-
Strategy for sensing petal mode in presence of AO residual turbulence with pyramid wavefront sensor
Authors:
Nicolas Levraud,
Vincent Chambouleyron,
Jean François Sauvage,
Benoit Neichel,
Mahawa Cisse,
Olivier Fauvarque,
Guido Agapito,
Cédric Plantet,
Anne Laure Cheffot,
Enrico Pinna,
Simone Esposito2,
Thierry Fusco
Abstract:
With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is des…
▽ More
With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is described as a differential piston between the fragment of the pupil separated by the spiders and is responsible for reducing the European Extremely Large Telescope's (ELT) resolution to a 15m telescope resolution. The aim of this paper is to study the measurement of the petal mode by adaptive optics sensors. We want to understand why the Pyramid Wavefront Sensor (PyWFS) cannot measure this petal mode under normal conditions and how to allow this measurement by adapting the Adaptive optics control scheme and the PyWFS. To facilitate our study, we consider a simplified version of the petal mode, featuring a simpler pupil than the ELT. We studied specifically how a system that separates the atmospheric turbulence from the petal measurement would behave. The unmodulated PyWFS (uPyWFS) but the uPyWFS does not make accurate measurements in the presence of atmospheric residuals. Studying the petal mode's power spectral density, we propose a filtering step, consisting of a pinhole around the pyramid tip. This reduces the first path residuals seen by the uPyWFS and restores its accuracy. Finally, we demonstrate our proposed system with end-to-end simulations.To address the petal problem, a two-path adaptive optics with a sensor dedicated to the measurement of the petal mode seems necessary. Through this paper, we demonstrate that an uPyWFS can confuse the petal mode with the residuals from the first path. However, adding a spatial filter on top of said uPyWFS makes it a good petalometer candidate.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Ground-breaking Exoplanet Science with the ANDES spectrograph at the ELT
Authors:
Enric Palle,
Katia Biazzo,
Emeline Bolmont,
Paul Molliere,
Katja Poppenhaeger,
Jayne Birkby,
Matteo Brogi,
Gael Chauvin,
Andrea Chiavassa,
Jens Hoeijmakers,
Emmanuel Lellouch,
Christophe Lovis,
Roberto Maiolino,
Lisa Nortmann,
Hannu Parviainen,
Lorenzo Pino,
Martin Turbet,
Jesse Wender,
Simon Albrecht,
Simone Antoniucci,
Susana C. Barros,
Andre Beaudoin,
Bjorn Benneke,
Isabelle Boisse,
Aldo S. Bonomo
, et al. (34 additional authors not shown)
Abstract:
In the past decade the study of exoplanet atmospheres at high-spectral resolution, via transmission/emission spectroscopy and cross-correlation techniques for atomic/molecular map**, has become a powerful and consolidated methodology. The current limitation is the signal-to-noise ratio during a planetary transit. This limitation will be overcome by ANDES, an optical and near-infrared high-resolu…
▽ More
In the past decade the study of exoplanet atmospheres at high-spectral resolution, via transmission/emission spectroscopy and cross-correlation techniques for atomic/molecular map**, has become a powerful and consolidated methodology. The current limitation is the signal-to-noise ratio during a planetary transit. This limitation will be overcome by ANDES, an optical and near-infrared high-resolution spectrograph for the ELT. ANDES will be a powerful transformational instrument for exoplanet science. It will enable the study of giant planet atmospheres, allowing not only an exquisite determination of atmospheric composition, but also the study of isotopic compositions, dynamics and weather patterns, map** the planetary atmospheres and probing atmospheric formation and evolution models. The unprecedented angular resolution of ANDES, will also allow us to explore the initial conditions in which planets form in proto-planetary disks. The main science case of ANDES, however, is the study of small, rocky exoplanet atmospheres, including the potential for biomarker detections, and the ability to reach this science case is driving its instrumental design. Here we discuss our simulations and the observing strategies to achieve this specific science goal. Since ANDES will be operational at the same time as NASA's JWST and ESA's ARIEL missions, it will provide enormous synergies in the characterization of planetary atmospheres at high and low spectral resolution. Moreover, ANDES will be able to probe for the first time the atmospheres of several giant and small planets in reflected light. In particular, we show how ANDES will be able to unlock the reflected light atmospheric signal of a golden sample of nearby non-transiting habitable zone earth-sized planets within a few tenths of nights, a scientific objective that no other currently approved astronomical facility will be able to reach.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
