Showing 1–50 of 103 results for author: Castillo, E

Magneto-electric decoupling in bismuth ferrite

Authors: Thien Thanh Dang, Juliana Heiniger-Schell, Astita Dubey, João Nuno Gonçalves, Marianela Escobar Castillo, Daniil Lewin, Ian Chang Jie Yap, Adeleh Mokhles Gerami, Sobhan Mohammadi Fathabad, Dmitry Zyabkin, Doru Constantin Lupascu

Abstract: It is still under intensive discussion, how magnetoelectric coupling actually occurs at the atomic scale in multiferroic BiFeO3. Nuclear solid-state techniques monitor local fields at the atomic scale. Using such an approach, we show that, contrary to our own expectation, ferroelectric and magnetic ordering in bismuth ferrite (BiFeO3 or BFO) decouple at the unit-cell level. Time differential pertu… ▽ More It is still under intensive discussion, how magnetoelectric coupling actually occurs at the atomic scale in multiferroic BiFeO3. Nuclear solid-state techniques monitor local fields at the atomic scale. Using such an approach, we show that, contrary to our own expectation, ferroelectric and magnetic ordering in bismuth ferrite (BiFeO3 or BFO) decouple at the unit-cell level. Time differential perturbed angular correlation (TDPAC) data at temperatures below, close, and above the magnetic Néel temperature show that the coupling of the ferroelectric order to magnetization is completely absent at the bismuth site. It is common understanding that the antiferromagnetic order and the cycloidal ordering due to the Dzyaloshinskii-Moriya interaction generate a net zero magnetization of the sample cancelling any magnetoelectric effect at the macroscopic level. Our previous data show that a very large coupling of magnetic moment and electrical distortions arises on the magnetic sub-lattice (Fe-site). The oxygen octahedra around the iron site experience a large tilt due to the onset of magnetic ordering. Nevertheless, the Bi-containing complementary sub-lattice carrying the ferroelectric order is practically unaffected by this large structural change in its direct vicinity. The magnetoelectric coupling thus vanishes already at the unit cell level. These experimental results agree well with an ab-initio density functional theory (DFT) calculation. △ Less

Submitted 23 June, 2024; originally announced June 2024.

Comments: Submitted to Nature Materials and under reviewing, 23 pages, 14 figures

Topological susceptibility and axion potential in two-flavor superconductive quark matter

Authors: Fabrizio Murgana, David E. Alvarez Castillo, Ana G. Grunfeld, Marco Ruggieri

Abstract: We study the potential of the axion, $a$, of Quantum Chromodynamics, in the two-flavor color superconducting phase of cold and dense quark matter. We adopt a Nambu-Jona-Lasinio-like model. Our interaction contains two terms, one preserving and one breaking the $U(1)_A$ symmetry: the latter is responsible of the coupling of axions to quarks. We introduce two quark condensates, $h_L$ and $h_R$, desc… ▽ More We study the potential of the axion, $a$, of Quantum Chromodynamics, in the two-flavor color superconducting phase of cold and dense quark matter. We adopt a Nambu-Jona-Lasinio-like model. Our interaction contains two terms, one preserving and one breaking the $U(1)_A$ symmetry: the latter is responsible of the coupling of axions to quarks. We introduce two quark condensates, $h_L$ and $h_R$, describing condensation for left-handed and right-handed quarks respectively; we then study the loci of the minima of the thermodynamic potential, $Ω$, in the $(h_L,h_R)$ plane, noticing how the instanton-induced interaction favors condensation in the scalar channel when the $θ-$angle, $θ=a/f_a$, vanishes. Increasing $θ$ we find a phase transition where the scalar condensate rotates into a pseudo-scalar one. We present an analytical result for the topological susceptibility, $χ$, in the superconductive phase, which stands both at zero and at finite temperature. Finally, we compute the axion mass and its self-coupling. In particular, the axion mass $m_a$ is related to the full topological susceptibility via $χ=m_a^2 f_a^2$, hence our result for $χ$ gives an analytical result for $m_a$ in the superconductive phase of high-density Quantum Chromodynamics. △ Less

Submitted 1 July, 2024; v1 submitted 22 April, 2024; originally announced April 2024.

Comments: Few references added, few typos corrected, upgraded Fig.3 and Fig.6. Version accepted for publication on Physical Review D

Enhancing Hemodynamic Parameter Estimations: Nonlinear Blood Behavior in 4D Flow MRI

Authors: Hernán Mella, Felipe Galarce, Tetsuro Sekine, Julio Sotelo, Ernesto Castillo

Abstract: Hemodynamic parameters have been estimated assuming a Newtonian constant viscosity, even when blood exhibits shear-thinning behavior. This article investigates the influence of blood rheology and hematocrit percentage on estimating Wall Shear Stress (WSS) and Energy Loss ($E_L$) at different time instants of the cardiac cycle, as well as the Oscillatory Shear Index (OSI). We specifically focus on… ▽ More Hemodynamic parameters have been estimated assuming a Newtonian constant viscosity, even when blood exhibits shear-thinning behavior. This article investigates the influence of blood rheology and hematocrit percentage on estimating Wall Shear Stress (WSS) and Energy Loss ($E_L$) at different time instants of the cardiac cycle, as well as the Oscillatory Shear Index (OSI). We specifically focus on a hematocrit-dependent power-law non-Newtonian model, considering a wide range of hematocrit values. The rheological parameters are obtained from experimentally fitted data reported previously. This study contributes to understanding the impact of blood rheology on hemodynamic parameter estimations using both in-silico and in-vivo aortic 4D Flow magnetic resonance images. Across all cases, we systematically compared WSS, $E_L$, and OSI parameters using Newtonian and power-law models, highlighting the crucial role of blood rheology in accurately assessing cardiovascular diseases. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Extracting and visualizing a new classification system for Colombia's National Administrative Department of Statistics. A visual analytics framework case study

Authors: Pierre Raimbaud, Jaime Camilo Espitia Castillo, John Guerra-Gomez

Abstract: In a world filled with data, it is expected for a nation to take decisions informed by data. However, countries need to first collect and publish such data in a way meaningful for both citizens and policy makers. A good thematic classification could be instrumental in hel** users navigate and find the right resources on a rich data repository as the one collected by Colombia's National Administr… ▽ More In a world filled with data, it is expected for a nation to take decisions informed by data. However, countries need to first collect and publish such data in a way meaningful for both citizens and policy makers. A good thematic classification could be instrumental in hel** users navigate and find the right resources on a rich data repository as the one collected by Colombia's National Administrative Department of Statistics (DANE). The Visual Analytics Framework is a methodology for conducting visual analysis developed by T. Munzner et al. [T. Munzner, Visualization Analysis and Design, A K Peters Visualization Series, 1, 2014] that could help with this task. This paper presents a case study applying such framework conducted to help the DANE better visualize their data repository, and present a more understandable classification of it. It describes three main analysis tasks identified, the proposed solutions and the collection of insights generated from them. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: V Jornadas Iberoamericanas de Interacci{ó}n Humano-Computador 2019, Benem{é}rita Universidad Aut{ó}noma de Puebla, Jun 2019, Puebla (Mexico), Mexico

High Order Mimetic Symplectic Methods For Hamiltonian Systems

Authors: Anand Srinivasan, Jose E. Castillo

Abstract: Hamiltonian systems are known to conserve the Hamiltonian function, which describes the energy evolution over time. Obtaining a numerical spatio-temporal scheme that accurately preserves the discretized Hamiltonian function is often a challenge. In this paper, the use of high order mimetic spatial schemes is investigated for the numerical solution of Hamiltonian equations. The mimetic operators ar… ▽ More Hamiltonian systems are known to conserve the Hamiltonian function, which describes the energy evolution over time. Obtaining a numerical spatio-temporal scheme that accurately preserves the discretized Hamiltonian function is often a challenge. In this paper, the use of high order mimetic spatial schemes is investigated for the numerical solution of Hamiltonian equations. The mimetic operators are based on develo** high order discrete analogs of the vector calculus quantities divergence and gradient. The resulting high order operators preserve the properties of their continuum ones, and are therefore said to mimic properties of conservation laws and symmetries. Symplectic fourth order schemes are implemented in this paper for the time integration of Hamiltonian systems. A theoretical framework for the energy preserving nature of the resulting schemes is also presented, followed by numerical examples. △ Less

Submitted 7 October, 2023; originally announced October 2023.

Implicit-explicit schemes for incompressible flow problems with variable viscosity

Authors: Gabriel R. Barrenechea, Ernesto Castillo, Douglas R. Q. Pacheco

Abstract: In this work we study different Implicit-Explicit (IMEX) schemes for incompressible flow problems with variable viscosity. Unlike most previous work on IMEX schemes, which focuses on the convective part, we here focus on treating parts of the diffusive term explicitly to reduce the coupling between the velocity components. We present different, both monolithic and fractional-step, IMEX alternative… ▽ More In this work we study different Implicit-Explicit (IMEX) schemes for incompressible flow problems with variable viscosity. Unlike most previous work on IMEX schemes, which focuses on the convective part, we here focus on treating parts of the diffusive term explicitly to reduce the coupling between the velocity components. We present different, both monolithic and fractional-step, IMEX alternatives for the variable-viscosity Navier--Stokes system, analysing their theoretical and algorithmic properties. Stability results are proven for all the methods presented, with all these results being unconditional, except for one of the discretisations using a fractional-step scheme, where a CFL condition (in terms of the problem data) is required for showing stability. Our analysis is supported by a series of numerical experiments. △ Less

Submitted 6 October, 2023; originally announced October 2023.

$p$-Laplacian operator with potential in generalized Morrey Spaces

Authors: René Erlin Castillo, Héctor Camilo Chaparro

Abstract: We study some basic properties of generalized Morrey spaces $\mathcal{M}^{p,φ}(\R^{d})$. Also, the problem $-\mbox{div}(|\nabla u|^{p-2}\nabla u)+V|u|^{p-2}u=0$ in $Ω$, where $Ω$ is a bounded open set in $\R^d$, and potential $V$ is assumed to be not equivalent to zero and lies in $\mathcal{M}^{p,φ}(Ω)$, is studied. Finally, we establish the strong unique continuation for the $p$-Laplace operator… ▽ More We study some basic properties of generalized Morrey spaces $\mathcal{M}^{p,φ}(\R^{d})$. Also, the problem $-\mbox{div}(|\nabla u|^{p-2}\nabla u)+V|u|^{p-2}u=0$ in $Ω$, where $Ω$ is a bounded open set in $\R^d$, and potential $V$ is assumed to be not equivalent to zero and lies in $\mathcal{M}^{p,φ}(Ω)$, is studied. Finally, we establish the strong unique continuation for the $p$-Laplace operator in the case $V\in\mathcal{M}^{p,φ}(\R^d)$. △ Less

Submitted 8 August, 2023; originally announced August 2023.

