-
Lessons learned after three years of SPIDER operation and the first MITICA integrated tests
Authors:
D. Marcuzzi,
V. Toigo,
M. Boldrin,
G. Chitarin,
S. Dal Bello,
L. Grando,
A. Luchetta,
R. Pasqualotto,
M. Pavei,
G. Serianni,
L. Zanotto,
R. Agnello,
P. Agostinetti,
M. Agostini,
D. Aprile,
M. Barbisan,
M. Battistella,
G. Berton,
M. Bigi,
M. Brombin,
V. Candela,
V. Candeloro,
A. Canton,
R. Casagrande,
C. Cavallini
, et al. (117 additional authors not shown)
Abstract:
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedi…
▽ More
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedicated to develo** and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign. Parallelly, developments on MITICA, the full-scale prototype of the ITER NBI featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of in-vessel components, while power supplies and auxiliary plants are already under final testing and commissioning. Integration, commissioning and tests of the 1MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. The integrated test to confirm 1MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, solutions for the repair and the improvement of the system were developed. Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Numerical and experimental investigations of a microwave interferometer for the negative ion source SPIDER
Authors:
R. Agnello,
R. Cavazzana,
I. Furno,
R. Jacquier,
R. Pasqualotto,
E. Sartori,
G. Serianni
Abstract:
The electron density close to the extraction grids and the co-extracted electrons represent a crucial issue when operating negative ion sources for fusion reactors. An excessive electron density in the plasma expansion region can indeed inhibit the negative ion production and introduce potentially harmful electrons in the accelerator. Among the set of plasma and beam diagnostics proposed for SPIDE…
▽ More
The electron density close to the extraction grids and the co-extracted electrons represent a crucial issue when operating negative ion sources for fusion reactors. An excessive electron density in the plasma expansion region can indeed inhibit the negative ion production and introduce potentially harmful electrons in the accelerator. Among the set of plasma and beam diagnostics proposed for SPIDER upgrade, a heterodyne microwave (mw) interferometer at 100 GHz is being explored as a possibility to measure electron density in the plasma extraction region. The major issue in applying this technique in SPIDER is the poor accessibility of the probing microwave beam through the source metal walls and the long distance of 4 m at which mw modules should be located outside the vacuum vessel. Numerical investigations in a full-scale geometry showed that the power transmitted through the plasma source apertures was sufficient for the microwave module sensitivity. An experimental proof-of-principle of the setup was then performed. The microwave system was tested on an experimental full-scale test-bench mimicking SPIDER viewports accessibility constraints, including the presence of a SPIDER-like plasma. The outcome of first tests revealed that, despite the geometrical constraints, in certain conditions, the electron density measurements are possible. The main issue arises from decoupling the one-pass signal from spurious multipaths generated by mw beam reflections, requiring signal cross correlation analysis. These preliminary tests demonstrate that despite the 4 m distance between the mw modules and the presence of metal walls, plasma density measurement is possible when the 80-mm diameter ports are available. In this contribution, we discuss the numerical simulations, the preliminary experimental tests and suggest design upgrades of the interferometric setup to enhance signal transmission.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Measure of negative ion density in a large negative ion source using Langmuir probes
Authors:
Carlo Poggi,
Monica Spolaore,
Marco Barbisan,
Matteo Brombin,
Roberto Cavazzana,
Nicolò Marconato,
Roberto Pasqualotto,
Antonio Pimazzoni,
Emanuele Sartori,
Gianluigi Serianni
Abstract:
Neutral Beam Injectors (NBIs) based on negative ions are the workhorses of future fusion reactors, such as ITER, which they are expected to provide with up to \SI{33}{MW} of power to heat the fusion plasma. The negative hydrogen ions are extracted from a RF plasma, in which a magnetic filter field cools down the electrons reaching the so-called expansion region and allows the formation of negative…
▽ More
Neutral Beam Injectors (NBIs) based on negative ions are the workhorses of future fusion reactors, such as ITER, which they are expected to provide with up to \SI{33}{MW} of power to heat the fusion plasma. The negative hydrogen ions are extracted from a RF plasma, in which a magnetic filter field cools down the electrons reaching the so-called expansion region and allows the formation of negative ions near the apertures in the plasma grid. To further improve the production of negative ions, cesium is usually evaporated inside the source and deposited onto the plasma walls, reducing the work function of the surfaces. This dramatically increases the density of negative hydrogen ions near the surfaces, causing the transition to an electronegative plasma in the vicinity of the plasma grid. This condition can be observed with Langmuir probes, which can then be used to provide a local meaurement of negative ion density in the ion source.
