-
Applying Energy Absorption Interferometry to THz direct detectors using photomixers
Authors:
Ian Veenendaal,
Edgar Castillo-Dominguez,
Stephen J. C. Yates,
Bram Lap,
Willem Jellema
Abstract:
Detector requirements for far infrared astronomy generally result in devices which exhibit a few-moded response to incident radiation. The sensitivity and spatial form of the individual modes to which such a detector is sensitive can be determined with knowledge of the complex valued cross-spectral density of the system, which we label the detector response function (DRF). A matrix representing th…
▽ More
Detector requirements for far infrared astronomy generally result in devices which exhibit a few-moded response to incident radiation. The sensitivity and spatial form of the individual modes to which such a detector is sensitive can be determined with knowledge of the complex valued cross-spectral density of the system, which we label the detector response function (DRF). A matrix representing the discretized cross-spectral density can be measured from the complex amplitudes of interference fringes generated by two identical sources as they are independently scanned through the field of view. We provide experimental verification of this technique using monochromatic THz beams generated by photomixers in which the relative phase is varied with fiber stretchers. We use this system to characterize the modal response of a single pixel from an array of microwave kinetic inductance detectors (MKIDs).
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Calibration strategy for the SPICA/SAFARI instrument
Authors:
Russell F. Shipman,
Bart Vandenbussche,
Edgar Castillo-Dominguez,
Alvaro Labiano,
Willem Jellema,
Angiola Orlando
Abstract:
SPICA is a mid to far infra-red space mission to explore the processes that form galaxies, stars and planets. SPICA/SAFARI is the far infrared spectrometer that provides near-background limited observations between 34 and 230 micrometers. The core of SAFARI consists of 4 grating modules, dispersing light onto 5 arrays of TES detectors per module. The grating modules provide low resolution (250) in…
▽ More
SPICA is a mid to far infra-red space mission to explore the processes that form galaxies, stars and planets. SPICA/SAFARI is the far infrared spectrometer that provides near-background limited observations between 34 and 230 micrometers. The core of SAFARI consists of 4 grating modules, dispersing light onto 5 arrays of TES detectors per module. The grating modules provide low resolution (250) instantaneous spectra over the entire wavelength range. The high resolution (1500 to 12000) mode is accomplished by placing a Fourier Transform Spectrometer (FTS) in front of the gratings. Each grating module detector sees an interferogram from which the high resolution spectrum can be constructed. SAFARI data will be a convolution of complex spectral, temporal and spatial information. Along with spectral calibration accuracy of <1%, a relative flux calibration of 1% and an absolute flux calibration accuracy of 10% are required. This paper will discuss the calibration strategy and its impact on the instrument design of SAFARI
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
MUSCAT focal plane verification
Authors:
M. Tapia,
P. A. R. Ade,
P. S. Barry,
T. L. R. Brien,
E. Castillo-Domínguez,
D. Ferrusca,
V. Gómez-Rivera,
P. Hargrave,
J. L. Hernández Rebollar,
A. Hornsby,
D. H. Hughes,
J. M. Jáuregui-García,
P. Mauskopf,
D. Murias,
A. Papageorgiou,
E. Pascale,
A. Pérez,
S. Rowe,
M. W. L. Smith,
C. Tucker,
M. Velázquez,
S. Ventura,
S. Doyle
Abstract:
The Mexico-UK Submillimetre Camera for Astronomy (MUSCAT) is the second-generation large-format continuum camera operating in the 1.1 mm band to be installed on the 50-m diameter Large Millimeter Telescope (LMT) in Mexico. The focal plane of the instrument is made up of 1458 horn coupled lumped-element kinetic inductance detectors (LEKID) divided equally into six channels deposited on three silico…
▽ More
