-
2 to 16 GHz Fundamental Symmetric Mode Acoustic Resonators in Piezoelectric Thin-Film Lithium Niobate
Authors:
Vakhtang Chulukhadze,
Jack Kramer,
Tzu-Hsuan Hsu,
Omar Barrera,
Ian Anderson,
Sinwoo Cho,
Joshua Campbell,
Ruochen Lu
Abstract:
As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode en…
▽ More
As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode enable monolithic multi-frequency fabrication, transversal filters, correlators, and other compact signal processing components. In this work, we present thin-film lithium niobate (LN) S0 resonators scaled up to 16 GHz. Specifically, we study the characteristics of the S0 mode as the wavelength is minimized and showcase a device at 14.9 GHz with a Bode Q maximum of 391, a k2 of 6%, and a figure of merit (FoM) of 23.33, surpassing the state-of-the-art (SoA) in its frequency range.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Experimental Study of Periodically Poled Piezoelectric Film Lithium Niobate Resonator at Cryogenic Temperatures
Authors:
Jack Kramer,
Omar Barrera,
Sinwoo Cho,
Vakhtang Chulukhadze,
Tzu-Hsuan Hsu,
Ruochen Lu
Abstract:
This work reports the first study of periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) resonators at cryogenic temperatures. We experimentally investigate the temperature dependency of resonant frequencies and quality factor (Q) of higher-order Lamb modes up to 20 GHz between 80°K and 297°K, using a tri-layer P3F LiNbO3 resonators as the experimental platform. The supported thic…
▽ More
This work reports the first study of periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) resonators at cryogenic temperatures. We experimentally investigate the temperature dependency of resonant frequencies and quality factor (Q) of higher-order Lamb modes up to 20 GHz between 80°K and 297°K, using a tri-layer P3F LiNbO3 resonators as the experimental platform. The supported thickness-shear Lamb modes between second-order symmetric (S2) and eleventh-order antisymmetric (A11) modes show temperature coefficients of frequency (TCF) averaging -68.8 ppm/K. Higher Q and more pronounced spurious modes are observed at lower temperatures for many modes. Upon further study, the cryogenic study will be crucial for identifying dominant loss mechanisms and origins of spurious modes in higher-order Lamb wave devices for millimeter-wave applications.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
23.8-GHz Acoustic Filter in Periodically Poled Piezoelectric Film Lithium Niobate With 1.52-dB IL and 19.4% FBW
Authors:
Sinwoo Cho,
Omar Barrera,
Jack Kramer,
Vakhtang Chulukhadze,
Tzu-Hsuan Hsu,
Joshua Campbell,
Ian Anderson,
Ruochen Lu
Abstract:
This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y…
▽ More
This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y-cut LiNbO3 thin film, operating in second-order symmetric (S2) Lamb mode. The record-breaking performance is enabled by the P3F LiNbO3 platform, where piezoelectric thin films of alternating orientations are transferred subsequently, facilitating efficient higher-order Lamb mode operation with simultaneously high quality factor (Q) and coupling coefficient (k2) at millimeter-wave (mmWave). Also, the multi-layer P3F stack promises smaller footprints and better nonlinearity than single-layer counterparts, thanks to the higher capacitance density and lower thermal resistance. Upon further development, the reported P3F LiNbO3 platform is promising for compact filters at mmWave.
