Showing 1–49 of 49 results for author: Ciavarella, M

Bulk and fracture process zone contribution to the rate-dependent adhesion amplification in viscoelastic broad-band materials

Authors: Ali Maghami, Qingao Wang, Michele Tricarico, Michele Ciavarella, Qunyang Li, Antonio Papangelo

Abstract: The contact between a rigid Hertzian indenter and an adhesive broad-band viscoelastic substrate is considered. The material behaviour is described by a modified power law model, which is characterized by only four parameters, the glassy and rubbery elastic moduli, a characteristic exponent n and a timescale $τ_0$. The maximum adherence force that can be reached while unloading the rigid indenter f… ▽ More The contact between a rigid Hertzian indenter and an adhesive broad-band viscoelastic substrate is considered. The material behaviour is described by a modified power law model, which is characterized by only four parameters, the glassy and rubbery elastic moduli, a characteristic exponent n and a timescale $τ_0$. The maximum adherence force that can be reached while unloading the rigid indenter from a relaxed viscoelastic half-space is studied by means of a numerical implementation based on the boundary element method, as a function of the unloading velocity, preload and by varying the broadness of the viscoelastic material spectrum. Through a comprehensive numerical analysis we have determined the minimum contact radius that is needed to achieve the maximum amplification of the pull-off force at a specified unloading rate and for different material exponents n. The numerical results are then compared with the prediction of Persson and Brener viscoelastic crack propagation theory, providing excellent agreement. However, comparison against experimental tests for a glass lens indenting a PDMS substrate show data can be fitted with the linear theory only up to an unloading rate of about $100 \textrm{ $μ$}$m/s showing the fracture process zone rate-dependent contribution to the energy enhancement is of the same order of the bulk dissipation contribution. Hence, the limitations of the current numerical and theoretical models for viscoelastic adhesion are discussed in light of the most recent literature results. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Viscoelastic amplification of the pull-off stress in the detachment of a rigid flat punch from an adhesive soft viscoelastic layer

Authors: Ali Maghami, Michele Ciavarella, Antonio Papangelo

Abstract: The problem of the detachment of a sufficiently large flat indenter from a plane adhesive viscoelastic strip of thickness "b" is studied. For any given retraction speed, three different detachment regimes are found: (i) for very small "b" the detachment stress is constant and equal to the theoretical strength of the interface, (ii) for intermediate values of "b" the detachment stress decays approx… ▽ More The problem of the detachment of a sufficiently large flat indenter from a plane adhesive viscoelastic strip of thickness "b" is studied. For any given retraction speed, three different detachment regimes are found: (i) for very small "b" the detachment stress is constant and equal to the theoretical strength of the interface, (ii) for intermediate values of "b" the detachment stress decays approximately as b^(-1/2), (iii) for thick layers a constant detachment stress is obtained corresponding to case the punch is detaching from a halfplane. By using the boundary element method a comprehensive numerical study is performed which assumes a linear viscoelastic material with a single relaxation time and a Lennard-Jones force-separation law. Pull-off stress is found to consistently and monotonically increase with unloading rate, but to be almost insensitive to the history of the contact. Due to viscoelasticity, unloading at high enough retraction velocity may allow punches of macroscopic size to reach the theoretical strength of the interface. Finally, a corrective term in Greenwood or Persson theories considering finite size effects is proposed. Theoretical and numerical results are found in very good agreement. △ Less

Submitted 4 April, 2024; v1 submitted 11 October, 2023; originally announced October 2023.

Detachment of a rigid flat punch from a viscoelastic material

Authors: Antonio Papangelo, Michele Ciavarella

Abstract: We show that the detachment of a flat punch from a viscoelastic substrate has a relatively simple behavior, framed between the Kendall's elastic solution at the relaxed modulus and at the instantaneous modulus, and the cohesive strength limit. We find hardly any dependence of the pull-off force on the details of the loading process, including maximum indentation at preload and loading rate, result… ▽ More We show that the detachment of a flat punch from a viscoelastic substrate has a relatively simple behavior, framed between the Kendall's elastic solution at the relaxed modulus and at the instantaneous modulus, and the cohesive strength limit. We find hardly any dependence of the pull-off force on the details of the loading process, including maximum indentation at preload and loading rate, resulting much simpler than the case of a spherical punch. Pull-off force peaks at the highest speeds of unloading, when energy dissipation is negligible, which seems to be in contrast with what suggested by the theories originated by de Gennes of viscoelastic semi-infinite crack propagation which associated enhanced work of adhesion to dissipation. Further qualitative differences with the dissipation-based model occur to explain the finite size effect. △ Less

Submitted 3 April, 2023; v1 submitted 24 November, 2022; originally announced November 2022.

On the training of sparse and dense deep neural networks: less parameters, same performance

Authors: Lorenzo Chicchi, Lorenzo Giambagli, Lorenzo Buffoni, Timoteo Carletti, Marco Ciavarella, Duccio Fanelli

Abstract: Deep neural networks can be trained in reciprocal space, by acting on the eigenvalues and eigenvectors of suitable transfer operators in direct space. Adjusting the eigenvalues, while freezing the eigenvectors, yields a substantial compression of the parameter space. This latter scales by definition with the number of computing neurons. The classification scores, as measured by the displayed accur… ▽ More Deep neural networks can be trained in reciprocal space, by acting on the eigenvalues and eigenvectors of suitable transfer operators in direct space. Adjusting the eigenvalues, while freezing the eigenvectors, yields a substantial compression of the parameter space. This latter scales by definition with the number of computing neurons. The classification scores, as measured by the displayed accuracy, are however inferior to those attained when the learning is carried in direct space, for an identical architecture and by employing the full set of trainable parameters (with a quadratic dependence on the size of neighbor layers). In this Letter, we propose a variant of the spectral learning method as appeared in Giambagli et al {Nat. Comm.} 2021, which leverages on two sets of eigenvalues, for each map** between adjacent layers. The eigenvalues act as veritable knobs which can be freely tuned so as to (i) enhance, or alternatively silence, the contribution of the input nodes, (ii) modulate the excitability of the receiving nodes with a mechanism which we interpret as the artificial analogue of the homeostatic plasticity. The number of trainable parameters is still a linear function of the network size, but the performances of the trained device gets much closer to those obtained via conventional algorithms, these latter requiring however a considerably heavier computational cost. The residual gap between conventional and spectral trainings can be eventually filled by employing a suitable decomposition for the non trivial block of the eigenvectors matrix. Each spectral parameter reflects back on the whole set of inter-nodes weights, an attribute which we shall effectively exploit to yield sparse networks with stunning classification abilities, as compared to their homologues trained with conventional means. △ Less

Submitted 17 June, 2021; originally announced June 2021.

Crack propagation at the interface between viscoelastic and elastic materials

Authors: M. Ciavarella, R. McMeeking

Abstract: Crack propagation in viscoelastic materials has been understood with the use of Barenblatt cohesive models by many authors since the 1970's. In polymers and metal creep, it is customary to assume that the relaxed modulus is zero, so that we have typically a crack speed which depends on some power of the stress intensity factor. Generally, when there is a finite relaxed modulus, it has been shown t… ▽ More Crack propagation in viscoelastic materials has been understood with the use of Barenblatt cohesive models by many authors since the 1970's. In polymers and metal creep, it is customary to assume that the relaxed modulus is zero, so that we have typically a crack speed which depends on some power of the stress intensity factor. Generally, when there is a finite relaxed modulus, it has been shown that the toughness increases between a value at very low speeds at a threshold toughness G0, to a very fast fracture value at Ginf, and that the enhancement factor in infinite systems (where the classical singular fracture mechanics field dominates) simply corresponds to the ratio of instantaneous to relaxed elastic moduli. Here, we apply a cohesive model for the case of a bimaterial interface between an elastic and a viscoelastic material, assuming the crack remains at the interface, and neglect the details of bimaterial singularity. For the case of a Maxwell material at low speeds the crack propagates with a speed which depends only on viscosity, and the fourth power of the stress intensity factor, and not on the elastic moduli of either material. For the Schapery type of power law material with no relaxation modulus, there are more general results. For arbitrary viscoelastic materials with nonzero relaxed modulus, we show that the maximum toughness enhancement will be reduced with respect to that of a classical viscoelastic crack in homogeneous material. △ Less

Submitted 16 December, 2020; originally announced December 2020.

Comments: 19 pages; 4 figures

Stickiness of randomly rough surfaces with high fractal dimension: is there a fractal limit?

