-
Upgrading the Submillimeter Array: wSMA and beyond
Authors:
Paul K. Grimes,
Garrett K. Keating,
Raymond Blundell,
Robert D. Christensen,
Mark Gurwell,
Attila Kovacs,
Timothy Norton,
Scott N. Paine,
Ramprasad Rao,
Edward C. -Y. Tong,
Jonathan Weintroub,
David Wilner,
Robert W. Wilson,
Lingzhen Zeng,
Qizhou Zhang
Abstract:
The Submillimeter Array (SMA) is an array of 8 antennas operating at millimeter and submillimeter wavelengths on Maunakea, Hawaii, operated by the Smithsonian Astrophysical Observatory and Academia Sinica Institute of Astronomy and Astrophysics, Taiwan. Over the past several years, we have been preparing a major upgrade to the SMA that will replace the aging original receiver cryostats and receive…
▽ More
The Submillimeter Array (SMA) is an array of 8 antennas operating at millimeter and submillimeter wavelengths on Maunakea, Hawaii, operated by the Smithsonian Astrophysical Observatory and Academia Sinica Institute of Astronomy and Astrophysics, Taiwan. Over the past several years, we have been preparing a major upgrade to the SMA that will replace the aging original receiver cryostats and receiver cartridges with all new cryostats and new 230 and 345 GHz receiver designs. This wideband upgrade (wSMA) will also include significantly increased instantaneous bandwidth, improved sensitivity, and greater capabilities for dual frequency observations. In this paper, we will describe the wSMA receiver upgrade and status, as well as the future upgrades that will be enabled by the deployment of the wSMA receivers.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
The Digital Motion Control System for the Submillimeter Array Antennas
Authors:
T. R. Hunter,
R. W. Wilson,
R. Kimberk,
P. S. Leiker,
N. A. Patel,
R. Blundell,
R. D. Christensen,
A. R. Diven,
J. Maute,
R. J. Plante,
P. Riddle,
K. H. Young
Abstract:
We describe the design and performance of the digital servo and motion control system for the 6-meter diameter parabolic antennas of the Submillimeter Array (SMA) on Mauna Kea, Hawaii. The system is divided into three nested layers operating at a different, appropriate bandwidth. (1) A rack-mounted, real-time Unix system runs the position loop which reads the high resolution azimuth and elevation…
▽ More
We describe the design and performance of the digital servo and motion control system for the 6-meter diameter parabolic antennas of the Submillimeter Array (SMA) on Mauna Kea, Hawaii. The system is divided into three nested layers operating at a different, appropriate bandwidth. (1) A rack-mounted, real-time Unix system runs the position loop which reads the high resolution azimuth and elevation encoders and sends velocity and acceleration commands at 100 Hz to a custom-designed servo control board (SCB). (2) The microcontroller-based SCB reads the motor axis tachometers and implements the velocity loop by sending torque commands to the motor amplifiers at 558 Hz. (3) The motor amplifiers implement the torque loop by monitoring and sending current to the three-phase brushless drive motors at 20 kHz. The velocity loop uses a traditional proportional-integral-derivative (PID) control algorithm, while the position loop uses only a proportional term and implements a command shaper based on the Gauss error function. Calibration factors and software filters are applied to the tachometer feedback prior to the application of the servo gains in the torque computations. All of these parameters are remotely adjustable in software. The three layers of the control system monitor each other and are capable of shutting down the system safely if a failure or anomaly occurs. The Unix system continuously relays antenna status to the central observatory computer via reflective memory. In each antenna, a Palm Vx hand controller displays system status and allows full local control of the drives in an intuitive touchscreen user interface. It can also be connected outside the cabin for convenience during antenna reconfigurations. Excellent tracking performance (0.3 arcsec rms) is achieved with this system. It has been in reliable operation on 8 antennas for over 10 years and has required minimal maintenance.
△ Less
Submitted 18 March, 2013;
originally announced March 2013.
