-
Experimental control of Tollmien-Schlichting waves using the Wiener-Hopf formalism
Authors:
Diego B. S. Audiffred,
André V. G. Cavalieri,
Pedro P. C. Brito,
Eduardo Martini
Abstract:
Reactive flow control has been shown as a promising tool to improve, among other aspects, the aerodynamic characteristics of an aircraft. This paper focuses on the use of reactive flow control to attenuate Tollmien-Schlichting (TS) waves over a wing profile. TS waves are an instability mechanism that is one of the first stages of boundary layer transition to turbulence. The Wiener-Hopf technique w…
▽ More
Reactive flow control has been shown as a promising tool to improve, among other aspects, the aerodynamic characteristics of an aircraft. This paper focuses on the use of reactive flow control to attenuate Tollmien-Schlichting (TS) waves over a wing profile. TS waves are an instability mechanism that is one of the first stages of boundary layer transition to turbulence. The Wiener-Hopf technique was used in this work for the experimental boundary layer control. The approach improves previous wave-cancellation techniques that, by constructing control kernels in the frequency domain, lead to control kernels with a non-causal part, i.e., actuation would need future sensor information to be constructed. In practical applications, it is unfeasible to access this type of information. Ignoring the non-causal part of the kernel leads to suboptimal solutions that might significantly degrade the performance of the controller. The Wiener-Hopf formalism allows us to take into account causality constraints in the formulation of the control problem, leading to an optimal realistic solution and a control kernel that is causal by construction. Moreover, it is possible to construct the control strategy based only on the power and cross-spectra obtained experimentally, in a data-driven approach. The present work shows how to apply experimentally the Wiener-Hopf resolvent-based formalism using signals from a wind tunnel experiment, demonstrating that the Tollmien-Schlichting waves can be effectively attenuated via a Wiener-Hopf based controller, which yielded better results than a typical wave-cancellation approach.
△ Less
Submitted 16 February, 2024;
originally announced February 2024.
-
Reactive experimental control of turbulent jets
Authors:
Diego B. S. Audiffred,
André V. G. Cavalieri,
Igor A. Maia,
Eduardo Martini,
Peter Jordan
Abstract:
We present an experimental study of reactive control of turbulent jets. We target axisymmetric disturbances associated with coherent structures, which are known to underpin the peak sound radiation of turbulent jets. We first consider a forced jet flow case, such that the coherent structures can be amplified above background levels, which makes it easier to detect them by the sensors. We then cons…
▽ More
We present an experimental study of reactive control of turbulent jets. We target axisymmetric disturbances associated with coherent structures, which are known to underpin the peak sound radiation of turbulent jets. We first consider a forced jet flow case, such that the coherent structures can be amplified above background levels, which makes it easier to detect them by the sensors. We then consider the more challenging case of a natural jet, i.e., without artificial forcing. The control strategy explores linear convective mechanisms in the initial jet region, which justifies application of linear control theory. The control law is constructed in the frequency domain, based on empirically determined transfer functions. The Wiener-Hopf formalism is used to enforce causality, providing an optimal causal solution, thus, preventing the drop in performance that may be observed in flow control applications that use simpler wave-cancellation methods. With this approach, we could improve the control performance of forced turbulent jets compared to results obtained in previous studies, attaining order-of-magnitude attenuation of power spectra of velocity fluctuations. Furthermore, we could obtain substantial levels of attenuation of natural turbulent jets, of about 60% in power spectra for the most amplified frequencies. These results open new directions for the control of turbulent flows.
△ Less
Submitted 16 February, 2024;
originally announced February 2024.
-
Linear and nonlinear receptivity mechanisms in boundary layers subject to free-stream turbulence
Authors:
Diego C. P. Blanco,
Ardeshir Hanifi,
Dan S. Henningson,
André V. G. Cavalieri
Abstract:
Large-eddy simulations of a flat-plate boundary layer, without a leading edge, subject to multiple levels of incoming free stream turbulence are considered in the present work. Within an input-output model where non-linear terms of the incompressible Navier-Stokes equations are treated as an external forcing, we manage to separate inputs related to perturbations coming through the intake of the nu…
▽ More
Large-eddy simulations of a flat-plate boundary layer, without a leading edge, subject to multiple levels of incoming free stream turbulence are considered in the present work. Within an input-output model where non-linear terms of the incompressible Navier-Stokes equations are treated as an external forcing, we manage to separate inputs related to perturbations coming through the intake of the numerical domain, whose evolution represents a linear mechanism, and the volumetric non-linear forcing due to triadic interactions. With these, we perform the full reconstruction of the statistics of the flow, as measured in the simulations, to quantify pairs of wavenumbers and frequencies more affected by either linear or non-linear receptivity mechanisms. Inside the boundary layer, different wavenumbers at near-zero frequency reveal streaky structures. Those that are amplified predominantly via linear interactions with the incoming vorticity occur upstream and display transient growth, while those generated by the non-linear forcing are the most energetic and appear in more downstream positions. The latter feature vortices growing proportionally to the laminar boundary layer thickness, along with a velocity profile that agrees with the optimal amplification obtained by linear transient growth theory. The numerical approach presented is general and could potentially be extended to any simulation for which receptivity to incoming perturbations needs to be assessed.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Improved convergence of the spectral proper orthogonal decomposition through time shifting
Authors:
Diego C. P. Blanco,
Eduardo Martini,
Kenzo Sasaki,
André V. G. Cavalieri
Abstract:
Spectral proper orthogonal decomposition (SPOD) is an increasingly popular modal analysis method in the field of fluid dynamics due to its specific properties: a linear system forced with white noise should have SPOD modes identical to response modes from resolvent analysis. The SPOD, coupled with the Welch method for spectral estimation, may require long time-resolved data sets. In this work, a l…
▽ More
Spectral proper orthogonal decomposition (SPOD) is an increasingly popular modal analysis method in the field of fluid dynamics due to its specific properties: a linear system forced with white noise should have SPOD modes identical to response modes from resolvent analysis. The SPOD, coupled with the Welch method for spectral estimation, may require long time-resolved data sets. In this work, a linearised Ginzburg-Landau model is considered in order to study the method's convergence. SPOD modes of the white-noise forced equation are computed and compared with corresponding response resolvent modes. The quantified error is shown to be related to the time length of Welch blocks (spectral window size) normalised by a convective time. Subsequently, an algorithm based on a temporal data shift is devised to further improve SPOD convergence and is applied to the Ginzburg-Landau system. Next, its efficacy is demonstrated in a numerical database of a boundary layer subject to bypass transition. The proposed approach achieves substantial improvement in mode convergence with smaller spectral window sizes with respect to the standard method. Furthermore, SPOD modes display growing wall-normal and span-wise velocity components along the stream-wise direction, a feature which had not yet been observed and is also predicted by a global resolvent calculation. The shifting algorithm for the SPOD opens the possibility for using the method on datasets with time series of moderate duration, often produced by large simulations.
△ Less
Submitted 19 February, 2024; v1 submitted 10 December, 2023;
originally announced December 2023.
