-
Stabilisation of falling liquid films with restricted observations
Authors:
Oscar A. Holroyd,
Radu Cimpeanu,
Susana N. Gomes
Abstract:
We propose a method to stabilise a solution to equations describing the interface of thin liquid films falling under gravity with a finite number of actuators and restricted observations. As for many complex systems, full observation of the system state is challenging in physical settings, so methods able to take this into account are important. The Navier-Stokes equations modelling the flow are a…
▽ More
We propose a method to stabilise a solution to equations describing the interface of thin liquid films falling under gravity with a finite number of actuators and restricted observations. As for many complex systems, full observation of the system state is challenging in physical settings, so methods able to take this into account are important. The Navier-Stokes equations modelling the flow are a complex, highly nonlinear set of PDEs, so standard control theoretical results are not applicable. Instead, we chain together a hierarchy of increasingly idealised approximations, develo** a control strategy for the simplified model which is shown to be successfully applied to simulations of the full system.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Modelling droplet rebounds off fluid baths
Authors:
Katie A Phillips,
Radu Cimpeanu,
Paul A Milewski
Abstract:
In order for a droplet to rebound rather than coalesce from a liquid surface, there must be a layer of air persisting throughout the impact. This air layer acts as a lubricant to the system and permits a pressure transfer between the two liquid bodies. Through considering the bath, air, and drop regions of fluid, we introduce a fully coupled reduced dynamic model of two-dimensional droplets reboun…
▽ More
In order for a droplet to rebound rather than coalesce from a liquid surface, there must be a layer of air persisting throughout the impact. This air layer acts as a lubricant to the system and permits a pressure transfer between the two liquid bodies. Through considering the bath, air, and drop regions of fluid, we introduce a fully coupled reduced dynamic model of two-dimensional droplets rebounding off liquid baths, which incorporates a evolving lubricating air layer. Numerical solutions of the lubrication-mediated model are compared to widely used direct numerical simulation (DNS) of the Navier-Stokes equations. The reduced model captures rebounding dynamics well in the regime where it is most relevant: for low speed impacts of small droplets, where capillary forces are important. Numerically, the reduced model is efficient, allowing for the computation of multiple rebounds and of long time dynamics of droplets rebounding on a vibrating bath. Furthermore, the lubrication-mediated model is able to provide detailed information within the air layer such as pressure and lubrication-layer geometry, which is often omitted from reduced models, and typically obtained by higher resolution but higher cost DNS methods.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
A new flow-based design for double-lumen needles
Authors:
Radu Cimpeanu,
Alfonso A. Castrejon-Pita,
Lee Nai Lim,
Manu Vatish,
Ektoras X. Georgiou
Abstract:
Oocyte retrieval forms a crucial part of in vitro fertilisation treatment and its ultimate outcome. Standard double-lumen needles, which include a sequence of aspiration and flushing steps, are characterised by a similar success rate to single-lumen needles, despite their increased cost. A novel hydrodynamics-based needle called the OxIVF needle is proposed here, which is geared towards the genera…
▽ More
Oocyte retrieval forms a crucial part of in vitro fertilisation treatment and its ultimate outcome. Standard double-lumen needles, which include a sequence of aspiration and flushing steps, are characterised by a similar success rate to single-lumen needles, despite their increased cost. A novel hydrodynamics-based needle called the OxIVF needle is proposed here, which is geared towards the generation of an internal flow field within the full follicular volume via laterally, rather than frontally, oriented flushing, leading to successful retrievals with no additional stress on the oocyte. A two-dimensional digital twin of the follicular environment is created and tested via multi-phase flow direct numerical simulation. Oocyte initial location within the follicle is varied, while quantities of interest such as velocity magnitude and vorticity are measured with a high level of precision. This provides insight into the overall fluid motion, as well as the trajectory and stresses experienced by the oocyte. A comparative benchmark set of tests indicated a higher success rate of the OxIVF needle of up to 100%, marking a significant improvement over the traditional double-lumen design whose success rate of no more than 75% was also highly dependent on the location of the needle tip inside the follicle. All forces measured during these tests showcase how the oocyte experiences stresses which are no larger than at the aspiration point, with the flow field providing a gentle steering effect towards the extraction region. Finally, the flow generation strategy maximises oocyte yield, unlocking new capabilities in both human and veterinary contexts.
