-
Extracting work from coherence in a two-mode Bose-Einstein condensate
Authors:
L. A. Williamson,
F. Cerisola,
J. Anders,
Matthew J. Davis
Abstract:
We show how work can be extracted from number-state coherence in a two-mode Bose-Einstein condensate. With careful tuning of parameters, a sequence of thermodynamically reversible steps transforms a Glauber coherent state into a thermal state with the same energy probability distribution. The work extracted during this process arises entirely from the removal of quantum coherence. More generally,…
▽ More
We show how work can be extracted from number-state coherence in a two-mode Bose-Einstein condensate. With careful tuning of parameters, a sequence of thermodynamically reversible steps transforms a Glauber coherent state into a thermal state with the same energy probability distribution. The work extracted during this process arises entirely from the removal of quantum coherence. More generally, we characterise quantum (from coherence) and classical (remaining) contributions to work output, and find that in this system the quantum contribution can be dominant over a broad range of parameters. The proportion of quantum work output can be further enhanced by squeezing the initial coherent state. Due to the many-body nature of the system, the work from coherence can equivalently be understood as work from entanglement.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Stochastic simulation of dissipative quantum oscillators
Authors:
Charlie R. Hogg,
Jonas Glatthard,
Federico Cerisola,
Janet Anders
Abstract:
Generic open quantum systems are notoriously difficult to simulate unless one looks at specific regimes. In contrast, classical dissipative systems can often be effectively described by stochastic processes, which are generally less computationally expensive. Here, we use the paradigmatic case of a dissipative quantum oscillator to give a pedagogic introduction into the modelling of open quantum s…
▽ More
Generic open quantum systems are notoriously difficult to simulate unless one looks at specific regimes. In contrast, classical dissipative systems can often be effectively described by stochastic processes, which are generally less computationally expensive. Here, we use the paradigmatic case of a dissipative quantum oscillator to give a pedagogic introduction into the modelling of open quantum systems using quasiclassical methods, i.e. classical stochastic methods that use a 'quantum' noise spectrum to capture the influence of the environment on the system. Such quasiclassical methods have the potential to offer insights into the impact of the quantum nature of the environment on the dynamics of the system of interest whilst still being computationally tractable.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Coupling a single spin to high-frequency motion
Authors:
Federico Fedele,
Federico Cerisola,
Lea Bresque,
Florian Vigneau,
Juliette Monsel,
Jorge Tabanera,
Kushagra Aggarwal,
Jonathan Dexter,
Sofia Sevitz,
Joe Dunlop,
Alexia Auffèves,
Juan Parrondo,
András Pályi,
Janet Anders,
Natalia Ares
Abstract:
Coupling a single spin to high-frequency mechanical motion is a fundamental bottleneck of applications such as quantum sensing, intermediate and long-distance spin-spin coupling, and classical and quantum information processing. Previous experiments have only shown single spin coupling to low-frequency mechanical resonators, such as diamond cantilevers. High-frequency mechanical resonators, having…
▽ More
Coupling a single spin to high-frequency mechanical motion is a fundamental bottleneck of applications such as quantum sensing, intermediate and long-distance spin-spin coupling, and classical and quantum information processing. Previous experiments have only shown single spin coupling to low-frequency mechanical resonators, such as diamond cantilevers. High-frequency mechanical resonators, having the ability to access the quantum regime, open a range of possibilities when coupled to single spins, including readout and storage of quantum states. Here we report the first experimental demonstration of spin-mechanical coupling to a high-frequency resonator. We achieve this all-electrically on a fully suspended carbon nanotube device. A new mechanism gives rise to this coupling, which stems from spin-orbit coupling, and it is not mediated by strain. We observe both resonant and off-resonant coupling as a shift and broadening of the electric dipole spin resonance (EDSR), respectively. We develop a complete theoretical model taking into account the tensor form of the coupling and non-linearity in the motion. Our results propel spin-mechanical platforms to an uncharted regime. The interaction we reveal provides the full toolbox for promising applications ranging from the demonstration of macroscopic superpositions, to the operation of fully quantum engines, to quantum simulators.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
SpiDy.jl: open-source Julia package for the study of non-Markovian stochastic dynamics
Authors:
Stefano Scali,
Simon Horsley,
Janet Anders,
Federico Cerisola
Abstract:
SpiDy.jl solves the non-Markovian stochastic dynamics of interacting classical spin vectors and harmonic oscillator networks in contact with a dissipative environment. The methods implemented allow the user to include arbitrary memory effects and colored quantum noise spectra. In this way, SpiDy.jl provides key tools for the simulation of classical and quantum open systems including non-Markovian…
▽ More
SpiDy.jl solves the non-Markovian stochastic dynamics of interacting classical spin vectors and harmonic oscillator networks in contact with a dissipative environment. The methods implemented allow the user to include arbitrary memory effects and colored quantum noise spectra. In this way, SpiDy.jl provides key tools for the simulation of classical and quantum open systems including non-Markovian effects and arbitrarily strong coupling to the environment. Among the wide range of applications, some examples range from atomistic spin dynamics to ultrafast magnetism and the study of anisotropic materials. We provide the user with Julia notebooks to guide them through the various mathematical methods and help them quickly set up complex simulations.
