Showing 1–14 of 14 results for author: Castrejón-Pita, A A

A new flow-based design for double-lumen needles

Authors: Radu Cimpeanu, Alfonso A. Castrejon-Pita, Lee Nai Lim, Manu Vatish, Ektoras X. Georgiou

Abstract: Oocyte retrieval forms a crucial part of in vitro fertilisation treatment and its ultimate outcome. Standard double-lumen needles, which include a sequence of aspiration and flushing steps, are characterised by a similar success rate to single-lumen needles, despite their increased cost. A novel hydrodynamics-based needle called the OxIVF needle is proposed here, which is geared towards the genera… ▽ More Oocyte retrieval forms a crucial part of in vitro fertilisation treatment and its ultimate outcome. Standard double-lumen needles, which include a sequence of aspiration and flushing steps, are characterised by a similar success rate to single-lumen needles, despite their increased cost. A novel hydrodynamics-based needle called the OxIVF needle is proposed here, which is geared towards the generation of an internal flow field within the full follicular volume via laterally, rather than frontally, oriented flushing, leading to successful retrievals with no additional stress on the oocyte. A two-dimensional digital twin of the follicular environment is created and tested via multi-phase flow direct numerical simulation. Oocyte initial location within the follicle is varied, while quantities of interest such as velocity magnitude and vorticity are measured with a high level of precision. This provides insight into the overall fluid motion, as well as the trajectory and stresses experienced by the oocyte. A comparative benchmark set of tests indicated a higher success rate of the OxIVF needle of up to 100%, marking a significant improvement over the traditional double-lumen design whose success rate of no more than 75% was also highly dependent on the location of the needle tip inside the follicle. All forces measured during these tests showcase how the oocyte experiences stresses which are no larger than at the aspiration point, with the flow field providing a gentle steering effect towards the extraction region. Finally, the flow generation strategy maximises oocyte yield, unlocking new capabilities in both human and veterinary contexts. △ Less

Submitted 5 October, 2023; v1 submitted 10 May, 2023; originally announced May 2023.

Comments: 17 pages, 6 figures

Journal ref: Journal of Biomechanics 160, 111832, 2023

Impact of droplets onto surfactant-laden thin liquid films

Authors: C. R. Constante-Amores, L. Kahouadji, S. Shin, J. Chergui, D. Juric, J. R. Castrejon-Pita, O. K. Matar, A. A. Castrejon-Pita

Abstract: We study the effect of insoluble surfactants on the impact of surfactant-free droplets on surfactant-laden thin liquid films via a fully three-dimensional direct numerical simulations approach that employs a hybrid interface-tracking/level-set method, and by taking into account surfactant-induced Marangoni stresses due to gradients in interfacial surfactant concentration. Our numerical predictions… ▽ More We study the effect of insoluble surfactants on the impact of surfactant-free droplets on surfactant-laden thin liquid films via a fully three-dimensional direct numerical simulations approach that employs a hybrid interface-tracking/level-set method, and by taking into account surfactant-induced Marangoni stresses due to gradients in interfacial surfactant concentration. Our numerical predictions for the temporal evolution of the surfactant-free crown are validated against the experimental work by Che and Matar (2017). We focus on the crown-splash regime, and we observe that the crown dynamics evolves through various stages: from the the growth of linear modes (through a Rayleigh- Plateau instability) to the development of nonlinearities leading to primary and secondary breakup events (through droplet shedding modulated by an end-pinching mechanism). We show that the addition of surfactants does not affect the wave selection via the Rayleigh-Plateau instability. However, the presence of surfactants plays a key role in the late stages of the dynamics as soon as the ligaments are driven out from the rim. Surfactant-induced Marangoni stresses delay the end-pinching mechanisms to result in longer ligaments prior to their capillary singularity, while also promoting the spanwise merging between ligaments. Finally, we show that the addition of surfactants leads to surface rigidification and consequently to the retardation of the flow dynamics. △ Less

Submitted 7 March, 2023; v1 submitted 23 October, 2022; originally announced October 2022.