△ Less
Submitted 5 October, 2023; v1 submitted 10 May, 2023;
originally announced May 2023.
-
Linear quadratic regulation control for falling liquid films
Authors:
Oscar A. Holroyd,
Radu Cimpeanu,
Susana N. Gomes
Abstract:
We propose and analyse a new methodology based on linear-quadratic regulation (LQR) for stabilising falling liquid films via blowing and suction at the base. LQR methods enable rapidly responding feedback control by precomputing a gain matrix, but are only suitable for systems of linear ordinary differential equations (ODEs). By contrast, the Navier-Stokes equations that describe the dynamics of a…
▽ More
We propose and analyse a new methodology based on linear-quadratic regulation (LQR) for stabilising falling liquid films via blowing and suction at the base. LQR methods enable rapidly responding feedback control by precomputing a gain matrix, but are only suitable for systems of linear ordinary differential equations (ODEs). By contrast, the Navier-Stokes equations that describe the dynamics of a thin liquid film flowing down an inclined plane are too complex to stabilise with standard control-theoretical techniques. To bridge this gap we use reduced-order models - the Benney equation and a weighted-residual integral boundary layer model - obtained via asymptotic analysis to derive a multi-level control framework. This framework consists of an LQR feedback control designed for a linearised and discretised system of ODEs approximating the reduced-order system, which is then applied to the full Navier-Stokes system. The control scheme is tested via direct numerical simulation (DNS), and compared to analytical predictions of linear stability thresholds and minimum required actuator numbers. Comparing the strategy between the two reduced-order models we show that in both cases we can successfully stabilise towards a uniform flat film across their respective ranges of valid parameters, with the more accurate weighted-residual model outperforming the Benney-derived controls. The weighted-residual controls are also found to work successfully far beyond their anticipated range of applicability. The proposed methodology increases the feasibility of transferring robust control techniques towards real-world systems, and is also generalisable to other forms of actuation.
△ Less
Submitted 9 July, 2023; v1 submitted 26 January, 2023;
originally announced January 2023.
-
Inertio-capillary rebound of a droplet impacting a fluid bath
Authors:
Luke F. L. Alventosa,
Radu Cimpeanu,
Daniel M. Harris
Abstract:
The rebound of droplets impacting a deep fluid bath is studied both experimentally and theoretically. Millimetric drops are generated using a piezoelectric droplet-on-demand generator and normally impact a bath of the same fluid. Measurements of the droplet trajectory and other rebound metrics are compared directly to the predictions of a linear quasi-potential model, as well as fully resolved dir…
▽ More
The rebound of droplets impacting a deep fluid bath is studied both experimentally and theoretically. Millimetric drops are generated using a piezoelectric droplet-on-demand generator and normally impact a bath of the same fluid. Measurements of the droplet trajectory and other rebound metrics are compared directly to the predictions of a linear quasi-potential model, as well as fully resolved direct numerical simulations (DNS) of the unsteady Navier-Stokes equations. Both models resolve the time-dependent bath and droplet shapes in addition to the droplet trajectory. In the quasi-potential model, the droplet and bath shape are decomposed using orthogonal function decompositions leading to two sets of coupled damped linear harmonic oscillator equations solved using an implicit numerical method. The underdamped dynamics of the drop are directly coupled to the response of the bath through a single-point kinematic match condition which we demonstrate to be an effective and efficient model in our parameter regime of interest. Starting from the inertio-capillary limit in which both gravitational and viscous effects are negligible, increases in gravity or viscosity lead to a decrease in the coefficient of restitution and an increase in the contact time. The inertio-capillary limit defines an upper bound on the possible coefficient of restitution for droplet-bath impact, depending only on the Weber number. The quasi-potential model is able to rationalize historical experimental measurements for the coefficient of restitution, first presented by Jayaratne and Mason (1964).
△ Less
Submitted 20 January, 2023; v1 submitted 27 September, 2022;
originally announced September 2022.
