Showing 1–50 of 118 results for author: Castillo, R

Skip** a beat: discovery of persistent quasi-periodic oscillations associated with pulsed fraction drop of the spin signal in M51 ULX-7

Authors: Matteo Imbrogno, Sara Elisa Motta, Roberta Amato, Gian Luca Israel, Guillermo Andres Rodríguez Castillo, Murray Brightman, Piergiorgio Casella, Matteo Bachetti, Felix Fürst, Luigi Stella, Ciro Pinto, Fabio Pintore, Francesco Tombesi, Andrés Gúrpide, Matthew J. Middleton, Chiara Salvaggio, Andrea Tiengo, Andrea Belfiore, Andrea De Luca, Paolo Esposito, Anna Wolter, Hannah P. Earnshaw, Dominic J. Walton, Timothy P. Roberts, Luca Zampieri , et al. (2 additional authors not shown)

Abstract: The discovery of pulsations in (at least) six ultraluminous X-ray sources (ULXs) has shown that neutron stars can accrete at (highly) super-Eddington rates, challenging the standard accretion theories. M51 ULX-7, with a spin signal of $P\simeq2.8$ s, is the pulsating ULX (PULX) with the shortest known orbital period ($P_\mathrm{orb}\simeq2$ d) and has been observed multiple times by XMM-Newton, Ch… ▽ More The discovery of pulsations in (at least) six ultraluminous X-ray sources (ULXs) has shown that neutron stars can accrete at (highly) super-Eddington rates, challenging the standard accretion theories. M51 ULX-7, with a spin signal of $P\simeq2.8$ s, is the pulsating ULX (PULX) with the shortest known orbital period ($P_\mathrm{orb}\simeq2$ d) and has been observed multiple times by XMM-Newton, Chandra, and NuSTAR. We report on the timing and spectral analyses of three XMM-Newton observations of M51 ULX-7 performed between the end of 2021 and the beginning of 2022, together with a timing re-analysis of XMM-Newton, Chandra, and NuSTAR archival observations. We investigated the spin signal by applying accelerated search techniques and studied the power spectrum through the fast Fourier transform, looking for (a)periodic variability in the source flux. We analysed the energy spectra of the 2021-2022 observations and compared them to the older ones. We report the discovery of a recurrent, significant ($>$3$σ$) broad complex at mHz frequencies in the power spectra of M51 ULX-7. We did not detect the spin signal, setting a 3$σ$ upper limit on the pulsed fraction of $\lesssim10\%$ for the single observation. The complex is significantly detected also in five Chandra observations performed in 2012. M51 ULX-7 represents the second PULX for which we have a significant detection of mHz-QPOs at super-Eddington luminosities. These findings suggest that one should avoid using the observed QPO frequency to infer the mass of the accretor in a ULX. The absence of spin pulsations when the broad complex is detected suggests that the mechanism responsible for the aperiodic modulation also dampens the spin signal's pulsed fraction. If true, this represents an additional obstacle in the detection of new PULXs, suggesting an even larger occurrence of PULXs among ULXs. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Comments: 14 pages (12 main text + Appendix), 5 figures. Accepted for publication on A&A

Pron vs Prompt: Can Large Language Models already Challenge a World-Class Fiction Author at Creative Text Writing?

Authors: Guillermo Marco, Julio Gonzalo, Ramón del Castillo, María Teresa Mateo Girona

Abstract: It has become routine to report research results where Large Language Models (LLMs) outperform average humans in a wide range of language-related tasks, and creative text writing is no exception. It seems natural, then, to raise the bid: Are LLMs ready to compete in creative writing skills with a top (rather than average) novelist? To provide an initial answer for this question, we have carried ou… ▽ More It has become routine to report research results where Large Language Models (LLMs) outperform average humans in a wide range of language-related tasks, and creative text writing is no exception. It seems natural, then, to raise the bid: Are LLMs ready to compete in creative writing skills with a top (rather than average) novelist? To provide an initial answer for this question, we have carried out a contest between Patricio Pron (an awarded novelist, considered one of the best of his generation) and GPT-4 (one of the top performing LLMs), in the spirit of AI-human duels such as DeepBlue vs Kasparov and AlphaGo vs Lee Sidol. We asked Pron and GPT-4 to provide thirty titles each, and then to write short stories for both their titles and their opponent's. Then, we prepared an evaluation rubric inspired by Boden's definition of creativity, and we collected 5,400 manual assessments provided by literature critics and scholars. The results of our experimentation indicate that LLMs are still far from challenging a top human creative writer, and that reaching such level of autonomous creative writing skills probably cannot be reached simply with larger language models. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: 9 pages 6 figures

The restless population of bright X-ray sources of NCG 3621

Authors: A. Sacchi, M. Imbrogno, S. E. Motta, P. Esposito, G. L. Israel, N. O. Pinciroli Vago, A. De Luca, M. Marelli, F. Pintore, G. A. Rodríguez Castillo, R. Salvaterra, A. Tiengo

Abstract: We report on the multi-year evolution of the population of X-ray sources in the nuclear region of NGC 3621 based on Chandra, XMM-Newton and Swift observations. Among these, two sources, X1 and X5, after their first detection in 2008, seem to have faded below the detectability threshold, a most interesting fact as X1 is associated with the AGN of the galaxy. Two other sources, X3 and X6 are present… ▽ More We report on the multi-year evolution of the population of X-ray sources in the nuclear region of NGC 3621 based on Chandra, XMM-Newton and Swift observations. Among these, two sources, X1 and X5, after their first detection in 2008, seem to have faded below the detectability threshold, a most interesting fact as X1 is associated with the AGN of the galaxy. Two other sources, X3 and X6 are presented for the first time, the former showing a peculiar short-term variability in the latest available dataset, suggesting an egress from eclipse, hence belonging to the handful of known eclipsing ultra-luminous X-ray sources. One source, X4, previously known for its "heart-beat", i.e. a characteristic modulation in its signal with a period of $\approx1$ h, shows a steady behaviour in the latest observation. Finally, the brightest X-ray source in NGC 3621, here labelled X2, shows steady levels of flux across all the available datasets but a change in its spectral shape, reminiscent of the behaviours of Galactic disk-fed X-ray binaries. △ Less

Submitted 28 June, 2024; originally announced July 2024.

Comments: 11 pages, 10 figures, 3 tables, 2 appendices available online. Accepted for publication on A&A

Scintillation Light in SBND: Simulation, Reconstruction, and Expected Performance of the Photon Detection System

Authors: SBND Collaboration, P. Abratenko, R. Acciarri, C. Adams, L. Aliaga-Soplin, O. Alterkait, R. Alvarez-Garrote, C. Andreopoulos, A. Antonakis, L. Arellano, J. Asaadi, W. Badgett, S. Balasubramanian, V. Basque, A. Beever, B. Behera, E. Belchior, M. Betancourt, A. Bhat, M. Bishai, A. Blake, B. Bogart, J. Bogenschuetz, D. Brailsford, A. Brandt , et al. (158 additional authors not shown)

Abstract: SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its… ▽ More SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its design is a dual readout concept combining a system of 120 photomultiplier tubes, used for triggering, with a system of 192 X-ARAPUCA devices, located behind the anode wire planes. Furthermore, covering the cathode plane with highly-reflective panels coated with a wavelength-shifting compound recovers part of the light emitted towards the cathode, where no optical detectors exist. We show how this new design provides a high light yield and a more uniform detection efficiency, an excellent timing resolution and an independent 3D-position reconstruction using only the scintillation light. Finally, the whole reconstruction chain is applied to recover the temporal structure of the beam spill, which is resolved with a resolution on the order of nanoseconds. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: 21 pages, 17 figures

Report number: FERMILAB-PUB-24-0303-PPD

The Orbit of NGC 5907 ULX-1

Authors: Andrea Belfiore, Ruben Salvaterra, Lara Sidoli, Gian Luca Israel, Luigi Stella, Andrea De Luca, Sandro Mereghetti, Paolo Esposito, Fabio Pintore, Antonino D'Aì, Guillermo Rodrìguez Castillo, Dominic J. Walton, Felix Fürst, Danilo Magistrali, Anna Wolter, Matteo Imbrogno

Abstract: We report on the orbit of the binary system powering the most extreme ultraluminous X-ray pulsar known to date: NGC 5907 ULX-1 (hereafter ULX1). ULX1 has been the target of a substantial multi-instrument campaign, mainly in the X-ray band, but no clear counterparts are known in other bands. Although ULX1 is highly variable and pulsations can be transient (regardless of the source flux), the timing… ▽ More We report on the orbit of the binary system powering the most extreme ultraluminous X-ray pulsar known to date: NGC 5907 ULX-1 (hereafter ULX1). ULX1 has been the target of a substantial multi-instrument campaign, mainly in the X-ray band, but no clear counterparts are known in other bands. Although ULX1 is highly variable and pulsations can be transient (regardless of the source flux), the timing data collected so far allow us to investigate the orbit of this system. We find an orbital period $P_{orb}=5.7^{+0.1}_{-0.6}\text{ d}$ and a projected semi-axis $A_1 =3.1^{+0.8}_{-0.9}\text{ lts}$. The most likely ephemeris is: $P_{orb}=5.6585(6)\text{ d}$, $A_1 = 3.1(4)\text{ lts}$, and the epoch of ascending nodes passage is: $T_{asc} = 57751.37(5)\text{ MJD}$. However, there are 6 similar solutions, acceptable within $3\,σ$. We find further indications that ULX1 is a high-mass X-ray binary. This implies that we are observing its orbit face-on, with an inclination $<5\text{ deg}$. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comments: 11 pages, 2 tables, 6 figures

Journal ref: ApJ 965, 78B (2024)

Challenges of Quantum Software Engineering for the Next Decade: The Road Ahead

Authors: Juan M. Murillo, Jose Garcia-Alonso, Enrique Moguel, Johanna Barzen, Frank Leymann, Shaukat Ali, Tao Yue, Paolo Arcaini, Ricardo Pérez Castillo, Ignacio García Rodríguez de Guzmán, Mario Piattini, Antonio Ruiz-Cortés, Antonio Brogi, Jianjun Zhao, Andriy Miranskyy, Manuel Wimmer

Abstract: As quantum computers evolve, so does the complexity of the software that they can run. To make this software efficient, maintainable, reusable, and cost-effective, quality attributes that any industry-grade software should strive for, mature software engineering approaches should be applied during its design, development, and operation. Due to the significant differences between classical and quan… ▽ More As quantum computers evolve, so does the complexity of the software that they can run. To make this software efficient, maintainable, reusable, and cost-effective, quality attributes that any industry-grade software should strive for, mature software engineering approaches should be applied during its design, development, and operation. Due to the significant differences between classical and quantum software, applying classical software engineering solutions to quantum software is difficult. This resulted in the birth of Quantum Software Engineering as a discipline in the contemporary software engineering landscape. In this work, a set of active researchers is currently addressing the challenges of Quantum Software Engineering and analyzing the most recent research advances in this domain. This analysis is used to identify needed breakthroughs and future research directions for Quantum Software Engineering. △ Less

Submitted 10 April, 2024; originally announced April 2024.

