-
Reaction method control of impurity scattering in C-doped MgB2, proving the role of defects besides C substitution level
Authors:
S K Chen,
K Y Tan,
A S Halim,
X Xu,
K S B De Silva,
W K Yeoh,
S X Dou,
A Kursumovic,
J L MacManus-Driscoll
Abstract:
In this study, Si and C were incorporated into polycrystalline MgB2 via in situ reaction of Mg and B with either SiC or with separate Si and C (Si+C). The electrical transport and magnetic properties of the two series of samples were compared. The corrected resistivity at 40K, Rho A(40K), is higher for the SiC reacted samples regardless of carbon (C) substitution level, indicating larger intragrai…
▽ More
In this study, Si and C were incorporated into polycrystalline MgB2 via in situ reaction of Mg and B with either SiC or with separate Si and C (Si+C). The electrical transport and magnetic properties of the two series of samples were compared. The corrected resistivity at 40K, Rho A(40K), is higher for the SiC reacted samples regardless of carbon (C) substitution level, indicating larger intragrain scattering because of the simultaneous reaction between Mg and SiC and carbon substitution during the formation of MgB2. In addition, because of the cleaner reaction route for the SiC reacted samples, the calculated active area that carries current, AF, is twice that of the (Si+C) samples. On the other hand, the upper critical field, Hc2, was similar for both sets of samples despite their different C substitution levels which proves the importance of defect scattering in addition to C substitution level. Hence, the form of the precursor reactants is critical for tuning the form of Hc2(T).
△ Less
Submitted 30 October, 2013;
originally announced October 2013.
-
Improved Superconducting Properties in Bulk MgB2 Prepared by High Energy Milling of Mg and B Powder
Authors:
Y. F. Wu,
Y. F. Lu,
G. Yan,
J. S. Li,
Y. Feng,
H. P. Tang,
S. K. Chen,
H. L. Xu,
C. S. Li,
P. X. Zhang
Abstract:
The MgB2 bulks were prepared by high energy milling of Mg and B powder. The correlations among milling times, microstructure and superconducting properties were investigated in MgB2 bulks. Samples were characterized by x-ray diffraction (XRD), energy dispersive spectrometry (EDX) and scanning electron microscope (SEM), and the magnetization properties were examined by a Superconducting quantum i…
▽ More
The MgB2 bulks were prepared by high energy milling of Mg and B powder. The correlations among milling times, microstructure and superconducting properties were investigated in MgB2 bulks. Samples were characterized by x-ray diffraction (XRD), energy dispersive spectrometry (EDX) and scanning electron microscope (SEM), and the magnetization properties were examined by a Superconducting quantum interfere device (SQUID) magnetometer. It showed that the high energy milling is an effective approach to get fine crystalline (40-100nm) bulk MgB2 with good grain connectivity and high Jc performance. The critical current density reaches to 2.0X10E6A/cm2 at 15K and 0.59T, 5.7X10E5A/cm2 at 2T and 3.0X10E4A/cm2 at 5T.
△ Less
Submitted 13 July, 2006;
originally announced July 2006.
-
Influence of Preparation Process on Microstructure, Critical Current Density and Tc of MgB2/Fe/Cu Wires
Authors:
Y. F. Wu,
G. Yan,
J. S. Li,
Y. Feng,
S. K. Chen,
H. P. Tang,
H. L. Xu,
C. S. Li,
P. X. Zhang,
Y. F. Lu
Abstract:
The powder-in-tube MgB2 wires were prepared by high energy milling of Mg and B powder. The powder was not mechanically alloyed for 2h short milling time. However, the MgB2 grains in wires are very small (20 100nm) and resembled to the dimple after post-heat treatment. The clear evidence for transcrystlline fracture is observed. It indicated that the grain connection was greatly improved and the…
▽ More
The powder-in-tube MgB2 wires were prepared by high energy milling of Mg and B powder. The powder was not mechanically alloyed for 2h short milling time. However, the MgB2 grains in wires are very small (20 100nm) and resembled to the dimple after post-heat treatment. The clear evidence for transcrystlline fracture is observed. It indicated that the grain connection was greatly improved and the fluxing pinning was significantly enhanced. Another point to view is no intermediate annealing was adopted during the whole rolling process. The influence of the post-heat treatment on the transport current density was studied. Despite the lower Tc of about 35K, the transport current density reaches to 3X10E4A/cm2 at 15K and 3.5T for 700 sintered wires.
△ Less
Submitted 9 July, 2006;
originally announced July 2006.