-
Detection of CI in absorption towards PKS 1830-211 with the eSMA
Authors:
Sandrine Bottinelli,
A. Meredith Hughes,
Ewine F. van Dishoeck,
Ken H. Young,
Richard Chamberlin,
Remo P. J. Tilanus,
Mark A. Gurwell,
David J. Wilner,
Huib Jan van Langevelde,
Michiel R. Hogerheijde,
Robert D. Christensen,
Hiroko Shinnaga,
Hiroshige Yoshida
Abstract:
We report the first science observations and results obtained with the "extended" SMA (eSMA), which is composed of the SMA (Submillimeter Array), JCMT (James Clerk Maxwell Telescope) and CSO (Caltech Submillimeter Observatory). Redshifted absorptions at z=0.886 of CI (^3P_1 - ^3P_0) were observed with the eSMA with an angular resolution of 0.55"x0.22" at 1.1 mm toward the southwestern image of t…
▽ More
We report the first science observations and results obtained with the "extended" SMA (eSMA), which is composed of the SMA (Submillimeter Array), JCMT (James Clerk Maxwell Telescope) and CSO (Caltech Submillimeter Observatory). Redshifted absorptions at z=0.886 of CI (^3P_1 - ^3P_0) were observed with the eSMA with an angular resolution of 0.55"x0.22" at 1.1 mm toward the southwestern image of the remarkable lensed quasar PKS 1830-211, but not toward the northeastern component at a separation of ~1". Additionally, SMA observations of CO, 13CO and C18O (all J=4-3) were obtained toward this object: CO was also detected toward the SW component, but none of the isotopologues were. This is the first time [CI] is detected in this object, allowing the first direct determination of relative abundances of neutral atomic carbon to CO in the molecular clouds of a spiral galaxy at z>0.1. The [CI] and CO profiles can be decomposed into two and three velocity components respectively. We derive C/CO column density ratios ranging from <0.5 (representative of dense cores) to ~2.5 (close to translucent clouds values). This could indicate that we are seeing environments with different physical conditions or that we are witnessing chemical evolution of regions where C has not completely been converted into CO.
△ Less
Submitted 24 November, 2008;
originally announced November 2008.
-
The eSMA: description and first results
Authors:
Sandrine Bottinelli,
Ken H. Young,
Richard Chamberlin,
Remo P. J. Tilanus,
Mark A. Gurwell,
Dave J. Wilner,
Hiroko Shinnaga,
Hiroshige Yoshida,
Per Friberg,
Huib Jan van Langevelde,
Ewine F. van Dishoeck,
Michiel R. Hogerheijde,
A. Meredith Hughes,
Robert D. Christensen,
Richard E. Hills,
John S. Richer,
Emily Curtis,
the eSMA commissioning team
Abstract:
The eSMA ("extended SMA") combines the SMA, JCMT and CSO into a single facility, providing enhanced sensitivity and spatial resolution owing to the increased collecting area at the longest baselines. Until ALMA early science observing (2011), the eSMA will be the facility capable of the highest angular resolution observations at 345 GHz. The gain in sensitivity and resolution will bring new insi…
▽ More
The eSMA ("extended SMA") combines the SMA, JCMT and CSO into a single facility, providing enhanced sensitivity and spatial resolution owing to the increased collecting area at the longest baselines. Until ALMA early science observing (2011), the eSMA will be the facility capable of the highest angular resolution observations at 345 GHz. The gain in sensitivity and resolution will bring new insights in a variety of fields, such as protoplanetary/transition disks, high-mass star formation, solar system bodies, nearby and high-z galaxies. Therefore the eSMA is an important facility to prepare the grounds for ALMA and train scientists in the techniques.
Over the last two years, and especially since November 2006, there has been substantial progress toward making the eSMA into a working interferometer. In particular, (i) new 345-GHz receivers, that match the capabilities of the SMA system, were installed at the JCMT and CSO; (ii) numerous tests have been performed for receiver, correlator and baseline calibrations in order to determine and take into account the effects arising from the differences between the three types of antennas; (iii) first fringes at 345 GHz were obtained on August 30 2007, and the array has entered the science-verification stage.
We report on the characteristics of the eSMA and its measured performance at 230 GHz and that expected at 345 GHz. We also present the results of the commissioning and some initial science-verification observations, including the first absorption measurement of the C/CO ratio in a galaxy at z=0.89, located along the line of sight to the lensed quasar PKS1830-211, and on the imaging of the vibrationally excited HCN line towards IRC+10216.
△ Less
Submitted 19 August, 2008;
originally announced August 2008.
