Showing 1–49 of 49 results for author: Chafii, M

Layered Chirp Spread Spectrum Modulations for LPWANs

Authors: Ali Waqar Azim, Ahmad Bazzi, Roberto Bomfin, Raed Shubair, Marwa Chafii

Abstract: This article examines two chirp spread spectrum techniques specifically devised for low-power wide-area networks (LPWANs) to optimize energy and spectral efficiency (SE). These methods referred to as layered CSS (LCSS) and layered dual-mode CSS (LDMCSS), involves utilizing multiple layers for multiplexing symbols with varying chirp rates. These waveform designs exemplify a high degree of SE compar… ▽ More This article examines two chirp spread spectrum techniques specifically devised for low-power wide-area networks (LPWANs) to optimize energy and spectral efficiency (SE). These methods referred to as layered CSS (LCSS) and layered dual-mode CSS (LDMCSS), involves utilizing multiple layers for multiplexing symbols with varying chirp rates. These waveform designs exemplify a high degree of SE compared to existing schemes. Additionally, LDMCSS necessitates a lesser number of layers than LCSS to attain comparable SE, thereby reducing computational complexity. These proposed techniques can employ coherent and non-coherent detection and can be adjusted to achieve various spectral efficiencies by altering the number of multiplexed layers. Unlike our proposed LCSS and LDMCSS, other CSS alternatives for LPWANs cannot provide the same level of flexibility and SE. The performance of these techniques is evaluated in terms of bit error rate under different channel conditions, as well as with phase and frequency offsets. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Journal ref: IEEE Transactions on Communications, Vol 72, Issue 3, March 2024

Impact of Network Geometry on Large Networks with Intelligent Reflecting Surfaces

Authors: Konpal Shaukat Ali, Martin Haenggi, Arafat Al-Dweik, Marwa Chafii

Abstract: In wireless networks assisted by intelligent reflecting surfaces (IRSs), jointly modeling the signal received over the direct and indirect (reflected) paths is a difficult problem. In this work, we show that the network geometry (locations of serving base station, IRS, and user) can be captured using the so-called triangle parameter $Δ$. We introduce a decomposition of the effect of the combined l… ▽ More In wireless networks assisted by intelligent reflecting surfaces (IRSs), jointly modeling the signal received over the direct and indirect (reflected) paths is a difficult problem. In this work, we show that the network geometry (locations of serving base station, IRS, and user) can be captured using the so-called triangle parameter $Δ$. We introduce a decomposition of the effect of the combined link into a signal amplification factor and an effective channel power coefficient $G$. The amplification factor is monotonically increasing with both the number of IRS elements $N$ and $Δ$. For $G$, since an exact characterization of the distribution seems unfeasible, we propose three approximations depending on the value of the product $NΔ$ for Nakagami fading and the special case of Rayleigh fading. For two relevant models of IRS placement, we prove that their performance is identical if $Δ$ is the same given an $N$. We also show that no gains are achieved from IRS deployment if $N$ and $Δ$ are both small. We further compute bounds on the diversity gain to quantify the channel hardening effect of IRSs. Hence only with a judicious selection of IRS placement and other network parameters, non-trivial gains can be obtained. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Successive Interference Cancellation for ISAC in a Large Full-Duplex Cellular Network

Authors: Konpal Shaukat Ali, Roberto Bomfin, Marwa Chafii

Abstract: To reuse the scarce spectrum efficiently, a large full-duplex cellular network with integrated sensing and communication (ISAC) is studied. Monostatic detection at the base station (BS) is considered. At the BS, we receive two signals: the communication-mode uplink signal to be decoded and the radar-mode signal to be detected. After self-interference cancellation (SIC), inspired by NOMA, successiv… ▽ More To reuse the scarce spectrum efficiently, a large full-duplex cellular network with integrated sensing and communication (ISAC) is studied. Monostatic detection at the base station (BS) is considered. At the BS, we receive two signals: the communication-mode uplink signal to be decoded and the radar-mode signal to be detected. After self-interference cancellation (SIC), inspired by NOMA, successive interference cancellation (SuIC) is a natural strategy at the BS to retrieve both signals. However, the ordering of SuIC, usually based on some measure of channel strength, is not clear as the radar-mode target is unknown. The detection signal suffers a double path-loss making it vulnerable, but the uplink signal to be decoded originates at a user which has much lower power than the BS making it weak as well. Further, the intercell interference from a large network reduces the channel disparity between the two signals. We investigate the impact of both SuIC orders at the BS, i.e., decoding $1^{st}$ or detecting $1^{st}$ and highlight the importance of careful order selection. We find the existence of a threshold target distance before which detecting $1^{st}$ is superior and decoding $2^{nd}$ does not suffer much. After this distance, both decoding $1^{st}$ and detecting $2^{nd}$ is superior. Similarly, a threshold UE power exists after which the optimum SuIC order changes. We consider imperfections in SIC; this helps highlight the vulnerability of the decoding and detection in the setup. △ Less

Submitted 30 April, 2024; originally announced May 2024.

Complex Neural Network based Joint AoA and AoD Estimation for Bistatic ISAC

Authors: Salmane Naoumi, Ahmad Bazzi, Roberto Bomfin, Marwa Chafii

Abstract: Integrated sensing and communication (ISAC) in wireless systems has emerged as a promising paradigm, offering the potential for improved performance, efficient resource utilization, and mutually beneficial interactions between radar sensing and wireless communications, thereby sha** the future of wireless technologies. In this work, we present two novel methods to address the joint angle of arri… ▽ More Integrated sensing and communication (ISAC) in wireless systems has emerged as a promising paradigm, offering the potential for improved performance, efficient resource utilization, and mutually beneficial interactions between radar sensing and wireless communications, thereby sha** the future of wireless technologies. In this work, we present two novel methods to address the joint angle of arrival and angle of departure estimation problem for bistatic ISAC systems. Our proposed methods consist of a deep learning (DL) solution leveraging complex neural networks, in addition to a parameterized algorithm. By exploiting the estimated channel matrix and incorporating a preprocessing step consisting of a coarse timing estimation, we are able to notably reduce the input size and improve the computational efficiency. In our findings, we emphasize the remarkable potential of our DL-based approach, which demonstrates comparable performance to the parameterized method that explicitly exploits the multiple-input multiple-output (MIMO) model, while exhibiting significantly lower computational complexity. △ Less

Submitted 31 March, 2024; originally announced April 2024.

Comments: IEEE Journal of Selected Topics in Signal Processing

A System Level Analysis for Integrated Sensing and Communication

Authors: Roberto Bomfin, Konpal Shaukat Ali, Marwa Chafii

Abstract: In this work, we provide a system level analysis of integrated sensing and communication (ISAC) systems, where a setup with a mono-static dual-functional radar communication base station is assumed. We derive the ISAC signal-to-noise ratio (SNR) equation that relates communication and radar SNR for different distances. We also derive the ISAC range equation, which can be used for sensing-assisted… ▽ More In this work, we provide a system level analysis of integrated sensing and communication (ISAC) systems, where a setup with a mono-static dual-functional radar communication base station is assumed. We derive the ISAC signal-to-noise ratio (SNR) equation that relates communication and radar SNR for different distances. We also derive the ISAC range equation, which can be used for sensing-assisted beamforming applications. Specifically, we show that increasing the frequency and bandwidth is more favorable to the radar application in terms of relative SNR and range while increasing the transmit power is more favorable to communications. Numerical examples reveal that if the range for communication and radar is desired to be in the same order, the ISAC system should operate in mmWave or sub-THz bands, whereas sub-6GHz allows scenarios where the communication range is of orders of magnitude higher than that of radar. △ Less

Submitted 5 February, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

On the Performance Analysis of Zero-Padding OFDM for Monostatic ISAC Systems

Authors: Roberto Bomfin, Marwa Chafii

Abstract: This paper considers an integrated sensing and communication (ISAC) system with monostatic radar functionality using a zero-padding orthogonal frequency division multiplexing (ZP-OFDM) downlink transmission. We focus on ISAC's sensing aspect, employing an energy-detection (ED) method. The ZP-OFDM transmission is motivated by the fact that sensing can be performed during the silent periods of the t… ▽ More This paper considers an integrated sensing and communication (ISAC) system with monostatic radar functionality using a zero-padding orthogonal frequency division multiplexing (ZP-OFDM) downlink transmission. We focus on ISAC's sensing aspect, employing an energy-detection (ED) method. The ZP-OFDM transmission is motivated by the fact that sensing can be performed during the silent periods of the transmitter, thereby avoiding self-interference (SI) cancellation processing of the in-band full duplex operation, which is needed for the cyclic prefix (CP)-OFDM. Additionally, we also show that ZP-OFDM can reject nearby clutter interference. We derive the probability of detection (PD) for the ZP and CP-OFDM systems, allowing useful performance analyses. In particular, we show that the PD expressions lead to an upper bound for the ZP-OFDM transmission, which is useful for selecting the best ZP size for a given system configuration. We also provide an expression that allows range comparison between ZP and CP-OFDM, where we consider a general case of imperfect SI cancellation for the CP-OFDM system. The results show that when the ZP size is 25% of the fast Fourier transform size, the range loss of the ZP system range is only 17% larger than the CP transmission. △ Less

Submitted 31 January, 2024; originally announced February 2024.

