-
Heteroepitaxy of FCC-on-FCC Systems of Large Misfit
Authors:
Paul Wynblatt,
Dominique Chatain,
Ulrich Dahmen
Abstract:
To understand the effects of lattice mismatch on heteroepitaxial growth, we have studied the equilibrium structure and orientation relationships (ORs) of FCC films grown epitaxially on FCC substrates, using molecular dynamics simulations in conjunction with embedded atom method potentials. Three film/substrate systems have been investigated, namely: Ag on Cu, Ag on Ni and Pb on Al. These systems c…
▽ More
To understand the effects of lattice mismatch on heteroepitaxial growth, we have studied the equilibrium structure and orientation relationships (ORs) of FCC films grown epitaxially on FCC substrates, using molecular dynamics simulations in conjunction with embedded atom method potentials. Three film/substrate systems have been investigated, namely: Ag on Cu, Ag on Ni and Pb on Al. These systems cover a significant range of lattice mismatch, from 12.6% for Ag/Cu to 21.8% for Pb/Al. For each system, the ORs of films on six different substrate orientations, namely: (100), (511), (311), (211), (322) and (111), have been investigated. Films on these susbstrates cover a gradual transition from the oct-cube orientation relationship, which occurs only on (100) substrates, to the heterotwin orientation relationship, which often occurs on (111) substrates. It is found that the resulting ORs vary systematically with substrate orientation, but that the pattern of variation is almost identical for all three systems, and therefore largely independent of mismatch. However, the manner in which mismatch is accommodated does depend on the magnitude of mismatch. Simulations point to an important role for edge-to-edge matching and defects such as stacking faults. An analysis of these results in terms of transformation strains highlights the distinction between the ORs, which are largely independent of mismatch, and the local interfacial structure, which changes directly with mismatch.
△ Less
Submitted 22 December, 2021;
originally announced December 2021.
-
Statistical behaviour of interfaces subjected to curvature flow and torque effects applied to microstructural evolutions
Authors:
Sebastian Florez,
Karen Alvarado,
Brayan Murgas,
Nathalie Bozzolo,
Dominique Chatain,
Carl E. Krill III,
Mingyan Wang,
Greg S. Rhorer,
Marc Bernacki
Abstract:
The movement of grain boundaries in pure metals and alloys with a low concentration of dislocations has been historically proved to follow curvature flow behavior. This mechanism is typically known as grain growth (GG). However, recent 3D in-situ experimental results tend to question this global picture concerning the influence of the curvature on the kinetics of interface migration. This article…
▽ More
The movement of grain boundaries in pure metals and alloys with a low concentration of dislocations has been historically proved to follow curvature flow behavior. This mechanism is typically known as grain growth (GG). However, recent 3D in-situ experimental results tend to question this global picture concerning the influence of the curvature on the kinetics of interface migration. This article explains, thanks to 2D anisotropic full-field simulations, how the torque effects can complexify these discussions. It is then illustrated that neglecting torque effects in full-field formulations remains potentially a strong hypothesis. The apparent mobility can be much more complex than expected without necessarily questioning the influence of the curvature on the local kinetic equation.
△ Less
Submitted 10 August, 2021; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Structure and hardness of in situ synthesized nano-oxide strengthened CoCrFeNi high entropy alloy thin films
Authors:
Subin Lee,
Dominique Chatain,
Christian H. Liebscher,
Gerhard Dehm
Abstract:
In this study, we report on face-centered cubic structured CoCrFeNi high-entropy alloy thin films with finely dispersed nano-oxide particles which are formed by internal oxidation. Analytical scanning transmission electron microscopy imaging found that the particles are Cr2O3. The oxide particles contribute to the hardening of the film increasing its hardness by 14% compared to that of the film wi…
▽ More
In this study, we report on face-centered cubic structured CoCrFeNi high-entropy alloy thin films with finely dispersed nano-oxide particles which are formed by internal oxidation. Analytical scanning transmission electron microscopy imaging found that the particles are Cr2O3. The oxide particles contribute to the hardening of the film increasing its hardness by 14% compared to that of the film without precipitates, through the Orowan-type strengthening mechanism. Our novel approach paves the way to design medium- and high-entropy alloys with high strength by making use of oxide phases.
△ Less
Submitted 23 February, 2021;
originally announced February 2021.