-
Modal-based generalised quasilinear approximations for turbulent plane Couette flow
Authors:
Igor A. Maia,
André V. G. Cavalieri
Abstract:
We study generalised quasilinear (GQL) approximations applied to turbulent plane Couette flow. The GQL framework is explored in conjunction with a Galerkin reduced-order model (ROM) recently developed by Cavalieri & Nogueira (Phys. Rev. Fluids 7, L102601, 2022), which considers controllability modes of the linearised Navier-Stokes system as basis functions, representing coherent structures in the…
▽ More
We study generalised quasilinear (GQL) approximations applied to turbulent plane Couette flow. The GQL framework is explored in conjunction with a Galerkin reduced-order model (ROM) recently developed by Cavalieri & Nogueira (Phys. Rev. Fluids 7, L102601, 2022), which considers controllability modes of the linearised Navier-Stokes system as basis functions, representing coherent structures in the flow. The velocity field is decomposed into two groups: one composed by high-controllability modes and the other by low-controllability modes. The former group is solved with the full nonlinear equations, whereas the equations for the latter are linearised. We also consider a modified GQL framework, wherein the linearised equations for the low-controllability modes are driven by nonlinear interactions of modes in the first group, which are characterised by large-scale coherent structures. It is shown that GQL-ROMs successfully recover the statistics of the full model with relatively high controllability thresholds and sparser nonlinear operators. Driven GQL-ROMs were found to converge more rapidly, providing accurate description of the statistics with a larger number of linearised modes with respect to standard GQL approximations. The results presented here show that further model reductions are attainable with GQL-ROMs, which can be valuable to extend these models to larger Reynolds numbers.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
On the Low-Frequency Dynamics of Turbulent Separation Bubbles
Authors:
C. Cura,
A. Hanifi,
A. V. G. Cavalieri,
J. Weiss
Abstract:
The low-frequency modal and non-modal stability characteristics of an incompressible, pressure-gradient-induced turbulent separation bubble (TSB) are investigated with the objective of studying the mechanism responsible for the low-frequency contraction and expansion (breathing) commonly observed in experimental studies. The configuration of interest is a TSB generated on a flat test surface by a…
▽ More
The low-frequency modal and non-modal stability characteristics of an incompressible, pressure-gradient-induced turbulent separation bubble (TSB) are investigated with the objective of studying the mechanism responsible for the low-frequency contraction and expansion (breathing) commonly observed in experimental studies. The configuration of interest is a TSB generated on a flat test surface by a succession of adverse and favourable pressure gradients. The base flow selected for the analysis is the average TSB from the direct numerical simulation of Coleman et al. (J. Fluid Mech., vol. 847, 2018). Global linear stability analysis reveals that the flow is globally stable for wavenumbers. The mode closest to the stability threshold appears to occur at zero frequency and low, non-zero spanwise wavenumber. Resolvent analysis is then employed to examine the forced dynamics of the flow. At low frequency, a region of low, non-zero spanwise wavenumber is also discernible, where the receptivity appears to be driven by the identified weakly damped global mode. The results from resolvent analysis are compared to the unsteady experimental database of Le Floc'h et al. (J. Fluid Mech., vol. 902, 2020) in a similar TSB flow. The alignment between the optimal response and the first spectral proper orthogonal decomposition mode computed from the experiments is shown to exceed 95 %, while the spanwise wavenumber of the optimal response is consistent with that of the low-frequency breathing motion captured experimentally. This indicates that the fluctuations observed experimentally at low frequency closely match the response computed from resolvent analysis. Based on these results, we propose that the forced dynamics of the flow, driven by the weakly damped global mode, serve as a plausible mechanism for the origin of the low-frequency breathing motion commonly observed in experimental studies of TSBs.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Widest scales in turbulent channels
Authors:
Ramón Pozuelo,
André V. G. Cavalieri,
Philipp Schlatter,
Ricardo Vinuesa
Abstract:
The widest spanwise scales in turbulent channel flows are studied through the use of three periodic channel-flow simulations at friction Reynolds number $\mathrm{Re}_τ=550$. The length and height of the channels are the same in all cases ($L_x/h=8π$ and $L_y/h=2$ respectively), while the width is progressively doubled: $L_z/h = \{4π, 8π, 16π\}$. The effects of increasing the domain can not be dete…
▽ More
The widest spanwise scales in turbulent channel flows are studied through the use of three periodic channel-flow simulations at friction Reynolds number $\mathrm{Re}_τ=550$. The length and height of the channels are the same in all cases ($L_x/h=8π$ and $L_y/h=2$ respectively), while the width is progressively doubled: $L_z/h = \{4π, 8π, 16π\}$. The effects of increasing the domain can not be determined with statistical significance in our simulations, since the difference in the statistics between the simulations is of the same order as the errors of convergence. A channel flow similar to the smaller one ($\textit{J. Fluid Mech.}$, vol. 500, 2004, pp. 135--144), which was averaged over a very long time, was used as a reference. The one-dimensional spanwise spectrum of the streamwise velocity is computed with the aim of assessing the domain-size effect on the widest scales. Our results indicate that $90\%$ of the total streamwise energetic fluctuations is recovered without a significant influence of the size of the domain. The remaining $10\%$ of the energy reflects that the widest scales in the outer layer are the ones most significantly affected by the spanwise length of the domain. The power-spectral density for $k_z = 0$ remains constant even if the size of the domain in the spanwise direction is increased up to 4 times the standard spanwise length, indicating that wide, spanwise coherent structures are not an artifact of domain truncation.
△ Less
Submitted 6 July, 2023;
originally announced July 2023.
-
Multi-scale invariant solutions in plane Couette flow: a reduced-order model approach
Authors:
Matthew McCormack,
André V. G. Cavalieri,
Yongyun Hwang
Abstract:
Plane Couette flow at Re=1200 (based on the channel half-height and half the velocity difference between the top and bottom plates) is investigated with a spatial domain designed to retain only two spanwise integral length scales. In this system, the computation of invariant solutions that are physically representative of the turbulent state has been understood to be challenging. To address this c…
▽ More
Plane Couette flow at Re=1200 (based on the channel half-height and half the velocity difference between the top and bottom plates) is investigated with a spatial domain designed to retain only two spanwise integral length scales. In this system, the computation of invariant solutions that are physically representative of the turbulent state has been understood to be challenging. To address this challenge, our approach is to employ an accurate reduced-order model with 600 degrees of freedom (Cavalieri & Nogueira, {Phys. Rev. Fluids}, vol. 7, 2022, L102601). Using the two-scale energy budget and the temporal cross-correlation of key observables, it is first demonstrated that the model contains most of the multi-scale physical processes identified recently (Doohan et al., J. Fluid Mech., vol. 913, 2021, A8): i.e. the large- and small-scale self-sustaining processes, the energy cascade for turbulent dissipation, and an energy-cascade mediated small-scale production mechanism. Invariant solutions of the reduced-order model are subsequently computed, including 96 equilibria and 43 periodic orbits. It is found that none of the computed equilibrium solutions are able to reproduce an accurate energy balance associated with the multi-scale dynamics of turbulent state. Incorporation of unsteadiness into invariant solutions is seen to be essential for a sensible description of the multi-scale turbulent dynamics and the related energetics, at least in this type of flow, as periodic orbits with a sufficiently long period are mainly able to describe the complex spatiotemporal dynamics associated with the known multi-scale phenomena.