RIS-Enabled Integrated Sensing and Communication for 6G Systems

Authors: Dexin Wang, Ahmad Bazzi, Marwa Chafii

Abstract: The following paper proposes a new target localization system design using an architecture based on reconfigurable intelligent surfaces (RISs) and passive radars (PRs) for integrated sensing and communications systems. The preamble of the communication signal is exploited in order to perform target sensing tasks, which involve detection and localization. The RIS in this case can aid the PR in sens… ▽ More The following paper proposes a new target localization system design using an architecture based on reconfigurable intelligent surfaces (RISs) and passive radars (PRs) for integrated sensing and communications systems. The preamble of the communication signal is exploited in order to perform target sensing tasks, which involve detection and localization. The RIS in this case can aid the PR in sensing targets that are otherwise not seen by the PR itself, due to the many obstacles encountered within the propagation channel. Therefore, this work proposes a localization algorithm tailored for the integrated sensing and communications RIS-aided architecture, which is capable of uniquely positioning targets within the scene. The algorithm is capable of detecting the number of targets along with estimating the position of targets via angles and times of arrival. Our simulation results demonstrate the performance of the localization method in terms of different localization and detection metrics and for increasing RIS sizes. △ Less

Submitted 31 December, 2023; originally announced January 2024.

Journal ref: IEEE Wireless Communications and Networking Conference, 2024

Full-Stack End-to-End Sub-THz Simulations at 140 GHz using NYUSIM Channel Model in ns-3

Authors: Hitesh Poddar, Akhileswar Chowdary, Theodore S. Rappaport, Marwa Chafii

Abstract: The next generation of wireless communication is expected to harness the potential of the sub-THz bands to achieve exceptional performance and ubiquitous connectivity. However, network simulators such as ns-3 currently lack support for channel models above 100 GHz. This limits the ability of researchers to study, design, and evaluate systems operating above 100 GHz. Here, we use the drop-based NYU… ▽ More The next generation of wireless communication is expected to harness the potential of the sub-THz bands to achieve exceptional performance and ubiquitous connectivity. However, network simulators such as ns-3 currently lack support for channel models above 100 GHz. This limits the ability of researchers to study, design, and evaluate systems operating above 100 GHz. Here, we use the drop-based NYUSIM channel model to simulate channels above 100 GHz in all 3GPP scenarios including urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF). We evaluate the full stack downlink end-to-end performance (throughput, latency, and packet drop) experienced by a single user equipment (UE) connected to a Next Generation Node B (gNB) operating in the sub-THz bands for three gNB--UE antenna configurations: 8x8--4x4, 16x16--4x4, and 64x64--8x8 by using the NYUSIM channel model at 140 GHz in the ns-3 mmWave module. Our simulations demonstrate that sub-THz bands can enable high-fidelity applications that require data rates exceeding 1 Gbps and latency below 15 milliseconds (ms) using the current mmWave protocol stack, and large antenna arrays. In addition, we show the variation in throughput vs number of realizations and find the optimal number of realizations required to obtain statistically significant results. We strongly encourage researchers worldwide to adopt a similar approach, as it enables the readers to assess the accuracy and reliability of the reported results and enhance the findings' overall interpretability. △ Less

Submitted 11 January, 2024; v1 submitted 26 December, 2023; originally announced December 2023.

Secure Full Duplex Integrated Sensing and Communications

Authors: Ahmad Bazzi, Marwa Chafii

Abstract: The following paper models a secure full duplex (FD) integrated sensing and communication (ISAC) scenario, where malicious eavesdroppers aim at intercepting the downlink (DL) as well as the uplink (UL) information exchanged between the dual functional radar and communication (DFRC) base station (BS) and a set of communication users. The DFRC BS, on the other hand, aims at illuminating radar beams… ▽ More The following paper models a secure full duplex (FD) integrated sensing and communication (ISAC) scenario, where malicious eavesdroppers aim at intercepting the downlink (DL) as well as the uplink (UL) information exchanged between the dual functional radar and communication (DFRC) base station (BS) and a set of communication users. The DFRC BS, on the other hand, aims at illuminating radar beams at the eavesdroppers in order to sense their physical parameters, while maintaining high UL/DL secrecy rates. Based on the proposed model, we formulate a power efficient secure ISAC optimization framework design, which is intended to guarantee both UL and DL secrecy rates requirements, while illuminating radar beams towards eavesdroppers. The framework exploits artificial noise (AN) generation at the DFRC BS, along with UL/DL beamforming design and UL power allocation. We propose a beamforming design solution to the secure ISAC optimization problem. Finally, we corroborate our findings via simulation results and demonstrate the feasibility, as well as the superiority of the proposed algorithm, under different situations. We also reveal insightful trade-offs achieved by our approach. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Meta Distribution of Partial-NOMA

Authors: Konpal Shaukat Ali, Arafat Al-Dweik, Ekram Hossain, Marwa Chafii

Abstract: This work studies the meta distribution (MD) in a two-user partial non-orthogonal multiple access (pNOMA) network. Compared to NOMA where users fully share a resource-element, pNOMA allows sharing only a fraction $α$ of the resource-element. The MD is computed via moment-matching using the first two moments where reduced integral expressions are derived. Accurate approximates are also proposed for… ▽ More This work studies the meta distribution (MD) in a two-user partial non-orthogonal multiple access (pNOMA) network. Compared to NOMA where users fully share a resource-element, pNOMA allows sharing only a fraction $α$ of the resource-element. The MD is computed via moment-matching using the first two moments where reduced integral expressions are derived. Accurate approximates are also proposed for the $b{\rm th}$ moment for mathematical tractability. We show that in terms of percentile-performance of links, pNOMA only outperforms NOMA when $α$ is small. Additionally, pNOMA improves the percentile-performance of the weak-user more than the strong-user highlighting its role in improving fairness. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Emergent Communication in Multi-Agent Reinforcement Learning for Future Wireless Networks

Authors: Marwa Chafii, Salmane Naoumi, Reda Alami, Ebtesam Almazrouei, Mehdi Bennis, Merouane Debbah

Abstract: In different wireless network scenarios, multiple network entities need to cooperate in order to achieve a common task with minimum delay and energy consumption. Future wireless networks mandate exchanging high dimensional data in dynamic and uncertain environments, therefore implementing communication control tasks becomes challenging and highly complex. Multi-agent reinforcement learning with em… ▽ More In different wireless network scenarios, multiple network entities need to cooperate in order to achieve a common task with minimum delay and energy consumption. Future wireless networks mandate exchanging high dimensional data in dynamic and uncertain environments, therefore implementing communication control tasks becomes challenging and highly complex. Multi-agent reinforcement learning with emergent communication (EC-MARL) is a promising solution to address high dimensional continuous control problems with partially observable states in a cooperative fashion where agents build an emergent communication protocol to solve complex tasks. This paper articulates the importance of EC-MARL within the context of future 6G wireless networks, which imbues autonomous decision-making capabilities into network entities to solve complex tasks such as autonomous driving, robot navigation, flying base stations network planning, and smart city applications. An overview of EC-MARL algorithms and their design criteria are provided while presenting use cases and research opportunities on this emerging topic. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Sparse-DFT and WHT Precoding with Iterative Detection for Highly Frequency-Selective Channels

Authors: Roberto Bomfin, Marwa Chafii

Abstract: Various precoders have been recently studied by the wireless community to combat the channel fading effects. Two prominent precoders are implemented with the discrete Fourier transform (DFT) and Walsh-Hadamard transform (WHT). The WHT precoder is implemented with less complexity since it does not need complex multiplications. Also, spreading can be applied sparsely to decrease the transceiver comp… ▽ More Various precoders have been recently studied by the wireless community to combat the channel fading effects. Two prominent precoders are implemented with the discrete Fourier transform (DFT) and Walsh-Hadamard transform (WHT). The WHT precoder is implemented with less complexity since it does not need complex multiplications. Also, spreading can be applied sparsely to decrease the transceiver complexity, leading to sparse DFT (SDFT) and sparse Walsh-Hadamard (SWH). Another relevant topic is the design of iterative receivers that deal with inter-symbol-interference (ISI). In particular, many detectors based on expectation propagation (EP) have been proposed recently for channels with high levels of ISI. An alternative is the maximum a-posterior (MAP) detector, although it leads to unfeasible high complexity in many cases. In this paper, we provide a relatively low-complexity \textcolor{black}{computation} of the MAP detector for the SWH. We also propose two \textcolor{black}{feasible methods} based on the Log-MAP and Max-Log-MAP. Additionally, the DFT, SDFT and SWH precoders are compared using an EP-based receiver with one-tap FD equalization. Lastly, SWH-Max-Log-MAP is compared to the (S)DFT with EP-based receiver in terms of performance and complexity. The results show that the proposed SWH-Max-Log-MAP has a better performance and complexity trade-off for QPSK and 16-QAM under highly selective channels, but has unfeasible complexity for higher QAM orders. △ Less

Submitted 8 September, 2023; originally announced September 2023.

