-
An optically defined phononic crystal defect
Authors:
Thomas J. Clark,
Simon Bernard,
Jiaxing Ma,
Vincent Dumont,
Jack C. Sankey
Abstract:
We demonstrate a mechanical crystal with an optically programmable defect mode. By applying an optical spring to a single unit cell of a phononic crystal membrane, we smoothly transfer a single mechanical mode into the bandgap, thereby localizing its spatial profile from one spanning the entire crystal to one confined within a few unit cells. This localization is evidenced by an enhanced mechanica…
▽ More
We demonstrate a mechanical crystal with an optically programmable defect mode. By applying an optical spring to a single unit cell of a phononic crystal membrane, we smoothly transfer a single mechanical mode into the bandgap, thereby localizing its spatial profile from one spanning the entire crystal to one confined within a few unit cells. This localization is evidenced by an enhanced mechanical frequency shift commensurate with a 37-fold reduction in the mode's participating mass. Our results lay groundwork for a new class of optomechanical systems that control mechanical mode profile and participating mass.
△ Less
Submitted 28 June, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
Prototype Superfluid Gravitational Wave Detector
Authors:
V. Vadakkumbatt,
M. Hirschel,
J. Manley,
T. J. Clark,
S. Singh,
J. P. Davis
Abstract:
We study a cross-shaped cavity filled with superfluid $^4$He as a prototype resonant-mass gravitational wave detector. Using a membrane and a re-entrant microwave cavity as a sensitive optomechanical transducer, we were able to observe the thermally excited high-$Q$ acoustic modes of the helium at 20 mK temperature and achieved a strain sensitivity of $8 \times 10^{-19}$ Hz$^{-1/2}$ to gravitation…
▽ More
We study a cross-shaped cavity filled with superfluid $^4$He as a prototype resonant-mass gravitational wave detector. Using a membrane and a re-entrant microwave cavity as a sensitive optomechanical transducer, we were able to observe the thermally excited high-$Q$ acoustic modes of the helium at 20 mK temperature and achieved a strain sensitivity of $8 \times 10^{-19}$ Hz$^{-1/2}$ to gravitational waves. To facilitate the broadband detection of continuous gravitational waves, we tune the kilohertz-scale mechanical resonance frequencies up to 173 Hz/bar by pressurizing the helium. With reasonable improvements, this architecture will enable the search for GWs in the 1-30 kHz range, relevant for a number of astrophysical sources both within and beyond the Standard Model.
△ Less
Submitted 30 June, 2021;
originally announced July 2021.
-
Monitored wet-etch removal of individual dielectric layers from high-finesse Bragg mirrors
Authors:
Simon Bernard,
Thomas J. Clark,
Vincent Dumont,
Jiaxing Ma,
Jack C. Sankey
Abstract:
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a low-cost, single-step, monitored wet etch technique for reliably removing (or partially removing) individual SiO$_2$ and Ta$_2$O$_5$ dielectric layers, in this cas…
▽ More
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a low-cost, single-step, monitored wet etch technique for reliably removing (or partially removing) individual SiO$_2$ and Ta$_2$O$_5$ dielectric layers, in this case from a high-reflectivity fiber mirror. By immersing in acid and monitoring off-band reflected light, we show it is straightforward to iteratively (or continuously) remove six bilayers. At each stage, we characterize the coating performance with a Fabry-Pérot cavity, observing the expected stepwise decrease in finesse from 92,000$\pm$3,000 to 3,950$\pm$50, finding no evidence of added optical losses. The etch also removes the fiber's sidewall coating after a single bilayer, and, after six bilayers, confines the remaining coating to a $\sim$50-$μ$m-diameter pedestal at the center of the fiber tip. Vapor etching above the solution produces a tapered "pool cue" cladding profile, reducing the fiber diameter (nominally 125 $μ$m) to $\sim$100 $μ$m at an angle of $\sim$0.3$^\circ$ near the tip. Finally, we note that the data generated by this technique provides a sensitive estimate of the layers' optical depths. This technique could be readily adapted to free-space optics and other coatings.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
Wavelength transduction from a 3D microwave cavity to telecom using piezoelectric optomechanical crystals
Authors:
H. Ramp,
T. J. Clark,
B. D. Hauer,
C. Doolin,
K. C. Balram,
K. Srinivasan,
J. P. Davis
Abstract:
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical cry…
▽ More
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical crystal, which has been placed in the microwave electric field maximum. This allows the microwave cavity to actuate the gigahertz-frequency mechanical breathing mode in the optomechanical crystal through the piezoelectric effect, which is then read out using a telecom optical mode. The gallium arsenide optomechanical crystal is a good candidate for low-noise microwave-to-telecom transduction, as it has been previously cooled to the mechanical ground state in a dilution refrigerator. Moreover, the 3D microwave cavity architecture can naturally be extended to couple to superconducting qubits and to create hybrid quantum systems.