△ Less
Submitted 1 February, 2024; v1 submitted 29 June, 2023;
originally announced June 2023.
-
LES-informed resolvent-based estimation of turbulent pipe flow
Authors:
Filipe Ramos do Amaral,
André Valdetaro Gomes Cavalieri
Abstract:
A resolvent-based methodology is employed to obtain spatio--temporal estimates of turbulent pipe flow from probe measurements of wall shear-stress fluctuations. Direct numerical simulations (DNS) and large-eddy simulations (LES) of turbulent pipe flow at friction Reynolds number of 550 are used as databases. We consider a DNS database as the true spatio--temporal flow field, from which wall shear-…
▽ More
A resolvent-based methodology is employed to obtain spatio--temporal estimates of turbulent pipe flow from probe measurements of wall shear-stress fluctuations. Direct numerical simulations (DNS) and large-eddy simulations (LES) of turbulent pipe flow at friction Reynolds number of 550 are used as databases. We consider a DNS database as the true spatio--temporal flow field, from which wall shear-stress fluctuations are extracted and considered as measurements. A resolvent-based estimator is built following our earlier work (Amaral et al. J. Fluid Mech., vol. 927, 2021, p. A17), requiring a model for the nonlinear (or forcing) terms of the Navier-Stokes equations system, which are obtained from another DNS database, as in our earlier work, and from a series of computationally cheaper LES databases with coarser grids; the underlying idea is that LES may provide accurate statistics of non-linear terms related to large-scale structures at a low computational cost. Comparisons between the DNS and the estimates indicate that sufficiently accurate results can be achieved with estimators built with statistics from LES with an order of magnitude less grid points than the DNS, with estimates closely matching the reference DNS results up to the buffer layer and reasonable agreement up to the beginning of the log layer.
△ Less
Submitted 6 July, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Modal decomposition of nonlinear interactions in wall turbulence
Authors:
Ugur Karban,
Eduardo Martini,
André V. G. Cavalieri,
Peter Jordan
Abstract:
Coherent structures are found in many different turbulent flows and are known to drive self-sustaining processes in wall turbulence. Identifying the triadic interactions which generate coherent structures can provide insights beyond what is possible with linearized models. There are infinite possible interactions that may generate a given structure. Thus, a method to systematically study those, ra…
▽ More
Coherent structures are found in many different turbulent flows and are known to drive self-sustaining processes in wall turbulence. Identifying the triadic interactions which generate coherent structures can provide insights beyond what is possible with linearized models. There are infinite possible interactions that may generate a given structure. Thus, a method to systematically study those, ranking them in terms of their contribution to the structure of interest, is essential. We here use the resolvent-based extended spectral proper orthogonal decomposition (RESPOD) approach (Karban, U. et al. 2022 Self-similar mechanisms in wall turbulence studied using resolvent analysis. Journal of Fluid Mechanics 969, A36) to rank the triadic interactions which give rise to the dominant coherent structures in minimal Couette flows at Reynolds number 400 and 1000. Our analysis identifies that six triadic interactions dominate the most energetic coherent structure, revealing the capability of the methodology to identify and rank nonlinear interactions. The approach can be used to analyse the energy exchange in turbulent flows and may guide the construction of reduced-order models based on the interplay between different flow modes. Based on this framework, we introduce a modelling strategy where the interactions increasing or reducing the energy of a given mode are grouped as sources and sinks, respectively. The effect of the sinks is embedded in the resolvent operator by using an eddy viscosity model. The sources are used for driving this modified resolvent operator and are shown to yield accurate flow predictions at zero frequency. We discuss that this strategy can be useful when analysing nonlinear interactions or modelling forcing at high-Reynolds-number flows.
△ Less
Submitted 17 May, 2024; v1 submitted 3 January, 2023;
originally announced January 2023.
-
Reduced-order Galerkin models of plane Couette flow
Authors:
André V. G. Cavalieri,
Petrônio A. S. Nogueira
Abstract:
Reduced-order models were derived for plane Couette flow using Galerkin projection, with orthonormal basis functions taken as the leading controllability modes of the linearised Navier-Stokes system for a few low wavenumbers. Resulting Galerkin systems comprise ordinary differential equations, with a number of degrees of freedom ranging from 144 to 600, which may be integrated to large times witho…
▽ More
Reduced-order models were derived for plane Couette flow using Galerkin projection, with orthonormal basis functions taken as the leading controllability modes of the linearised Navier-Stokes system for a few low wavenumbers. Resulting Galerkin systems comprise ordinary differential equations, with a number of degrees of freedom ranging from 144 to 600, which may be integrated to large times without sign of numerical instability. The reduced-order models so obtained are also found to match statistics of direct numerical simulations at Reynolds number 500 and 1200 with reasonable accuracy, despite a truncation of orders of magnitude in the degrees of freedom of the system. The present models offer thus an interesting compromise between simplicity and accuracy in a canonical wall-bounded flow, with relatively few modes representing coherent structures in the flow and their dominant dynamics.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Resolvent-based tools for optimal estimation and control via the Wiener-Hopf formalism
Authors:
Eduardo Martini,
Junoh Jung,
André V. G. Cavalieri,
Peter Jordan,
Aaron Towne
Abstract:
The application of control tools to complex flows frequently requires approximations, such as reduced-order models and/or simplified forcing assumptions, where these may be considered low-rank or defined in terms of simplified statistics (e.g. white noise). In this work, we propose a resolvent-based control methodology with causality imposed via a Wiener-Hopf formalism. Linear optimal causal estim…
▽ More
The application of control tools to complex flows frequently requires approximations, such as reduced-order models and/or simplified forcing assumptions, where these may be considered low-rank or defined in terms of simplified statistics (e.g. white noise). In this work, we propose a resolvent-based control methodology with causality imposed via a Wiener-Hopf formalism. Linear optimal causal estimation and control laws are obtained directly from full-rank, globally stable systems with arbitrary disturbance statistics, circumventing many drawbacks of alternative methods. We use efficient, matrix-free methods to construct the matrix Wiener-Hopf problem, and we implement a tailored method to solve the problem numerically. The approach naturally handles forcing terms with space-time colour; it allows inexpensive parametric investigation of sensor/actuator placement in scenarios where disturbances/targets are low rank; it is directly applicable to complex flows disturbed by high-rank forcing; it has lower cost in comparison to standard methods; it can be used in scenarios where an adjoint solver is not available; or it can be based exclusively on experimental data. The method is particularly well-suited for the control of amplifier flows, for which optimal control approaches are typically robust. Validation of the approach is performed using the linearized Ginzburg-Landau equation. Flow over a backward-facing step perturbed by high-rank forcing is then considered. Sensor and actuator placement are investigated for this case, and we show that while the flow response downstream of the step is dominated by the Kelvin-Helmholtz mechanism, it has a complex, high-rank receptivity to incoming upstream perturbations, requiring multiple sensors for control.