RNN Based Channel Estimation in Doubly Selective Environments

Authors: Abdul Karim Gizzini, Marwa Chafii

Abstract: Doubly-selective channel estimation represents a key element in ensuring communication reliability in wireless systems. Due to the impact of multi-path propagation and Doppler interference in dynamic environments, doubly-selective channel estimation becomes challenging. Conventional symbol-by-symbol (SBS) and frame-by-frame (FBF) channel estimation schemes encounter performance degradation in high… ▽ More Doubly-selective channel estimation represents a key element in ensuring communication reliability in wireless systems. Due to the impact of multi-path propagation and Doppler interference in dynamic environments, doubly-selective channel estimation becomes challenging. Conventional symbol-by-symbol (SBS) and frame-by-frame (FBF) channel estimation schemes encounter performance degradation in high mobility scenarios due to the usage of limited training pilots. Recently, deep learning (DL) has been utilized for doubly-selective channel estimation, where long short-term memory (LSTM) and convolutional neural network (CNN) networks are employed in the SBS and FBF, respectively. However, their usage is not optimal, since LSTM suffers from long-term memory problem, whereas, CNN-based estimators require high complexity. For this purpose, we overcome these issues by proposing an optimized recurrent neural network (RNN)-based channel estimation schemes, where gated recurrent unit (GRU) and Bi-GRU units are used in SBS and FBF channel estimation, respectively. The proposed estimators are based on the average correlation of the channel in different mobility scenarios, where several performance-complexity trade-offs are provided. Moreover, the performance of several RNN networks is analyzed. The performance superiority of the proposed estimators against the recently proposed DL-based SBS and FBF estimators is demonstrated for different scenarios while recording a significant reduction in complexity. △ Less

Submitted 7 July, 2023; originally announced July 2023.

Comments: This paper has been submitted to the IEEE Transactions on Machine Learning in Communications and Networking (TMLCN). arXiv admin note: text overlap with arXiv:2305.00208

Mutual Information Based Pilot Design for ISAC

Authors: Ahmad Bazzi, Marwa Chafii

Abstract: The following paper presents a novel orthogonal pilot design dedicated for dual-functional radar and communication (DFRC) systems performing multi-user communications and target detection. After careful characterization of both sensing and communication metrics based on mutual information (MI), we propose a multi-objective optimization problem (MOOP) tailored for pilot design, dedicated for simult… ▽ More The following paper presents a novel orthogonal pilot design dedicated for dual-functional radar and communication (DFRC) systems performing multi-user communications and target detection. After careful characterization of both sensing and communication metrics based on mutual information (MI), we propose a multi-objective optimization problem (MOOP) tailored for pilot design, dedicated for simultaneously maximizing both sensing and communication MIs. Moreover, the MOOP is further simplified to a single-objective optimization problem, which characterizes trade-offs between sensing and communication performances. Due to the non-convex nature of the optimization problem, we propose to solve it via the projected gradient descent method on the Stiefel manifold. Closed-form gradient expressions are derived, which enable execution of the projected gradient descent algorithm. Furthermore, we prove convergence to a fixed orthogonal pilot matrix. Finally, we demonstrate the capabilities and superiority of the proposed pilot design, and corroborate relevant trade-offs between sensing MI and communication MI. In particular, significant signal-to-noise ratio (SNR) gains for communication are reported, while re-using the same pilots for target detection with significant gains in terms of probability of detection for fixed false-alarm probability. Other interesting findings are reported through simulations, such as an \textit{information overlap} phenomenon, whereby the fruitful ISAC integration can be fully exploited. △ Less

Submitted 22 June, 2023; originally announced June 2023.

A Novel Satellite Selection Algorithm Using LSTM Neural Networks For Single-epoch Localization

Authors: Ibrahim Sbeity, Christophe Villien, Christophe Combettes, Benoît Denis, E Veronica Belmega, Marwa Chafii

Abstract: This work presents a new approach for detection and exclusion (or de-weighting) of pseudo-range measurements from the Global Navigation Satellite System (GNSS) in order to improve the accuracy of single-epoch positioning, which is an essential prerequisite for maintaining good navigation performance in challenging operating contexts (e.g., under Non-Line of Sight and/or multipath propagation). Bey… ▽ More This work presents a new approach for detection and exclusion (or de-weighting) of pseudo-range measurements from the Global Navigation Satellite System (GNSS) in order to improve the accuracy of single-epoch positioning, which is an essential prerequisite for maintaining good navigation performance in challenging operating contexts (e.g., under Non-Line of Sight and/or multipath propagation). Beyond the usual preliminary hard decision stage, which can mainly reject obvious outliers, our approach exploits machine learning to optimize the relative contributions from all available satellites feeding the positioning solver. For this, we construct a customized matrix of pseudorange residuals that is used as an input to the proposed longshort term memory neural network (LSTM NN) architecture. The latter is trained to predict several quality indicators that roughly approximate the standard deviations of pseudo-range errors, which are further integrated in the calculation of weights. Our numerical evaluations on both synthetic and real data show that the proposed solution is able to outperform conventional weighting and signal selection strategies from the state-of-theart, while fairly approaching optimal positioning accuracy. △ Less

Submitted 9 June, 2023; originally announced June 2023.

Comments: arXiv admin note: text overlap with arXiv:2306.05319

Journal ref: IEEE/ION PLANS 2023, Apr 2023, California, United States

Experimental Performance of Blind Position Estimation Using Deep Learning

Authors: Ivo Bizon, Zhongju Li, Ahmad Nimr, Marwa Chafii, Gerhard P. Fettweis

Abstract: Accurate indoor positioning for wireless communication systems represents an important step towards enhanced reliability and security, which are crucial aspects for realizing Industry 4.0. In this context, this paper presents an investigation on the real-world indoor positioning performance that can be obtained using a deep learning (DL)-based technique. For obtaining experimental data, we collect… ▽ More Accurate indoor positioning for wireless communication systems represents an important step towards enhanced reliability and security, which are crucial aspects for realizing Industry 4.0. In this context, this paper presents an investigation on the real-world indoor positioning performance that can be obtained using a deep learning (DL)-based technique. For obtaining experimental data, we collect power measurements associated with reference positions using a wireless sensor network in an indoor scenario. The DL-based positioning scheme is modeled as a supervised learning problem, where the function that describes the relation between measured signal power values and their corresponding transmitter coordinates is approximated. We compare the DL approach to two different schemes with varying degrees of online computational complexity. Namely, maximum likelihood estimation and proximity. Furthermore, we provide a performance comparison of DL positioning trained with data generated exclusively based on a statistical path loss model and tested with experimental data. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: Published in: GLOBECOM 2022 - 2022 IEEE Global Communications Conference

Blind Transmitter Localization Using Deep Learning: A Scalability Study

Authors: Ivo Bizon, Ahmad Nimr, Philipp Schulz, Marwa Chafii, Gerhard P. Fettweis

Abstract: This work presents an investigation on the scalability of a deep leaning (DL)-based blind transmitter positioning system for addressing the multi transmitter localization (MLT) problem. The proposed approach is able to estimate relative coordinates of non-cooperative active transmitters based solely on received signal strength measurements collected by a wireless sensor network. A performance comp… ▽ More This work presents an investigation on the scalability of a deep leaning (DL)-based blind transmitter positioning system for addressing the multi transmitter localization (MLT) problem. The proposed approach is able to estimate relative coordinates of non-cooperative active transmitters based solely on received signal strength measurements collected by a wireless sensor network. A performance comparison with two other solutions of the MLT problem are presented for demonstrating the benefits with respect to scalability of the DL approach. Our investigation aims at highlighting the potential of DL to be a key technique that is able to provide a low complexity, accurate and reliable transmitter positioning service for improving future wireless communications systems. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: Published in: 2023 IEEE Wireless Communications and Networking Conference (WCNC)

Deep Learning-based Estimation for Multitarget Radar Detection

Authors: Mamady Delamou, Ahmad Bazzi, Marwa Chafii, El Mehdi Amhoud

Abstract: Target detection and recognition is a very challenging task in a wireless environment where a multitude of objects are located, whether to effectively determine their positions or to identify them and predict their moves. In this work, we propose a new method based on a convolutional neural network (CNN) to estimate the range and velocity of moving targets directly from the range-Doppler map of th… ▽ More Target detection and recognition is a very challenging task in a wireless environment where a multitude of objects are located, whether to effectively determine their positions or to identify them and predict their moves. In this work, we propose a new method based on a convolutional neural network (CNN) to estimate the range and velocity of moving targets directly from the range-Doppler map of the detected signals. We compare the obtained results to the two dimensional (2D) periodogram, and to the similar state of the art methods, 2DResFreq and VGG-19 network and show that the estimation process performed with our model provides better estimation accuracy of range and velocity index in different signal to noise ratio (SNR) regimes along with a reduced prediction time. Afterwards, we assess the performance of our proposed algorithm using the peak signal to noise ratio (PSNR) which is a relevant metric to analyse the quality of an output image obtained from compression or noise reduction. Compared to the 2D-periodogram, 2DResFreq and VGG-19, we gain 33 dB, 21 dB and 10 dB, respectively, in terms of PSNR when SNR = 30 dB. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Comments: 5 pages , 4 figures

SCA-Based Beamforming Optimization for IRS-Enabled Secure Integrated Sensing and Communication

Authors: Vaibhav Kumar, Marwa Chafii, A. Lee Swindlehurst, Le-Nam Tran, Mark F. Flanagan

Abstract: Integrated sensing and communication (ISAC) is expected to be offered as a fundamental service in the upcoming sixth-generation (6G) communications standard. However, due to the exposure of information-bearing signals to the sensing targets, ISAC poses unique security challenges. In recent years, intelligent reflecting surfaces (IRSs) have emerged as a novel hardware technology capable of enhancin… ▽ More Integrated sensing and communication (ISAC) is expected to be offered as a fundamental service in the upcoming sixth-generation (6G) communications standard. However, due to the exposure of information-bearing signals to the sensing targets, ISAC poses unique security challenges. In recent years, intelligent reflecting surfaces (IRSs) have emerged as a novel hardware technology capable of enhancing the physical layer security of wireless communication systems. Therefore, in this paper, we consider the problem of transmit and reflective beamforming design in a secure IRS-enabled ISAC system to maximize the beampattern gain at the target. The formulated non-convex optimization problem is challenging to solve due to the intricate coupling between the design variables. Moreover, alternating optimization (AO) based methods are inefficient in finding a solution in such scenarios, and convergence to a stationary point is not theoretically guaranteed. Therefore, we propose a novel successive convex approximation (SCA)-based second-order cone programming (SOCP) scheme in which all of the design variables are updated simultaneously in each iteration. The proposed SCA-based method significantly outperforms a penalty-based benchmark scheme previously proposed in this context. Moreover, we also present a detailed complexity analysis of the proposed scheme, and show that despite having slightly higher per-iteration complexity than the benchmark approach the average problem-solving time of the proposed method is notably lower than that of the benchmark scheme. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Comments: 6 pages, 4 figures