Surface modulation of metal-organic frameworks for on-demand photochromism in the solid state

Authors: Samraj Mollick, Yang Zhang, Waqas Kamal, Michele Tricarico, Annika F. Möslein, Vishal Kachwal, Nader Amin, Alfonso A. Castrejón-Pita, Stephen M. Morris, **-Chong Tan

Abstract: Organic photoswitchable molecules have struggled in solid state form to fulfill their remarkable potential, in terms of photoswitching performance and long-term stability when compared to their inorganic counterparts. We report the concept of non-electron deficient host's surface with optimal porosity and hydrophobicity, as a priori strategy to design photoefficient organic solid-state photochromi… ▽ More Organic photoswitchable molecules have struggled in solid state form to fulfill their remarkable potential, in terms of photoswitching performance and long-term stability when compared to their inorganic counterparts. We report the concept of non-electron deficient host's surface with optimal porosity and hydrophobicity, as a priori strategy to design photoefficient organic solid-state photochromic materials with outstanding mechanical robustness. When exposed to a light stimulus including natural sunlight, the photoswitchable nanocomposite changes color promptly and reversibly, in a matter of seconds along with excellent photo-fatigue resistance, which are on a par with inorganic photochromes. Exemplars of commercially viable prototypes that are optically clear, comprising smart windows, complex photochromic sculptures, and self-erasing rewritable devices, were engineered by direct blending with resilient polymers; particularly, the use of high-stiffness polymer (> 2 GPa) is no longer an insurmountable challenge. Finally, photochromic films with anticounterfeiting features could be manufactured through precision inkjet printing of nanocrystals. △ Less

Submitted 1 October, 2022; originally announced October 2022.

Comments: 12 pages, 5 figures, Supplementary Information

Direct numerical simulations of turbulent jets: vortex-interface-surfactant interactions

Authors: C. R. Constante-Amores, T. Abadie, L. Kahouadji, S. Shin, J. Chergui, D. Juric, A. A. Castrejon-Pita, O. K. Matar

Abstract: We study the effect of insoluble surfactants on the spatio-temporal evolution of turbulent jets. We use three-dimensional numerical simulations and employ an interface-tracking/level-set method that accounts for surfactant-induced Marangoni stresses. The present study builds on our previous work (Constante et al., 2021, J. Fluid Mech., 922, A6) in which we examined in detail the vortex-surface int… ▽ More We study the effect of insoluble surfactants on the spatio-temporal evolution of turbulent jets. We use three-dimensional numerical simulations and employ an interface-tracking/level-set method that accounts for surfactant-induced Marangoni stresses. The present study builds on our previous work (Constante et al., 2021, J. Fluid Mech., 922, A6) in which we examined in detail the vortex-surface interaction in the absence of surfactants. Numerical solutions are obtained for a wide range of Weber and elasticity numbers in which vorticity production is generated by surface deformation and surfactant-induced Marangoni stresses. The present work demonstrates, for the first time, the crucial role of Marangoni stresses, brought about by surfactant concentration gradients, in the formation of coherent, hairpin-like vortex structures. These structures have a profound influence on the development of the three-dimensional interfacial dynamics. We also present theoretical expressions for the mechanisms that influence the rate of production of circulation in the presence of surfactants for a general, three-dimensional, two-phase flow and highlight the dominant contribution of Marangoni stresses. △ Less

Submitted 17 October, 2022; v1 submitted 12 July, 2022; originally announced July 2022.

Role of surfactant-induced Marangoni stresses in retracting liquid sheets

Authors: C. R. Constante-Amores, J. Chergui, S. Shin, D. Juric, J. R. Castrejon-Pita, A. A. Castrejon-Pita

Abstract: In this work, we study the effect of insoluble surfactants on the three-dimensional rim-driven retraction dynamics of thin water sheets in air. We employ an interface-tracking/level-set method to ensure the full coupling between the surfactant-induced Marangoni-stresses, interfacial diffusion, and inertia. Our findings are contrasted with the (Newtonian) dynamics of a liquid sheet edge finding tha… ▽ More In this work, we study the effect of insoluble surfactants on the three-dimensional rim-driven retraction dynamics of thin water sheets in air. We employ an interface-tracking/level-set method to ensure the full coupling between the surfactant-induced Marangoni-stresses, interfacial diffusion, and inertia. Our findings are contrasted with the (Newtonian) dynamics of a liquid sheet edge finding that the surfactant concentration can prevent, or delay, the breakup of the rim. Our simulations use the fastest growing Rayleigh-Plateau instability to drive droplet detachment from the fluid sheet (rim). The results of this work unravel the significant role of Marangoni stresses in the retracting sheet dynamics at large elasticity numbers. We study the sensitivity of the dynamics to the elasticity number and the rigidification of the interface. △ Less

Submitted 24 May, 2022; v1 submitted 24 February, 2022; originally announced February 2022.

