Showing 1–8 of 8 results for author: Clarke, D R

Optical Absorption Effects in Thermal Radiation Barrier Coating Materials

Authors: Georgios Koutsakis, David R. Clarke

Abstract: Future gas turbine engines will operate at higher gas temperatures and consequentially hot-section components such as blades, vanes and combustors, will be subject to higher thermal radiation fluxes than today. Current thermal barrier coating materials are translucent over the spectral region of the heat flux so future coatings will also have to provide a barrier to thermal radiation. The effects… ▽ More Future gas turbine engines will operate at higher gas temperatures and consequentially hot-section components such as blades, vanes and combustors, will be subject to higher thermal radiation fluxes than today. Current thermal barrier coating materials are translucent over the spectral region of the heat flux so future coatings will also have to provide a barrier to thermal radiation. The effects of optical absorption and scattering properties of coating materials on the temperatures and heat fluxes through coatings are explored using a two-flux heat transfer model, and promising combinations are identified that reduce the coating-alloy interface temperatures. Lower interface temperatures occur for thickness normalized absorptions of $\overlineκ L$ $>$1. The effect of both a narrow and a broad band spectrally selective absorbing Gd${_2}$Zr${_2}$O$_{7}$ based coating materials are then studied. These show that large values of the product of the normalized absorption length and the spectral width of the absorption are required to significantly decrease the radiative heat transport through a coating. The results emphasize the importance of enhancing the optical absorption of the next generation barrier materials as a strategy to increase gas turbine engine efficiency by decreasing compressor bleed air cooling requirements. △ Less

Submitted 22 November, 2023; originally announced November 2023.

An experimental approach to map** chemical bonds in nanostructured materials

Authors: Philip N. H. Nakashima, Ding Peng, Xiaofen Tan, Anna N. Mortazavi, Tianyu Liu, Joanne Etheridge, Laure Bourgeois, David R. Clarke

Abstract: We introduce a number of techniques in quantitative convergent-beam electron diffraction under development by our group and discuss the basis for measuring interatomic electrostatic potentials (and therefore also electron densities), localised at sub-nanometre scales, with sufficient accuracy and precision to map chemical bonds in and around nanostructures in nanostructured materials. This has nev… ▽ More We introduce a number of techniques in quantitative convergent-beam electron diffraction under development by our group and discuss the basis for measuring interatomic electrostatic potentials (and therefore also electron densities), localised at sub-nanometre scales, with sufficient accuracy and precision to map chemical bonds in and around nanostructures in nanostructured materials. This has never been possible as experimental measurements of bonding have always been restricted to homogeneous single-phased crystals. △ Less

Submitted 22 December, 2021; originally announced December 2021.

Comments: 11 pages, 4 figures

Reconfigurable Shape-Morphing Dielectric Elastomers Using Spatially Varying Electric Fields

Authors: Ehsan Hajiesmaili, David R. Clarke

Abstract: Exceptionally large strains can be produced in soft elastomers by the application of an electric field and the strains can be exploited for a variety of novel actuators, such as tunable lenses and tactile actuators. However, shape morphing with dielectric elastomers has not been possible since no generalizable method for changing their Gaussian curvature has been devised. It is shown that this fun… ▽ More Exceptionally large strains can be produced in soft elastomers by the application of an electric field and the strains can be exploited for a variety of novel actuators, such as tunable lenses and tactile actuators. However, shape morphing with dielectric elastomers has not been possible since no generalizable method for changing their Gaussian curvature has been devised. It is shown that this fundamental limitation can be lifted by introducing internal, spatially varying electric fields through a layer-by-layer fabrication method incorporating shaped, carbon-nanotubes-based electrodes between thin elastomer sheets. To illustrate the potential of the method, voltage-tunable negative and positive Gaussian curvatures shapes are produced. Furthermore, by applying voltages to different sets of internal electrodes, the shapes can be re-configured. All the shape changes are reversible when the voltage is removed. △ Less

Submitted 24 September, 2018; originally announced September 2018.

