+$. The Hubbard U is determined with a novel self-consistent procedure based on a linear-response approach. △ Less

Submitted 12 August, 2006; originally announced August 2006.

Comments: 5 pages, 3 figures, Phys. Rev. Lett., in press

Realistic, quantitative descriptions of electron-transfer reactions: diabatic free-energy surfaces from first-principles molecular dynamics

Authors: P. H. -L. Sit, Matteo Cococcioni, Nicola Marzari

Abstract: A general approach to calculate the diabatic surfaces for electron-transfer reactions is presented, based on first-principles molecular dynamics of the active centers and their surrounding medium. The excitation energy corresponding to the transfer of an electron at any given ionic configuration (the Marcus energy gap) is accurately assessed within ground-state density-functional theory via a no… ▽ More A general approach to calculate the diabatic surfaces for electron-transfer reactions is presented, based on first-principles molecular dynamics of the active centers and their surrounding medium. The excitation energy corresponding to the transfer of an electron at any given ionic configuration (the Marcus energy gap) is accurately assessed within ground-state density-functional theory via a novel penalty functional for oxidation-reduction reactions that appropriately acts on the electronic degrees of freedom alone. The self-interaction error intrinsic to common exchange-correlation functionals is also corrected by the same penalty functional. The diabatic free-energy surfaces are then constructed from umbrella sampling on large ensembles of configurations. As a paradigmatic case study, the self-exchange reaction between ferrous and ferric ions in water is studied in detail. △ Less

Submitted 13 June, 2006; originally announced June 2006.

Comments: 5 pages, 4 figures, accepted for publication in Phys. Rev. Lett

A unified electrostatic and cavitation model for first-principles molecular dynamics in solution

Authors: Damian A. Scherlis, Jean-Luc Fattebert, Francois Gygi, Matteo Cococcioni, Nicola Marzari

Abstract: The electrostatic continuum solvent model developed by Fattebert and Gygi is combined with a first-principles formulation of the cavitation energy based on a natural quantum-mechanical definition for the surface of a solute. Despite its simplicity, the cavitation contribution calculated by this approach is found to be in remarkable agreement with that obtained by more complex algorithms relying… ▽ More The electrostatic continuum solvent model developed by Fattebert and Gygi is combined with a first-principles formulation of the cavitation energy based on a natural quantum-mechanical definition for the surface of a solute. Despite its simplicity, the cavitation contribution calculated by this approach is found to be in remarkable agreement with that obtained by more complex algorithms relying on a large set of parameters. Our model allows for very efficient Car-Parrinello simulations of finite or extended systems in solution, and demonstrates a level of accuracy as good as that of established quantum-chemistry continuum solvent methods. We apply this approach to the study of tetracyanoethylene dimers in dichloromethane, providing valuable structural and dynamical insights on the dimerization phenomenon. △ Less

Submitted 6 October, 2005; originally announced October 2005.

The Li intercalation potential of LiMPO4 and LiMSiO4 olivines with M = Fe, Mn, Co, Ni

Authors: Fei Zhou, Matteo Cococcioni, Kisuk Kang, Gerbrand Ceder

Abstract: The Li intercalation potential of LiMPO4 and LiMSiO4 compounds with M = Fe, Mn, Co, and Ni is computed with the GGA+U method. It is found that this approach is considerably more accurate than standard LDA or GGA methods. The calculated potentials for LiFePO4, LiMnPO4 and LiCoOPO4 agree to within 0.1 V with experimental results. The LiNiPO4 potential is predicted to be above 5 V. The potentials o… ▽ More The Li intercalation potential of LiMPO4 and LiMSiO4 compounds with M = Fe, Mn, Co, and Ni is computed with the GGA+U method. It is found that this approach is considerably more accurate than standard LDA or GGA methods. The calculated potentials for LiFePO4, LiMnPO4 and LiCoOPO4 agree to within 0.1 V with experimental results. The LiNiPO4 potential is predicted to be above 5 V. The potentials of the silicate materials are all found to be rather high, but LiFeSiO4 and LiCoSiO4 have negligible volume change upon Li extraction. △ Less

Submitted 5 June, 2005; originally announced June 2005.

Comments: 10 pages, 2 figures

Journal ref: Electrochemistry Communications 6 (11): 1144-1148 Nov 2004

Electronic-enthalpy functional for finite systems under pressure

Authors: Matteo Cococcioni, Francesco Mauri, Gerbrand Ceder, Nicola Marzari

Abstract: We introduce the notion of electronic enthalpy for first-principles structural and dynamical calculations of finite systems under pressure. An external pressure field is allowed to act directly on the electronic structure of the system studied via the ground-state minimization of the functional $E+PV_{q}$, where $V_{q}$ is the quantum volume enclosed by a charge isosurface. The Hellmann-Feynman… ▽ More We introduce the notion of electronic enthalpy for first-principles structural and dynamical calculations of finite systems under pressure. An external pressure field is allowed to act directly on the electronic structure of the system studied via the ground-state minimization of the functional $E+PV_{q}$, where $V_{q}$ is the quantum volume enclosed by a charge isosurface. The Hellmann-Feynman theorem applies, and assures that the ionic equations of motion follow an isoenthalpic dynamics. No pressurizing medium is explicitly required, while coatings of environmental ions or ligands can be introduced if chemically relevant. We apply this novel approach to the study of group-IV nanoparticles during a shock wave, highlighting the significant differences inthe plastic or elastic response of the diamond cage under load, and their potential use as novel nanostructured impact-absorbing materials. △ Less

Submitted 19 April, 2005; originally announced April 2005.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 94, 145501 (2005)

First-principles prediction of redox potentials in transition-metal compounds with LDA+U