The properties of FR0 radio galaxies as intermediate objects in the evolution of radio galaxies

Authors: David Garofalo, Chandra B. Singh, Eddie Harmon, Michael Williams, Luis Rojas Castillo

Abstract: The counter-rotation between black holes and accretion disk configuration was introduced over a decade ago to elucidate the nature of the radio loud/radio-quiet dichotomy and the jet-disk connection, but has since been applied to a plethora of observations across space and time. We briefly review the paradigm in which counter-rotation is key for the triggering of radio galaxies and its observation… ▽ More The counter-rotation between black holes and accretion disk configuration was introduced over a decade ago to elucidate the nature of the radio loud/radio-quiet dichotomy and the jet-disk connection, but has since been applied to a plethora of observations across space and time. We briefly review the paradigm in which counter-rotation is key for the triggering of radio galaxies and its observational support, then apply it to a series of observations concerning FR0 radio galaxies. FR0 radio galaxies appear to be radio galaxies in transition, with low-spinning black holes and thus weaker but tilted jets with respect to an earlier radio quasar phase. As a result, FR0 radio galaxies are prescribed to be in an earlier phase of star formation suppression in radio galaxies, compared to a later phase that is unlikely to be less than tens of millions of years in the future if they have enough accretion fuel to evolve into more powerful FRI radio galaxies. FR0 radio galaxies will have a greater or lesser star formation suppression feedback effect depending on how long they live. Tilted jets also enhance stellar velocities in the bulge. Because FR0 jet lengths are of the same order of magnitude as the radius of the stellar bulge, FR0 jets are prescribed to have begun, more or less recently depending on their age, to affect stellar velocity dispersions as well. As a result, they will be associated with dispersion values that tend to be larger than for characteristically non-jetted active galaxies, but smaller than giant radio galaxies such as M87 that have experienced a long-term tilted and more powerful FRI jet. With these ideas it is possible to make a coarse-grained prediction for the slope of the M-σ plane for FR0 radio galaxies with values between 4 and 8. △ Less

Submitted 21 March, 2024; originally announced March 2024.

Comments: 13 pages, 4 Figures, Accepted for publication in the Journal of High Energy Astrophysics

Acoustic tactile sensing for mobile robot wheels

Authors: Wilfred Mason, David Brenken, Falcon Z. Dai, Ricardo Gonzalo Cruz Castillo, Olivier St-Martin Cormier, Audrey Sedal

Abstract: Tactile sensing in mobile robots remains under-explored, mainly due to challenges related to sensor integration and the complexities of distributed sensing. In this work, we present a tactile sensing architecture for mobile robots based on wheel-mounted acoustic waveguides. Our sensor architecture enables tactile sensing along the entire circumference of a wheel with a single active component: an… ▽ More Tactile sensing in mobile robots remains under-explored, mainly due to challenges related to sensor integration and the complexities of distributed sensing. In this work, we present a tactile sensing architecture for mobile robots based on wheel-mounted acoustic waveguides. Our sensor architecture enables tactile sensing along the entire circumference of a wheel with a single active component: an off-the-shelf acoustic rangefinder. We present findings showing that our sensor, mounted on the wheel of a mobile robot, is capable of discriminating between different terrains, detecting and classifying obstacles with different geometries, and performing collision detection via contact localization. We also present a comparison between our sensor and sensors traditionally used in mobile robots, and point to the potential for sensor fusion approaches that leverage the unique capabilities of our tactile sensing architecture. Our findings demonstrate that autonomous mobile robots can further leverage our sensor architecture for diverse map** tasks requiring knowledge of terrain material, surface topology, and underlying structure. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: 12 pages, 12 figures

On super curves and supervolumes

Authors: Ricardo Jesús Ramos Castillo

Abstract: We study the geometry of super curves with a chosen supervolume form. We consider the algebra of divergence free vector fields $S(1|N)$ associated to such curves. When $N=2$ its derived algebra, called $S(2)$, defines a special family of curves, named $S(2)$-super curves. We exhibit an involution on the moduli space of such curves that generalizes Deligne's involution for $N=1$ super curves. The f… ▽ More We study the geometry of super curves with a chosen supervolume form. We consider the algebra of divergence free vector fields $S(1|N)$ associated to such curves. When $N=2$ its derived algebra, called $S(2)$, defines a special family of curves, named $S(2)$-super curves. We exhibit an involution on the moduli space of such curves that generalizes Deligne's involution for $N=1$ super curves. The fixed point set of this involution consists on Manin's $SUSY_2$-super curves. We describe the moduli spaces of these curves. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Comments: 37 pages

One-loop evolution of twist-2 generalized parton distributions

Authors: Valerio Bertone, Rafael F. del Castillo, Miguel G. Echevarria, Óscar del Río, Simone Rodini

Abstract: We revisit the evolution of generalised parton distributions (GPDs) at the leading order in the strong coupling constant $α_s$ for all of the twist-2 quark and gluon operators. We rederive the relevant one-loop evolution kernels, expressing them in a form suitable for implementation, and check analytically that some basic properties, such as DGLAP/ERBL limits and polynomiality conservation, are fu… ▽ More We revisit the evolution of generalised parton distributions (GPDs) at the leading order in the strong coupling constant $α_s$ for all of the twist-2 quark and gluon operators. We rederive the relevant one-loop evolution kernels, expressing them in a form suitable for implementation, and check analytically that some basic properties, such as DGLAP/ERBL limits and polynomiality conservation, are fulfilled. We also present a number of numerical results obtained with a public implementation of the evolution in the library {\tt APFEL++} and available within the {\tt PARTONS} framework. △ Less

Submitted 15 February, 2024; v1 submitted 23 November, 2023; originally announced November 2023.

Comments: Updated list of references

Report number: DESY-23-188, IPARCOS-UCM-23-128

The long-term impact of (un)conditional cash transfers on labour market outcomes in Ecuador

Authors: Juan Ponce, José-Ignacio Antón, Mercedes Onofa, Roberto Castillo

Abstract: Despite the popularity of conditional cash transfers in low- and middle-income countries, evidence on their long-term effects remains scarce. This paper assesses the impact of the Ecuador's Human Development Grant on the formal sector labour market outcomes of children in eligible households. This grant -- one of the first of its kind -- is characterised by weak enforcement of its eligibility crit… ▽ More Despite the popularity of conditional cash transfers in low- and middle-income countries, evidence on their long-term effects remains scarce. This paper assesses the impact of the Ecuador's Human Development Grant on the formal sector labour market outcomes of children in eligible households. This grant -- one of the first of its kind -- is characterised by weak enforcement of its eligibility criteria. By means of a regression discontinuity design, we find that this programme increased formal employment rates and labour income around a decade after exposure, thereby curbing the intergenerational transmission of poverty. We discuss possible mediating mechanisms based on findings from previous literature and, in particular, provide evidence on how the programme contributed to persistence in school in the medium run. △ Less

Submitted 29 September, 2023; originally announced September 2023.

$p$-Laplacian operator with potential in generalized Morrey Spaces

Authors: René Erlin Castillo, Héctor Camilo Chaparro

Abstract: We study some basic properties of generalized Morrey spaces $\mathcal{M}^{p,φ}(\R^{d})$. Also, the problem $-\mbox{div}(|\nabla u|^{p-2}\nabla u)+V|u|^{p-2}u=0$ in $Ω$, where $Ω$ is a bounded open set in $\R^d$, and potential $V$ is assumed to be not equivalent to zero and lies in $\mathcal{M}^{p,φ}(Ω)$, is studied. Finally, we establish the strong unique continuation for the $p$-Laplace operator… ▽ More We study some basic properties of generalized Morrey spaces $\mathcal{M}^{p,φ}(\R^{d})$. Also, the problem $-\mbox{div}(|\nabla u|^{p-2}\nabla u)+V|u|^{p-2}u=0$ in $Ω$, where $Ω$ is a bounded open set in $\R^d$, and potential $V$ is assumed to be not equivalent to zero and lies in $\mathcal{M}^{p,φ}(Ω)$, is studied. Finally, we establish the strong unique continuation for the $p$-Laplace operator in the case $V\in\mathcal{M}^{p,φ}(\R^d)$. △ Less

Submitted 8 August, 2023; originally announced August 2023.

MSC Class: 35J05; 46E30; 26D10

Transverse Momentum Measurements with Jets at Next-to-Leading Power

Authors: Rafael F. del Castillo, Max Jaarsma, Ignazio Scimemi, Wouter Waalewijn

Abstract: In view of the increasing precision of theoretical calculations and experimental measurements, power corrections to transverse-momentum-dependent observables are highly important. We study the next-to-leading power corrections for transverse momentum measurements in $e^+ e^- \rightarrow 2$ jets. We obtain a factorized expression for the cross section, which involve twist-2 and twist-3 operators, a… ▽ More In view of the increasing precision of theoretical calculations and experimental measurements, power corrections to transverse-momentum-dependent observables are highly important. We study the next-to-leading power corrections for transverse momentum measurements in $e^+ e^- \rightarrow 2$ jets. We obtain a factorized expression for the cross section, which involve twist-2 and twist-3 operators, and identify the new jet functions that appear in it. We calculate these jet functions at order αs for a family of recoil-free schemes, and provide the corresponding anomalous dimensions at leading order. Additionally, we show that the (endpoint) divergences that typically arise in sub-leading-power factorization can be subtracted and cancel for our case. By working with jets, everything is perturbatively calculable and there are substantial simplifications compared to the general next-to-leading power framework. Importantly, our analysis with jets can be extended to semi-inclusive deep-inelastic scattering, with the future Electron-Ion Collider as key application. △ Less

Submitted 5 February, 2024; v1 submitted 24 July, 2023; originally announced July 2023.

Comments: 30 pages, 4 figures, v3: journal version

Discovery of a magnetar candidate X-ray pulsar in the Large Magellanic Cloud

Authors: M. Imbrogno, G. L. Israel, G. A. Rodríguez Castillo, D. A. H. Buckley, F. Coti Zelati, N. Rea, I. M. Monageng, P. Casella, L. Stella, F. Haberl, P. Esposito, F. Tombesi, A. De Luca, A. Tiengo

Abstract: During a systematic search for new X-ray pulsators in the XMM-Newton archive, we discovered a high amplitude ($PF\simeq86\%$) periodic ($P\simeq7.25\,\mathrm{s}$) modulation in the X-ray flux of 4XMM J045626.3-694723 (J0456 hereafter), a previously unclassified source in the Large Magellanic Cloud (LMC). The period of the modulation is strongly suggestive of a spinning neutron star (NS). The sourc… ▽ More During a systematic search for new X-ray pulsators in the XMM-Newton archive, we discovered a high amplitude ($PF\simeq86\%$) periodic ($P\simeq7.25\,\mathrm{s}$) modulation in the X-ray flux of 4XMM J045626.3-694723 (J0456 hereafter), a previously unclassified source in the Large Magellanic Cloud (LMC). The period of the modulation is strongly suggestive of a spinning neutron star (NS). The source was detected only during one out of six observations in 2018-2022. Based on an absorbed power-law spectral model with photon slope of $Γ\simeq 1.9$, we derive a 0.3-10 keV luminosity of $L_\mathrm{X}\simeq2.7\times10^{34}$ erg cm$^{-2}$ s$^{-1}$ for a distance of 50 kpc. The X-ray properties of J0456 are at variance with those of variable LMC X-ray pulsars hosted in high-mass X-ray binary systems with a Be-star companion. Based on SALT spectroscopic observations of the only optical object that matches the X-ray uncertainty region, we cannot completely rule out that J0456 is a NS accreting from a late-type (G8-K3) star, an as-yet-unobserved binary evolutionary outcome in the MCs. We show that the source properties are in better agreement with those of magnetars. J0456 may thus be second known magnetar in the LMC after SGR 0526-66. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: 9 pages, 6 figures, 1 table. Accepted for publication in MNRAS

Experimental observation of metallic states with different dimensionality in a quasi-1D charge density wave compound

Authors: P. Rezende-Gonçalves, M. Thees, J. Rojas Castillo, D. Silvera-Vega, R. L. Bouwmeester, E. David, A. Antezak, A. J. Thakur, F. Fortuna, P. Le Fèvre, M. Rosmus, N. Olszowska, R. Magalhães-Paniago, A. C. Garcia-Castro, P. Giraldo-Gallo, E. Frantzeskakis, A. F. Santander-Syro

Abstract: TaTe$_4$ is a quasi-1D tetrachalcogenide that exhibits a CDW instability caused by a periodic lattice distortion. Recently, pressure-induced superconductivity has been achieved in this compound, revealing a competition between these different ground states and making TaTe$_4$ very interesting for fundamental studies. Although TaTe$_4$ exhibits CDW ordering below 475 K, transport experiments have r… ▽ More TaTe$_4$ is a quasi-1D tetrachalcogenide that exhibits a CDW instability caused by a periodic lattice distortion. Recently, pressure-induced superconductivity has been achieved in this compound, revealing a competition between these different ground states and making TaTe$_4$ very interesting for fundamental studies. Although TaTe$_4$ exhibits CDW ordering below 475 K, transport experiments have reported metallic behavior with a resistivity plateau at temperatures lower than 10 K. In this paper, we study the electronic structure of TaTe$_4$ using a combination of high-resolution angle-resolved photoemission spectroscopy and density functional calculations. Our results reveal the existence of the long-sought metallic states. These states exhibit mixed dimensionality, while some of them might have potential topological properties. △ Less

Submitted 28 April, 2023; originally announced May 2023.