Nano-Trap Engineering in MOF Microenvironment for Ultratrace Iodine Sensors

Authors: Arun S. Babal, Samraj Mollick, Waqas Kamal, Steve Elston, Alfonso A. Castrejón-Pita, Stephen M. Morris, **-Chong Tan

Abstract: Ultra-sensitive and highly selective iodine gas sensors play a crucial role during the nuclear radiation leak for a timely detection and mitigation of pollution, ensuring the safety of a vast number of operators and subsequent integrity of the facility. Herein, we rationally designed a metal-organic framework (MOF) that exhibits an outstanding performance with an almost billion-fold enhancement in… ▽ More Ultra-sensitive and highly selective iodine gas sensors play a crucial role during the nuclear radiation leak for a timely detection and mitigation of pollution, ensuring the safety of a vast number of operators and subsequent integrity of the facility. Herein, we rationally designed a metal-organic framework (MOF) that exhibits an outstanding performance with an almost billion-fold enhancement in the electrical response due to its optimized hydrophobicity, which allows the easy migration of iodine molecules though the channels and the presence of suitable interaction sites, temporarily anchoring the target molecule for ultra-trace sensing. The prototype sensor tested in demanding environments demonstrates its high selectivity, ultra-trace parts per billion (ppb)-level sensitivity, good reversibility, and a very fast response time even at high frequencies compared to existing adsorbents, including commercially available materials. Further, the iodine sensing at the atomic level was studied in detail by measuring the electrical response of a single crystal and, the optimal thickness of the MOF layer was identified for an industrially-viable prototype sensor by using inkjet printing. In a wider perspective, we propose a general strategy towards electrically efficient sensing materials with hybrid functionalities for engineering high-sensitivity iodine sensors for a safe and sustainable future. △ Less

Submitted 17 February, 2022; originally announced February 2022.

Comments: 14 Pages, 5 Figures, 1 Supporting Information (32 pages)

Electrophoretic Molecular Communication with Time-Varying Electric Fields

Authors: Sunghwan Cho, Thomas C. Sykes, Justin P. Coon, Alfonso A. Castrejón-Pita

Abstract: This article investigates a novel electrophoretic molecular communication mechanism that utilizes a time-varying electric field, which induces time-varying molecule velocities and in turn improves communication performance. For a sinusoidal field, we specify favorable signal parameters (e.g., phase and frequency) that yield excellent communication link performance. We also analytically derive an o… ▽ More This article investigates a novel electrophoretic molecular communication mechanism that utilizes a time-varying electric field, which induces time-varying molecule velocities and in turn improves communication performance. For a sinusoidal field, we specify favorable signal parameters (e.g., phase and frequency) that yield excellent communication link performance. We also analytically derive an optimized field function by formulating an appropriate cost function and solving the Euler-Lagrange equation. In our setup, the field strength is proportional to the molecular velocity; we verify this assumption by solving the Basset-Boussinesq-Oseen equation for a given time-varying electric field (forcing function) and examining its implications for practical physical parameterizations of the system. Our analysis and Monte-Carlo simulation results demonstrate that the proposed time-varying approach can significantly increase the number of information-carrying molecules expected to be observed at the receiver and reduce the bit-error probability compared to the constant field benchmark. △ Less

Submitted 18 March, 2021; originally announced March 2021.

Comments: 19 pages, 6 figures

Journal ref: Nano Commun. Networks 31, 100381 (2022)

Surface jets and internal mixing during the coalescence of impacting and sessile droplets

Authors: Thomas C. Sykes, Alfonso A. Castrejón-Pita, J. Rafael Castrejón-Pita, David Harbottle, Zinedine Khatir, Harvey M. Thompson, Mark C. T. Wilson

Abstract: The internal dynamics during the coalescence of a sessile droplet and a subsequently deposited impacting droplet, with either identical or distinct surface tension, is studied experimentally in the regime where surface tension is dominant. Two color high-speed cameras are used to capture the rapid internal flows and associated mixing from both side and bottom views simultaneously by adding an iner… ▽ More The internal dynamics during the coalescence of a sessile droplet and a subsequently deposited impacting droplet, with either identical or distinct surface tension, is studied experimentally in the regime where surface tension is dominant. Two color high-speed cameras are used to capture the rapid internal flows and associated mixing from both side and bottom views simultaneously by adding an inert dye to the impacting droplet. Given sufficient lateral separation between droplets of identical surface tension, a robust surface jet is identified on top of the coalesced droplet. Image processing shows this jet is the result of a surface flow caused by the impact inertia and an immobile contact line. By introducing surface tension differences between the coalescing droplets, the surface jet can be either enhanced or suppressed via a Marangoni flow. The influence of the initial droplet configuration and relative surface tension on the long-term dynamics and mixing efficiency, plus the implications for emerging applications such as reactive inkjet printing, are also considered. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Comments: 18 pages, 9 figures

