Showing 1–22 of 22 results for author: Castillo, A E

Mutational signatures and transmissibility of SARS-CoV-2 Gamma and Lambda variants

Authors: Karen Y. Oróstica, Sebastian Contreras, Sebastian B. Mohr, Jonas Dehning, Simon Bauer, David Medina-Ortiz, Emil N. Iftekhar, Karen Mujica, Paulo C. Covarrubias, Soledad Ulloa, Andrés E. Castillo, Ricardo A. Verdugo, Jorge Fernández, Álvaro Olivera-Nappa, Viola Priesemann

Abstract: The emergence of SARS-CoV-2 variants of concern endangers the long-term control of COVID-19, especially in countries with limited genomic surveillance. In this work, we explored genomic drivers of contagion in Chile. We sequenced 3443 SARS-CoV-2 genomes collected between January and July 2021, where the Gamma (P.1), Lambda (C.37), Alpha (B.1.1.7), B.1.1.348, and B.1.1 lineages were predominant. Us… ▽ More The emergence of SARS-CoV-2 variants of concern endangers the long-term control of COVID-19, especially in countries with limited genomic surveillance. In this work, we explored genomic drivers of contagion in Chile. We sequenced 3443 SARS-CoV-2 genomes collected between January and July 2021, where the Gamma (P.1), Lambda (C.37), Alpha (B.1.1.7), B.1.1.348, and B.1.1 lineages were predominant. Using a Bayesian model tailored for limited genomic surveillance, we found that Lambda and Gamma variants' reproduction numbers were about 5% and 16% larger than Alpha's, respectively. We observed an overabundance of mutations in the Spike gene, strongly correlated with the variant's transmissibility. Furthermore, the variants' mutational signatures featured a breakpoint concurrent with the beginning of vaccination (mostly CoronaVac, an inactivated virus vaccine), indicating an additional putative selective pressure. Thus, our work provides a reliable method for quantifying novel variants' transmissibility under subsampling (as newly-reported Delta, B.1.617.2) and highlights the importance of continuous genomic surveillance. △ Less

Submitted 23 August, 2021; originally announced August 2021.

Nitrogen-doped graphene based triboelectric nanogenerators

Authors: Giuseppina Pace, Michele Serri, Antonio Esau del Rio Castillo, Alberto Ansaldo, Simone Lauciello, Mirko Prato, Lea Pasquale, Jan Luxa, Vlastimil Mazánek, Zdenek Sofer, Francesco Bonaccorso

Abstract: Harvesting all sources of available clean energy is an essential strategy to contribute to healing current dependence on non-sustainable energy sources. Recently, triboelectric nanogenerators (TENGs) have gained visibility as new mechanical energy harvester offering a valid alternative to batteries, being particularly suitable for portable devices. Here, the increased capacitance of a few-layer gr… ▽ More Harvesting all sources of available clean energy is an essential strategy to contribute to healing current dependence on non-sustainable energy sources. Recently, triboelectric nanogenerators (TENGs) have gained visibility as new mechanical energy harvester offering a valid alternative to batteries, being particularly suitable for portable devices. Here, the increased capacitance of a few-layer graphene-based electrode is obtained by incorporating nitrogen-doped graphene (N_graphene), enabling a 3_fold enhancement in TENGs power output. The dependence of TENGs performance on the electronic properties of different N_graphene types, varying in the do** concentration and in the relative content of N-pyridinic and N-graphitic sites is investigated. These sites have different electron affinities, and synergistically contribute to the variation of the capacitive and resistive properties of N-graphene and consequently, TENG performance. It is demonstrated that the power enhancement of the TENG occurs when the N_graphene, an n-semiconductor, is interfaced between the positive triboelectric material and the electrode, while a deterioration of the electrical performance is observed when it is placed at the interface with the negative triboelectric material. This behavior is explained in terms of the dependence of N_graphene quantum capacitance on the electrode chemical potential which shifts according to the opposite polarization induced at the two electrodes upon triboelectrification. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Journal ref: Nano Energy Volume 87, September 2021, 106173

Anisotropic layer-by-layer carbon nanotubes/boron nitride/rubber composite and its application in electromagnetic shielding

Authors: Yanhu Zhan, Emanuele Lago, Chiara Santillo, Antonio Esau Del Rio Castillo, Shuai Hao, Giovanna G. Buonocore, Zhenming Chen, Hesheng Xia, Marino Lavorgna, Francesco Bonaccorso