-
Electrostatic control of the Navier-Stokes equations for thin films
Authors:
Alexander W. Wray,
Radu Cimpeanu,
Susana N. Gomes
Abstract:
A robust control scheme is derived and tested for the Navier-Stokes equations for two-dimensional multiphase flow of a thin film underneath an inclined solid surface. Control is exerted via the use of an electrode parallel to the substrate, which induces an electric field in the gas phase, and a resultant Maxwell stress at the liquid-gas interface. The imposed potential at the second electrode is…
▽ More
A robust control scheme is derived and tested for the Navier-Stokes equations for two-dimensional multiphase flow of a thin film underneath an inclined solid surface. Control is exerted via the use of an electrode parallel to the substrate, which induces an electric field in the gas phase, and a resultant Maxwell stress at the liquid-gas interface. The imposed potential at the second electrode is derived using a model predictive control loop, together with optimal control of a high-fidelity reduced-dimensional model. In this implementation the interfacial shape of the fluid is successfully controlled; however, the algorithm is sufficiently general to control any other quantity of interest.
△ Less
Submitted 27 December, 2022; v1 submitted 25 July, 2022;
originally announced July 2022.
-
Capillary-scale solid rebounds: experiments, modelling and simulations
Authors:
Carlos A. Galeano-Rios,
Radu Cimpeanu,
Isabelle A. Bauman,
Annika MacEwen,
Paul A. Milewski,
Daniel M. Harris
Abstract:
A millimetre-size superhydrophobic sphere impacting on the free surface of a quiescent bath can be propelled back into the air by capillary effects and dynamic fluid forces, whilst transferring part of its energy to the fluid. We report the findings of a thorough investigation of this phenomenon, involving different approaches. Over the range from minimum impact velocities required to produce rebo…
▽ More
A millimetre-size superhydrophobic sphere impacting on the free surface of a quiescent bath can be propelled back into the air by capillary effects and dynamic fluid forces, whilst transferring part of its energy to the fluid. We report the findings of a thorough investigation of this phenomenon, involving different approaches. Over the range from minimum impact velocities required to produce rebounds to impact velocities that cause the sinking of the solid sphere, we focus on the dependence of the coefficient of restitution, contact time and maximum surface deflection on the different physical parameters of the problem. Experiments, simulations and asymptotic analysis reveal trends in the rebound metrics, uncover new phenomena at both ends of the Weber number spectrum, and collapse the data. Direct numerical simulations using a pseudo-solid sphere successfully reproduce experimental data whilst also providing insight into flow quantities that are challenging to determine from experiments. A model based on matching the motion of a perfectly hydrophobic impactor to a linearised fluid free surface is validated against direct numerical simulations and used in the low Weber number regime. The hierarchical and cross-validated models in this study allow us to explore the entirety of our target parameter space within a challenging multi-scale system.
△ Less
Submitted 14 December, 2020; v1 submitted 30 October, 2020;
originally announced November 2020.
-
Droplet impact onto a spring-supported plate: analysis and simulations
Authors:
Michael J. Negus,
Matthew R. Moore,
James M. Oliver,
Radu Cimpeanu
Abstract:
The high-speed impact of a droplet onto a flexible substrate is a highly nonlinear process of practical importance which poses formidable modelling challenges in the context of fluid-structure interaction. We present two approaches aimed at investigating the canonical system of a droplet impacting onto a rigid plate supported by a spring and a dashpot: matched asymptotic expansions and direct nume…
▽ More
The high-speed impact of a droplet onto a flexible substrate is a highly nonlinear process of practical importance which poses formidable modelling challenges in the context of fluid-structure interaction. We present two approaches aimed at investigating the canonical system of a droplet impacting onto a rigid plate supported by a spring and a dashpot: matched asymptotic expansions and direct numerical simulation (DNS). In the former, we derive a generalisation of inviscid Wagner theory to approximate the flow behaviour during the early stages of the impact. In the latter, we perform detailed DNS designed to validate the analytical framework, as well as provide insight into later times beyond the reach of the proposed mathematical model. Drawing from both methods, we observe the strong influence that the mass of the plate, resistance of the dashpot and stiffness of the spring have on the motion of the solid, which undergoes forced damped oscillations. Furthermore, we examine how the plate motion affects the dynamics of the droplet, predominantly through altering its internal hydrodynamic pressure distribution. We build on the interplay between these techniques, demonstrating that a hybrid approach leads to improved model and computational development, as well as result interpretation, across multiple length- and time-scales.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Active control of liquid film flows: beyond reduced-order models
Authors:
Radu Cimpeanu,
Susana N. Gomes,
Demetrios T. Papageorgiou
Abstract:
The ability to robustly and efficiently control the dynamics of nonlinear systems lies at the heart of many current technological challenges, ranging from drug delivery systems to ensuring flight safety. Most such scenarios are too complex to tackle directly and reduced-order modelling is used in order to create viable representations of the target systems. The simplified setting allows for the de…
▽ More