In this paper we use the measurements provided by the Langmuir probe sensors embedded in the plasma grid of SPIDER, the prototype ion source of ITER NBIs, to determine the density of negative ions. A fitting method based on the determination of the collection area of the different plasma species is proposed and adapted to SPIDER experimental condition, taking into account the shape of the probes and the local topology of the magnetic field. The method is then applied to the experimental data, determining the densities of the positive and negative ions and of the electrons during a plasma pulse. Finally, a vertical array of four probes in the plasma grid is used to assess the vertical profile of plasma parameters.
△ Less
Submitted 12 July, 2023; v1 submitted 23 February, 2023;
originally announced February 2023.
-
Diagnostic data integration using deep neural networks for real-time plasma analysis
Authors:
A. Rigoni Garola,
R. Cavazzana,
M. Gobbin,
R. S. Delogu,
G. Manduchi,
C. Taliercio,
A. Luchetta
Abstract:
Recent advances in acquisition equipment is providing experiments with growing amounts of precise yet affordable sensors. At the same time an improved computational power, coming from new hardware resources (GPU, FPGA, ACAP), has been made available at relatively low costs. This led us to explore the possibility of completely renewing the chain of acquisition for a fusion experiment, where many hi…
▽ More
Recent advances in acquisition equipment is providing experiments with growing amounts of precise yet affordable sensors. At the same time an improved computational power, coming from new hardware resources (GPU, FPGA, ACAP), has been made available at relatively low costs. This led us to explore the possibility of completely renewing the chain of acquisition for a fusion experiment, where many high-rate sources of data, coming from different diagnostics, can be combined in a wide framework of algorithms. If on one hand adding new data sources with different diagnostics enriches our knowledge about physical aspects, on the other hand the dimensions of the overall model grow, making relations among variables more and more opaque. A new approach for the integration of such heterogeneous diagnostics, based on composition of deep variational autoencoders, could ease this problem, acting as a structural sparse regularizer. This has been applied to RFX-mod experiment data, integrating the soft X-ray linear images of plasma temperature with the magnetic state.
However to ensure a real-time signal analysis, those algorithmic techniques must be adapted to run in well suited hardware. In particular it is shown that, attempting a quantization of neurons transfer functions, such models can be modified to create an embedded firmware. This firmware, approximating the deep inference model to a set of simple operations, fits well with the simple logic units that are largely abundant in FPGAs. This is the key factor that permits the use of affordable hardware with complex deep neural topology and operates them in real-time.
△ Less
Submitted 7 May, 2021; v1 submitted 28 October, 2020;
originally announced October 2020.