Abstract: Multifunctional polymer composites with anisotropic properties are attracting interests as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites are fabricated by combining the layer-by-layer (LBL) filtration method with the alternative assembling of carbon nanotubes (CNTs) and hexagonal boron nitride flakes (hBN) on natural rubber latex particles (… ▽ More Multifunctional polymer composites with anisotropic properties are attracting interests as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites are fabricated by combining the layer-by-layer (LBL) filtration method with the alternative assembling of carbon nanotubes (CNTs) and hexagonal boron nitride flakes (hBN) on natural rubber latex particles (NR). The layered composites exhibit anisotropic thermal and electrical conductivities, which are tailored through the layer formulations. The best composite consists of four layers of NR modified with 8 phr (parts per Hundred Rubber) CNTs (~7.4 wt%) and four alternated layers with 12 phr hBN (~10.7 wt%). The composites exhibit an electromagnetic interference (EMI) shielding effectiveness of 22.41+-0.14 dB mm-1 at 10.3 GHz and a thermal conductivity equal to 0.25 W/(mK). Furthermore, when the layered composite is used as an electrical thermal heater the surface reaches a stable temperature of ~103 C in approx. 2 min, with an input bias of 2.5 V. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Comments: 13 pages, 5 figures

Journal ref: Nanoscale, 2020,12, 7782-7791

Flexible Graphene/Carbon Nanotube Electrochemical Double-Layer Capacitors with Ultrahigh Areal Performance

Authors: Valentino Romano, Beatriz Martin-Garcia, Sebastiano Bellani, Luigi Marasco, Jaya Kumar Panda, Reinier Oropesa-Nunez, Leyla Najafi, Antonio Esau Del Rio Castillo, Mirko Prato, Elisa Mantero, Vittorio Pellegrini, Giovanna D Angelo, Francesco Bonaccorso

Abstract: The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume… ▽ More The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume (production rate ~0.5 kg/day). Commercial single/double walled carbon nanotubes (SDWCNTs) are mixed with graphene flakes in order to act as spacers between the graphene flakes during their film formation. The latter is obtained by one-step vacuum filtration, resulting in self-standing, metal- and binder-free flexible EDLC electrodes with high active material mass loadings up to 30 mg cm-2. The corresponding symmetric WJM-G/SDWCNTs EDLCs exhibit electrode energy densities of 539 uWh cm-2 at 1.3 mW cm-2 and operating power densities up to 532 mW cm-2 (outperforming most of the EDLC technologies). The EDCLs show excellent cycling stability and outstanding flexibility even under highly folded states (up to 180 degrees). The combination of industrial-like production of active materials, simplified manufacturing of EDLC electrodes, and ultrahigh areal performance of the as-produced EDLCs are promising for novel advanced EDLC designs. △ Less

Submitted 11 April, 2020; originally announced May 2020.

Journal ref: ChemPlusChem, 2019, 84, 882

Single-step exfoliation and functionalization of few-layers black phosphorus and its application for polymer composites

Authors: Antonio Esau Del Rio Castillo, Christian Daniel Reyes, Laura Edith Rojas, Sanjay B. Thorat, Michele Serri, Ana Laura Martinez, Carlos Velasco, Vittorio Pellegrini, Francesco Bonaccorso

Abstract: We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process.… ▽ More We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process. We used the exfoliated and functionalised flakes as fillers in a polymethyl methacrylate matrix to test the mechanical endurance, obtaining an improvement in the Young modulus of 106% compared to the bare polymer. These data support the development of black phosphorus materials as 2D-polymer fillers and performance-enhancers. △ Less

Submitted 21 February, 2020; originally announced February 2020.

CVD-graphene/graphene flakes dual-films as advanced DSSC counter electrodes

Authors: Andrea Capasso, Sebastiano Bellani, Alessandro Lorenzo Palma, Leyla Najafi1, Antonio Esaù Del Rio Castillo, Nicola Curreli1, Lucio Cinà, Vaidotas Miseikis, Camilla Coletti, Giuseppe Calogero, Vittorio Pellegrini, Aldo Di Carlo, Francesco Bonaccorso