Comments: 8 pages, 4 figures

SAILOR: Perceptual Anchoring For Robotic Cognitive Architectures

Authors: Miguel Á. González-Santamarta, Francisco J. Rodríguez-Lera, Vicente Matellán Olivera, Virginia Riego Del Castillo, Lidia Sánchez-González

Abstract: Symbolic anchoring is a crucial problem in the field of robotics, as it enables robots to obtain symbolic knowledge from the perceptual information acquired through their sensors. In cognitive-based robots, this process of processing sub-symbolic data from real-world sensors to obtain symbolic knowledge is still an open problem. To address this issue, this paper presents SAILOR, a framework for pr… ▽ More Symbolic anchoring is a crucial problem in the field of robotics, as it enables robots to obtain symbolic knowledge from the perceptual information acquired through their sensors. In cognitive-based robots, this process of processing sub-symbolic data from real-world sensors to obtain symbolic knowledge is still an open problem. To address this issue, this paper presents SAILOR, a framework for providing symbolic anchoring in the ROS 2 ecosystem. SAILOR aims to maintain the link between symbolic data and perceptual data in real robots over time, increasing the intelligent behavior of robots. It provides a semantic world modeling approach using two deep learning-based sub-symbolic robotic skills: object recognition and matching function. The object recognition skill allows the robot to recognize and identify objects in its environment, while the matching function enables the robot to decide if new perceptual data corresponds to existing symbolic data. This paper provides a description of the proposed method and the development of the framework, as well as its integration in MERLIN2 (a hybrid cognitive architecture fully functional in robots running ROS 2). △ Less

Submitted 8 February, 2024; v1 submitted 14 March, 2023; originally announced March 2023.

Comments: 16 pages, 5 figures, 7 tables, 3 algorithms, Submitted to Scientific Reports

Probing the nature of the low state in the extreme ultraluminous X-ray pulsar NGC 5907 ULX1

Authors: F. Fuerst, D. J. Walton, G. L. Israel, M. Bachetti, D. Barret, M. Brightman, H. P. Earnshaw, A. Fabian, M. Heida, M. Imbrogno, M. J. Middleton, C. Pinto, R. Salvaterra, T. P. Roberts, G. A. Rodríguez Castillo, N. Webb

Abstract: NGC 5907 ULX1 is the most luminous ultra-luminous X-ray pulsar (ULXP) known to date, reaching luminosities in excess of 1e41 erg/s. The pulsar is known for its fast spin-up during the on-state. Here, we present a long-term monitoring of the X-ray flux and the pulse period between 2003-2022. We find that the source was in an off- or low-state between mid-2017 to mid-2020. During this state, our pul… ▽ More NGC 5907 ULX1 is the most luminous ultra-luminous X-ray pulsar (ULXP) known to date, reaching luminosities in excess of 1e41 erg/s. The pulsar is known for its fast spin-up during the on-state. Here, we present a long-term monitoring of the X-ray flux and the pulse period between 2003-2022. We find that the source was in an off- or low-state between mid-2017 to mid-2020. During this state, our pulse period monitoring shows that the source had spun down considerably. We interpret this spin-down as likely being due to the propeller effect, whereby accretion onto the neutron star surface is inhibited. Using state-of-the-art accretion and torque models, we use the spin-up and spin-down episodes to constrain the magnetic field. For the spin-up episode, we find solutions for magnetic field strengths of either around 1e12G or 1e13G, however, the strong spin-down during the off-state seems only to be consistent with a very high magnetic field, namely, >1e13G. This is the first time a strong spin-down is seen during a low flux state in a ULXP. Based on the assumption that the source entered the propeller regime, this gives us the best estimate so far for the magnetic field of NGC 5907 ULX1. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Comments: 10 pages, 1 figure, accepted for publication in A&A

Journal ref: A&A 672, A140 (2023)

Deep X-ray and radio observations of the first outburst of the young magnetar Swift J1818.0-1607

Authors: A. Y. Ibrahim, A. Borghese, N. Rea, F. Coti Zelati, E. Parent, T. D. Russell, S. Ascenzi, R. Sathyaprakash, D. Gotz, S. Mereghetti, M. Topinka, M. Rigoselli, V. Savchenko, S. Campana, G. L. Israel, A. Tiengo, R. Perna, R. Turolla, S. Zane, P. Esposito, G. A. Rodrıguez Castillo, V. Graber, A. Possenti, C. Dehman, M. Ronchi , et al. (1 additional authors not shown)

Abstract: Swift J1818.0-1607 is a radio-loud magnetar with a spin period of 1.36 s and a dipolar magnetic field strength of B~3E14 G, which is very young compared to the Galactic pulsar population. We report here on the long-term X-ray monitoring campaign of this young magnetar using XMM-Newton, NuSTAR, and Swift from the activation of its first outburst in March 2020 until October 2021, as well as INTEGRAL… ▽ More Swift J1818.0-1607 is a radio-loud magnetar with a spin period of 1.36 s and a dipolar magnetic field strength of B~3E14 G, which is very young compared to the Galactic pulsar population. We report here on the long-term X-ray monitoring campaign of this young magnetar using XMM-Newton, NuSTAR, and Swift from the activation of its first outburst in March 2020 until October 2021, as well as INTEGRAL upper limits on its hard X-ray emission. The 1-10 keV magnetar spectrum is well modeled by an absorbed blackbody with a temperature of kT_BB~1.1 keV, and apparent reduction in the radius of the emitting region from ~0.6 to ~0.2 km. We also confirm the bright diffuse X-ray emission around the source extending between ~50'' and ~110''. A timing analysis revealed large torque variability, with an average spin-down rate nudot~-2.3E-11 Hz^2 that appears to decrease in magnitude over time. We also observed Swift J1818.0-1607 with the Karl G. Jansky Very Large Array (VLA) on 2021 March 22. We detected the radio counterpart to Swift J1818.0-1607 measuring a flux density of S_v = 4.38+/-0.05 mJy at 3 GHz, and a half ring-like structure of bright diffuse radio emission located at ~90'' to the west of the magnetar. We tentatively suggest that the diffuse X-ray emission is due to a dust scattering halo and that the radio structure may be associated with the supernova remnant of this young pulsar, based on its morphology. △ Less

Submitted 22 November, 2022; originally announced November 2022.

Comments: 19 pages, 8 figures, accepted for publication on ApJ

Out-of-Things Debugging: A Live Debugging Approach for Internet of Things

Authors: Carlos Rojas Castillo, Matteo Marra, Jim Bauwens, Elisa Gonzalez Boix

Abstract: Context: Internet of Things (IoT) has become an important kind of distributed systems thanks to the wide-spread of cheap embedded devices equipped with different networking technologies. Although ubiquitous, develo** IoT systems remains challenging. Inquiry: A recent field study with 194 IoT developers identifies debugging as one of the main challenges faced when develo** IoT systems. This c… ▽ More Context: Internet of Things (IoT) has become an important kind of distributed systems thanks to the wide-spread of cheap embedded devices equipped with different networking technologies. Although ubiquitous, develo** IoT systems remains challenging. Inquiry: A recent field study with 194 IoT developers identifies debugging as one of the main challenges faced when develo** IoT systems. This comes from the lack of debugging tools taking into account the unique properties of IoT systems such as non-deterministic data, and hardware restricted devices. On the one hand, offline debuggers allow developers to analyse post-failure recorded program information, but impose too much overhead on the devices while generating such information. Furthermore, the analysis process is also time-consuming and might miss contextual information relevant to find the root cause of bugs. On the other hand, online debuggers do allow debugging a program upon a failure while providing contextual information (e.g., stack trace). In particular, remote online debuggers enable debugging of devices without physical access to them. However, they experience debugging interference due to network delays which complicates bug reproducibility, and have limited support for dynamic software updates on remote devices. Approach: This paper proposes out-of-things debugging, an online debugging approach especially designed for IoT systems. The debugger is always-on as it ensures constant availability to for instance debug post-deployment situations. Upon a failure or breakpoint, out-of-things debugging moves the state of a deployed application to the developer's machine. Developers can then debug the application locally by applying operations (e.g., step commands) to the retrieved state. Once debugging is finished, developers can commit bug fixes to the device through live update capabilities. Finally, by means of a fine-grained flexible interface for accessing remote resources, developers have full control over the debugging overhead imposed on the device, and the access to device hardware resources (e.g., sensors) needed during local debugging. Knowledge: Out-of-things debugging maintains good properties of remote debugging as it does not require physical access to the device to debug it, while reducing debugging interference since there are no network delays on operations (e.g., step**) issued on the debugger since those happen locally. Furthermore, device resources are only accessed when requested by the user which further mitigates overhead and opens avenues for mocking or simulation of non-accessed resources. Grounding: We implemented an out-of-things debugger as an extension to a WebAssembly Virtual Machine and benchmarked its suitability for IoT. In particular, we compared our solution to remote debugging alternatives based on metrics such as network overhead, memory usage, scalability, and usability in production settings. From the benchmarks, we conclude that our debugger exhibits competitive performance in addition to confining overhead without sacrificing debugging convenience and flexibility. Importance: Out-of-things debugging enables debugging of IoT systems by means of classical online operations (e.g., stepwise execution) while addressing IoT-specific concerns (e.g., hardware limitations). We show that having the debugger always-on does not have to come at cost of performance loss or increased overhead but instead can enforce a smooth-going and flexible debugging experience of IoT systems. △ Less

Submitted 3 November, 2022; originally announced November 2022.

Journal ref: The Art, Science, and Engineering of Programming, 2023, Vol. 7, Issue 2, Article 5

Global solution for a coupled parabolic system with degenerate coefficients and time-weighted sources

Authors: Ricardo Castillo, Omar Guzmán-Rea, Miguel Loayza, María Zegarra

Abstract: In this paper, we obtain the so-called Fujita exponent to the following parabolic system with time-weighted sources and degenerate coefficients $ u_{t}- \mbox{div} ( ω(x)\nabla { u} )= t^{r} v^{p} $ and $ v_{t}- \mbox{div} ( ω(x)\nabla {v} )= t^{s} u^{p}$ in $\mathbb{R}^{N} \times (0,T)$ with initial data belonging to $ \left[L^\infty(\mathbb{R}^N)\right]^2.$ Where $p,q > 0$ with $ pq > 1$;… ▽ More In this paper, we obtain the so-called Fujita exponent to the following parabolic system with time-weighted sources and degenerate coefficients $ u_{t}- \mbox{div} ( ω(x)\nabla { u} )= t^{r} v^{p} $ and $ v_{t}- \mbox{div} ( ω(x)\nabla {v} )= t^{s} u^{p}$ in $\mathbb{R}^{N} \times (0,T)$ with initial data belonging to $ \left[L^\infty(\mathbb{R}^N)\right]^2.$ Where $p,q > 0$ with $ pq > 1$; $r,s>-1 $; and either $ω(x) = | x_1|^{a},$ or $ω(x) = | x |^{b}$ with $a,b > 0$. △ Less

Submitted 11 September, 2022; originally announced September 2022.