△ Less
Submitted 25 April, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Dueling Dynamical Backaction in a Cryogenic Optomechanical Cavity
Authors:
B. D. Hauer,
T. J. Clark,
P. H. Kim,
C. Doolin,
J. P. Davis
Abstract:
Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optome…
▽ More
Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optomechanical spring effect and the latter governing the optomechanical dam**. At high enough optical input powers, we show that the photothermal force drives the mechanical resonator into self-oscillations for a pump beam detuned to the lower-frequency side of the optical resonance, contrary to what one would expect for a radiation-pressure-dominated optomechanical device. Using a fully nonlinear model, we fit the hysteretic response of the optomechanical cavity to extract its properties, demonstrating that this non-sideband-resolved device exists in a regime where photothermal dam** could be used to cool its motion to the quantum ground state.
△ Less
Submitted 13 January, 2019;
originally announced January 2019.
-
Elimination of Thermomechanical Noise in Piezoelectric Optomechanical Crystals
Authors:
H. Ramp,
B. D. Hauer,
K. C. Balram,
T. J. Clark,
K. Srinivasan,
J. P. Davis
Abstract:
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this paper, we eli…
▽ More
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this paper, we eliminate thermomechanical noise in the GHz-frequency mechanical breathing mode of a piezoelectric optomechanical crystal using cryogenic cooling in a dilution refrigerator. We optically measure an average thermal occupancy of the mechanical mode of only $0.7\pm0.4 ~ \mathrm{phonons}$, providing a path towards low-noise microwave-to-optical conversion in the quantum regime.
△ Less
Submitted 15 June, 2019; v1 submitted 21 December, 2018;
originally announced December 2018.
-
Cryogenic Microwave Filter Cavity with a Tunability Greater than 5 GHz
Authors:
T. J. Clark,
V. Vadakkumbatt,
F. Souris,
H. Ramp,
J. P Davis
Abstract:
A wide variety of applications of microwave cavities, such as measurement and control of superconducting qubits, magnonic resonators, and phase noise filters, would be well served by having a highly tunable microwave resonance. Often this tunability is desired in situ at low temperatures, where one can take advantage of superconducting cavities. To date, such cryogenic tuning while maintaining a h…
▽ More
A wide variety of applications of microwave cavities, such as measurement and control of superconducting qubits, magnonic resonators, and phase noise filters, would be well served by having a highly tunable microwave resonance. Often this tunability is desired in situ at low temperatures, where one can take advantage of superconducting cavities. To date, such cryogenic tuning while maintaining a high quality factor has been limited to $\sim500$ MHz. Here we demonstrate a three-dimensional superconducting microwave cavity that shares one wall with a pressurized volume of helium. Upon pressurization of the helium chamber the microwave cavity is deformed, which results in in situ tuning of its resonant frequency by more than 5 GHz, greater than 60% of the original 8 GHz resonant frequency. The quality factor of the cavity remains approximately constant at $\approx7\times 10^{3}$ over the entire range of tuning. As a demonstration of its usefulness, we implement a tunable cryogenic phase noise filter, which reduces the phase noise of our source by approximately 10 dB above 400 kHz.