MSC Class: 35J05; 46E30; 26D10

Exploring the axion potential and axion walls in dense quark matter

Authors: Bonan Zhang, David E. A. Castillo, Ana G. Grunfeld, Marco Ruggieri

Abstract: We study the potential of the Quantum Chromodynamics axion in hot and/or dense quark matter, within a Nambu-Jona-Lasinio-like model that includes the coupling of the axion to quarks. Differently from previous studies, we implement local electrical neutrality and $β-$equilibrium, which are relevant for the description of the quark matter in the core of compact stellar objects. Firstly we compute th… ▽ More We study the potential of the Quantum Chromodynamics axion in hot and/or dense quark matter, within a Nambu-Jona-Lasinio-like model that includes the coupling of the axion to quarks. Differently from previous studies, we implement local electrical neutrality and $β-$equilibrium, which are relevant for the description of the quark matter in the core of compact stellar objects. Firstly we compute the effects of the chiral crossover on the axion mass and self-coupling. We find that the low energy properties of axion are very sensitive to the phase transition of Quantum Chromodynamics, in particular, when the bulk quark matter is close to criticality. Then, for the first time in the literature we compute the axion potential at finite quark chemical potential and study the axion domain walls in bulk quark matter. We find that the energy barrier between two adjacent vacuum states decrease in the chirally restored phase: this results in a lower surface tension of the walls. Finally, we comment on the possibility of production of walls in dense quark matter. △ Less

Submitted 20 April, 2023; originally announced April 2023.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. D 108, 054010 (2023)

A simple model for dynamic heterogeneity in glass-forming liquids

Authors: Rajib K. Pandit, Horacio E. Castillo

Abstract: Liquids near the glass transition exhibit dynamical heterogeneity, i.e. local relaxation rates fluctuate strongly over space and time. Here we introduce a simple continuum model that allows for quantitative predictions for the correlators describing these fluctuations. We find remarkable agreement of the model predictions for the dynamic susceptibility $χ_4(t)$ with numerical results for a binary… ▽ More Liquids near the glass transition exhibit dynamical heterogeneity, i.e. local relaxation rates fluctuate strongly over space and time. Here we introduce a simple continuum model that allows for quantitative predictions for the correlators describing these fluctuations. We find remarkable agreement of the model predictions for the dynamic susceptibility $χ_4(t)$ with numerical results for a binary hard-sphere liquid and for a Kob-Andersen Lennard-Jones mixture. Under this model, the lifetime $τ_{\rm ex}$ of the heterogeneities has little effect on the position $t = t_4 \sim τ_α$ of the peak of $χ_4(t)$, but it controls the decay of $χ_4(t)$ after the peak, and we show how to estimate it from this decay. △ Less

Submitted 21 October, 2023; v1 submitted 25 December, 2022; originally announced December 2022.

Comments: v3: Simplified notation to improve readability. Added one figure. Fixed one error. Now 4 figures plus one figure in supplemental material. v4: One footnote added. Fig 4 color labeling fixed

Journal ref: Phys. Rev. Lett. 131, 218202 (2023)

Registration-free localization of defects in 3-D parts from mesh metrology data using functional maps

Authors: Xueqi Zhao, Enrique del Castillo

Abstract: Spectral Laplacian methods, widely used in computer graphics and manifold learning, have been recently proposed for the Statistical Process Control (SPC) of a sequence of manufactured parts, whose 3-dimensional metrology is acquired with non-contact sensors. These techniques provide an {\em intrinsic} solution to the SPC problem, that is, a solution exclusively based on measurements on the scanned… ▽ More Spectral Laplacian methods, widely used in computer graphics and manifold learning, have been recently proposed for the Statistical Process Control (SPC) of a sequence of manufactured parts, whose 3-dimensional metrology is acquired with non-contact sensors. These techniques provide an {\em intrinsic} solution to the SPC problem, that is, a solution exclusively based on measurements on the scanned surfaces or 2-manifolds without making reference to their ambient space. These methods, therefore, avoid the computationally expensive, non-convex registration step needed to align the parts, as required by previous methods for SPC based on 3-dimensional measurements. Once a SPC mechanism triggers and out-of-control alarm, however, an additional problem remains: that of locating where on the surface of the part that triggered the SPC alarm there is a significant shape difference with respect to either an in-control part or its nominal (CAD) design. In the past, only registration-based solutions existed for this problem. In this paper, we present a new registration-free solution to the part localization problem. Our approach uses a functional map between the manifolds to be compared, that is, a map between functions defined on each manifold based on intrinsic differential operators, in particular, the Laplace-Beltrami operator, in order to construct a point to point map** between the two manifolds and be able to locate defects on the suspected part. A recursive partitioning algorithm is presented to define a region of interest on the surface of the part where defects are likely to occur, which results in considerable computational advantages. The functional map method involves a very large number of point-to-point comparisons based on noisy measurements, and a statistical thresholding method is presented to filter the false positives in the underlying massive multiple comparisons problem. △ Less

Submitted 29 December, 2021; originally announced December 2021.

Comments: 32 pages, 12 figures

MSC Class: 62P30

Mutational signatures and transmissibility of SARS-CoV-2 Gamma and Lambda variants

Authors: Karen Y. Oróstica, Sebastian Contreras, Sebastian B. Mohr, Jonas Dehning, Simon Bauer, David Medina-Ortiz, Emil N. Iftekhar, Karen Mujica, Paulo C. Covarrubias, Soledad Ulloa, Andrés E. Castillo, Ricardo A. Verdugo, Jorge Fernández, Álvaro Olivera-Nappa, Viola Priesemann

Abstract: The emergence of SARS-CoV-2 variants of concern endangers the long-term control of COVID-19, especially in countries with limited genomic surveillance. In this work, we explored genomic drivers of contagion in Chile. We sequenced 3443 SARS-CoV-2 genomes collected between January and July 2021, where the Gamma (P.1), Lambda (C.37), Alpha (B.1.1.7), B.1.1.348, and B.1.1 lineages were predominant. Us… ▽ More The emergence of SARS-CoV-2 variants of concern endangers the long-term control of COVID-19, especially in countries with limited genomic surveillance. In this work, we explored genomic drivers of contagion in Chile. We sequenced 3443 SARS-CoV-2 genomes collected between January and July 2021, where the Gamma (P.1), Lambda (C.37), Alpha (B.1.1.7), B.1.1.348, and B.1.1 lineages were predominant. Using a Bayesian model tailored for limited genomic surveillance, we found that Lambda and Gamma variants' reproduction numbers were about 5% and 16% larger than Alpha's, respectively. We observed an overabundance of mutations in the Spike gene, strongly correlated with the variant's transmissibility. Furthermore, the variants' mutational signatures featured a breakpoint concurrent with the beginning of vaccination (mostly CoronaVac, an inactivated virus vaccine), indicating an additional putative selective pressure. Thus, our work provides a reliable method for quantifying novel variants' transmissibility under subsampling (as newly-reported Delta, B.1.617.2) and highlights the importance of continuous genomic surveillance. △ Less

Submitted 23 August, 2021; originally announced August 2021.

Nitrogen-doped graphene based triboelectric nanogenerators

Authors: Giuseppina Pace, Michele Serri, Antonio Esau del Rio Castillo, Alberto Ansaldo, Simone Lauciello, Mirko Prato, Lea Pasquale, Jan Luxa, Vlastimil Mazánek, Zdenek Sofer, Francesco Bonaccorso

Abstract: Harvesting all sources of available clean energy is an essential strategy to contribute to healing current dependence on non-sustainable energy sources. Recently, triboelectric nanogenerators (TENGs) have gained visibility as new mechanical energy harvester offering a valid alternative to batteries, being particularly suitable for portable devices. Here, the increased capacitance of a few-layer gr… ▽ More Harvesting all sources of available clean energy is an essential strategy to contribute to healing current dependence on non-sustainable energy sources. Recently, triboelectric nanogenerators (TENGs) have gained visibility as new mechanical energy harvester offering a valid alternative to batteries, being particularly suitable for portable devices. Here, the increased capacitance of a few-layer graphene-based electrode is obtained by incorporating nitrogen-doped graphene (N_graphene), enabling a 3_fold enhancement in TENGs power output. The dependence of TENGs performance on the electronic properties of different N_graphene types, varying in the do** concentration and in the relative content of N-pyridinic and N-graphitic sites is investigated. These sites have different electron affinities, and synergistically contribute to the variation of the capacitive and resistive properties of N-graphene and consequently, TENG performance. It is demonstrated that the power enhancement of the TENG occurs when the N_graphene, an n-semiconductor, is interfaced between the positive triboelectric material and the electrode, while a deterioration of the electrical performance is observed when it is placed at the interface with the negative triboelectric material. This behavior is explained in terms of the dependence of N_graphene quantum capacitance on the electrode chemical potential which shifts according to the opposite polarization induced at the two electrodes upon triboelectrification. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Journal ref: Nano Energy Volume 87, September 2021, 106173

A Registration-free approach for Statistical Process Control of 3D scanned objects via FEM

Authors: Xueqi Zhao, Enrique del Castillo

Abstract: Recent work in on-line Statistical Process Control (SPC) of manufactured 3-dimensional (3-D) objects has been proposed based on the estimation of the spectrum of the Laplace-Beltrami (LB) operator, a differential operator that encodes the geometrical features of a manifold and is widely used in Machine Learning (i.e., Manifold Learning). The resulting spectra are an intrinsic geometrical feature o… ▽ More Recent work in on-line Statistical Process Control (SPC) of manufactured 3-dimensional (3-D) objects has been proposed based on the estimation of the spectrum of the Laplace-Beltrami (LB) operator, a differential operator that encodes the geometrical features of a manifold and is widely used in Machine Learning (i.e., Manifold Learning). The resulting spectra are an intrinsic geometrical feature of each part, and thus can be compared between parts avoiding the part to part registration (or "part localization") pre-processing or the need for equal size meshes, characteristics which are required in previous approaches for SPC of 3D parts. The recent spectral SPC methods, however, are limited to monitoring surface data from objects such that the scanned meshes have no boundaries, holes, or missing portions. In this paper, we extend spectral methods by first considering a more accurate and general estimator of the LB spectrum that is obtained by application of Finite Element Methods (FEM) to the solution of Helmholtz's equation with boundaries. It is shown how the new spectral FEM approach, while it retains the advantages of not requiring part localization/registration or equal size datasets scanned from each part, it provides more accurate spectrum estimates, which results in faster detection of out of control conditions than earlier methods, can be applied to both mesh or volumetric (solid) scans, and furthermore, it is shown how it can be applied to partial scans that result in open meshes (surface or volumetric) with boundaries, increasing the practical applicability of the methods. The present work brings SPC methods closer to contemporary research in Computer Graphics and Manifold Learning. MATLAB code that reproduces the examples of this paper is provided in the supplementary materials. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Single particle fluctuations dominate the long-time dynamic susceptibility in glass-forming liquids