-
The Influence of Synthesis Parameters on Microstructures and Superconducting Properties of MgB2 Bulks
Authors:
Y. F. Wu,
Y. Feng,
G. Yan,
J. S. Li,
H. P. Tang,
S. K. Chen,
Y. Zhao,
M. H. Pu,
H. L. Xu,
C. S. Li,
Y. F. Lu
Abstract:
We succeeded in the synthesis of high-Jc MgB2 bulks via high energy ball-milling of elemental Mg and B powder at ambient temperatures. Alternatively to longtime mechanical alloying technique, the mixed powder was ball-milled for only 1h and the completed reaction is achieved by subsequent annealing. The correlations among synthesis parameters, microstructures and superconducting properties in Mg…
▽ More
We succeeded in the synthesis of high-Jc MgB2 bulks via high energy ball-milling of elemental Mg and B powder at ambient temperatures. Alternatively to longtime mechanical alloying technique, the mixed powder was ball-milled for only 1h and the completed reaction is achieved by subsequent annealing. The correlations among synthesis parameters, microstructures and superconducting properties in MgB2 bulks were investigated. Samples were characterized by XRD and SEM, and the magnetization properties were examined in a SQUID magnetometer. The high- Jc, approximately 1.7*106A/cm2(15K, 0.59T), and improved flux pinning were attribute to a large number of grain boundaries provided by small grain size.
△ Less
Submitted 23 March, 2006; v1 submitted 20 March, 2006;
originally announced March 2006.
-
Strong Pinning Enhancement in MgB2 Using Very Small Dy2O3 Additions
Authors:
S. K. Chen,
M. Wei,
J. L. MacManus-Driscoll
Abstract:
0.5 to 5.0 wt.% Dy2O3 was in-situ reacted with Mg + B to form pinned MgB2. While Tc remained largely unchanged, Jc was strongly enhanced. The best sample (only 0.5 wt.% Dy2O3) had a Jc of 6.5 x 10^5 A/cm^2 at 6K, 1T and 3.5 x 10^5 A/cm^2 at 20K, 1T, around a factor of 4 higher compared to the pure sample, and equivalent to hot-pressed or nano-Si added MgB2 at below 1T. Even distributions of nano…
▽ More
0.5 to 5.0 wt.% Dy2O3 was in-situ reacted with Mg + B to form pinned MgB2. While Tc remained largely unchanged, Jc was strongly enhanced. The best sample (only 0.5 wt.% Dy2O3) had a Jc of 6.5 x 10^5 A/cm^2 at 6K, 1T and 3.5 x 10^5 A/cm^2 at 20K, 1T, around a factor of 4 higher compared to the pure sample, and equivalent to hot-pressed or nano-Si added MgB2 at below 1T. Even distributions of nano-scale precipitates of DyB4 and MgO were observed within the grains. The room temperature resistivity decreased with Dy2O3 indicative of improved grain connectivity.
△ Less
Submitted 9 February, 2006;
originally announced February 2006.
-
Strong influence of boron precursor powder on the critical current density of MgB2
Authors:
S. K. Chen,
K. A. Yates,
M. G. Blamire,
J. L. MacManus-Driscoll
Abstract:
The influence of the nature of the boron precursor on the superconducting properties of polycrystalline MgB2 was studied. Critical current densities for the MgB2 made from high purity amorphous boron are at least a factor of three higher than typical values measured for standard MgB2 samples made from amorphous precursors. Two possible mechanisms are proposed to account for this difference. Samp…
▽ More
The influence of the nature of the boron precursor on the superconducting properties of polycrystalline MgB2 was studied. Critical current densities for the MgB2 made from high purity amorphous boron are at least a factor of three higher than typical values measured for standard MgB2 samples made from amorphous precursors. Two possible mechanisms are proposed to account for this difference. Samples made from crystalline boron powders have around an order of magnitude lower Jc compared to those made from amorphous precursors. X-ray, Tc and resistivity studies indicate that this is as a result of reduced current cross section due to the formation of Mg-B-O phases. The samples made from amorphous B contain far fewer Mg-B-O phases than crystalline B despite the fact that the amorphous B contains more B2O3. The different reactivity rates of the precursor powders accounts for this anomaly.
△ Less
Submitted 27 July, 2005;
originally announced July 2005.
-
Improved Current Densities in MgB2 By Liquid-Assisted Sintering
Authors:
S. K. Chen,
Z. Lockman,
M. Wei,
B. A. Glowacki,
J. L. MacManus-Driscoll
Abstract:
Polycrystalline MgB2 samples with GaN additions were prepared by reaction of Mg, B, and GaN powders. The presence of Ga leads to a low melting eutectic phase which allowed liquid phase sintering and produces plate-like grains. For low-level GaN additions (5% at. % or less), the critical transition temperature, Tc, remained unchanged and in 1T magnetic field, the critical current density, Jc was…
▽ More
Polycrystalline MgB2 samples with GaN additions were prepared by reaction of Mg, B, and GaN powders. The presence of Ga leads to a low melting eutectic phase which allowed liquid phase sintering and produces plate-like grains. For low-level GaN additions (5% at. % or less), the critical transition temperature, Tc, remained unchanged and in 1T magnetic field, the critical current density, Jc was enhanced by a factor of 2 and 10, for temperatures of \~5K and 20K, respectively. The values obtained are approaching those of hot isostatically pressed samples.
△ Less
Submitted 29 April, 2005;
originally announced April 2005.