Deep Learning Based Channel Estimation in High Mobility Communications Using Bi-RNN Networks

Authors: Abdul Karim Gizzini, Marwa Chafii

Abstract: Doubly-selective channel estimation represents a key element in ensuring communication reliability in wireless systems. Due to the impact of multi-path propagation and Doppler interference in dynamic environments, doubly-selective channel estimation becomes challenging. Conventional channel estimation schemes encounter performance degradation in high mobility scenarios due to the usage of limited… ▽ More Doubly-selective channel estimation represents a key element in ensuring communication reliability in wireless systems. Due to the impact of multi-path propagation and Doppler interference in dynamic environments, doubly-selective channel estimation becomes challenging. Conventional channel estimation schemes encounter performance degradation in high mobility scenarios due to the usage of limited training pilots. Recently, deep learning (DL) has been utilized for doubly-selective channel estimation, where convolutional neural network (CNN) networks are employed in the frame-by-frame (FBF) channel estimation. However, CNN-based estimators require high complexity, making them impractical in real-case scenarios. For this purpose, we overcome this issue by proposing an optimized and robust bi-directional recurrent neural network (Bi-RNN) based channel estimator to accurately estimate the doubly-selective channel, especially in high mobility scenarios. The proposed estimator is based on performing end-to-end interpolation using gated recurrent unit (GRU) unit. Extensive numerical experiments demonstrate that the developed Bi-GRU estimator significantly outperforms the recently proposed CNN-based estimators in different mobility scenarios, while substantially reducing the overall computational complexity. △ Less

Submitted 29 April, 2023; originally announced May 2023.

Comments: Accepted for presentation at IEEE 2023 IEEE International Conference on Communications (ICC), 28 May - 01 June 2023, Rome, Italy

Robust Integrated Sensing and Communication Beamforming for Dual-functional Radar and Communications: Method and Insights

Authors: Ahmad Bazzi, Marwa Chafii

Abstract: This work presents a novel robust beamforming design dedicated for dual-functional radar and communication (DFRC) base stations (BSs) in the context of integrated sensing and communications (ISAC). The architecture is intended for circumstances with imperfect channel state information (CSI). Our suggested approach demonstrates several tradeoffs for joint radar-communication deployment. Due to the… ▽ More This work presents a novel robust beamforming design dedicated for dual-functional radar and communication (DFRC) base stations (BSs) in the context of integrated sensing and communications (ISAC). The architecture is intended for circumstances with imperfect channel state information (CSI). Our suggested approach demonstrates several tradeoffs for joint radar-communication deployment. Due to the DFRC nature of the design, the beamformer can simultaneously point towards an intended target, while optimizing communication quality of service. We unveil several insights regarding closed form expressions, as well as optimality of the proposed beamformer. Lastly, simulation results demonstrate the effectiveness of the proposed ISAC beamformer. △ Less

Submitted 14 March, 2023; originally announced March 2023.

Comments: arXiv admin note: text overlap with arXiv:2207.04921

On Hybrid Radar Fusion for Integrated Sensing and Communication

Authors: Akhileswar Chowdary, Ahmad Bazzi, Marwa Chafii

Abstract: The following paper introduces a novel integrated sensing and communication (ISAC) scenario termed hybrid radar fusion. In this setting, the dual-functional radar and communications (DFRC) base station (BS) acts as a mono-static radar in the downlink (DL), for sensing purposes, while performing its DL communication tasks. Meanwhile, the communication users act as distributed bi-static radar nodes… ▽ More The following paper introduces a novel integrated sensing and communication (ISAC) scenario termed hybrid radar fusion. In this setting, the dual-functional radar and communications (DFRC) base station (BS) acts as a mono-static radar in the downlink (DL), for sensing purposes, while performing its DL communication tasks. Meanwhile, the communication users act as distributed bi-static radar nodes in the uplink (UL) following a frequency-division duplex protocol. The DFRC BS fuses the information available at different DL and UL resource bands to estimate the angles-of-arrival (AoAs) of the multiple targets existing in the scene. In this work, we derive the maximum likelihood (ML) criterion for the hybrid radar fusion problem at hand. Additionally, we design efficient estimators; the first algorithm is based on an alternating optimization approach to solve the ML criterion, while the second one designs an optimization framework that leads to an alternating subspace approach to estimate AoAs for both the target and users. Finally, we demonstrate the superior performance of both algorithms in different scenarios, and the gains offered by these proposed methods through numerical simulations. △ Less

Submitted 18 January, 2024; v1 submitted 10 March, 2023; originally announced March 2023.

Integrated Sensing and Communication for Large Networks using Joint Detection and a Dynamic Transmission Strategy

Authors: Konpal Shaukat Ali, Marwa Chafii

Abstract: A large network employing integrated sensing and communication (ISAC) where a single transmit signal by the base station (BS) serves both the radar and communication modes is studied. We consider bistatic detection at a passive radar and monostatic detection at the transmitting BS. The radar-mode performance is significantly more vulnerable than the communication-mode due to the double path-loss i… ▽ More A large network employing integrated sensing and communication (ISAC) where a single transmit signal by the base station (BS) serves both the radar and communication modes is studied. We consider bistatic detection at a passive radar and monostatic detection at the transmitting BS. The radar-mode performance is significantly more vulnerable than the communication-mode due to the double path-loss in the signal component while interferers have direct links. To combat this, we propose: 1) a novel dynamic transmission strategy (DTS), 2) joint monostatic and bistation detection via cooperation at the BS. We analyze the performance of monostatic, bistatic and joint detection. We show that bistatic detection with dense deployment of low-cost passive radars offers robustness in detection for farther off targets. Significant improvements in radar-performance can be attained with joint detection in certain scenarios, while using one strategy is beneficial in others. Our results highlight that with DTS we are able to significantly improve quality of radar detection at the cost of quantity. Further, DTS causes some performance deterioration to the communication-mode; however, the gains attained for the radar-mode are much higher. We show that joint detection and DTS together can significantly improve radar performance from a traditional radar-network. △ Less

Submitted 23 May, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

RIS-Enabled Passive Radar towards Target Localization

Authors: Ahmad Bazzi, Marwa Chafii

Abstract: In this paper, we study a communication-centric integrated sensing and communication (ISAC) approach, where an access point (AP) communicates with users, while a passive radar (PR) is present in the environment. We investigate the deployment of a reconfigurable intelligent surface (RIS) to enable the PR to localize a target. We derive an optimization problem for updating the phase shifters of the… ▽ More In this paper, we study a communication-centric integrated sensing and communication (ISAC) approach, where an access point (AP) communicates with users, while a passive radar (PR) is present in the environment. We investigate the deployment of a reconfigurable intelligent surface (RIS) to enable the PR to localize a target. We derive an optimization problem for updating the phase shifters of the RIS per epoch. Due to the limited information at the PR, such as unknown payload information and unknown number of targets in the scene, we propose two methods capable of performing joint angle of arrival estimation and detection of the targets. We demonstrate the superior performance of the methods onto the proposed setting through numerical simulations, in comparison to a no-RIS baseline scheme. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Dual-Mode Time Domain Multiplexed Chirp Spread Spectrum

Authors: Ali Waqar Azim, Ahmad Bazzi, Mahrukh Fatima, Raed Shubair, Marwa Chafii

Abstract: We propose a dual-mode (DM) time domain multiplexed (TDM) chirp spread spectrum (CSS) modulation for spectral and energy-efficient low-power wide-area networks (LPWANs). DM-CSS modulation that uses both the even and odd cyclic time shifts has been proposed for LPWANs to achieve noteworthy performance improvement over classical counterparts. However, its spectral efficiency (SE) is half of the in-p… ▽ More We propose a dual-mode (DM) time domain multiplexed (TDM) chirp spread spectrum (CSS) modulation for spectral and energy-efficient low-power wide-area networks (LPWANs). DM-CSS modulation that uses both the even and odd cyclic time shifts has been proposed for LPWANs to achieve noteworthy performance improvement over classical counterparts. However, its spectral efficiency (SE) is half of the in-phase and quadrature (IQ)-TDM-CSS scheme that employs IQ components with both up and down chirps, resulting in a SE that is four times relative to Long Range (LoRa) modulation. Nevertheless, the IQ-TDM-CSS scheme only allows coherent detection. Furthermore, it is also sensitive to carrier frequency and phase offsets, making it less practical for low-cost battery-powered LPWANs for Internet-of-Things (IoT) applications. DM-CSS uses either an up-chirp or a down-chirp. DM-TDM-CSS consists of two chirped symbols that are multiplexed in the time domain. One of these symbols consisting of even and odd frequency shifts (FSs) is chirped using an up-chirp. The second chirped symbol also consists of even and odd FSs, but they are chirped using a down-chirp. It shall be demonstrated that DM-TDM-CSS attains a maximum achievable SE close to IQ-TDM-CSS while also allowing both coherent and non-coherent detection. Additionally, unlike IQ-TDM-CSS, DM-TDM-CSS is robust against carrier frequency and phase offsets. △ Less

Submitted 8 October, 2022; originally announced October 2022.