Authors: Rajib K. Pandit, Elijah Flenner, Horacio E. Castillo

Abstract: Liquids near the glass transition exhibit dynamical heterogeneity, i.e. correlated regions in the liquid relax at either a much faster rate or a much slower rate than the average. This collective phenomenon has been characterized by measurements of a dynamic susceptibility $χ_4(t)$, which are sometimes interpreted in terms of the size of those relaxing regions and the intensity of the fluctuations… ▽ More Liquids near the glass transition exhibit dynamical heterogeneity, i.e. correlated regions in the liquid relax at either a much faster rate or a much slower rate than the average. This collective phenomenon has been characterized by measurements of a dynamic susceptibility $χ_4(t)$, which are sometimes interpreted in terms of the size of those relaxing regions and the intensity of the fluctuations. We show that the results of those measurements can be affected not only by the collective fluctuations in the relaxation rate, but also by density fluctuations in the initial state and by single-particle fluctuations. We also show that at very long times the average overlap $C(t)$ probing the similarity between an initial and a final state separated by a time interval $t$ decays as a power law $C(t) \sim t^{-d/2}$. This is much slower than the stretched exponential behavior $C(t) \sim {\rm e}^{-(t/τ)^β}$ previously observed at times within one or two orders of magnitude of the $α$-relaxation time $τ_α$. We find that for times longer than $10-100 τ_α$, the dynamic susceptibility $χ_4(t)$ is dominated by single particle fluctuations, and that $χ_4(t) \approx C(t) \sim t^{-d/2}$. Finally, we introduce a method to extract the collective relaxation contribution to the dynamic susceptibility $χ_4(t)$ by subtracting the effects of single-particle fluctuations and initial state density fluctuations. We apply this method to numerical simulations of two glass forming models: a binary hard sphere system and a Kob-Andersen Lennard-Jones system. This allows us to extend the analysis of numerical data to timescales much longer than previously possible, and opens the door for further future progress in the study of dynamic heterogeneities, including the determination of the exchange time. △ Less

Submitted 27 December, 2021; v1 submitted 22 December, 2020; originally announced December 2020.

Comments: 8 pages, 9 figures. Contents previously in Supplementary Information now in main text and Appendix A. New appendices B and C added

Journal ref: Phys. Rev. E 105, 014605 (2022)

Anisotropic layer-by-layer carbon nanotubes/boron nitride/rubber composite and its application in electromagnetic shielding

Authors: Yanhu Zhan, Emanuele Lago, Chiara Santillo, Antonio Esau Del Rio Castillo, Shuai Hao, Giovanna G. Buonocore, Zhenming Chen, Hesheng Xia, Marino Lavorgna, Francesco Bonaccorso

Abstract: Multifunctional polymer composites with anisotropic properties are attracting interests as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites are fabricated by combining the layer-by-layer (LBL) filtration method with the alternative assembling of carbon nanotubes (CNTs) and hexagonal boron nitride flakes (hBN) on natural rubber latex particles (… ▽ More Multifunctional polymer composites with anisotropic properties are attracting interests as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites are fabricated by combining the layer-by-layer (LBL) filtration method with the alternative assembling of carbon nanotubes (CNTs) and hexagonal boron nitride flakes (hBN) on natural rubber latex particles (NR). The layered composites exhibit anisotropic thermal and electrical conductivities, which are tailored through the layer formulations. The best composite consists of four layers of NR modified with 8 phr (parts per Hundred Rubber) CNTs (~7.4 wt%) and four alternated layers with 12 phr hBN (~10.7 wt%). The composites exhibit an electromagnetic interference (EMI) shielding effectiveness of 22.41+-0.14 dB mm-1 at 10.3 GHz and a thermal conductivity equal to 0.25 W/(mK). Furthermore, when the layered composite is used as an electrical thermal heater the surface reaches a stable temperature of ~103 C in approx. 2 min, with an input bias of 2.5 V. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Comments: 13 pages, 5 figures

Journal ref: Nanoscale, 2020,12, 7782-7791

Search for ultra-high energy photons through preshower effect with gamma-ray telescopes: Study of CTA-North efficiency

Authors: Kévin Almeida Cheminant, Dariusz Góra, David E. Alvarez Castillo, Aleksander Ćwikła, Niraj Dhital, Alan R. Duffy, Piotr Homola, Konrad Kopański, Marcin Kasztelan, Peter Kovacs, Marta Marek, Alona Mozgova, Vahab Nazari, Michał Niedzźwiecki, Dominik Ostrogórski, Karel Smolek, Jarosław Stasielak, Oleksandr Sushchov, Jilberto Zamora-Saa

Abstract: We study the feasibility of detecting preshower initiated by ultra-high energy photons using Monte-Carlo simulations of nearly horizontal air showers for the example of the La Palma site of the Cherenkov Telescope Array. We investigate the efficiency of multivariate analysis in correctly identifying preshower events initiated by 40 EeV photons and cosmic-ray dominated background simulated in the e… ▽ More We study the feasibility of detecting preshower initiated by ultra-high energy photons using Monte-Carlo simulations of nearly horizontal air showers for the example of the La Palma site of the Cherenkov Telescope Array. We investigate the efficiency of multivariate analysis in correctly identifying preshower events initiated by 40 EeV photons and cosmic-ray dominated background simulated in the energy range 10 TeV -- 10 EeV. The effective areas for such kind of events are also investigated and event rate predictions related to different ultra-high energy photons production models are presented. While the expected number of preshowers from diffuse emission of UHE photon for 30 hours of observation is estimated around $3.3\times10^{-5}$ based on the upper limits put by the Pierre Auger Observatory, this value is at the level of $2.7\times10^{-4}$ ($5.7\times 10^{-5}$) when considering the upper limits of the Pierre Auger Observatory (Telescope Array) on UHE photon point sources. However, UHE photon emission may undergo possible "boosting" due to gamma-ray burst, increasing the expected number of preshower events up to 0.17 and yielding a minimum required flux of $\sim 0.2$ $\mathrm{km^{-2}yr^{-1}}$ to obtain one preshower event, which is about a factor 10 higher than upper limits put by the Pierre Auger Observatory and Telescope Array (0.034 and 0.019 $\mathrm{km^{-2}yr^{-1}}$, respectively). △ Less

Submitted 21 July, 2020; originally announced July 2020.

Comments: 16 pages, 16 figures, 4 tables

Journal ref: Astroparticle Physics 123 (2020) 102489

3D human pose estimation with adaptive receptive fields and dilated temporal convolutions

Authors: Michael Shin, Eduardo Castillo, Irene Font Peradejordi, Shobhna Jayaraman

Abstract: In this work, we demonstrate that receptive fields in 3D pose estimation can be effectively specified using optical flow. We introduce adaptive receptive fields, a simple and effective method to aid receptive field selection in pose estimation models based on optical flow inference. We contrast the performance of a benchmark state-of-the-art model running on fixed receptive fields with their adapt… ▽ More In this work, we demonstrate that receptive fields in 3D pose estimation can be effectively specified using optical flow. We introduce adaptive receptive fields, a simple and effective method to aid receptive field selection in pose estimation models based on optical flow inference. We contrast the performance of a benchmark state-of-the-art model running on fixed receptive fields with their adaptive field counterparts. By using a reduced receptive field, our model can process slow-motion sequences (10x longer) 23% faster than the benchmark model running at regular speed. The reduction in computational cost is achieved while producing a pose prediction accuracy to within 0.36% of the benchmark model. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Flexible Graphene/Carbon Nanotube Electrochemical Double-Layer Capacitors with Ultrahigh Areal Performance

Authors: Valentino Romano, Beatriz Martin-Garcia, Sebastiano Bellani, Luigi Marasco, Jaya Kumar Panda, Reinier Oropesa-Nunez, Leyla Najafi, Antonio Esau Del Rio Castillo, Mirko Prato, Elisa Mantero, Vittorio Pellegrini, Giovanna D Angelo, Francesco Bonaccorso

Abstract: The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume… ▽ More The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume (production rate ~0.5 kg/day). Commercial single/double walled carbon nanotubes (SDWCNTs) are mixed with graphene flakes in order to act as spacers between the graphene flakes during their film formation. The latter is obtained by one-step vacuum filtration, resulting in self-standing, metal- and binder-free flexible EDLC electrodes with high active material mass loadings up to 30 mg cm-2. The corresponding symmetric WJM-G/SDWCNTs EDLCs exhibit electrode energy densities of 539 uWh cm-2 at 1.3 mW cm-2 and operating power densities up to 532 mW cm-2 (outperforming most of the EDLC technologies). The EDCLs show excellent cycling stability and outstanding flexibility even under highly folded states (up to 180 degrees). The combination of industrial-like production of active materials, simplified manufacturing of EDLC electrodes, and ultrahigh areal performance of the as-produced EDLCs are promising for novel advanced EDLC designs. △ Less

Submitted 11 April, 2020; originally announced May 2020.

Journal ref: ChemPlusChem, 2019, 84, 882

The Panacea Threat Intelligence and Active Defense Platform

Authors: Adam Dalton, Ehsan Aghaei, Ehab Al-Shaer, Archna Bhatia, Esteban Castillo, Zhuo Cheng, Sreekar Dhaduvai, Qi Duan, Md Mazharul Islam, Younes Karimi, Amir Masoumzadeh, Brodie Mather, Sashank Santhanam, Samira Shaikh, Tomek Strzalkowski, Bonnie J. Dorr

Abstract: We describe Panacea, a system that supports natural language processing (NLP) components for active defenses against social engineering attacks. We deploy a pipeline of human language technology, including Ask and Framing Detection, Named Entity Recognition, Dialogue Engineering, and Stylometry. Panacea processes modern message formats through a plug-in architecture to accommodate innovative appro… ▽ More We describe Panacea, a system that supports natural language processing (NLP) components for active defenses against social engineering attacks. We deploy a pipeline of human language technology, including Ask and Framing Detection, Named Entity Recognition, Dialogue Engineering, and Stylometry. Panacea processes modern message formats through a plug-in architecture to accommodate innovative approaches for message analysis, knowledge representation and dialogue generation. The novelty of the Panacea system is that uses NLP for cyber defense and engages the attacker using bots to elicit evidence to attribute to the attacker and to waste the attacker's time and resources. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: Accepted at STOC

Single-step exfoliation and functionalization of few-layers black phosphorus and its application for polymer composites

Authors: Antonio Esau Del Rio Castillo, Christian Daniel Reyes, Laura Edith Rojas, Sanjay B. Thorat, Michele Serri, Ana Laura Martinez, Carlos Velasco, Vittorio Pellegrini, Francesco Bonaccorso

Abstract: We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process.… ▽ More We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process. We used the exfoliated and functionalised flakes as fillers in a polymethyl methacrylate matrix to test the mechanical endurance, obtaining an improvement in the Young modulus of 106% compared to the bare polymer. These data support the development of black phosphorus materials as 2D-polymer fillers and performance-enhancers. △ Less

Submitted 21 February, 2020; originally announced February 2020.

