Showing 1–9 of 9 results for author: Chandross, M

Linking Order to Strength in Metals

Authors: Nicolas Argibay, Duane D. Johnson, Michael Chandross, Ryan T. Ott, Hailong Huang, Rameshwari Naorem, Gaoyuan Ouyang, Andrey V. Smirnov, Prashant Singh

Abstract: The metallurgy and materials communities have long known and exploited fundamental links between chemical and structural ordering in metallic solids and their mechanical properties. The highest reported strength achievable through the combination of multiple metals (alloying) has rapidly climbed and given rise to new classifications of materials with extraordinary properties. Metallic glasses and… ▽ More The metallurgy and materials communities have long known and exploited fundamental links between chemical and structural ordering in metallic solids and their mechanical properties. The highest reported strength achievable through the combination of multiple metals (alloying) has rapidly climbed and given rise to new classifications of materials with extraordinary properties. Metallic glasses and high-entropy alloys are two limiting examples of how tailored order can be used to manipulate mechanical behavior. Here, we show that the complex electronic-structure mechanisms governing the peak strength of alloys and pure metals can be reduced to a few physically-meaningful parameters based on their atomic arrangements and used (with no fitting parameters) to predict the maximum strength of any metallic solid, regardless of degree of structural or chemical ordering. Predictions of maximum strength based on the activation energy for a stress-driven phase transition to an amorphous state is shown to accurately describe the breakdown in Hall-Petch behavior at the smallest crystallite sizes for pure metals, intermetallic compounds, metallic glasses, and high-entropy alloys. This activation energy is also shown to be directly proportional to interstitial (electronic) charge density, which is a good predictor of ductility, stiffness (moduli), and phase stability in high-entropy alloys, and in solid metals generally. The proposed framework suggests the possibility of coupling ordering and intrinsic strength to mechanisms like dislocation nucleation, hydrogen embrittlement, and transport properties. It additionally opens the prospect for greatly accelerated structural materials design and development to address materials challenges limiting more sustainable and efficient use of energy. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Comments: 16 pages, four figures

Quantifying the Structure of Disordered Materials

Authors: Thomas J. Hardin, Michael Chandross, Rahul Meena, Spencer Fajardo, Dimitris Giovanis, Ioannis G. Kevrekidis, Michael Falk, Michael Shields

Abstract: Durable interest in develo** a framework for the detailed structure of glassy materials has produced numerous structural descriptors that trade off between general applicability and interpretability. However, none approach the combination of simplicity and wide-ranging predictive power of the lattice-grain-defect framework for crystalline materials. Working from the hypothesis that the local ato… ▽ More Durable interest in develo** a framework for the detailed structure of glassy materials has produced numerous structural descriptors that trade off between general applicability and interpretability. However, none approach the combination of simplicity and wide-ranging predictive power of the lattice-grain-defect framework for crystalline materials. Working from the hypothesis that the local atomic environments of a glassy material are constrained by enthalpy minimization to a low-dimensional manifold in atomic coordinate space, we develop a novel generalized distance function, the Gaussian Integral Inner Product (GIIP) distance, in connection with agglomerative clustering and diffusion maps, to parameterize that manifold. Applying this approach to a two-dimensional model crystal and a three-dimensional binary model metallic glass results in parameters interpretable as coordination number, composition, volumetric strain, and local symmetry. In particular, we show that a more slowly quenched glass has a higher degree of local tetrahedral symmetry at the expense of cyclic symmetry. While these descriptors require post-hoc interpretation, they minimize bias rooted in crystalline materials science and illuminate a range of structural trends that might otherwise be missed. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 18 pages, 4 figures

Report number: SAND2022-15908 O

Atomic Origins of Friction Reduction in Metal Alloys

Authors: Shengfeng Cheng, Michael Chandross

Abstract: We present the results of large scale molecular dynamics simulations aimed at understanding the origins of high friction coefficients in pure metals, and their concomitant reduction in alloys and composites. We utilize a series of targeted simulations to demonstrate that different slip mechanisms are active in the two systems, leading to differing frictional behavior. Specifically, we show that in… ▽ More We present the results of large scale molecular dynamics simulations aimed at understanding the origins of high friction coefficients in pure metals, and their concomitant reduction in alloys and composites. We utilize a series of targeted simulations to demonstrate that different slip mechanisms are active in the two systems, leading to differing frictional behavior. Specifically, we show that in pure metals, sliding occurs along the crystallographic slip planes, whereas in alloys shear is accommodated by grain boundaries. In pure metals, there is significant grain growth induced by the applied shear stress and the slip planes are commensurate contacts with high friction. However, the presence of dissimilar atoms in alloys suppresses grain growth and stabilizes grain boundaries, leading to low friction via grain boundary sliding. △ Less

Submitted 6 May, 2021; originally announced May 2021.