MSC Class: 35K05; 35A01; 35K58; 35K65; 35B33

on a second critical value for the local existence of solutions in lebesgue spaces

Authors: Brandon Carhuas-Torre, Ricardo Castillo, Miguel Loayza

Abstract: We provide new conditions for the local existence of solutions to the time-weighted parabolic equation $ u_t - Δu = h(t)f(u) \mbox{ in } Ω\times (0,T),$ where $ Ω$ is a arbitrary smooth domain, $f\in C(\mathbb{R})$, $h\in C([0,\infty))$ and $u(0)\in L^r(Ω)$. As consequence of our results, considering a suitable behavior of the non-negative initial data, we obtain a second critical value… ▽ More We provide new conditions for the local existence of solutions to the time-weighted parabolic equation $ u_t - Δu = h(t)f(u) \mbox{ in } Ω\times (0,T),$ where $ Ω$ is a arbitrary smooth domain, $f\in C(\mathbb{R})$, $h\in C([0,\infty))$ and $u(0)\in L^r(Ω)$. As consequence of our results, considering a suitable behavior of the non-negative initial data, we obtain a second critical value $ρ^\star = 2r/(p-1),$ when $f(u)=u^p$ and $p> 1 + 2r/N$, which determines the existence (or not) of a local solution $u \in L^\infty((0,T), L^r(Ω)).$ △ Less

Submitted 20 July, 2022; originally announced July 2022.

Dynamic State Estimation for Load Bus Protection on Inverter-Interfaced Microgrids

Authors: Arthur K. Barnes, Adam Mate, Jean Marie V. Bikorimana, Ricardo J. Castillo

Abstract: Inverter-interfaced microgrids results in challenges when designing protection systems. Traditional time-overcurrent, admittance, and differential protection methods are unsuitable on account of lack of fault current, excessively short lines, or a prohibitive number of protective devices needing to be installed. Current practice is to force all inverters to shut down during fault conditions, weake… ▽ More Inverter-interfaced microgrids results in challenges when designing protection systems. Traditional time-overcurrent, admittance, and differential protection methods are unsuitable on account of lack of fault current, excessively short lines, or a prohibitive number of protective devices needing to be installed. Current practice is to force all inverters to shut down during fault conditions, weakening resilience and reducing reliability. Dynamic state estimation (DSE), which has been explored for both line protection and load bus protection before, is a potential solution to these challenges to create widely utilizable, highly reliable protection systems. However, it has only been tested for load protection with ideal voltage sources, which do not capture the short-circuit behavior of inverter-interfaced generation, notably low fault current and unbalanced output voltage. This paper aims to extend the state-of-the-art on DSE load protection: the performance of DSE during short-circuit conditions with a grid-forming inverter with current-limiting behavior during fault conditions is investigated. △ Less

Submitted 8 October, 2022; v1 submitted 13 July, 2022; originally announced July 2022.

Comments: 5 pages. 3 figures. 1 tables

Report number: LA-UR-22-22686

Journal ref: Proceedings of the 2022 IEEE PES/IAS PowerAfrica Conference, pp. 1-5, Aug. 2022

Existence and non-existence of global solutions for a heat equation with degenerate coefficients

Authors: Ricardo Castillo, Omar Guzmán-Rea, María Zegarra

Abstract: In this paper, we will study the following parabolic problem $u_t - div(ω(x) \nabla u)= h(t) f(u) + l(t) g(u)$ with non-negative initial conditions pertaining to $C_b(\mathbb{R}^N)$, where the weight $ω$ is an appropriate function that belongs to the Munckenhoupt class $A_{1 + \frac{2}{N}}$ and the functions $f$, $g$, $h$ and $l$ are non-negative and continuous. The main goal is to establish of gl… ▽ More In this paper, we will study the following parabolic problem $u_t - div(ω(x) \nabla u)= h(t) f(u) + l(t) g(u)$ with non-negative initial conditions pertaining to $C_b(\mathbb{R}^N)$, where the weight $ω$ is an appropriate function that belongs to the Munckenhoupt class $A_{1 + \frac{2}{N}}$ and the functions $f$, $g$, $h$ and $l$ are non-negative and continuous. The main goal is to establish of global and non-global existence of non-negative solutions. In addition, to present the particular case when $h(t) \sim t^r ~~ (r>-1)$, $l(t) \sim t^s ~~ (s>-1)$, $f(u) = u^p$ and $g(u)= (1+u)[\ln(1+u)]^p,$ we obtain both the so-called Fujita's exponent and the second critical exponent in the sense of Lee and Ni \cite{Lee-Ni}. Our results extend those obtained by Fujishima et al. \cite{Fujish} who worked when $h(t)=1$, $l(t)=0$ and $f(u)=u^p $. △ Less

Submitted 21 February, 2022; originally announced February 2022.

Transverse momentum dependent distributions in dijet and heavy hadron pair production at EIC

Authors: Rafael F. del Castillo, Miguel G. Echevarria, Yiannis Makris, Ignazio Scimemi

Abstract: We discuss the measurement of gluon transverse momentum distribution (TMD) in dijet and heavy hadron pair (HHP) production in semi-inclusive deep inelastic scattering. The factorization of these processes in impact parameter space shows the appearance of a specific new soft factor matrix element on top of angular a complex valued anomalous dimensions. We show in detail how these features can be tr… ▽ More We discuss the measurement of gluon transverse momentum distribution (TMD) in dijet and heavy hadron pair (HHP) production in semi-inclusive deep inelastic scattering. The factorization of these processes in impact parameter space shows the appearance of a specific new soft factor matrix element on top of angular a complex valued anomalous dimensions. We show in detail how these features can be treated consistently and we discuss a scale prescription for the evolution kernel of the dijet soft function. As a result we obtain phenomenological predictions for unpolarized and angular modulated cross-sections for the electron-ion collider (EIC) using current available information on unpolarized TMD. △ Less

Submitted 11 March, 2022; v1 submitted 5 November, 2021; originally announced November 2021.

Comments: 29 pages, 7 figures

Journal ref: JHEP03(2022)047

MATISSE, the VLTI mid-infrared imaging spectro-interferometer

Authors: B. Lopez, S. Lagarde, R. G. Petrov, W. Jaffe, P. Antonelli, F. Allouche, P. Berio, A. Matter, A. Meilland, F. Millour, S. Robbe-Dubois, Th. Henning, G. Weigelt, A. Glindemann, T. Agocs, Ch. Bailet, U. Beckmann, F. Bettonvil, R. van Boekel, P. Bourget, Y. Bresson, P. Bristow, P. Cruzalèbes, E. Eldswijk, Y. Fanteï Caujolle , et al. (128 additional authors not shown)

Abstract: Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have develope… ▽ More Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have developed MATISSE, the Multi AperTure mid-Infrared SpectroScopic Experiment, to access high resolution imaging in a wide spectral domain and explore topics such: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; accretion processes around super massive black holes in AGN. Methods:The instrument is a spectro-interferometric imager covering three atmospheric bands (L,M,N) from 2.8 to 13.0 mu, combining four optical beams from the VLTI's telscopes. Its concept, related observing procedure, data reduction and calibration approach are the product of 30 years of instrumental research. The instrument utilizes a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results:We provide an overview of the physical principle of the instrument and its functionalities, the characteristics of the delivered signal, a description of the observing modes and of their performance limits. An ensemble of data and reconstructed images are illustrating the first acquired key observations. Conclusion:The instrument has been in operation at Cerro Paranal, ESO, Chile since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now. △ Less

Submitted 2 March, 2022; v1 submitted 29 October, 2021; originally announced October 2021.

Comments: 24 pages, 26 figures, submitted to Astronomy & Astrophysics

Journal ref: A&A 659, A192 (2022)

Nitrogen-doped graphene based triboelectric nanogenerators

Authors: Giuseppina Pace, Michele Serri, Antonio Esau del Rio Castillo, Alberto Ansaldo, Simone Lauciello, Mirko Prato, Lea Pasquale, Jan Luxa, Vlastimil Mazánek, Zdenek Sofer, Francesco Bonaccorso

Abstract: Harvesting all sources of available clean energy is an essential strategy to contribute to healing current dependence on non-sustainable energy sources. Recently, triboelectric nanogenerators (TENGs) have gained visibility as new mechanical energy harvester offering a valid alternative to batteries, being particularly suitable for portable devices. Here, the increased capacitance of a few-layer gr… ▽ More Harvesting all sources of available clean energy is an essential strategy to contribute to healing current dependence on non-sustainable energy sources. Recently, triboelectric nanogenerators (TENGs) have gained visibility as new mechanical energy harvester offering a valid alternative to batteries, being particularly suitable for portable devices. Here, the increased capacitance of a few-layer graphene-based electrode is obtained by incorporating nitrogen-doped graphene (N_graphene), enabling a 3_fold enhancement in TENGs power output. The dependence of TENGs performance on the electronic properties of different N_graphene types, varying in the do** concentration and in the relative content of N-pyridinic and N-graphitic sites is investigated. These sites have different electron affinities, and synergistically contribute to the variation of the capacitive and resistive properties of N-graphene and consequently, TENG performance. It is demonstrated that the power enhancement of the TENG occurs when the N_graphene, an n-semiconductor, is interfaced between the positive triboelectric material and the electrode, while a deterioration of the electrical performance is observed when it is placed at the interface with the negative triboelectric material. This behavior is explained in terms of the dependence of N_graphene quantum capacitance on the electrode chemical potential which shifts according to the opposite polarization induced at the two electrodes upon triboelectrification. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Journal ref: Nano Energy Volume 87, September 2021, 106173

A deep $XMM-Newton$ observation of the X-Persei-like binary system CXOU J225355.1+624336

Authors: N. La Palombara, L. Sidoli, P. Esposito, G. L. Israel, G. A. Rodríguez Castillo

Abstract: We report on the follow-up $XMM-Newton$ observation of the persistent X-ray pulsar CXOU J225355.1+624336, discovered with the CATS@BAR project on archival $Chandra$ data. The source was detected at $f_{\rm X}$(0.5-10 keV) = 3.4$\times 10^{-12}$ erg cm$^{-2}$ s$^{-1}$, a flux level which is fully consistent with the previous observations performed with $ROSAT$, $Swift$, and $Chandra$. The measured… ▽ More We report on the follow-up $XMM-Newton$ observation of the persistent X-ray pulsar CXOU J225355.1+624336, discovered with the CATS@BAR project on archival $Chandra$ data. The source was detected at $f_{\rm X}$(0.5-10 keV) = 3.4$\times 10^{-12}$ erg cm$^{-2}$ s$^{-1}$, a flux level which is fully consistent with the previous observations performed with $ROSAT$, $Swift$, and $Chandra$. The measured pulse period $P$ = 46.753(3) s, compared with the previous measurements, implies a constant spin down at an average rate $\dot P = 5.3\times 10^{-10}$ s s$^{-1}$. The pulse profile is energy dependent, showing three peaks at low energy and a less structured profile above about 3.5 keV. The pulsed fraction slightly increases with energy. We described the time-averaged EPIC spectrum with four different emission models: a partially covered power law, a cut-off power law, and a power law with an additional thermal component (either a black body or a collisionally ionized gas). In all cases we obtained equally good fits, so it was not possible to prefer or reject any emission model on the statistical basis. However, we disfavour the presence of the thermal components, since their modeled X-ray flux, resulting from a region larger than the neutron star surface, would largely dominate the X-ray emission from the pulsar. The phase-resolved spectral analysis showed that a simple flux variation cannot explain the source variability and proved that it is characterized by a spectral variability along the pulse phase. The results of the $XMM-Newton$ observation confirmed that CXOU J225355.1+624336 is a BeXB with a low-luminosity ($L_{\rm X} \sim 10^{34-35}$ erg s$^{-1}$), a limited variability, and a constant spin down. Therefore, they reinforce the source classification as a persistent BeXB. △ Less

Submitted 19 May, 2021; v1 submitted 20 April, 2021; originally announced April 2021.