Single Layer In-O Atomic Sheets as Phonon and Electron and Barriers in ZnO-In2O3 Natural Superlattices: Implications for Thermoelectricity

Authors: Xin Liang, David Bell, David R. Clarke

Abstract: The phases in the ZnO half of the ZnO-In2O3 binary system are natural superlattices consisting of periodic stacking of single InO2 sheets separated by indium doped ZnO blocks with a spacing that depends on the composition according to the relationship In2O3(ZnO)k. Characterization by combined, atomic resolution, aberration-corrected scanning transmission electron microscopy (STEM) and electron ene… ▽ More The phases in the ZnO half of the ZnO-In2O3 binary system are natural superlattices consisting of periodic stacking of single InO2 sheets separated by indium doped ZnO blocks with a spacing that depends on the composition according to the relationship In2O3(ZnO)k. Characterization by combined, atomic resolution, aberration-corrected scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) analysis, indicates that the atomic structure of each InO2 layer consists of a single continuous sheet of octahedrally-coordinated InO2. The sheets also are crystallographic inversion boundaries. Analysis of the electrical conductivity, thermal conductivity and Seebeck coefficient data at 800 oC indicates that the InO2 sheets not only decrease thermal conductivity by phonon scattering but also create potential barriers to electron transport. The origin of the potential barriers, the role of piezoelectric effects and their dependence on superlattice spacing is discussed qualitatively. It is also argued that the crystallographically-aligned InO2 sheets within individual grains are also transport barriers in randomly oriented polycrystalline materials. △ Less

Submitted 18 December, 2017; originally announced December 2017.

Comments: 28 pages, 8 figures

Large Area Metalenses: Design, Characterization, and Mass Manufacturing

Authors: Alan She, Shuyan Zhang, Samuel Shian, David R. Clarke, Federico Capasso

Abstract: Optical components, such as lenses, have traditionally been made in the bulk form by sha** glass or other transparent materials. Recent advances in metasurfaces provide a new basis for recasting optical components into thin, planar elements, having similar or better performance using arrays of subwavelength-spaced optical phase-shifters. The technology required to mass produce them dates back to… ▽ More Optical components, such as lenses, have traditionally been made in the bulk form by sha** glass or other transparent materials. Recent advances in metasurfaces provide a new basis for recasting optical components into thin, planar elements, having similar or better performance using arrays of subwavelength-spaced optical phase-shifters. The technology required to mass produce them dates back to the mid-1990s, when the feature sizes of semiconductor manufacturing became considerably denser than the wavelength of light, advancing in stride with Moore's law. This provides the possibility of unifying two industries: semiconductor manufacturing and lens-making, whereby the same technology used to make computer chips is used to make optical components, such as lenses, based on metasurfaces. Using a scalable metasurface layout compression algorithm that exponentially reduces design file sizes (by 3 orders of magnitude for a centimeter diameter lens) and stepper photolithography, we show the design and fabrication of metasurface lenses (metalenses) with extremely large areas, up to centimeters in diameter and beyond. Using a single two-centimeter diameter near-infrared metalens less than a micron thick fabricated in this way, we experimentally implement the ideal thin lens equation, while demonstrating high-quality imaging and diffraction-limited focusing. △ Less

Submitted 20 November, 2017; originally announced November 2017.

Large Area Electrically Tunable Lenses Based on Metasurfaces and Dielectric Elastomer Actuators