Authors: G. Violano, A. Papangelo, M. Ciavarella

Abstract: Two surfaces are "sticky" if breaking their mutual contact requires a finite tensile force. At low fractal dimensions D, there is consensus stickiness does not depend on the upper truncation frequency of roughness spectrum (or "magnification"). As debate is still open for the case at high D, we exploit BAM theory of Ciavarella and Persson-Tosatti theory, to derive criteria for all fractal dimensio… ▽ More Two surfaces are "sticky" if breaking their mutual contact requires a finite tensile force. At low fractal dimensions D, there is consensus stickiness does not depend on the upper truncation frequency of roughness spectrum (or "magnification"). As debate is still open for the case at high D, we exploit BAM theory of Ciavarella and Persson-Tosatti theory, to derive criteria for all fractal dimensions. For high D, we show that stickiness is more influenced by short wavelength roughness with respect to the low D case. BAM converges at high magnifications to a simple criterion which depends only on D, in agreement with theories that includes Lennard-Jones traction-gap law, while Persson-Tosatti disagrees because of its simplifying approximations. △ Less

Submitted 13 December, 2020; originally announced December 2020.

Comments: 15 pages; 5 figures

Improved Muller approximate solution of the pull-off of a sphere from a viscoelastic substrate

Authors: M. Ciavarella

Abstract: The detachment of a sphere from a viscoelastic substrate is clearly a fundamental problem. In the case viscoelastic dissipation is concentrated at the contact edge, and the work of adhesion follows a quite popular simplified model, Muller has suggested an approximate solution, which however is based on an empirical observation. We revisit Muller's solution and show it leads to very poor fitting of… ▽ More The detachment of a sphere from a viscoelastic substrate is clearly a fundamental problem. In the case viscoelastic dissipation is concentrated at the contact edge, and the work of adhesion follows a quite popular simplified model, Muller has suggested an approximate solution, which however is based on an empirical observation. We revisit Muller's solution and show it leads to very poor fitting of the actual full numerical results, particularly for the radius of contact at pull-off, and we suggest an improved fitting of the pull-off which works extremely well over a very wide range of withdrawing speeds, and correctly converges to the JKR value at very low speeds. △ Less

Submitted 11 December, 2020; originally announced December 2020.

Comments: 10 pages; 5 figures

A comment on "Discussion on the use of the strain energy release rate for fatigue delamination characterization"

Authors: M. Ciavarella, A. Papangelo, G. Cricri

Abstract: In a recent very interesting and illuminating proposal, Yao et al. (2014) have discussed the use of the strain energy release rate (SERR) as a parameter to characterize fatigue delamination growth in composite materials. They consider fatigue delamination data strongly affected by R-curve behaviour due to fibres bridging and argue that a better approach is to correlate the crack advance with the t… ▽ More In a recent very interesting and illuminating proposal, Yao et al. (2014) have discussed the use of the strain energy release rate (SERR) as a parameter to characterize fatigue delamination growth in composite materials. They consider fatigue delamination data strongly affected by R-curve behaviour due to fibres bridging and argue that a better approach is to correlate the crack advance with the total work per cycle measured in the testing machine. This seems to work better than estimating the compliance as a linear fit of experimental curves from Modified Compliance Calibration ASTM standards equations for the SERR in the classical Linear Elastic Fracture Mechanics framework. We show however that if we assume indeed linear behaviour (i.e. LEFM), the approach they introduce is perfectly equivalent to the SERR one, i.e. Paris type of laws. As well known form Barenblatt and Botvina, fatigue crack growth is a weak form of scaling, and it gives Paris classical dependence only when the crack is much longer than any other characteristic sizes. Paris' law is not a fundamental law of physics, is not an energy balance equation like Griffith, and strong size effects due to cohesive zones have been found already in concrete by Bazant. The proposal is very simple, and interesting as it would seem to suggest that a proper scaling with a cohesive model at crack tip could be predicted, although this doesn't seem to have been attempted in the Literature. The main drawback of the present proposal is that it is not predictive, but purely observational, as it requires the actual measurement of work input during the fatigue process. △ Less

Submitted 7 December, 2020; originally announced December 2020.

Comments: 3 pages; 2 figures

On the Afferrante-Carbone theory of ultratough peeling

Authors: M. Ciavarella

Abstract: In an elegant and interesting theory of ultratough peeling of an elastic tape from a viscoelastic substrate, Afferrante and Carbone (2016) find that, in contrast to the classic elastic Kendall's theory, there are conditions for which the load for steady state peeling could be arbitrarily large in steady state peeling, at low angles of peeling - what they call "ultratough" peeling. It is here shown… ▽ More In an elegant and interesting theory of ultratough peeling of an elastic tape from a viscoelastic substrate, Afferrante and Carbone (2016) find that, in contrast to the classic elastic Kendall's theory, there are conditions for which the load for steady state peeling could be arbitrarily large in steady state peeling, at low angles of peeling - what they call "ultratough" peeling. It is here shown in fact that this occurs near critical speeds where the elastic energy term of Kendall's equation is balanced by the viscoelastic dissipation. Surprisingly, this seems to lead to toughness enhancement higher than the limit value observed in a very large crack in a infinite viscoelastic body, possibly even considering a limit on the stress transmitted. Kendall's experiments in turn had considered viscoelastic tapes (rather than substrates), and his viscoelastic findinds seem to lead to a much simpler picture. The Afferrante-Carbone theory suggests the viscoelastic effect to be an on-off mechanism, since for large angles of peeling it is almost insignificant, while only below a certain threshold, this "ultratough" peeling seems to appear. Experimental and/or numerical verification would be most useful. △ Less

Submitted 5 December, 2020; originally announced December 2020.

Comments: 4 pages; 3 figures

On the interaction of viscoelasticity and waviness in enhancing the pull-off force in sphere/flat contacts

Authors: M. Ciavarella

Abstract: Motivated by roughness-induced adhesion enhancement (toughening and strengthening) in low modulus materials, we study the detachment of a sphere from a substrate in the presence of both viscoelastic dissipation at the contact edge, and roughness in the form of a single axisymmetric waviness. We show that the roughness-induced enhancement found by Guduru and coworkers for the elastic case (i.e. at… ▽ More Motivated by roughness-induced adhesion enhancement (toughening and strengthening) in low modulus materials, we study the detachment of a sphere from a substrate in the presence of both viscoelastic dissipation at the contact edge, and roughness in the form of a single axisymmetric waviness. We show that the roughness-induced enhancement found by Guduru and coworkers for the elastic case (i.e. at very small detachment speeds) tends to disappear with increasing speeds, where the viscoelastic effect dominates and the problem approaches that of a smooth sphere. This is in qualitative agreement with the original experiments of Guduru's group with gelatin. The cross-over velocity is where the two separate effects are comparable. Viscoelasticity effectively damps roughness-induced elastic instabilities, and make their effects much less important. △ Less

Submitted 12 November, 2020; originally announced November 2020.

Comments: 11 pages, 4 figures

Strain incompatibility as a source of residual stress in welding and additive manufacturing

Authors: Domenico Zaza, Michele Ciavarella, Giuseppe Zurlo

Abstract: The accumulation of residual stress during welding and additive manufacturing is an important effect that can significantly anticipate the workpiece failure. In this work we exploit the physical and analytical transparency of a 1.5D model to show that the deposition of thermally expanded material onto an elastic substrate leads to the accumulation of strain incompatibility. This field, which is th… ▽ More The accumulation of residual stress during welding and additive manufacturing is an important effect that can significantly anticipate the workpiece failure. In this work we exploit the physical and analytical transparency of a 1.5D model to show that the deposition of thermally expanded material onto an elastic substrate leads to the accumulation of strain incompatibility. This field, which is the source of residual stress in the system, introduces memory of the construction history even in the absence of plastic deformations. The model is then applied to describe the onset and the progression of residual stresses during deposition, their evolution upon cooling, and the fundamental role played by the velocity of the moving heat source. △ Less

Submitted 15 October, 2020; originally announced October 2020.

Comments on old and recent experiments of "stickiness" of a soft solid to a rough hard surface

Authors: Michele Ciavarella

Abstract: The old asperity model of Fuller and Tabor had demonstrated almost 50 years ago surprisingly good correlation with respect to quite a few experiments on the pull-off decay due to roughness of rubber spheres against roughened Perspex plates. We revisit here some features of the Fuller and Tabor model in view of the more recent theories and experiments, finding good correlation can be obtained only… ▽ More The old asperity model of Fuller and Tabor had demonstrated almost 50 years ago surprisingly good correlation with respect to quite a few experiments on the pull-off decay due to roughness of rubber spheres against roughened Perspex plates. We revisit here some features of the Fuller and Tabor model in view of the more recent theories and experiments, finding good correlation can be obtained only at intermediate resolutions, as perhaps in stylus profilometers. In general we confirm the predictions of the Persson & Tosatti and Bearing Area Model of Ciavarella, as stickiness depends largely on the long wavelength content of roughness, and not the fine features. Therefore, multi-instruments measurements should hopefully not be needed. △ Less

Submitted 18 September, 2020; originally announced September 2020.