Comments: 8 pages, 3 tables, 7 figures. Accepted for publication in Astronomy and Astrophysics on 19/04/2021. File replaced to match the final accepted version

Journal ref: A&A 649, A118 (2021)

Mid-infrared circumstellar emission of the long-period Cepheid l Carinae resolved with VLTI/MATISSE

Authors: V. Hocdé, N. Nardetto, A. Matter, E. Lagadec, A. Mérand, P. Cruzalèbes, A. Meilland, F. Millour, B. Lopez, P. Berio, G. Weigelt, R. Petrov, J. W. Isbell, W. Jaffe, P. Kervella, A. Glindemann, M. Schöller, F. Allouche, A. Gallenne, A. Domiciano de Souza, G. Niccolini, E. Kokoulina, J. Varga, S. Lagarde, J. -C. Augereau , et al. (129 additional authors not shown)

Abstract: The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. W… ▽ More The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. We first use photometric observations in various bands and Spitzer Space Telescope spectroscopy to constrain the IR excess of $\ell$ Car. Then, we analyze the VLTI/MATISSE measurements at a specific phase of observation, in order to determine the flux contribution, the size and shape of the environment of the star in the L band. We finally test the hypothesis of a shell of ionized gas in order to model the IR excess. We report the first detection in the L band of a centro-symmetric extended emission around l Car, of about 1.7$R_\star$ in FWHM, producing an excess of about 7.0\% in this band. In the N band, there is no clear evidence for dust emission from VLTI/MATISSE correlated flux and Spitzer data. On the other side, the modeled shell of ionized gas implies a more compact CSE ($1.13\pm0.02\,R_\star$) and fainter (IR excess of 1\% in the L band). We provide new evidences for a compact CSE of $\ell$ Car and we demonstrate the capabilities of VLTI/MATISSE for determining common properties of CSEs. While the compact CSE of $\ell$ Car is probably of gaseous nature, the tested model of a shell of ionized gas is not able to simultaneously reproduce the IR excess and the interferometric observations. Further Galactic Cepheids observations with VLTI/MATISSE are necessary for determining the properties of CSEs, which may also depend on both the pulsation period and the evolutionary state of the stars. △ Less

Submitted 31 March, 2021; originally announced March 2021.

Comments: 13 pages, 8 figures, accepted in Astronomy and Astrophysics

The asymmetric inner disk of the Herbig Ae star HD 163296 in the eyes of VLTI/MATISSE: evidence for a vortex?

Authors: J. Varga, M. Hogerheijde, R. van Boekel, L. Klarmann, R. Petrov, L. B. F. M. Waters, S. Lagarde, E. Pantin, Ph. Berio, G. Weigelt, S. Robbe-Dubois, B. Lopez, F. Millour, J. -C. Augereau, H. Meheut, A. Meilland, Th. Henning, W. Jaffe, F. Bettonvil, P. Bristow, K. -H. Hofmann, A. Matter, G. Zins, S. Wolf, F. Allouche , et al. (111 additional authors not shown)

Abstract: Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. W… ▽ More Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. We use geometric models to fit the data. Our models include a smoothed ring, a flat disk with inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydro-dynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is $3.5 \pm 0.2$. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the $r<0.3$ au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. For the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large scale vortex may be compatible with our data. The half-light radius of the L-band emitting region is $0.33\pm 0.01$ au, the inclination is ${52^\circ}^{+5^\circ}_{-7^\circ}$, and the position angle is $143^\circ \pm 3^\circ$. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for $μ$m-sized grains. Refractory grains or large ($\gtrsim 10\ μ$m-sized) grains could be the origin for this emission. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: accepted for publication in A&A

Journal ref: A&A 647, A56 (2021)

A New Transient Ultraluminous X-ray Source in NGC 7090

Authors: D. J. Walton, M. Heida, M. Bachetti, F. Furst, M. Brightman, H. Earnshaw, P. A. Evans, A. C. Fabian, B. W. Grefenstette, F. A. Harrison, G. L. Israel, G. B. Lansbury, M. J. Middleton, S. Pike, V. Rana, T. P. Roberts, G. A. Rodriguez Castillo, R. Salvaterra, X. Song, D. Stern

Abstract: We report on the discovery of a new, transient ultraluminous X-ray source (ULX) in the galaxy NGC 7090. This new ULX, which we refer to as NGC 7090 ULX3, was discovered via monitoring with $Swift$ during 2019-20, and to date has exhibited a peak luminosity of $L_{\rm{X}} \sim 6 \times 10^{39}$ erg s$^{-1}$. Archival searches show that, prior to its recent transition into the ULX regime, ULX3 appea… ▽ More We report on the discovery of a new, transient ultraluminous X-ray source (ULX) in the galaxy NGC 7090. This new ULX, which we refer to as NGC 7090 ULX3, was discovered via monitoring with $Swift$ during 2019-20, and to date has exhibited a peak luminosity of $L_{\rm{X}} \sim 6 \times 10^{39}$ erg s$^{-1}$. Archival searches show that, prior to its recent transition into the ULX regime, ULX3 appeared to exhibit a fairly stable luminosity of $L_{\rm{X}} \sim 10^{38}$ erg s$^{-1}$. Such strong long-timescale variability may be reminiscent of the small population of known ULX pulsars, although deep follow-up observations with $XMM$-$Newton$ and $NuSTAR$ do not reveal any robust X-ray pulsation signals. Pulsations similar to those seen from known ULX pulsars cannot be completely excluded, however, as the limit on the pulsed fraction of any signal that remains undetected in these data is $\lesssim$20\%. The broadband spectrum from these observations is well modelled with a simple thin disc model, consistent with sub-Eddington accretion, which may instead imply a moderately large black hole accretor ($M_{\rm{BH}} \sim 40 ~ M_{\odot}$). Similarly, though, more complex models consistent with the super-Eddington spectra seen in other ULXs (and the known ULX pulsars) cannot be excluded given the limited signal-to-noise of the available broadband data. The nature of the accretor powering this new ULX therefore remains uncertain. △ Less

Submitted 19 November, 2020; v1 submitted 17 November, 2020; originally announced November 2020.

Comments: 11 pages, 7 figures; accepted for publication in MNRAS

Anisotropic layer-by-layer carbon nanotubes/boron nitride/rubber composite and its application in electromagnetic shielding

Authors: Yanhu Zhan, Emanuele Lago, Chiara Santillo, Antonio Esau Del Rio Castillo, Shuai Hao, Giovanna G. Buonocore, Zhenming Chen, Hesheng Xia, Marino Lavorgna, Francesco Bonaccorso

Abstract: Multifunctional polymer composites with anisotropic properties are attracting interests as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites are fabricated by combining the layer-by-layer (LBL) filtration method with the alternative assembling of carbon nanotubes (CNTs) and hexagonal boron nitride flakes (hBN) on natural rubber latex particles (… ▽ More Multifunctional polymer composites with anisotropic properties are attracting interests as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites are fabricated by combining the layer-by-layer (LBL) filtration method with the alternative assembling of carbon nanotubes (CNTs) and hexagonal boron nitride flakes (hBN) on natural rubber latex particles (NR). The layered composites exhibit anisotropic thermal and electrical conductivities, which are tailored through the layer formulations. The best composite consists of four layers of NR modified with 8 phr (parts per Hundred Rubber) CNTs (~7.4 wt%) and four alternated layers with 12 phr hBN (~10.7 wt%). The composites exhibit an electromagnetic interference (EMI) shielding effectiveness of 22.41+-0.14 dB mm-1 at 10.3 GHz and a thermal conductivity equal to 0.25 W/(mK). Furthermore, when the layered composite is used as an electrical thermal heater the surface reaches a stable temperature of ~103 C in approx. 2 min, with an input bias of 2.5 V. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Comments: 13 pages, 5 figures

Journal ref: Nanoscale, 2020,12, 7782-7791

TMD factorization for dijet and heavy-meson pair in DIS

Authors: Rafael F. del Castillo, Miguel G. Echevarria, Yiannis Makris, Ignazio Scimemi

Abstract: We study a transverse momentum dependent (TMD) factorization framework for the processes of di-jet and heavy meson pair production in deep-inelastic-scattering in an electron-proton collider, considering the measurement of the transverse momentum imbalance of the two hard probes in the Breit frame. For the factorization theorem we employ soft-collinear and boosted-heavy-quark effective field theor… ▽ More We study a transverse momentum dependent (TMD) factorization framework for the processes of di-jet and heavy meson pair production in deep-inelastic-scattering in an electron-proton collider, considering the measurement of the transverse momentum imbalance of the two hard probes in the Breit frame. For the factorization theorem we employ soft-collinear and boosted-heavy-quark effective field theories. The factorized cross-section for both processes is sensitive to gluon unpolarized and linearly polarized TMD distributions and requires the introduction of a new soft function. We calculate the new soft function here at one loop, regulating rapidity divergences with the $δ$-regulator. In addition, using a factorization consistency relation and a universality argument regarding the heavy-quark jet function, we obtain the anomalous dimension of the new soft function at two loops. △ Less

Submitted 14 December, 2020; v1 submitted 17 August, 2020; originally announced August 2020.

Comments: v4: matches published version in JHEP. v2: typos fixed, extended discussion on kinematic coverage. v1: 31 pages, 3 figures

The slow heartbeats of an ultra-luminous X-ray source in NGC 3621

Authors: S. E. Motta, M. Marelli, F. Pintore, P. Esposito, R. Salvaterra, A. De Luca, G. L. Israel, A. Tiengo, G. A. Rodríguez Castillo

Abstract: We report on the results of X-ray observations of 4XMM J111816.0-324910, a transient ultra-luminous X-ray source located in the galaxy NGC 3621. This system is characterised by a transient nature and marked variability with characteristic time-scale of ~3500 s, differently from other ULXs, which in the vast majority show limited intra-observation variability. Such a behaviour is very reminiscent o… ▽ More We report on the results of X-ray observations of 4XMM J111816.0-324910, a transient ultra-luminous X-ray source located in the galaxy NGC 3621. This system is characterised by a transient nature and marked variability with characteristic time-scale of ~3500 s, differently from other ULXs, which in the vast majority show limited intra-observation variability. Such a behaviour is very reminiscent of the so-called heartbeats sometimes observed in the Galactic black hole binary GRS 1915+105, where the variability time-scale is ~10-1000 s. We study the spectral and timing properties of this object and find that overall, once the differences in the variability time-scales are taken into account, they match quite closely those of both GRS 1915+105, and of a number of objects showing heartbeats in their light-curves, including a confirmed neutron star and a super-massive black hole powering an active galactic nucleus. We investigate the nature of the compact object in 4XMM J111816.0-324910 by searching for typical neutron star signatures and by attempting a mass estimate based on different methods and assumptions. Based on the current available data, we are not able to unambiguously determine the nature of the accreting compact object responsible for the observed phenomenology. △ Less

Submitted 11 June, 2020; v1 submitted 9 June, 2020; originally announced June 2020.