△ Less
Submitted 30 May, 2024; v1 submitted 4 October, 2023;
originally announced October 2023.
-
Enhanced entanglement in multi-bath spin-boson models
Authors:
Charlie R. Hogg,
Federico Cerisola,
James D. Cresser,
Simon A. R. Horsley,
Janet Anders
Abstract:
The spin-boson model usually considers a spin coupled to a single bosonic bath. However, some physical situations require coupling of the spin to multiple environments. For example, spins interacting with phonons in three-dimensional magnetic materials. Here, we consider a spin coupled isotropically to three independent baths. We show that coupling to multiple baths can significantly increase enta…
▽ More
The spin-boson model usually considers a spin coupled to a single bosonic bath. However, some physical situations require coupling of the spin to multiple environments. For example, spins interacting with phonons in three-dimensional magnetic materials. Here, we consider a spin coupled isotropically to three independent baths. We show that coupling to multiple baths can significantly increase entanglement between the spin and its environment at zero temperature. The effect of this is to reduce the spin's expectation values in the mean force equilibrium state. In contrast, the classical three-bath spin equilibrium state turns out to be entirely independent of the environmental coupling. These results reveal purely quantum effects that can arise from multi-bath couplings, with potential applications in a wide range of settings, such as magnetic materials.
△ Less
Submitted 20 May, 2024; v1 submitted 19 June, 2023;
originally announced June 2023.
-
Thermodynamically Optimal Protocols for Dual-Purpose Qubit Operations
Authors:
Joe Dunlop,
Federico Cerisola,
Jorge Tabanera-Bravo,
Janet Anders
Abstract:
Information processing, quantum or classical, relies on channels transforming multiple input states to different corresponding outputs. Previous research has established bounds on the thermodynamic resources required for such operations, but no protocols have been specified for their optimal implementation. For the insightful case of qubits, we here develop explicit protocols to transform two stat…
▽ More
Information processing, quantum or classical, relies on channels transforming multiple input states to different corresponding outputs. Previous research has established bounds on the thermodynamic resources required for such operations, but no protocols have been specified for their optimal implementation. For the insightful case of qubits, we here develop explicit protocols to transform two states in an energetically optimal manner. We first prove conditions on the feasibility of carrying out such transformations at all, and then quantify the achievable work extraction. Our results uncover a fundamental incompatibility between the thermodynamic ideal of slow, quasistatic processes and the information-theoretic requirement to preserve distinguishablity between different possible output states.
△ Less
Submitted 21 May, 2024; v1 submitted 15 June, 2023;
originally announced June 2023.
-
Accounting for Quantum Effects in Atomistic Spin Dynamics
Authors:
Marco Berritta,
Stefano Scali,
Federico Cerisola,
Janet Anders
Abstract:
Atomistic spin dynamics (ASD) is a standard tool to model the magnetization dynamics of a variety of materials. The fundamental dynamical model underlying ASD is entirely classical. In this paper, we present two approaches to effectively incorporate quantum effects into ASD simulations, thus enhancing their low temperature predictions. The first allows to simulate the magnetic behavior of a quantu…
▽ More
Atomistic spin dynamics (ASD) is a standard tool to model the magnetization dynamics of a variety of materials. The fundamental dynamical model underlying ASD is entirely classical. In this paper, we present two approaches to effectively incorporate quantum effects into ASD simulations, thus enhancing their low temperature predictions. The first allows to simulate the magnetic behavior of a quantum spin system by solving the equations of motion of a classical spin system at an effective temperature relative to the critical temperature. This effective temperature is determined a priori from the microscopic properties of the system. The second approach is based on a \semi model where classical spins interact with an environment with a quantum-like power spectrum. The parameters that characterize this model can be calculated ab initio or extracted from experiments. This semi-classical model quantitatively reproduces the absolute temperature behavior of a magnetic system, thus accounting for the quantum mechanical aspects of its dynamics, even at low temperature. The methods presented here can be readily implemented in current ASD simulations with no additional complexity cost.