△ Less
Submitted 2 January, 2022;
originally announced January 2022.
-
Wave cancellation in jets with laminar and turbulent boundary layers: the effect of nonlinearity
Authors:
Igor A. Maia,
Peter Jordan,
André V. G. Cavalieri
Abstract:
This paper presents a study on wave cancellation in forced jets. Building on recent work on real-time control of forced turbulent jets [1,2], we here assess the effect of jet upstream conditions and nonlinearity on wave-cancellation performance. The experiments are performed in jets with laminar and turbulent boundary layers inside the nozzle. An open-loop campaign is first conducted, in which the…
▽ More
This paper presents a study on wave cancellation in forced jets. Building on recent work on real-time control of forced turbulent jets [1,2], we here assess the effect of jet upstream conditions and nonlinearity on wave-cancellation performance. The experiments are performed in jets with laminar and turbulent boundary layers inside the nozzle. An open-loop campaign is first conducted, in which the goal is to analyse the jet response to stochastic forcing with variable bandwidth. The upstream conditions of the jet are found to have a strong influence on the jet response. For narrow forcing bandwidths, both jets present a clear response regime. However, in the initially-laminar jet, as bandwidth is increased, high growth rates and transition to turbulence in the initial region underpin the onset of nonlinear effects in jet response. In the initially-turbulent jet, on the other hand, lower growth rates allow a linear response regime to be maintained for a broader range of forcing parameters. As the wave cancellation strategy is linear, reactive control is found to be more effective in the initially turbulent jet, consistent with the results of the open-loop analysis.
△ Less
Submitted 29 November, 2021;
originally announced November 2021.
-
Coherent pressure structures in turbulent channel flow
Authors:
F. R. Amaral,
A. V. G. Cavalieri
Abstract:
Most of the studies on pressure fluctuations in wall-bounded turbulent flows aim at obtaining statistics as power spectra and scaling laws, especially at the walls. In the present study we study energetic coherent pressure structures of turbulent channel flows, aiming at a characterization of dominant coherent structures throughout the channel. Coherent structures are detected using spectral prope…
▽ More
Most of the studies on pressure fluctuations in wall-bounded turbulent flows aim at obtaining statistics as power spectra and scaling laws, especially at the walls. In the present study we study energetic coherent pressure structures of turbulent channel flows, aiming at a characterization of dominant coherent structures throughout the channel. Coherent structures are detected using spectral proper orthogonal decomposition (SPOD) and modeled using resolvent analysis, similar to related works dealing with velocity fluctuations, but using pressure fluctuations as the output of interest. The resolvent operator was considered with and without the Cess eddy viscosity model. Direct numerical simulations (DNSs) of incompressible turbulent channel flows at friction Reynolds numbers of approximately 180 and 550 were employed as databases. Three representative dominant structures emerged from a preliminary spectral analysis: near-wall, large-scale and spanwise-coherent structures. For frequency-wavenumber combinations corresponding to these three representative structures, SPOD results show a strong dominance of the leading mode, highlighting low-rank behavior of pressure fluctuations. The leading resolvent mode closely agrees with the first SPOD mode, providing support to studies that showed better performance of resolvent-based estimators when predicting pressure fluctuations compared to velocity fluctuations. The dominant mechanisms of the analyzed modes are seen to be the generation of quasi-streamwise vortices with pressure fluctuations appearing close to vortex centers. A study on the individual contributions of the nonlinear terms (treated as forcing in resolvent analysis) to the pressure output reveals that each forcing component plays a constructive role to the input-output formulation, which also helps understanding the weaker role of forcing color in driving pressure fluctuations.
△ Less
Submitted 11 May, 2024; v1 submitted 24 August, 2021;
originally announced August 2021.
-
Absolute instability in shock-containing jets
Authors:
Petrônio A. S. Nogueira,
Peter Jordan,
Vincent Jaunet,
André V. G. Cavalieri,
Aaron Towne,
Daniel Edgington-Mitchell
Abstract:
We present an analysis of the linear stability characteristics of shock-containing jets. The flow is linearised around a spatially periodic mean, which acts as a surrogate for a mean flow with a shock-cell structure, leading to a set of partial differential equations with periodic coefficients in space. Disturbances are written using the Floquet ansatz and Fourier modes in the streamwise direction…
▽ More
We present an analysis of the linear stability characteristics of shock-containing jets. The flow is linearised around a spatially periodic mean, which acts as a surrogate for a mean flow with a shock-cell structure, leading to a set of partial differential equations with periodic coefficients in space. Disturbances are written using the Floquet ansatz and Fourier modes in the streamwise direction, leading to an eigenvalue problem for the Floquet exponent. The characteristics of the solution are directly compared to the locally parallel case, and some of the features are similar. The inclusion of periodicity induces minor changes in the growth rate and phase velocity of the relevant modes for small shock amplitudes. On the other hand, the eigenfunctions are now subject to modulation related to the periodicity of the flow. Analysis of the spatio-temporal growth rates led to the identification of a saddle point between the Kelvin-Helmholtz mode and the guided jet mode, characterising an absolute instability mechanism. Frequencies and mode shapes related to the saddle points for two conditions (associated with axisymmetric and helical modes) are compared with screech frequencies and the most energetic coherent structures of screeching jets, resulting in a good agreement for both. The analysis shows that a periodic shock-cell structure has an impulse response that grows upstream, leading to oscillator behaviour. The results suggest that screech can occur in the absence of a nozzle, and that the upstream reflection condition is not essential for screech frequency selection. Connections to previous models are also discussed.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Self-similar mechanisms in wall turbulence studied using of resolvent analysis
Authors:
U. Karban,
E. Martini,
A. V. G. Cavalieri,
L. Lesshafft,
P. Jordan
Abstract:
Self-similarity of wall-attached coherent structures in a turbulent channel at $Re_τ=543$ is explored by means of resolvent analysis. In this modelling framework, coherent structures are understood to arise as a response of the linearised mean-flow operator to generalised, frequency-dependent Reynolds stresses, considered to act as an endogenous forcing. We assess the self-similarity of both the w…
▽ More
Self-similarity of wall-attached coherent structures in a turbulent channel at $Re_τ=543$ is explored by means of resolvent analysis. In this modelling framework, coherent structures are understood to arise as a response of the linearised mean-flow operator to generalised, frequency-dependent Reynolds stresses, considered to act as an endogenous forcing. We assess the self-similarity of both the wall-attached flow structures and the associated forcing. The former are educed from direct numerical simulation data by finding the flow field correlated with the wall shear, whereas the latter is identified using a frequency space version of Extended Proper Orthogonal Decomposition (Borée, J. 2003 Extended proper orthogonal decomposition: a tool to analyse correlated events in turbulent flows. Experiments in fluids 35 (2), 188-192). The forcing structures identified are compared to those obtained using the resolvent-based estimation introduced by Towne \emph{et al}. (Towne, A., Lozano-Durán, A. & Yang, X. 2020 Resolvent-based estimation of space-time flow statistics. Journal of Fluid Mechanics 883, A17). The analysis reveals self-similarity of both wall-attached structures$-$in quantitative agreement with Townsend's hypothesis of self-similar attached eddies$-$and the underlying forcing, at least in certain components.