△ Less
Submitted 28 June, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
Millimeter Wave Thin-Film Bulk Acoustic Resonator in Sputtered Scandium Aluminum Nitride Using Platinum Electrodes
Authors:
Sinwoo Cho,
Omar Barrera,
Pietro Simeoni,
Ellie Y. Wang,
Jack Kramer,
Vakhtang Chulukhadze,
Joshua Campbell,
Matteo Rinaldi,
Ruochen Lu
Abstract:
This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at millimeter wave (mmWave) with high quality factor (Q) using platinum (Pt) electrodes. FBARs with combinations of Pt and aluminum (Al) electrodes, i.e., Al top Al bottom, Pt top Al bottom, Al top Pt bottom, and Pt top Pt bottom, are built to study the impact of electrodes on mmWave FBARs. Th…
▽ More
This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at millimeter wave (mmWave) with high quality factor (Q) using platinum (Pt) electrodes. FBARs with combinations of Pt and aluminum (Al) electrodes, i.e., Al top Al bottom, Pt top Al bottom, Al top Pt bottom, and Pt top Pt bottom, are built to study the impact of electrodes on mmWave FBARs. The demonstrated FBAR with Pt top and bottom electrodes achieve electromechanical coupling (k2) of 4.0% and Q of 116 for the first-order symmetric (S1) mode at 13.7 GHz, and k2 of 1.8% and Q of 94 for third-order symmetric (S3) mode at 61.6 GHz. Through these results, we confirmed that even in the frequency band of approximately 60 GHz, ScAlN FBAR can achieve a Q factor approaching 100 with optimized fabrication and acoustic/EM design. Further development calls for stacks with better quality in piezoelectric and metallic layers.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Transferred Thin Film Lithium Niobate as Millimeter Wave Acoustic Filter Platforms
Authors:
Omar Barrera,
Sinwoo Cho,
Kenny Hyunh,
Jack Kramer,
Michael Liao,
Vakhtang Chulukhadze,
Lezli Matto,
Mark S. Goorsky,
Ruochen Lu
Abstract:
This paper reports the first high-performance acoustic filters toward millimeter wave (mmWave) bands using transferred single-crystal thin film lithium niobate (LiNbO3). By transferring LiNbO3 on the top of silicon (Si) and sapphire (Al2O3) substrates with an intermediate amorphous Si (aSi) bonding and sacrificial layer, we demonstrate compact acoustic filters with record-breaking performance beyo…
▽ More
This paper reports the first high-performance acoustic filters toward millimeter wave (mmWave) bands using transferred single-crystal thin film lithium niobate (LiNbO3). By transferring LiNbO3 on the top of silicon (Si) and sapphire (Al2O3) substrates with an intermediate amorphous Si (aSi) bonding and sacrificial layer, we demonstrate compact acoustic filters with record-breaking performance beyond 20 GHz. In the LN-aSi-Al2O3 platform, the third-order ladder filter exhibits low insertion loss (IL) of 1.62 dB and 3-dB fractional bandwidth (FBW) of 19.8% at 22.1 GHz, while in the LN-aSi-Si platform, the filter shows low IL of 2.38 dB and FBW of 18.2% at 23.5 GHz. Material analysis validates the great crystalline quality of the stacks. The high-resolution x-ray diffraction (HRXRD) shows full width half maximum (FWHM) of 53 arcsec for Al2O3 and 206 arcsec for Si, both remarkably low compared to piezoelectric thin films of similar thickness. The reported results bring the state-of-the-art (SoA) of compact acoustic filters to much higher frequencies, and highlight transferred LiNbO3 as promising platforms for mmWave filters in future wireless front ends.
△ Less
Submitted 21 November, 2023;
originally announced November 2023.
-
38.7 GHz Thin Film Lithium Niobate Acoustic Filter
Authors:
Omar Barrera,
Sinwoo Cho,
Jack Kramer,
Vakhtang Chulukhadze,
Joshua Campbell,
Ruochen Lu
Abstract:
In this work, a 38.7 GHz acoustic wave ladder filter exhibiting insertion loss (IL) of 5.63 dB and 3-dB fractional bandwidth (FBW) of 17.6% is demonstrated, pushing the frequency limits of thin-film piezoelectric acoustic filter technology. The filter achieves operating frequency up to 5G millimeter wave (mmWave) frequency range 2 (FR2) bands, by thinning thin-film LiNbO3 resonators to sub-50 nm t…
▽ More
In this work, a 38.7 GHz acoustic wave ladder filter exhibiting insertion loss (IL) of 5.63 dB and 3-dB fractional bandwidth (FBW) of 17.6% is demonstrated, pushing the frequency limits of thin-film piezoelectric acoustic filter technology. The filter achieves operating frequency up to 5G millimeter wave (mmWave) frequency range 2 (FR2) bands, by thinning thin-film LiNbO3 resonators to sub-50 nm thickness. The high electromechanical coupling (k2) and quality factor (Q) of first-order antisymmetric (A1) mode resonators in 128 Y-cut lithium niobate (LiNbO3) collectively enable the first acoustic filters at mmWave. The key design consideration of electromagnetic (EM) resonances in interdigitated transducers (IDT) is addressed and mitigated. These results indicate that thin-film piezoelectric resonators could be pushed to 5G FR2 bands. Further performance enhancement and frequency scaling calls for better resonator technologies and EM-acoustic filter co-design.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Fundamental Antisymmetric Mode Acoustic Resonator in Periodically Poled Piezoelectric Film Lithium Niobate