A Bivariate Dead Band Process Adjustment Policy

Authors: Enrique del Castillo, Rainer Goeb

Abstract: A bivariate extension to Box and Jenkins (1963) feedback adjustment problem is presented in this paper. The model balances the fixed cost of making an adjustment, which is assumed independent of the magnitude of the adjustments, with the cost of running the process off-target, which is assumed quadratic. It is also assumed that two controllable factors are available to compensate for the deviation… ▽ More A bivariate extension to Box and Jenkins (1963) feedback adjustment problem is presented in this paper. The model balances the fixed cost of making an adjustment, which is assumed independent of the magnitude of the adjustments, with the cost of running the process off-target, which is assumed quadratic. It is also assumed that two controllable factors are available to compensate for the deviations from target of two responses in the presence of a bivariate IMA(1,1) disturbance. The optimal policy has the form of a "dead band", in which adjustments are justified only when the predicted process responses exceed some boundary in $\mathbb{R}^2$. This boundary indicates when the responses are predicted to be far enough from their targets that an additional adjustment or intervention in the process is justified. Although originally developed to control a machine tool, dead band control policies have application in other areas. For example, they could be used to control a disease through the application of a drug to a patient depending on the level of a substance in the body (e.g., diabetes control). This paper presents analytical formulae for the computation of the loss function that combines off-target and adjustment costs per time unit. Expressions are derived for the average adjustment interval and for the scaled mean square deviations from target. The minimization of the loss function and the practical use of the resulting dead band adjustment strategy is illustrated with an application to a semiconductor manufacturing process. △ Less

Submitted 17 December, 2019; originally announced December 2019.

Optimal Design of Experiments on Riemannian Manifolds

Authors: Hang Li, Enrique Del Castillo

Abstract: The theory of optimal design of experiments has been traditionally developed on an Euclidean space. In this paper, new theoretical results and an algorithm for finding the optimal design of an experiment located on a Riemannian manifold are provided. It is shown that analogously to the results in Euclidean spaces, D-optimal and G-optimal designs are equivalent on manifolds, and we provide a lower… ▽ More The theory of optimal design of experiments has been traditionally developed on an Euclidean space. In this paper, new theoretical results and an algorithm for finding the optimal design of an experiment located on a Riemannian manifold are provided. It is shown that analogously to the results in Euclidean spaces, D-optimal and G-optimal designs are equivalent on manifolds, and we provide a lower bound for the maximum prediction variance of the response evaluated over the manifold. In addition, a converging algorithm that finds the optimal experimental design on manifold data is proposed. Numerical experiments demonstrate the importance of considering the manifold structure in a designed experiment when present, and the superiority of the proposed algorithm. △ Less

Submitted 5 February, 2021; v1 submitted 5 November, 2019; originally announced November 2019.

Journal ref: 10.1080/01621459.2022.2146587

CVD-graphene/graphene flakes dual-films as advanced DSSC counter electrodes

Authors: Andrea Capasso, Sebastiano Bellani, Alessandro Lorenzo Palma, Leyla Najafi1, Antonio Esaù Del Rio Castillo, Nicola Curreli1, Lucio Cinà, Vaidotas Miseikis, Camilla Coletti, Giuseppe Calogero, Vittorio Pellegrini, Aldo Di Carlo, Francesco Bonaccorso

Abstract: The use of graphene-based electrodes is burgeoning in a wide range of applications, including solar cells, light emitting diodes, touch screens, field-effect transistors, photodetectors, sensors and energy storage systems. The success of such electrodes strongly depends on the implementation of effective production and processing methods for graphene. In this work, we take advantage of two differe… ▽ More The use of graphene-based electrodes is burgeoning in a wide range of applications, including solar cells, light emitting diodes, touch screens, field-effect transistors, photodetectors, sensors and energy storage systems. The success of such electrodes strongly depends on the implementation of effective production and processing methods for graphene. In this work, we take advantage of two different graphene production methods to design an advanced, conductive oxide- and platinum-free, graphene-based counter electrode for dye-sensitized solar cells (DSSCs). In particular, we exploit the combination of a graphene film, produced by chemical vapor deposition (CVD) (CVD-graphene), with few-layer graphene (FLG) flakes, produced by liquid phase exfoliation. The CVD-graphene is used as charge collector, while the FLG flakes, deposited atop by spray coating, act as catalyst for the reduction of the electrolyte redox couple (i.e., I3-/I-- and Co+2/+3). The as-produced counter electrodes are tested in both I3-/I-- and Co+2/+3-based semitransparent DSSCs, showing power conversion efficiencies of 2.1% and 5.09%, respectively, under 1 SUN illumination. At 0.1 SUN, Co+2/+3-based DSSCs achieve a power conversion efficiency as high as 6.87%. Our results demonstrate that the electrical, optical, chemical and catalytic properties of graphene-based dual films, designed by combining CVD-graphene and FLG flakes, are effective alternatives to FTO/Pt counter electrodes for DSSCs for both outdoor and indoor applications. △ Less

Submitted 31 October, 2019; originally announced October 2019.

Journal ref: 2D Materials, 2019, 6 035007

Public engagement as a scientific tool to implement multi-messenger strategies with the Cosmic-Ray Extremely Distributed Observatory

Authors: Piotr Homola, David E. Alvarez Castillo, Dariusz Góra, Alan R. Duffy, Bohdan Hnatyk, Paweł Jagoda, Marcin Kasztelan, Konrad Kopański, Peter Kovacs, Michał Krupiński, Alona Mozgova, Vahab Nazari, Michal Niedźwiecki, Wojciech Noga, Dominik Ostrogórski, Karel Smolek, Jaroslaw Stasielak, Oleksandr Sushchov, Tadeusz Wibig, Krzysztof W. Woźniak, Jilberto Zamora-Saa

Abstract: The Cosmic-Ray Extremely Distributed Observatory (CREDO) uses the hunt for particle cascades from deep space as a vehicle for a unique "bottom-up" approach to scientific research. By engaging the non-specialist public of all ages as "citizen scientists" we create opportunities for lifelong learning for individuals as well as for cooperation and the sharing of common educational tools amongst insti… ▽ More The Cosmic-Ray Extremely Distributed Observatory (CREDO) uses the hunt for particle cascades from deep space as a vehicle for a unique "bottom-up" approach to scientific research. By engaging the non-specialist public of all ages as "citizen scientists" we create opportunities for lifelong learning for individuals as well as for cooperation and the sharing of common educational tools amongst institutions. The discoveries of these citizen scientists will feed directly into a pioneering new area of scientific research oriented on Cosmic Ray Ensembles (CRE). The detection (or non-detection) of such particle groups promises to open up a new method for exploring our universe, and a new channel on the multi-messenger stage, oriented on both astro- and geo-investigations. The opportunities this would create for cross-disciplinary research are significant and beneficial for individuals, networks of institutions and the global communities of both professional scientists and science enthusiasts. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Comments: 4 pages, 3 figures, Proceedings The New Era of Multi-Messenger Astrophysics - Asterics2019, 25 - 29 March, 2019 Groningen, The Netherlands

Journal ref: PoS(Asterics2019)034

Search for ultra-high energy photons: observing the preshower effect with gamma-ray telescopes

Authors: Kevin Almeida Cheminant, Dariusz Gora, David E. Alvarez Castillo, Niraj Dhital, Piotr Homola, Pawel Jagoda, Konrad Kopanski, Marcin Kasztelan, Peter Kovacs, Marta Marek, Vahab Nazari, Michal Niedzwiecki, Katarzyna Smelcerz, Karel Smolek, Jaroslaw Stasielak, Oleksandr Sushchov, Krzysztof Rzecki, Tadeusz Wibig, Jilberto Zamora-Saa

Abstract: Ultra-high energy photons constitute one of the most important pieces of the astroparticle physics problems. Their observation may provide new insight on several phenomena such as supermassive particle annihilation or the GZK effect. Because of the absence of any significant photon identification by a leading experiments such as the Pierre Auger Observatory, we consider a screening phenomenon call… ▽ More Ultra-high energy photons constitute one of the most important pieces of the astroparticle physics problems. Their observation may provide new insight on several phenomena such as supermassive particle annihilation or the GZK effect. Because of the absence of any significant photon identification by a leading experiments such as the Pierre Auger Observatory, we consider a screening phenomenon called preshower effect which could efficiently affect ultra-high energy photon propagation. This effect is a consequence of photon interactions with the geomagnetic field and results in large electromagnetic cascade of particles several thousands kilometers above the atmosphere. This collection of particles, called cosmic-ray ensembles (CRE), may reach the atmosphere and produce the well-known air showers. In this paper we propose to use gamma-ray telescopes to look for air showers induced by CRE. Possible sources of ultra-high energy photons include the GZK effect and Super Heavy Dark Matter particles. Simulations involving the preshower effect and detectors response are performed and properties of these peculiar air showers are investigated. The use of boosted decision trees to obtain the best cosmic-ray ensemble/hadron separation, the aperture and event rate predictions for a few models of photon production are also presented. △ Less

Submitted 26 August, 2019; v1 submitted 23 August, 2019; originally announced August 2019.

Comments: 8 pages, 3 figures, International Cosmic Ray Conference 2019

Journal ref: PoS(ICRC2019)688

Cosmic Ray Extremely Distributed Observatory: Status and perspectives of a global cosmic ray detection framework

Authors: Dariusz Gora, Kevin Almeida Cheminant, David E. Alvarez Castillo, Dmitriy Beznosko, Niraj Dhital, Alan R. Duffy, Piotr Homola, Konrad Kopanski, Peter Kovacs, Marta Marek, Alona Mozgova, Vahab Nazari, Michal Niedzwiecki, Wojciech Noga, Katarzyna Smelcerz, Karel Smolek, Jaroslaw Stasielak, Oleksandr Sushchov, Dominik Ostrogorski, Krzysztof Rzecki, Krzysztof W. Wozniak, Jilberto Zamora-Saa

Abstract: The Cosmic-Ray Extremely Distributed Observatory (CREDO) is a project dedicated to global studies of extremely extended cosmic-ray phenomena, the cosmic-ray ensembles (CRE), beyond the capabilities of existing detectors and observatories. Up to date cosmic-ray research has been focused on detecting single air showers, while the search for ensembles of cosmic-rays, which may spread over a significa… ▽ More The Cosmic-Ray Extremely Distributed Observatory (CREDO) is a project dedicated to global studies of extremely extended cosmic-ray phenomena, the cosmic-ray ensembles (CRE), beyond the capabilities of existing detectors and observatories. Up to date cosmic-ray research has been focused on detecting single air showers, while the search for ensembles of cosmic-rays, which may spread over a significant fraction of the Earth, is a scientific terra incognita. The key idea of CREDO is to combine existing cosmic-ray detectors (large professional arrays, educational instruments, individual detectors, such as smartphones, etc.) into a worldwide network, thus enabling a global analysis. The second goal of CREDO involves a large number of participants (citizen science!), assuring the geographical spread of the detectors and managing manpower necessary to deal with vast amount of data to search for evidence for cosmic-ray ensembles. In this paper the status and perspectives of the project are presented. △ Less

Submitted 19 August, 2019; v1 submitted 12 August, 2019; originally announced August 2019.