△ Less
Submitted 1 April, 2022; v1 submitted 27 May, 2021;
originally announced May 2021.
-
Transition to chaos in a reduced-order model of a shear layer
Authors:
André V. G. Cavalieri,
Erico L. Rempel,
Petrônio A. S. Nogueira
Abstract:
The present work studies the non-linear dynamics of a shear layer, driven by a body force and confined between parallel walls, a simplified setting to study transitional and turbulent shear layers. It was introduced by Nogueira \& Cavalieri (J. Fluid Mech. 907, A32, 2021), and is here studied using a reduced-order model based on a Galerkin projection of the Navier-Stokes system. By considering a c…
▽ More
The present work studies the non-linear dynamics of a shear layer, driven by a body force and confined between parallel walls, a simplified setting to study transitional and turbulent shear layers. It was introduced by Nogueira \& Cavalieri (J. Fluid Mech. 907, A32, 2021), and is here studied using a reduced-order model based on a Galerkin projection of the Navier-Stokes system. By considering a confined shear layer with free-slip boundary conditions on the walls, periodic boundary conditions in streamwise and spanwise directions may be used, simplifying the system and enabling the use of methods of dynamical systems theory. A basis of eight modes is used in the Galerkin projection, representing the mean flow, Kelvin-Helmholtz vortices, rolls, streaks and oblique waves, structures observed in the cited work, and also present in shear layers and jets. A dynamical system is obtained, and its transition to chaos is studied. Increasing Reynolds number $Re$ leads to pitchfork and Hopf bifurcations, and the latter leads to a limit cycle with amplitude modulation of vortices, as in the DNS by Nogueira \& Cavalieri. Further increase of $Re$ leads to the appearance of a chaotic saddle, followed by the emergence of quasi-periodic and chaotic attractors. The chaotic attractors suffer a merging crisis for higher $Re$, leading to chaotic dynamics with amplitude modulation and phase jumps of vortices. This is reminiscent of observations of coherent structures in turbulent jets, suggesting that the model represents dynamics consistent with features of shear layers and jets.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Wavepacket Modelling of Broadband Shock-Associated Noise in Supersonic Jets
Authors:
Marcus H. Wong,
Peter Jordan,
Igor A. Maia,
André V. G. Cavalieri,
Rhiannon Kirby,
Thales C. L. Fava,
Daniel Edgington-Mitchell
Abstract:
We present a two-point model to investigate the underlying source mechanisms for broadband shock-associated noise (BBSAN) in shock-containing supersonic jets. In the model presented, the generation of BBSAN is assumed to arise from the non-linear interaction between downstream-propagating coherent structures with the quasi-periodic shock cells in the jet plume. The turbulent perturbations are repr…
▽ More
We present a two-point model to investigate the underlying source mechanisms for broadband shock-associated noise (BBSAN) in shock-containing supersonic jets. In the model presented, the generation of BBSAN is assumed to arise from the non-linear interaction between downstream-propagating coherent structures with the quasi-periodic shock cells in the jet plume. The turbulent perturbations are represented as axially-extended wavepackets and the shock cells are modelled as a set of stationary waveguide modes. Unlike previous BBSAN models, the physical parameters describing the hydrodynamic components are not scaled using the acoustic field. Instead, the characteristics of both the turbulent and shock components are educed from large-eddy simulation and particle image velocimetry datasets. Apart from using extracted data, a reduced-order description of the wavepacket structure is obtained using parabolised stability equations (PSE). The validity of the model is tested by comparing far-field sound pressure level predictions to azimuthally-decomposed experimental acoustic data from a cold Mach 1.5 underexpanded jet. At polar angles and frequencies where BBSAN dominates, good agreement in spectral shape and sound amplitude is observed for the first three azimuthal modes. Encouraging comparisons of the radiated noise spectra, in both frequency and amplitude, reinforce the suitability of using reduced-order linear wavepacket sources for predicting BBSAN peaks. On the other hand, the mismatch in sound amplitude at interpeak frequencies reveals the role of wavepacket jitter in the underlying sound generating mechanism.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Causality in the shock wave/turbulent boundary layer interaction
Authors:
Kenzo Sasaki,
Diogo C. Barros,
André V. G. Cavalieri,
Lionel Larchevêque
Abstract:
The mechanisms governing the low-frequency unsteadiness in the shock wave/turbulent boundary layer interaction at Mach 2 are considered. The investigation is conducted based on the numerical database issued from large-eddy simulations covering approximately 300 cycles of the low-frequency shock fluctuations. The evaluation of the spectrum in the interaction zone indicates that the broadband low-fr…
▽ More
The mechanisms governing the low-frequency unsteadiness in the shock wave/turbulent boundary layer interaction at Mach 2 are considered. The investigation is conducted based on the numerical database issued from large-eddy simulations covering approximately 300 cycles of the low-frequency shock fluctuations. The evaluation of the spectrum in the interaction zone indicates that the broadband low-frequency unsteadiness is predominantly two-dimensional, and can be isolated via spanwise averaging. Empirically derived transfer functions are computed using the averaged flow field, and indicate the occurrence of a feedback mechanism between downstream flow regions and shock fluctuations. The transfer functions are also used as an estimation tool to predict the shock motion accurately; for the largest streamwise separation between input and output signals, correlations above 0.6 are observed between predicted and LES data. Computation of spectral proper orthogonal decomposition (SPOD) modes confirms the existence of upstream traveling waves in the leading spectral mode. Finally, the spectral modes obtained using selected flow regions downstream of the shock enable the reconstruction of a significant portion of the energy in the interaction zone. The current results shed further light on the physical mechanisms driving the shock motion, pointing towards a causal behavior between downstream areas and the characteristic unsteady fluctuations at the approximate shock position.
△ Less
Submitted 6 December, 2020;
originally announced December 2020.