-
658 GHz Vibrationally-Excited Water Masers with the Submillimeter Array
Authors:
T. R. Hunter,
K. H. Young,
R. D. Christensen,
M. A. Gurwell
Abstract:
Discovered in 1995 at the Caltech Submillimeter Observatory (CSO), the vibrationally-excited water maser line at 658 GHz (455 micron) is seen in oxygen-rich giant and supergiant stars. Because this maser can be so strong (up to thousands of Janskys), it was very helpful during the commissioning phase of the highest frequency band (620-700 GHz) of the Submillimeter Array (SMA) interferometer. Fro…
▽ More
Discovered in 1995 at the Caltech Submillimeter Observatory (CSO), the vibrationally-excited water maser line at 658 GHz (455 micron) is seen in oxygen-rich giant and supergiant stars. Because this maser can be so strong (up to thousands of Janskys), it was very helpful during the commissioning phase of the highest frequency band (620-700 GHz) of the Submillimeter Array (SMA) interferometer. From late 2002 to early 2006, brief attempts were made to search for emission from additional sources beyond the original CSO survey. These efforts have expanded the source count from 10 to 16. The maser emission appears to be quite compact spatially, as expected from theoretical considerations; thus these objects can potentially be used as atmospheric phase calibrators. Many of these objects also exhibit maser emission in the vibrationally-excited SiO maser at 215 GHz. Because both maser lines likely originate from a similar physical region, these objects can be used to test techniques of phase transfer calibration between millimeter and submillimeter bands. The 658 GHz masers will be important beacons to assess the performance of the Atacama Large Millimeter Array (ALMA) in this challenging high-frequency band.
△ Less
Submitted 20 April, 2007;
originally announced April 2007.
-
Phase Closure at 691 GHz using the Submillimeter Array
Authors:
T. R. Hunter,
A. E. T. Schinckel,
A. B. Peck,
R. D. Christensen,
R. Blundell,
A. Camacho,
F. Patt,
K. Sakamoto,
K. H. Young
Abstract:
Phase closure at 682 GHz and 691 GHz was first achieved using three antennas of the Submillimeter Array (SMA) interferometer located on Mauna Kea, Hawaii. Initially, phase closure was demonstrated at 682.5 GHz on Sept. 19, 2002 using an artificial ground-based "beacon" signal. Subsequently, astronomical detections of both Saturn and Uranus were made at the frequency of the CO(6-5) transition (69…
▽ More
Phase closure at 682 GHz and 691 GHz was first achieved using three antennas of the Submillimeter Array (SMA) interferometer located on Mauna Kea, Hawaii. Initially, phase closure was demonstrated at 682.5 GHz on Sept. 19, 2002 using an artificial ground-based "beacon" signal. Subsequently, astronomical detections of both Saturn and Uranus were made at the frequency of the CO(6-5) transition (691.473 GHz) on all three baselines on Sept. 22, 2002. While the larger planets such as Saturn are heavily resolved even on these short baselines (25.2m, 25.2m and 16.4m), phase closure was achieved on Uranus and Callisto. This was the first successful experiment to obtain phase closure in this frequency band. The CO(6-5) line was also detected towards Orion BN/KL and other Galactic sources, as was the vibrationally-excited 658 GHz water maser line toward evolved stars. We present these historic detections, as well as the first arcsecond-scale images obtained in this frequency band.
△ Less
Submitted 19 April, 2007;
originally announced April 2007.
-
Characterization of Instrumental Phase Stability
Authors:
D. Y. Kubo,
T. R. Hunter,
R. D. Christensen,
P. I. Yamaguchi
Abstract:
Atmospheric water vapor causes significant undesired phase fluctuations for the Submillimeter Array (SMA) interferometer, particularly in its highest frequency observing band of 690 GHz. One proposed solution to this atmospheric effect is to observe simultaneously at two separate frequency bands of 230 and 690 GHz. Although the phase fluctuations have a smaller magnitude at the lower frequency,…
▽ More
Atmospheric water vapor causes significant undesired phase fluctuations for the Submillimeter Array (SMA) interferometer, particularly in its highest frequency observing band of 690 GHz. One proposed solution to this atmospheric effect is to observe simultaneously at two separate frequency bands of 230 and 690 GHz. Although the phase fluctuations have a smaller magnitude at the lower frequency, they can be measured more accurately and on shorter timescales due to the greater sensitivity of the array to celestial point source calibrators at this frequency. In theory, we can measure the atmospheric phase fluctuations in the 230 GHz band, scale them appropriately with frequency, and apply them to the data in 690 band during the post-observation calibration process. The ultimate limit to this atmospheric phase calibration scheme will be set by the instrumental phase stability of the IF and LO systems. We describe the methodology and initial results of the phase stability characterization of the IF and LO systems.
