-
Review on physical impedance models in perovskite solar cells
Authors:
Rajat Kumar Goyal,
M. Chandrasekhar
Abstract:
The significant advancements in perovskite solar cell (PSC) research and development have reignited optimism for the practicality of solar energy. A deeper comprehension of the fundamental mechanisms is essential for enhancing the current solar technology. Impedance spectroscopy (IS) characterization, in conjunction with other analytical methods, stands out as the primary approach for gaining insi…
▽ More
The significant advancements in perovskite solar cell (PSC) research and development have reignited optimism for the practicality of solar energy. A deeper comprehension of the fundamental mechanisms is essential for enhancing the current solar technology. Impedance spectroscopy (IS) characterization, in conjunction with other analytical methods, stands out as the primary approach for gaining insights into the internal workings of solar cells. The continuous analysis and refinement of electrochemical spectroscopy data for PSCs have unveiled intricate operational details. Despite the ongoing improvements, the absence of a centralized repository for this information poses challenges for tracking progress effectively. This review paper aims to consolidate the physical phenomena behind the development of PSC research, aiming to establish a comprehensive knowledge base on impedance plots, equivalent circuits, and related processes.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Effect of cobalt substitution on structural, impedance, ferroelectric and magnetic properties of multiferroic Bi_2Fe_4O_9 ceramics
Authors:
S. R. Mohapatra,
B. Sahu,
M. Chandrasekhar,
P. Kumar,
S. D. Kaushik,
S. Rath,
A. K. Singh
Abstract:
Structural, impedance, ferroelectric and magnetic properties were examined in multiferroic Bi_{2}Fe_{4(1-x)}Co_{4x}O_{9} (0$\leq$x$\leq$0.02) ceramics synthesized via solid-state reaction method. X-ray diffraction analysis and Rietveld refinement showed secondary phase formation (for x$\geq$0.01) which was subsequently confirmed from room temperature Raman spectroscopy study. The frequency depende…
▽ More
Structural, impedance, ferroelectric and magnetic properties were examined in multiferroic Bi_{2}Fe_{4(1-x)}Co_{4x}O_{9} (0$\leq$x$\leq$0.02) ceramics synthesized via solid-state reaction method. X-ray diffraction analysis and Rietveld refinement showed secondary phase formation (for x$\geq$0.01) which was subsequently confirmed from room temperature Raman spectroscopy study. The frequency dependence of impedance and electric modulus of the material showed the presence of non-Debye type relaxation in all the samples. The values of the activation energies calculated from imaginary impedance and modulus lie in the range of 0.92-0.99 eV which confirmed that the oxygen vacancies play an important role in the conduction mechanism. Moreover, suitable amount of Co substitution significantly enhanced the remnant polarisation (2P_{r}) from 0.1193 $μ$C/cm^{2} (x=0) to 0.2776 $μ$C/cm^{2} (x=0.02). Besides, room temperature M-H measurement showed improved ferromagnetic hysteresis loop for all the modified samples. The remnant magnetization (M_{r}) and coercive field (H_{c}) increased from 0.0007 emu/gm and 42 Oe for x=0 to 0.1401 emu/gm and 296 Oe for x=0.02. The improved ferroelectricity was due to Co 3d-O 2p hybridization and enhanced magnetization originated from the partial substitution of Co^{3+} ions leading to breakdown of balance between the anti-parallel sub lattice magnetization of Fe^{3+} ions.
△ Less
Submitted 5 May, 2016;
originally announced May 2016.
-
High growth rate 4H-SiC epitaxial growth using dichlorosilane in a hot-wall CVD reactor
Authors:
Iftekhar Chowdhury,
MVS Chandrasekhar,
Paul B Klein,
Joshua D. Caldwell,
Tangali Sudarshan
Abstract:
Thick, high quality 4H-SiC epilayers have been grown in a vertical hot-wall chemical vapor deposition system at a high growth rate on (0001) 80 off-axis substrates. We discuss the use of dichlorosilane as the Si-precursor for 4H-SiC epitaxial growth as it provides the most direct decomposition route into SiCl2, which is the predominant growth species in chlorinated chemistries. A specular surface…
▽ More
Thick, high quality 4H-SiC epilayers have been grown in a vertical hot-wall chemical vapor deposition system at a high growth rate on (0001) 80 off-axis substrates. We discuss the use of dichlorosilane as the Si-precursor for 4H-SiC epitaxial growth as it provides the most direct decomposition route into SiCl2, which is the predominant growth species in chlorinated chemistries. A specular surface morphology was attained by limiting the hydrogen etch rate until the system was equilibrated at the desired growth temperature. The RMS roughness of the grown films ranged from 0.5-2.0 nm with very few morphological defects (carrots, triangular defects, etc.) being introduced, while enabling growth rates of 30-100 \mum/hr, 5-15 times higher than most conventional growths. Site-competition epitaxy was observed over a wide range of C/Si ratios, with do** concentrations < 1x1014 cm-3 being recorded. X-ray rocking curves indicated that the epilayers were of high crystallinity, with linewidths as narrow as 7.8 arcsec being observed, while microwave photoconductive decay (\muPCD) measurements indicated that these films had high injection (ambipolar) carrier lifetimes in the range of 2 \mus.