On Integrated Sensing and Communication Waveforms with Tunable PAPR

Authors: Ahmad Bazzi, Marwa Chafii

Abstract: We present a novel approach to the problem of dual-functional radar and communication (DFRC) waveform design with adjustable peak-to-average power ratio (PAPR), while minimizing the multi-user communication interference and maintaining a similarity constraint towards a radar chirp signal. The approach is applicable to generic radar chirp signals and for different constellation sizes. We formulate… ▽ More We present a novel approach to the problem of dual-functional radar and communication (DFRC) waveform design with adjustable peak-to-average power ratio (PAPR), while minimizing the multi-user communication interference and maintaining a similarity constraint towards a radar chirp signal. The approach is applicable to generic radar chirp signals and for different constellation sizes. We formulate the waveform design problem as a non convex optimization problem. As a solution, we adopt the alternating direction method of multipliers (ADMM), hence iterating towards a stable waveform for both radar and communication purposes. Additionally, we prove convergence of the proposed method and analyze its computational complexity. Moreover, we offer an extended version of the method to cope with imperfect channel state information (CSI). Finally, we demonstrate its superior performance through simulations, in comparison to state-of-the-art radar-communication waveform designs. △ Less

Submitted 25 February, 2023; v1 submitted 6 October, 2022; originally announced October 2022.

Deep Neural Network Augmented Wireless Channel Estimation for Preamble-based OFDM PHY on Zynq System on Chip

Authors: Syed Asrar ul haq, Abdul Karim Gizzini, Shakti Shrey, Sumit J. Darak, Sneh Saurabh, Marwa Chafii

Abstract: Reliable and fast channel estimation is crucial for next-generation wireless networks supporting a wide range of vehicular and low-latency services. Recently, deep learning (DL) based channel estimation has been explored as an efficient alternative to conventional least-square (LS) and linear minimum mean square error (LMMSE) approaches. Most of these DL approaches have not been realized on system… ▽ More Reliable and fast channel estimation is crucial for next-generation wireless networks supporting a wide range of vehicular and low-latency services. Recently, deep learning (DL) based channel estimation has been explored as an efficient alternative to conventional least-square (LS) and linear minimum mean square error (LMMSE) approaches. Most of these DL approaches have not been realized on system-on-chip (SoC), and preliminary study shows that their complexity exceeds the complexity of the entire physical layer (PHY). The high latency of DL is another concern. This paper considers the design and implementation of deep neural network (DNN) augmented LS-based channel estimation (LSDNN) for preamble-based orthogonal frequency-division multiplexing (OFDM) physical layer (PHY) on SoC. We demonstrate the gain in performance compared to the conventional LS and LMMSE approaches. Via software-hardware co-design, word-length optimization, and reconfigurable architectures, we demonstrate the superiority of the LSDNN over the LS and LMMSE for a wide range of signal-to-noise ratio (SNR), number of pilots, preamble types, and wireless channels. Further, we evaluate the performance, power, and area (PPA) of the LS and LSDNN application-specific integrated circuit (ASIC) implementations in 45 nm technology. We demonstrate that word-length optimization can substantially improve PPA for the proposed architecture in ASIC implementations. △ Less

Submitted 29 April, 2023; v1 submitted 6 September, 2022; originally announced September 2022.

Chirp Spread Spectrum-based Waveform Design and Detection Mechanisms for LPWAN-based IoT -- A Survey

Authors: Ali Waqar Azim, Ahmad Bazzi, Raed Shubair, Marwa Chafii

Abstract: LoRa is a widely adopted method of utilizing chirp spread spectrum (CSS) techniques at the physical (PHY) layer to facilitate low-power wide-area network (LPWAN) connectivity. By tailoring the spreading factors, LoRa can achieve a diverse spectral and energy efficiency (EE) levels, making it amenable to a plethora of Internet-of-Things (IoT) applications that rely on LPWANs. However, a primary dra… ▽ More LoRa is a widely adopted method of utilizing chirp spread spectrum (CSS) techniques at the physical (PHY) layer to facilitate low-power wide-area network (LPWAN) connectivity. By tailoring the spreading factors, LoRa can achieve a diverse spectral and energy efficiency (EE) levels, making it amenable to a plethora of Internet-of-Things (IoT) applications that rely on LPWANs. However, a primary drawback of LoRa is its relatively low data data rate. Despite this, there has been a dearth of research dedicated to enhancing the data transfer capabilities of LoRa until recently, when a plethora of CSS-based PHY layer alternatives to LoRa for LPWANs was proposed. This survey, for the first time, presents a comprehensive examination of the waveform design of these CSS-based PHY layer alternatives, proposed between \(2019\) and \(2022\). A total of fifteen alternatives to LoRa are analyzed. This study delves deeply into the waveform design of alternatives to LoRa. The CSS schemes studied in this study are classified into three categories: single chirp, multiple chirps, and multiple chirps with index modulation, based on the number of activated frequency shifts activated for un-chirped symbols. The transceiver architecture of these schemes is thoroughly explicated. Additionally, we propose coherent/non-coherent detection mechanisms for specific schemes that have not been previously documented in the literature. We also provide some key insights and recommendations based on the performance of the schemes. The performance of the schemes is evaluated based on metrics such as EE, spectral efficiency, the bit-error-rate (BER) in additive white Gaussian noise, and BER in the presence of phase and frequency offsets. Finally, we highlight some open research issues and future research directions in this field. △ Less

Submitted 3 April, 2023; v1 submitted 22 August, 2022; originally announced August 2022.

On Outage-based Beamforming Design for Dual-Functional Radar-Communication 6G Systems

Authors: Ahmad Bazzi, Marwa Chafii

Abstract: This article studies and derives beamforming design in a dual-functional radar-communication (DFRC) multiple-input-multiple-output system. We focus on a scenario, where the DFRC base station communicates with downlink communication users, with imperfect channel state information knowledge, and performs target detection, all via the same transmit signal. Through careful relaxation procedures, we ar… ▽ More This article studies and derives beamforming design in a dual-functional radar-communication (DFRC) multiple-input-multiple-output system. We focus on a scenario, where the DFRC base station communicates with downlink communication users, with imperfect channel state information knowledge, and performs target detection, all via the same transmit signal. Through careful relaxation procedures, we arrive at a suitable and novel optimization problem, which maximizes the radar output power in the Bartlett sense, under probabilistic outage signal-to-interference-and-noise ratio constraints. Theoretical analysis proves optimality of the solution given by the relaxed version of the problem, as well as closed-form solutions in certain scenarios. Finally, the achieved performances and trade-offs of the proposed beamforming design are demonstrated through numerical simulations. △ Less

Submitted 5 January, 2023; v1 submitted 11 July, 2022; originally announced July 2022.

Comments: to appear in IEEE Transactions on Wireless Communications, 2023

Twelve Scientific Challenges for 6G: Rethinking the Foundations of Communications Theory

Authors: Marwa Chafii, Lina Bariah, Sami Muhaidat, Merouane Debbah

Abstract: The research in the sixth generation of communication networks needs to tackle new challenges in order to meet the requirements of emerging applications in terms of high data rate, low latency, high reliability, and massive connectivity. To this end, the entire communication chain needs to be optimized, including the channel and the surrounding environment, as it is no longer sufficient to control… ▽ More The research in the sixth generation of communication networks needs to tackle new challenges in order to meet the requirements of emerging applications in terms of high data rate, low latency, high reliability, and massive connectivity. To this end, the entire communication chain needs to be optimized, including the channel and the surrounding environment, as it is no longer sufficient to control the transmitter and/or the receiver only. Investigating large intelligent surfaces, ultra massive multiple-input multiple-output, and smart constructive environments will contribute to this direction. In addition, to allow the exchange of high dimensional sensing data between connected intelligent devices, semantic and goal oriented communications need to be considered for a more efficient and context-aware information encoding. In particular, for multi-agent systems, where agents are collaborating together to achieve a complex task, emergent communications, instead of hard coded communications, can be learned for more efficient task execution and communication resources use. Moreover, new physics phenomenon should be exploited such as the thermodynamics of communication as well as the the interaction between information theory and electromagnetism to better understand the physical limitations of different technologies, e.g, holographic communications. Another new communication paradigm is to consider the end-to-end approach instead of block-by-block optimization, which requires exploiting machine learning theory, non-linear signal processing theory, and non-coherent communications theory. Within this context, we identify twelve scientific challenges for rebuilding the theoretical foundations of communications, and we overview each of the challenges while providing research opportunities and open questions for the research community. △ Less

Submitted 8 February, 2023; v1 submitted 5 July, 2022; originally announced July 2022.

A Survey on Deep Learning based Channel Estimation in Doubly Dispersive Environments

Authors: Abdul Karim Gizzini, Marwa Chafii

Abstract: Wireless communications systems are impacted by multi-path fading and Doppler shift in dynamic environments, where the channel becomes doubly-dispersive and its estimation becomes an arduous task. Only a few pilots are used for channel estimation in conventional approaches to preserve high data rate transmission. Consequently, such estimators experience a significant performance degradation in hig… ▽ More Wireless communications systems are impacted by multi-path fading and Doppler shift in dynamic environments, where the channel becomes doubly-dispersive and its estimation becomes an arduous task. Only a few pilots are used for channel estimation in conventional approaches to preserve high data rate transmission. Consequently, such estimators experience a significant performance degradation in high mobility scenarios. Recently, deep learning has been employed for doubly-dispersive channel estimation due to its low-complexity, robustness, and good generalization ability. Against this backdrop, the current paper presents a comprehensive survey on channel estimation techniques based on deep learning by deeply investigating different methods. The study also provides extensive experimental simulations followed by a computational complexity analysis. After considering different parameters such as modulation order, mobility, frame length, and deep learning architecture, the performance of the studied estimators is evaluated in several mobility scenarios. In addition, the source codes are made available online in order to make the results reproducible. △ Less

Submitted 5 June, 2022; originally announced June 2022.

