Showing 1–9 of 9 results for author: Chase, B E

First Performance Results Of The PIP2IT MEBT 200 Ohm Kicker Prototype

Authors: G. Saewert, M. H. Awida, B. E. Chase, A. Chen, J. Einstein-Curtis, D. Frolov, K. Martin, H. Pfeffer, D. Wolff, S. Khole, D. Sharma

Abstract: The PIP-II project is a program to upgrade the Fermilab accelerator complex. The PIP-II linac includes a 2.1 MeV Medium Energy Beam Transport (MEBT) section that incorporates a unique chop** system to perform arbitrary, bunch-by-bunch removal of 162.5 MHz structured beam. The MEBT chop** system will consist of two identical kickers working together and a beam absorber. One design of two having… ▽ More The PIP-II project is a program to upgrade the Fermilab accelerator complex. The PIP-II linac includes a 2.1 MeV Medium Energy Beam Transport (MEBT) section that incorporates a unique chop** system to perform arbitrary, bunch-by-bunch removal of 162.5 MHz structured beam. The MEBT chop** system will consist of two identical kickers working together and a beam absorber. One design of two having been proposed has been a 200 Ohm characteristic impedance traveling wave dual-helix kicker driven with custom designed high-speed switches. This paper reports on the first performance results of one prototype kicker built, installed and tested with beam at the PIP-II Injector Test (PIP2IT) facility. The helix deflector design details are discussed. The electrical performance of the high-speed switch driver operating at 500 V bias is presented. Tests performed were chop** beam at 81.25 MHz for microseconds as well as with a truly arbitrary pattern for 550 $μ$s bursts having a 45 MHz average switching rate and repeating at 20 Hz. △ Less

Submitted 22 June, 2018; originally announced June 2018.

Comments: 3 pp

Report number: Fermilab-Conf-18-144-AD

Adaptive beam loading compensation in room temperature bunching cavities

Authors: J. P. Edelen, B. E. Chase, E. Cullerton, P. Varghese

Abstract: In this paper we present the design, simulation, and proof of principle results of an optimization based adaptive feed-forward algorithm for beam-loading compensation in a high impedance room temperature cavity. We begin with an overview of prior developments in beam loading compensation. Then we discuss different techniques for adaptive beam loading compensation and why the use of Newton's Method… ▽ More In this paper we present the design, simulation, and proof of principle results of an optimization based adaptive feed-forward algorithm for beam-loading compensation in a high impedance room temperature cavity. We begin with an overview of prior developments in beam loading compensation. Then we discuss different techniques for adaptive beam loading compensation and why the use of Newton's Method is of interest for this application. This is followed by simulation and initial experimental results of this method. △ Less

Submitted 23 March, 2018; originally announced March 2018.

Comments: Poster presented at LLRF Workshop 2017 (LLRF2017, arXiv:1803.07677)

Report number: LLRF2017/P-31

Automatic phase calibration for RF cavities using beam-loading signals

Authors: J. P. Edelen, B. E. Chase

Abstract: Precise calibration of the cavity phase signals is necessary for the operation of any particle accelerator. For many systems this requires human in the loop adjustments based on measurements of the beam parameters downstream. Some recent work has developed a scheme for the calibration of the cavity phase using beam measurements and beam-loading however this scheme is still a multi-step process tha… ▽ More Precise calibration of the cavity phase signals is necessary for the operation of any particle accelerator. For many systems this requires human in the loop adjustments based on measurements of the beam parameters downstream. Some recent work has developed a scheme for the calibration of the cavity phase using beam measurements and beam-loading however this scheme is still a multi-step process that requires heavy automation or human in the loop. In this paper we analyze a new scheme that uses only RF signals reacting to beam-loading to calculate the phase of the beam relative to the cavity. This technique could be used in slow control loops to provide real-time adjustment of the cavity phase calibration without human intervention thereby increasing the stability and reliability of the accelerator. △ Less

Submitted 23 March, 2018; originally announced March 2018.