Comments: Accepted for publication in ApJ. 13 pages, 6 figures

Flexible Graphene/Carbon Nanotube Electrochemical Double-Layer Capacitors with Ultrahigh Areal Performance

Authors: Valentino Romano, Beatriz Martin-Garcia, Sebastiano Bellani, Luigi Marasco, Jaya Kumar Panda, Reinier Oropesa-Nunez, Leyla Najafi, Antonio Esau Del Rio Castillo, Mirko Prato, Elisa Mantero, Vittorio Pellegrini, Giovanna D Angelo, Francesco Bonaccorso

Abstract: The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume… ▽ More The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume (production rate ~0.5 kg/day). Commercial single/double walled carbon nanotubes (SDWCNTs) are mixed with graphene flakes in order to act as spacers between the graphene flakes during their film formation. The latter is obtained by one-step vacuum filtration, resulting in self-standing, metal- and binder-free flexible EDLC electrodes with high active material mass loadings up to 30 mg cm-2. The corresponding symmetric WJM-G/SDWCNTs EDLCs exhibit electrode energy densities of 539 uWh cm-2 at 1.3 mW cm-2 and operating power densities up to 532 mW cm-2 (outperforming most of the EDLC technologies). The EDCLs show excellent cycling stability and outstanding flexibility even under highly folded states (up to 180 degrees). The combination of industrial-like production of active materials, simplified manufacturing of EDLC electrodes, and ultrahigh areal performance of the as-produced EDLCs are promising for novel advanced EDLC designs. △ Less

Submitted 11 April, 2020; originally announced May 2020.

Journal ref: ChemPlusChem, 2019, 84, 882

Astrochemical relevance of VUV ionization of large PAH cations

Authors: Gabi Wenzel, Christine Joblin, Alexandre Giuliani, Sarah Rodriguez Castillo, Giacomo Mulas, Mingchao Ji, Hassan Sabbah, Sabela Quiroga, Diego Peña, Laurent Nahon

Abstract: As a part of interstellar dust, polycyclic aromatic hydrocarbons (PAHs) are processed by the interaction with vacuum ultraviolet (VUV) photons that are emitted by hot young stars. This interaction leads to the emission of the well-known aromatic infrared bands but also of electrons, which can significantly contribute to the heating of the interstellar gas.Our aim is to investigate the impact of mo… ▽ More As a part of interstellar dust, polycyclic aromatic hydrocarbons (PAHs) are processed by the interaction with vacuum ultraviolet (VUV) photons that are emitted by hot young stars. This interaction leads to the emission of the well-known aromatic infrared bands but also of electrons, which can significantly contribute to the heating of the interstellar gas.Our aim is to investigate the impact of molecular size on the photoionization properties of cationic PAHs.Methods. Trapped PAH cations of sizes between 30 and 48 carbon atoms were submitted to VUV photons in the range of 9 to 20 eV from the DESIRS beamline at the synchrotron SOLEIL. All resulting photoproducts including dications and fragment cations were mass-analyzed and recorded as a function of photon energy.Photoionization is found to be predominant over dissociation at all energies, which differs from an earlier study on smaller PAHs. The photoionization branching ratio reaches 0.98 at 20 eV for the largest studied PAH. The photoionization threshold is observed to be between 9.1 and 10.2 eV, in agreement with the evolution of the ionization potential with size. Ionization cross sections were indirectly obtained and photoionization yields extracted from their ratio with theoretical photoabsorption cross sections, which were calculated using time-dependent density functional theory. An analytical function was derived to calculate this yield for a given molecular size.Large PAH cations could be efficiently ionized in H i regions and provide a contribution to the heating of the gas by photoelectric effect. Also, at the border of or in H ii regions, PAHs could be exposed to photons of energy higher than 13.6 eV. Our work provides recipes to be used in astronomical models to quantify these points. △ Less

Submitted 22 July, 2020; v1 submitted 5 May, 2020; originally announced May 2020.

Comments: Astronomy and Astrophysics - A\&A, EDP Sciences, In press

Journal ref: A&A 641, A98 (2020)

NuSTAR observation of the Supergiant Fast X-ray Transient IGR J11215-5952 during its 2017 outburst

Authors: L. Sidoli, K. Postnov, A. Tiengo, P. Esposito, V. Sguera, A. Paizis, G. A. Rodrıguez Castillo

Abstract: We report on the results of a NuSTAR observation of the Supergiant Fast X-ray Transient pulsar IGRJ11215-5952 during the peak of its outburst in June 2017. IGRJ11215-5952 is the only SFXT undergoing strictly periodic outbursts, every 165 days. NuSTAR caught several X-ray flares, spanning a dynamic range of 100, and detected X-ray pulsations at 187.0 s, consistent with previous measurements. The sp… ▽ More We report on the results of a NuSTAR observation of the Supergiant Fast X-ray Transient pulsar IGRJ11215-5952 during the peak of its outburst in June 2017. IGRJ11215-5952 is the only SFXT undergoing strictly periodic outbursts, every 165 days. NuSTAR caught several X-ray flares, spanning a dynamic range of 100, and detected X-ray pulsations at 187.0 s, consistent with previous measurements. The spectrum from the whole observation is well described by an absorbed power-law (with a photon index of 1.4) modified, above 7 keV, by a cutoff with an e-folding energy of 24 keV. A weak emission line is present at 6.4 keV, consistent with Kalpha emission from cold iron in the supergiant wind. The time-averaged flux is 1.5E-10 erg/cm2/s (3-78 keV, corrected for the absorption), translating into an average luminosity of about 9E35 erg/s (1-100 keV, assuming a distance of 6.5 kpc). The NuSTAR observation allowed us to perform the most sensitive search for cyclotron resonant scattering features in the hard X-ray spectrum, resulting in no significant detection in any of the different spectral extractions adopted (time-averaged, temporally-selected, spin-phase-resolved and intensity-selected spectra). The pulse profile showed an evolution with both the energy (3-12 keV energy range compared with 12-78 keV band) and the X-ray flux: a double peaked profile was evident at higher fluxes (and in both energy bands), while a single peaked, sinusoidal profile was present at the lowest intensity state achieved within the NuSTAR observations (in both energy bands). The intensity-selected analysis allowed us to observe an anti-correlation of the pulsed fraction with the X-ray luminosity. The pulse profile evolution can be explained by X-ray photon scattering in the accreting matter above magnetic poles of a neutron star at the quasi-spherical settling accretion stage. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Comments: Accepted for publication in Astronomy & Astrophysics (Received 3 April 2020 / Accepted 17 April 2020). 14 pages, 5 Tables, 9 Figures

Journal ref: A&A 638, A71 (2020)

A very young radio-loud magnetar

Authors: P. Esposito, N. Rea, A. Borghese, F. Coti Zelati, D. Viganò, G. L. Israel, A. Tiengo, A. Ridolfi, A. Possenti, M. Burgay, D. Götz, F. Pintore, L. Stella, C. Dehman, M. Ronchi, S. Campana, A. Garcia-Garcia, V. Graber, S. Mereghetti, R. Perna, G. A. Rodríguez Castillo, R. Turolla, S. Zane

Abstract: The magnetar Swift ,J1818.0-1607 was discovered in March 2020 when Swift detected a 9 ms hard X-ray burst and a long-lived outburst. Prompt X-ray observations revealed a spin period of 1.36 s, soon confirmed by the discovery of radio pulsations. We report here on the analysis of the Swift burst and follow-up X-ray and radio observations. The burst average luminosity was… ▽ More The magnetar Swift ,J1818.0-1607 was discovered in March 2020 when Swift detected a 9 ms hard X-ray burst and a long-lived outburst. Prompt X-ray observations revealed a spin period of 1.36 s, soon confirmed by the discovery of radio pulsations. We report here on the analysis of the Swift burst and follow-up X-ray and radio observations. The burst average luminosity was $L_{\rm burst} \sim2\times 10^{39}$ erg/s (at 4.8 kpc). Simultaneous observations with XMM-Newton and NuSTAR three days after the burst provided a source spectrum well fit by an absorbed blackbody ($N_{\rm H} = (1.13\pm0.03) \times 10^{23}$ cm$^{-2}$ and $kT = 1.16\pm0.03$ keV) plus a power-law ($Γ=0.0\pm1.3$) in the 1-20 keV band, with a luminosity of $\sim$$8\times10^{34}$ erg/s, dominated by the blackbody emission. From our timing analysis, we derive a dipolar magnetic field $B \sim 7\times10^{14}$ G, spin-down luminosity $\dot{E}_{\rm rot} \sim 1.4\times10^{36}$ erg/s and characteristic age of 240 yr, the shortest currently known. Archival observations led to an upper limit on the quiescent luminosity $<$$5.5\times10^{33}$ erg/s, lower than the value expected from magnetar cooling models at the source characteristic age. A 1 hr radio observation with the Sardinia Radio Telescope taken about 1 week after the X-ray burst detected a number of strong and short radio pulses at 1.5 GHz, in addition to regular pulsed emission; they were emitted at an average rate 0.9 min$^{-1}$ and accounted for $\sim$50% of the total pulsed radio fluence. We conclude that Swift ,J1818.0-1607 is a peculiar magnetar belonging to the small, diverse group of young neutron stars with properties straddling those of rotationally and magnetically powered pulsars. Future observations will make a better estimation of the age possible by measuring the spin-down rate in quiescence. △ Less

Submitted 25 May, 2020; v1 submitted 8 April, 2020; originally announced April 2020.

Comments: 10 pages, 4 figures, 1 table; revised version accepted for publication in The Astrophysical Journal Letters

Journal ref: The Astrophysical Journal Letters, Volume 896, L30 (2020)

The lowest frequency Fast Radio Bursts: Sardinia Radio Telescope detection of the periodic FRB 180916 at 328 MHz

Authors: M. Pilia, M. Burgay, A. Possenti, A. Ridolfi, V. Gajjar, A. Corongiu, D. Perrodin, G. Bernardi, G. Naldi, G. Pupillo, F. Ambrosino, G. Bianchi, A. Burtovoi, P. Casella, C. Casentini, M. Cecconi, C. Ferrigno, M. Fiori, K. C. Gendreau, A. Ghedina, G. Naletto, L. Nicastro, P. Ochner, E. Palazzi, F. Panessa , et al. (13 additional authors not shown)

Abstract: We report on the lowest-frequency detection to date of three bursts from the fast radio burst FRB 180916, observed at 328 MHz with the Sardinia Radio Telescope (SRT). The SRT observed the periodic repeater FRB 180916 for five days from 2020 February 20 to 24 during a time interval of active radio bursting, and detected the three bursts during the first hour of observations; no more bursts were det… ▽ More We report on the lowest-frequency detection to date of three bursts from the fast radio burst FRB 180916, observed at 328 MHz with the Sardinia Radio Telescope (SRT). The SRT observed the periodic repeater FRB 180916 for five days from 2020 February 20 to 24 during a time interval of active radio bursting, and detected the three bursts during the first hour of observations; no more bursts were detected during the remaining ~ 30 hours. Simultaneous SRT observations at 1548 MHz did not detect any bursts. Burst fluences are in the range 37 to 13 Jy ms. No relevant scattering is observed for these bursts. We also present the results of the multi-wavelength campaign we performed on FRB 180916, during the five days of the active window. Simultaneously with the SRT observations, others with different time spans were performed with the Northern Cross at 408 MHz, with XMM-Newton, NICER, INTEGRAL, AGILE, and with the TNG and two optical telescopes in Asiago, which are equipped with fast photometers. XMM-Newton obtained data simultaneously with the three bursts detected by the SRT, and determined a luminosity upper limit in the 0.3-10 keV energy range of ~$10^{45}$ erg/s for the burst emission. AGILE obtained data simultaneously with the first burst and determined a fluence upper limit in the MeV range for millisecond timescales of $ 10^{-8}$ erg cm$^{-2}$.Our results show that absorption from the circumburst medium does not significantly affect the emission from FRB 180916, thus limiting the possible presence of a superluminous supernova around the source, and indicate that a cutoff for the bursting mechanism, if present, must be at lower frequencies. Our multi-wavelength campaign sensitively constrains the broadband emission from FRB 180916, and provides the best limits so far for the electromagnetic response to the radio bursting of this remarkable source of fast radio bursts. △ Less

Submitted 3 July, 2020; v1 submitted 28 March, 2020; originally announced March 2020.