Comments: 8 pages, 7 figures, in a Topical Collection of Tribology Letters in memory of Prof. Mark O. Robbins

Journal ref: Tribology Letters 69, 69 (2021)

Linking microstructural evolution and macro-scale friction behavior in metals

Authors: Nicolas Argibay, Michael E. Chandross, Shengfeng Cheng, Joseph R. Michael

Abstract: A correlation is established between the macro-scale friction regimes of metals and a transition between two dominant atomistic mechanisms of deformation. Metals tend to exhibit bi-stable friction behavior -- low and converging or high and diverging. These general trends in behavior are shown to be largely explained using a simplified model based on grain size evolution, as a function of contact s… ▽ More A correlation is established between the macro-scale friction regimes of metals and a transition between two dominant atomistic mechanisms of deformation. Metals tend to exhibit bi-stable friction behavior -- low and converging or high and diverging. These general trends in behavior are shown to be largely explained using a simplified model based on grain size evolution, as a function of contact stress and temperature, and are demonstrated for pure copper and gold. Specifically, the low friction regime is linked to the formation of ultra-nanocrystalline surface films (10 to 20 nm), driving toward shear accommodation by grain boundary sliding. Above a critical combination of stress and temperature -- demonstrated to be a material property -- shear accommodation transitions to dislocation dominated plasticity and high friction. We utilize a combination of experimental and computational methods to develop and validate the proposed structure-property relationship. This quantitative framework provides a shift from phenomenological to mechanistic and predictive fundamental understanding of friction for crystalline materials, including engineering alloys. △ Less

Submitted 24 November, 2016; originally announced November 2016.

Comments: 26 pages, 11 figures

Journal ref: J. Mater. Sci. 52, 2780-2799 (2017)

Forces between functionalized silica nanoparticles in solution

Authors: J. Matthew D. Lane, Ahmed E. Ismail, Michael Chandross, Christian D. Lorenz, Gary S. Grest

Abstract: To prevent the flocculation and phase separation of nanoparticles in solution, nanoparticles are often functionalized with short chain surfactants. Here we present fully-atomistic molecular dynamics simulations which characterize how these functional coatings affect the interactions between nanoparticles and with the surrounding solvent. For 5 nm diameter silica nanoparticles coated with poly(et… ▽ More To prevent the flocculation and phase separation of nanoparticles in solution, nanoparticles are often functionalized with short chain surfactants. Here we present fully-atomistic molecular dynamics simulations which characterize how these functional coatings affect the interactions between nanoparticles and with the surrounding solvent. For 5 nm diameter silica nanoparticles coated with poly(ethylene oxide) (PEO) oligomers in water, we determined the hydrodynamic drag on two approaching nanoparticles moving through solvent and on a single nanoparticle as it approaches a planar surface. In most circumstances, acroscale fluid theory accurately predicts the drag on these nano-scale particles. Good agreement is seen with Brenner's analytical solutions for wall separations larger than the soft nanoparticle radius. For two approaching coated nanoparticles, the solvent-mediated (velocity-independent) and lubrication (velocity-dependent) forces are purely repulsive and do not exhibit force oscillations that are typical of uncoated rigid spheres. △ Less

Submitted 16 April, 2009; originally announced April 2009.

Comments: 4 pages, 3 figs

Density functional theory and DFT+U study of transition metal porphines adsorbed on Au(111) surfaces and effects of applied electric fields

Authors: Kevin Leung, Susan B. Rempe, Peter A. Schultz, Eduardo M. Sproviero, Victor S. Batista, Michael E. Chandross, Craig J. Medforth

Abstract: We apply Density Functional Theory (DFT) and the DFT+U technique to study the adsorption of transition metal porphine molecules on atomistically flat Au(111) surfaces. DFT calculations using the Perdew-Burke-Ernzerhof (PBE) exchange correlation functional correctly predict the palladium porphine (PdP) low-spin ground state. PdP is found to adsorb preferentially on gold in a flat geometry, not in… ▽ More We apply Density Functional Theory (DFT) and the DFT+U technique to study the adsorption of transition metal porphine molecules on atomistically flat Au(111) surfaces. DFT calculations using the Perdew-Burke-Ernzerhof (PBE) exchange correlation functional correctly predict the palladium porphine (PdP) low-spin ground state. PdP is found to adsorb preferentially on gold in a flat geometry, not in an edgewise geometry, in qualitative agreement with experiments on substituted porphyrins. It exhibits no covalent bonding to Au(111), and the binding energy is a small fraction of an eV. The DFT+U technique, parameterized to B3LYP predicted spin state ordering of the Mn d-electrons, is found to be crucial for reproducing the correct magnetic moment and geometry of the isolated manganese porphine (MnP) molecule. Adsorption of Mn(II)P on Au(111) substantially alters the Mn ion spin state. Its interaction with the gold substrate is stronger and more site-specific than PdP. The binding can be partially reversed by applying an electric potential, which leads to significant changes in the electronic and magnetic properties of adsorbed MnP, and ~ 0.1 Angstrom, changes in the Mn-nitrogen distances within the porphine macrocycle. We conjecture that this DFT+U approach may be a useful general method for modeling first row transition metal ion complexes in a condensed-matter setting. △ Less