-
Structure interactions in a reduced-order model for wall-bounded turbulence
Authors:
André V. G. Cavalieri
Abstract:
New reduced-order models (ROMs) are derived for sinusoidal shear flow (also known as Waleffe flow) and plane Couette flow in small periodic domains. A first derivation for Waleffe flow exploits Fourier modes that form a natural orthonormal basis for the problem. A ROM for such basis is obtained by a Galerkin projection of the Navier-Stokes equation. A large basis was reduced to 12 modes that contr…
▽ More
New reduced-order models (ROMs) are derived for sinusoidal shear flow (also known as Waleffe flow) and plane Couette flow in small periodic domains. A first derivation for Waleffe flow exploits Fourier modes that form a natural orthonormal basis for the problem. A ROM for such basis is obtained by a Galerkin projection of the Navier-Stokes equation. A large basis was reduced to 12 modes that contribute significantly in maintaining chaotic, turbulent dynamics. A key difference from earlier ROMs is the inclusion of two roll-streak structures, with spanwise wavelengths equal to $L_z$ and $L_z/2$, where $L_z$ is the spanwise length of the computational box. The resulting system was adapted to Couette flow by rewriting the Galerkin system for the same 12 modes, modified so as to satisfy no-slip conditions on the walls. The resulting dynamical systems lead to turbulence with finite lifetimes, in agreement with earlier ROMs and simulations in small domains. However, the present models display lifetimes that are much longer than in earlier ROMs, with differences of more than an order of magnitude. The Couette-flow model is compared to results of direct numerical simulation (DNS), with statistics displaying fair agreement. The inclusion of the $L_z$ and $L_z/2$ lengthscales is seen to be a key feature for longer turbulence lifetimes: neglecting any of the roll modes, or their non-linear interaction, leads to drastic reductions of turbulence lifetimes. The present ROMs thus highlight some of the dominant nonlinear interactions that are relevant in maintaining turbulence for long lifetimes.
△ Less
Submitted 6 April, 2021; v1 submitted 17 November, 2020;
originally announced November 2020.
-
Resolvent-based estimation of turbulent channel flow using wall measurements
Authors:
Filipe R. Amaral,
André V. G. Cavalieri,
Eduardo Martini,
Peter Jordan,
Aaron Towne
Abstract:
We employ a resolvent-based methodology to estimate velocity and pressure fluctuations within turbulent channel flows at friction Reynolds numbers of approximately 180, 550 and 1000 using measurements of shear stress and pressure at the walls, taken from direct numerical simulation (DNS) databases. Martini et al. (J. Fluid Mech., vol. 900, 2021, A2) showed that the resolvent-based estimator is opt…
▽ More
We employ a resolvent-based methodology to estimate velocity and pressure fluctuations within turbulent channel flows at friction Reynolds numbers of approximately 180, 550 and 1000 using measurements of shear stress and pressure at the walls, taken from direct numerical simulation (DNS) databases. Martini et al. (J. Fluid Mech., vol. 900, 2021, A2) showed that the resolvent-based estimator is optimal when the true space-time forcing statistics are utilized, thus providing an upper bound for the accuracy of any linear estimator. We use this framework to determine the flow structures that can be linearly estimated from wall measurements, and we characterize these structures and the estimation errors in both physical and wavenumber space. We also compare these results to those obtained using approximate forcing models - an eddy-viscosity model and white-noise forcing - and demonstrate the significant benefit of using true forcing statistics. All models lead to accurate results up to the buffer-layer, but only using the true forcing statistics allows accurate estimation of large-scale log-layer structures, with significant correlation between the estimates and DNS results throughout the channel. The eddy-viscosity model displays an intermediate behaviour, which may be related to its ability to partially capture the forcing colour. Our results show that structures that leave a footprint on the channel walls can be accurately estimated using the linear resolvent-based methodology, and the presence of large-scale wall-attached structures enables accurate estimations through the logarithmic layer.
△ Less
Submitted 12 July, 2021; v1 submitted 12 November, 2020;
originally announced November 2020.
-
Closed-loop control of forced turbulent jets
Authors:
Igor A. Maia,
Peter Jordan,
André V. G. Cavalieri,
Eduardo Martini,
Flávio Silvestre
Abstract:
Closed-loop control of turbulent flows is a challenging problem with important practical and fundamental implications. We perform closed-loop control of forced, turbulent jets based on a wave-cancellation strategy. The study is motivated by the success of recent studies in applying wave cancellation to control instability waves in transitional boundary layers and free-shear flows. Using a control…
▽ More
Closed-loop control of turbulent flows is a challenging problem with important practical and fundamental implications. We perform closed-loop control of forced, turbulent jets based on a wave-cancellation strategy. The study is motivated by the success of recent studies in applying wave cancellation to control instability waves in transitional boundary layers and free-shear flows. Using a control law obtained through a system-identification technique, we successfully implement wave-cancellation-based, closed-loop control, achieving order-of-magnitude attenuations of velocity fluctuations. Control is shown to reduce fluctuation levels over an extensive streamwise range.
△ Less
Submitted 19 September, 2020;
originally announced September 2020.
-
Efficient computation of global resolvent modes
Authors:
Eduardo Martini,
Daniel Rodríguez,
Aaron Towne,
André V. G. Cavalieri
Abstract:
Resolvent analysis of the linearized Navier-Stokes equations provides useful insight into the dynamics of transitional and turbulent flows and can provide a model for the dominant coherent structures within the flow, particularly for flows with large gain separation. Direct computation of force and response modes using a singular value decomposition of the full resolvent matrix is feasible only fo…
▽ More
Resolvent analysis of the linearized Navier-Stokes equations provides useful insight into the dynamics of transitional and turbulent flows and can provide a model for the dominant coherent structures within the flow, particularly for flows with large gain separation. Direct computation of force and response modes using a singular value decomposition of the full resolvent matrix is feasible only for simple problems; despite recent progress, the cost of resolvent analysis for complex flows remains considerable. In this paper, we propose a new matrix-free method for computing resolvent modes based on integration of the linearized equations and the corresponding adjoint system in the time domain. Our approach achieves an order of magnitude speedup when compared to previous matrix-free time step** methods by enabling all frequencies of interest to be computed simultaneously. Two different methods are presented: one based on analysis of the transient response, providing leading modes with fine frequency discretization; and another based on the steady-state response to a periodic forcing, providing optimal and suboptimal modes for a discrete set of frequencies. The methods are validated using a linearized Ginzburg-Landau equation and applied to the three dimensional flow around a parabolic body.
△ Less
Submitted 25 August, 2020;
originally announced August 2020.
-
Ambiguity in mean-flow-based linear analysis
Authors:
U. Karban,
B. Bugeat,
E. Martini,
A. Towne,
A. V. G. Cavalieri,
L. Lesshafft,
A. Agarwal,
P. Jordan,
T. Colonius
Abstract:
Linearisation of the Navier-Stokes equations about the mean of a turbulent flow forms the foundation of popular models for energy amplification and coherent structures, including resolvent analysis. While the Navier-Stokes equations can be equivalently written using many different sets of dependent variables, we show that the properties of the linear operator obtained via linearisation about the m…
▽ More
Linearisation of the Navier-Stokes equations about the mean of a turbulent flow forms the foundation of popular models for energy amplification and coherent structures, including resolvent analysis. While the Navier-Stokes equations can be equivalently written using many different sets of dependent variables, we show that the properties of the linear operator obtained via linearisation about the mean depend on the variables in which the equations are written prior to linearisation. For example, we show that using primitive and conservative variables leads to differences in the singular values and modes of the resolvent operator for turbulent jets, and that the differences become more severe as variable-density effects increase. This lack of uniqueness of mean-flow-based linear analysis provides new opportunities for optimizing models by specific choice of variables while also highlighting the importance of carefully accounting for the nonlinear terms that act as a forcing on the resolvent operator.