Comments: Submitted to IEEE Access

Federated Distillation based Indoor Localization for IoT Networks

Authors: Yaya Etiabi, Marwa Chafii, El Mehdi Amhoud

Abstract: Federated distillation (FD) paradigm has been recently proposed as a promising alternative to federated learning (FL) especially in wireless sensor networks with limited communication resources. However, all state-of-the art FD algorithms are designed for only classification tasks and less attention has been given to regression tasks. In this work, we propose an FD framework that properly operates… ▽ More Federated distillation (FD) paradigm has been recently proposed as a promising alternative to federated learning (FL) especially in wireless sensor networks with limited communication resources. However, all state-of-the art FD algorithms are designed for only classification tasks and less attention has been given to regression tasks. In this work, we propose an FD framework that properly operates on regression learning problems. Afterwards, we present a use-case implementation by proposing an indoor localization system that shows a good trade-off communication load vs. accuracy compared to federated learning (FL) based indoor localization. With our proposed framework, we reduce the number of transmitted bits by up to 98%. Moreover, we show that the proposed framework is much more scalable than FL, thus more likely to cope with the expansion of wireless networks. △ Less

Submitted 10 October, 2022; v1 submitted 23 May, 2022; originally announced May 2022.

A Framework for Amalgamating Optical-OFDM and Optical-OFDM with Index Modulation for Optical Wireless Systems

Authors: Ali Waqar Azim, Yannis Le Guennec, Marwa Chafii, Laurent Ros

Abstract: In this communication, we propose a framework for amalgamating optical-orthogonal frequency-division multiplexing (O-OFDM) and O-OFDM with index modulation (O-OFDM-IM) for optical wireless systems. Both schemes individually have some limitations, e.g., O-OFDM does not provide any granularity for spectral efficiency (SE)/energy efficiency (EE) trade-off, and O-OFDM-IM loses EE for higher order modu… ▽ More In this communication, we propose a framework for amalgamating optical-orthogonal frequency-division multiplexing (O-OFDM) and O-OFDM with index modulation (O-OFDM-IM) for optical wireless systems. Both schemes individually have some limitations, e.g., O-OFDM does not provide any granularity for spectral efficiency (SE)/energy efficiency (EE) trade-off, and O-OFDM-IM loses EE for higher order modulation alphabets. By combining O-OFDM and O-OFDM-IM together, the above limitations can be circumvented. Following on from providing the general framework, we use asymmetrically clipped (AC)O-OFDM and ACO-OFDM-IM to demonstrate the validity of the framework. The results presented herein establish that, by consolidating O-OFDM and O-OFDM-IM, in addition to providing SE/EE trade-off, we may realise higher SE and outperform O-OFDM-IM in terms of EE for high SE. △ Less

Submitted 20 May, 2022; originally announced May 2022.

Dual-Mode Chirp Spread Spectrum Modulation

Authors: Ali Waqar Azim, Ahmad Bazzi, Raed Shubair, Marwa Chafii

Abstract: In this letter, we propose dual-mode chirp spread spectrum (DM-CSS) modulation for low-power wide-area networks. DM-CSS is capable of achieving a higher spectral efficiency (SE) relative to its counterparts, such as Long Range (LoRa) modulation. Considering the same symbol period, the SE in DM-CSS are augmented by: (i) simultaneously multiplexing even and odd chirp signals; (ii) using phase shifts… ▽ More In this letter, we propose dual-mode chirp spread spectrum (DM-CSS) modulation for low-power wide-area networks. DM-CSS is capable of achieving a higher spectral efficiency (SE) relative to its counterparts, such as Long Range (LoRa) modulation. Considering the same symbol period, the SE in DM-CSS are augmented by: (i) simultaneously multiplexing even and odd chirp signals; (ii) using phase shifts of \(0\) and \(π\) radians for both even and odd chirp signals; and (iii) using either up-chirp or down-chirp signal. The SE increases by up to \(116.66\%\) for the same bandwidth and spreading factor relative to LoRa. We present a complete transceiver architecture along with non-coherent detection process. Simulation results reveal that DM-CSS is not only more spectral efficient but also more energy efficient than most classical counterparts. It is also demonstrated that DM-CSS is robust to phase and frequency offsets. △ Less

Submitted 11 July, 2022; v1 submitted 19 May, 2022; originally announced May 2022.

Comments: Accept

Journal ref: IEEE Wireless Communications Letters, 2022

A Novel Approach for Cancellation of Non-Aligned Inter Spreading Factor Interference in LoRa Systems

Authors: Qiaohan Zhang, Ivo Bizon, Atul Kumar, Ana Belen Martinez, Marwa Chafii, Gerhard Fettweis

Abstract: Long Range (LoRa) has become a key enabler technology for low power wide area networks. However, due to its ALOHA-based medium access scheme, LoRa has to cope with collisions that limit the capacity and network scalability. Collisions between randomly overlapped signals modulated with different spreading factors (SFs) result in inter-SF interference, which increases the packet loss likelihood when… ▽ More Long Range (LoRa) has become a key enabler technology for low power wide area networks. However, due to its ALOHA-based medium access scheme, LoRa has to cope with collisions that limit the capacity and network scalability. Collisions between randomly overlapped signals modulated with different spreading factors (SFs) result in inter-SF interference, which increases the packet loss likelihood when signal-to-interference ratio (SIR) is low. This issue cannot be resolved by channel coding since the probability of error distance is not concentrated around the adjacent symbol. In this paper, we analytically model this interference, and propose an interference cancellation method based on the idea of segmentation of the received signal. This scheme has three steps. First, the SF of the interference signal is identified, then the equivalent data symbol and complex amplitude of the interference are estimated. Finally, the estimated interference signal is subtracted from the received signal before demodulation. Unlike conventional serial interference cancellation (SIC), this scheme can directly estimate and reconstruct the non-aligned inter-SF interference without synchronization. Simulation results show that the proposed method can significantly reduce the symbol error rate (SER) under low SIR compared with the conventional demodulation. Moreover, it also shows high robustness to fractional sample timing offset (STO) and carrier frequency offset (CFO) of interference. The presented results clearly show the effectiveness of the proposed method in terms of the SER performance. △ Less

Submitted 14 April, 2022; originally announced April 2022.

Comments: Published in: IEEE Open Journal of the Communications Society (Early Access)

Bounds on Power and Common Message Fractions for RSMA with Imperfect SIC

Authors: Garima Chopra, Akhileswar Chowdary, Abhinav Kumar, Marwa Chafii

Abstract: Rate-Splitting multiple access (RSMA) has emerged as a key enabler in improving the performance of the beyond fifth-generation (5G) cellular networks. The existing literature has typically considered the sum rate of the users to evaluate the performance of RSMA. However, it has been shown in the existing works that maximizing the sum rate can result in asymmetric user performance. It significantly… ▽ More Rate-Splitting multiple access (RSMA) has emerged as a key enabler in improving the performance of the beyond fifth-generation (5G) cellular networks. The existing literature has typically considered the sum rate of the users to evaluate the performance of RSMA. However, it has been shown in the existing works that maximizing the sum rate can result in asymmetric user performance. It significantly enhances one user's rate at the cost of the rate of another RSMA user. Further, imperfections can reduce the performance of successive interference cancellation (SIC)-based RSMA. Therefore, in this letter, we consider the imperfection in SIC and derive suitable bounds on fractions of the power allocated for common and private messages and the fraction of common message intended for each user in an RSMA pair such that their individual RSMA rates are greater than their respective orthogonal multiple access (OMA) rates. Through simulations, we validate the derived bounds. We show that they can be used to appropriately select the RSMA parameters resulting in users' RSMA rates being better than their respective OMA rates. △ Less

Submitted 21 December, 2022; v1 submitted 5 March, 2022; originally announced March 2022.

Comments: To be submitted to IEEE Communications Letters

Indoor Localization Under Limited Measurements: A Cross-Environment Joint Semi-Supervised and Transfer Learning Approach

Authors: Mohamed I. AlHajri, Raed M. Shubair, Marwa Chafii

Abstract: The development of highly accurate deep learning methods for indoor localization is often hindered by the unavailability of sufficient data measurements in the desired environment to perform model training. To overcome the challenge of collecting costly measurements, this paper proposes a cross-environment approach that compensates for insufficient labelled measurements via a joint semi-supervised… ▽ More The development of highly accurate deep learning methods for indoor localization is often hindered by the unavailability of sufficient data measurements in the desired environment to perform model training. To overcome the challenge of collecting costly measurements, this paper proposes a cross-environment approach that compensates for insufficient labelled measurements via a joint semi-supervised and transfer learning technique to transfer, in an appropriate manner, the model obtained from a rich-data environment to the desired environment for which data is limited. This is achieved via a sequence of operations that exploit the similarity across environments to enhance unlabelled data model training of the desired environment. Numerical experiments demonstrate that the proposed cross-environment approach outperforms the conventional method, convolutional neural network (CNN), with a significant increase in localization accuracy, up to 43%. Moreover, with only 40% data measurements, the proposed cross-environment approach compensates for data inadequacy and replicates the localization accuracy of the conventional method, CNN, which uses 75% data measurements. △ Less

Submitted 4 August, 2021; originally announced August 2021.