-
Nanocrystalline equiatomic CoCrFeNi alloy thin films: Are they single phase fcc?
Authors:
Maya Kini,
Subin Lee,
Alan Savan,
Benjamin Breitbach,
Younes Addab,
Wenjun Lu,
Matteo Ghidelli,
Alfred Ludwig,
Nathalie Bozzolo,
Christina Scheu,
Dominique Chatain,
Gerhard Dehm
Abstract:
The bulk quaternary equiatomic CoCrFeNi alloy is studied extensively in literature. Under experimental conditions, it shows a single-phase fcc structure and its physical and mechanical properties are similar to those of the quinary equiatomic CoCrFeMnNi alloy. Many studies in literature have focused on the mechanical properties of bulk nanocrystalline high entropy alloys or compositionally complex…
▽ More
The bulk quaternary equiatomic CoCrFeNi alloy is studied extensively in literature. Under experimental conditions, it shows a single-phase fcc structure and its physical and mechanical properties are similar to those of the quinary equiatomic CoCrFeMnNi alloy. Many studies in literature have focused on the mechanical properties of bulk nanocrystalline high entropy alloys or compositionally complex alloys, and their microstructure evolution upon annealing. The thin film processing route offers an excellent alternative to form nanocrystalline alloys. Due to the high nucleation rate and high density of defects in thin films synthesized by sputtering, the kinetics of microstructure evolution is often accelerated compared to those taking place in the bulk. Here, thin films are used to study the phase evolution in nanocrystalline CoCrFeNi deposited on Si/SiO 2 and c-sapphire substrates by magnetron cosputtering from elemental sources. The phases and microstructure of the films are discussed in comparison to the bulk alloy. The main conclusion is that second phases can form even at room temperature provided there are sufficient nucleation sites.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Surface segregation in multicomponent high entropy alloys: Atomistic simulations versus a multilayer analytical model
Authors:
Dominique Chatain,
Paul Wynblatt
Abstract:
This paper compares two approaches for investigating the near-surface composition profile that results from surface segregation in the so-called Cantor alloy, an equi-molar alloy of CoCrFeMnNi. One approach consists of atomistic computer simulations by a combination of Monte Carlo, molecular dynamics and molecular statics techniques, and the other is a nearest neighbor analytical calculation perfo…
▽ More
This paper compares two approaches for investigating the near-surface composition profile that results from surface segregation in the so-called Cantor alloy, an equi-molar alloy of CoCrFeMnNi. One approach consists of atomistic computer simulations by a combination of Monte Carlo, molecular dynamics and molecular statics techniques, and the other is a nearest neighbor analytical calculation performed in the regular solution approximation with a multilayer model, developed here for the first time for a N-component system and tested for the 5-component Cantor alloy. This type of comparison is useful because a typical computer simulation requires the use of ~100 parallel processors for 2 to 3 hours, whereas a similar calculation by means of the analytical model can be performed in a few seconds on a laptop machine. The results obtained show qualitatively good agreement between the two approaches. Thus, while the results of the computer simulations are presumably more reliable, and provide an atomic scale picture, if massive computations are required, for example, in order to optimize the composition of a multicomponent alloy, then an initial screening of the composition space by the analytical model could provide a highly useful means of narrowing the regions of interest, in the same way that the CALPHAD method allows rapid investigation of phase diagrams in complex multinary systems.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Influence of step structure on preferred orientation relationships of Ag deposited on Ni(111)
Authors:
Dominique Chatain,
Saransh Singh,
Blandine Courtois,
Jérémy Silvent,
Elodie Verzeroli,
Farangis Ram,
Gregory Rohrer,
Marc de Graef,
Paul Wynblatt
Abstract:
Previous studies have shown that the orientation relationships which develop in hetero-epitaxy are strongly influenced by the alignment of steps in the deposit with the pre-existing steps of the substrate. In this paper we use a combination of experiments with computer simulations to identify the important influence of substrate step structure on the eventual orientation relationships that develop…
▽ More
Previous studies have shown that the orientation relationships which develop in hetero-epitaxy are strongly influenced by the alignment of steps in the deposit with the pre-existing steps of the substrate. In this paper we use a combination of experiments with computer simulations to identify the important influence of substrate step structure on the eventual orientation relationships that develop in the deposit. We have made use of Ag deposited on Ni as it has been used extensively as a model system for the study of hetero-epitaxy. This system displays a large lattice mismatch of 16%. It is shown that on any surface vicinal to Ni(111), which has two possible kinds of <110> steps (A-steps with {100} ledges and B-steps with {111} ledges), a Ag deposit adopts a single orientation relationship because only A-steps remain stable in the presence of Ag.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Microstructure evolution and thermal stability of equiatomic CoCrFeNi films on (0001)alpha-Al2O3