△ Less
Submitted 27 May, 2021; v1 submitted 12 May, 2020;
originally announced May 2020.
-
The colour of forcing statistics in resolvent analyses of turbulent channel flows
Authors:
Pierluigi Morra,
Petronio A. S. Nogueira,
André V. G. Cavalieri,
Dan S. Henningson
Abstract:
The cross-spectral density (CSD) of the non-linear forcing in resolvent analyses is here quantified for the first time for turbulent channel flows. Direct numerical simulations (DNS) at $Re_τ =179$ and $Re_τ =543$ are performed. The CSDs are computed for highly energetic structures typical of buffer-layer and large-scale motions, for different temporal frequencies. The CSD of the non-linear forcin…
▽ More
The cross-spectral density (CSD) of the non-linear forcing in resolvent analyses is here quantified for the first time for turbulent channel flows. Direct numerical simulations (DNS) at $Re_τ =179$ and $Re_τ =543$ are performed. The CSDs are computed for highly energetic structures typical of buffer-layer and large-scale motions, for different temporal frequencies. The CSD of the non-linear forcing is shown not to be uncorrelated (white) in space, which implies the forcing is structured. Since the non-linear forcing is non-solenoidal by construction and the velocity of an incompressible flow is affected only by the solenoidal part of the forcing, this solenoidal part is evaluated. It is shown that the solenoidal part of the non-linear forcing is the combination of oblique streamwise vortices and a streamwise component which counteract each other, as in a destructive interference. It is shown that a rank-2 approximation of the forcing, with only the most energetic SPOD (spectral proper orthogonal decomposition) modes, leads to the bulk of the response. The projections of the non-linear forcing onto the right-singular vectors of the resolvent are evaluated. The left-singular vectors of the resolvent associated with very low-magnitude singular values are non-negligible since the non-linear forcing term has a non-negligible projection onto the linear sub-optimals of resolvent analysis. The same projections are computed when the forcing is modelled with an eddy-viscosity approach. It is clarified that this modelling improves the accuracy of the prediction since the projections are closer to those associated with the non-linear forcing from DNS data.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
Forcing statistics in resolvent analysis: application in minimal turbulent Couette flow
Authors:
Petrônio A. S. Nogueira,
Pierluigi Morra,
Eduardo Martini,
André V. G. Cavalieri,
Dan S. Henningson
Abstract:
An analysis of the statistics of the non-linear terms in resolvent analysis is performed in this work for turbulent Couette flow at low Reynolds number. Data from a direct numerical simulation of a minimal flow unit, at Reynolds number 400, is post-processed using Fourier analysis in both time and space, leading to the covariance matrix of the velocity. From the same data, we computed the non-line…
▽ More
An analysis of the statistics of the non-linear terms in resolvent analysis is performed in this work for turbulent Couette flow at low Reynolds number. Data from a direct numerical simulation of a minimal flow unit, at Reynolds number 400, is post-processed using Fourier analysis in both time and space, leading to the covariance matrix of the velocity. From the same data, we computed the non-linear terms of the Navier-Stokes equations (treated as forcing in the present formulation), which allowed us to compute the covariance matrix of the forcing for this case. The two covariances are related exactly by the resolvent operator; based on this, we explore the recovery of the velocity statistics from the statistics of the forcing as a function of the components of the forcing term. This is carried out for the dominant structures in this flow, which participate in the self-sustaining cycle of turbulence: (i) streamwise vortices and streaks, and (ii) spanwise coherent fluctuations of spanwise velocity. The present results show a dominance by four of the non-linear terms for the prediction of the full statistics of streamwise vortices and streaks; a single term is seen to be dominant for spanwise motions. A relevant feature observed in these cases is that forcing terms have significant coherence in space; moreover, different forcing components are also coherent between them. This leads to constructive and destructive interferences that greatly modify the flow response, and should thus be accounted for in modelling work.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
Lift-up, Kelvin-Helmholtz and Orr mechanisms in turbulent jets
Authors:
Ethan Pickering,
Georgios Rigas,
Petrônio A. S. Nogueira,
André V. G. Cavalieri,
Oliver T. Schmidt,
Tim Colonius
Abstract:
Three amplification mechanisms present in turbulent jets, namely lift-up, Kelvin-Helmholtz, and Orr, are characterized via global resolvent analysis and spectral proper orthogonal decomposition (SPOD) over a range of Mach numbers. The lift-up mechanism was recently identified in turbulent jets via local analysis by Nogueira et al. (J. Fluid Mech., vol. 873, 2019, pp. 211-237) at low Strouhal numbe…
▽ More
Three amplification mechanisms present in turbulent jets, namely lift-up, Kelvin-Helmholtz, and Orr, are characterized via global resolvent analysis and spectral proper orthogonal decomposition (SPOD) over a range of Mach numbers. The lift-up mechanism was recently identified in turbulent jets via local analysis by Nogueira et al. (J. Fluid Mech., vol. 873, 2019, pp. 211-237) at low Strouhal number ($St$) and non-zero azimuthal wavenumbers ($m$). In these limits, a global SPOD analysis of data from high-fidelity simulations reveals streamwise vortices and streaks similar to those found in turbulent wall-bounded flows. These structures are in qualitative agreement with the global resolvent analysis, which shows that they are a response to upstream forcing of streamwise vorticity near the nozzle exit. Analysis of mode shapes, component-wise amplitudes, and sensitivity analysis distinguishes the three mechanisms and the regions of frequency-wavenumber space where each dominates, finding lift-up to be dominant as $St/m \rightarrow 0$. Finally, SPOD and resolvent analyses of localized regions show that the lift-up mechanism is present throughout the jet, with a dominant azimuthal wavenumber inversely proportional to streamwise distance from the nozzle, with streaks of azimuthal wavenumber exceeding five near the nozzle, and wavenumbers one and two most energetic far downstream of the potential core.
△ Less
Submitted 17 July, 2020; v1 submitted 20 September, 2019;
originally announced September 2019.
-
Accurate Frequency Domain Identification of ODEs with Arbitrary Signals
Authors:
Eduardo Martini,
André V. G. Cavalieri,
Peter Jordan,
Lutz Lesshafft
Abstract:
The difficulty in frequency domain identification is that frequency components of arbitrary inputs and outputs are not related by the system's transfer function if signals are windowed. When rectangular windows are used, it is well known that this difference is related to transient effects that can be estimated alongside the systems' parameters windows. In this work, we generalize the approach for…
▽ More
The difficulty in frequency domain identification is that frequency components of arbitrary inputs and outputs are not related by the system's transfer function if signals are windowed. When rectangular windows are used, it is well known that this difference is related to transient effects that can be estimated alongside the systems' parameters windows. In this work, we generalize the approach for arbitrary windows, showing that signal windowing introduces additional terms in the system's equations. The formalism is useful for frequency-domain input-output analysis of a system, and also for system identification. For the latter application, the approach considerably reduces aliasing effects and allows the computation of the associated correction terms, reducing the number of parameters that need to be estimated. The system identification approach has features of the modulating-function technique, filtering out the effects of initial conditions while retaining the spectral interpretation of frequency-domain methods.