Comments: 17 pages, 5 figures

A simplified theory of "stickiness" due to electroadhesion between rough surfaces

Authors: M. Ciavarella

Abstract: Building on theories of Persson, we derive a simpler theory for electroadhesion between rough surfaces using BAM (Bearing Area Model) of Ciavarella, or previous ideas by Persson and Tosatti. Rather surprisingly, in terms of stickiness, we obtain very simple and similar results for pure power law power spectrum density (PSD), confirming stickiness to be mainly dependent on macroscopic quantities. W… ▽ More Building on theories of Persson, we derive a simpler theory for electroadhesion between rough surfaces using BAM (Bearing Area Model) of Ciavarella, or previous ideas by Persson and Tosatti. Rather surprisingly, in terms of stickiness, we obtain very simple and similar results for pure power law power spectrum density (PSD), confirming stickiness to be mainly dependent on macroscopic quantities. We define a new dimensionless parameter for electroadhesive stickiness. △ Less

Submitted 12 October, 2019; originally announced October 2019.

Comments: 10 pages. arXiv admin note: text overlap with arXiv:1908.06380

Report number: 22

The interaction of frictional slip and adhesion for a stiff sphere on a compliant substrate

Authors: R. M. McMeeking, M. Ciavarella, G. Cricrì, K. -S. Kim

Abstract: How friction affects adhesion is addressed. The problem is considered in the context of a very stiff sphere adhering to a compliant, isotropic, linear elastic substrate, and experiencing adhesion and frictional slip relative to each other. The adhesion is considered to be driven by very large attractive tractions between the sphere and the substrate that can act only at very small distances betwee… ▽ More How friction affects adhesion is addressed. The problem is considered in the context of a very stiff sphere adhering to a compliant, isotropic, linear elastic substrate, and experiencing adhesion and frictional slip relative to each other. The adhesion is considered to be driven by very large attractive tractions between the sphere and the substrate that can act only at very small distances between them. As a consequence, the adhesion behavior can be represented by the Johnson-Kendall-Roberts model, and this is assumed to prevail also when frictional slip is occurring. Frictional slip is considered to be resisted by a uniform, constant shear traction at the slip** interface, a model that is considered to be valid for small asperities and for compliant elastomers in contact with stiff material. A model for the interaction of friction and adhesion, known to agree with some experimental data, is utilized. This model is due to Johnson, and its adhesion-friction interaction is assumed to stem, upon shrinkage of the contact area, from a postulated reversible energy release associated with frictional slip. This behavior is considered to arise from surface microstructures generated or eliminated by frictional slip, where these microstructures store some elastic strain energy in a reversible manner. The associated reversible energy release rate is derived from the energy exchanges that occur in the system. The Johnson model, and an asymptotic analysis of it for small amounts of frictional slip, is shown to be consistent with the reversible energy release rate that we identify. △ Less

Submitted 12 October, 2019; originally announced October 2019.

Comments: 11 pages

The false myth of the rise in self-citations, and the impressively positive effect of bibliometric evaluations on the increase of the impact of Italian research

Authors: Pietro D'Antuono, Michele Ciavarella

Abstract: It has recently been claimed by Baccini and coauthors that due to ANVUR's bibliometric evaluations of individuals, departments, and universities, in Italy there has been a surge in self-citations in the last ten years, thus increasing the "inwardness" of Italian research more than has happened abroad. We have studied the database of Ioannidis et al. published on 12 August 2019 of the one hundred t… ▽ More It has recently been claimed by Baccini and coauthors that due to ANVUR's bibliometric evaluations of individuals, departments, and universities, in Italy there has been a surge in self-citations in the last ten years, thus increasing the "inwardness" of Italian research more than has happened abroad. We have studied the database of Ioannidis et al. published on 12 August 2019 of the one hundred thousand most "highly cited" scientists, including about two thousand Italians, and we found that the problem of self-citations in relation to this scientific elite is not significant in Italy, while perhaps observing a small deviation in the low scores in the rankings. The effect indicated by Baccini et al. consequently, does not seem worrying for the scientific elite (we quantified it in 2 percent of the total of scientists of the "best" one hundred thousand), and is probably largely concentrated in the further less cited scientists. Evaluation agencies like ANVUR should probably exclude self-citations in future evaluations, for the noise introduced by the young researchers. The overall state of health of the Italian research system and the positive effect of the ANVUR assessments are demonstrated by the number of Italian researchers in the top one hundred thousand, which has increased by comparing the "career" databased of 22 years, with that of the "young" researchers in the "2017" database. Italy, looking at the elite researchers, not only is not the most indulgent in self-citations, but has shown the best improvements, proving that the introduction of ANVUR had a positive effect. Indeed, all countries apart from Italy have suffered a decline, even substantial (-20 percent on a national Japan scale), of the number of researchers present in the 2017 data sets compared to career data. Italy instead shows a +0.2 percent on a global basis and an impressive +11.53 percent on a national basis. △ Less

Submitted 6 October, 2019; originally announced October 2019.

Comments: 10 pages, 9 figures, 3 tables, in English

Mean stress effect on Gaßner curves interpreted as shifted Wöhler curves

Authors: Pietro D'Antuono, Michele Ciavarella

Abstract: A criterion for the mean stress effect correction in the shift factor approach for variable amplitude life prediction is presented for both smooth and notched specimens. The criterion is applied to the simple idea proposed by the authors in a previous note that Gaßner curves can be interpreted as shifted Wöhler curves. The mean stress correction used has been proposed by Smith, Watson and Topper a… ▽ More A criterion for the mean stress effect correction in the shift factor approach for variable amplitude life prediction is presented for both smooth and notched specimens. The criterion is applied to the simple idea proposed by the authors in a previous note that Gaßner curves can be interpreted as shifted Wöhler curves. The mean stress correction used has been proposed by Smith, Watson and Topper and, more in general, by Walker. By applying the correction, a new expression for the shift factor G is obtained and, through the application of the theory of the critical distances in its point variant, surprisingly G is demonstrated to be valid for both smooth and notched geometries since it does not seem to depend on the geometry, but only on the fatigue exponent and the loading history. Finally, a comparison with the SAE Keyhole test program data is added to substantiate the findings. △ Less

Submitted 29 September, 2019; originally announced September 2019.

Comments: 23 pages, 6 figures, 2 tables, 7588 words, 68 references

Universal features in "stickiness" criteria for soft adhesion with rough surfaces

Authors: Michele Ciavarella

Abstract: A very interesting recent paper by Dalvi et al. has demonstrated convincingly with adhesion experiments of a soft material with a hard rough material that the simple energy idea of Persson and Tosatti works reasonably well, namely the reduction in apparent work of adhesion is equal to the energy required to achieve conformal contact. We demonstrate here that, in terms of a stickiness criterion, th… ▽ More A very interesting recent paper by Dalvi et al. has demonstrated convincingly with adhesion experiments of a soft material with a hard rough material that the simple energy idea of Persson and Tosatti works reasonably well, namely the reduction in apparent work of adhesion is equal to the energy required to achieve conformal contact. We demonstrate here that, in terms of a stickiness criterion, this is extremely close to a criterion we derive from BAM (Bearing Area Model) of Ciavarella, and not very far from that of Violano et al. It is rather surprising that all these criteria give very close results and this also confirms stickiness to be mainly dependent on macroscopic quantities. △ Less

Submitted 18 August, 2019; originally announced August 2019.

Comments: 10 pages

Resolving a controversy about adhesion in sliding contacts

Authors: G. Cricrì, M. Ciavarella

Abstract: An interesting recent paper by Menga, Carbone & Dini (MCD, 2018, [1]), suggests that in sliding adhesive contacts, the contact area should increase due to tangential shear stresses at the interface, assumed to be constant and corresponding to a material constant. This is not observed in the known experiments, and is in sharp contrast with all the classical theories about the transition from stick… ▽ More An interesting recent paper by Menga, Carbone & Dini (MCD, 2018, [1]), suggests that in sliding adhesive contacts, the contact area should increase due to tangential shear stresses at the interface, assumed to be constant and corresponding to a material constant. This is not observed in the known experiments, and is in sharp contrast with all the classical theories about the transition from stick to sliding, both in the JKR (Griffith like) conditions which involve singular pressure and shear, as well as in full general cohesive models. We offer a rigorous thermodynamics calculation, which suggests in fact there is no qualitative contrast but a very close quantitative agreement, with previous theories. Actually, the model predicts an even stronger reduction of contact area than predicted by Savkoor and Briggs, contrary to experimental observations, so would certainly require some adjustements to consider dissipative effects. △ Less

Submitted 13 August, 2019; originally announced August 2019.