The Mexico-UK Submillimetre Camera for Astronomy (MUSCAT) is the second-generation large-format continuum camera operating in the 1.1 mm band to be installed on the 50-m diameter Large Millimeter Telescope (LMT) in Mexico. The focal plane of the instrument is made up of 1458 horn coupled lumped-element kinetic inductance detectors (LEKID) divided equally into six channels deposited on three silicon wafers. Here we present the preliminary results of the complete characterisation in the laboratory of the MUSCAT focal plane. Through the instrument's readout system, we perform frequency sweeps of the array to identify the resonance frequencies, and continuous timestream acquisitions to measure and characterise the intrinsic noise and 1/f knee of the detectors. Subsequently, with a re-imaging lens and a black body point source, the beams of every detector are mapped, obtaining a mean FWHM size of $\sim$3.27 mm, close to the expected 3.1 mm. Then, by varying the intensity of a beam filling black body source, we measure the responsivity and noise power spectral density (PSD) for each detector under an optical load of 300 K, obtaining the noise equivalent power (NEP), with which we verify that the majority of the detectors are photon noise limited. Finally, using a Fourier Transform Spectrometer (FTS), we measure the spectral response of the instrument, which indicate a bandwidth of 1.0--1.2 mm centred on 1.1 mm, as expected.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Pre-deployment Verification and Predicted Map** Speed of MUSCAT
Authors:
T. L. R. Brien,
P. A. R. Ade,
P. S. Barry,
E. Castillo-Domínguez,
D. Ferrusca,
V. Gómez-Rivera,
P. Hargrave,
J. L. Hernández Rebollar,
A. Hornsby,
D. H. Hughes,
J. M. Jáuregui-García,
P. Mauskopf,
D. Murias,
A. Papageorgiou,
E. Pascale,
A. Pérez,
S. Rowe,
M. W. L. Smith,
M. Tapia,
C. Tucker,
M. Velázquez,
S. Ventura,
S. Doyle
Abstract:
The Mexico-UK Submillimetre Camera for AsTronomy (MUSCAT) is a 1.1 mm receiver consisting of 1,500 lumped-element kinetic inductance detectors (LEKIDs) for the Large Millimeter Telescope (LMT; Volcán Sierra Negra in Puebla, México). MUSCAT utilises the maximum field of view of the LMT's upgraded 50-metre primary mirror and is the first México-UK collaboration to deploy a millimetre/sub-mm receiver…
▽ More
The Mexico-UK Submillimetre Camera for AsTronomy (MUSCAT) is a 1.1 mm receiver consisting of 1,500 lumped-element kinetic inductance detectors (LEKIDs) for the Large Millimeter Telescope (LMT; Volcán Sierra Negra in Puebla, México). MUSCAT utilises the maximum field of view of the LMT's upgraded 50-metre primary mirror and is the first México-UK collaboration to deploy a millimetre/sub-mm receiver on the Large Millimeter Telescope. Using a simplistic simulator, we estimate a predicted map** speed for MUSCAT by combining the measured performance of MUSCAT with the observed sky conditions at the LMT. We compare this to a previously calculated bolometric-model map** speed and find that our map** speed is in good agreement when this is scaled by a previously reported empirical factor. Through this simulation we show that signal contamination due to sky fluctuations can be effectively removed through the use of principle component analysis. We also give an overview of the instrument design and explain how this design allows for MUSCAT to be upgraded and act as an on-sky demonstration testbed for novel technologies after the facility-class TolTEC receiver comes online.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
MUSCAT: The Mexico-UK Sub-Millimetre Camera for AsTronomy
Authors:
Thomas L. R. Brien,
Peter A. R. Ade,
Peter S. Barry,
Edgar Castillo-Domìnguez,
Daniel Ferrusca,
Thomas Gascard,
Victor Gómez,
Peter C. Hargrave,
Amber L. Hornsby,
David Hughes,
Enzo Pascale,
Josie D. A. Parrianen,
Abel Perez,
Sam Rowe,
Carole Tucker,
Salvador Ventura González,
Simon M. Doyle
Abstract:
The Mexico-UK Sub-millimetre Camera for AsTronomy (MUSCAT) is a large-format, millimetre-wave camera consisting of 1,500 background-limited lumped-element kinetic inductance detectors (LEKIDs) scheduled for deployment on the Large Millimeter Telescope (Volcán Sierra Negra, Mexico) in 2018. MUSCAT is designed for observing at 1.1 mm and will utilise the full 40' field of view of the LMTs upgraded 5…
▽ More
The Mexico-UK Sub-millimetre Camera for AsTronomy (MUSCAT) is a large-format, millimetre-wave camera consisting of 1,500 background-limited lumped-element kinetic inductance detectors (LEKIDs) scheduled for deployment on the Large Millimeter Telescope (Volcán Sierra Negra, Mexico) in 2018. MUSCAT is designed for observing at 1.1 mm and will utilise the full 40' field of view of the LMTs upgraded 50-m primary mirror. In its primary role, MUSCAT is designed for high-resolution follow-up surveys of both galactic and extra-galactic sub-mm sources identified by Herschel. MUSCAT is also designed to be a technology demonstrator that will provide the first on-sky demonstrations of novel design concepts such as horn-coupled LEKID arrays and closed continuous cycle miniature dilution refrigeration.