Comments: Talk presented at LLRF Workshop 2017 (LLRF2017, arXiv:1803.07677)

Report number: LLRF2017/O-26

Low Level RF Control for the PIP-II Accelerator

Authors: J. P. Edelen, B. E. Chase, E. Cullerton, J. Einstein-Curtis, J. Holzbauer, D. Klepec, Y. Pischalnikov, W. Schappert, P. Varghese, G. Joshi, S. Khole, D. Sharma

Abstract: The PIP-II accelerator is a proposed upgrade to the Fermilab accelerator complex that will replace the existing, 400 MeV room temperature LINAC with an 800 MeV superconducting LINAC. Part of this upgrade includes a new injection scheme into the booster that levies tight requirements on the LLRF control system for the cavities. In this paper we discuss the challenges of the PIP-II accelerator and t… ▽ More The PIP-II accelerator is a proposed upgrade to the Fermilab accelerator complex that will replace the existing, 400 MeV room temperature LINAC with an 800 MeV superconducting LINAC. Part of this upgrade includes a new injection scheme into the booster that levies tight requirements on the LLRF control system for the cavities. In this paper we discuss the challenges of the PIP-II accelerator and the present status of the LLRF system for this project. △ Less

Submitted 21 March, 2018; originally announced March 2018.

Comments: Talk presented at LLRF Workshop 2017 (LLRF2017, arXiv:1803.07677)

Report number: LLRF2017/O-15

Neural Network Model Of The PXIE RFQ Cooling System and Resonant Frequency Response

Authors: A. L. Edelen, S. G. Biedron, S. V. Milton, D. Bowring, B. E. Chase, J. P. Edelen, J. Steimel

Abstract: As part of the PIP-II Injector Experiment (PXIE) accelerator, a four-vane radio frequency quadrupole (RFQ) accelerates a 30-keV, 1-mA to 10-mA H- ion beam to 2.1 MeV. It is designed to operate at a frequency of 162.5 MHz with arbitrary duty factor, including continuous wave (CW) mode. The resonant frequency is controlled solely by a water-cooling system. We present an initial neural network model… ▽ More As part of the PIP-II Injector Experiment (PXIE) accelerator, a four-vane radio frequency quadrupole (RFQ) accelerates a 30-keV, 1-mA to 10-mA H- ion beam to 2.1 MeV. It is designed to operate at a frequency of 162.5 MHz with arbitrary duty factor, including continuous wave (CW) mode. The resonant frequency is controlled solely by a water-cooling system. We present an initial neural network model of the RFQ frequency response to changes in the cooling system and RF power conditions during pulsed operation. A neural network model will be used in a model predictive control scheme to regulate the resonant frequency of the RFQ. △ Less

Submitted 21 December, 2016; originally announced December 2016.

Comments: 3 pp. Proceedings of the 2016 International Particle Accelerator Conference (IPAC), May 8-13, 2016

Report number: Fermilab-Conf-16-603-AD

Resonant Frequency Control For the PIP-II Injector Test RFQ: Control Framework and Initial Results

Authors: A. L. Edelen, S. G. Biedron, S. V. Milton, D. Bowring, B. E. Chase, J. P. Edelen, D. Nicklaus, J. Steimel

Abstract: For the PIP-II Injector Test (PI-Test) at Fermilab, a four-vane radio frequency quadrupole (RFQ) is designed to accelerate a 30-keV, 1-mA to 10-mA, H- beam to 2.1 MeV under both pulsed and continuous wave (CW) RF operation. The available headroom of the RF amplifiers limits the maximum allowable detuning to 3 kHz, and the detuning is controlled entirely via thermal regulation. Fine control over th… ▽ More For the PIP-II Injector Test (PI-Test) at Fermilab, a four-vane radio frequency quadrupole (RFQ) is designed to accelerate a 30-keV, 1-mA to 10-mA, H- beam to 2.1 MeV under both pulsed and continuous wave (CW) RF operation. The available headroom of the RF amplifiers limits the maximum allowable detuning to 3 kHz, and the detuning is controlled entirely via thermal regulation. Fine control over the detuning, minimal manual intervention, and fast trip recovery is desired. In addition, having active control over both the walls and vanes provides a wider tuning range. For this, we intend to use model predictive control (MPC). To facilitate these objectives, we developed a dedicated control framework that handles higher-level system decisions as well as executes control calculations. It is written in Python in a modular fashion for easy adjustments, readability, and portability. Here we describe the framework and present the first control results for the PI-Test RFQ under pulsed and CW operation. △ Less

Submitted 16 December, 2016; originally announced December 2016.