Abstract: The use of graphene-based electrodes is burgeoning in a wide range of applications, including solar cells, light emitting diodes, touch screens, field-effect transistors, photodetectors, sensors and energy storage systems. The success of such electrodes strongly depends on the implementation of effective production and processing methods for graphene. In this work, we take advantage of two differe… ▽ More The use of graphene-based electrodes is burgeoning in a wide range of applications, including solar cells, light emitting diodes, touch screens, field-effect transistors, photodetectors, sensors and energy storage systems. The success of such electrodes strongly depends on the implementation of effective production and processing methods for graphene. In this work, we take advantage of two different graphene production methods to design an advanced, conductive oxide- and platinum-free, graphene-based counter electrode for dye-sensitized solar cells (DSSCs). In particular, we exploit the combination of a graphene film, produced by chemical vapor deposition (CVD) (CVD-graphene), with few-layer graphene (FLG) flakes, produced by liquid phase exfoliation. The CVD-graphene is used as charge collector, while the FLG flakes, deposited atop by spray coating, act as catalyst for the reduction of the electrolyte redox couple (i.e., I3-/I-- and Co+2/+3). The as-produced counter electrodes are tested in both I3-/I-- and Co+2/+3-based semitransparent DSSCs, showing power conversion efficiencies of 2.1% and 5.09%, respectively, under 1 SUN illumination. At 0.1 SUN, Co+2/+3-based DSSCs achieve a power conversion efficiency as high as 6.87%. Our results demonstrate that the electrical, optical, chemical and catalytic properties of graphene-based dual films, designed by combining CVD-graphene and FLG flakes, are effective alternatives to FTO/Pt counter electrodes for DSSCs for both outdoor and indoor applications. △ Less

Submitted 31 October, 2019; originally announced October 2019.

Journal ref: 2D Materials, 2019, 6 035007

Liquid-phase exfoliated indium-selenide flakes and their application in hydrogen evolution reaction

Authors: Elisa Petroni, Emanuele Lago, Sebastiano Bellani, Danil W. Boukhvalov, Antonio Politano, Bekir Gurbulak, Songul Duman, Mirko Prato, Silvia Gentiluomo, Reinier Oropesa-Nunez, Jaya-Kumar Panda, Peter S. Toth, Antonio Esau Del Rio Castillo, Vittorio Pellegrini, Francesco Bonaccorso

Abstract: Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging fro… ▽ More Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few um, and thicknesses ranging from 1 to 20 nm, with a max population centred at ~ 5 nm, corresponding to 4 Se-In-In-Se quaternary layers. We also show that no formation of further InSe-based compounds (such as In2Se3) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. We highlight the dependence of the InSe flakes morphologies, i.e., surface area and thickness, on the HER performances achieving best efficiencies with small flakes offering predominant edge effects. Our theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 39 pages

Journal ref: Small, Volume 14, Issue 26, June 27, 2018 1800749

Scalable production of graphene inks via wet-jet milling exfoliation for screen-printed micro-supercapacitors

Authors: Sebastiano Bellani, Elisa Petroni, Antonio Esau Del Rio Castillo, Nicola Curreli, Beatriz Martin-Garcia, Reinier Oropesa-Nunez, Mirko Prato, Francesco Bonaccorso

Abstract: The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing meth… ▽ More The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing methods is crucial for the widespread application of MSCs. Here, we report wet-jet milling exfoliation of graphite to scale-up the production of graphene as supercapacitor material. The formulation of aqueous/alcohol-based graphene inks allows metal-free, flexible MSCs to be screen-printed. These MSCs exhibit areal capacitance (Careal) values up to 1.324 mF cm-2 (5.296 mF cm-2 for a single electrode), corresponding to an outstanding volumetric capacitance (Cvol) of 0.490 F cm-3 (1.961 F cm-3 for a single electrode). The screen-printed MSCs can operate up to power density above 20 mW cm-2 at energy density of 0.064 uWh cm-2. The devices exhibit excellent cycling stability over charge-discharge cycling (10000 cycles), bending cycling (100 cycles at bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate-encapsulated MSCs retain their electrochemical properties after a home-laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: Advanced Functional Materials, 2019

WS2-graphite dual-ion battery

Authors: Sebastiano Bellani, Faxing Wang, Gianluca Longoni, Leyla Najafi, Reinier Oropesa-Nunnez, Antonio E. Del Rio Castillo, Mirko Prato, Xiaodong Zhuang, Vittorio Pellegrini, Xinliang Feng, Francesco Bonaccorso