-
A Zynq-based flexible ADC architecture combining real-time data streaming and transient recording
Authors:
Andrea Rigoni Garola,
Gabriele Manduchi,
Marco Gottado,
Roberto Cavazzana,
Mauro Recchia,
Cesare Taliercio,
Adriano Luchetta
Abstract:
The RFX-mod2 Nuclear Fusion experiment is an upgrade of RFX-mod, shutdown in 2016. Among the other improvements in the machine structure and diagnostics, a larger number of electromagnetic probes (EMs) is foreseen to provide more information about plasma instabilities and to allow an improved real-time plasma control. An Analog to Digital Converter (ADC) architecture able to provide at the same ti…
▽ More
The RFX-mod2 Nuclear Fusion experiment is an upgrade of RFX-mod, shutdown in 2016. Among the other improvements in the machine structure and diagnostics, a larger number of electromagnetic probes (EMs) is foreseen to provide more information about plasma instabilities and to allow an improved real-time plasma control. An Analog to Digital Converter (ADC) architecture able to provide at the same time both transient recording and real-time streaming, as well as FPGA-based time integration of the inputs is foreseen in RFX-mod2. Transient recording provides full speed data acquisition (up to 1 MSample/s) by recording data in local memory and reading memory content after the plasma discharge. Real-time streaming of sub-sampled data is required for active control. The chosen technology is based on the XILINX Zynq architecture that provides in the same chip a multi-core ARM processor tightly coupled to a FPGA.
Time critical functions are carried out by the FPGA, such as the management of the circular data buffer, low pass filtering for subsampling of the samples to be streamed and digital integration. Other functions are carried out by the processor, such as the management of the configuration setting, received via TCP/IP or HTTP, the data readout of acquired samples in transient recording buffers and network data streaming of data collected for active real-time plasma control.
△ Less
Submitted 21 June, 2018;
originally announced June 2018.
-
Evaluation of noise limits of a precision ADC for direct digital signal integration of magnetic measurements
Authors:
Roberto Cavazzana,
Marco Gottardo,
Andrea Rigoni Garola
Abstract:
The characterization of laboratory plasma instabilities, magnetic reconnection and turbulence associated phenomena, require the simultaneous signal sampling from arrays of magnetic sensors (hundreds or even thousands) to obtain spatial resolution, with several hundred kHz for time resolution. Magnetic measurements based on pick-up (Mirnov) coil are quite common in experimental pulsed devices for p…
▽ More
The characterization of laboratory plasma instabilities, magnetic reconnection and turbulence associated phenomena, require the simultaneous signal sampling from arrays of magnetic sensors (hundreds or even thousands) to obtain spatial resolution, with several hundred kHz for time resolution. Magnetic measurements based on pick-up (Mirnov) coil are quite common in experimental pulsed devices for plasma research, thanks to their simplicity and reliability. Being the signal from this type of sensor proportional to the time variation of the magnetic field ($dB/dt$), it has to be time-integrated to recover the instant value of magnetic field. Depending on the required integration time usually either analog integrators or chopped integrators are used. However these solutions tend to limit the frequency bandwidth in the kHz range, they are not easy to design and build, and require additional fast channels to directly acquire the $dB/dt$ signal to recover the plasma dynamic features at higher frequencies. In this paper we evaluate the feasibility of using a direct single channel precision ADC to allow the simultaneous acquisition of $dB/dt$ measurements and to provide the integrated B measurement by means of digital integration on the new RFX-mod2 device. On this purpose we interfaced an existing ADC-module to a Xilinx Zynq FPGA, in order to evaluate the intrinsic noise and to investigate the feasible integration window of this configuration. The result opens the door to a compact, cost-effective and reliable acquisition system, usable for simultaneous real-time control and transient signal recording, scalable from tenths to thousands channels, applicable to a broad class of pulsed plasma experimental devices.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
An active feedback recovery technique from disruption events induced by m=2 n=1 tearing modes in ohmically heated tokamak plasmas
Authors:
P. Zanca,
R. Paccagnella,
C. Finotti,
A. Fassina,
G. Manduchi,
R. Cavazzana,
P. Franz,
C. Piron,
L. Piron
Abstract:
We present experimental results of magnetic feedback control on the m=2, n=1 tearing mode in RFX-mod operated as a circular ohmically heated tokamak. The feedback suppression of the non-resonant m=2, n=1 Resistive Wall Mode (RWM) in q(a)<2 plasmas is a well-established result of RFX-mod. The control of the tearing counterpart, which develops in q(a)>2 equilibrium, is instead a more difficult issue…
▽ More
We present experimental results of magnetic feedback control on the m=2, n=1 tearing mode in RFX-mod operated as a circular ohmically heated tokamak. The feedback suppression of the non-resonant m=2, n=1 Resistive Wall Mode (RWM) in q(a)<2 plasmas is a well-established result of RFX-mod. The control of the tearing counterpart, which develops in q(a)>2 equilibrium, is instead a more difficult issue. In fact, the disruption induced by a growing amplitude m=2, n=1 tearing mode can be prevented by feedback only when the resonant surface q=2 is close to the plasma edge, namely 2<q(a)<2.5, and the electron density does not exceed approximately half of the Greenwald limit. A combined technique of tearing mode and q(a) control has been therefore developed to recover the discharge from the most critical conditions: the potentially disruptive tearing mode is converted into the relatively benign RWM by suddenly decreasing q(a) below 2. The experiments demonstrate the concept with 100% of successful cases. The q(a) control has been performed through the plasma current, given the capability of the toroidal loop-voltage power supply of RFX-mod. We also propose a path for controlling q(a) by acting on the plasma shape, which could be applied to medium size elongated tokamaks.