Authors: Fei Zhou, Matteo Cococcioni, Chris A. Marianetti, Dane Morgan, G. Ceder

Abstract: First-principles calculations within the Local Density Approximation (LDA) or Generalized Gradient Approximation (GGA), though very successful, are known to underestimate redox potentials, such as those at which lithium intercalates in transition metal compounds. We argue that this inaccuracy is related to the lack of cancellation of electron self-interaction errors in LDA/GGA and can be improve… ▽ More First-principles calculations within the Local Density Approximation (LDA) or Generalized Gradient Approximation (GGA), though very successful, are known to underestimate redox potentials, such as those at which lithium intercalates in transition metal compounds. We argue that this inaccuracy is related to the lack of cancellation of electron self-interaction errors in LDA/GGA and can be improved by using the DFT+$U$ method with a self-consistent evaluation of the $U$ parameter. We show that, using this approach, the experimental lithium intercalation voltages of a number of transition metal compounds, including the olivine Li$_{x}$MPO$_{4}$ (M=Mn, Fe Co, Ni), layered Li$_{x}$MO$_{2}$ ($x=$Co, Ni) and spinel-like Li$_{x}$M$_{2}$O$_{4}$ (M=Mn, Co), can be reproduced accurately. △ Less

Submitted 5 June, 2005; v1 submitted 16 June, 2004; originally announced June 2004.

Comments: 19 pages, 6 figures, Phys. Rev. B 70, 235121 (2004)

Journal ref: Phys. Rev. B 70, 235121 (2004)

A linear response approach to the calculation of the effective interaction parameters in the LDA+U method

Authors: Matteo Cococcioni, Stefano de Gironcoli

Abstract: In this work we reexamine the LDA+U method of Anisimov and coworkers in the framework of a plane-wave pseudopotential approach. A simplified rotational-invariant formulation is adopted. The calculation of the Hubbard U entering the expression of the functional is discussed and a linear response approach is proposed that is internally consistent with the chosen definition for the occupation matri… ▽ More In this work we reexamine the LDA+U method of Anisimov and coworkers in the framework of a plane-wave pseudopotential approach. A simplified rotational-invariant formulation is adopted. The calculation of the Hubbard U entering the expression of the functional is discussed and a linear response approach is proposed that is internally consistent with the chosen definition for the occupation matrix of the relevant localized orbitals. In this way we obtain a scheme whose functionality should not depend strongly on the particular implementation of the model in ab-initio calculations. We demonstrate the accuracy of the method, computing structural and electronic properties of a few systems including transition and rare-earth correlated metals, transition metal monoxides and iron-silicate. △ Less

Submitted 7 May, 2004; originally announced May 2004.

Comments: 18 pages, 18 figures, 3 tables

Phase Separation in Li$_x$FePO$_4$ Induced by Correlation Effects

Authors: F. Zhou, C. A. Marianetti, M. Cococcioni, D. Morgan, G. Ceder

Abstract: We report on a significant failure of LDA and GGA to reproduce the phase stability and thermodynamics of mixed-valence Li$_x$FePO$_4$ compounds. Experimentally, Li$_x$FePO$_4$ compositions ($0 \leq x \leq 1$) are known to be unstable and phase separate into Li FePO$_4$ and FePO$_4$. However, first-principles calculations with LDA/GGA yield energetically favorable intermediate compounds an d henc… ▽ More We report on a significant failure of LDA and GGA to reproduce the phase stability and thermodynamics of mixed-valence Li$_x$FePO$_4$ compounds. Experimentally, Li$_x$FePO$_4$ compositions ($0 \leq x \leq 1$) are known to be unstable and phase separate into Li FePO$_4$ and FePO$_4$. However, first-principles calculations with LDA/GGA yield energetically favorable intermediate compounds an d hence no phase separation. This qualitative failure of LDA/GGA seems to have its origin in the LDA/GGA self-interaction which de localizes charge over the mixed-valence Fe ions, and is corrected by explicitly considering correlation effects in this material. This is demonstrated with LDA+U calculations which correctly predict phase separation in Li$_x$FePO$_4$ for $U-J \gtrsim 3.5$eV. T he origin of the destabilization of intermediate compounds is identified as electron localization and charge ordering at different iron sites. Introduction of correlation also yields more accurate electrochemical reaction energies between FePO$_4$/Li$_x$FePO$_ 4$ and Li/Li$^+$ electrodes. △ Less

Submitted 13 May, 2004; v1 submitted 27 April, 2004; originally announced April 2004.

Comments: 12 pages, 5 figures, Phys. Rev. B 201101R, 2004

A non-perturbative treatment of the generalized Su-Schreiffer-Heeger Hamiltonian on a dimer

Authors: M. Cococcioni, M. Acquarone

Abstract: Starting from the Hamiltonian for a dimer which includes all the electronic and electron-phonon terms consistent with a non-degenerate orbital, by a sequence of displacement and squeezing transformation we obtain an effective polaronic Hamiltonian. The renormalized electronic interactions differ from the results of semiclassical or perturbative treatments. The properties of the variationally det… ▽ More Starting from the Hamiltonian for a dimer which includes all the electronic and electron-phonon terms consistent with a non-degenerate orbital, by a sequence of displacement and squeezing transformation we obtain an effective polaronic Hamiltonian. The renormalized electronic interactions differ from the results of semiclassical or perturbative treatments. The properties of the variationally determined ground state of two particles in the orbital are discussed for variable dimer length in the adiabatic limit. △ Less

Submitted 11 October, 2000; originally announced October 2000.

Comments: 6 pages, 3 figures, to be published in Int. Journal of Modern Physics B