Authors: Alan She, Shuyan Zhang, Samuel Shian, David R. Clarke, Federico Capasso

Abstract: Tunable optical devices, in particular, varifocal lenses, have important applications in various fields, including imaging and adaptive vision. Recent advances in metasurfaces, which control the wavefront of light using subwavelength-spaced nanostructures, open up new opportunities to replace bulk optical devices, with thin, flat, lightweight devices. We have demonstrated for the first time an ele… ▽ More Tunable optical devices, in particular, varifocal lenses, have important applications in various fields, including imaging and adaptive vision. Recent advances in metasurfaces, which control the wavefront of light using subwavelength-spaced nanostructures, open up new opportunities to replace bulk optical devices, with thin, flat, lightweight devices. We have demonstrated for the first time an electrically tunable flat lens, based on large area metasurfaces combined with a dielectric elastomer actuator having inline transparent electrodes, that is capable of simultaneously performing focal length tuning (>100%) as well as dynamic corrections, including astigmatism and image shift. This offers control versatility to flat optics hitherto only possible in electron microscopes. The water-based transfer process, which we describe, also enables wide compatibility across materials. The combination of metasurface optics and dielectric elastomer actuators enables a new, versatile platform for creating all kinds of tunable optical devices, through the design of tunable phase, amplitude, and polarization profiles. △ Less

Submitted 6 August, 2017; originally announced August 2017.

Fabrication of Thin, Luminescent, Single-crystal Diamond Membranes

Authors: Andrew P. Magyar, Jonathan C. Lee, Andi M. Limarga, Igor Aharonovich, Fabian Rol, David R. Clarke, Mengbing Huang, Evelyn L. Hu

Abstract: The formation of single-crystal diamond membranes is an important prerequisite for the fabrication of high-quality optical cavities in this material. Diamond membranes fabricated using lift-off processes involving the creation of a damaged layer through ion implantation often suffer from residual ion damage, which severely limits their usefulness for photonic structures. The current work demonstra… ▽ More The formation of single-crystal diamond membranes is an important prerequisite for the fabrication of high-quality optical cavities in this material. Diamond membranes fabricated using lift-off processes involving the creation of a damaged layer through ion implantation often suffer from residual ion damage, which severely limits their usefulness for photonic structures. The current work demonstrates that strategic etch removal of the most highly defective material yields thin, single-crystal diamond membranes with strong photoluminescence and a Raman signature approaching that of single-crystal bulk diamond. These optically-active membranes can form the starting point for fabrication of high-quality optical resonators. △ Less

Submitted 3 August, 2011; originally announced August 2011.

Comments: To appear in APL

Local structure evolution in polycrystalline Zn$_{1-x}$Mg$_x$O ($0\leq{x}\leq{0.15}$) studied by Raman and by synchrotron x-ray pair distribution analysis

Authors: Young-Il Kim, Katharine Page, Andi M. Limarga, David R. Clarke, Ram Seshadri

Abstract: The local structures of Zn$_{1-x}$Mg$_x$O alloys have been studied by Raman spectroscopy and by synchrotron x-ray pair distribution function (PDF) analysis. Within the solid solution range ($0\leq{x}\leq{0.15}$) of Zn$_{1-x}$Mg$_x$O, the wurtzite framework is maintained with Mg homogeneously distributed throughout the wurtzite lattice. The $E_2^\mathrm{high}$ Raman line of Zn$_{1-x}$Mg$_x$O disp… ▽ More The local structures of Zn$_{1-x}$Mg$_x$O alloys have been studied by Raman spectroscopy and by synchrotron x-ray pair distribution function (PDF) analysis. Within the solid solution range ($0\leq{x}\leq{0.15}$) of Zn$_{1-x}$Mg$_x$O, the wurtzite framework is maintained with Mg homogeneously distributed throughout the wurtzite lattice. The $E_2^\mathrm{high}$ Raman line of Zn$_{1-x}$Mg$_x$O displays systematic changes in response to the evolution of the crystal lattice upon the Mg-substitution. The red-shift and broadening of the $E_2^\mathrm{high}$ mode are explained by the expansion of hexagonal $ab$-dimensions, and compositional disorder of Zn/Mg, respectively. Synchrotron x-ray PDF analyses of Zn$_{1-x}$Mg$_x$O reveal that the Mg atoms have a slightly reduced wurtzite parameter $u$ and more regular tetrahedral bond distances than the Zn atoms. For both Zn and Mg, the internal tetrahedral geometries are independent of the alloy composition. △ Less

Submitted 2 June, 2007; originally announced June 2007.

Comments: 10 pages, 12 figures RevTex

Journal ref: Phys. Rev. B 76, 115204 (2007) (10 pages)