Showing 1–6 of 6 results for author: Chandran, R B

Assessing the Value of Coupling Thermal Energy Storage with Air-Source Heat Pumps for Residential Space Heating in U.S. Cities

Authors: An T. Pham, Bryan Kinzer, Ritvik Jain, Rohini Bala Chandran, Michael T. Craig

Abstract: Widespread air source heat pump (ASHP) adoption faces several challenges that on-site thermal energy storage (TES), particularly thermochemical salt hydrate TES, can mitigate. No techno-economic analyses for salt-hydrate-based TES in residential applications exist. We quantify the residential space heating value of four salt hydrate TES materials - MgSO4, MgCl2, K2CO3, and SrBr2 - coupled with ASH… ▽ More Widespread air source heat pump (ASHP) adoption faces several challenges that on-site thermal energy storage (TES), particularly thermochemical salt hydrate TES, can mitigate. No techno-economic analyses for salt-hydrate-based TES in residential applications exist. We quantify the residential space heating value of four salt hydrate TES materials - MgSO4, MgCl2, K2CO3, and SrBr2 - coupled with ASHPs across 4,800 representative households in 12 U.S. cities by embedding salt-hydrate-specific Ragone plots into a techno-economic model of coupled ASHP-TES operations. In Detroit, salt hydrate TES is projected to reduce household annual electricity costs by up to $\$$241 (8$\%$). Cost savings from TES can differ by over an order of magnitude between households and salt hydrates. We identify the most promising salt in this study, SrBr2, due to its high energy density and low humidification parasitic load. Break-even capital costs of SrBr2-based TES range from $\$$13/kWh to $\$$17/kWh, making it the only salt hydrate studied to reach and exceed the U.S. Department of Energy's $\$$15/kWh TES cost target. Sensitivities highlight the importance of variable TES sizing and efficiency losses in the value of TES. △ Less

Submitted 29 June, 2024; originally announced July 2024.

Conductive and Radiative Heat Transfer Mechanisms Inform Nusselt Number Dependence on Solid Volume Fraction for Granular Flows

Authors: Bingjia Li, Zijie Chen, Rohini Bala Chandran

Abstract: Granular flows with solid particles play an important role in energy and catalysis applications. To predict thermal performance, this study develops a comprehensive discrete particle tracking flow model fully coupled with conductive and radiative heat transfer. Leveraging LIGGGHTS, our model uniquely integrates particle-particle and particle-wall thermal radiation for grey radiative surfaces up to… ▽ More Granular flows with solid particles play an important role in energy and catalysis applications. To predict thermal performance, this study develops a comprehensive discrete particle tracking flow model fully coupled with conductive and radiative heat transfer. Leveraging LIGGGHTS, our model uniquely integrates particle-particle and particle-wall thermal radiation for grey radiative surfaces up to nearly 10 times of particle size. Models include: (a) plug flows of particles with a near-constant streamwise velocity and (b) gravity-driven, dense, moving beds of particles to determine wall-to-particle heat-transfer coefficients with isothermal channel walls. The plug flow model is used to interrogate the interdependent effects of flow-regime-dependent solid volume fractions (0.02 -- 0.48), particle size (0.4 -- 1 mm), operating wall temperatures (700 -- 1300 K), and thermophysical particles properties including emissivity (0.1 -- 1) and thermal conductivity (0.16, 33 W/m/K). The overall and conductive heat-transfer coefficients increase with solid volume fraction, while radiation contribution decreases. For a fixed solid volume fraction, heat-transfer coefficients exhibit linear dependence on particle emissivity and cubic dependence on wall temperature, driven by enhanced thermal radiation. For a fixed mass flow rate, the dependence of radiative heat-transfer coefficient on particle size changes with solid volume fraction. To generalize the applicability of our results, heat-transfer coefficients are transformed into a dimensionless Nusselt number, and establish its dependence on solid volume fraction. These results reveal the high sensitivity of the overall Nusselt number to even small changes in solid volume fraction in the dense flow regime, particularly for the high-conductivity alumina particles. In contrast, the radiative Nusselt number asymptotes for large solid volume fractions. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO2-induced Corrosion via Oxidation and Carburization in Fe, Ni alloys

Authors: Aditya Sundar, Aaron Feinauer, Bryan Kinzer, Joerg Petrasch, Liang Qi, Rohini Bala Chandran

Abstract: A computational framework integrating thermodynamics, kinetics, and mechanical stress calculations is developed to study supercritical CO2 induced corrosion in model Fe-based MA956 and Ni-based H214 alloys. Empirical models parametrized using experimental data show surface oxidation and sub-surface carburization for a wide range of thermodynamic conditions (800-1200 °C, 1-250 bar). CALPHAD simulat… ▽ More A computational framework integrating thermodynamics, kinetics, and mechanical stress calculations is developed to study supercritical CO2 induced corrosion in model Fe-based MA956 and Ni-based H214 alloys. Empirical models parametrized using experimental data show surface oxidation and sub-surface carburization for a wide range of thermodynamic conditions (800-1200 °C, 1-250 bar). CALPHAD simulations based on empirical models demonstrate higher carburization resistance in H214 compared to MA956 below 900 °C and through-thickness carburization in both alloys at higher temperatures. Finite element modeling reveals enhanced volumetric misfit induced stresses at oxide and carbide interfaces, and its critical dependence on the carbide chemistry and concentration. △ Less

Submitted 31 May, 2023; originally announced June 2023.