Comments: 5 pages

Temporal Averaging LSTM-based Channel Estimation Scheme for IEEE 802.11p Standard

Authors: Abdul Karim Gizzini, Marwa Chafii, Shahab Ehsanfar, Raed M. Shubair

Abstract: In vehicular communications, reliable channel estimation is critical for the system performance due to the doubly-dispersive nature of vehicular channels. IEEE 802.11p standard allocates insufficient pilots for accurate channel tracking. Consequently, conventional IEEE 802.11p estimators suffer from a considerable performance degradation, especially in high mobility scenarios. Recently, deep learn… ▽ More In vehicular communications, reliable channel estimation is critical for the system performance due to the doubly-dispersive nature of vehicular channels. IEEE 802.11p standard allocates insufficient pilots for accurate channel tracking. Consequently, conventional IEEE 802.11p estimators suffer from a considerable performance degradation, especially in high mobility scenarios. Recently, deep learning (DL) techniques have been employed for IEEE 802.11p channel estimation. Nevertheless, these methods suffer either from performance degradation in very high mobility scenarios or from large computational complexity. In this paper, these limitations are solved using a long short term memory (LSTM)-based estimation. The proposed estimator employs an LSTM unit to estimate the channel, followed by temporal averaging (TA) processing as a noise alleviation technique. Moreover, the noise mitigation ratio is determined analytically, thus validating the TA processing ability in improving the overall performance. Simulation results reveal the performance superiority of the proposed schemes compared to recently proposed DL-based estimators, while recording a significant reduction in the computational complexity. △ Less

Submitted 17 January, 2022; v1 submitted 9 June, 2021; originally announced June 2021.

CNN aided Weighted Interpolation for Channel Estimation in Vehicular Communications

Authors: Abdul Karim Gizzini, Marwa Chafii, Ahmad Nimr, Raed M. Shubair, Gerhard Fettweis

Abstract: IEEE 802.11p standard defines wireless technology protocols that enable vehicular transportation and manage traffic efficiency. A major challenge in the development of this technology is ensuring communication reliability in highly dynamic vehicular environments, where the wireless communication channels are doubly selective, thus making channel estimation and tracking a relevant problem to invest… ▽ More IEEE 802.11p standard defines wireless technology protocols that enable vehicular transportation and manage traffic efficiency. A major challenge in the development of this technology is ensuring communication reliability in highly dynamic vehicular environments, where the wireless communication channels are doubly selective, thus making channel estimation and tracking a relevant problem to investigate. In this paper, a novel deep learning (DL)-based weighted interpolation estimator is proposed to accurately estimate vehicular channels especially in high mobility scenarios. The proposed estimator is based on modifying the pilot allocation of the IEEE 802.11p standard so that more transmission data rates are achieved. Extensive numerical experiments demonstrate that the developed estimator significantly outperforms the recently proposed DL-based frame-by-frame estimators in different vehicular scenarios, while substantially reducing the overall computational complexity. △ Less

Submitted 17 January, 2022; v1 submitted 18 April, 2021; originally announced April 2021.

Comments: 16 pages

Journal ref: IEEE Transactions on Vehicular Technology ( Early Access ) 2021

Channel Estimation for MIMO Space Time Coded OTFS under Doubly Selective Channels

Authors: Roberto Bomfin, Marwa Chafii, Ahmad Nimr, Gerhard Fettweis

Abstract: In this paper, we present a unique word (UW)-based channel estimation approach for multiple-input multiple-output (MIMO) systems under doubly dispersive channels, which is applied to orthogonal time frequency space (OTFS) with space time coding (STC). The OTFS modulation has been recently proposed as a robust technique under time varying channels due to its property of spreading the data symbols o… ▽ More In this paper, we present a unique word (UW)-based channel estimation approach for multiple-input multiple-output (MIMO) systems under doubly dispersive channels, which is applied to orthogonal time frequency space (OTFS) with space time coding (STC). The OTFS modulation has been recently proposed as a robust technique under time varying channels due to its property of spreading the data symbols over time and frequency. Yet another relevant aspect is the employment of multiple antennas at the transmitter and receiver. Therefore, we consider an STC MIMO system with cyclic delay diversity at the transmitter and maximum ratio combining at the receiver, where we develop a UW-based channel estimation scheme for multiple transmit antennas. We show a recently proposed frame optimization scheme for SISO is directly applicable to MIMO. In addition, we evaluate numerically the frame error rate (FER) of OTFS and OFDM with 2x2 and 4x4 MIMO, where the time varying channel is estimated using the UW-based approach. The FER results reveal that OTFS becomes more advantageous than OFDM for MIMO-STC systems with higher order modulation and code rate. △ Less

Submitted 2 April, 2021; originally announced April 2021.

OFDM with Index Modulation in Orbital Angular Momentum Multiplexed Free Space Optical Links

Authors: El-Mehdi Amhoud, Marwa Chafii, Ahmad Nimr, Gerhard Fettweis

Abstract: Communication using orbital angular momentum (OAM) modes has recently received a considerable interest in free space optical (FSO) communications. Propagating OAM modes through free space may be subject to atmospheric turbulence (AT) distortions that cause signal attenuation and crosstalk which degrades the system capacity and increases the error probability. In this paper, we propose to enhance t… ▽ More Communication using orbital angular momentum (OAM) modes has recently received a considerable interest in free space optical (FSO) communications. Propagating OAM modes through free space may be subject to atmospheric turbulence (AT) distortions that cause signal attenuation and crosstalk which degrades the system capacity and increases the error probability. In this paper, we propose to enhance the OAM FSO communications in terms of bit error rate and spectral efficiency, for different levels of AT regimes. The performance gain is achieved by introducing orthogonal frequency division multiplexing (OFDM) with index modulation technique to the OAM FSO system. △ Less

Submitted 5 March, 2021; originally announced March 2021.

Alternative Chirp Spread Spectrum Techniques for LPWANs

Authors: Ivo Bizon Franco de Almeida, Marwa Chafii, Ahmad Nimr, Gerhard Fettweis

Abstract: Chirp spread spectrum (CSS) is the modulation technique currently employed by Long-Range (LoRa), which is one of the most prominent Internet of things wireless communications standards. The LoRa physical layer (PHY) employs CSS on top of a variant of frequency shift keying, and non-coherent detection is employed at the receiver. While it offers a good trade-off among coverage, data rate and device… ▽ More Chirp spread spectrum (CSS) is the modulation technique currently employed by Long-Range (LoRa), which is one of the most prominent Internet of things wireless communications standards. The LoRa physical layer (PHY) employs CSS on top of a variant of frequency shift keying, and non-coherent detection is employed at the receiver. While it offers a good trade-off among coverage, data rate and device simplicity, its maximum achievable data rate is still a limiting factor for some applications. Moreover, the current LoRa standard does not fully exploit the CSS generic case, i.e., when data to be transmitted is encoded in different waveform parameters. Therefore, the goal of this paper is to investigate the performance of CSS while exploring different parameter settings aiming to increase the maximum achievable throughput, and hence increase spectral efficiency. Moreover, coherent and non-coherent reception algorithm design is presented under the framework of maximum likelihood estimation. For the practical receiver design, the formulation of a channel estimation technique is also presented. The performance evaluation of the different variants of CSS is carried out by inspection of the symbol error ratio as a function of the signal-to-noise ratio together with the maximum achievable throughput each scheme can achieve. △ Less

Submitted 10 June, 2021; v1 submitted 18 February, 2021; originally announced February 2021.

Comments: Summited to the IEEE Transactions on Green Communications and Networking. arXiv admin note: text overlap with arXiv:2009.10421

Context-Aware Security for 6G Wireless The Role of Physical Layer Security

Authors: Arsenia Chorti, Andre Noll Barreto, Stefan Kopsell, Marco Zoli, Marwa Chafii, Philippe Sehier, Gerhard Fettweis, H. Vincent Poor

Abstract: Sixth generation systems are expected to face new security challenges, while opening up new frontiers towards context awareness in the wireless edge. The workhorse behind this projected technological leap will be a whole new set of sensing capabilities predicted for 6G devices, in addition to the ability to achieve high precision localization. The combination of these enhanced traits can give rise… ▽ More Sixth generation systems are expected to face new security challenges, while opening up new frontiers towards context awareness in the wireless edge. The workhorse behind this projected technological leap will be a whole new set of sensing capabilities predicted for 6G devices, in addition to the ability to achieve high precision localization. The combination of these enhanced traits can give rise to a new breed of context-aware security protocols, following the quality of security (QoSec) paradigm. In this framework, physical layer security solutions emerge as competitive candidates for low complexity, low-delay and low-footprint, adaptive, flexible and context aware security schemes, leveraging the physical layer of the communications in genuinely cross-layer protocols, for the first time. △ Less

Submitted 18 May, 2022; v1 submitted 5 January, 2021; originally announced January 2021.