The ability to robustly and efficiently control the dynamics of nonlinear systems lies at the heart of many current technological challenges, ranging from drug delivery systems to ensuring flight safety. Most such scenarios are too complex to tackle directly and reduced-order modelling is used in order to create viable representations of the target systems. The simplified setting allows for the development of rigorous control theoretical approaches, but the propagation of their effects back up the hierarchy and into real-world systems remains a significant challenge. Using the canonical setup of a liquid film falling down an inclined plane under the action of active feedback controls in the form of blowing and suction, we develop a multi-level modelling framework containing both analytical models and direct numerical simulations acting as an in silico experimental platform. Constructing strategies at the inexpensive lower levels in the hierarchy, we find that offline control transfer is not viable, however analytically-informed feedback strategies show excellent potential, even far beyond the anticipated range of applicability of the models. The detailed effects of the controls in terms of stability and treatment of nonlinearity are examined in detail in order to gain understanding of the information transfer inside the flows, which can aid transition towards other control-rich frameworks and applications.
△ Less
Submitted 14 February, 2021; v1 submitted 28 August, 2020;
originally announced August 2020.
-
Deformation and dewetting of liquid films under gas jets
Authors:
C. J. Ojiako,
R. Cimpeanu,
H. Bandulasena,
R. Smith,
D. Tseluiko
Abstract:
We study the deformation and dewetting of liquid films under im**ing gas jets using experimental, analytical and numerical techniques. We first derive a reduced-order model (a thin-film equation) based on the long-wave assumption and on appropriate decoupling of the gas problem from that for the liquid. The model not only provides insight into relevant flow regimes, but is also used in conjuncti…
▽ More
We study the deformation and dewetting of liquid films under im**ing gas jets using experimental, analytical and numerical techniques. We first derive a reduced-order model (a thin-film equation) based on the long-wave assumption and on appropriate decoupling of the gas problem from that for the liquid. The model not only provides insight into relevant flow regimes, but is also used in conjunction with experimental data to guide more computationally prohibitive direct numerical simulations (DNS) of the full governing equations. A unique feature of our modelling solution is the use of an efficient iterative procedure in order to update the interfacial deformation based on stresses originating from computational data. We show that both gas normal and tangential stresses are equally important for achieving accurate predictions. The interplay between these techniques allows us to study previously unreported flow features. These include finite-size effects of the host geometry, with consequences for flow and vortex formation inside the liquid, as well as the specific individual contributions from the non-trivial gas flow components on interfacial deformation. Dewetting phenomena are found to depend on either a dominant gas flow or contact line motion, with the observed behaviour (including healing effects) being explained using a bifurcation diagram of steady-state solutions in the absence of the gas flow.
△ Less
Submitted 5 September, 2020; v1 submitted 18 January, 2020;
originally announced January 2020.
-
Instability and drip** of electrified liquid films flowing down inverted substrates
Authors:
Ruben J Tomlin,
Radu Cimpeanu,
Demetrios T Papageorgiou
Abstract:
We consider the gravity-driven flow of a perfect dielectric, viscous, thin liquid film, wetting a flat substrate inclined at a non-zero angle to the horizontal. The dynamics of the thin film is influenced by an electric field which is set up parallel to the substrate surface - this nonlocal physical mechanism has a linearly stabilizing effect on the interfacial dynamics. Our particular interest is…
▽ More
We consider the gravity-driven flow of a perfect dielectric, viscous, thin liquid film, wetting a flat substrate inclined at a non-zero angle to the horizontal. The dynamics of the thin film is influenced by an electric field which is set up parallel to the substrate surface - this nonlocal physical mechanism has a linearly stabilizing effect on the interfacial dynamics. Our particular interest is in fluid films that are hanging from the underside of the substrate; these films may drip depending on physical parameters, and we investigate whether a sufficiently strong electric field can suppress such nonlinear phenomena. For a non-electrified flow, it was observed by Brun et al. (Phys. Fluids 27, 084107, 2015) that the thresholds of linear absolute instability and drip** are reasonably close. In the present study, we incorporate an electric field and analyse the absolute/convective instabilities of a hierarchy of reduced-order models to predict the drip** limit in parameter space. The spatial stability results for the reduced-order models are verified by performing an impulse-response analysis with direct numerical simulations (DNS) of the Navier-Stokes equations coupled to the appropriate electrical equations. Guided by the results of the linear theory, we perform DNS on extended domains with inflow/outflow conditions (mimicking an experimental set-up) to investigate the drip** limit for both non-electrified and electrified liquid films. For the latter, we find that the absolute instability threshold provides an order-of-magnitude estimate for the electric field strength required to suppress drip**; the linear theory may thus be used to determine the feasibility of drip** suppression given a set of geometrical, fluid and electrical parameters.