Comments: Proceedings of 36th International Cosmic Ray Conference - ICRC2019 - July 24th - August 1st, 2019 Madison, WI, U.S.A

Report number: PoS(ICRC2019)272

An Intrinsic Geometrical Approach for Statistical Process Control of Surface and Manifold Data

Authors: Xueqi Zhao, Enrique del Castillo

Abstract: We present a new method for statistical process control (SPC) of a discrete part manufacturing system based on intrinsic geometrical properties of the parts, estimated from three-dimensional sensor data. An intrinsic method has the computational advantage of avoiding the difficult part registration problem, necessary in previous SPC approaches of three-dimensional geometrical data, but inadequate… ▽ More We present a new method for statistical process control (SPC) of a discrete part manufacturing system based on intrinsic geometrical properties of the parts, estimated from three-dimensional sensor data. An intrinsic method has the computational advantage of avoiding the difficult part registration problem, necessary in previous SPC approaches of three-dimensional geometrical data, but inadequate if noncontact sensors are used. The approach estimates the spectrum of the Laplace-Beltrami (LB) operator of the scanned parts and uses a multivariate nonparametric control chart for online process control. Our proposal brings SPC closer to computer vision and computer graphics methods aimed to detect large differences in shape (but not in size). However, the SPC problem differs in that small changes in either shape or size of the parts need to be detected, kee** a controllable false alarm rate and without completely filtering noise. An online or "Phase II" method and a scheme for starting up in the absence of prior data ("Phase I") are presented. Comparison with earlier approaches that require registration shows the LB spectrum method to be more sensitive to rapidly detect small changes in shape and size, including the practical case when the sequence of part datasets is in the form of large, unequal size meshes. A post-alarm diagnostic method to investigate the location of defects on the surface of a part is also presented. While we focus in this article on surface (triangulation) data, the methods can also be applied to point cloud and voxel metrology data. △ Less

Submitted 10 July, 2020; v1 submitted 28 June, 2019; originally announced July 2019.

Liquid-phase exfoliated indium-selenide flakes and their application in hydrogen evolution reaction

Authors: Elisa Petroni, Emanuele Lago, Sebastiano Bellani, Danil W. Boukhvalov, Antonio Politano, Bekir Gurbulak, Songul Duman, Mirko Prato, Silvia Gentiluomo, Reinier Oropesa-Nunez, Jaya-Kumar Panda, Peter S. Toth, Antonio Esau Del Rio Castillo, Vittorio Pellegrini, Francesco Bonaccorso

Abstract: Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging fro… ▽ More Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few um, and thicknesses ranging from 1 to 20 nm, with a max population centred at ~ 5 nm, corresponding to 4 Se-In-In-Se quaternary layers. We also show that no formation of further InSe-based compounds (such as In2Se3) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. We highlight the dependence of the InSe flakes morphologies, i.e., surface area and thickness, on the HER performances achieving best efficiencies with small flakes offering predominant edge effects. Our theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 39 pages

Journal ref: Small, Volume 14, Issue 26, June 27, 2018 1800749

Scalable production of graphene inks via wet-jet milling exfoliation for screen-printed micro-supercapacitors

Authors: Sebastiano Bellani, Elisa Petroni, Antonio Esau Del Rio Castillo, Nicola Curreli, Beatriz Martin-Garcia, Reinier Oropesa-Nunez, Mirko Prato, Francesco Bonaccorso

Abstract: The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing meth… ▽ More The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing methods is crucial for the widespread application of MSCs. Here, we report wet-jet milling exfoliation of graphite to scale-up the production of graphene as supercapacitor material. The formulation of aqueous/alcohol-based graphene inks allows metal-free, flexible MSCs to be screen-printed. These MSCs exhibit areal capacitance (Careal) values up to 1.324 mF cm-2 (5.296 mF cm-2 for a single electrode), corresponding to an outstanding volumetric capacitance (Cvol) of 0.490 F cm-3 (1.961 F cm-3 for a single electrode). The screen-printed MSCs can operate up to power density above 20 mW cm-2 at energy density of 0.064 uWh cm-2. The devices exhibit excellent cycling stability over charge-discharge cycling (10000 cycles), bending cycling (100 cycles at bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate-encapsulated MSCs retain their electrochemical properties after a home-laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: Advanced Functional Materials, 2019

WS2-graphite dual-ion battery

Authors: Sebastiano Bellani, Faxing Wang, Gianluca Longoni, Leyla Najafi, Reinier Oropesa-Nunnez, Antonio E. Del Rio Castillo, Mirko Prato, Xiaodong Zhuang, Vittorio Pellegrini, Xinliang Feng, Francesco Bonaccorso

Abstract: A novel WS2-graphite dual-ion battery (DIB) is developed by combining together a conventional graphite cathode and high-capacity few-layer WS2 flakes anode. The WS2 flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows mass production of few-layer WS2 flakes in dispersion, with an exfoliation yield of 100%. The WS2-anodes enable DIBs, based on hexafluorophosphate (PF6-)… ▽ More A novel WS2-graphite dual-ion battery (DIB) is developed by combining together a conventional graphite cathode and high-capacity few-layer WS2 flakes anode. The WS2 flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows mass production of few-layer WS2 flakes in dispersion, with an exfoliation yield of 100%. The WS2-anodes enable DIBs, based on hexafluorophosphate (PF6-) and lithium (Li+) ions, to achieve charge specific capacities of 457, 438, 421, 403, 295 and 169 mAh g-1 at current rates of 0.1, 0.2, 0.3, 0.4, 0.8 and 1.0 A g-1, respectively, outperforming conventional DIBs. The WS2-based DIBs operate in the 0 to 4 V cell voltage range, thus extending the operating voltage window of conventional WS2-based Li-ion batteries (LIBs). These results demonstrate a new route towards the exploitation of WS2, and possibly other transition metal dichalcogenides (TMDs), for the development of next-generation energy storage devices. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: Nano Lett. 2018, 18, 7155-7164

MoS2 Quantum Dot/Graphene Hybrids for Advanced Interface Engineering of CH3NH3PbI3 Perovskite Solar Cell with Efficiency over 20%

Authors: Leyla Najafi, Babak Taheri, Beatriz Martin-Garcia, Sebastiano Bellani, Diego Di Girolamo, Antonio Agresti, Reinier Oropesa-Nunez, Sara Pescetelli, Luigi Vesce, Emanuele Calabro, Mirko Prato, Antonio E. Del Rio Castillo, Aldo Di Carlo, Francesco Bonaccorso

Abstract: Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids betwee… ▽ More Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids between molybdenum disulfide (MoS2) and reduced graphene oxide (RGO) as hole transport layer (HTL) and active buffer layer (ABL) in mesoscopic methylammonium lead iodide (CH3NH3PbI3) perovskite (MAPbI3)-based PSC. We show that zero-dimensional MoS2 quantum dots (MoS2 QDs), derived by liquid phase exfoliated MoS2 flakes, provide both hole-extraction and electron-blocking properties. In fact, on the one hand, intrinsic n-type do**-induced intra-band gap states effectively extract the holes through an electron injection mechanism. On the other hand, quantum confinement effects increase the optical band gap of MoS2 (from 1.4 eV for the flakes to > 3.2 for QDs), raising the minimum energy of its conduction band (from -4.3 eV for the flakes to -2.2 eV for QDs) above the one of conduction band of MAPbI3 (between -3.7 and -4 eV) and hindering electron collection. The van der Waals hybridization of MoS2 QDs with functionalized reduced graphene oxide (f-RGO), obtained by chemical silanization-induced linkage between RGO and (3-mercaptopropyl)trimethoxysilane, is effective to homogenize the deposition of HTLs or ABLs onto the perovskite film, since the two-dimensional (2D) nature of RGO effectively plug the pinholes of the MoS2 QDs films. Our graphene interface engineering (GIE) strategy based on van der Waals MoS2 QD/graphene hybrids enable MAPbI3-based PSCs to achieve PCE up to 20.12% (average PCE of 18.8%). △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: ACS Nano, 2018, 12, 10736-10754

Engineered MoSe2-based heterostructures for efficient electrochemical hydrogen evolution reaction

Authors: Leyla Najafi, Sebastiano Bellani, Reinier Oropesa-Nuñez, Alberto Ansaldo, Mirko Prato, Antonio Esau Del Rio Castillo, Francesco Bonaccorso

Abstract: Two-dimensional transition metal-dichalcogenides are emerging as efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER-electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Here, we tackle the key challenge that is increasing the number o… ▽ More Two-dimensional transition metal-dichalcogenides are emerging as efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER-electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Here, we tackle the key challenge that is increasing the number of electrocatalytic sites by designing and engineering heterostructures composed of single-/few-layer MoSe2 flakes and carbon nanomaterials (graphene or single-wall carbon nanotubes (SWNTs)) produced by solution processing. The electrochemical coupling between the materials that comprise the heterostructure effectively enhances the HER-electrocatalytic activity of the native MoSe2 flakes. The optimization of the mass loading of MoSe2 flakes and their electrode assembly via monolithic heterostructure stacking provided a cathodic current density of 10mAcm-2 at overpotential of 100mV, a Tafel slope of 63mVdec-1 and an exchange current density (j0) of 0.203 Acm-2. In addition, electrode thermal annealing in a hydrogen environment and chemical bathing in n-butyllithium are exploited to texturize the basal planes of the MoSe2 flakes (through Se-vacancies creation) and to achieve in situ semiconducting-to-metallic phase conversion, respectively, thus they activate new HER-electrocatalytic sites. The as-engineered electrodes show a 4.8-fold enhancement of j0 and a decrease in the Tafel slope to 54mVdec-1. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Doped-MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxides hybrid catalysts for pH-universal electrochemical hydrogen evolution reaction

Authors: Leyla Najafi, Sebastiano Bellani, Reinier Oropesa-Nuñez, Alberto Ansaldo, Mirko Prato, Antonio Esau Del Rio Castillo, Francesco Bonaccorso

Abstract: Clean hydrogen production through efficient and cost-effective electrochemical water splitting is highly promising to meeting future global energy demands. The design of Earth-abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments summarize the outcomes needed for practical applications. Here, we repor… ▽ More Clean hydrogen production through efficient and cost-effective electrochemical water splitting is highly promising to meeting future global energy demands. The design of Earth-abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments summarize the outcomes needed for practical applications. Here, we report a non-noble 3d metal Cl-chemical do** of liquid phase exfoliated single/few-layer flakes of MoSe2 for creating MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxide hybrid HER-catalysts. We propose that the electron-transfer from MoSe2 nanoflakes to metal cations and the chlorine complexation-induced both neutralization, as well as the in situ formation of metal oxide-hydr(oxy)oxides on MoSe2 nanoflake's surface, tailor the proton affinity of the derived catalysts, increasing the number and HER-kinetic of their active sites in both acidic and alkaline electrolytes. The electrochemical coupling between the doped-MoSe2 nanoflakes/metal oxide-hydr(oxy)oxide hybrids and single-walled carbon nanotubes heterostructures further accelerates the HER process. Lastly, monolithic stacking of multiple heterostructures is reported as a facile electrode assembly strategy to achieve overpotential for a cathodic current density of 10mAcm-2 of 0.081V and 0.064V in 0.5M H2SO4 and 1M KOH, respectively. This opens up new opportunities to address the current density vs. overpotential requirements targeted in pH-universal H2 production. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Thioethyl-porphyrazine/Nanocarbon Hybrids for Photoinduced Electron Transfer