Authors:
Omar Barrera,
Jack Kramer,
Ryan Tetro,
Sinwoo Cho,
Vakhtang Chulukhadze,
Luca Colombo,
Ruochen Lu
Abstract:
Radio frequency (RF) acoustic resonators have long been used for signal processing and sensing. Devices that integrate acoustic resonators benefit from their slow phase velocity (vp), in the order of 3 to 10 km/s, which allows miniaturization of the device. Regarding the subject of small form factor, acoustic resonators that operate at the so-called fundamental antisymmetric mode (A0), feature eve…
▽ More
Radio frequency (RF) acoustic resonators have long been used for signal processing and sensing. Devices that integrate acoustic resonators benefit from their slow phase velocity (vp), in the order of 3 to 10 km/s, which allows miniaturization of the device. Regarding the subject of small form factor, acoustic resonators that operate at the so-called fundamental antisymmetric mode (A0), feature even slower vp (1 to 3 km/s), which allows for smaller devices. This work reports the design and fabrication of A0 mode resonators leveraging the advantages of periodically poled piezoelectricity (P3F) lithium niobate, which includes a pair of piezoelectric layers with opposite polarizations to mitigate the charge cancellation arising from opposite stress of A0 in the top and bottom piezoelectric layers. The fabricated device shows a quality factor (Q) of 800 and an electromechanical coupling (k2) of 3.29, resulting in a high figure of merit (FoM, Q times k2) of 26.3 at the resonant frequency of 294 MHz, demonstrating the first efficient A0 device in P3F platforms. The proposed A0 platform could enable miniature signal processing, sensing, and ultrasound transducer applications upon optimization.
△ Less
Submitted 27 August, 2023;
originally announced September 2023.
-
Millimeter Wave Thin-Film Bulk Acoustic Resonator in Sputtered Scandium Aluminum Nitride
Authors:
Sinwoo Cho,
Omar Barrera,
Pietro Simeoni,
Emily N. Marshall,
Jack Kramer,
Keisuke Motoki,
Tzu-Hsuan Hsu,
Vakhtang Chulukhadze,
Matteo Rinaldi,
W. Alan Doolittle,
Ruochen Lu
Abstract:
This work reports a millimeter wave (mmWave) thin-film bulk acoustic resonator (FBAR) in sputtered scandium aluminum nitride (ScAlN). This paper identifies challenges of frequency scaling sputtered ScAlN into mmWave and proposes a stack and new fabrication procedure with a sputtered Sc0.3Al0.7N on Al on Si carrier wafer. The resonator achieves electromechanical coupling (k2) of 7.0% and quality fa…
▽ More
This work reports a millimeter wave (mmWave) thin-film bulk acoustic resonator (FBAR) in sputtered scandium aluminum nitride (ScAlN). This paper identifies challenges of frequency scaling sputtered ScAlN into mmWave and proposes a stack and new fabrication procedure with a sputtered Sc0.3Al0.7N on Al on Si carrier wafer. The resonator achieves electromechanical coupling (k2) of 7.0% and quality factor (Q) of 62 for the first-order symmetric (S1) mode at 21.4 GHz, along with k2 of 4.0% and Q of 19 for the third-order symmetric (S3) mode at 55.4 GHz, showing higher figures of merit (FoM, k2xQ) than reported AlN/ScAlN-based mmWave acoustic resonators. The ScAlN quality is identified by transmission electron microscopy (TEM) and X-ray diffraction (XRD), identifying the bottlenecks in the existing piezoelectric-metal stack. Further improvement of ScAlN/AlN-based mmWave acoustic resonators calls for better crystalline quality from improved thin-film deposition methods.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
Spurious-Free Lithium Niobate Bulk Acoustic Resonator for Piezoelectric Power Conversion
Authors:
Kristi Nguyen,
Eric Stolt,
Weston Braun,
Vakhtang Chulukhadze,
Jeronimo Segovia-Fernandez,
Sombuddha Chakraborty,
Juan Rivas-Davila,
Ruochen Lu
Abstract:
Recently, piezoelectric power conversion has shown great benefits from replacing the bulky and lossy magnetic inductor in a traditional power converter with a piezoelectric resonator due to its compact size and low loss. However, the converter performance is ultimately limited by existing resonator designs, specifically by moderate quality factor (Q), moderate electromechanical coupling (kt2), and…
▽ More
Recently, piezoelectric power conversion has shown great benefits from replacing the bulky and lossy magnetic inductor in a traditional power converter with a piezoelectric resonator due to its compact size and low loss. However, the converter performance is ultimately limited by existing resonator designs, specifically by moderate quality factor (Q), moderate electromechanical coupling (kt2), and spurious modes near resonance. This work reports a spurious-free lithium niobate (LiNbO3) thickness-extensional mode bulk acoustic resonator design, demonstrating Q of 4000 and kt2 of 30% with a fractional suppressed region of 62%. We first propose a novel grounded ring structure for spurious-free resonator design, then validate its performance experimentally. Upon further work, this design could be extended to applications requiring spurious suppression, such as filters, tunable oscillators, transformers, etc.