Here we describe some of the key design elements of the MUSCAT instrument such as the novel use of continuous sorption refrigerators and a miniature dilutor for continuous 100-mK cooling of the focal plane, broadband optical coupling to Aluminium LEKID arrays using waveguide chokes and anti-reflection coating materials as well as with the general mechanical and optical design of MUSCAT. We explain how MUSCAT is designed to be simple to upgrade and the possibilities for changing the focal plane unit that allows MUSCAT to act as a demonstrator for other novel technologies such as multi-chroic polarisation sensitive pixels and on-chip spectrometry in the future. Finally, we will report on the current status of MUSCAT's commissioning.
△ Less
Submitted 23 July, 2018;
originally announced July 2018.
-
Mexico-UK Sub-millimeter Camera for AsTronomy
Authors:
Edgar Castillo-Dominguez,
Peter Ade,
Peter Barry,
Thom Brien,
Simon Doyle,
Daniel Ferrusca,
Victor Gomez-Rivera,
Peter Hargrave,
Amber Hornsby,
David Hughes,
Phillip Mauskopf,
Paul Moseley,
Enzo Pascale,
Abel Perez-Fajardo,
Giampaolo Pisano,
Samuel Rowe,
Carole Tucker,
Miguel Velazquez
Abstract:
MUSCAT is a large format mm-wave camera scheduled for installation on the Large Millimeter Telescope Alfonso Serrano (LMT) in 2018. The MUSCAT focal plane is based on an array of horn coupled lumped-element kinetic inductance detectors optimised for coupling to the 1.1mm atmospheric window. The detectors are fed with fully baffled reflective optics to minimize stray-light contamination. This combi…
▽ More
MUSCAT is a large format mm-wave camera scheduled for installation on the Large Millimeter Telescope Alfonso Serrano (LMT) in 2018. The MUSCAT focal plane is based on an array of horn coupled lumped-element kinetic inductance detectors optimised for coupling to the 1.1mm atmospheric window. The detectors are fed with fully baffled reflective optics to minimize stray-light contamination. This combination will enable background-limited performance at 1.1 mm across the full 4 arcminute field-of-view of the LMT. The easily accessible focal plane will be cooled to 100 mK with a new closed cycle miniature dilution refrigerator that permits fully continuous operation. The MUSCAT instrument will demonstrate the science capabilities of the LMT through two relatively short science programmes to provide high resolution follow-up surveys of Galactic and extra-galactic sources previously observed with the Herschel space observatory, after the initial observing campaigns. In this paper, we will provide an overview of the overall instrument design as well as an update on progress and scheduled installation on the LMT.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
A Continuous 100-mK Helium-Light Cooling System for MUSCAT on the LMT
Authors:
T. L. R. Brien,
E. Castillo-Dominguez,
S. Chase,
S. M. Doyle
Abstract:
The MUSCAT instrument is a large-format camera planned for installation on the Large Millimeter Telescope (LMT) in 2018. MUSCAT requires continuous cooling of several large-volume stages to sub-Kelvin temperatures, with the focal plane cooled to 100 mK. Through the use of continuous sorption coolers and a miniature dilution refrigerator, the MUSCAT project can fulfil its cryogenic requirements at…
▽ More
The MUSCAT instrument is a large-format camera planned for installation on the Large Millimeter Telescope (LMT) in 2018. MUSCAT requires continuous cooling of several large-volume stages to sub-Kelvin temperatures, with the focal plane cooled to 100 mK. Through the use of continuous sorption coolers and a miniature dilution refrigerator, the MUSCAT project can fulfil its cryogenic requirements at a fraction of the cost and space required for conventional dilution systems. Our design is a helium-light system, using a total of only 9 litres of helium-3 across several continuous cooling systems, cooling from 4 K to 100 mK. Here we describe the operation of both the continuous sorption and the miniature dilution refrigerator systems used in this system, along with the overall thermal design and budgeting of MUSCAT. MUSCAT will represent the first deployment of these new technologies in a science-grade instrument and will prove the concept as a viable option for future large-scale experiments such as CMB-S4.
△ Less
Submitted 23 July, 2018; v1 submitted 23 January, 2018;
originally announced January 2018.