△ Less
Submitted 4 May, 2024; v1 submitted 26 May, 2023;
originally announced May 2023.
-
A Wigner quasiprobability distribution of work
Authors:
Federico Cerisola,
Franco Mayo,
Augusto J. Roncaglia
Abstract:
In this article we introduce a quasiprobability distribution of work that is based on the Wigner function. This construction rests on the idea that the work done on an isolated system can be coherently measured by coupling the system to a quantum measurement apparatus. In this way, a quasiprobability distribution of work can be defined in terms of the Wigner function of the apparatus. This quasidi…
▽ More
In this article we introduce a quasiprobability distribution of work that is based on the Wigner function. This construction rests on the idea that the work done on an isolated system can be coherently measured by coupling the system to a quantum measurement apparatus. In this way, a quasiprobability distribution of work can be defined in terms of the Wigner function of the apparatus. This quasidistribution contains the information of the work statistics and also holds a clear operational definition. Moreover, it is shown that the presence of quantum coherence in the energy eigenbasis is related with the appearance of characteristics related to non-classicality in the Wigner function such as negativity and interference fringes. On the other hand, from this quasiprobability distribution it is straightforward to obtain the standard two-point measurement probability distribution of work and also the difference in average energy for initial states with coherences.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Stability of long-sustained oscillations induced by electron tunneling
Authors:
Jorge Tabanera-Bravo,
Florian Vigneau,
Juliette Monsel,
Kushagra Aggarwal,
Léa Bresque,
Federico Fedele,
Federico Cerisola,
G. A. D. Briggs,
Janet Anders,
Alexia Aufèves,
Juan M. R. Parrondo,
Natalia Ares
Abstract:
Self-oscillations are the result of an efficient mechanism generating periodic motion from a constant power source. In quantum devices, these oscillations may arise due to the interaction between single electron dynamics and mechanical motion. We show that, due to the complexity of this mechanism, these self-oscillations may irrupt, vanish, or exhibit a bistable behaviour causing hysteresis cycles…
▽ More
Self-oscillations are the result of an efficient mechanism generating periodic motion from a constant power source. In quantum devices, these oscillations may arise due to the interaction between single electron dynamics and mechanical motion. We show that, due to the complexity of this mechanism, these self-oscillations may irrupt, vanish, or exhibit a bistable behaviour causing hysteresis cycles. We observe these hysteresis cycles and characterize the stability of different regimes in both single and double quantum dot configurations. In particular cases, we find these oscillations stable for over 20 seconds, many orders of magnitude above electronic and mechanical characteristic timescales, revealing the robustness of the mechanism at play.
△ Less
Submitted 26 March, 2024; v1 submitted 8 November, 2022;
originally announced November 2022.
-
Quantum-classical correspondence in spin-boson equilibrium states at arbitrary coupling
Authors:
Federico Cerisola,
Marco Berritta,
Stefano Scali,
Simon A. R. Horsley,
James D. Cresser,
Janet Anders
Abstract:
The equilibrium properties of nanoscale systems can deviate significantly from standard thermodynamics due to their coupling to an environment. For the generalised $θ$-angled spin-boson model, we first derive a compact and general form of the classical equilibrium state including environmental corrections to all orders. Secondly, for the quantum spin-boson model we prove, by carefully taking a lar…
▽ More
The equilibrium properties of nanoscale systems can deviate significantly from standard thermodynamics due to their coupling to an environment. For the generalised $θ$-angled spin-boson model, we first derive a compact and general form of the classical equilibrium state including environmental corrections to all orders. Secondly, for the quantum spin-boson model we prove, by carefully taking a large spin limit, that Bohr's quantum-classical correspondence persists at all coupling strengths. This correspondence gives insight into the conditions for a coupled quantum spin to be well-approximated by a coupled classical spin-vector. Thirdly, we demonstrate that previously identified environment-induced 'coherences' in the equilibrium state of weakly coupled quantum spins, do not disappear in the classical case. Finally, we provide the first classification of the coupling parameter regimes for the spin-boson model, from weak to ultrastrong, both for the quantum case and the classical setting. Our results shed light on the interplay of quantum and mean force corrections in equilibrium states of the spin-boson model, and will help draw the quantum to classical boundary in a range of fields, such as magnetism and exciton dynamics.