Comments: ApJL, 896 L40

Single-step exfoliation and functionalization of few-layers black phosphorus and its application for polymer composites

Authors: Antonio Esau Del Rio Castillo, Christian Daniel Reyes, Laura Edith Rojas, Sanjay B. Thorat, Michele Serri, Ana Laura Martinez, Carlos Velasco, Vittorio Pellegrini, Francesco Bonaccorso

Abstract: We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process.… ▽ More We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process. We used the exfoliated and functionalised flakes as fillers in a polymethyl methacrylate matrix to test the mechanical endurance, obtaining an improvement in the Young modulus of 106% compared to the bare polymer. These data support the development of black phosphorus materials as 2D-polymer fillers and performance-enhancers. △ Less

Submitted 21 February, 2020; originally announced February 2020.

The Ultraluminous X-ray sources population of the galaxy NGC 7456

Authors: F. Pintore, M. Marelli, R. Salvaterra, G. L. Israel, G. A. Rodríguez Castillo, P. Esposito, A. Belfiore, A. De Luca, A. Wolter, S. Mereghetti, L. Stella, M. Rigoselli, H. P. Earnshaw, C. Pinto, T. P. Roberts, D. J. Walton, F. Bernardini, F. Haberl, C. Salvaggio, A. Tiengo, L. Zampieri, M. Bachetti, M. Brightman, P. Casella, D. D'Agostino , et al. (6 additional authors not shown)

Abstract: Ultraluminous X-ray sources (ULXs) are a class of accreting compact objects with X-ray luminosities above 1e39 erg/s. The ULX population counts several hundreds objects but only a minor fraction is well studied. Here we present a detailed analysis of all ULXs hosted in the galaxy NGC 7456. It was observed in X-rays only once in the past (in 2005) by XMM-Newton, but the observation was short and st… ▽ More Ultraluminous X-ray sources (ULXs) are a class of accreting compact objects with X-ray luminosities above 1e39 erg/s. The ULX population counts several hundreds objects but only a minor fraction is well studied. Here we present a detailed analysis of all ULXs hosted in the galaxy NGC 7456. It was observed in X-rays only once in the past (in 2005) by XMM-Newton, but the observation was short and strongly affected by high background. In 2018, we obtained a new, deeper (~90 ks) XMM-Newton observation that allowed us to perform a detailed characterization of the ULXs hosted in the galaxy. ULX-1 and ULX-2, the two brightest objects (Lx~(6-10)e39 erg/s), have spectra that can be described by a two-thermal component model as often found in ULXs. ULX-1 shows also one order of magnitude in flux variability on short-term timescales (hundreds to thousand ks). The other sources (ULX-3 and ULX-4) show flux changes of at least an order of magnitude, and these objects may be candidate transient ULXs although longer X-ray monitoring or further studies are required to ascribe them to the ULX population. In addition, we found a previously undetected source that might be a new candidate ULX (labelled as ULX-5) with a luminosity of ~1e39 erg/s and hard power-law spectral shape, whose nature is still unclear and for which a background Active Galactic Nucleus cannot be excluded. We discuss the properties of all the ULXs in NGC 7456 within the framework of super-Eddington accretion onto stellar mass compact objects. Although no pulsations were detected, we cannot exclude that the sources host neutron stars. △ Less

Submitted 27 January, 2020; v1 submitted 23 January, 2020; originally announced January 2020.

Comments: Accepted on ApJ; 10 pages, 5 figures, 3 tables

Photo-processing of astro-PAHs

Authors: Christine Joblin, Gabi Wenzel, Sarah Rodriguez Castillo, Aude Simon, Hassan Sabbah, Anthony Bonnamy, Dominique Toublanc, Giacomo Mulas, Mingchao Ji, Alexandre Giuliani, Laurent Nahon

Abstract: Polycyclic aromatic hydrocarbons (PAHs) are key species in astrophysical environments in which vacuum ultraviolet (VUV) photons are present, such as star-forming regions. The interaction with these VUV photons governs the physical and chemical evolution of PAHs. Models show that only large species can survive. However, the actual molecular properties of large PAHs are poorly characterized and the… ▽ More Polycyclic aromatic hydrocarbons (PAHs) are key species in astrophysical environments in which vacuum ultraviolet (VUV) photons are present, such as star-forming regions. The interaction with these VUV photons governs the physical and chemical evolution of PAHs. Models show that only large species can survive. However, the actual molecular properties of large PAHs are poorly characterized and the ones included in models are only an extrapolation of the properties of small and medium-sized species. We discuss here experiments performed on trapped ions including some at the SOLEIL VUV beam line DESIRS. We focus on the case of the large dicoronylene cation, C48H20+ , and compare its behavior under VUV processing with that of smaller species. We suggest that C2H2 is not a relevant channel in the fragmentation of large PAHs. Ionization is found to largely dominate fragmentation. In addition, we report evidence for a hydrogen dissociation channel through excited electronic states. Although this channel is minor, it is already effective below 13.6 eV and can significantly influence the stability of astro-PAHs. We emphasize that the competition between ionization and dissociation in large PAHs should be further evaluated for their use in astrophysical models. △ Less

Submitted 6 December, 2019; originally announced December 2019.

Journal ref: Journal of Physics: Conference Series, IOP Publishing, In press

CVD-graphene/graphene flakes dual-films as advanced DSSC counter electrodes

Authors: Andrea Capasso, Sebastiano Bellani, Alessandro Lorenzo Palma, Leyla Najafi1, Antonio Esaù Del Rio Castillo, Nicola Curreli1, Lucio Cinà, Vaidotas Miseikis, Camilla Coletti, Giuseppe Calogero, Vittorio Pellegrini, Aldo Di Carlo, Francesco Bonaccorso

Abstract: The use of graphene-based electrodes is burgeoning in a wide range of applications, including solar cells, light emitting diodes, touch screens, field-effect transistors, photodetectors, sensors and energy storage systems. The success of such electrodes strongly depends on the implementation of effective production and processing methods for graphene. In this work, we take advantage of two differe… ▽ More The use of graphene-based electrodes is burgeoning in a wide range of applications, including solar cells, light emitting diodes, touch screens, field-effect transistors, photodetectors, sensors and energy storage systems. The success of such electrodes strongly depends on the implementation of effective production and processing methods for graphene. In this work, we take advantage of two different graphene production methods to design an advanced, conductive oxide- and platinum-free, graphene-based counter electrode for dye-sensitized solar cells (DSSCs). In particular, we exploit the combination of a graphene film, produced by chemical vapor deposition (CVD) (CVD-graphene), with few-layer graphene (FLG) flakes, produced by liquid phase exfoliation. The CVD-graphene is used as charge collector, while the FLG flakes, deposited atop by spray coating, act as catalyst for the reduction of the electrolyte redox couple (i.e., I3-/I-- and Co+2/+3). The as-produced counter electrodes are tested in both I3-/I-- and Co+2/+3-based semitransparent DSSCs, showing power conversion efficiencies of 2.1% and 5.09%, respectively, under 1 SUN illumination. At 0.1 SUN, Co+2/+3-based DSSCs achieve a power conversion efficiency as high as 6.87%. Our results demonstrate that the electrical, optical, chemical and catalytic properties of graphene-based dual films, designed by combining CVD-graphene and FLG flakes, are effective alternatives to FTO/Pt counter electrodes for DSSCs for both outdoor and indoor applications. △ Less

Submitted 31 October, 2019; originally announced October 2019.

Journal ref: 2D Materials, 2019, 6 035007

Diffuse X-ray emission around an ultraluminous X-ray pulsar

Authors: Andrea Belfiore, Paolo Esposito, Fabio Pintore, Giovanni Novara, Ruben Salvaterra, Andrea De Luca, Andrea Tiengo, Patrizia Caraveo, Felix Fuerst, Gian Luca Israel, Danilo Magistrali, Martino Marelli, Sandro Mereghetti, Alessandro Papitto, Guillermo Rodriguez Castillo, Chiara Salvaggio, Luigi Stella, Dominic Walton, Anna Wolter, Luca Zampieri

Abstract: Ultraluminous X-ray sources (ULXs) are extragalactic X-ray emitters located off-center of their host galaxy and with a luminosity in excess of a few ${10^{39}\text{ erg s}^{-1}}$, if emitted isotropically. The discovery of periodic modulation revealed that in some ULXs the accreting compact object is a neutron star, indicating luminosities substantially above their Eddington limit. The most extrem… ▽ More Ultraluminous X-ray sources (ULXs) are extragalactic X-ray emitters located off-center of their host galaxy and with a luminosity in excess of a few ${10^{39}\text{ erg s}^{-1}}$, if emitted isotropically. The discovery of periodic modulation revealed that in some ULXs the accreting compact object is a neutron star, indicating luminosities substantially above their Eddington limit. The most extreme object in this respect is ${NGC 5907~ULX-1}$ (ULX1), with a peak luminosity that is 500 times its Eddington limit. During a Chandra observation to probe a low state of ULX1, we detected diffuse X-ray emission at the position of ULX1. Its diameter is $2.7 \pm 1.0$ arcsec and contains 25 photons, none below 0.8 keV. We interpret this extended structure as an expanding nebula powered by the wind of ULX1. Its diameter of about ${200\text{ pc}}$, characteristic energy of ${\sim 1.9\text{ keV}}$, and luminosity of ${\sim 2\times10^{38}\text{ erg s}^{-1}}$ imply a mechanical power of ${1.3\times10^{41}\text{ erg s}^{-1}}$ and an age ${\sim 7 \times 10^{4}\text{ yr}}$. This interpretation suggests that a genuinely super-Eddington regime can be sustained for time scales much longer than the spin-up time of the neutron star powering the system. As the mechanical power from a single ULX nebula can rival the injection rate of cosmic rays of an entire galaxy, ULX nebulae could be important cosmic ray accelerators. △ Less

Submitted 25 October, 2019; originally announced October 2019.

Comments: 28 pages, 6 figures, 1 table - accepted for publication

Measurement of the muon neutrino charged-current single $π^+$ production on hydrocarbon using the T2K off-axis near detector ND280

Authors: K. Abe, R. Akutsu, A. Ali, C. Alt, J. Amey, C. Andreopoulos, L. Anthony, M. Antonova, S. Aoki, A. Ariga, Y. Ashida, E. T. Atkin, Y. Awataguchi, Y. Azuma, S. Ban, M. Barbi, G. J. Barker, G. Barr, C. Barry, M. Batkiewicz-Kwasniak, A. Beloshapkin, F. Bench, V. Berardi, S. Berkman, R. M. Berner , et al. (356 additional authors not shown)

Abstract: We report the measurements of single and double differential cross section of muon neutrino charged-current interactions on carbon with a single positively charged pion in the final state at the T2K off-axis near detector using $5.56\times10^{20}$ protons on target. The analysis uses data control samples for the background subtraction and the cross section signal, defined as a single negatively ch… ▽ More We report the measurements of single and double differential cross section of muon neutrino charged-current interactions on carbon with a single positively charged pion in the final state at the T2K off-axis near detector using $5.56\times10^{20}$ protons on target. The analysis uses data control samples for the background subtraction and the cross section signal, defined as a single negatively charged muon and a single positively charged pion exiting from the target nucleus, is extracted using an unfolding method. The model dependent cross section, integrated over the T2K off-axis neutrino beam spectrum peaking at $0.6$~GeV, is measured to be $σ= (11.76 \pm 0.44 \text{(stat)} \pm 2.39 \text{(syst)}) \times 10^{-40} \text{cm}^2$~$\text{nucleon}^{-1}$. Various differential cross sections are measured, including the first measurement of the Adler angles for single charged pion production in neutrino interactions with heavy nuclei target. △ Less

Submitted 17 September, 2019; v1 submitted 9 September, 2019; originally announced September 2019.