TIPTOP: cone effect for single laser adaptive optics systems
Authors:
Guido Agapito,
Cédric Plantet,
Fabio Rossi,
Giulia Carlà,
Anne-Laure Cheffot,
Daniele Vassallo,
Arseniy Kuznetsov,
Simon Conseil,
Benoit Neichel
Abstract:
TIPTOP is a python library that is able to quickly compute Point Spread Functions (PSF) of any kind of Adaptive Optics systems. This library has multiple objectives: support the exposure time calculators of future VLT and ELT instruments, support adaptive optics systems design activities, be part of PSF reconstruction pipelines and support the selection of the best asterism of natural guide stars…
▽ More
TIPTOP is a python library that is able to quickly compute Point Spread Functions (PSF) of any kind of Adaptive Optics systems. This library has multiple objectives: support the exposure time calculators of future VLT and ELT instruments, support adaptive optics systems design activities, be part of PSF reconstruction pipelines and support the selection of the best asterism of natural guide stars for observation preparation. Here we report one of the last improvements of TIPTOP: the introduction of the error given by a single conjugated laser, commonly known as the cone effect. The Cone effect was not introduced before because it is challenging due to the non-stationarity of the phase. Laser guide stars are at a finite distance with respect to the telescope and probe beam accepted by the wavefront sensor has the shape of a cone. Given a single spatial frequency in an atmospheric layer, the cone effect arises from the apparent magnification or stretching of this frequency when it reaches the wavefront sensor. The magnification effect leads to an incorrect estimation of the spatial frequency. Therefore, we estimate the residual power by calculating the difference between two sinusoids with different periods: the nominal one and the magnified one. Replicating this for each spatial frequency we obtain the power spectrum associated with the cone effect. We compare this estimation with the one given by end-to-end simulation and we present how we plan to validate this with on-sky data.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
The ESO's Extremely Large Telescope Working Groups
Authors:
Paolo Padovani,
Michele Cirasuolo,
Remco van der Burg,
Faustine Cantalloube,
Elizabeth George,
Markus Kasper,
Kieran Leschinski,
Carlos Martins,
Julien Milli,
Sabine Möhler,
Mark Neeser,
Benoit Neichel,
Angel Otarola,
Rubén Sánchez-Janssen,
Benoit Serra,
Alain Smette,
Elena Valenti,
Christophe Verinaud,
Joël Vernet,
Olivier Absil,
Guido Agapito,
Morten Andersen,
Carmelo Arcidiacono,
Matej Arko,
Pierre Baudoz
, et al. (60 additional authors not shown)
Abstract:
Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations an…
▽ More
Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations and calibrations of the telescope, thirteen specific working groups were created to coordinate the effort between ESO, the instrument consortia, and the wider community. We describe here the goals of these working groups as well as their achievements so far.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Measuring the cophasing state of a segmented mirror with a wavelength sweep and a Zernike phase contrast sensor
Authors:
Anne-Laure Cheffot,
Arthur Vigan,
Samuel Leveque,
Emmanuel Hugot
Abstract:
The demand for higher resolution telescopes leads to segmented primary mirrors which need to be phased for operation. A phasing sensor applying a wavelength sweep technique provides a large capture range without modulating the position of individual mirror segments. This technique offers the potential to monitor the phasing state of a segmented telescope in parallel to the science observations. We…
▽ More
The demand for higher resolution telescopes leads to segmented primary mirrors which need to be phased for operation. A phasing sensor applying a wavelength sweep technique provides a large capture range without modulating the position of individual mirror segments. This technique offers the potential to monitor the phasing state of a segmented telescope in parallel to the science observations. We evaluate the performance of the wavelength sweep technique using a Zernike phase contrast sensor for coarse phasing. Tests results on a dedicated bench show 112 nm rms precision. With the help of a simulation, we explain a known error of the method and we suggest ways for improvements.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.