Comments: arXiv admin note: text overlap with arXiv:2011.07323

In-phase and Quadrature Chirp Spread Spectrum for IoT Communications

Authors: Ivo Bizon Franco de Almeida, Marwa Chafii, Ahmad Nimr, Gerhard Fettweis

Abstract: This paper describes a coherent chirp spread spectrum (CSS) technique based on the Long-Range (LoRa) physical layer (PHY) framework. LoRa PHY employs CSS on top of a variant of frequency shift keying (FSK), and non-coherent detection is employed at the receiver for obtaining the transmitted data symbols. In this paper, we propose a scheme that encodes information bits on both in-phase and quadratu… ▽ More This paper describes a coherent chirp spread spectrum (CSS) technique based on the Long-Range (LoRa) physical layer (PHY) framework. LoRa PHY employs CSS on top of a variant of frequency shift keying (FSK), and non-coherent detection is employed at the receiver for obtaining the transmitted data symbols. In this paper, we propose a scheme that encodes information bits on both in-phase and quadrature components of the chirp signal, and rather employs a coherent detector at the receiver. Hence, channel equalization is required for compensating the channel induced phase rotation on the transmit signal. Moreover, a simple channel estimation technique exploits the LoRa reference sequences used for synchronization to obtain the complex channel coefficient used in the equalizer. Performance evaluation using numerical simulation shows that the proposed scheme achieves approximately 1 dB gain in terms of energy efficiency, and it doubles the spectral efficiency when compared to the conventional LoRa PHY scheme. This is due to the fact that the coherent receiver is able to exploit the orthogonality between in-phase and quadrature components of the transmit signal. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Comments: 2020 IEEE Global Communications Conference: Selected Areas in Communications: Internet of Things and Smart Connected Communities (Globecom2020 SAC IoTSCC)

Performance Analysis of a 5G Transceiver Implementation for Remote Areas Scenarios

Authors: Wheberth Dias, Danilo Gaspar, Luciano Mendes, Marwa Chafii, Maximilian Matthé, Peter Neuhaus, Gerhard Fettweis

Abstract: The fifth generation of mobile communication networks will support a large set of new services and applications. One important use case is the remote area coverage for broadband Internet access. This use case ha significant social and economic impact, since a considerable percentage of the global population living in low populated area does not have Internet access and the communication infrastruc… ▽ More The fifth generation of mobile communication networks will support a large set of new services and applications. One important use case is the remote area coverage for broadband Internet access. This use case ha significant social and economic impact, since a considerable percentage of the global population living in low populated area does not have Internet access and the communication infrastructure in rural areas can be used to improve agribusiness productivity. The aim of this paper is to analyze the performance of a 5G for Remote Areas transceiver, implemented on field programmable gate array based hardware for real-time processing. This transceiver employs the latest digital communication techniques, such as generalized frequency division multiplexing waveform combined with 2 by 2 multiple-input multiple-output diversity scheme and polar channel coding. The performance of the prototype is evaluated regarding its out-of-band emissions and bit error rate under AWGN channel. △ Less

Submitted 2 May, 2019; originally announced May 2019.

Comments: Presented in 2018 European Conference on Networks and Communications (EuCNC),18-21 June, 2018, Ljubljana, Slovenia

Low-Complexity Iterative Receiver for Orthogonal Chirp Division Multiplexing

Authors: Roberto Bomfin, Marwa Chafii, Gerhard Fettweis

Abstract: This paper proposes a low-complexity iterative receiver for the recently proposed Orthogonal Chirp Division Multiplexing (OCDM) modulation scheme, where we consider a system under frequency-selective channels and constrained to channel state information availability only at the receiver. It has been shown that under these assumptions, OCDM becomes an optimal waveform in terms of performance, i.e.,… ▽ More This paper proposes a low-complexity iterative receiver for the recently proposed Orthogonal Chirp Division Multiplexing (OCDM) modulation scheme, where we consider a system under frequency-selective channels and constrained to channel state information availability only at the receiver. It has been shown that under these assumptions, OCDM becomes an optimal waveform in terms of performance, i.e., frame error rate (FER), when employing a receiver capable of achieving perfect feedback equalizer (PFE) performance. Thus, this work targets proposing such a receiver for OCDM with low-complexity. Our approach is based on the well accepted minimum mean squared error with parallel interference cancellation (MMSE-PIC), where we derive an approximated equalizer whose complexity is reduced to two fast Fourier transforms (FFTs) per iteration. The FER results reveal that i) the proposed low-complexity receiver perform as good as the original MMSE-PIC, ii) OCDM performs very closely to PFE, and iii) OCDM has approximately 2.5 dB improvement over OFDM. △ Less

Submitted 19 March, 2019; originally announced March 2019.

Practical GFDM-based Linear Receivers

Authors: Ahmad Nimr, Marwa Chafii, Gerhard Fettweis

Abstract: The conventional receiver designs of generalized frequency division multiplexing (GFDM) consider a large scale multiple-input multiple-output (MIMO) system with a block circular matrix of combined channel and modulation. Exploiting this structure, several approaches have been proposed for low complexity joint linear minimum mean squared error (LMMSE) receiver. However, the joint design is complica… ▽ More The conventional receiver designs of generalized frequency division multiplexing (GFDM) consider a large scale multiple-input multiple-output (MIMO) system with a block circular matrix of combined channel and modulation. Exploiting this structure, several approaches have been proposed for low complexity joint linear minimum mean squared error (LMMSE) receiver. However, the joint design is complicated and inappropriate for hardware implementation. In this paper, we define the concept of GFDM-based linear receivers, which first performs channel equalization (CEq) and afterwards the equalized signal is processed with GFDM demodulator. We show that the optimal joint LMMSE receiver is equivalent to a GFDM-based one, that applies LMMSE-CEq and zero-forcing demodulation. For orthogonal modulation, the optimal LMMSE receiver has an implementation-friendly structure. For the non-orthogonal case, we propose two practical designs that approach the performance of the joint LMMSE. Finally, we analytically prove that GFDM-based receivers achieve equal signal-to-interference-plus-noise ratio per subsymbols within the same subcarrier. △ Less

Submitted 14 December, 2018; originally announced December 2018.

Comments: Accepted in the 12th International ITG Conference on Systems, Communications and Coding 2019, Rostock, Germany

Unified Low Complexity Radix-2 Architectures for Time and Frequency-domain GFDM Modem

Authors: Ahmad Nimr, Marwa Chafii, Gerhard Fettweis

Abstract: Most of the conventional multicarrier waveforms explicitly or implicitly involve a generalized frequency division multiplexing (GFDM)-based modem as a core part of the baseband processing. Some are based on GFDM with a single prototype filter, e.g. orthogonal frequency division multiplexing (OFDM) and others employ multiple filters such as filter bank multicarrier (FBMC). Moreover, the GFDM degree… ▽ More Most of the conventional multicarrier waveforms explicitly or implicitly involve a generalized frequency division multiplexing (GFDM)-based modem as a core part of the baseband processing. Some are based on GFDM with a single prototype filter, e.g. orthogonal frequency division multiplexing (OFDM) and others employ multiple filters such as filter bank multicarrier (FBMC). Moreover, the GFDM degrees of freedom combined with multiple prototype filters design allow the development and optimization of new waveforms. Nevertheless, GFDM has been widely considered as a complex modulation because of the requirements of odd number of subcarriers or subsymbols. Accordingly, the current state of the art implementations consume high resources. One solution to reduce the complexity is utilizing radix-2 parameters. Due to the advancement in GFDM filter design, the constraint of using odd parameters has been overcome and radix-2 realization is now possible. In this paper, we propose a unified low complexity architecture that can be reconfigured to provide both time-domain and frequency-domain modulation/demodulation. The design consists of several radix-2 fast Fourier transform (FFT) and memory blocks, in addition to one complex multiplier. Moreover, we provide a unified architecture for the state of the art implementations, which is designed based on direct computation of circular convolution using parallel multiplier chains. As we demonstrate in this work, the FFTbased architecture is computationally more efficient, provides more flexibility, significantly reduces the resource consumption, and achieves similar latency for larger block size. △ Less

Submitted 9 November, 2018; v1 submitted 6 November, 2018; originally announced November 2018.

Comments: Accepted in IEEE CASM 2018/Q4 special issue

Extended GFDM Framework: OTFS and GFDM Comparison

Authors: Ahmad Nimr, Marwa Chafii, Maximilian Matthe, Gerhard Fettweis

Abstract: Orthogonal time frequency space modulation (OTFS) has been recently proposed to achieve time and frequency diversity, especially in linear time-variant (LTV) channels with large Doppler frequencies. The idea is based on the precoding of the data symbols using symplectic finite Fourier transform (SFFT) then transmitting them by mean of orthogonal frequency division multiplexing (OFDM) waveform. Con… ▽ More Orthogonal time frequency space modulation (OTFS) has been recently proposed to achieve time and frequency diversity, especially in linear time-variant (LTV) channels with large Doppler frequencies. The idea is based on the precoding of the data symbols using symplectic finite Fourier transform (SFFT) then transmitting them by mean of orthogonal frequency division multiplexing (OFDM) waveform. Consequently, the demodulator and channel equalization can be coupled in one processing step. As a distinguished feature, the demodulated data symbols have roughly equal gain independent of the channel selectivity. On the other hand, generalized frequency division multiplexing (GFDM) modulation also employs the spreading over the time and frequency domains using circular filtering. Accordingly, the data symbols are implicitly precoded in a similar way as applying SFFT in OTFS. In this paper, we present an extended representation of GFDM which shows that OTFS can be processed as a GFDM signal with simple permutation. Nevertheless, this permutation is the key factor behind the outstanding performance of OTFS in LTV channels, as demonstrated in this work. Furthermore, the representation of OTFS in the GFDM framework provides an efficient implementation, that has been intensively investigated for GFDM, and facilitates the understanding of the OTFS distinct features. △ Less

Submitted 3 August, 2018; originally announced August 2018.

Comments: Accepted in IEEE Global Communications Conference 9-13 December 2018 Abu Dhabi, UAE

Journal ref: 2018 IEEE Global Communications Conference (GLOBECOM)