Journal ref: Phys. Rev. Fluids 5, 023602 (2020)

Dynamics of wrinkling in ultrathin elastic sheets

Authors: Finn Box, Doireann O'Kiely, Ousmane Kodio, Maxime Inizan, Alfonso A. Castrejon-Pita, Dominic Vella

Abstract: The wrinkling of thin elastic objects provides a means of generating regular patterning at small scales in applications ranging from photovoltaics to microfluidic devices. Static wrinkle patterns are known to be governed by an energetic balance between the object's bending stiffness and an effective substrate stiffness, which may originate from a true substrate stiffness or from tension and curvat… ▽ More The wrinkling of thin elastic objects provides a means of generating regular patterning at small scales in applications ranging from photovoltaics to microfluidic devices. Static wrinkle patterns are known to be governed by an energetic balance between the object's bending stiffness and an effective substrate stiffness, which may originate from a true substrate stiffness or from tension and curvature along the wrinkles. Here we investigate dynamic wrinkling, induced by the impact of a solid sphere onto an ultra-thin polymer sheet floating on water. The vertical deflection of the sheet's centre induced by impact draws material radially inwards, resulting in an azimuthal compression that is relieved by the wrinkling of the entire sheet. We show that this wrinkling is truly dynamic, exhibiting features that are qualitatively different to those seen in quasi-static wrinkling experiments. Moreover, we show that the wrinkles coarsen dynamically because of the inhibiting effect of the fluid inertia. This dynamic coarsening can be understood heuristically as the result of a dynamic stiffness, which dominates the static stiffnesses reported thus far, and allows new controls of wrinkle wavelength. △ Less

Submitted 27 January, 2020; v1 submitted 28 September, 2018; originally announced October 2018.

Comments: 8 pages, 4 figures. Please see published version for supplementary movies and SI Appendix

Journal ref: Proc. Natl Acad. Sci. USA 116, 20875-20880 (2019)

An adaptive solver for viscoelastic incompressible two-phase problems applied to the study of the splashing of slightly viscoelastic droplets

Authors: J. M. Lopez-Herrera, S. Popinet, A. A. Castrejon-Pita

Abstract: We propose an adaptive numerical solver for the study of viscoelastic 2D two-phase flows using the volume-of-fluid method. The scheme uses the robust log conformation tensor technique of Fattal & Kupferman (2004,2005} combined with the time-split scheme proposed by Hao & Pan (2007}. The use of this time-split scheme has been proven to increase the stability of the numerical computation of two-phas… ▽ More We propose an adaptive numerical solver for the study of viscoelastic 2D two-phase flows using the volume-of-fluid method. The scheme uses the robust log conformation tensor technique of Fattal & Kupferman (2004,2005} combined with the time-split scheme proposed by Hao & Pan (2007}. The use of this time-split scheme has been proven to increase the stability of the numerical computation of two-phase flows. We show that the adaptive computational technique can be used to simulate viscoelastic flows efficiently. The solver is coded using the open-source libraries provided by the \basilisk \cite{Basilisk} platform. In particular, the method is implemented for Oldroyd-B type viscoelastic fluids and related models (FENE-P and FENE-CR). The numerical scheme is then used to study the splashing of weakly viscoelastic drops. The solvers and tests of this work are freely available on the Basilisk web site △ Less

Submitted 29 June, 2018; originally announced July 2018.

It's harder to splash on soft solids

Authors: Christopher J. Howland, Arnaud Antkowiak, J. Rafael Castrejón-Pita, Sam D. Howison, James M. Oliver, Robert W. Style, Alfonso A. Castrejón-Pita

Abstract: Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. By imaging ethanol drops impacting silicone gels of different stiffnesses we show that substrate stiffness also affects the splashing threshold. Splashing is reduced or even eliminated: droplets on the softest substrates need over 70\% more ki… ▽ More Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. By imaging ethanol drops impacting silicone gels of different stiffnesses we show that substrate stiffness also affects the splashing threshold. Splashing is reduced or even eliminated: droplets on the softest substrates need over 70\% more kinetic energy to splash than they do on rigid substrates. We show that this is due to energy losses caused by deformations of soft substrates during the first few microseconds of impact. We find that solids with Young's moduli $\lesssim 100$kPa reduce splashing, in agreement with simple scaling arguments. Thus materials like soft gels and elastomers can be used as simple coatings for effective splash prevention. Soft substrates also serve as a useful system for testing splash-formation theories and sheet-ejection mechanisms, as they allow the characteristics of ejection sheets to be controlled independently of the bulk impact dynamics of droplets. △ Less

Submitted 30 September, 2016; v1 submitted 19 November, 2015; originally announced November 2015.