△ Less
Submitted 4 December, 2020; v1 submitted 9 July, 2019;
originally announced July 2019.
-
A realizable data-driven approach to delay bypass transition with control theory
Authors:
Pierluigi Morra,
Kenzo Sasaki,
Ardeshir Hanifi,
André V. G. Cavalieri,
Dan S. Henningson
Abstract:
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured…
▽ More
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured via localized wall sensors and damped via near-wall actuators resembling plasma actuators. The time-varying amplitude of the signal of each actuator is computed by processing signals from the sensors. This processing is the result of two control laws: the Linear Quadratic Gaussian regulator (LQG) and the Inverse Feed-Forward Control technique (IFFC). The use of the first, LQG, requires a state-space representation of the system dynamics, so the flow is described via an operator that captures only the most relevant information of the dynamics and results in a reduced order model (ROM). The ROM is computed via the eigensystem realization algorithm, based on the impulse responses of the real system. Collecting such impulse responses may be unfeasible when considering FST because of the high dimensionality of the input forcing needed for a precise description of such a phenomenon. Here, a new method to identify the relevant system dynamics and generate the needed impulse responses is proposed, in a data-driven approach that would be realizable in experiments. Finally, the effectiveness of the technique in delaying bypass transition is shown. The work (i) presents a systematic way to deal with high dimensional disturbances to build ROMs for a control technique, and (ii) shows that even when considering constraints such as the type and size of actuators and sensors, it is possible to achieve at least as large delay of bypass transition as that obtained in more idealized cases found in literature.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
On the role of actuation for the control of streaky structures in boundary layers
Authors:
Kenzo Sasaki,
Pierluigi Morra,
André V G. Cavalieri,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence in a zero-pressure gradient, transitional boundary layer, by means of localized sensors and actuators. A linear quadratic gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial sup…
▽ More
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence in a zero-pressure gradient, transitional boundary layer, by means of localized sensors and actuators. A linear quadratic gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial supports, corresponding to a baseline shape with only vertical forcing, and to two other shapes obtained by different optimization procedures. A computationally efficient method is derived to obtain an actuator which aims to induce the exact structures which are inside the boundary layer, given in terms of their first spectral proper orthogonal decomposition mode, and an actuator that maximizes the energy of induced downstream structures. Two free-stream turbulence levels were evaluated, corresponding to 3.0% and 3.5%, and closed-loop control is applied in large-eddy simulations of transitional boundary layers. All three actuators lead to significant delays in the transition to turbulence and were shown to be robust to mild variations in the free-stream turbulence levels. Differences are understood in terms of the SPOD of actuation and FST-induced fields along with the causality of the control scheme. The actuator optimized to generate the leading downstream SPOD mode, representing the streaks in the open-loop flow, leads to the highest transition delay, which can be understood due to its capability of closely cancelling structures in the boundary layer. However, it is shown that even with the actuator located downstream of the input measurement it may become impossible to cancel incoming disturbances in a causal way, depending on the wall-normal position of the output and on the actuator considered, which limits sensor and actuator placement capable of good closed-loop performance.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
Resolvent-based modelling of coherent wavepackets in a turbulent jet
Authors:
Lutz Lesshafft,
Onofrio Semeraro,
Vincent Jaunet,
André V. G. Cavalieri,
Peter Jordan
Abstract:
Coherent turbulent wave-packet structures in a jet at Reynolds number 460000 and Mach number 0.4 are extracted from experimental measurements and are modeled as linear fluctuations around the mean flow. The linear model is based on harmonic optimal forcing structures and their associated flow response at individual Strouhal numbers, obtained from analysis of the global linear resolvent operator. T…
▽ More
Coherent turbulent wave-packet structures in a jet at Reynolds number 460000 and Mach number 0.4 are extracted from experimental measurements and are modeled as linear fluctuations around the mean flow. The linear model is based on harmonic optimal forcing structures and their associated flow response at individual Strouhal numbers, obtained from analysis of the global linear resolvent operator. These forcing-response wave packets ("resolvent modes") are first discussed with regard to relevant physical mechanisms that provide energy gain of flow perturbations in the jet. Modal shear instability and the nonmodal Orr mechanism are identified as dominant elements, cleanly separated between the optimal and suboptimal forcing-response pairs. A theoretical development in the framework of spectral covariance dynamics then explicates the link between linear harmonic forcing-response structures and the cross-spectral density (CSD) of stochastic turbulent fluctuations. A low-rank model of the CSD at given Strouhal number is formulated from a truncated set of linear resolvent modes. Corresponding experimental CSD matrices are constructed from extensive two-point velocity measurements. Their eigenmodes (spectral proper orthogonal or SPOD modes) represent coherent wave-packet structures, and these are compared to their counterparts obtained from the linear model. Close agreement is demonstrated in the range of "preferred mode" Strouhal numbers, around a value of 0.4, between the leading coherent wave-packet structures as educed from the experiment and from the linear resolvent-based model.
△ Less
Submitted 6 June, 2019; v1 submitted 22 October, 2018;
originally announced October 2018.
-
Jet-edge interaction tones
Authors:
Peter Jordan,
Vincent Jaunet,
Aaron Towne,
André V. G. Cavalieri,
Tim Colonius,
Oliver Schmidt,
Anurag Agarwal
Abstract:
Motivated by the problem of jet-flap interaction noise, we study the tonal dynamics that occur when a sharp edge is placed in the hydrodynamic nearfield of an isothermal turbulent jet. We perform hydrodynamic and acoustic pressure measurements in order to characterise the tones as a function of Mach number and streamwise edge position. The distribution of spectral peaks observed, as a function of…
▽ More
Motivated by the problem of jet-flap interaction noise, we study the tonal dynamics that occur when a sharp edge is placed in the hydrodynamic nearfield of an isothermal turbulent jet. We perform hydrodynamic and acoustic pressure measurements in order to characterise the tones as a function of Mach number and streamwise edge position. The distribution of spectral peaks observed, as a function of Mach number, cannot be explained using the usual edge-tone scenario, in which resonance is underpinned by coupling between downstream-travelling Kelvin-Helmholtz wavepackets and upstream-travelling sound waves. We show, rather, that the strongest tones are due to coupling between the former and upstream-travelling jet modes recently studied by Towne et al. (2017) and Schmidt et al. (2017). We also study the band-limited nature of the resonance, showing a high-frequency cut-off to be due to the frequency dependence of the upstream-travelling waves. At high Mach number these become evanescent above a certain frequency, whereas at low Mach number they become progressively trapped with increasing frequency, a consequence of which is their not being reflected in the nozzle plane. Additionally, a weaker, low-frequency, forced-resonance regime is identified that involves the same upstream travelling jet modes but that couple, in this instance, with downstream-travelling sound waves. It is suggested that the existence of two resonance regimes may be due to the non-modal nature of wavepacket dynamics at low-frequency.
△ Less
Submitted 20 October, 2017;
originally announced October 2017.