Authors:
Younes Addab,
Maya K. Kini,
Blandine Courtois,
Alan Savan,
Alfred Ludwig,
Nathalie Bozzolo,
Christina Scheu,
Gerhard Dehm,
Dominique Chatain
Abstract:
Homogeneous face-centered cubic (fcc) polycrystalline CoCrFeNi films were deposited at room temperature on (0001)alpha-Al2O3 (c-sapphire). Phase and morphological stability of 200 to 670 nm thick films were investigated between 973 K and 1423 K. The fcc-phase persists while the original <111> texture of 30-100 nm wide columnar grains evolves into ~10 or ~1000 micron wide grains. Only the grains ha…
▽ More
Homogeneous face-centered cubic (fcc) polycrystalline CoCrFeNi films were deposited at room temperature on (0001)alpha-Al2O3 (c-sapphire). Phase and morphological stability of 200 to 670 nm thick films were investigated between 973 K and 1423 K. The fcc-phase persists while the original <111> texture of 30-100 nm wide columnar grains evolves into ~10 or ~1000 micron wide grains. Only the grains having specific orientation relationships to the sapphire grow; as in the case of pure fcc metal (M) films 4 orientation relationships (OR) are found: OR1 (M(111)[1-10]//alpha-Al2O3 (0001)[1-100]) and OR2 (M(111)[1-10]//alpha-Al2O3 (0001)[11-20]) and their twin-related variants (OR1t and OR2t). Below 1000 K, the film microstructure stabilizes into 10 micron wide OR1 and OR1t twin grains independent of film thickness. Above 1000 K, the OR2 and OR2t grains expand to sizes exceeding more than a 1000 times the film thickness. Upon annealing, the films either retain their integrity or break-up depending on the competing kinetics of grain growth and grain boundary grooving. Triple junctions of the grain boundaries, the major actors in film stability, were tracked. Thinner films and higher temperatures favor film break-up by dewetting from the holes grooved at the triple junctions down to the substrate. The grain boundaries of the OR2 and OR2t grains migrate fast enough to overcome the nucleation of holes from which break-up could initiate. The growth of the OR2 and OR2t grains in this complex alloy is faster than in pure fcc metals at equivalent homologous annealing temperatures.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
First demonstration of multi-MeV proton acceleration from a cryogenic hydrogen ribbon target
Authors:
Stephan D. Kraft,
Lieselotte Obst,
Josefine Metzkes-Ng,
Hans-Peter Schlenvoigt,
Karl Zeil,
Sylvain Michaux,
Denis Chatain,
Jean-Pal Perin,
Sophia N. Chen,
Julien Fuchs,
Maxence Gauthier,
Thomas E. Cowan Ulrich Schramm
Abstract:
We show efficient laser driven proton acceleration up to 14MeV from a 50 $μ$m thick cryogenic hydrogen ribbon. Pulses of the short pulse laser ELFIE at LULI with a pulse length of $\approx$ 350 fs at an energy of 8 J per pulse are directed onto the target. The results are compared to proton spectra from metal and plastic foils with different thicknesses and show a similar good performance both in…
▽ More
We show efficient laser driven proton acceleration up to 14MeV from a 50 $μ$m thick cryogenic hydrogen ribbon. Pulses of the short pulse laser ELFIE at LULI with a pulse length of $\approx$ 350 fs at an energy of 8 J per pulse are directed onto the target. The results are compared to proton spectra from metal and plastic foils with different thicknesses and show a similar good performance both in maximum energy as well as in proton number. Thus, this target type is a promising candidate for experiments with high repetition rate laser systems.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Magnetic gravity compensation
Authors:
Vadim Nikolayev,
D. Chatain,
D. Beysens,
G. Pichavant
Abstract:
Magnetic gravity compensation in fluids is increasingly popular as a means to achieve low-gravity forphysical and life sciences studies. We explain the basics of the magnetic gravity compensation and analyzeits advantages and drawbacks. The main drawback is the spatial heterogeneity of the residual gravity field.We discuss its causes. Some new results concerning the heterogeneity estimation and me…
▽ More
Magnetic gravity compensation in fluids is increasingly popular as a means to achieve low-gravity forphysical and life sciences studies. We explain the basics of the magnetic gravity compensation and analyzeits advantages and drawbacks. The main drawback is the spatial heterogeneity of the residual gravity field.We discuss its causes. Some new results concerning the heterogeneity estimation and measurement arepresented. A review of the existing experimental installations and works involving the magnetic gravitycompensation is given for both physical and life sciences.