Abstract: A novel WS2-graphite dual-ion battery (DIB) is developed by combining together a conventional graphite cathode and high-capacity few-layer WS2 flakes anode. The WS2 flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows mass production of few-layer WS2 flakes in dispersion, with an exfoliation yield of 100%. The WS2-anodes enable DIBs, based on hexafluorophosphate (PF6-)… ▽ More A novel WS2-graphite dual-ion battery (DIB) is developed by combining together a conventional graphite cathode and high-capacity few-layer WS2 flakes anode. The WS2 flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows mass production of few-layer WS2 flakes in dispersion, with an exfoliation yield of 100%. The WS2-anodes enable DIBs, based on hexafluorophosphate (PF6-) and lithium (Li+) ions, to achieve charge specific capacities of 457, 438, 421, 403, 295 and 169 mAh g-1 at current rates of 0.1, 0.2, 0.3, 0.4, 0.8 and 1.0 A g-1, respectively, outperforming conventional DIBs. The WS2-based DIBs operate in the 0 to 4 V cell voltage range, thus extending the operating voltage window of conventional WS2-based Li-ion batteries (LIBs). These results demonstrate a new route towards the exploitation of WS2, and possibly other transition metal dichalcogenides (TMDs), for the development of next-generation energy storage devices. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: Nano Lett. 2018, 18, 7155-7164

MoS2 Quantum Dot/Graphene Hybrids for Advanced Interface Engineering of CH3NH3PbI3 Perovskite Solar Cell with Efficiency over 20%

Authors: Leyla Najafi, Babak Taheri, Beatriz Martin-Garcia, Sebastiano Bellani, Diego Di Girolamo, Antonio Agresti, Reinier Oropesa-Nunez, Sara Pescetelli, Luigi Vesce, Emanuele Calabro, Mirko Prato, Antonio E. Del Rio Castillo, Aldo Di Carlo, Francesco Bonaccorso

Abstract: Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids betwee… ▽ More Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids between molybdenum disulfide (MoS2) and reduced graphene oxide (RGO) as hole transport layer (HTL) and active buffer layer (ABL) in mesoscopic methylammonium lead iodide (CH3NH3PbI3) perovskite (MAPbI3)-based PSC. We show that zero-dimensional MoS2 quantum dots (MoS2 QDs), derived by liquid phase exfoliated MoS2 flakes, provide both hole-extraction and electron-blocking properties. In fact, on the one hand, intrinsic n-type do**-induced intra-band gap states effectively extract the holes through an electron injection mechanism. On the other hand, quantum confinement effects increase the optical band gap of MoS2 (from 1.4 eV for the flakes to > 3.2 for QDs), raising the minimum energy of its conduction band (from -4.3 eV for the flakes to -2.2 eV for QDs) above the one of conduction band of MAPbI3 (between -3.7 and -4 eV) and hindering electron collection. The van der Waals hybridization of MoS2 QDs with functionalized reduced graphene oxide (f-RGO), obtained by chemical silanization-induced linkage between RGO and (3-mercaptopropyl)trimethoxysilane, is effective to homogenize the deposition of HTLs or ABLs onto the perovskite film, since the two-dimensional (2D) nature of RGO effectively plug the pinholes of the MoS2 QDs films. Our graphene interface engineering (GIE) strategy based on van der Waals MoS2 QD/graphene hybrids enable MAPbI3-based PSCs to achieve PCE up to 20.12% (average PCE of 18.8%). △ Less

Submitted 21 March, 2019; originally announced March 2019.

Journal ref: ACS Nano, 2018, 12, 10736-10754

Engineered MoSe2-based heterostructures for efficient electrochemical hydrogen evolution reaction

Authors: Leyla Najafi, Sebastiano Bellani, Reinier Oropesa-Nuñez, Alberto Ansaldo, Mirko Prato, Antonio Esau Del Rio Castillo, Francesco Bonaccorso

Abstract: Two-dimensional transition metal-dichalcogenides are emerging as efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER-electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Here, we tackle the key challenge that is increasing the number o… ▽ More Two-dimensional transition metal-dichalcogenides are emerging as efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER-electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Here, we tackle the key challenge that is increasing the number of electrocatalytic sites by designing and engineering heterostructures composed of single-/few-layer MoSe2 flakes and carbon nanomaterials (graphene or single-wall carbon nanotubes (SWNTs)) produced by solution processing. The electrochemical coupling between the materials that comprise the heterostructure effectively enhances the HER-electrocatalytic activity of the native MoSe2 flakes. The optimization of the mass loading of MoSe2 flakes and their electrode assembly via monolithic heterostructure stacking provided a cathodic current density of 10mAcm-2 at overpotential of 100mV, a Tafel slope of 63mVdec-1 and an exchange current density (j0) of 0.203 Acm-2. In addition, electrode thermal annealing in a hydrogen environment and chemical bathing in n-butyllithium are exploited to texturize the basal planes of the MoSe2 flakes (through Se-vacancies creation) and to achieve in situ semiconducting-to-metallic phase conversion, respectively, thus they activate new HER-electrocatalytic sites. The as-engineered electrodes show a 4.8-fold enhancement of j0 and a decrease in the Tafel slope to 54mVdec-1. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Doped-MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxides hybrid catalysts for pH-universal electrochemical hydrogen evolution reaction