△ Less
Submitted 13 December, 2022; v1 submitted 22 April, 2022;
originally announced April 2022.
-
Thermodynamics and optimal protocols of multidimensional quadratic Brownian systems
Authors:
Paolo Abiuso,
Viktor Holubec,
Janet Anders,
Zhuolin Ye,
Federico Cerisola,
Martí Perarnau-Llobet
Abstract:
We characterize finite-time thermodynamic processes of multidimensional quadratic overdamped systems. Analytic expressions are provided for heat, work, and dissipation for any evolution of the system covariance matrix. The Bures-Wasserstein metric between covariance matrices naturally emerges as the local quantifier of dissipation. General principles of how to apply these geometric tools to identi…
▽ More
We characterize finite-time thermodynamic processes of multidimensional quadratic overdamped systems. Analytic expressions are provided for heat, work, and dissipation for any evolution of the system covariance matrix. The Bures-Wasserstein metric between covariance matrices naturally emerges as the local quantifier of dissipation. General principles of how to apply these geometric tools to identify optimal protocols are discussed. Focusing on the relevant slow-driving limit, we show how these results can be used to analyze cases in which the experimental control over the system is partial.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Optimal finite-time heat engines under constrained control
Authors:
Zhuolin Ye,
Federico Cerisola,
Paolo Abiuso,
Janet Anders,
Martí Perarnau-Llobet,
Viktor Holubec
Abstract:
We optimize finite-time stochastic heat engines with a periodically scaled Hamiltonian under experimentally motivated constraints on the bath temperature $T$ and the scaling parameter $λ$. We present a general geometric proof that maximum-efficiency protocols for $T$ and $λ$ are piecewise constant, alternating between the maximum and minimum allowed values. When $λ$ is restricted to a small range…
▽ More
We optimize finite-time stochastic heat engines with a periodically scaled Hamiltonian under experimentally motivated constraints on the bath temperature $T$ and the scaling parameter $λ$. We present a general geometric proof that maximum-efficiency protocols for $T$ and $λ$ are piecewise constant, alternating between the maximum and minimum allowed values. When $λ$ is restricted to a small range and the system is close to equilibrium at the ends of the isotherms, a similar argument shows that this protocol also maximizes output power. These results are valid for arbitrary dynamics. We illustrate them for an overdamped Brownian heat engine, which can experimentally be realized using optical tweezers with stiffness $λ$.
△ Less
Submitted 18 July, 2022; v1 submitted 25 February, 2022;
originally announced February 2022.
-
Heat engines with single-shot deterministic work extraction
Authors:
Federico Cerisola,
Facundo Sapienza,
Augusto Roncaglia
Abstract:
We introduce heat engines working in the nano-regime that allow to extract a finite amount of deterministic work. We show that the efficiency of these cycles is strictly smaller than Carnot's, and we associate this difference with a fundamental irreversibility that is present in single-shot transformations. When fluctuations in the extracted work are allowed there is a trade-off between their size…
▽ More
We introduce heat engines working in the nano-regime that allow to extract a finite amount of deterministic work. We show that the efficiency of these cycles is strictly smaller than Carnot's, and we associate this difference with a fundamental irreversibility that is present in single-shot transformations. When fluctuations in the extracted work are allowed there is a trade-off between their size and the efficiency. As the size of fluctuations increases so does the efficiency, and optimal efficiency is recovered for unbounded fluctuations, while certain amount of deterministic work is drawn from the cycle. Finally, we show that if the working medium is composed by many particles, by creating an amount of correlations between the subsystems that scales logarithmically with their number, Carnot's efficiency can also be approached in the asymptotic limit along with deterministic work extraction.
△ Less
Submitted 7 August, 2020;
originally announced August 2020.
-
Correlations as a resource in quantum thermodynamics
Authors:
Facundo Sapienza,
Federico Cerisola,
Augusto J. Roncaglia
Abstract:
The presence of correlations in physical systems can be a valuable resource for many quantum information tasks. They are also relevant in thermodynamic transformations, and their creation is usually associated to some energetic cost. In this work, we study the role of correlations in the thermodynamic process of state formation in the single-shot regime, and find that correlations can also be view…
▽ More
The presence of correlations in physical systems can be a valuable resource for many quantum information tasks. They are also relevant in thermodynamic transformations, and their creation is usually associated to some energetic cost. In this work, we study the role of correlations in the thermodynamic process of state formation in the single-shot regime, and find that correlations can also be viewed as a resource. First, we show that the energetic cost of creating multiple copies of a given state can be reduced by allowing correlations in the final state. We obtain the minimum cost for every finite number of subsystems, and then we show that this feature is not restricted to the case of copies. More generally, we demonstrate that in the asymptotic limit, by allowing a logarithmic amount of correlations, we can recover standard results where the free energy quantifies this minimum cost.