△ Less
Submitted 17 April, 2007;
originally announced April 2007.
-
Receiver control for the Submillimeter Array
Authors:
T. R. Hunter,
R. W. Wilson,
R. Kimberk,
P. S. Leiker,
R. D. Christensen
Abstract:
Efficient operation of a submillimeter interferometer requires remote (preferably automated) control of mechanically tuned local oscillators, phase-lock loops, mixers, optics, calibration vanes and cryostats. The present control system for these aspects of the Submillimeter Array (SMA) will be described. Distributed processing forms the underlying architecture and the software is split between har…
▽ More
Efficient operation of a submillimeter interferometer requires remote (preferably automated) control of mechanically tuned local oscillators, phase-lock loops, mixers, optics, calibration vanes and cryostats. The present control system for these aspects of the Submillimeter Array (SMA) will be described. Distributed processing forms the underlying architecture and the software is split between hardware platforms in a leader/follower arrangement. In each antenna cabin, a serial network of up to ten independent 80C196 microcontroller boards attaches to the real-time PowerPC computer (running LynxOS). A multi-threaded, gcc-compiled leader program on the PowerPC accepts top-level requests via remote procedure calls (RPC), subsequently dispatches tuning commands to the relevant follower microcontrollers, and regularly reports the system status to optical-fiber-based reflective memory for common access by the telescope monitor and error reporting system. All serial communication occurs asynchronously via encoded, variable-length packets. The microcontrollers respond to the requested commands and queries by accessing non-volatile, rewriteable lookup-tables (when appropriate) and executing embedded software that operates additional electronic devices (DACs, ADCs, etc.). Since various receiver hardware components require linear or rotary motion, each microcontroller also implements a position servo via a one-millisecond interrupt service routine which drives a DC-motor/encoder combination that remains standard across each subsystem.
△ Less
Submitted 7 July, 2020; v1 submitted 26 September, 2005;
originally announced September 2005.
-
Dual frequency 230/690 GHz interferometry at the Submillimeter Array
Authors:
Todd R. Hunter,
John W. Barrett,
Raymond Blundell,
Robert D. Christensen,
Robert S. Kimberk,
Steven P. Leiker,
Daniel P. Marrone,
Scott N. Paine,
D. Cosmo Papa,
Nimesh Patel,
Patricia Riddle,
Michael J. Smith,
T. K. Sridharan,
C. Y. Edward Tong,
Ken H. Young,
Jun-Hui Zhao
Abstract:
The Submillimeter Array (SMA), a collaboration between the Smithsonian Astrophysical Observatory and the Academica Sinica Institute for Astronomy and Astrophysics of Taiwan, is an eight-element radio-interferometer designed to operate throughout the major atmospheric windows from about 180 to 900 GHz. In an effort to mitigate the effects of atmospheric instabilities which limit the phase coheren…
▽ More
The Submillimeter Array (SMA), a collaboration between the Smithsonian Astrophysical Observatory and the Academica Sinica Institute for Astronomy and Astrophysics of Taiwan, is an eight-element radio-interferometer designed to operate throughout the major atmospheric windows from about 180 to 900 GHz. In an effort to mitigate the effects of atmospheric instabilities which limit the phase coherence of the array especially in the higher frequency bands, the array was designed to allow simultaneous operation of a low frequency receiver (<350 GHz) with a high frequency receiver (>330 GHz). The overlap region of 330-350 GHz was included to facilitate dual polarization measurements in the frequency range considered to offer the highest sensitivity for continuum observations with the array.
So far, the array is equipped with working SIS receivers covering the frequency ranges 176-256 GHz, 260-350 GHz, and 600-700 GHz, and single frequency operation has been routine in the lower two frequency bands for the past year. More recently, with the completion of IF hardware required to make full use of the SMA cross-correlator, dual receiver operation became possible. We have since made a number of Galactic and extra-galactic astronomical observations in dual-band mode with the hopes of using the 230 GHz receiver as a phase reference to enable improved interferometry in the 650 GHz band. We will present the current antenna and receiver performance, some of the first interferometric images in the 650 GHz receiver band, and our initial attempts at phase transfer.
△ Less
Submitted 15 September, 2005;
originally announced September 2005.