Comments: 5 pages, 4 figures

Heat to electricity thermoacoustic-magnetohydrodynamic conversion

Authors: A. A. Castrejon-Pita, G. Huelsz

Abstract: In this work, a new concept for the conversion of heat into electricity is presented. The conversion is based on the combined effects of a thermoacoustic prime mover coupled with a magnetohydrodynamic generator, using different working fluids in each process. The results of preliminary experiments are also presented. In this work, a new concept for the conversion of heat into electricity is presented. The conversion is based on the combined effects of a thermoacoustic prime mover coupled with a magnetohydrodynamic generator, using different working fluids in each process. The results of preliminary experiments are also presented. △ Less

Submitted 11 October, 2006; originally announced October 2006.

Comments: Short article, 5 figures, 5 pages

Measurements of the bulk and interfacial velocity profiles in oscillating Newtonian and Maxwellian fluids

Authors: M. Torralba, J. R. Castrejon-Pita, A. A. Castrejon-Pita, G. Huelsz, J. A. del Rio, J. Ortin

Abstract: We present the dynamic velocity profiles of a Newtonian fluid (glycerol) and a viscoelastic Maxwell fluid (CPyCl/NaSal in water) driven by an oscillating pressure gradient in a vertical cylindrical pipe. The frequency range explored has been chosen to include the first three resonance peaks of the dynamic permeability of the viscoelastic fluid / pipe system. Three different optical measurement t… ▽ More We present the dynamic velocity profiles of a Newtonian fluid (glycerol) and a viscoelastic Maxwell fluid (CPyCl/NaSal in water) driven by an oscillating pressure gradient in a vertical cylindrical pipe. The frequency range explored has been chosen to include the first three resonance peaks of the dynamic permeability of the viscoelastic fluid / pipe system. Three different optical measurement techniques have been employed. Laser Doppler Anemometry has been used to measure the magnitude of the velocity at the centre of the liquid column. Particle Image Velocimetry and Optical Deflectometry are used to determine the velocity profiles at the bulk of the liquid column and at the liquid--air interface respectively. The velocity measurements in the bulk are in good agreement with the theoretical predictions of a linear theory. The results, however, show dramatic differences in the dynamic behaviour of Newtonian and viscoelastic fluids, and demonstrate the importance of resonance phenomena in viscoelastic fluid flows, biofluids in particular, in confined geometries. △ Less

Submitted 10 May, 2005; originally announced May 2005.

Comments: Paper to be published in Physical Review E, other related papers in http://www.cie.unam.mx/~arp

Journal ref: Physical Review E 72, 016308 (2005).

Experimental Observation of Differences in the Dynamic Response of Newtonian and Viscoelastic Fluids

Authors: J. R. Castrejon-Pita, J. A. del Rio, A. A. Castrejon-Pita, G. Huelsz

Abstract: In this paper we present an experimental study of the dynamic responses of a Newtonian fluid and a Maxwellian fluid under an oscillating pressure gradient. We use laser Doppler anemometry in order to determine the velocity of each fluid inside a cylindrical tube. In the case of the Newtonian fluid, the dissipative nature is observed and the response obeys the Zhou and Sheng universality (PRB 39,… ▽ More In this paper we present an experimental study of the dynamic responses of a Newtonian fluid and a Maxwellian fluid under an oscillating pressure gradient. We use laser Doppler anemometry in order to determine the velocity of each fluid inside a cylindrical tube. In the case of the Newtonian fluid, the dissipative nature is observed and the response obeys the Zhou and Sheng universality (PRB 39, 12027 (1989)). In the dynamic response of the Maxwellian fluid an enhancement at the frequencies predicted by the corresponding theory (PRE 58, 6323 (1998)) is observed. △ Less

Submitted 18 August, 2003; v1 submitted 25 February, 2003; originally announced February 2003.

Comments: 5 pages, 4 Figures, paper to be published in Phys. Rev. E

Journal ref: Phys. Rev. E 68, 046301 (2003).