△ Less
Submitted 29 August, 2019; v1 submitted 20 June, 2019;
originally announced June 2019.
-
Three-dimensional high speed drop impact onto solid surfaces at arbitrary angles
Authors:
Radu Cimpeanu,
Demetrios T. Papageorgiou
Abstract:
The rich structures arising from the im**ement dynamics of water drops onto solid substrates at high velocities are investigated numerically. Current methodologies in the aircraft industry estimating water collection on aircraft surfaces are based on particle trajectory calculations and empirical extensions thereof in order to approximate the complex fluid-structure interactions. We perform dire…
▽ More
The rich structures arising from the im**ement dynamics of water drops onto solid substrates at high velocities are investigated numerically. Current methodologies in the aircraft industry estimating water collection on aircraft surfaces are based on particle trajectory calculations and empirical extensions thereof in order to approximate the complex fluid-structure interactions. We perform direct numerical simulations (DNS) using the volume-of-fluid method in three dimensions, for a collection of drop sizes and im**ement angles. The high speed background air flow is coupled with the motion of the liquid in the framework of oblique stagnation-point flow. Qualitative and quantitative features are studied in both pre- and post-impact stages. One-to-one comparisons are made with experimental data available from the investigations of Sor et al. (Journal of Aircraft 52 (6), pp. 1838-1846, 2015), while the main body of results is created using parameters relevant to flight conditions with droplet sizes in the ranges from tens to several hundreds of microns, as presented by Papadakis et al. (AIAA Aerospace Sciences Meeting and Exhibit 0565, pp. 1-40, 2004). Drop deformation, collision, coalescence and microdrop ejection and dynamics, all typically neglected or empirically modelled, are accurately accounted for. In particular, we identify new morphological features in regimes below the splashing threshold in the modelled conditions. We then expand on the variation in the number and distribution of ejected microdrops as a function of the impacting drop size beyond this threshold. The presented model of drop impact addresses key questions at a fundamental level, however the conclusions of the study extend towards the advancement of understanding of water dynamics on aircraft surfaces, which has important implications in terms of compliance to aircraft safety regulations.
△ Less
Submitted 3 April, 2018; v1 submitted 16 November, 2017;
originally announced November 2017.
-
Electrohydrodynamically induced mixing in immiscible multilayer flows
Authors:
Radu Cimpeanu,
Demetrios T. Papageorgiou
Abstract:
In the present study we investigate electrostatic stabilization mechanisms acting on stratified fluids. Electric fields have been shown to control and even suppress the Rayleigh-Taylor instability when a heavy fluid lies above lighter fluid. From a different perspective, similar techniques can also be used to generate interfacial dynamics in otherwise stable systems. We aim to identify active cont…
▽ More
In the present study we investigate electrostatic stabilization mechanisms acting on stratified fluids. Electric fields have been shown to control and even suppress the Rayleigh-Taylor instability when a heavy fluid lies above lighter fluid. From a different perspective, similar techniques can also be used to generate interfacial dynamics in otherwise stable systems. We aim to identify active control protocols in confined geometries that induce time dependent flows in small scale devices without having moving parts. This effect has numerous applications, ranging from mixing phenomena to electric lithography. Two-dimensional computations are carried out and several such protocols are described. We present computational fluid dynamics videos with different underlying mixing strategies, which show promising results.
△ Less
Submitted 12 October, 2013;
originally announced October 2013.