Authors: Leyla Najafi, Sebastiano Bellani, Reinier Oropesa-Nuñez, Alberto Ansaldo, Mirko Prato, Antonio Esau Del Rio Castillo, Francesco Bonaccorso

Abstract: Clean hydrogen production through efficient and cost-effective electrochemical water splitting is highly promising to meeting future global energy demands. The design of Earth-abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments summarize the outcomes needed for practical applications. Here, we repor… ▽ More Clean hydrogen production through efficient and cost-effective electrochemical water splitting is highly promising to meeting future global energy demands. The design of Earth-abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments summarize the outcomes needed for practical applications. Here, we report a non-noble 3d metal Cl-chemical do** of liquid phase exfoliated single/few-layer flakes of MoSe2 for creating MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxide hybrid HER-catalysts. We propose that the electron-transfer from MoSe2 nanoflakes to metal cations and the chlorine complexation-induced both neutralization, as well as the in situ formation of metal oxide-hydr(oxy)oxides on MoSe2 nanoflake's surface, tailor the proton affinity of the derived catalysts, increasing the number and HER-kinetic of their active sites in both acidic and alkaline electrolytes. The electrochemical coupling between the doped-MoSe2 nanoflakes/metal oxide-hydr(oxy)oxide hybrids and single-walled carbon nanotubes heterostructures further accelerates the HER process. Lastly, monolithic stacking of multiple heterostructures is reported as a facile electrode assembly strategy to achieve overpotential for a cathodic current density of 10mAcm-2 of 0.081V and 0.064V in 0.5M H2SO4 and 1M KOH, respectively. This opens up new opportunities to address the current density vs. overpotential requirements targeted in pH-universal H2 production. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Thioethyl-porphyrazine/Nanocarbon Hybrids for Photoinduced Electron Transfer

Authors: Sandra Belviso, Andrea Capas, Ernesto Santoro, Leyla Najafi, Francesco Lelj, Stefano Superchi, Daniele Casarini, Claudio Villani, Davide Spirito, Sebastiano Bellani, Antonio Esau Del Rio Castillo, Francesco Bonaccorso

Abstract: We designed a novel pyrene-substituted thioethyl-porphyrazine (PzPy) and the formation of supramolecular assembly with nanocarbons demonstrating photoinduced electron transfer ability. As revealed by spectroscopic and electrochemical studies, PzPy displays wide spectral absorption in the visible range, charge separation upon photoexcitation, as well as bandgap and highest occupied/lowest unoccupie… ▽ More We designed a novel pyrene-substituted thioethyl-porphyrazine (PzPy) and the formation of supramolecular assembly with nanocarbons demonstrating photoinduced electron transfer ability. As revealed by spectroscopic and electrochemical studies, PzPy displays wide spectral absorption in the visible range, charge separation upon photoexcitation, as well as bandgap and highest occupied/lowest unoccupied molecular orbital (HOMO/LUMO) energy values, matching the key requirements of organic optoelectronic. Moreover, the presence of a pyrene moiety promotes attractive interactions with pi-conjugated systems. In particular, theoretical calculations show that in the PzPy the HOMO and LUMO are localized on different positions of the molecule, i.e., the HOMO on the pyrene moiety and the LUMO on the macrocycle. Therefore, HOMO-LUMO excitation gives rise to a charge separation, preventing excitons recombination. Two kinds of non-covalent hybrid composites are prepared by mixing the PzPy with single wall carbon nanotubes (SWNTs) and graphene nanoflakes (GNFs), respectively, and used for photocurrent generation through charge transfer processes between PzPy and nanocarbons. Photoconduction experiments show photocurrent generation upon visible light irradiation of both PzPy/SWNT and PzPy/GNF composites (0.78 and 0.71 mA/W at 500 nm, respectively), demonstrating their suitability for optoelectronic applications and light harvesting systems. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 43 pages

Journal ref: Advanced Functional Materials, Volume 28, Issue 21 May 24, 2018, 1705418

Biotransformation and biological impact of graphene and graphene oxide during simulated oral ingestion