△ Less
Submitted 3 March, 2015;
originally announced March 2015.
-
Spatiotemporal synchronization of drift waves in a magnetron sputtering plasma
Authors:
E. Martines,
M. Zuin,
R. Cavazzana,
J. Adámek,
V. Antoni,
G. Serianni,
M. Spolaore,
N. Vianello
Abstract:
A feedforward scheme is applied for drift waves control in a magnetized magnetron sputtering plasma. A system of driven electrodes collecting electron current in a limited region of the explored plasma is used to interact with unstable drift waves. Drift waves actually appear as electrostatic modes characterized by discrete wavelengths of the order of few centimeters and frequencies of about 100 k…
▽ More
A feedforward scheme is applied for drift waves control in a magnetized magnetron sputtering plasma. A system of driven electrodes collecting electron current in a limited region of the explored plasma is used to interact with unstable drift waves. Drift waves actually appear as electrostatic modes characterized by discrete wavelengths of the order of few centimeters and frequencies of about 100 kHz. The effect of external quasi-periodic, both in time and space, travelling perturbations is studied. Particular emphasis is given to the role played by the phase relation between the natural and the imposed fluctuations. It is observed that it is possible by means of localized electrodes, collecting currents which are negligible with respect to those flowing in the plasma, to transfer energy to one single mode and to reduce that associated to the others. Due to the weakness of the external action, only partial control has been achieved.
△ Less
Submitted 11 April, 2014;
originally announced April 2014.
-
Direct observation of current in type I ELM filaments on Asdex Upgrade
Authors:
N. Vianello,
V. Naulin,
R. Schrittwieser,
H. W. Muller,
M. Zuin,
C. Ionita,
J. J. Rasmussen,
F. Mehlmann,
V. Rohde,
R. Cavazzana,
M. Maraschek
Abstract:
Magnetically confined plasmas are often subject to relaxation oscillations accompanied by large transport events. This is particularly the case for the high confinement regime of tokamaks where these events are termed edge localized modes (ELMs). They result in the temporary breakdown of the high confinement and lead to high power loads on plasma facing components. Present theories of ELM generati…
▽ More
Magnetically confined plasmas are often subject to relaxation oscillations accompanied by large transport events. This is particularly the case for the high confinement regime of tokamaks where these events are termed edge localized modes (ELMs). They result in the temporary breakdown of the high confinement and lead to high power loads on plasma facing components. Present theories of ELM generation rely on a combined effect of edge currents and the edge pressure gradient exceeding critical values which result in intermediate mode number ($n \cong 10-15$) structures (\emph{filaments}) localized in the perpendicular plane and extended along the field line. It is shown here by detailed localized measurements of the three components of the magnetic field perturbation carried by an individual type I ELM filament that these filaments carry a substantial current. The observations provide essential information for the understanding of ELM dynamics.