△ Less
Submitted 3 November, 2010;
originally announced November 2010.
-
Tuning intermolecular interactions in di-octyl substituted polyfluorene via hydrostatic pressure
Authors:
K. Paudel,
M. Chandrasekhar,
S. Guha
Abstract:
Polyfluorenes (PFs) represent a unique class of poly para-phenylene based blue-emitting polymers with intriguing structure-property relationships. Slight variations in the choice of functionalizing side chains result in dramatic differences in the inter- and intra-chain structures in PFs. We present photoluminescence (PL) and Raman scattering studies of bulk samples and thin films of dioctyl-sub…
▽ More
Polyfluorenes (PFs) represent a unique class of poly para-phenylene based blue-emitting polymers with intriguing structure-property relationships. Slight variations in the choice of functionalizing side chains result in dramatic differences in the inter- and intra-chain structures in PFs. We present photoluminescence (PL) and Raman scattering studies of bulk samples and thin films of dioctyl-substituted PF (PF8) under hydrostatic pressure. The bulk sample was further thermally annealed at 1.9 GPa. The PL vibronics of the as-is sample red-shift at an average rate of 26 meV/GPa. The thermally annealed sample is characterized by at least two phase transitions at 1.1 GPa and 4.2 GPa, each of which has a different pressure coefficient for PL vibronics. The Huang-Rhys factor, a measure of the electron-phonon interaction, is found to increase with increasing pressures signaling a higher geometric relaxation of the electronic states. The Raman peaks harden with increasing pressures; the intra-ring C-C stretch frequency at 1600 cm$^{-1}$ has a pressure coefficient of 7.2 cm$^{-1}$/GPa and exhibits asymmetric line shapes at higher pressures, characteristic of a strong electron-phonon interaction. The optical properties of PF8 under high pressure are further contrasted with those of a branched side chain substituted PF.
△ Less
Submitted 11 May, 2009;
originally announced May 2009.
-
Pressure Raman effects and internal stress in network glasses
Authors:
Fei Wang,
S. Mamedov,
P. Boolchand,
B. Goodman,
Meera Chandrasekhar
Abstract:
Raman scattering from binary GexSe1-x glasses under hydrostatic pressure shows onset of a steady increase in the frequency of modes of corner-sharing GeSe4 tetrahedral units when the external pressure P exceeds a threshold value Pc. The threshold pressure Pc(x) decreases with x in the 0.15 < x < 0.20 range, nearly vanishes in the 0.20 < x < 0.25 range, and then increases in the 0.25 < x < 1/3 ra…
▽ More
Raman scattering from binary GexSe1-x glasses under hydrostatic pressure shows onset of a steady increase in the frequency of modes of corner-sharing GeSe4 tetrahedral units when the external pressure P exceeds a threshold value Pc. The threshold pressure Pc(x) decreases with x in the 0.15 < x < 0.20 range, nearly vanishes in the 0.20 < x < 0.25 range, and then increases in the 0.25 < x < 1/3 range. These Pc(x) trends closely track those in the non-reversing enthalpy, DHnr(x), near glass transitions (Tgs), and in particular, both DHnr(x) and Pc(x) vanish in the reversibility window (0.20 < x < 0.25). It is suggested that Pc provides a measure of stress at the Raman active units; and its vanishing in the reversibility window suggests that these units are part of an isostatically rigid backbone. Isostaticity also accounts for the non-aging behavior of glasses observed in the reversibility window.
△ Less
Submitted 27 September, 2007;
originally announced September 2007.