Authors: Daniela Guarnieri, Paola Sanchez-Moreno, Antonio Esau Del Rio Castillo, Francesco Bonaccorso, Francesca Gatto, Giuseppe Bardi, Cristina Martin, Ester Vazquez, Tiziano Catelani, Stefania Sabella, Pier Paolo Pompa

Abstract: Graphene is an innovative nanomaterial, made of two-dimensional honeycomb-like carbon lattice, with potential in many different applications. Studying the behaviour of graphene-related materials (GRMs) in biological systems is, therefore, crucial to assess possible side effects. In this work is studied the biotransformation and biological impact of few-layer pristine graphene (FLG) and graphene ox… ▽ More Graphene is an innovative nanomaterial, made of two-dimensional honeycomb-like carbon lattice, with potential in many different applications. Studying the behaviour of graphene-related materials (GRMs) in biological systems is, therefore, crucial to assess possible side effects. In this work is studied the biotransformation and biological impact of few-layer pristine graphene (FLG) and graphene oxide (GOX), following ingestion as exposure route. To mimic FLG and GOX ingestion, an in vitro digestion assay based on a standardized operating procedure (SOP) is applied. The assay simulates the human ingestion of GRMs during their dynamic passage through the different environments of gastrointestinal (GI) tract (salivary, gastric, intestinal). Physical-chemical changes of GRMs during the digestion process are assessed through a detailed Raman spectroscopy characterization. Moreover, the effect of chronic exposure to digested GRMs on integrity and functionality of an in vitro model of intestinal barrier is also determined according to a second SOP. Our results showed that the FLG and GOX nanoflakes aggregates after experiencing the passage through the different environments of GI tract, with evident do** effects, due to the interaction of GRMs with digestive juice components and the strong pH variations. Interestingly, neither structural changes nor degradation of the nanomaterials is observed, suggesting that GRMs are bio-persistent nanomaterials when administered by oral route. Chronic exposure to digested GRMs does not affect intestinal barrier integrity and is not associated to inflammation and cytotoxicity, though possible long-term adverse effects cannot be ruled out, due to the observed bio-durability of the materials. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 32 pages, 8 figures, research paper

Journal ref: Small, Volume 14, Issue 24, June 14, 2018. 1800227

Exfoliation of Few-Layer Black Phosphorus in Low-Boiling-Point Solvents and Its Application in Li-Ion Batteries

Authors: Antonio Esau Del Rio Castillo, Vittorio Pellegrini, Haiyan Sun, Joka Buha, Duc Anh Dinh, Emanuele Lago, Alberto Ansaldo, Andrea Capasso, Liberato Manna, Francesco Bonaccorso

Abstract: The liquid-phase exfoliation (LPE) of black phosphorus (BP) is a strategic route for the large-scale production of phosphorene and few-layer BP (FL-BP) flakes. The exploitation of this exfoliated material in cutting-edge technologies, e.g., in flexible electronics and energy storage, is however limited by the fact that the LPE of BP is usually carried out at a high boiling point and in toxic solve… ▽ More The liquid-phase exfoliation (LPE) of black phosphorus (BP) is a strategic route for the large-scale production of phosphorene and few-layer BP (FL-BP) flakes. The exploitation of this exfoliated material in cutting-edge technologies, e.g., in flexible electronics and energy storage, is however limited by the fact that the LPE of BP is usually carried out at a high boiling point and in toxic solvents. In fact, the solvent residual is detrimental to device performance in real applications; thus, complete solvent removal is critical. Here, we tackle these issues by exfoliating BP in different low boiling-point solvents. Among these solvents, we find that acetone also provides a high concentration of exfoliated BP, leading to the production of FL-BP flakes with an average lateral size and thickness of c.a. 30 and 7 nm, respectively. The use of acetone to produce less defective few-layer BP flakes (FL-BPacetone) from bulk crystals is a straightforward process which enables the rapid preparation of homogeneous thin films thanks to the fast solvent evaporation. The ratio of edge to bulk atoms for the BP flakes here produced, combined with the use of low-boiling-point solvents for the exfoliation process suggests that these thin films are promising anodes for lithium-ion batteries. To this end, we tested Li-ion half cells with FL-BPacetone anodes achieving a reversible specific capacity of 480 mAh/g at a current density of 100 mA/g, over 100 charge/discharge cycles. Moreover, a reversible specific capacity of 345 mAh/g is achieved for the FL-BPacetone-based anode at a high current density (i.e., 1 A/g). These findings indicate that the FL-BPacetone-based battery is promising with regards to the design of fast charge/discharge devices. Overall, the presented process is a step forward toward the fabrication of phosphorene-based devices. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Comments: 30 pages, 11 images