Comments: 8 pages

On the application of fracture mechanics mixed-mode models of sliding with friction and adhesion

Authors: M. Ciavarella

Abstract: As recently suggested in an interestring and stimulating paper by Menga, Carbone & Dini (MCD), applying fracture mechanics energy concepts for the case of a sliding adhesive contact, imposing also the shear stress is constant at the interface and equal to a material constant (as it seems in experiments), leads to a increase of contact area which instead is never observed. We add that the rigorous… ▽ More As recently suggested in an interestring and stimulating paper by Menga, Carbone & Dini (MCD), applying fracture mechanics energy concepts for the case of a sliding adhesive contact, imposing also the shear stress is constant at the interface and equal to a material constant (as it seems in experiments), leads to a increase of contact area which instead is never observed. We add that the rigorous MCD theory also predict a size effect and hence a distortion of the JKR curve during sliding which is also not observed in experiments. Finally, a simpler example with the pure mode I contact case, leads in the MCD theory to an unbounded contact area, which is difficult to interpret, rather than a perhaps more correct limit of the Maugis-Dugdale solution for the adhesive sphere when Tabor parameter is zero, that is DMT's solution. We discuss therefore the implications of the MCD theory, although they may be rather academic: recent semi-empirical models, with an appropriate choice of the empirical parameters, seem more promising and robust in modelling actual experiments. △ Less

Submitted 21 July, 2019; originally announced July 2019.

Comments: 10 pages, 1 figure

A comment on "A dimensionless measure for adhesion and effects of the range of adhesion in contacts of nominally flat surfaces" by M. H. Muser

Authors: Michele Ciavarella

Abstract: letter to the Editor of Trib.Int. letter to the Editor of Trib.Int. △ Less

Submitted 15 July, 2019; originally announced July 2019.

Comments: 4 pages

Shear-induced contact area anisotropy explained by a fracture mechanics model

Authors: A. Papangelo, J. Scheibert, R. Sahli, G. Pallares, M. Ciavarella

Abstract: This paper gives a theoretical analysis for the fundamental problem of anisotropy induced by shear forces onan adhesive contact, discussing the experimental data of the companion Letter. We present a fracture mechanicsmodel where two phenomenological mode-mixity functions are introduced to describe the weak couplingbetween modes I and II or I and III, which changes the effective toughness of the i… ▽ More This paper gives a theoretical analysis for the fundamental problem of anisotropy induced by shear forces onan adhesive contact, discussing the experimental data of the companion Letter. We present a fracture mechanicsmodel where two phenomenological mode-mixity functions are introduced to describe the weak couplingbetween modes I and II or I and III, which changes the effective toughness of the interface. The mode-mixityfunctions have been interpolated using the data of a single experiment and then used to predict the behavior of thewhole set of experimental observations. The model extends an idea by Johnson and Greenwood, to solve purelymode I problems of adhesion in the presence of a nonaxisymmetric Hertzian geometry, to the case of ellipticalcontacts sheared along their major or minor axis. Equality between the stress intensity factors and their criticalvalues is imposed solely at the major and minor axes. We successfully validate our model against experimentaldata. The model predicts that the punch geometry will affect both the shape and the overall decay of the shearedcontact area. △ Less

Submitted 7 June, 2019; originally announced June 2019.

Journal ref: Physical Review E , American Physical Society (APS), 2019, 99 (5), pp.053005

Shear-Induced Anisotropy in Rough Elastomer Contact

Authors: R. Sahli, G. Pallares, A. Papangelo, M. Ciavarella, C. Ducottet, N. Ponthus, J. Scheibert

Abstract: True contact between randomly rough solids consists of myriad individual micro-junctions. While their total area controls the adhesive friction force of the interface, other macroscopic features, including viscoelastic friction, wear, stiffness and electric resistance, also strongly depend on the size and shape of individual micro-junctions. Here we show that, in rough elastomer contacts, the shap… ▽ More True contact between randomly rough solids consists of myriad individual micro-junctions. While their total area controls the adhesive friction force of the interface, other macroscopic features, including viscoelastic friction, wear, stiffness and electric resistance, also strongly depend on the size and shape of individual micro-junctions. Here we show that, in rough elastomer contacts, the shape of micro-junctions significantly varies as a function of the shear force applied to the interface. This process leads to a growth of anisotropy of the overall contact interface, which saturates in macroscopic sliding regime. We show that smooth sphere/plane contacts have the same shear-induced anisotropic behaviour as individual micro-junctions, with a common scaling law over four orders of magnitude in initial area. We discuss the physical origin of the observations in the light of a fracture-based adhesive contact mechanics model, described in the companion article, which captures the smooth sphere/plane measurements. Our results shed light on a generic, overlooked source of anisotropy in rough elastic contacts, not taken into account in current rough contact mechanics models. △ Less

Submitted 7 June, 2019; originally announced June 2019.

Journal ref: Physical Review Letters, American Physical Society, 2019, 122 (21), pp.214301

Adhesive contact of model randomly rough rubber surfaces

Authors: Vito Acito, Michele Ciavarella, Alexis M Prevost, Antoine Chateauminois

Abstract: We study experimentally and theoretically the equilibrium adhesive contact between a smooth glass lens and a rough rubber surface textured with spherical microasperities with controlled height and spatial distributions. Measurements of the real contact area $A$ versus load $P$ are performed under compression by imaging the light transmitted at the microcontacts. $A(P)$ is found to be non-linear an… ▽ More We study experimentally and theoretically the equilibrium adhesive contact between a smooth glass lens and a rough rubber surface textured with spherical microasperities with controlled height and spatial distributions. Measurements of the real contact area $A$ versus load $P$ are performed under compression by imaging the light transmitted at the microcontacts. $A(P)$ is found to be non-linear and to strongly depend on the standard deviation of the asperity height distribution. Experimental results are discussed in the light of a discrete version of Fuller and Tabor's (FT) original model (\textit{Proceedings of the Royal Society A} \textbf{345} (1975) 327), which allows to take into account the elastic coupling arising from both microasperities interactions and curvature of the glass lens. Our experimental data on microcontact size distributions are well captured by our discrete extended model. We show that the elastic coupling arising from the lens curvature has a significant contribution to the $A(P)$ relationship. Our discrete model also clearly shows that the adhesion-induced effect on $A$ remains significant even for vanishingly small pull-off forces. Last, at the local asperity length scale, our measurements show that the pressure dependence of the microcontacts density can be simply described by the original FT model. △ Less

Submitted 18 February, 2019; originally announced February 2019.

On stickiness of multiscale randomly rough surfaces

Authors: G. Violano, L. Afferrante, A. Papangelo, M. Ciavarella

Abstract: We derive a very simple and effective stickiness criterion for solids having random roughness using a new asymptotic theory, which we validate with that of Persson and Scaraggi and independent numerical experiments. Previous claims that stickiness may depend on small scale quantities such as rms slopes and/or curvatures, obtained by making oversimplified assumptions on the contact area geometry, a… ▽ More We derive a very simple and effective stickiness criterion for solids having random roughness using a new asymptotic theory, which we validate with that of Persson and Scaraggi and independent numerical experiments. Previous claims that stickiness may depend on small scale quantities such as rms slopes and/or curvatures, obtained by making oversimplified assumptions on the contact area geometry, are largely incorrect, as the truncation of the PSD spectrum of roughness at short wavelengths is irrelevant. We find stickiness is destroyed typically at roughness amplitudes up to three orders of magnitude larger than the range of attractive forces. With typical nanometer values of the latter, the criterion gives justification to the qualitative well known empirical Dalhquist criterion for stickiness which demands adhesives to have elastic modulus lower than about 1MPa. The results clarifies a much debated question in both the scientific and technological world of adhesion, and may serve as benchmark for better comprehension of the role of roughness. △ Less

Submitted 25 October, 2018; originally announced October 2018.