Journal ref: Phys. Rev. D 101, 012007 (2020)

Discovery of a 2.8 s pulsar in a 2 d orbit High-Mass X-ray Binary powering the Ultraluminous X-ray source ULX-7 in M51

Authors: G. A. Rodríguez Castillo, G. L. Israel, A. Belfiore, F. Bernardini, P. Esposito, F. Pintore, A. De Luca, A. Papitto, L. Stella, A. Tiengo, L. Zampieri, M. Bachetti, M. Brightman, P. Casella, D. D'Agostino, S. Dall'Osso, H. P. Earnshaw, F. Fürst, F. Haberl, F. A. Harrison, M. Mapelli, M. Marelli, M. Middleton, C. Pinto, T. P. Roberts , et al. (4 additional authors not shown)

Abstract: We discovered 2.8 s pulsations in the X-ray emission of the ultraluminous X-ray source (ULX) M51 ULX-7 within the UNSEeN project, which was designed to hunt for new pulsating ULXs (PULXs) with XMM-Newton. The pulse shape is sinusoidal and large variations of its amplitude were observed even within single exposures (pulsed fraction from less than 5% to 20%). M51 ULX-7 is a variable source, generall… ▽ More We discovered 2.8 s pulsations in the X-ray emission of the ultraluminous X-ray source (ULX) M51 ULX-7 within the UNSEeN project, which was designed to hunt for new pulsating ULXs (PULXs) with XMM-Newton. The pulse shape is sinusoidal and large variations of its amplitude were observed even within single exposures (pulsed fraction from less than 5% to 20%). M51 ULX-7 is a variable source, generally observed at an X-ray luminosity between $10^{39}$ and $10^{40}$ erg s$^{-1}$, located in the outskirts of the spiral galaxy M51a at a distance of 8.6 Mpc. According to our analysis, the X-ray pulsar orbits in a 2-d binary with a projected semi-major axis $a_\mathrm{X} \sin i \simeq$ 28 lt-s. For a neutron star (NS) of 1.4 $M_{\odot}$, this implies a lower limit on the companion mass of 8 $M_{\odot}$, placing the system hosting M51 ULX-7 in the high-mass X-ray binary class. The barycentric pulse period decreased by $\simeq$0.4 ms in the 31 d spanned by our May -- June 2018 observations, corresponding to a spin-up rate $\dot{P} \simeq -1.5\times10^{-10}\text{s s}^{-1}$. In an archival 2005 XMM-Newton exposure, we measured a spin period of $\sim$3.3 s, indicating a secular spin-up of $\dot{P}_{\mathrm{sec}}\simeq -10^{-9}\text{ s s}^{-1}$, a value in the range of other known PULXs. Our findings suggest that the system consists of an OB giant and a moderately magnetic (dipole field component in the range $10^{12}$ G $\lesssim B_{\mathrm{dip}}\lesssim 10^{13}$G) accreting NS with weakly beamed emission ($1/12\lesssim b\lesssim1/4$). △ Less

Submitted 11 May, 2020; v1 submitted 11 June, 2019; originally announced June 2019.

Comments: Accepted for publication in The Astrophysical Journal

Liquid-phase exfoliated indium-selenide flakes and their application in hydrogen evolution reaction

Authors: Elisa Petroni, Emanuele Lago, Sebastiano Bellani, Danil W. Boukhvalov, Antonio Politano, Bekir Gurbulak, Songul Duman, Mirko Prato, Silvia Gentiluomo, Reinier Oropesa-Nunez, Jaya-Kumar Panda, Peter S. Toth, Antonio Esau Del Rio Castillo, Vittorio Pellegrini, Francesco Bonaccorso

Abstract: Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging fro… ▽ More Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few um, and thicknesses ranging from 1 to 20 nm, with a max population centred at ~ 5 nm, corresponding to 4 Se-In-In-Se quaternary layers. We also show that no formation of further InSe-based compounds (such as In2Se3) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. We highlight the dependence of the InSe flakes morphologies, i.e., surface area and thickness, on the HER performances achieving best efficiencies with small flakes offering predominant edge effects. Our theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 39 pages

Journal ref: Small, Volume 14, Issue 26, June 27, 2018 1800749

Scalable production of graphene inks via wet-jet milling exfoliation for screen-printed micro-supercapacitors

Authors: Sebastiano Bellani, Elisa Petroni, Antonio Esau Del Rio Castillo, Nicola Curreli, Beatriz Martin-Garcia, Reinier Oropesa-Nunez, Mirko Prato, Francesco Bonaccorso

Abstract: The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing meth… ▽ More The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing methods is crucial for the widespread application of MSCs. Here, we report wet-jet milling exfoliation of graphite to scale-up the production of graphene as supercapacitor material. The formulation of aqueous/alcohol-based graphene inks allows metal-free, flexible MSCs to be screen-printed. These MSCs exhibit areal capacitance (Careal) values up to 1.324 mF cm-2 (5.296 mF cm-2 for a single electrode), corresponding to an outstanding volumetric capacitance (Cvol) of 0.490 F cm-3 (1.961 F cm-3 for a single electrode). The screen-printed MSCs can operate up to power density above 20 mW cm-2 at energy density of 0.064 uWh cm-2. The devices exhibit excellent cycling stability over charge-discharge cycling (10000 cycles), bending cycling (100 cycles at bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate-encapsulated MSCs retain their electrochemical properties after a home-laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: Advanced Functional Materials, 2019

WS2-graphite dual-ion battery

Authors: Sebastiano Bellani, Faxing Wang, Gianluca Longoni, Leyla Najafi, Reinier Oropesa-Nunnez, Antonio E. Del Rio Castillo, Mirko Prato, Xiaodong Zhuang, Vittorio Pellegrini, Xinliang Feng, Francesco Bonaccorso

Abstract: A novel WS2-graphite dual-ion battery (DIB) is developed by combining together a conventional graphite cathode and high-capacity few-layer WS2 flakes anode. The WS2 flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows mass production of few-layer WS2 flakes in dispersion, with an exfoliation yield of 100%. The WS2-anodes enable DIBs, based on hexafluorophosphate (PF6-)… ▽ More A novel WS2-graphite dual-ion battery (DIB) is developed by combining together a conventional graphite cathode and high-capacity few-layer WS2 flakes anode. The WS2 flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows mass production of few-layer WS2 flakes in dispersion, with an exfoliation yield of 100%. The WS2-anodes enable DIBs, based on hexafluorophosphate (PF6-) and lithium (Li+) ions, to achieve charge specific capacities of 457, 438, 421, 403, 295 and 169 mAh g-1 at current rates of 0.1, 0.2, 0.3, 0.4, 0.8 and 1.0 A g-1, respectively, outperforming conventional DIBs. The WS2-based DIBs operate in the 0 to 4 V cell voltage range, thus extending the operating voltage window of conventional WS2-based Li-ion batteries (LIBs). These results demonstrate a new route towards the exploitation of WS2, and possibly other transition metal dichalcogenides (TMDs), for the development of next-generation energy storage devices. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: Nano Lett. 2018, 18, 7155-7164

MoS2 Quantum Dot/Graphene Hybrids for Advanced Interface Engineering of CH3NH3PbI3 Perovskite Solar Cell with Efficiency over 20%

Authors: Leyla Najafi, Babak Taheri, Beatriz Martin-Garcia, Sebastiano Bellani, Diego Di Girolamo, Antonio Agresti, Reinier Oropesa-Nunez, Sara Pescetelli, Luigi Vesce, Emanuele Calabro, Mirko Prato, Antonio E. Del Rio Castillo, Aldo Di Carlo, Francesco Bonaccorso

Abstract: Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids betwee… ▽ More Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids between molybdenum disulfide (MoS2) and reduced graphene oxide (RGO) as hole transport layer (HTL) and active buffer layer (ABL) in mesoscopic methylammonium lead iodide (CH3NH3PbI3) perovskite (MAPbI3)-based PSC. We show that zero-dimensional MoS2 quantum dots (MoS2 QDs), derived by liquid phase exfoliated MoS2 flakes, provide both hole-extraction and electron-blocking properties. In fact, on the one hand, intrinsic n-type do**-induced intra-band gap states effectively extract the holes through an electron injection mechanism. On the other hand, quantum confinement effects increase the optical band gap of MoS2 (from 1.4 eV for the flakes to > 3.2 for QDs), raising the minimum energy of its conduction band (from -4.3 eV for the flakes to -2.2 eV for QDs) above the one of conduction band of MAPbI3 (between -3.7 and -4 eV) and hindering electron collection. The van der Waals hybridization of MoS2 QDs with functionalized reduced graphene oxide (f-RGO), obtained by chemical silanization-induced linkage between RGO and (3-mercaptopropyl)trimethoxysilane, is effective to homogenize the deposition of HTLs or ABLs onto the perovskite film, since the two-dimensional (2D) nature of RGO effectively plug the pinholes of the MoS2 QDs films. Our graphene interface engineering (GIE) strategy based on van der Waals MoS2 QD/graphene hybrids enable MAPbI3-based PSCs to achieve PCE up to 20.12% (average PCE of 18.8%). △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: ACS Nano, 2018, 12, 10736-10754

Engineered MoSe2-based heterostructures for efficient electrochemical hydrogen evolution reaction

Authors: Leyla Najafi, Sebastiano Bellani, Reinier Oropesa-Nuñez, Alberto Ansaldo, Mirko Prato, Antonio Esau Del Rio Castillo, Francesco Bonaccorso

Abstract: Two-dimensional transition metal-dichalcogenides are emerging as efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER-electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Here, we tackle the key challenge that is increasing the number o… ▽ More Two-dimensional transition metal-dichalcogenides are emerging as efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER-electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Here, we tackle the key challenge that is increasing the number of electrocatalytic sites by designing and engineering heterostructures composed of single-/few-layer MoSe2 flakes and carbon nanomaterials (graphene or single-wall carbon nanotubes (SWNTs)) produced by solution processing. The electrochemical coupling between the materials that comprise the heterostructure effectively enhances the HER-electrocatalytic activity of the native MoSe2 flakes. The optimization of the mass loading of MoSe2 flakes and their electrode assembly via monolithic heterostructure stacking provided a cathodic current density of 10mAcm-2 at overpotential of 100mV, a Tafel slope of 63mVdec-1 and an exchange current density (j0) of 0.203 Acm-2. In addition, electrode thermal annealing in a hydrogen environment and chemical bathing in n-butyllithium are exploited to texturize the basal planes of the MoSe2 flakes (through Se-vacancies creation) and to achieve in situ semiconducting-to-metallic phase conversion, respectively, thus they activate new HER-electrocatalytic sites. The as-engineered electrodes show a 4.8-fold enhancement of j0 and a decrease in the Tafel slope to 54mVdec-1. △ Less

Submitted 21 March, 2019; originally announced March 2019.