△ Less
Submitted 11 April, 2018;
originally announced April 2018.
-
Boiling crisis dynamics: low gravity experiments at high pressure
Authors:
Vadim Nikolayev,
Yves Garrabos,
Carole Lecoutre,
T. Charignon,
Denis Hitz,
Denis Chatain,
Romain Guillaument,
Samuel Marre,
Daniel Beysens
Abstract:
To understand the boiling crisis mechanism, one can take advantage of the slowing down of boiling at high pressures, in the close vicinity of the liquid-vapor critical point of the given fluid. To preserve conventional bubble geometry, such experiments need to be carried out in low gravity. We report here two kinds of saturated boiling experiments. First we discuss the spatial experiments with SF…
▽ More
To understand the boiling crisis mechanism, one can take advantage of the slowing down of boiling at high pressures, in the close vicinity of the liquid-vapor critical point of the given fluid. To preserve conventional bubble geometry, such experiments need to be carried out in low gravity. We report here two kinds of saturated boiling experiments. First we discuss the spatial experiments with SF$_6$ at 46$^\circ$ C. Next we address two ground-based experiments under magnetic gravity compensation with H$_2$ at 33 K. We compare both kinds of experiments and show their complementarity. The dry spots under vapor bubbles are visualized by using transparent heaters made with metal oxide films. We evidence two regimes of the dry spots growth: the regime of circular dry spots and the regime of chain coalescence of dry spots that immediately precedes the heater dryout. A recent H$_2$ experiment is shown to bridge the gap between the near-critical and low pressure boiling experiments.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Using magnetic levitation to produce cryogenic targets for inertial fusion energy: experiment and theory
Authors:
D Chatain,
Vadim Nikolayev
Abstract:
We present experimental and theoretical studies of magnetic levitation of hydrogen gas bubble surrounded by liquid hydrogen confined in a semi-transparent spherical shell of 3 mm internal diameter. Such shells are used as targets for the inertial confinement fusion (ICF), for which a homogeneous (within a few percent) layer of a hydrogen isotope should be deposited on the internal walls of the she…
▽ More
We present experimental and theoretical studies of magnetic levitation of hydrogen gas bubble surrounded by liquid hydrogen confined in a semi-transparent spherical shell of 3 mm internal diameter. Such shells are used as targets for the inertial confinement fusion (ICF), for which a homogeneous (within a few percent) layer of a hydrogen isotope should be deposited on the internal walls of the shells. The gravity does not allow the hydrogen layer thickness to be homogeneous. To compensate this gravity effect, we have used a non-homogeneous magnetic field created by a 10 T superconductive solenoid. Our experiments show that the magnetic levitation homogenizes the thickness of liquid hydrogen layer. However, the variation of the layer thickness is very difficult to measure experimentally. Our theoretical model allows the exact shape of the layer to be predicted. The model takes into account the surface tension, gravity, van der Waals, and magnetic forces. The numerical calculation shows that the homogeneity of the layer thickness is satisfactory for the ICF purposes.
△ Less
Submitted 25 January, 2016;
originally announced February 2016.