Multistability and localization in forced cyclic symmetric structures modelled by weakly-coupled Duffing oscillators

Authors: A. Papangelo, F. Fontanela, A. Grolet, M. Ciavarella, N. Hoffmann

Abstract: Many engineering structures are composed of weakly coupled sectors assembled in a cyclic and ideally symmetric configuration, which can be simplified as forced Duffing oscillators. In this paper, we study the emergence of localized states in the weakly nonlinear regime. We show that multiple spatially localized solutions may exist, and the resulting bifurcation diagram strongly resembles the snaki… ▽ More Many engineering structures are composed of weakly coupled sectors assembled in a cyclic and ideally symmetric configuration, which can be simplified as forced Duffing oscillators. In this paper, we study the emergence of localized states in the weakly nonlinear regime. We show that multiple spatially localized solutions may exist, and the resulting bifurcation diagram strongly resembles the snaking pattern observed in a variety of fields in physics, such as optics and fluid dynamics. Moreover, in the transition from the linear to the nonlinear behaviour isolated branches of solutions are identified. Localization is caused by the hardening effect introduced by the nonlinear stiffness, and occurs at large excitation levels. Contrary to the case of mistuning, the presented localization mechanism is triggered by the nonlinearities and arises in perfectly homogeneous systems. △ Less

Submitted 17 October, 2018; originally announced October 2018.

The role of adhesion in contact mechanics

Authors: M. Ciavarella, J. Joe, A. Papangelo, JR Barber

Abstract: Adhesive [e.g. van der Waals] forces were not generally taken into account in contact mechanics until 1971, when Johnson, Kendall and Roberts (JKR) generalized Hertz' solution for an elastic sphere using an energetic argument which we now recognize to be analogous to that used in linear elastic fracture mechanics. A significant result is that the load-displacement relation exhibits instabilities i… ▽ More Adhesive [e.g. van der Waals] forces were not generally taken into account in contact mechanics until 1971, when Johnson, Kendall and Roberts (JKR) generalized Hertz' solution for an elastic sphere using an energetic argument which we now recognize to be analogous to that used in linear elastic fracture mechanics. A significant result is that the load-displacement relation exhibits instabilities in which approaching bodies `jump in' to contact, whereas separated bodies `jump out' at a tensile `pull-off force'. The JKR approach has since been widely used in other geometries, but at small length scales or for stiffer materials it is found to be less accurate. In conformal contact problems, other instabilities can occur, characterized by the development of regular patterns of regions of large and small traction. All these instabilities result in differences between loading and unloading curves and consequent hysteretic energy losses. Adhesive contact mechanics has become increasingly important in recent years with the focus on soft materials [which generally permit larger areas of the interacting surfaces to come within the range of adhesive forces], nano-devices and the analysis of bio-systems. Applications are found in nature, such as insect attachment forces, in nano-manufacturing, and more generally in industrial systems involving rubber or polymer contacts. In this paper, we review the strengths and limitations of various methods for analyzing contact problems involving adhesive tractions, with particular reference to the effect of the inevitable roughness of the contacting surfaces. △ Less

Submitted 10 October, 2018; originally announced October 2018.

On mixed-mode fracture mechanics models for contact area reduction under shear load in soft materials

Authors: A. Papangelo, M. Ciavarella

Abstract: The fundamental problem of friction in the presence of macroscopic adhesion, as in soft bodies, is receiving interest from many experimentalists. Since the first fracture mechanics `purely brittle' model of Savkoor and Briggs, models have been proposed where the mixed mode toughness is interpreted with phenomenological fitting coefficients introducing weaker coupling between modes than expected by… ▽ More The fundamental problem of friction in the presence of macroscopic adhesion, as in soft bodies, is receiving interest from many experimentalists. Since the first fracture mechanics `purely brittle' model of Savkoor and Briggs, models have been proposed where the mixed mode toughness is interpreted with phenomenological fitting coefficients introducing weaker coupling between modes than expected by the "purely brittle" model. We compare here two such previously proposed models and introduce a third one to show that the transition to sliding is very sensitive to the form of the mixed-mode model. In particular, after a quadratic decay of the contact area with load for modest tangential loads, there could be an inflexion point and an asymptotic limit, or a jump to the Hertzian contact area. We find also that the unstable points are different under load or displacement control. The idea that the mixed mode function and parameter should be an interface property may be erroneous. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Comments: 15 pages, 15 figures

Some further validations and comparison of the Bearing Area Model (BAM) for adhesion of rough surfaces

Authors: M. Ciavarella

Abstract: In the present short note, we attempt further validations and comparisons of a recent simple model for the estimate for adhesion between elastic (hard) rough solids with Gaussian multiple scales of roughness, BAM (Bearing Area Model) belonging to a DMT class of models. In one case, we use the GJP (Generalized Johnson Parameter) model, which is an empirical fit validated on the same (and so far mos… ▽ More In the present short note, we attempt further validations and comparisons of a recent simple model for the estimate for adhesion between elastic (hard) rough solids with Gaussian multiple scales of roughness, BAM (Bearing Area Model) belonging to a DMT class of models. In one case, we use the GJP (Generalized Johnson Parameter) model, which is an empirical fit validated on the same (and so far most extensive) set of data on which BAM was validated, namely that of Pastewka and Robbins. In the second case, we compare with another approximate DMT theory, that of Persson and Scaraggi, which turns out extremely close to the BAM model, despite much more complex: GJP however can lead to significant discrepancies. △ Less

Submitted 2 January, 2018; originally announced January 2018.

Comments: 12 pages

Ultrastrong adhesion in the contact with thin elastic layers on a rigid foundation

Authors: M. Ciavarella, A. Papangelo

Abstract: In the present short note, we generalize simple approximate Johnson-Jaffar-Barber solutions for the indentation by a rigid punch of a thin elastic layer on a rigid foundation to the case of adhesion. This could be an interesting geometry for an adhesive system, a limit case of the more general class of layered systems, or FGMs (Functionally Graded Materials). We show that ultrastrong adhesion (up… ▽ More In the present short note, we generalize simple approximate Johnson-Jaffar-Barber solutions for the indentation by a rigid punch of a thin elastic layer on a rigid foundation to the case of adhesion. This could be an interesting geometry for an adhesive system, a limit case of the more general class of layered systems, or FGMs (Functionally Graded Materials). We show that ultrastrong adhesion (up to theoretical strength) can be reached both in line contact or in axisymmetric contact for thin layers (typically of nanoscale size), which suggests a new possible strategy for "optimal adhesion". In particular, in line contact adhesion enhancement occurs as an increase of the actual pull-off force, while in axisymmetric case the latter is apparently very close to the classical JKR case. However, it appears in closer examination that also for axisymmetric case, the enhancement occurs by reducing the size of contact needed to sustain the pull-off force. These effects are further enhanced by Poisson's ratio effects in the case of nearly incompressible layer. △ Less

Submitted 2 January, 2018; originally announced January 2018.

Comments: 14 pages, 3 figures

A JKR solution for a ball-in-socket contact geometry as a bi-stable adhesive system

Authors: M. Ciavarella

Abstract: In the present note, we start by observing that in the classical JKR theory of adhesion, using the usual Hertzian approximations, the pull-off load grows unbounded when the clearance goes to zero in a conformal "ball in socket" geometry. To consider the case of the conforming geometry, we use a recent rigorous general extension of the original JKR energetic derivation proposed by the first author… ▽ More In the present note, we start by observing that in the classical JKR theory of adhesion, using the usual Hertzian approximations, the pull-off load grows unbounded when the clearance goes to zero in a conformal "ball in socket" geometry. To consider the case of the conforming geometry, we use a recent rigorous general extension of the original JKR energetic derivation proposed by the first author which necessitates only of adhesionless solutions, and an approximate adhesionless solution given in the literature. We find that depending on a single governing parameter of the problem, theta=DeltaR/(2 pi w R E*) where E* is the plane strain elastic modulus of the material couple, w the surface energy, DeltaR the clearance and R the radius of the sphere, the system shows the classical bistable behaviour for a single sinusoid or a dimpled surface: pull off is approximately that of the JKR theory for theta>0.82 only if the system is not "pushed" strongly enough and otherwise a "strong adhesion" regime is found. Below this value theta<0.82, a strong spontaneous adhesion regime is found similar to "full contact". From the strong regime, pull-off will require a separate investigation depending on the actual system at hand. △ Less

Submitted 27 December, 2017; originally announced December 2017.