Authors: Sandra Belviso, Andrea Capas, Ernesto Santoro, Leyla Najafi, Francesco Lelj, Stefano Superchi, Daniele Casarini, Claudio Villani, Davide Spirito, Sebastiano Bellani, Antonio Esau Del Rio Castillo, Francesco Bonaccorso

Abstract: We designed a novel pyrene-substituted thioethyl-porphyrazine (PzPy) and the formation of supramolecular assembly with nanocarbons demonstrating photoinduced electron transfer ability. As revealed by spectroscopic and electrochemical studies, PzPy displays wide spectral absorption in the visible range, charge separation upon photoexcitation, as well as bandgap and highest occupied/lowest unoccupie… ▽ More We designed a novel pyrene-substituted thioethyl-porphyrazine (PzPy) and the formation of supramolecular assembly with nanocarbons demonstrating photoinduced electron transfer ability. As revealed by spectroscopic and electrochemical studies, PzPy displays wide spectral absorption in the visible range, charge separation upon photoexcitation, as well as bandgap and highest occupied/lowest unoccupied molecular orbital (HOMO/LUMO) energy values, matching the key requirements of organic optoelectronic. Moreover, the presence of a pyrene moiety promotes attractive interactions with pi-conjugated systems. In particular, theoretical calculations show that in the PzPy the HOMO and LUMO are localized on different positions of the molecule, i.e., the HOMO on the pyrene moiety and the LUMO on the macrocycle. Therefore, HOMO-LUMO excitation gives rise to a charge separation, preventing excitons recombination. Two kinds of non-covalent hybrid composites are prepared by mixing the PzPy with single wall carbon nanotubes (SWNTs) and graphene nanoflakes (GNFs), respectively, and used for photocurrent generation through charge transfer processes between PzPy and nanocarbons. Photoconduction experiments show photocurrent generation upon visible light irradiation of both PzPy/SWNT and PzPy/GNF composites (0.78 and 0.71 mA/W at 500 nm, respectively), demonstrating their suitability for optoelectronic applications and light harvesting systems. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 43 pages

Journal ref: Advanced Functional Materials, Volume 28, Issue 21 May 24, 2018, 1705418

Biotransformation and biological impact of graphene and graphene oxide during simulated oral ingestion

Authors: Daniela Guarnieri, Paola Sanchez-Moreno, Antonio Esau Del Rio Castillo, Francesco Bonaccorso, Francesca Gatto, Giuseppe Bardi, Cristina Martin, Ester Vazquez, Tiziano Catelani, Stefania Sabella, Pier Paolo Pompa

Abstract: Graphene is an innovative nanomaterial, made of two-dimensional honeycomb-like carbon lattice, with potential in many different applications. Studying the behaviour of graphene-related materials (GRMs) in biological systems is, therefore, crucial to assess possible side effects. In this work is studied the biotransformation and biological impact of few-layer pristine graphene (FLG) and graphene ox… ▽ More Graphene is an innovative nanomaterial, made of two-dimensional honeycomb-like carbon lattice, with potential in many different applications. Studying the behaviour of graphene-related materials (GRMs) in biological systems is, therefore, crucial to assess possible side effects. In this work is studied the biotransformation and biological impact of few-layer pristine graphene (FLG) and graphene oxide (GOX), following ingestion as exposure route. To mimic FLG and GOX ingestion, an in vitro digestion assay based on a standardized operating procedure (SOP) is applied. The assay simulates the human ingestion of GRMs during their dynamic passage through the different environments of gastrointestinal (GI) tract (salivary, gastric, intestinal). Physical-chemical changes of GRMs during the digestion process are assessed through a detailed Raman spectroscopy characterization. Moreover, the effect of chronic exposure to digested GRMs on integrity and functionality of an in vitro model of intestinal barrier is also determined according to a second SOP. Our results showed that the FLG and GOX nanoflakes aggregates after experiencing the passage through the different environments of GI tract, with evident do** effects, due to the interaction of GRMs with digestive juice components and the strong pH variations. Interestingly, neither structural changes nor degradation of the nanomaterials is observed, suggesting that GRMs are bio-persistent nanomaterials when administered by oral route. Chronic exposure to digested GRMs does not affect intestinal barrier integrity and is not associated to inflammation and cytotoxicity, though possible long-term adverse effects cannot be ruled out, due to the observed bio-durability of the materials. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 32 pages, 8 figures, research paper

Journal ref: Small, Volume 14, Issue 24, June 14, 2018. 1800227

Detection of Cosmic-Ray Ensembles with CREDO

Authors: Krzysztof W. Woźniak, Kevin Almeida-Cheminant, Łukasz Bratek, David Edwin Alvarez Castillo, Niraj Dhital, Alan R. Duffy, Dariusz Góra, Bohdan Hnatyk, Piotr Homola, Paweł Jagoda, Joanna Jałocha-Bratek, Marcin Kasztelan, Dawid Lemański, Peter Kovács, Vahab Nazari, Michał Niedźwiecki, Katarzyna Smelcerz, Karel Smolek, Jarosław Stasielak, Sławomir Stuglik, Oleksandr Sushchov, Jilberto Zamora-Saá

Abstract: One of the main objectives of cosmic-ray studies are precise measurements of energy and chemical composition of particles with extreme energies. Large and sophisticated detectors are used to find events seen as showers starting in the Earth's atmosphere with recorded energies larger than 100 EeV. However, a Cosmic-Ray Ensemble (CRE) develo** before reaching the Earth as a bunch of correlated par… ▽ More One of the main objectives of cosmic-ray studies are precise measurements of energy and chemical composition of particles with extreme energies. Large and sophisticated detectors are used to find events seen as showers starting in the Earth's atmosphere with recorded energies larger than 100 EeV. However, a Cosmic-Ray Ensemble (CRE) develo** before reaching the Earth as a bunch of correlated particles may spread over larger areas and requires an extended set of detectors to be discovered. The Cosmic-Ray Extremely Distributed Observatory (CREDO) is a solution to find such phenomena. Even simple detectors measuring the particle arrival time only are useful in this approach, as they are sufficient both to provide candidate CRE events and to determine the direction from which they are arriving. △ Less

Submitted 26 November, 2018; originally announced November 2018.

Comments: 20th International Symposium on Very High Energy Cosmic Ray Interactions, May 21-15, 2018, Nagoya, Japan

Micro-arcsecond structure of Sagittarius A* revealed by high-sensitivity 86 GHz VLBI observations

Authors: Christiaan D. Brinkerink, Cornelia Müller, Heino D. Falcke, Sara Issaoun, Kazunori Akiyama, Geoffrey C. Bower, Thomas P. Krichbaum, Adam T. Deller, Edgar Castillo, Sheperd S. Doeleman, Raquel Fraga-Encinas, Ciriaco Goddi, Antonio Hernández-Gómez, David H. Hughes, Michael Kramer, Jonathan Léon-Tavares, Laurent Loinard, Alfredo Montaña, Monika Mościbrodzka, Gisela N. Ortiz-León, David Sanchez-Arguelles, Remo P. J. Tilanus, Grant W. Wilson, J. Anton Zensus

Abstract: The compact radio source Sagittarius~A$^*$ (Sgr~A$^*$)in the Galactic Center is the primary supermassive black hole candidate. General relativistic magnetohydrodynamical (GRMHD) simulations of the accretion flow around Sgr\,A$^*$ predict the presence of sub-structure at observing wavelengths of $\sim 3$\,mm and below (frequencies of 86\,GHz and above). For very long baseline interferometry (VLBI)… ▽ More The compact radio source Sagittarius~A$^*$ (Sgr~A$^*$)in the Galactic Center is the primary supermassive black hole candidate. General relativistic magnetohydrodynamical (GRMHD) simulations of the accretion flow around Sgr\,A$^*$ predict the presence of sub-structure at observing wavelengths of $\sim 3$\,mm and below (frequencies of 86\,GHz and above). For very long baseline interferometry (VLBI) observations of Sgr\,A$^*$ at this frequency the blurring effect of interstellar scattering becomes subdominant, and arrays such as the High Sensitivity Array (HSA) and the global mm-VLBI Array (GMVA) are now capable of resolving potential sub-structure in the source. Such investigations improve our understanding of the emission geometry of the mm-wave emission of Sgr\,A$^*$, which is crucial for constraining theoretical models and for providing a background to interpret 1\,mm VLBI data from the Event Horizon Telescope (EHT). We performed high-sensitivity very long baseline interferometry (VLBI) observations of Sgr\,A$^*$ at 3\,mm using the Very Long Baseline Array (VLBA) and the Large Millimeter Telescope (LMT) in Mexico on two consecutive days in May 2015, with the second epoch including the Green Bank Telescope (GBT). We find an overall source geometry that matches previous findings very closely, showing a deviation in fitted model parameters less than 3\% over a time scale of weeks and suggesting a highly stable global source geometry over time. The reported sub-structure in the 3\,mm emission of Sgr\,A$^*$ is consistent with theoretical expectations of refractive noise on long baselines. However, comparing our findings with recent results from 1\,mm and 7\,mm VLBI observations, which also show evidence for east-west asymmetry, an intrinsic origin cannot be excluded. Confirmation of persistent intrinsic substructure will require further VLBI observations spread out over multiple epochs. △ Less

Submitted 20 November, 2018; originally announced November 2018.

Comments: Accepted for publication in A&A

Journal ref: A&A 621, A119 (2019)

Deriving ventilation imaging from 4DCT by deep convolutional neural network

Authors: Yuncheng Zhong, Yevgeniy Vinogradskiy, Liyuan Chen, Nick Myziuk, Richard Castillo, Edward Castillo, Thomas Guerrero, Steve Jiang, **g Wang

Abstract: Purpose: Functional imaging is emerging as an important tool for lung cancer treatment planning and evaluation. Compared with traditional methods such as nuclear medicine ventilation-perfusion (VQ), positron emission tomography (PET), single photon emission computer tomography (SPECT), or magnetic resonance imaging (MRI), which use contrast agents to form 2D or 3D functional images, ventilation im… ▽ More Purpose: Functional imaging is emerging as an important tool for lung cancer treatment planning and evaluation. Compared with traditional methods such as nuclear medicine ventilation-perfusion (VQ), positron emission tomography (PET), single photon emission computer tomography (SPECT), or magnetic resonance imaging (MRI), which use contrast agents to form 2D or 3D functional images, ventilation imaging obtained from 4DCT lung images is convenient and cost-effective because of its availability during radiation treatment planning. Current methods of obtaining ventilation images from 4DCT lung images involve deformable image registration (DIR) and a density (HU) change-based algorithm (DIR/HU); therefore the resulting ventilation images are sensitive to the selection of DIR algorithms. Methods: We propose a deep convolutional neural network (CNN)-based method to derive the ventilation images from 4DCT directly without explicit DIR, thereby improving consistency and accuracy of ventilation images. A total of 82 sets of 4DCT and ventilation images from patients with lung cancer were studied using this method. Results: The predicted images were comparable to the label images of the test data. The similarity index and correlation coefficient averaged over the ten-fold cross validation were 0.883+-0.034 and 0.878+-0.028, respectively. Conclusions: The results demonstrate that deep CNN can generate ventilation imaging from 4DCT without explicit deformable image registration, reducing the associated uncertainty. △ Less

Submitted 21 August, 2018; originally announced August 2018.