△ Less
Submitted 4 October, 2018;
originally announced October 2018.
-
Magnetic Actuation and Feedback Cooling of a Cavity Optomechanical Torque Sensor
Authors:
P. H. Kim,
B. D. Hauer,
T. J. Clark,
F. Fani Sani,
M. R. Freeman,
J. P. Davis
Abstract:
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermor…
▽ More
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermore, we are able to extract the magnetization (1710 kA/m) of the magnetic sample, not known a priori, demonstrating this system's potential for studies of nanomagnetism. Finally, we show that we can magnetically drive the torsional resonator into regenerative oscillations, and dampen its mechanical mode temperature from room temperature to 11.6 K, without sacrificing torque sensitivity.
△ Less
Submitted 29 July, 2017;
originally announced July 2017.
-
Backward Uniqueness for a PDE Fluid-Structure Interaction
Authors:
George Avalos,
Thomas J. Clark
Abstract:
In this work, we establish the so-called backward uniqiueness property for a coupled system of partial differential equations (PDEs) which governs a certain fluid-structure interaction. In particular, a three-dimensional Stokes flow interacts across a boundary interface with a two-dimensional mechanical plate equation. By way of attaining this result, a certain estimate is obtained for the associa…
▽ More
In this work, we establish the so-called backward uniqiueness property for a coupled system of partial differential equations (PDEs) which governs a certain fluid-structure interaction. In particular, a three-dimensional Stokes flow interacts across a boundary interface with a two-dimensional mechanical plate equation. By way of attaining this result, a certain estimate is obtained for the associated semigroup generator resolvent.
△ Less
Submitted 1 August, 2014;
originally announced August 2014.
-
A Mixed Variational Formulation for the Wellposedness and Numerical Approximation of a PDE Model Arising in a 3-D Fluid-Structure Interation
Authors:
George Avalos,
Thomas J. Clark
Abstract:
We will present qualitative and numerical results on a partial differential equation (PDE) system which models a certain fluid-structure dynamics. The wellposedness of this PDE model is established by means of constructing for it a nonstandard semigroup generator representation; this representation is essentially accomplished by an appropriate elimination of the pressure. This coupled PDE model in…
▽ More
We will present qualitative and numerical results on a partial differential equation (PDE) system which models a certain fluid-structure dynamics. The wellposedness of this PDE model is established by means of constructing for it a nonstandard semigroup generator representation; this representation is essentially accomplished by an appropriate elimination of the pressure. This coupled PDE model involves the Stokes system which evolves on a three dimensional domain $\mathcal{O}$ being coupled to a fourth order plate equation, possibly with rotational inertia parameter $ρ>0$, which evolves on a flat portion $Ω$ of the boundary of $\mathcal{O}$. The coupling on $Ω$ is implemented via the Dirichlet trace of the Stokes system fluid variable - and so the no-slip condition is necessarily not in play - and via the Dirichlet boundary trace of the pressure, which essentially acts as a forcing term on this elastic portion of the boundary. We note here that inasmuch as the Stokes fluid velocity does not vanish on $Ω$, the pressure variable cannot be eliminated by the classic Leray projector; instead, the pressure is identified as the solution of a certain elliptic boundary value problem. Eventually, wellposedness of this fluid-structure dynamics is attained through a certain nonstandard variational (``inf-sup") formulation. Subsequently we show how our constructive proof of wellposedness naturally gives rise to a certain mixed finite element method for numerically approximating solutions of this fluid-structure dynamics.
△ Less
Submitted 25 February, 2014; v1 submitted 17 November, 2013;
originally announced November 2013.