-
Learning to fail: Predicting fracture evolution in brittle material models using recurrent graph convolutional neural networks
Authors:
Max Schwarzer,
Bryce Rogan,
Yadong Ruan,
Zhengming Song,
Diana Y. Lee,
Allon G. Percus,
Viet T. Chau,
Bryan A. Moore,
Esteban Rougier,
Hari S. Viswanathan,
Gowri Srinivasan
Abstract:
We propose a machine learning approach to address a key challenge in materials science: predicting how fractures propagate in brittle materials under stress, and how these materials ultimately fail. Our methods use deep learning and train on simulation data from high-fidelity models, emulating the results of these models while avoiding the overwhelming computational demands associated with running…
▽ More
We propose a machine learning approach to address a key challenge in materials science: predicting how fractures propagate in brittle materials under stress, and how these materials ultimately fail. Our methods use deep learning and train on simulation data from high-fidelity models, emulating the results of these models while avoiding the overwhelming computational demands associated with running a statistically significant sample of simulations. We employ a graph convolutional network that recognizes features of the fracturing material and a recurrent neural network that models the evolution of these features, along with a novel form of data augmentation that compensates for the modest size of our training data. We simultaneously generate predictions for qualitatively distinct material properties. Results on fracture damage and length are within 3% of their simulated values, and results on time to material failure, which is notoriously difficult to predict even with high-fidelity models, are within approximately 15% of simulated values. Once trained, our neural networks generate predictions within seconds, rather than the hours needed to run a single simulation.
△ Less
Submitted 15 March, 2019; v1 submitted 14 October, 2018;
originally announced October 2018.
-
Estimating Failure in Brittle Materials using Graph Theory
Authors:
M. K. Mudunuru,
N. Panda,
S. Karra,
G. Srinivasan,
V. T. Chau,
E. Rougier,
A. Hunter,
H. S. Viswanathan
Abstract:
In brittle fracture applications, failure paths, regions where the failure occurs and damage statistics, are some of the key quantities of interest (QoI). High-fidelity models for brittle failure that accurately predict these QoI exist but are highly computationally intensive, making them infeasible to incorporate in upscaling and uncertainty quantification frameworks. The goal of this paper is to…
▽ More
In brittle fracture applications, failure paths, regions where the failure occurs and damage statistics, are some of the key quantities of interest (QoI). High-fidelity models for brittle failure that accurately predict these QoI exist but are highly computationally intensive, making them infeasible to incorporate in upscaling and uncertainty quantification frameworks. The goal of this paper is to provide a fast heuristic to reasonably estimate quantities such as failure path and damage in the process of brittle failure. Towards this goal, we first present a method to predict failure paths under tensile loading conditions and low-strain rates. The method uses a $k$-nearest neighbors algorithm built on fracture process zone theory, and identifies the set of all possible pre-existing cracks that are likely to join early to form a large crack. The method then identifies zone of failure and failure paths using weighted graphs algorithms. We compare these failure paths to those computed with a high-fidelity model called the Hybrid Optimization Software Simulation Suite (HOSS). A probabilistic evolution model for average damage in a system is also developed that is trained using 150 HOSS simulations and tested on 40 simulations. A non-parametric approach based on confidence intervals is used to determine the damage evolution over time along the dominant failure path. For upscaling, damage is the key QoI needed as an input by the continuum models. This needs to be informed accurately by the surrogate models for calculating effective modulii at continuum-scale. We show that for the proposed average damage evolution model, the prediction accuracy on the test data is more than 90\%. In terms of the computational time, the proposed models are $\approx \mathcal{O}(10^6)$ times faster compared to high-fidelity HOSS.
△ Less
Submitted 30 July, 2018;
originally announced July 2018.