Solution-processed hybrid graphene flake/2H-MoS2 quantum dot heterostructures for efficient electrochemical hydrogen evolution

Authors: Leyla Najafi, Sebastiano Bellani, Beatriz Martin-Garcia, Reinier Oropesa-Nunez, Antonio Esau Del Rio Castillo, Mirko Prato, Iwan Moreels, Francesco Bonaccorso

Abstract: We designed solution-processed, flexible hybrid graphene flake/2H-MoS2 quantum dot (QD) heterostructures, showing enhanced electrocatalytic activity for the hydrogen evolution reaction (HER) with respect to their native individual components. The 2H-MoS2 QDs are produced through a scalable, environmentally friendly, one-step solvothermal approach from two-dimensional (2D) 2H-MoS2 flakes obtained b… ▽ More We designed solution-processed, flexible hybrid graphene flake/2H-MoS2 quantum dot (QD) heterostructures, showing enhanced electrocatalytic activity for the hydrogen evolution reaction (HER) with respect to their native individual components. The 2H-MoS2 QDs are produced through a scalable, environmentally friendly, one-step solvothermal approach from two-dimensional (2D) 2H-MoS2 flakes obtained by liquid phase exfoliation (LPE) of their bulk counterpart in 2-Propanol. This QDs synthesis avoids the use of high boiling point and/or toxic solvents. Graphene flakes are produced by LPE of graphite in N-Methyl-2-pyrrolidone. The electrochemical properties of 2H-MoS2 QDs and their HER-favorable chemical and electronic coupling with graphene enable to reach a current density of 10 mA/cm^2 at an overpotential of 136 mV, surpassing the performances of graphene flake/2H-MoS2 (1T-MoS2) flake heterostructures. Our approach provides a shortcut, viable and cost-effective method for enhancing the 2D materials electrocatalytic properties. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Comments: 31 pages, 15 figures

Few-layer MoS2 flakes as hole-selective layer for solution-processed hybrid organic hydrogen-evolving photocathodes

Authors: Sebastiano Bellani, Leyla Najafi, Antonio Esau Del Rio Castillo, Andrea Capasso, Maria Rosa Antognazza, Francesco Bonaccorso

Abstract: High-efficiency organic photocathodes, based on regioregular poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (rr-P3HT:PCBM) bulk heterojunction sandwiched between charge-selective layers, are emerging as efficient and low-cost devices for solar hydrogen production by water splitting. Nevertheless, stability issues of the materials used as charge-selective layers are hampering the r… ▽ More High-efficiency organic photocathodes, based on regioregular poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (rr-P3HT:PCBM) bulk heterojunction sandwiched between charge-selective layers, are emerging as efficient and low-cost devices for solar hydrogen production by water splitting. Nevertheless, stability issues of the materials used as charge-selective layers are hampering the realization of long-lasting photoelectrodes, pointing out the need to investigate novel and stable materials. Here, we propose MoS2 nano-flakes, produced by Li-aided exfoliation of bulk counterpart, as efficient atomic-thick hole-selective layer for rr-P3HT:PCBM-based photocathodes. We carried out a p-type chemical do** to tune on-demand the MoS2 Fermi level in order to match the highest occupied molecular orbital level of the rr-P3HT, thus easing the hole collection at the electrode. The as-prepared p-doped MoS2-based photocathodes reached a photocurrent of 1.21 mA cm-2 at 0 V vs. RHE, a positive onset potential of 0.56 V vs. RHE and a power-saved figure of merit of 0.43%, showing a 6.1-fold increase with respect to pristine MoS2-based photocathodes, under simulated 1 Sun illumination. Operational activity of the photocathodes over time and under 1 Sun illumination revealed a progressive stabilization of the photocurrents at 0.49 mA cm-2 at 0 V vs. RHE. These results pave the way towards the exploitation of layered crystals as efficiency-boosters for scalable hybrid organic H2-evolving photoelectrochemical cells. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Comments: 33 pages, 16 figures

Journal ref: J. Mater. Chem. A, 2017,5, 4384-4396

Ultralow friction of ink-jet printed graphene flakes

Authors: R. Buzio, A. Gerbi, S. Uttiya, C. Bernini, A. E. Del Rio Castillo, F. Palazon, A. S. Siri, V. Pellegrini, L. Pellegrino, F. Bonaccorso