△ Less
Submitted 22 June, 2019; v1 submitted 2 October, 2018;
originally announced October 2018.
-
Ancilla-assisted measurement of quantum work
Authors:
Gabriele De Chiara,
Paolo Solinas,
Federico Cerisola,
Augusto J. Roncaglia
Abstract:
We review the use of an external auxiliary detector for measuring the full distribution of the work performed on or extracted from a quantum system during a unitary thermodynamic process. We first illustrate two paradigmatic schemes that allow one to measure the work distribution: a Ramsey technique to measure the characteristic function and a positive operator valued measure (POVM) scheme to dire…
▽ More
We review the use of an external auxiliary detector for measuring the full distribution of the work performed on or extracted from a quantum system during a unitary thermodynamic process. We first illustrate two paradigmatic schemes that allow one to measure the work distribution: a Ramsey technique to measure the characteristic function and a positive operator valued measure (POVM) scheme to directly measure the work probability distribution. Then, we show that these two ideas can be understood in a unified framework for assessing work fluctuations through a generic quantum detector and describe two protocols that are able to yield complementary information. This allows us also to highlight how quantum work is affected by the presence of coherences in the system's initial state. Finally, we describe physical implementations and experimental realisations of the first two schemes.
△ Less
Submitted 31 August, 2018; v1 submitted 15 May, 2018;
originally announced May 2018.
-
Using a quantum work meter to test non-equilibrium fluctuation theorems
Authors:
Federico Cerisola,
Yair Margalit,
Shimon Machluf,
Augusto J. Roncaglia,
Juan Pablo Paz,
Ron Folman
Abstract:
Non-equilibrium quantum thermodynamics is essential to describe new devices that operate far from the regime where the usual thermodynamical laws are obeyed. When quantum fluctuations dominate, defining and measuring work and heat, two central concepts in classical thermodynamics, is non-trivial. For driven, but otherwise isolated, quantum systems, work is a random variable associated with the cha…
▽ More
Non-equilibrium quantum thermodynamics is essential to describe new devices that operate far from the regime where the usual thermodynamical laws are obeyed. When quantum fluctuations dominate, defining and measuring work and heat, two central concepts in classical thermodynamics, is non-trivial. For driven, but otherwise isolated, quantum systems, work is a random variable associated with the change in the internal energy, as the first law of thermodynamics indicates. In this paper we present the design and the experimental implementation of a quantum work meter (QWM) operating on an ensemble of cold atoms. Our QWM not only directly measures work but also directly samples its probability distribution. As the work probability distribution plays a central role in the fluctuation theorems of non-equilibrium quantum thermodynamics, the QWM is an ideal tool to test their validity. In particular, we use it to verify the Jarzynski identity.
△ Less
Submitted 27 November, 2017; v1 submitted 23 June, 2017;
originally announced June 2017.
-
Work measurement as a generalized quantum measurement
Authors:
Augusto J. Roncaglia,
Federico Cerisola,
Juan Pablo Paz
Abstract:
We present a new method to measure the work $w$ performed on a driven quantum system and to sample its probability distribution $P(w)$. The method is based on a simple fact that remained unnoticed until now: Work on a quantum system can be measured by performing a generalized quantum measurement at a single time. Such measurement, which technically speaking is denoted as a POVM (positive operator…
▽ More
We present a new method to measure the work $w$ performed on a driven quantum system and to sample its probability distribution $P(w)$. The method is based on a simple fact that remained unnoticed until now: Work on a quantum system can be measured by performing a generalized quantum measurement at a single time. Such measurement, which technically speaking is denoted as a POVM (positive operator valued measure) reduces to an ordinary projective measurement on an enlarged system. This observation not only demystifies work measurement but also suggests a new quantum algorithm to efficiently sample the distribution $P(w)$. This can be used, in combination with fluctuation theorems, to estimate free energies of quantum states on a quantum computer.
△ Less
Submitted 18 December, 2014; v1 submitted 12 September, 2014;
originally announced September 2014.