-
A pH-based bio-rheostat: a proof-of-concept
Authors:
E. Alfinito,
R. Cataldo,
L. Reggiani
Abstract:
New science and new technology need new materials and new concepts. In this respect, biological matter can play a primary role because it is a material with interesting and innovative features that have found several applications in technology, from highly sensitive sensors for medical treatments to devices for energy harvesting. Furthermore, most of its phenomenology remains unclear thus giving n…
▽ More
New science and new technology need new materials and new concepts. In this respect, biological matter can play a primary role because it is a material with interesting and innovative features that have found several applications in technology, from highly sensitive sensors for medical treatments to devices for energy harvesting. Furthermore, most of its phenomenology remains unclear thus giving new hints for speculative investigations. In this letter, we explore the possibility to use a well-known photosensitive protein, the Reaction Center of Rhodobacter Sphaeroides, to build up an electrical pH sensor, i.e., a device able to change its resistance depending on the pH of the solution in which it crystalizes. By using a microscopic model successfully tested on analogue proteins, we investigate the electrical response of the Reaction Center single protein under different conditions of applied bias, showing the feasibility of the bio-rheostat hypothesis. As a matter of facts, the calculated resistance of this protein grows of about 100% when going from a pH = 10 to a pH = 6.5. Moreover, calculations of the current voltage characteristics well agree with available experiments performed with a current atomic force microscopy under neutral conditions. All findings are in qualitative agreement with the known role of pH in biochemical activities of Reaction Center and similar proteins, therefore supporting a proof-of-concept for the development of new electron devices based on biomaterials.
△ Less
Submitted 6 November, 2021; v1 submitted 17 August, 2021;
originally announced August 2021.
-
Coded masks for imaging of neutrino events
Authors:
M. Andreotti,
P. Bernardini,
A. Bersani,
S. Bertolucci,
S. Biagi,
A. Branca,
C. Brizzolari,
G. Brunetti,
I. Cagnoli,
R. Calabrese,
A. Caminata,
A. Campani,
P. Carniti,
R. Cataldo,
C. Cattadori,
S. Cherubini,
V. Cicero,
M. Citterio,
S. Copello,
P. Cova,
E. Cristaldo Morales,
S. Davini,
N. Delmonte,
G. De Matteis,
S. Di Domizio
, et al. (54 additional authors not shown)
Abstract:
The capture of scintillation light emitted by liquid Argon and Xenon under molecular excitations by charged particles is still a challenging task. Here we present a first attempt to design a device able to grab sufficiently high luminosity in order to reconstruct the path of ionizing particles. This preliminary study is based on the use of masks to encode the light signal combined with single-phot…
▽ More
The capture of scintillation light emitted by liquid Argon and Xenon under molecular excitations by charged particles is still a challenging task. Here we present a first attempt to design a device able to grab sufficiently high luminosity in order to reconstruct the path of ionizing particles. This preliminary study is based on the use of masks to encode the light signal combined with single-photon detectors. In this respect, the proposed system is able to detect tracks over focal distances of about tens of centimeters. From numerical simulations it emerges that it is possible to successfully decode and recognize signals, even complex, with a relatively limited number of acquisition channels. Such innovative technique can be very fruitful in a new generation of detectors devoted to neutrino physics and dark matter search. Indeed the introduction of coded masks combined with SiPM detectors is proposed for a liquid-Argon target in the Near Detector of the DUNE experiment.
△ Less
Submitted 21 November, 2021; v1 submitted 22 May, 2021;
originally announced May 2021.
-
CO.ME.T.A. -- covid-19 media textual analysis. A dashboard for media monitoring
Authors:
Emma Zavarrone,
Maria Gabriella Grassia,
Marina Marino,
Rasanna Cataldo,
Rocco Mazza,
Nicola Canestrari
Abstract:
The focus of this paper is to trace how mass media, particularly newspapers, have addressed the issues about the containment of contagion or the explanation of epidemiological evolution. We propose an interactive dashboard: CO.ME.T.A.. During crises it is important to shape the best communication strategies in order to respond to critical situations. In this regard, it is important to monitor the…
▽ More
The focus of this paper is to trace how mass media, particularly newspapers, have addressed the issues about the containment of contagion or the explanation of epidemiological evolution. We propose an interactive dashboard: CO.ME.T.A.. During crises it is important to shape the best communication strategies in order to respond to critical situations. In this regard, it is important to monitor the information that mass media and social platforms convey. The dashboard allows to explore the mining of contents extracted and study the lexical structure that links the main discussion topics. The dashboard merges together four methods: text mining, sentiment analysis, textual network analysis and latent topic models. Results obtained on a subset of documents show not only a health-related semantic dimension, but it also extends to social-economic dimensions.
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
New indicators for assessing the quality of in silico produced biomolecules: the case study of the aptamer-Angiopoietin-2 complex
Authors:
Rosella Cataldo,
Livia Giotta,
Maria Rachele Guascito,
Eleonora Alfinito
Abstract:
Computational procedures to foresee the 3D structure of aptamers are in continuous progress. They constitute a crucial input to research, mainly when the crystallographic counterpart of the structures in silico produced is not present. At now, many codes are able to perform structure and binding prediction, although their ability in scoring the results remains rather weak. In this paper, we propos…
▽ More
Computational procedures to foresee the 3D structure of aptamers are in continuous progress. They constitute a crucial input to research, mainly when the crystallographic counterpart of the structures in silico produced is not present. At now, many codes are able to perform structure and binding prediction, although their ability in scoring the results remains rather weak. In this paper, we propose a novel procedure to complement the ranking outcomes of free docking code, by applying it to a set of anti-angiopoietin aptamers, whose performances are known. We rank the in silico produced configurations, adopting a maximum likelihood estimate, based on their topological and electrical properties. From the analysis, two principal kinds of conformers are identified, whose ability to mimick the binding features of the natural receptor is discussed. The procedure is easily generalizable to many biological biomolecules, useful for increasing chances of success in designing high-specificity biosensors (aptasensors).