Exfoliation of Few-Layer Black Phosphorus in Low-Boiling-Point Solvents and Its Application in Li-Ion Batteries

Authors: Antonio Esau Del Rio Castillo, Vittorio Pellegrini, Haiyan Sun, Joka Buha, Duc Anh Dinh, Emanuele Lago, Alberto Ansaldo, Andrea Capasso, Liberato Manna, Francesco Bonaccorso

Abstract: The liquid-phase exfoliation (LPE) of black phosphorus (BP) is a strategic route for the large-scale production of phosphorene and few-layer BP (FL-BP) flakes. The exploitation of this exfoliated material in cutting-edge technologies, e.g., in flexible electronics and energy storage, is however limited by the fact that the LPE of BP is usually carried out at a high boiling point and in toxic solve… ▽ More The liquid-phase exfoliation (LPE) of black phosphorus (BP) is a strategic route for the large-scale production of phosphorene and few-layer BP (FL-BP) flakes. The exploitation of this exfoliated material in cutting-edge technologies, e.g., in flexible electronics and energy storage, is however limited by the fact that the LPE of BP is usually carried out at a high boiling point and in toxic solvents. In fact, the solvent residual is detrimental to device performance in real applications; thus, complete solvent removal is critical. Here, we tackle these issues by exfoliating BP in different low boiling-point solvents. Among these solvents, we find that acetone also provides a high concentration of exfoliated BP, leading to the production of FL-BP flakes with an average lateral size and thickness of c.a. 30 and 7 nm, respectively. The use of acetone to produce less defective few-layer BP flakes (FL-BPacetone) from bulk crystals is a straightforward process which enables the rapid preparation of homogeneous thin films thanks to the fast solvent evaporation. The ratio of edge to bulk atoms for the BP flakes here produced, combined with the use of low-boiling-point solvents for the exfoliation process suggests that these thin films are promising anodes for lithium-ion batteries. To this end, we tested Li-ion half cells with FL-BPacetone anodes achieving a reversible specific capacity of 480 mAh/g at a current density of 100 mA/g, over 100 charge/discharge cycles. Moreover, a reversible specific capacity of 345 mAh/g is achieved for the FL-BPacetone-based anode at a high current density (i.e., 1 A/g). These findings indicate that the FL-BPacetone-based battery is promising with regards to the design of fast charge/discharge devices. Overall, the presented process is a step forward toward the fabrication of phosphorene-based devices. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Comments: 30 pages, 11 images

Solution-processed hybrid graphene flake/2H-MoS2 quantum dot heterostructures for efficient electrochemical hydrogen evolution

Authors: Leyla Najafi, Sebastiano Bellani, Beatriz Martin-Garcia, Reinier Oropesa-Nunez, Antonio Esau Del Rio Castillo, Mirko Prato, Iwan Moreels, Francesco Bonaccorso

Abstract: We designed solution-processed, flexible hybrid graphene flake/2H-MoS2 quantum dot (QD) heterostructures, showing enhanced electrocatalytic activity for the hydrogen evolution reaction (HER) with respect to their native individual components. The 2H-MoS2 QDs are produced through a scalable, environmentally friendly, one-step solvothermal approach from two-dimensional (2D) 2H-MoS2 flakes obtained b… ▽ More We designed solution-processed, flexible hybrid graphene flake/2H-MoS2 quantum dot (QD) heterostructures, showing enhanced electrocatalytic activity for the hydrogen evolution reaction (HER) with respect to their native individual components. The 2H-MoS2 QDs are produced through a scalable, environmentally friendly, one-step solvothermal approach from two-dimensional (2D) 2H-MoS2 flakes obtained by liquid phase exfoliation (LPE) of their bulk counterpart in 2-Propanol. This QDs synthesis avoids the use of high boiling point and/or toxic solvents. Graphene flakes are produced by LPE of graphite in N-Methyl-2-pyrrolidone. The electrochemical properties of 2H-MoS2 QDs and their HER-favorable chemical and electronic coupling with graphene enable to reach a current density of 10 mA/cm^2 at an overpotential of 136 mV, surpassing the performances of graphene flake/2H-MoS2 (1T-MoS2) flake heterostructures. Our approach provides a shortcut, viable and cost-effective method for enhancing the 2D materials electrocatalytic properties. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Comments: 31 pages, 15 figures

Few-layer MoS2 flakes as hole-selective layer for solution-processed hybrid organic hydrogen-evolving photocathodes

Authors: Sebastiano Bellani, Leyla Najafi, Antonio Esau Del Rio Castillo, Andrea Capasso, Maria Rosa Antognazza, Francesco Bonaccorso

Abstract: High-efficiency organic photocathodes, based on regioregular poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (rr-P3HT:PCBM) bulk heterojunction sandwiched between charge-selective layers, are emerging as efficient and low-cost devices for solar hydrogen production by water splitting. Nevertheless, stability issues of the materials used as charge-selective layers are hampering the r… ▽ More High-efficiency organic photocathodes, based on regioregular poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (rr-P3HT:PCBM) bulk heterojunction sandwiched between charge-selective layers, are emerging as efficient and low-cost devices for solar hydrogen production by water splitting. Nevertheless, stability issues of the materials used as charge-selective layers are hampering the realization of long-lasting photoelectrodes, pointing out the need to investigate novel and stable materials. Here, we propose MoS2 nano-flakes, produced by Li-aided exfoliation of bulk counterpart, as efficient atomic-thick hole-selective layer for rr-P3HT:PCBM-based photocathodes. We carried out a p-type chemical do** to tune on-demand the MoS2 Fermi level in order to match the highest occupied molecular orbital level of the rr-P3HT, thus easing the hole collection at the electrode. The as-prepared p-doped MoS2-based photocathodes reached a photocurrent of 1.21 mA cm-2 at 0 V vs. RHE, a positive onset potential of 0.56 V vs. RHE and a power-saved figure of merit of 0.43%, showing a 6.1-fold increase with respect to pristine MoS2-based photocathodes, under simulated 1 Sun illumination. Operational activity of the photocathodes over time and under 1 Sun illumination revealed a progressive stabilization of the photocurrents at 0.49 mA cm-2 at 0 V vs. RHE. These results pave the way towards the exploitation of layered crystals as efficiency-boosters for scalable hybrid organic H2-evolving photoelectrochemical cells. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Comments: 33 pages, 16 figures

Journal ref: J. Mater. Chem. A, 2017,5, 4384-4396

Ultralow friction of ink-jet printed graphene flakes

Authors: R. Buzio, A. Gerbi, S. Uttiya, C. Bernini, A. E. Del Rio Castillo, F. Palazon, A. S. Siri, V. Pellegrini, L. Pellegrino, F. Bonaccorso

Abstract: We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies in… ▽ More We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies indicate reduced surface contamination by solvents after a vacuum annealing procedure. Notably, the printed FLG flakes show ultralow friction comparable with micromechanically exfoliated graphene flakes. Lubricity is retained on flakes with lateral size of a few tens of nanometres, and with thickness as small as ~ 2 nm, confirming the high crystalline quality and low defects density in the FLG basal plane. Surface exposed step edges exhibit the highest friction values, representing preferential sites for originating secondary dissipative processes related to edge straining, wear or lateral displacement of the flakes. Our work demonstrates that LPE enables fundamental studies on graphene friction to the single-flake level. The capability to deliver ultralow-friction-graphene over technologically relevant substrates, using a scalable production route and a high-throughput, large-area printing technique, may also open up new opportunities in the lubrication of micro- and nano-electromechanical systems. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Comments: 31 pages, 18 figures,

Journal ref: Nanoscale, 2017,9, 7612-7624

Graphene-Based Hole Selective Layers for High-Efficiency, Solution-Processed, Large-Area, Flexible, Hydrogen-Evolving Organic Photocathodes

Authors: Sebastiano Bellani, Leyla Najafi, Beatriz Martín-García, Alebrto Ansaldo, Antonio Esau Del Rio Castillo, Mirko Prato, Iwan Moreels, Francesco Bonaccorso

Abstract: Regio-regular poly(3-hexylthiophene-2,5-diyl) (rr-P3HT), the work-horse of organic photovoltaics, has been recently exploited in bulk heterojunction (BHJ) configuration with phenyl-C61-butyric acid methyl ester (PCBM) for solution-processed hydrogen-evolving photocathodes, reaching cathodic photocurrents at 0 V vs. RHE (J0V vs RHE) of up to 8 mA cm-2. The photoelectrochemical performance of these… ▽ More Regio-regular poly(3-hexylthiophene-2,5-diyl) (rr-P3HT), the work-horse of organic photovoltaics, has been recently exploited in bulk heterojunction (BHJ) configuration with phenyl-C61-butyric acid methyl ester (PCBM) for solution-processed hydrogen-evolving photocathodes, reaching cathodic photocurrents at 0 V vs. RHE (J0V vs RHE) of up to 8 mA cm-2. The photoelectrochemical performance of these photocathodes strongly depends on the presence of the electron (ESL) and hole (HSL) selective layer. While TiO2 and its sub-stoichiometric phases are consolidated ESL materials, the currently used HSLs (e.g., MoO3, CuI, PEDOTT:PSS, WO3) suffer electrochemical degradation under hydrogen evolution reaction (HER)-working conditions. In this work, we use solution-processed graphene derivatives as HSL to boost efficiency and durability of rr-P3HT:PCBM-based photocathodes, demonstrating record-high performance. In fact, our devices show cathodic J0V vs RHE of 6.01 mA cm-2, onset potential (Vo) of 0.6 V vs. RHE, ratiometric power-saved efficiency (φsaved) of 1.11% and operational activity of 20 hours in 0.5 M H2SO4 solution. Moreover, the designed photocathodes are effectively working in different pH environments ranging from acid to basic. This is pivotal for their exploitation in tandem configurations, where photoanodes operate only in restricted electrochemical conditions. Furthermore, we demonstrate the scalability of our all-solution processed approach by fabricating a large-area (~9 cm2) photocathode on flexible substrate, achieving remarkable cathodic J0V vs RHE of 2.8 mA cm-2, Vo of 0.45 V vs. RHE and φsaved of 0.31%. This is the first demonstration of high-efficient rr-P3HT:PCBM flexible photocathodes based on low-cost and solution-processed manufacturing techniques. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Journal ref: J. Phys. Chem. C, 2017, 121 (40), pp 21887-21903

High-yield production of 2D crystals by wet-jet milling

Authors: Antonio Esau Del Rio Castillo, Vittorio Pellegrini, Alberto Ansaldo, Filiberto Ricciardella, Haiyan Sun, Luigi Marasco, Joka Buha, Zhiya Dang, Luca Gagliani, Emanuele Lago, Nicola Curreli, Silvia Gentiluomo, Francisco Palazon, Peter Toth, Elisa Mantero, Manuel Crugliano, Andrea Gamucci, Andrea Tomadin, Marco Polini, Francesco Bonaccorso

Abstract: Efficient and scalable production of two-dimensional (2D) materials is required to overcome technological hurdles towards the creation of a 2D-materials-based industry. Here, we present a novel approach developed for the exfoliation of layered crystals, i.e., graphite, hexagonal boron nitride and transition metal dichalcogenides. The process is based on high-pressure wet-jet-milling (WJM), resulti… ▽ More Efficient and scalable production of two-dimensional (2D) materials is required to overcome technological hurdles towards the creation of a 2D-materials-based industry. Here, we present a novel approach developed for the exfoliation of layered crystals, i.e., graphite, hexagonal boron nitride and transition metal dichalcogenides. The process is based on high-pressure wet-jet-milling (WJM), resulting in 2 L/hr production of 10 g/L of single- and few-layer 2D crystal flakes in dispersion making the scaling-up more affordable. The WJM process enables the production of defect-free and high-quality 2D-crystal dispersions on a large scale, opening the way for the full exploitation in different commercial applications, e.g., anodes active material in lithium ion batteries, reinforcement in polymer-graphene composites, and transparent conductors as we demonstrate in this report. △ Less

Submitted 27 April, 2018; originally announced April 2018.