△ Less
Submitted 14 January, 2011; v1 submitted 13 October, 2009;
originally announced October 2009.
-
Resistive g-modes in a reversed field pinch plasma
Authors:
M. Zuin,
S. Spagnolo,
R. Paccagnella,
E. Martines,
R. Cavazzana,
G. Serianni,
M. Spolaore,
N. Vianello
Abstract:
First direct experimental evidence of high frequency, high toroidal mode number (n>20), magnetic fluctuations due to unstable resistive interchange modes (g-modes) resonant in the edge region of a reversed field pinch (RFP) plasma is presented. Experimental characterization of time and space periodicities of the modes is provided by means of highly resolved in-vessel edge and insertable magnetic…
▽ More
First direct experimental evidence of high frequency, high toroidal mode number (n>20), magnetic fluctuations due to unstable resistive interchange modes (g-modes) resonant in the edge region of a reversed field pinch (RFP) plasma is presented. Experimental characterization of time and space periodicities of the modes is provided by means of highly resolved in-vessel edge and insertable magnetic diagnostics. It is found that the spectral mode properties are in good agreement with the predictions of the theoretical linear resistive magnetohydrodynamic stability analysis. A simple model is proposed for the observed saturation levels of the modes.
△ Less
Submitted 11 September, 2009;
originally announced September 2009.
-
Drift-Alfven vortex structures in the edge region of a fusion relevant plasma
Authors:
N. Vianello,
M. Spolaore,
E. Martines,
R. Cavazzana,
G. Serianni,
M. Zuin,
E. Spada,
V. Antoni
Abstract:
Edge turbulent structures are commonly observed in fusion devices and are generally believed to be responsible for confinement degradation. Among their origin Drift-Alfven turbulence is one of the most commonly suggested. Drift-Alfven paradigm allows the existence of localized vortex-like structures observed also in various systems. Here we present the evidence of the presence of drift-Alfvén vo…
▽ More
Edge turbulent structures are commonly observed in fusion devices and are generally believed to be responsible for confinement degradation. Among their origin Drift-Alfven turbulence is one of the most commonly suggested. Drift-Alfven paradigm allows the existence of localized vortex-like structures observed also in various systems. Here we present the evidence of the presence of drift-Alfvén vortices in the edge region of RFX-Mod RFP device, showing how these structures are responsible for electromagnetic turbulence at the edge and its intermittent nature.
△ Less
Submitted 11 June, 2009; v1 submitted 30 April, 2009;
originally announced April 2009.
-
About the parabolic relation existing between the skewness and the kurtosis in time series of experimental data
Authors:
F. Sattin,
M. Agostini,
R. Cavazzana,
G. Serianni,
P. Scarin,
N. Vianello
Abstract:
In this work we investigate the origin of the parabolic relation between skewness and kurtosis often encountered in the analysis of experimental time-series. We argue that the numerical values of the coefficients of the curve may provide informations about the specific physics of the system studied, whereas the analytical curve per se is a fairly general consequence of a few constraints expected…
▽ More
In this work we investigate the origin of the parabolic relation between skewness and kurtosis often encountered in the analysis of experimental time-series. We argue that the numerical values of the coefficients of the curve may provide informations about the specific physics of the system studied, whereas the analytical curve per se is a fairly general consequence of a few constraints expected to hold for most systems.
△ Less
Submitted 12 February, 2009;
originally announced February 2009.