Comments: 13 pages, 5 figures

An approximate JKR solution for a general contact, including rough contacts

Authors: M. Ciavarella

Abstract: In the present note, we suggest a simple closed form approximate solution to the adhesive contact problem under the so-called JKR regime. The derivation is based on generalizing the original JKR energetic derivation assuming calculation of the strain energy in adhesiveless contact, and unloading at constant contact area. The underlying assumption is that the contact area distributions are the same… ▽ More In the present note, we suggest a simple closed form approximate solution to the adhesive contact problem under the so-called JKR regime. The derivation is based on generalizing the original JKR energetic derivation assuming calculation of the strain energy in adhesiveless contact, and unloading at constant contact area. The underlying assumption is that the contact area distributions are the same as under adhesiveless conditions (for an appropriately increased normal load), so that in general the stress intensity factors will not be exactly equal at all contact edges. The solution is simply that the indentation is D=D1-Sqrt(2w A'/P") where w is surface energy, D1 is the adhesiveless indentation, A' is the first derivative of contact area and P" the second derivative of the load with respect to indentation. The solution only requires macroscopic quantities, and not very elaborate local distributions, and is exact in many configurations like axisymmetric contacts. It permits also an estimate of the full solution for elastic rough solids with Gaussian multiple scales of roughness, which so far was lacking, using known adhesiveless simple results. The solution turns out to depend only on rms amplitude and slopes of the surface, and in the fractal limit, slopes would grow without limit, tends to the adhesiveless result - although in this limit the JKR model is inappropriate. However, a more solid result is that the solution would also go to adhesiveless result for large rms amplitude of roughness h_{rms}, irrespective of the small scale details, and in agreement with common sense and previous models by the author. △ Less

Submitted 27 December, 2017; v1 submitted 15 December, 2017; originally announced December 2017.

Comments: 14 pages

On the use of DMT approximations in adhesive contacts, with remarks on random rough contacts

Authors: Michele Ciavarella

Abstract: The contact between rough surfaces with adhesion is an extremely difficult problem, and the approximation of the DMT theory (to neglect deformations due to attractive forces), originally developed for spherical contact of very small radius, are receiving some new interest. The DMT approximation leads to extremely large overestimate of the adhesive forces in the case of spherical contact, except at… ▽ More The contact between rough surfaces with adhesion is an extremely difficult problem, and the approximation of the DMT theory (to neglect deformations due to attractive forces), originally developed for spherical contact of very small radius, are receiving some new interest. The DMT approximation leads to extremely large overestimate of the adhesive forces in the case of spherical contact, except at pull-off. For cylindrical contact, the opposite trend is found for larger contact areas. These findings suggest some caution in solving rough contacts with DMT models, unless the Tabor parameter is really low. Further approximate models like that of Pastewka & Robbins' may be explained to work only for a coincidence of error cancellation in their range of parameters. △ Less

Submitted 16 January, 2017; originally announced January 2017.

Comments: 11 pages, 5 figures

Adhesion of surfaces with wavy roughness and a shallow depression

Authors: Michele Ciavarella, Antonio Papangelo

Abstract: Recently, a simple and elegant "dimple" model was introduced by McMeeking et al. (Adv Eng Mat 12(5), 389-397, 2010) to show a mechanism for a bistable adhesive system involving a surface with a shallow depression. The system shows, at least for intermediate levels of stickiness, that external pressure can switch the system into a "strong adhesive" regime of full contact, or into weak adhesion and… ▽ More Recently, a simple and elegant "dimple" model was introduced by McMeeking et al. (Adv Eng Mat 12(5), 389-397, 2010) to show a mechanism for a bistable adhesive system involving a surface with a shallow depression. The system shows, at least for intermediate levels of stickiness, that external pressure can switch the system into a "strong adhesive" regime of full contact, or into weak adhesion and complete pull-off, similarly to the contact of surfaces with a single scale of periodical waviness. We add to this model the effect of roughness, in the simple form of axisymmetric single scale of waviness, permitting a very detailed study, and we show that this induces a resistance to jum** into full contact on one hand (limiting the "strong adhesion" regime), and an enhancement of pull-off and of hysteresis starting from the partial contact state on the other (enhancing the "weak adhesion" regime). We show the system depends only on two dimensionless parameters, depending on the ratio of work of adhesion to the energy to flatten the dimple or waviness, respectively. The system becomes pressure-sensitive also in the intermediate states, as it is observed in real adhesive rough systems. The model obviously is specular to the Guduru model of rough spheres (Guduru, JMPS, 55, 473--488, 2007), with which it shares the limitations of the analysis assuming a connected contact (crack) area, and serves also the purpose of showing the effect of a depression into an otherwise periodic rough contact, towards the understanding of adhesion with multiple scales of roughness. △ Less

Submitted 14 January, 2017; originally announced January 2017.

Comments: 17 pages

A simplified version of Persson's multiscale theory for rubber friction due to viscoelastic losses

Authors: Michele Ciavarella

Abstract: We show the full multiscale Persson's theory for rubber friction due to viscoelastic losses can be approximated extremely closely to simpler models, like that suggested by Persson in 1998 and similarly by Popov in his 2010 book (but we don't make any use of the so-called "Method of Dimensionality Reduction"), so it is essentially a single scale model at the so called large wavevector cutoff. The d… ▽ More We show the full multiscale Persson's theory for rubber friction due to viscoelastic losses can be approximated extremely closely to simpler models, like that suggested by Persson in 1998 and similarly by Popov in his 2010 book (but we don't make any use of the so-called "Method of Dimensionality Reduction"), so it is essentially a single scale model at the so called large wavevector cutoff. The dependence on the entire spectrum of roughness is therefore only confusing, and we confirm this with actual exact calculations and reference to recent Lorenz et al (2015) data. The multiscale aspect is irrelevant with respect to the real critical issue: the choice of the "free parameter" best fit truncation cutoff, which shows the models are mainly fitting equations. In this sense, we provide at least a very simple one. △ Less

Submitted 2 February, 2017; v1 submitted 13 January, 2017; originally announced January 2017.

Comments: This paper contained some crucial errors in then derivation

An upper bound to multiscale roughness-induced adhesion enhancement

Authors: M. Ciavarella

Abstract: Recently Guduru and coworkers have demonstrated with neat theory and experiments that both increase of strength and of toughness are possible in the contact of a rigid sphere with concentric single scale of waviness, against a very soft material. The present note tries to answer the question of a multiscale enhancement of adhesion, considering a Weierstrass series to represent the multiscale rough… ▽ More Recently Guduru and coworkers have demonstrated with neat theory and experiments that both increase of strength and of toughness are possible in the contact of a rigid sphere with concentric single scale of waviness, against a very soft material. The present note tries to answer the question of a multiscale enhancement of adhesion, considering a Weierstrass series to represent the multiscale roughness, and analytical results only are used. It is concluded that the enhancement is bounded for low fractal dimensions but it can happen, and possibly to very high values, whereas it is even unbounded for high fractal dimensions, but it is also much less likely to occur, because of separated contacts. △ Less

Submitted 2 March, 2016; originally announced March 2016.

Comments: 12 pages

On the effect of wear on asperity heigth distributions, and the corresponding effect in the mechanical response

Authors: M. Ciavarella

Abstract: Since the time of the original Greenwood & Williamson paper, it was noticed that abrasion and wear lead to possibly bimodal distribution of asperity height distribution, with the upper tail of asperities following from the characteristics of the process. Using a limit case solution due to Borucki for the wear of an originally Gaussian distribution, it is shown here that the tail is indeed always G… ▽ More Since the time of the original Greenwood & Williamson paper, it was noticed that abrasion and wear lead to possibly bimodal distribution of asperity height distribution, with the upper tail of asperities following from the characteristics of the process. Using a limit case solution due to Borucki for the wear of an originally Gaussian distribution, it is shown here that the tail is indeed always Gaussian, but with different equivalent parameters. Therefore, if the wear process is light, one obtains a bimodal distribution and both may affect the resulting contact mechanics behaviour. In this short note, we illustrate just the main features of the problem. We conclude that it is an oversimplification to consider surfaces Gaussian. △ Less

Submitted 1 March, 2016; originally announced March 2016.

