-
Impact of droplets onto surfactant-laden thin liquid films
Authors:
C. R. Constante-Amores,
L. Kahouadji,
S. Shin,
J. Chergui,
D. Juric,
J. R. Castrejon-Pita,
O. K. Matar,
A. A. Castrejon-Pita
Abstract:
We study the effect of insoluble surfactants on the impact of surfactant-free droplets on surfactant-laden thin liquid films via a fully three-dimensional direct numerical simulations approach that employs a hybrid interface-tracking/level-set method, and by taking into account surfactant-induced Marangoni stresses due to gradients in interfacial surfactant concentration. Our numerical predictions…
▽ More
We study the effect of insoluble surfactants on the impact of surfactant-free droplets on surfactant-laden thin liquid films via a fully three-dimensional direct numerical simulations approach that employs a hybrid interface-tracking/level-set method, and by taking into account surfactant-induced Marangoni stresses due to gradients in interfacial surfactant concentration. Our numerical predictions for the temporal evolution of the surfactant-free crown are validated against the experimental work by Che and Matar (2017). We focus on the crown-splash regime, and we observe that the crown dynamics evolves through various stages: from the the growth of linear modes (through a Rayleigh- Plateau instability) to the development of nonlinearities leading to primary and secondary breakup events (through droplet shedding modulated by an end-pinching mechanism). We show that the addition of surfactants does not affect the wave selection via the Rayleigh-Plateau instability. However, the presence of surfactants plays a key role in the late stages of the dynamics as soon as the ligaments are driven out from the rim. Surfactant-induced Marangoni stresses delay the end-pinching mechanisms to result in longer ligaments prior to their capillary singularity, while also promoting the spanwise merging between ligaments. Finally, we show that the addition of surfactants leads to surface rigidification and consequently to the retardation of the flow dynamics.
△ Less
Submitted 7 March, 2023; v1 submitted 23 October, 2022;
originally announced October 2022.
-
Role of surfactant-induced Marangoni stresses in retracting liquid sheets
Authors:
C. R. Constante-Amores,
J. Chergui,
S. Shin,
D. Juric,
J. R. Castrejon-Pita,
A. A. Castrejon-Pita
Abstract:
In this work, we study the effect of insoluble surfactants on the three-dimensional rim-driven retraction dynamics of thin water sheets in air. We employ an interface-tracking/level-set method to ensure the full coupling between the surfactant-induced Marangoni-stresses, interfacial diffusion, and inertia. Our findings are contrasted with the (Newtonian) dynamics of a liquid sheet edge finding tha…
▽ More
In this work, we study the effect of insoluble surfactants on the three-dimensional rim-driven retraction dynamics of thin water sheets in air. We employ an interface-tracking/level-set method to ensure the full coupling between the surfactant-induced Marangoni-stresses, interfacial diffusion, and inertia. Our findings are contrasted with the (Newtonian) dynamics of a liquid sheet edge finding that the surfactant concentration can prevent, or delay, the breakup of the rim. Our simulations use the fastest growing Rayleigh-Plateau instability to drive droplet detachment from the fluid sheet (rim). The results of this work unravel the significant role of Marangoni stresses in the retracting sheet dynamics at large elasticity numbers. We study the sensitivity of the dynamics to the elasticity number and the rigidification of the interface.
△ Less
Submitted 24 May, 2022; v1 submitted 24 February, 2022;
originally announced February 2022.
-
Surface jets and internal mixing during the coalescence of impacting and sessile droplets
Authors:
Thomas C. Sykes,
Alfonso A. Castrejón-Pita,
J. Rafael Castrejón-Pita,
David Harbottle,
Zinedine Khatir,
Harvey M. Thompson,
Mark C. T. Wilson
Abstract:
The internal dynamics during the coalescence of a sessile droplet and a subsequently deposited impacting droplet, with either identical or distinct surface tension, is studied experimentally in the regime where surface tension is dominant. Two color high-speed cameras are used to capture the rapid internal flows and associated mixing from both side and bottom views simultaneously by adding an iner…
▽ More
The internal dynamics during the coalescence of a sessile droplet and a subsequently deposited impacting droplet, with either identical or distinct surface tension, is studied experimentally in the regime where surface tension is dominant. Two color high-speed cameras are used to capture the rapid internal flows and associated mixing from both side and bottom views simultaneously by adding an inert dye to the impacting droplet. Given sufficient lateral separation between droplets of identical surface tension, a robust surface jet is identified on top of the coalesced droplet. Image processing shows this jet is the result of a surface flow caused by the impact inertia and an immobile contact line. By introducing surface tension differences between the coalescing droplets, the surface jet can be either enhanced or suppressed via a Marangoni flow. The influence of the initial droplet configuration and relative surface tension on the long-term dynamics and mixing efficiency, plus the implications for emerging applications such as reactive inkjet printing, are also considered.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
It's harder to splash on soft solids
Authors:
Christopher J. Howland,
Arnaud Antkowiak,
J. Rafael Castrejón-Pita,
Sam D. Howison,
James M. Oliver,
Robert W. Style,
Alfonso A. Castrejón-Pita
Abstract:
Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. By imaging ethanol drops impacting silicone gels of different stiffnesses we show that substrate stiffness also affects the splashing threshold. Splashing is reduced or even eliminated: droplets on the softest substrates need over 70\% more ki…
▽ More
Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. By imaging ethanol drops impacting silicone gels of different stiffnesses we show that substrate stiffness also affects the splashing threshold. Splashing is reduced or even eliminated: droplets on the softest substrates need over 70\% more kinetic energy to splash than they do on rigid substrates. We show that this is due to energy losses caused by deformations of soft substrates during the first few microseconds of impact. We find that solids with Young's moduli $\lesssim 100$kPa reduce splashing, in agreement with simple scaling arguments. Thus materials like soft gels and elastomers can be used as simple coatings for effective splash prevention. Soft substrates also serve as a useful system for testing splash-formation theories and sheet-ejection mechanisms, as they allow the characteristics of ejection sheets to be controlled independently of the bulk impact dynamics of droplets.