Comments: 30 pages, 15 figures

A social Network Analysis of the Operations Research/Industrial Engineering Faculty Hiring Network

Authors: Enrique del Castillo, Adam Meyers, Peng Chen

Abstract: We study the U.S. Operations Research/Industrial-Systems Engineering (ORIE) faculty hiring network, consisting of 1,179 faculty origin and destination data together with attribute data from 83 ORIE departments. A social network analysis of faculty hires can reveal important patterns in an academic field, such as the existence of a hierarchy or sociological aspects such as the presence of communiti… ▽ More We study the U.S. Operations Research/Industrial-Systems Engineering (ORIE) faculty hiring network, consisting of 1,179 faculty origin and destination data together with attribute data from 83 ORIE departments. A social network analysis of faculty hires can reveal important patterns in an academic field, such as the existence of a hierarchy or sociological aspects such as the presence of communities of departments. We first statistically test for the existence of a linear hierarchy in the network and for its steepness. We find a near linear hierarchical order of the departments, proposing a new index for hiring networks, which we contrast with other indicators of hierarchy, including published rankings. A single index is not capable to capture the full structure of a complex network, however, so we next fit a latent exponential random graph model (ERGM) to the network, which is able to reproduce its main observed characteristics: high incidence of self-hiring, skewed out-degree distribution, low density and clustering. Finally, we use the latent variables in the ERGM to simplify the network to one where faculty hires take place among three groups of departments. We contrast our findings with those reported for other related disciplines, Computer Science and Business. △ Less

Submitted 8 March, 2018; v1 submitted 28 February, 2018; originally announced March 2018.

Constraints On Dark Energy Models From Galaxy Clusters and Gravitational Lensing Data

Authors: Alexander Bonilla, Jairo E. Castillo

Abstract: The Sunyaev--Zel'dovich (SZ) effect is a global distortion of the Cosmic Microwave Background (CMB) spectrum as a result of its interaction with a hot electron plasma in the intracluster medium of large structures gravitationally viralized such as galaxy clusters (GC). Furthermore, this~hot gas of electrons emits X-rays due to its fall in the gravitational potential well of the GC. The~analysis of… ▽ More The Sunyaev--Zel'dovich (SZ) effect is a global distortion of the Cosmic Microwave Background (CMB) spectrum as a result of its interaction with a hot electron plasma in the intracluster medium of large structures gravitationally viralized such as galaxy clusters (GC). Furthermore, this~hot gas of electrons emits X-rays due to its fall in the gravitational potential well of the GC. The~analysis of SZ and X-ray data provides a method for calculating distances to GC at high redshifts. On the other hand, many galaxies and GC produce a Strong Gravitational Lens (SGL) effect, which has become a useful astrophysical tool for cosmology. We use these cosmological tests in addition to more traditional ones to constrain some alternative dark energy (DE) models, including the study of the history of cosmological expansion through the cosmographic parameters. Using Akaike and Bayesian Information Criterion, we find that the $wCDM$ and $ΛCDM$ models are the most favoured by the observational data. In addition, we found at low redshift a peculiar behavior of slowdown of the universe, which occurs in dynamical DE models when we use data from GC. △ Less

Submitted 23 January, 2018; v1 submitted 25 November, 2017; originally announced November 2017.

Comments: 21 page, 5 figures, 8 tables. Published: 22 January 2018, Universe, MDPI, Special Issue "Progress in Cosmology in the Centenary of the 1917 Einstein Paper"

Journal ref: UNIVERSE, MDPI, Special Issue "Progress in Cosmology in the Centenary of the 1917 Einstein Paper"

Efficient image deployment in cloud environments

Authors: Álvaro López García, Enol Fernández del Castillo

Abstract: The biggest overhead for the instantiation of a virtual machine in a cloud infrastructure is the time spent in transferring the image of the virtual machine into the physical node that executes it. This overhead becomes larger for requests composed of several virtual machines to be started concurrently, and the illusion of flexibility and elasticity usually associated with the cloud computing mode… ▽ More The biggest overhead for the instantiation of a virtual machine in a cloud infrastructure is the time spent in transferring the image of the virtual machine into the physical node that executes it. This overhead becomes larger for requests composed of several virtual machines to be started concurrently, and the illusion of flexibility and elasticity usually associated with the cloud computing model may vanish. This poses a problem for both the resource providers and the software developers, since tackling those overheads is not a trivial issue. In this work we implement and evaluate several improvements for virtual machine image distribution problem in a cloud infrastructure and propose a method based on BitTorrent and local caching of the virtual machine images that reduces the transfer time when large requests are made △ Less

Submitted 21 November, 2017; originally announced November 2017.

Journal ref: Journal of Network and Computer Applications, Volume 63, 2016, Pages 140-149

Standards for enabling heterogeneous IaaS cloud federations

Authors: Álvaro López García, Enol Fernández del Castillo, Pablo Orviz Fernández

Abstract: Technology market is continuing a rapid growth phase where different resource providers and Cloud Management Frameworks are positioning to provide ad-hoc solutions -in terms of management interfaces, information discovery or billing- trying to differentiate from competitors but that as a result remain incompatible between them when addressing more complex scenarios like federated clouds. Gras**… ▽ More Technology market is continuing a rapid growth phase where different resource providers and Cloud Management Frameworks are positioning to provide ad-hoc solutions -in terms of management interfaces, information discovery or billing- trying to differentiate from competitors but that as a result remain incompatible between them when addressing more complex scenarios like federated clouds. Gras** interoperability problems present in current infrastructures is then a must-do, tackled by studying how existing and emerging standards could enhance user experience in the cloud ecosystem. In this paper we will review the current open challenges in Infrastructure as a Service cloud interoperability and federation, as well as point to the potential standards that should alleviate these problems. △ Less

Submitted 21 November, 2017; originally announced November 2017.

Journal ref: Computer Standards & Interfaces, Volume 47, 2016, Pages 19-23,

Slow and Long-ranged Dynamical Heterogeneities in Dissipative Fluids

Authors: Karina E. Avila, Horacio E. Castillo, Katharina Vollmayr-Lee, Annette Zippelius

Abstract: A two-dimensional bidisperse granular fluid is shown to exhibit pronounced long-ranged dynamical heterogeneities as dynamical arrest is approached. Here we focus on the most direct approach to study these heterogeneities: we identify clusters of slow particles and determine their size, $N_c$, and their radius of gyration, $R_G$. We show that $N_c\propto R_G^{d_f}$, providing direct evidence that t… ▽ More A two-dimensional bidisperse granular fluid is shown to exhibit pronounced long-ranged dynamical heterogeneities as dynamical arrest is approached. Here we focus on the most direct approach to study these heterogeneities: we identify clusters of slow particles and determine their size, $N_c$, and their radius of gyration, $R_G$. We show that $N_c\propto R_G^{d_f}$, providing direct evidence that the most immobile particles arrange in fractal objects with a fractal dimension, $d_f$, that is observed to increase with packing fraction $φ$. The cluster size distribution obeys scaling, approaching an algebraic decay in the limit of structural arrest, i.e., $φ\toφ_c$. Alternatively, dynamical heterogeneities are analyzed via the four-point structure factor $S_4(q,t)$ and the dynamical susceptibility $χ_4(t)$. $S_4(q,t)$ is shown to obey scaling in the full range of packing fractions, $0.6\leqφ\leq 0.805$, and to become increasingly long-ranged as $φ\toφ_c$. Finite size scaling of $χ_4(t)$ provides a consistency check for the previously analyzed divergences of $χ_4(t)\propto (φ-φ_c)^{-γ_χ}$ and the correlation length $ξ\propto (φ-φ_c)^{-γ_ξ}$. We check the robustness of our results with respect to our definition of mobility. The divergences and the scaling for $φ\toφ_c$ suggest a non-equilibrium glass transition which seems qualitatively independent of the coefficient of restitution. △ Less

Submitted 25 October, 2017; originally announced October 2017.

Comments: 14 pages, 25 figures

Journal ref: Soft Matter, 2016,12, 5461-5474

Characterization of cortical motor function and imagery-related cortical activity: Potential application for prehabilitation

Authors: Milena Korostenskaja, Christoph Kapeller, Ki H Lee, Christoph Guger, James Baumgartner, Eduardo M. Castillo

Abstract: To minimize functional morbidity associated with brain surgery, new preventive approaches (also referred to as "prehabilitation") by using motor-imagery-based computer interfaces (MI-BCIs) can be utilized. To achieve successful MI-BCI performance for prehabilitation purposes, the characteristics of an electrocorticographic (ECoG) signal that is associated with overt motor function ("real movement"… ▽ More To minimize functional morbidity associated with brain surgery, new preventive approaches (also referred to as "prehabilitation") by using motor-imagery-based computer interfaces (MI-BCIs) can be utilized. To achieve successful MI-BCI performance for prehabilitation purposes, the characteristics of an electrocorticographic (ECoG) signal that is associated with overt motor function ("real movement" - RM) versus covert motor function ("motor imagery" - MI) need to be determined. In our current study, 5 patients with pharmacoresistant epilepsy (2 males, average age 25 years, SD 15), undergoing evaluation for epilepsy surgery participated in both RM and MI tasks. Although the RM- and MI- related ECoG changes had some common features, they also differed in a number of ways, such as location, frequency ranges, signal synchronization and desynchronization. These similarities and differences are discussed in a view of other neuroimaging studies, including magnetoencephalography (MEG) and functional magnetic resonance imaging (fMRI). We emphasize the need for inclusion of a broad spectrum of frequencies in ECoG analysis, when RM- and MI- related activities are concerned. △ Less

Submitted 1 August, 2017; originally announced August 2017.

Comments: 6 pages, 3 figures; IEEE SMC 2017: IEEE International Conference on Systems, Man, and Cybernetics