-
On the statistics of edge fluctuations: comparative study between various fusion devices
Authors:
F. Sattin,
M. Agostini,
P. Scarin,
N. Vianello,
R. Cavazzana,
L. Marrelli,
G. Serianni,
S. J. Zweben,
R. J. Maqueda,
Y. Yagi,
H. Sakakita,
H. Koguchi,
S. Kiyama,
Y. Hirano,
J. L. Terry
Abstract:
In this paper we present a statistical study of edge fluctuations taken with the Gas Puffing Imaging (GPI) diagnostics. We carry out a comparison of GPI signal from an extensive database including four devices (two Tokamaks and two Reversed Field Pinches). The data are analyzed in terms of their statistical moments Skewness and Kurtosis, as done in [B. Labit, et al, Phys. Rev. Lett. \textbf{98},…
▽ More
In this paper we present a statistical study of edge fluctuations taken with the Gas Puffing Imaging (GPI) diagnostics. We carry out a comparison of GPI signal from an extensive database including four devices (two Tokamaks and two Reversed Field Pinches). The data are analyzed in terms of their statistical moments Skewness and Kurtosis, as done in [B. Labit, et al, Phys. Rev. Lett. \textbf{98}, 255002 (2007)]. The data align along parabolic curves, although different from machine to machine, with some spread around the best-fitting curve. A discussion about the meaning of the parabolic trend as well as the departure of real data from it is provided. A phenomenological model is finally provided, attempting to accomodate experimental evidence.
△ Less
Submitted 12 February, 2009;
originally announced February 2009.
-
Statistical features of edge turbulence in RFX-mod from Gas Puffing Imaging
Authors:
F. Sattin,
P. Scarin,
M. Agostini,
R. Cavazzana,
G. Serianni,
M. Spolaore,
N. Vianello
Abstract:
Plasma density fluctuations in the edge plasma of the RFX-mod device are measured through the Gas Puffing Imaging Diagnostics. Statistical features of the signal are quantified in terms of the Probability Distribution Function (PDF), and computed for several kinds of discharges. The PDFs from discharges without particular control methods are found to be adequately described by a Gamma function,…
▽ More
Plasma density fluctuations in the edge plasma of the RFX-mod device are measured through the Gas Puffing Imaging Diagnostics. Statistical features of the signal are quantified in terms of the Probability Distribution Function (PDF), and computed for several kinds of discharges. The PDFs from discharges without particular control methods are found to be adequately described by a Gamma function, consistently with the recent results by Graves et al [J.P. Graves, et al, Plasma Phys. Control. Fusion 47, L1 (2005)]. On the other hand, pulses with external methods for plasma control feature modified PDFs. A first empirical analysis suggests that they may be interpolated through a linear combination of simple functions. An inspection of the literature shows that this kind of PDFs is common to other devices as well, and has been suggested to be due to the simultaneous presence of different mechanisms driving respectively coherent bursts and gaussian background turbulence. An attempt is made to relate differences in the PDFs to plasma conditions such as the local shift of the plasma column. A simple phenomenological model to interpret the nature of the PDF and assign a meaning to its parameters is also developed.
△ Less
Submitted 30 June, 2006;
originally announced June 2006.
-
To what extent can dynamical models describe statistical features of turbulent flows?
Authors:
V. Carbone,
R. Cavazzana,
V. Antoni,
L. Sorriso-Valvo,
E. Spada,
G. Regnoli,
P. Giuliani,
N. Vianello,
F. Lepreti,
R. Bruno,
E. Martines,
P. Veltri
Abstract:
Statistical features of "bursty" behaviour in charged and neutral fluid turbulence, are compared to statistics of intermittent events in a GOY shell model, and avalanches in different models of Self Organized Criticality (SOC). It is found that inter-burst times show a power law distribution for turbulent samples and for the shell model, a property which is shared only in a particular case of th…
▽ More
Statistical features of "bursty" behaviour in charged and neutral fluid turbulence, are compared to statistics of intermittent events in a GOY shell model, and avalanches in different models of Self Organized Criticality (SOC). It is found that inter-burst times show a power law distribution for turbulent samples and for the shell model, a property which is shared only in a particular case of the running sandpile model. The breakdown of self-similarity generated by isolated events observed in the turbulent samples, is well reproduced by the shell model, while it is absent in all SOC models considered. On this base, we conclude that SOC models are not adequate to mimic fluid turbulence, while the GOY shell model constitutes a better candidate to describe the gross features of turbulence.
△ Less
Submitted 19 April, 2002;
originally announced April 2002.