△ Less
Submitted 30 September, 2016; v1 submitted 19 November, 2015;
originally announced November 2015.
-
Novel designs for Penning ion traps
Authors:
J. R. Castrejon-Pita,
H. Ohadi,
D. R. Crick,
D. F. A. Winters,
D. M. Segal,
R. C. Thompson
Abstract:
We present a number of alternative designs for Penning ion traps suitable for quantum information processing (QIP) applications with atomic ions. The first trap design is a simple array of long straight wires which allows easy optical access. A prototype of this trap has been built to trap Ca+ and a simple electronic detection scheme has been employed to demonstrate the operation of the trap. An…
▽ More
We present a number of alternative designs for Penning ion traps suitable for quantum information processing (QIP) applications with atomic ions. The first trap design is a simple array of long straight wires which allows easy optical access. A prototype of this trap has been built to trap Ca+ and a simple electronic detection scheme has been employed to demonstrate the operation of the trap. Another trap design consists of a conducting plate with a hole in it situated above a continuous conducting plane. The final trap design is based on an array of pad electrodes. Although this trap design lacks the open geometry of the traps described above, the pad design may prove useful in a hybrid scheme in which information processing and qubit storage take place in different types of trap. The behaviour of the pad traps is simulated numerically and techniques for moving ions rapidly between traps are discussed. Future experiments with these various designs are discussed. All of the designs lend themselves to the construction of multiple trap arrays, as required for scalable ion trap QIP.
△ Less
Submitted 22 March, 2006;
originally announced March 2006.
-
Measurements of the bulk and interfacial velocity profiles in oscillating Newtonian and Maxwellian fluids
Authors:
M. Torralba,
J. R. Castrejon-Pita,
A. A. Castrejon-Pita,
G. Huelsz,
J. A. del Rio,
J. Ortin
Abstract:
We present the dynamic velocity profiles of a Newtonian fluid (glycerol) and a viscoelastic Maxwell fluid (CPyCl/NaSal in water) driven by an oscillating pressure gradient in a vertical cylindrical pipe. The frequency range explored has been chosen to include the first three resonance peaks of the dynamic permeability of the viscoelastic fluid / pipe system. Three different optical measurement t…
▽ More
We present the dynamic velocity profiles of a Newtonian fluid (glycerol) and a viscoelastic Maxwell fluid (CPyCl/NaSal in water) driven by an oscillating pressure gradient in a vertical cylindrical pipe. The frequency range explored has been chosen to include the first three resonance peaks of the dynamic permeability of the viscoelastic fluid / pipe system. Three different optical measurement techniques have been employed. Laser Doppler Anemometry has been used to measure the magnitude of the velocity at the centre of the liquid column. Particle Image Velocimetry and Optical Deflectometry are used to determine the velocity profiles at the bulk of the liquid column and at the liquid--air interface respectively. The velocity measurements in the bulk are in good agreement with the theoretical predictions of a linear theory. The results, however, show dramatic differences in the dynamic behaviour of Newtonian and viscoelastic fluids, and demonstrate the importance of resonance phenomena in viscoelastic fluid flows, biofluids in particular, in confined geometries.
△ Less
Submitted 10 May, 2005;
originally announced May 2005.
-
Experimental Observation of Differences in the Dynamic Response of Newtonian and Viscoelastic Fluids
Authors:
J. R. Castrejon-Pita,
J. A. del Rio,
A. A. Castrejon-Pita,
G. Huelsz
Abstract:
In this paper we present an experimental study of the dynamic responses of a Newtonian fluid and a Maxwellian fluid under an oscillating pressure gradient. We use laser Doppler anemometry in order to determine the velocity of each fluid inside a cylindrical tube. In the case of the Newtonian fluid, the dissipative nature is observed and the response obeys the Zhou and Sheng universality (PRB 39,…
▽ More
In this paper we present an experimental study of the dynamic responses of a Newtonian fluid and a Maxwellian fluid under an oscillating pressure gradient. We use laser Doppler anemometry in order to determine the velocity of each fluid inside a cylindrical tube. In the case of the Newtonian fluid, the dissipative nature is observed and the response obeys the Zhou and Sheng universality (PRB 39, 12027 (1989)). In the dynamic response of the Maxwellian fluid an enhancement at the frequencies predicted by the corresponding theory (PRE 58, 6323 (1998)) is observed.
△ Less
Submitted 18 August, 2003; v1 submitted 25 February, 2003;
originally announced February 2003.
-
Fractal dimension and self-similarity in Asparagus plumosus
Authors:
J. R. Castrejon-Pita,
A. Sarmiento Galan,
R. Castrejon-Garcia
Abstract:
We measure the fractal dimension of an African plant that is widely cultivated as ornamental, the Asparagus plumosus. This plant presents self-similarity, remarkable in at least two different scalings. In the following, we present the results obtained by analyzing this plant via the box counting method for three different scalings. We show in a quantitatively way that this species is a fractal.
We measure the fractal dimension of an African plant that is widely cultivated as ornamental, the Asparagus plumosus. This plant presents self-similarity, remarkable in at least two different scalings. In the following, we present the results obtained by analyzing this plant via the box counting method for three different scalings. We show in a quantitatively way that this species is a fractal.
△ Less
Submitted 8 October, 2002;
originally announced October 2002.