Comments: 4 pp. Proceedings of the 2016 North American Particle Accelerator Conference (Oct. 9-14, 2016)

Report number: Fermilab-Conf-16-601-AD

Neural Networks for Modeling and Control of Particle Accelerators

Authors: A. L. Edelen, S. G. Biedron, B. E. Chase, D. Edstrom, S. V. Milton, P. Stabile

Abstract: We describe some of the challenges of particle accelerator control, highlight recent advances in neural network techniques, discuss some promising avenues for incorporating neural networks into particle accelerator control systems, and describe a neural network-based control system that is being developed for resonance control of an RF electron gun at the Fermilab Accelerator Science and Technolog… ▽ More We describe some of the challenges of particle accelerator control, highlight recent advances in neural network techniques, discuss some promising avenues for incorporating neural networks into particle accelerator control systems, and describe a neural network-based control system that is being developed for resonance control of an RF electron gun at the Fermilab Accelerator Science and Technology (FAST) facility, including initial experimental results from a benchmark controller. △ Less

Submitted 19 October, 2016; originally announced October 2016.

Comments: 21 pp

Report number: Fermilab-Pub-16-121-AD

Journal ref: IEEE Transactions on Nuclear Science, Volume: 63, Issue: 2, 20 April 2016

Initial experimental results of a machine learning-based temperature control system for an RF gun

Authors: A. L. Edelen, S. G. Biedron, S. V. Milton, B. E. Chase, D. J. Crawford, N. Eddy, D. Edstrom Jr., E. R. Harms, J. Ruan, J. K. Santucci, P. Stabile

Abstract: Colorado State University (CSU) and Fermi National Accelerator Laboratory (Fermilab) have been develo** a control system to regulate the resonant frequency of an RF electron gun. As part of this effort, we present initial test results for a benchmark temperature controller that combines a machine learning-based model and a predictive control algorithm. This is part of an on-going effort to devel… ▽ More Colorado State University (CSU) and Fermi National Accelerator Laboratory (Fermilab) have been develo** a control system to regulate the resonant frequency of an RF electron gun. As part of this effort, we present initial test results for a benchmark temperature controller that combines a machine learning-based model and a predictive control algorithm. This is part of an on-going effort to develop adaptive, machine learning-based tools specifically to address control challenges found in particle accelerator systems. △ Less

Submitted 5 November, 2015; originally announced November 2015.

Comments: 3 pp

Report number: FERMILAB-CONF-15-182-AD

Journal ref: Proceedings of IPAC 2015, May 3-8 2015, Richmond, VA

Energy Spread of the Proton Beam in the Fermilab Booster at its Injection Energy

Authors: C. M. Bhat, B. E. Chase, S. J. Chaurize, F. G. Garcia, K. Seiya, W. A. Pellico, T. M. Sullivan, A. K. Triplett

Abstract: We have measured the total energy spread (99 persent energy spread) of the Booster beam at its injection energy of 400 MeV by three different methods - 1) creating a notch of about 40 nsec wide in the beam immediately after multiple turn injection and measuring the slippage time required for high and low momentum particles for a grazing touch in line-charge distribution, 2) injecting partial turn… ▽ More We have measured the total energy spread (99 persent energy spread) of the Booster beam at its injection energy of 400 MeV by three different methods - 1) creating a notch of about 40 nsec wide in the beam immediately after multiple turn injection and measuring the slippage time required for high and low momentum particles for a grazing touch in line-charge distribution, 2) injecting partial turn beam and letting it to debunch, and 3) comparing the beam profile monitor data with predictions from MAD simulations for the 400 MeV injection beam line. The measurements are repeated under varieties of conditions of RF systems in the ring and in the beam transfer line. △ Less

Submitted 27 April, 2015; originally announced April 2015.

Comments: 3 Pages, 5 Figures IPAC15 Richmond VA

Report number: FERMILAB-CONF-15-127-AD