Comments: 8 pages

On the significance of asperity models predictions of rough contact with respect to recent alternative theories

Authors: M. Ciavarella

Abstract: Recently, it has been shown that while asperity models show correctly qualitative features of rough contact problems (linearity in area-load, negative exponential dependence of load on separation which means also linearity of stiffness with load), the exact value of the coefficients are not precise for the idealized case of Gaussian distribution of heigths. This is due to the intrinsic simplificat… ▽ More Recently, it has been shown that while asperity models show correctly qualitative features of rough contact problems (linearity in area-load, negative exponential dependence of load on separation which means also linearity of stiffness with load), the exact value of the coefficients are not precise for the idealized case of Gaussian distribution of heigths. This is due to the intrinsic simplifications, neglecting asperity coalescence and interaction effects. However, the issue of Gaussianity has not been proved or experimentally verified in many cases, and here we show that, for example, assuming a Weibull distribution of asperity heigths, the area-load linear coefficient is not much affected, while the relationships load-separation and therefore also stiffness-load do change largely, particularly when considering bounded distributions of asperity heigths. It is suggested that Gaussianity of surfaces should be further tested in experiments, before applying the most sophisticated rough contact models based on the Gaussian assumption. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Comments: 9 pages

On roughness-induced adhesion enhancement

Authors: M. Ciavarella

Abstract: While adhesion reduction due to roughness is not surprising, roughness induced adhesion remained a puzzle until recently Guduru and coworkers have shown a very convincing mechanism to explain both the increase of strength and of toughness in a sphere with concentric single scale of waviness. Kesari and coworkers have later shown some very elegant convenient asymptotic expansion of Guduru's solutio… ▽ More While adhesion reduction due to roughness is not surprising, roughness induced adhesion remained a puzzle until recently Guduru and coworkers have shown a very convincing mechanism to explain both the increase of strength and of toughness in a sphere with concentric single scale of waviness. Kesari and coworkers have later shown some very elegant convenient asymptotic expansion of Guduru's solution. This enhancement is very high and indeed, using Kesari's solution, it is here shown to depend uniquely on a Johnson parameter for adhesion of a sinusoidal contact. However, counterintuitively, it leads to unbounded enhancement for conditions of large roughness for which Johnson parameter is very low. Guduru postulated that this enhancement should occur after sufficiently large pressure has been applied to any spherical contact. Also, that although the enhancement is limited to the JKR regime of large soft materials with high adhesion, the DMT limit for the smooth sphere is found otherwise. However, for hard materials, even the DMT limit for the smooth solids is very hard to observe, which suggest that also adhesion reduction is yet not well understood. The limitations of the assumption of simply connected area is here further discussed, and a well known model for hard particles in contact with rough planes due to Rumpf is used to show that in the range where unbounded increase is predicted, orders of magnitude reduction is instead expected for rigid solids. We suggest that Guduru's model may be close to an upper bound to adhesion of rough bodies, while the Rumpf-Rabinovich model may be close to a lower bound. △ Less

Submitted 19 February, 2016; originally announced February 2016.

Comments: 8 pages

On a recent very simple generalization of DMT theory of adhesion

Authors: M. Ciavarella

Abstract: As the interest in adhesion is shifting towards smaller and smaller scales, the well known Tabor adhesion parameter decreases and the DMT theory is frequently considered to be the appropriate limit. A very attractive much simplified version of DMT has been proposed in a recent investigation of rough contacts by Pastewka & Robbins (PNAS, 111(9), 3298-3303, 2014) which seems to work in very general… ▽ More As the interest in adhesion is shifting towards smaller and smaller scales, the well known Tabor adhesion parameter decreases and the DMT theory is frequently considered to be the appropriate limit. A very attractive much simplified version of DMT has been proposed in a recent investigation of rough contacts by Pastewka & Robbins (PNAS, 111(9), 3298-3303, 2014) which seems to work in very general conditions in numerical experiments. However, when comparing this calculation to the known theories for the sphere, surprisingly large conflicts occur, and the reason for the success of the numerical experiments is obscure. △ Less

Submitted 10 February, 2016; originally announced February 2016.

Comments: 8 pages

A note on the possibility of roughness enhancement of adhesion in Persson's theory

Authors: M. Ciavarella

Abstract: In an attempt to model the observed enhancement of adhesion in some classical experiments in the 1970-1980's, Persson introduced in his theory of adhesion between rough solids a term which corresponds to an area increase due to roughness. In the old experiments, the adhesion enhancement was shown to be up to one order of magnitude, whereas the area increase could not be defined quantitatively beca… ▽ More In an attempt to model the observed enhancement of adhesion in some classical experiments in the 1970-1980's, Persson introduced in his theory of adhesion between rough solids a term which corresponds to an area increase due to roughness. In the old experiments, the adhesion enhancement was shown to be up to one order of magnitude, whereas the area increase could not be defined quantitatively because of possibly multiscale roughness. However, in more recent studies by Guduru and collaborators, this enhancement has been further explained with classical Linear Elastic Fracture Mechanics theory, the area enhancement has been shown to be negligible, and therefore the problem of adhesion of rough surfaces remains qualitatively and quantitatively unsolved by Persson's theory. △ Less

Submitted 8 February, 2016; originally announced February 2016.

Comments: 7 pages

On Pastewka & Robbins' criterion for macroscopic adhesion of rough surfaces

Authors: M. Ciavarella

Abstract: Pastewka & Robbins (PNAS, 111(9), 3298-3303, 2014) recently have proposed a criterion to distinguish when two surfaces will stick together or not, and suggested it shows a large conflict with asperity theories. It is found that their criterion corresponds very closely to the Fuller and Tabor asperity model one when bandwidth α is small, but otherwise involves a rms ampliture of roughness reduced b… ▽ More Pastewka & Robbins (PNAS, 111(9), 3298-3303, 2014) recently have proposed a criterion to distinguish when two surfaces will stick together or not, and suggested it shows a large conflict with asperity theories. It is found that their criterion corresponds very closely to the Fuller and Tabor asperity model one when bandwidth α is small, but otherwise involves a rms ampliture of roughness reduced by a factor Sqrt(α). Therefore, it implies the stickiness of any rough surface is the same as that of the surface where practically all wavelength components of roughness are removed except the very fine ones, which is perhaps counterintuitive. The results are therefore very interesting, if confirmed. Possible sources of approximations are indicated, and a significant error is found in plotting the pull-off data which may improve the fit with Fuller and Tabor. However, still they show finite pull-off values in cases where both their own criterion and an asperity based one seem to suggest non stickiness, and the results are in these respects inconclusive. △ Less

Submitted 8 February, 2016; originally announced February 2016.

Comments: 8 pages, 2 figures

A random process asperity model for adhesion

Authors: M. Ciavarella

Abstract: A simple asperity model using random process theory is developed in the presence of adhesion. Using the DMT model for each individual asperity, and asymptotic results at large separations, a new adhesion parameter is found, on which the model depends, namely $θ=\frac{w}{E^{\ast}\sqrt{m_{2}/π} m_{0}^{1/2}}$, where $w,E^{\ast},m_{2},m_{0}$ are respectively surface energy, combined elastic modulus, v… ▽ More A simple asperity model using random process theory is developed in the presence of adhesion. Using the DMT model for each individual asperity, and asymptotic results at large separations, a new adhesion parameter is found, on which the model depends, namely $θ=\frac{w}{E^{\ast}\sqrt{m_{2}/π} m_{0}^{1/2}}$, where $w,E^{\ast},m_{2},m_{0}$ are respectively surface energy, combined elastic modulus, variance of slopes and of heigths of the asperities. This parameter perhaps improves the previous parameter proposed by Fuller and Tabor which assumed identical asperities. the effects of adhesion are found in practice only for θ>0.15. Some implications are discussed and comparisons with recent results are attempted. △ Less

Submitted 7 July, 2016; v1 submitted 12 January, 2016; originally announced January 2016.

Comments: This paper has been withdrawn by the author because a new version of the theory is under development, to avoid future conflicts

Fracture Mechanics implications for apparent static friction coefficient in contact problems involving slip-weakening laws

Authors: A. Papangelo, M. Ciavarella, J. R. Barber

Abstract: We consider the effect of differing coefficients of static and dynamic friction coefficients on the behaviour of contacts involving microslip. The classic solutions of Cattaneo and Mindlin are unchanged if the transition in coefficients is abrupt, but if it occurs over some small slip distance, the solution has some mathematical similarities with those governing the normal tractions in adhesive co… ▽ More We consider the effect of differing coefficients of static and dynamic friction coefficients on the behaviour of contacts involving microslip. The classic solutions of Cattaneo and Mindlin are unchanged if the transition in coefficients is abrupt, but if it occurs over some small slip distance, the solution has some mathematical similarities with those governing the normal tractions in adhesive contact problems. In particular, if the transition to dynamic slip occurs over a sufficiently small area, we can identify a `JKR' approximation, where the transition region is condensed to a line. A local singularity in shear traction is then predicted, with a stress-intensity factor that is proportional to the the square root of the local contact pressure and to a certain integral of the friction coefficient-slip distance relation. We can also define an equivalent of the `small-scale yielding' criterion, which enables us to assess when the singular solution provides a good approximation. One consequence of the results is that the static coefficient of friction determined from force measurements in experiments is significantly smaller than the value that holds at the microscale. △ Less

Submitted 19 June, 2015; originally announced June 2015.