△ Less
Submitted 26 August, 2023;
originally announced August 2023.
-
Thin-Film Lithium Niobate Acoustic Resonator with High Q of 237 and k2 of 5.1% at 50.74 GHz
Authors:
Jack Kramer,
Vakhtang Chulukhadze,
Kenny Huynh,
Omar Barrera,
Michael Liao,
Sinwoo Cho,
Lezli Matto,
Mark S. Goorsky,
Ruochen Lu
Abstract:
This work reports a 50.74 GHz lithium niobate (LiNbO3) acoustic resonator with a high quality factor (Q) of 237 and an electromechanical coupling (k2) of 5.17% resulting in a figure of merit (FoM, Q x k2) of 12.2. The LiNbO3 resonator employs a novel bilayer periodically poled piezoelectric film (P3F) 128 Y-cut LiNbO3 on amorphous silicon (a-Si) on sapphire stack to achieve low losses and high cou…
▽ More
This work reports a 50.74 GHz lithium niobate (LiNbO3) acoustic resonator with a high quality factor (Q) of 237 and an electromechanical coupling (k2) of 5.17% resulting in a figure of merit (FoM, Q x k2) of 12.2. The LiNbO3 resonator employs a novel bilayer periodically poled piezoelectric film (P3F) 128 Y-cut LiNbO3 on amorphous silicon (a-Si) on sapphire stack to achieve low losses and high coupling at millimeter wave (mm-wave). The device also shows a Q of 159, k2 of 65.06%, and FoM of 103.4 for the 16.99 GHz tone. This result shows promising prospects of P3F LiNbO3 towards mm-wave front-end filters.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Thin-Film Lithium Niobate Acoustic Filter at 23.5 GHz with 2.38 dB IL and 18.2% FBW
Authors:
Omar Barrera,
Sinwoo Cho,
Lezli Matto,
Jack Kramer,
Kenny Huynh,
Vakhtang Chulukhadze,
Yen-Wei Chang,
Mark S. Goorsky,
Ruochen Lu
Abstract:
This work reports an acoustic filter at 23.5 GHz with a low insertion loss (IL) of 2.38 dB and a 3-dB fractional bandwidth (FBW) of 18.2%, significantly surpassing the state-of-the-art. The device leverages electrically coupled acoustic resonators in 100 nm 128° Y-cut lithium niobate (LiNbO3) piezoelectric thin film, operating in the first-order antisymmetric (A1) mode. A new film stack, namely tr…
▽ More
This work reports an acoustic filter at 23.5 GHz with a low insertion loss (IL) of 2.38 dB and a 3-dB fractional bandwidth (FBW) of 18.2%, significantly surpassing the state-of-the-art. The device leverages electrically coupled acoustic resonators in 100 nm 128° Y-cut lithium niobate (LiNbO3) piezoelectric thin film, operating in the first-order antisymmetric (A1) mode. A new film stack, namely transferred thin-film LiNbO3 on silicon (Si) substrate with an intermediate amorphous silicon (a-Si) layer, facilitates the record-breaking performance at millimeter-wave (mmWave). The filter features a compact footprint of 0.56 mm2. In this letter, acoustic and EM consideration, along with material characterization with X-ray diffraction and verified with cross-sectional electron microscopy are reported. Upon further development, the reported filter platform can enable various front-end signal-processing functions at mmWave.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