Submitted 26 October, 2006; originally announced October 2006.

Comments: 14 pages, 6 figures

Journal ref: Journal of the American Chemical Society 128:3659 (2006)

Designing pi-conjugated polymers with light emission in the infrared

Authors: S. Mazumdar, S. Dallakyan, M. Chandross

Abstract: There is currently a great need for solid state lasers that emit in the infrared. Whether or not conjugated polymers that emit in the IR can be synthesized is an interesting theoretical challenge. We show that emission in the IR can be achieved in designer polymers in which the effective Coulomb correlation is smaller than that in existing systems. We also show that the structural requirement fo… ▽ More There is currently a great need for solid state lasers that emit in the infrared. Whether or not conjugated polymers that emit in the IR can be synthesized is an interesting theoretical challenge. We show that emission in the IR can be achieved in designer polymers in which the effective Coulomb correlation is smaller than that in existing systems. We also show that the structural requirement for having small effective Coulomb correlations is that there exist transverse $π$--conjugation over a few bonds in addition to longitudinal conjugation with large conjugation lengths. △ Less

Submitted 21 March, 2003; originally announced March 2003.

Prediction of infrared light emission from pi-conjugated polymers: a diagrammatic exciton basis valence bond theory

Authors: S. Dallakyan, M. Chandross, S. Mazumdar

Abstract: There is currently a great need for solid state lasers that emit in the infrared, as this is the operating wavelength regime for applications in telecommunications. Existing $π$--conjugated polymers all emit in the visible or ultraviolet, and whether or not $π$--conjugated polymers that emit in the infrared can be designed is an interesting challenge. On the one hand, the excited state ordering… ▽ More There is currently a great need for solid state lasers that emit in the infrared, as this is the operating wavelength regime for applications in telecommunications. Existing $π$--conjugated polymers all emit in the visible or ultraviolet, and whether or not $π$--conjugated polymers that emit in the infrared can be designed is an interesting challenge. On the one hand, the excited state ordering in trans-polyacetylene, the $π$--conjugated polymer with relatively small optical gap, is not conducive to light emission because of electron-electron interaction effects. On the other hand, excited state ordering opposite to that in trans-polyacetylene is usually obtained by chemical modification that increases the effective bond-alternation, which in turn increases the optical gap. We develop a theory of electron correlation effects in a model $π$-conjugated polymer that is obtained by replacing the hydrogen atoms of trans-polyacetylene with transverse conjugated groups, and show that the effective on-site correlation in this system is smaller than the bare correlation in the unsubstituted system. An optical gap in the infrared as well as excited state ordering conducive to light emission is thereby predicted upon similar structural modifications. △ Less

Submitted 9 October, 2002; originally announced October 2002.

Comments: 15 pages, 15 figures, 1 table

Electron-hole versus exciton delocalization in conjugated polymers: the role of topology

Authors: S. Dallakyan, M. Chandross, S. Mazumdar

Abstract: There is currently a great need for solid state lasers that emit in the infrared. Whether or not conjugated polymers that emit in the IR can be synthesized is an interesting theoretical challenge. We show that the requirement for such a material is that the exciton delocalization in the system be large, such that the optical gap is small. We develop a theory of exciton delocalization in conjugat… ▽ More There is currently a great need for solid state lasers that emit in the infrared. Whether or not conjugated polymers that emit in the IR can be synthesized is an interesting theoretical challenge. We show that the requirement for such a material is that the exciton delocalization in the system be large, such that the optical gap is small. We develop a theory of exciton delocalization in conjugated polymers, and show that the extent of this can be predicted from the topology of the conjugated polymer in question. We determine the precise structural characteristics that would be necessary for light emission in the IR. △ Less

Submitted 7 August, 2002; originally announced August 2002.

Comments: 2 pages, 2 figures, submitted to Synthetic Metals