-
Pressure Raman Effects and Internal Stress in Network Glasses
Authors:
Fei Wang,
Sergey Mamedov,
P. Boolchand,
B. Goodman,
Meera Chandrasekhar
Abstract:
Raman scattering from binary GexSe1-x glasses under hydrostatic pressure shows onset of a steady increase in the frequency of modes of corner-sharing GeSe4 tetrahedral units when the external pressure P exceeds a threshold value Pc. The threshold pressure Pc(x) decreases with x in the 0.15 < x < 0.20 range, nearly vanishes in the 0.20 < x < 0.25 range, and then increases in the 0.25 < x < 1/3 ra…
▽ More
Raman scattering from binary GexSe1-x glasses under hydrostatic pressure shows onset of a steady increase in the frequency of modes of corner-sharing GeSe4 tetrahedral units when the external pressure P exceeds a threshold value Pc. The threshold pressure Pc(x) decreases with x in the 0.15 < x < 0.20 range, nearly vanishes in the 0.20 < x < 0.25 range, and then increases in the 0.25 < x < 1/3 range. These Pc(x) trends closely track those in the non-reversing enthalpy, DeltaHnr(x), near glass transitions (Tgs), and in particular, both DeltaHnr(x) and Pc(x) vanish in the reversibility window (0.20 < x < 0.25). It is suggested that Pc provides a measure of stress at the Raman active units; and its vanishing in the reversibility window suggests that these units are part of an isostatically rigid backbone. Isostaticity also accounts for the non-aging behavior of glasses observed in the reversibility window.
△ Less
Submitted 11 March, 2005; v1 submitted 23 August, 2004;
originally announced August 2004.
-
Hydrostatic pressure dependence of the luminescence and Raman frequencies in polyfluorene
Authors:
C. M. Martin,
S. Guha,
M. Chandrasekhar,
H. R. Chandrasekhar,
R. Guentner,
P. Scanduicci de Freitas,
U. Scherf
Abstract:
We present studies of the photoluminescence (PL), absorption and Raman scattering from poly[2,7-(9,9'-bis(2-ethylhexyl))fluorene] under hydrostatic pressures of 0-100 kbar at room temperature. The well-defined PL and associated vibronics that are observed at atmospheric pressure change dramatically around 20 kbar in the bulk sample and at around 35 kbar for the thin film sample. Beyond these pre…
▽ More
We present studies of the photoluminescence (PL), absorption and Raman scattering from poly[2,7-(9,9'-bis(2-ethylhexyl))fluorene] under hydrostatic pressures of 0-100 kbar at room temperature. The well-defined PL and associated vibronics that are observed at atmospheric pressure change dramatically around 20 kbar in the bulk sample and at around 35 kbar for the thin film sample. Beyond these pressures the PL emission from the backbone is swamped by strong peaks due to aggregates and keto defects in the 2.1-2.6 eV region. The Raman peaks shift to higher energies and exhibit unexpected antiresonance lineshapes at higher pressures, indicating a strong electron-phonon interaction.
△ Less
Submitted 16 January, 2003;
originally announced January 2003.
-
Temperature dependent photoluminescence of organic semiconductors with varying backbone conformation
Authors:
S. Guha,
J. D. Rice,
Y. T. Yau,
C. M. Martin,
M. Chandrasekhar,
H. R. Chandrasekhar,
R. Guentner,
P. Scandiucci de Freitas,
U. Scherf
Abstract:
We present photoluminescence studies as a function of temperature from a series of conjugated polymers and a conjugated molecule with distinctly different backbone conformations. The organic materials investigated here are: planar methylated ladder type poly para-phenylene, semi-planar polyfluorene, and non-planar para hexaphenyl. In the longer-chain polymers the photoluminescence transition ene…
▽ More
We present photoluminescence studies as a function of temperature from a series of conjugated polymers and a conjugated molecule with distinctly different backbone conformations. The organic materials investigated here are: planar methylated ladder type poly para-phenylene, semi-planar polyfluorene, and non-planar para hexaphenyl. In the longer-chain polymers the photoluminescence transition energies blue shift with increasing temperatures. The conjugated molecules, on the other hand, red shift their transition energies with increasing temperatures. Empirical models that explain the temperature dependence of the band gap energies in inorganic semiconductors can be extended to explain the temperature dependence of the transition energies in conjugated molecules.
△ Less
Submitted 18 June, 2002;
originally announced June 2002.