Comments: 6 figures

Adhesive rough contacts near complete contact

Authors: M. Ciavarella

Abstract: Recently, there has been some debate over the effect of adhesion on the contact of rough surfaces. Classical asperity theories predict, in agreement with experimental observations, that adhesion is always destroyed by roughness except if the amplitude of the same is extremely small, and the materials are particularly soft. This happens for all fractal dimensions. However, these theories are limite… ▽ More Recently, there has been some debate over the effect of adhesion on the contact of rough surfaces. Classical asperity theories predict, in agreement with experimental observations, that adhesion is always destroyed by roughness except if the amplitude of the same is extremely small, and the materials are particularly soft. This happens for all fractal dimensions. However, these theories are limited due to the geometrical simplification, which may be particularly strong in conditions near full contact. We introduce therefore a simple model for adhesion, which aims at being rigorous near full contact, where we postulate there are only small isolated gaps between the two bodies. The gaps can be considered as "pressurized cracks" by using Ken Johnson's idea of searching a corrective solution to the full contact solution. The solution is an extension of the adhesive-less solution proposed recently by Xu, Jackson, and Marghitu (XJM model) (2014). This process seems to confirm recent theories using the JKR theory, namely that the effect of adhesion depends critically on the fractal dimension. For D<2.5, the case which includes the vast majority of natural surfaces, there is an expected strong effect of adhesion. Only for large fractal dimensions, D>2.5, seems for large enough magnifications that a full fractal roughness completely destroys adhesion. These results are partly paradoxical since strong adhesion is not observed in nature except in special cases. A possible way out of the paradox may be that the conclusion is relevant for the near full contact regime, where the strong role of flaws at the interfaces, and of gaps full of contaminant, trapped air or liquid in pressure, needs to be further explored. If conditions near full contact are not achieved on loading, probably the conclusions of classical asperity theories may be confirmed. △ Less

Submitted 1 May, 2015; v1 submitted 30 April, 2015; originally announced April 2015.

Comments: 22 pages, 5 figures

JKR solution for an anisotropic half space

Authors: J. R. Barber, M. Ciavarella

Abstract: In this paper, the classical JKR theory of the adhesive contact of isotropic elastic spheres is extended to consider the effect of anisotropic elasticity. The contact area will then generally be non-circular, but in many cases it can reasonably be approximated by an ellipse whose dimensions are determined by imposing the energy release rate criterion at the ends of the major and minor axes. Analyt… ▽ More In this paper, the classical JKR theory of the adhesive contact of isotropic elastic spheres is extended to consider the effect of anisotropic elasticity. The contact area will then generally be non-circular, but in many cases it can reasonably be approximated by an ellipse whose dimensions are determined by imposing the energy release rate criterion at the ends of the major and minor axes. Analytical expressions are obtained for the relations between the contact force, the normal displacement and the ellipse semi-axes. It is found that the eccentricity of the contact area decreases during tensile loading and for cases when the point load solution can be accurately described by only one Fourier term, it is almost circular at pull-off, permitting an exact closed form solution for this case. As in the isotropic JKR solution, the pull-off force is independent of the mean elastic modulus, but we find that anisotropy increases the pull-off force and this effect can be quite significant. △ Less

Submitted 10 December, 2013; originally announced December 2013.

A critical assessment on Kassapoglou's statistical model for composites fatigue

Authors: M. Ciavarella, V. Vinogradov, G. Carbone

Abstract: Kassapoglou recently proposed a model for fatigue of composite materials which seems to suggest that fatigue SN curve can be entirely predicted on the basis of the statistical distribution of static strengths. The original abstract writes "Expressions for the cycles to failure as a function of R ratio are derived. These expressions do not require any curve fitting and do not involve any experiment… ▽ More Kassapoglou recently proposed a model for fatigue of composite materials which seems to suggest that fatigue SN curve can be entirely predicted on the basis of the statistical distribution of static strengths. The original abstract writes "Expressions for the cycles to failure as a function of R ratio are derived. These expressions do not require any curve fitting and do not involve any experimentally determined parameters. The fatigue predictions do not require any fatigue tests for calibration". These surprisingly ambitious claims and attractive results deserve careful scrutiny. We contend that the results seem to be due to a number of approximations and incorrect derivations, and one particular misleading assumption, which make the model not conform to a fatigue testing in a given specimen with resulting SN curve distribution. The quantitative agreement of some predictions (the scatter of distribution of fatigue lives being close to the mode value found in typical composites of aeronautical interest in the large Navy database) should not motivate any enthusiasm. It is believed that a proper statistical treatment of the fatigue process should not make wear-out constants disappear, and hence the SN curves would depend on them, and not just on scatter of static data. These serious concerns explain the large discrepancies found by 3 independent studies which tried to apply Kassapoglou's model to composite fatigue data, and to other well known results. △ Less

Submitted 5 October, 2013; originally announced October 2013.

Comments: 3 figures

Towards an analogue of Ihara's lemma for Shimura curves

Authors: Miriam Ciavarella, Lea Terracini

Abstract: The object of this work is to present the status of art of an open problem: to provide an analogue for Shimura curves of the Ihara's lemma \cite{Ihara73} which holds for modular curves. We will describe our direct result towards the "Problem of Ihara" and we will present some possible approaches to it, giving a formulation of our conjecture in terms of congruence subgroup problem for quaternion… ▽ More The object of this work is to present the status of art of an open problem: to provide an analogue for Shimura curves of the Ihara's lemma \cite{Ihara73} which holds for modular curves. We will describe our direct result towards the "Problem of Ihara" and we will present some possible approaches to it, giving a formulation of our conjecture in terms of congruence subgroup problem for quaternion algebras. Since some modular forms can be reinterpreted as elements of the cohomology of Shimura curves, we will describe a consequence of the "Problem of Ihara" about congruence modules of modular forms and a consequence of it about the problem of raising the level of modular forms. △ Less

Submitted 4 January, 2010; v1 submitted 5 February, 2008; originally announced February 2008.

Some explicit constructions of integral structures in quaternion algebras

Authors: Miriam Ciavarella, Lea Terracini

Abstract: Let B be an undefined quaternion algebra over Q. Following the explicit chacterization of some Eichler orders in B given by Hashimoto, we define explicit embeddings of these orders in some local rings of matrices; we describe the two natural inclusions of an Eichler order of leven Nq in an Eichler order of level N. Moreover we provide a basis for a chain of Eichler orders in B and prove results… ▽ More Let B be an undefined quaternion algebra over Q. Following the explicit chacterization of some Eichler orders in B given by Hashimoto, we define explicit embeddings of these orders in some local rings of matrices; we describe the two natural inclusions of an Eichler order of leven Nq in an Eichler order of level N. Moreover we provide a basis for a chain of Eichler orders in B and prove results about their intersection. △ Less

Submitted 16 January, 2008; v1 submitted 14 January, 2008; originally announced January 2008.

MSC Class: 11R52

Congruences between modular forms and related modules

Authors: Miriam Ciavarella

Abstract: We fix $\ell$ a prime and let $M$ be an integer such that $\ell\not|M$; let $f\in S_2(Γ_1(M\ell^2))$ be a newform supercuspidal of fixed type related to the nebentypus, at $\ell$ and special at a finite set of primes. Let $\TT^ψ$ be the local quaternionic Hecke algebra associated to $f$. The algebra $\TT^ψ$ acts on a module $\mathcal M^ψ_f$ coming from the cohomology of a Shimura curve. Applying… ▽ More We fix $\ell$ a prime and let $M$ be an integer such that $\ell\not|M$; let $f\in S_2(Γ_1(M\ell^2))$ be a newform supercuspidal of fixed type related to the nebentypus, at $\ell$ and special at a finite set of primes. Let $\TT^ψ$ be the local quaternionic Hecke algebra associated to $f$. The algebra $\TT^ψ$ acts on a module $\mathcal M^ψ_f$ coming from the cohomology of a Shimura curve. Applying the Taylor-Wiles criterion and a recent Savitt's theorem, $\TT^ψ$ is the universal deformation ring of a global Galois deformation problem associated to $\orho_f$. Moreover $\mathcal M^ψ_f$ is free of rank 2 over $\TT^ψ$. If $f$ occurs at minimal level, by a generalization of a Conrad, Diamond and Taylor's result and by the classical Ihara's lemma, we prove a theorem of raising the level and a result about congruence ideals. The extension of this results to the non minimal case is an open problem. △ Less

Submitted 25 October, 2007; originally announced October 2007.

MSC Class: 11F80