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
A validation strategy for in silico generated aptamers
Authors:
R. Cataldo,
F. Ciriaco,
E. Alfinito
Abstract:
The selection of high-affinity aptamers is of paramount interest for clinical and technological applications. A novel strategy is proposed to validate the reliability of the 3D structures of aptamers, produced in silico by using free software. The procedure consists of three steps: a. the production of a large set of conformations for each candidate aptamer, b. the rigid docking upon the receptor,…
▽ More
The selection of high-affinity aptamers is of paramount interest for clinical and technological applications. A novel strategy is proposed to validate the reliability of the 3D structures of aptamers, produced in silico by using free software. The procedure consists of three steps: a. the production of a large set of conformations for each candidate aptamer, b. the rigid docking upon the receptor, c. the topological and electrical characterization of the products. Steps a. and b. allow a global binding score of the ligand-receptor complexes based on the distribution of the "effective affinity", i.e. the sum of the conformational and the docking energy. Step c. employs a complex network approach (Proteotronics) to characterize the electrical properties of the aptamers and the ligand-receptor complexes. The test-bed is represented by a group of anti- Angiopoietin-2 aptamers. In a previous literature these aptamers were processed both in vitro and in silico, by using an approach different from that here presented, and finally tested with a SPS experiment. Computational expectations and experimental outcomes did not agree, while our results show a good agreement with the known measurements. The devised procedure is not aptamer-specific and, integrating structure production with structure selection, candidates itself as a quite complete theoretical approach for aptamer selection.
△ Less
Submitted 21 May, 2018; v1 submitted 20 November, 2017;
originally announced November 2017.
-
Hierarchy and assortativity as new tools for affinity investigation: the case of the TBA aptamer-ligand complex
Authors:
R. Cataldo,
E. Alfinito,
L. Reggiani
Abstract:
Aptamers are single stranded DNA, RNA or peptide sequences having the ability to bind a variety of specific targets (proteins, molecules as well as ions). Therefore, aptamer production and selection for therapeutic and diagnostic applications is very challenging. Usually they are in vitro generated, but, recently, computational approaches have been developed for the in silico selection, with a hig…
▽ More
Aptamers are single stranded DNA, RNA or peptide sequences having the ability to bind a variety of specific targets (proteins, molecules as well as ions). Therefore, aptamer production and selection for therapeutic and diagnostic applications is very challenging. Usually they are in vitro generated, but, recently, computational approaches have been developed for the in silico selection, with a higher affinity for the specific target. Anyway, the mechanism of aptamer-ligand formation is not completely clear, and not obvious to predict. This paper aims to develop a computational model able to describe aptamer-ligand affinity performance by using the topological structure of the corresponding graphs, assessed by means of numerical tools such as the conventional degree distribution, but also the rank-degree distribution (hierarchy) and the node assortativity. Calculations are applied to the thrombin binding aptamer (TBA), and the TBA-thrombin complex, produced in the presence of Na+ or K+. The topological analysis reveals different affinity performances between the macromolecules in the presence of the two cations, as expected by previous investigations in literature. These results nominate the graph topological analysis as a novel theoretical tool for testing affinity. Otherwise, starting from the graphs, an electrical network can be obtained by using the specific electrical properties of amino acids and nucleobases. Therefore, a further analysis concerns with the electrical response, which reveals that the resistance sensitively depends on the presence of sodium or potassium thus posing resistance as a crucial physical parameter for testing affinity.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Modeling the microscopic electrical properties of thrombin binding aptamer (TBA) for label-free biosensors
Authors:
Eleonora Alfinito,
Lino Reggiani,
Rosella Cataldo,
Giorgio De Nunzio,
Livia Giotta,
Maria Rachele Guascito
Abstract:
Aptamers are chemically produced oligonucleotides, able to bind a variety of targets such as drugs, proteins and pathogens with high sensitivity and selectivity. Therefore, aptamers are largely employed for producing label-free biosensors, with significant applications in diagnostics and drug delivery. In particular, the anti-thrombin aptamers are biomolecules of high interest for clinical use, be…
▽ More
Aptamers are chemically produced oligonucleotides, able to bind a variety of targets such as drugs, proteins and pathogens with high sensitivity and selectivity. Therefore, aptamers are largely employed for producing label-free biosensors, with significant applications in diagnostics and drug delivery. In particular, the anti-thrombin aptamers are biomolecules of high interest for clinical use, because of their ability to recognize and bind the thrombin enzyme. Among them, the DNA 15-mer thrombin-binding aptamer (TBA), has been widely explored concerning both its structure, which was resolved with different techniques, and its function, especially about the possibility of using it as the active part of biosensors. This paper proposes a microscopic model of the electrical properties of TBA and the aptamer-thrombin complex, combining information from both structure and function. The novelty consists in describing both the aptamer alone and the complex as an impedance network, thus going deeper inside the issues addressed in an emerging electronics branch known as proteotronics. The theoretical results are compared and validated with Electrochemical Impedance Spectroscopy measurements reported in the literature. Finally, the model suggests resistance measurements as a novel tool for testing aptamer-target affinity.
△ Less
Submitted 12 July, 2016;
originally announced August 2016.