-
Bubble spreading during the boiling crisis: modelling and experimenting in microgravity
Authors:
Vadim Nikolayev,
D Beysens,
Y Garrabos,
C Lecoutre,
D Chatain
Abstract:
Boiling is a very efficient way to transfer heat from a heater to the liquid carrier. We discuss the boiling crisis, a transition between two regimes of boiling: nucleate and film boiling. The boiling crisis results in a sharp decrease in the heat transfer rate, which can cause a major accident in industrial heat exchangers. In this communication, we present a physical model of the boiling crisis…
▽ More
Boiling is a very efficient way to transfer heat from a heater to the liquid carrier. We discuss the boiling crisis, a transition between two regimes of boiling: nucleate and film boiling. The boiling crisis results in a sharp decrease in the heat transfer rate, which can cause a major accident in industrial heat exchangers. In this communication, we present a physical model of the boiling crisis based on the vapor recoil effect. Under the action of the vapor recoil the gas bubbles begin to spread over the heater thus forming a germ for the vapor film. The vapor recoil force not only causes its spreading, it also creates a strong adhesion to the heater that prevents the bubble departure, thus favoring the further spreading. Near the liquid-gas critical point, the bubble growth is very slow and allows the kinetics of the bubble spreading to be observed. Since the surface tension is very small in this regime, only microgravity conditions can preserve a convex bubble shape. In the experiments both in the Mir space station and in the magnetic levitation facility, we directly observed an increase of the apparent contact angle and spreading of the dry spot under the bubble. Numerical simulations of the thermally controlled bubble growth show this vapor recoil effect too thus confirming our model of the boiling crisis.
△ Less
Submitted 28 January, 2016;
originally announced January 2016.
-
Experimental Evidence of the Vapor Recoil Mechanism in the Boiling Crisis
Authors:
Vadim Nikolayev,
D Chatain,
Y Garrabos,
D Beysens
Abstract:
Boiling crisis experiments are carried out in the vicinity of the liquid-gas critical point of H2. A magnetic gravity compensation setup is used to enable nucleate boiling at near critical pressure. The measurements of the critical heat flux that defines the threshold for the boiling crisis are carried out as a function of the distance from the critical point. The obtained power law behavior and t…
▽ More
Boiling crisis experiments are carried out in the vicinity of the liquid-gas critical point of H2. A magnetic gravity compensation setup is used to enable nucleate boiling at near critical pressure. The measurements of the critical heat flux that defines the threshold for the boiling crisis are carried out as a function of the distance from the critical point. The obtained power law behavior and the boiling crisis dynamics agree with the predictions of the vapor recoil mechanism and disagree with the classical vapor column mechanism.
△ Less
Submitted 26 January, 2016;
originally announced January 2016.
-
Quench cooling under reduced gravity
Authors:
D. Chatain,
C. Mariette,
V. S. Nikolayev,
D. Beysens
Abstract:
We report the quench cooling experiments performed with liquid O2 under different levels of gravity simulated with the magnetic gravity compensation. A copper disk is quenched from 270K to 90K. It is found that the cooling time in microgravity is very long in comparison with any other gravity level. This phenomenon is explained by the isolation effect of the gas surrounding the disk. The liquid su…
▽ More
We report the quench cooling experiments performed with liquid O2 under different levels of gravity simulated with the magnetic gravity compensation. A copper disk is quenched from 270K to 90K. It is found that the cooling time in microgravity is very long in comparison with any other gravity level. This phenomenon is explained by the isolation effect of the gas surrounding the disk. The liquid subcooling is shown to drastically improuve the heat exchange thus reducing the cooling time (about 20 times). The effect of subcooling on the heat transfer is analyzed at different gravity levels. It is shown that such type of experiments cannot be used for the analysis of the critical heat flux (CHF) of the boiling crisis. The minimum heat flux (MHF) of boiling is analyzed instead.
△ Less
Submitted 25 March, 2013;
originally announced March 2013.
-
Is CHF triggered by the vapor recoil effect?
Authors:
Vadim S. Nikolayev,
D. Beysens,
D. Chatain
Abstract:
This paper deals with the triggering mechanism of the boiling crisis, a transition from nucleate to film boiling. We observe the boiling crisis in pool saturated boiling experimentally at nearly critical pressure to take advantage of the slowness of the bubble growth and of the smallness of the Critical Heat Flux (CHF) that defines the transition point. Such experiments require the reduced gravi…
▽ More
This paper deals with the triggering mechanism of the boiling crisis, a transition from nucleate to film boiling. We observe the boiling crisis in pool saturated boiling experimentally at nearly critical pressure to take advantage of the slowness of the bubble growth and of the smallness of the Critical Heat Flux (CHF) that defines the transition point. Such experiments require the reduced gravity conditions. Close to the CHF, the slow growth of the individual dry spots and their subsequent fusion on the transparent heater are observed through the latter. As discussed in the paper, these observations are consistent with numerical results obtained with the vapor recoil model of the boiling crisis.
△ Less
Submitted 20 July, 2007;
originally announced July 2007.