-
Reduced-Order Modeling through Machine Learning Approaches for Brittle Fracture Applications
Authors:
A. Hunter,
B. A. Moore,
M. K. Mudunuru,
V. T. Chau,
R. L. Miller,
R. B. Tchoua,
C. Nyshadham,
S. Karra,
D. O. Malley,
E. Rougier,
H. S. Viswanathan,
G. Srinivasan
Abstract:
In this paper, five different approaches for reduced-order modeling of brittle fracture in geomaterials, specifically concrete, are presented and compared. Four of the five methods rely on machine learning (ML) algorithms to approximate important aspects of the brittle fracture problem. In addition to the ML algorithms, each method incorporates different physics-based assumptions in order to reduc…
▽ More
In this paper, five different approaches for reduced-order modeling of brittle fracture in geomaterials, specifically concrete, are presented and compared. Four of the five methods rely on machine learning (ML) algorithms to approximate important aspects of the brittle fracture problem. In addition to the ML algorithms, each method incorporates different physics-based assumptions in order to reduce the computational complexity while maintaining the physics as much as possible. This work specifically focuses on using the ML approaches to model a 2D concrete sample under low strain rate pure tensile loading conditions with 20 preexisting cracks present. A high-fidelity finite element-discrete element model is used to both produce a training dataset of 150 simulations and an additional 35 simulations for validation. Results from the ML approaches are directly compared against the results from the high-fidelity model. Strengths and weaknesses of each approach are discussed and the most important conclusion is that a combination of physics-informed and data-driven features are necessary for emulating the physics of crack propagation, interaction and coalescence. All of the models presented here have runtimes that are orders of magnitude faster than the original high-fidelity model and pave the path for develo** accurate reduced order models that could be used to inform larger length-scale models with important sub-scale physics that often cannot be accounted for due to computational cost.
△ Less
Submitted 5 June, 2018;
originally announced June 2018.
-
Direct Testing of Gradual PostPeak Softening of Notched Specimens of Fiber Composites Stabilized by Enhanced Stiffness and Mass
Authors:
Zdenek P. Bazant,
Viet T. Chau,
Gianluca Cusatis,
Marco Salviato
Abstract:
Static and dynamic analysis of the fracture tests of fiber composites in hydraulically servo-controlled testing machines currently in use shows that their grips are much too soft and light for observing the postpeak softening. Based on static and dynamic analysis of the test setup, far stiffer and heavier grips are proposed. Tests of compact-tension fracture specimens of woven carbon-epoxy laminat…
▽ More
Static and dynamic analysis of the fracture tests of fiber composites in hydraulically servo-controlled testing machines currently in use shows that their grips are much too soft and light for observing the postpeak softening. Based on static and dynamic analysis of the test setup, far stiffer and heavier grips are proposed. Tests of compact-tension fracture specimens of woven carbon-epoxy laminates prove this theoretical conclusion. Sufficiently stiff grips allow observation of a stable postpeak, even under load-point displacement control. Dynamic stability analysis further indicates that stable postpeak can be observed under CMOD control provided that a large mass is rigidly attached to the current soft grips. The fracture energy deduced from the area under the measured complete load-deflection curve with stable postpeak agrees closely with the fracture energy deduced from the size effect tests of the same composite. Previous suspicions of dynamic snapback in the testing of composites are dispelled. So is the previous view that fracture mechanics was inapplicable to the fiber-polymer composites.
△ Less
Submitted 4 July, 2016;
originally announced July 2016.
-
Why Fracking Works and How to Optimize It
Authors:
Z. P. Bazant,
M. Salviato,
V. T. Chau
Abstract:
Although spectacular advances in hydraulic fracturing, aka fracking, have taken place and many aspects are well understood by now, the topology, geometry and evolution of the crack system hydraulically produced in the shale still remains an enigma. Expert opinions differ widely and fracture mechanicians must wonder why fracking works. Fracture mechanics of individual pressurized cracks has recentl…
▽ More
Although spectacular advances in hydraulic fracturing, aka fracking, have taken place and many aspects are well understood by now, the topology, geometry and evolution of the crack system hydraulically produced in the shale still remains an enigma. Expert opinions differ widely and fracture mechanicians must wonder why fracking works. Fracture mechanics of individual pressurized cracks has recently been clarified but the vital problem of stability of interacting hydraulic cracks escaped attention. Progress in this regard would likely allow optimization of fracking and reduction of environmental footprint. The present article first focuses on the classical solutions of the critical states of localization instability of a system of cooling or shrinkage cracks and shows that these solutions can be transferred to the system of hydraulic cracks. It is concluded that if the profile of hydraulic pressure along the cracks can be made almost uniform, with a steep pressure drop at the front, the localization instability can be avoided. To achieve this kind of profile the pum** rate (corrected for the leak rate) must not be too high. Subsequently, numerical solutions are presented to show that an idealized system of circular equidistant vertical cracks propagating from a horizontal borehole behaves similarly. It is pointed out that one important role of proppants, as well as acids that promote creation debris in the new cracks, is that they partially help to limit crack closings and thus localization. Based on the extremely low permeability of gas shale, one must imagine a hierarchical progressively refined crack systems in which the finest cracks have spacing in the sub-centimeter range. The overall conclusion is that what makes fracking work is the suppression or mitigation of localization instabilities of crack systems, which requires achieving uniform pressure profiles along the cracks.
△ Less
Submitted 6 July, 2014; v1 submitted 28 June, 2014;
originally announced June 2014.