Radiative View Factor Correlations in Particulate Media from Ray Tracing Simulations and Data-Driven Modeling

Authors: Zijie Chen, Rohini Bala Chandran

Abstract: Thermal radiation in particulate media has been extensively modeled by solving the radiative transport equation with effective radiative properties or with statistical ray tracing techniques. While effective for static particles, this approach is not compatible with the more common discrete formulation of heat fluxes in particle flow systems. This study focuses on such a discrete approach to compu… ▽ More Thermal radiation in particulate media has been extensively modeled by solving the radiative transport equation with effective radiative properties or with statistical ray tracing techniques. While effective for static particles, this approach is not compatible with the more common discrete formulation of heat fluxes in particle flow systems. This study focuses on such a discrete approach to compute radiative fluxes by develo** view factors correlations. Training data is generated from physics-based Monte Carlo ray tracing simulations on a monodisperse, packed bed with solid volume fractions ranging from 0.016 to 0.45. This data was used to develop reduced-order correlations to determine particle-particle and particle-wall radiative view factors as a function of particle-particle and particle-wall separation distance, viewing angle, and the number of shading particles. Uniquely, we determine best-fit functions that are physically interpretable to account for shading effects by particles. A sigmoid function with a non-linear dependence on viewing angle governs the extent of shading cast by an intermediate particle. To scale the net contribution of shading by intermediate particles between a particle and a planar wall, a particle-wall correction factor that is dependent quadratically on the particle-wall normal separation distance serves to be effective. View factor correlations result in reliable and reasonably accurate predictions. For a solid volume fraction of 0.45, the root mean squared errors of particle-particle and particle-wall view factors are 2.7e-4 and 0.021 with data in the ranges of 0-0.08 and 0-0.5 respectively. With thousands of particles, the computational cost of proposed correlations with thresholding of 5 shading particles is about 100 times faster than serial Monte Carlo ray tracing simulations for a solid volume fraction of 0.45. △ Less

Submitted 13 December, 2022; originally announced April 2023.

A Phase-Field Study on the Effects of Nanoparticles on Solidification and Grain Growth

Authors: Bryan Kinzer, Rohini Bala Chandran

Abstract: Nanoparticle reinforced alloys offer the potential of high strength, high temperature alloys. While promising, during rapid solidification processes, alloys suffer from nanoparticle clustering, which can discount any strength benefit. An open-source phase-field model is developed using PRISMS-PF to explore the impact of nanoparticles and clustering on alloy solidification. Heterogenous nucleation… ▽ More Nanoparticle reinforced alloys offer the potential of high strength, high temperature alloys. While promising, during rapid solidification processes, alloys suffer from nanoparticle clustering, which can discount any strength benefit. An open-source phase-field model is developed using PRISMS-PF to explore the impact of nanoparticles and clustering on alloy solidification. Heterogenous nucleation and grain boundary pinning are explicitly included, and a wide range of nanoparticle area fractions and nucleation rates are modeled. At low area fractions less than 0.05, particle clustering increases grain size between 15-45% compared to a random distribution. Our quantitative analyses inform a modified Zener grain size relationship that not only depends on nanoparticle size and area fraction, but also on the nucleation rate. Grain size first drastically decreases before plateauing at higher nucleation rates. Our simulations reveal a strong preference of nanoparticles pinning grain boundaries. Pinning fraction increases rapidly with nucleation rate before saturating between 0.85-0.90. Across the range of area fractions and nucleation rates considered, the random and clustered grain sizes each collapse to a simple analytical expression that depends only on nanoparticle radius and pinning fraction. Comparisons against experimental data reveal the expressions deduced from our analyses fit reported grain sizes better than classic Zener analysis. A simple model of strength and cost tradeoffs indicates nanoparticles can be a cost-effective way to improve alloy strength. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Temperature-Dependent Diffuse Reflectance Measurements of Ceramic Powders in the Near- and Mid-Infrared Spectra

Authors: J. Michael Mayer, James A. Abraham, Bryan Kinzer, Rohini Bala Chandran

Abstract: This study focuses on experimentally measuring temperature-dependent diffuse reflectance in the near- and mid-infrared spectra for ceramic particles with applications as heat-transfer and thermal-storage media in concentrated solar power (CSP) plants. Specifically, a commercially available sintered bauxite ceramic powder, ACCUCAST ID80, and its primary chemical constituents, alumina (Al2O3) and si… ▽ More This study focuses on experimentally measuring temperature-dependent diffuse reflectance in the near- and mid-infrared spectra for ceramic particles with applications as heat-transfer and thermal-storage media in concentrated solar power (CSP) plants. Specifically, a commercially available sintered bauxite ceramic powder, ACCUCAST ID80, and its primary chemical constituents, alumina (Al2O3) and silica (SiO2), are measured using a Fourier transform infrared spectrometer (FTIR) coupled with a specialized diffuse reflectance accessory and a heated stage. Room-temperature diffuse reflectance measurements show increased absorption in tests with greater mass fractions of the ceramic samples. There is a strong correlation in the measured reflectance spectra of ACCUCAST with alumina and silica in the spectral range 2000-500 cm-1. For the first time, temperature-dependent diffuse reflectance measurements are reported for ACCUCAST, including a novel technique for accessing reflectance values above the limiting temperature of the background material KBr. All three materials exhibit a calculated emittance of ~0.9 at room temperature. However, this value drops to 0.68 at 1000 C for ACCUCAST and ~0.43 for alumina and silica. Thermal cycling in air from 25 C to 1000 C resulted in a visible color change from dark grey to light orange for ACCUCAST and a subsequent 5X greater increase in reflectance at 4000 cm-1 as compared to ACCUCAST thermally cycled at 1000 C in vacuum. Alumina and silica spectra proved to be largely unaffected by thermal cycling under atmospheric and evacuated conditions. △ Less

Submitted 13 April, 2022; originally announced April 2022.