Abstract: We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies in… ▽ More We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies indicate reduced surface contamination by solvents after a vacuum annealing procedure. Notably, the printed FLG flakes show ultralow friction comparable with micromechanically exfoliated graphene flakes. Lubricity is retained on flakes with lateral size of a few tens of nanometres, and with thickness as small as ~ 2 nm, confirming the high crystalline quality and low defects density in the FLG basal plane. Surface exposed step edges exhibit the highest friction values, representing preferential sites for originating secondary dissipative processes related to edge straining, wear or lateral displacement of the flakes. Our work demonstrates that LPE enables fundamental studies on graphene friction to the single-flake level. The capability to deliver ultralow-friction-graphene over technologically relevant substrates, using a scalable production route and a high-throughput, large-area printing technique, may also open up new opportunities in the lubrication of micro- and nano-electromechanical systems. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Comments: 31 pages, 18 figures,

Journal ref: Nanoscale, 2017,9, 7612-7624

Graphene-Based Hole Selective Layers for High-Efficiency, Solution-Processed, Large-Area, Flexible, Hydrogen-Evolving Organic Photocathodes

Authors: Sebastiano Bellani, Leyla Najafi, Beatriz Martín-García, Alebrto Ansaldo, Antonio Esau Del Rio Castillo, Mirko Prato, Iwan Moreels, Francesco Bonaccorso

Abstract: Regio-regular poly(3-hexylthiophene-2,5-diyl) (rr-P3HT), the work-horse of organic photovoltaics, has been recently exploited in bulk heterojunction (BHJ) configuration with phenyl-C61-butyric acid methyl ester (PCBM) for solution-processed hydrogen-evolving photocathodes, reaching cathodic photocurrents at 0 V vs. RHE (J0V vs RHE) of up to 8 mA cm-2. The photoelectrochemical performance of these… ▽ More Regio-regular poly(3-hexylthiophene-2,5-diyl) (rr-P3HT), the work-horse of organic photovoltaics, has been recently exploited in bulk heterojunction (BHJ) configuration with phenyl-C61-butyric acid methyl ester (PCBM) for solution-processed hydrogen-evolving photocathodes, reaching cathodic photocurrents at 0 V vs. RHE (J0V vs RHE) of up to 8 mA cm-2. The photoelectrochemical performance of these photocathodes strongly depends on the presence of the electron (ESL) and hole (HSL) selective layer. While TiO2 and its sub-stoichiometric phases are consolidated ESL materials, the currently used HSLs (e.g., MoO3, CuI, PEDOTT:PSS, WO3) suffer electrochemical degradation under hydrogen evolution reaction (HER)-working conditions. In this work, we use solution-processed graphene derivatives as HSL to boost efficiency and durability of rr-P3HT:PCBM-based photocathodes, demonstrating record-high performance. In fact, our devices show cathodic J0V vs RHE of 6.01 mA cm-2, onset potential (Vo) of 0.6 V vs. RHE, ratiometric power-saved efficiency (φsaved) of 1.11% and operational activity of 20 hours in 0.5 M H2SO4 solution. Moreover, the designed photocathodes are effectively working in different pH environments ranging from acid to basic. This is pivotal for their exploitation in tandem configurations, where photoanodes operate only in restricted electrochemical conditions. Furthermore, we demonstrate the scalability of our all-solution processed approach by fabricating a large-area (~9 cm2) photocathode on flexible substrate, achieving remarkable cathodic J0V vs RHE of 2.8 mA cm-2, Vo of 0.45 V vs. RHE and φsaved of 0.31%. This is the first demonstration of high-efficient rr-P3HT:PCBM flexible photocathodes based on low-cost and solution-processed manufacturing techniques. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Journal ref: J. Phys. Chem. C, 2017, 121 (40), pp 21887-21903

High-yield production of 2D crystals by wet-jet milling

Authors: Antonio Esau Del Rio Castillo, Vittorio Pellegrini, Alberto Ansaldo, Filiberto Ricciardella, Haiyan Sun, Luigi Marasco, Joka Buha, Zhiya Dang, Luca Gagliani, Emanuele Lago, Nicola Curreli, Silvia Gentiluomo, Francisco Palazon, Peter Toth, Elisa Mantero, Manuel Crugliano, Andrea Gamucci, Andrea Tomadin, Marco Polini, Francesco Bonaccorso

Abstract: Efficient and scalable production of two-dimensional (2D) materials is required to overcome technological hurdles towards the creation of a 2D-materials-based industry. Here, we present a novel approach developed for the exfoliation of layered crystals, i.e., graphite, hexagonal boron nitride and transition metal dichalcogenides. The process is based on high-pressure wet-jet-milling (WJM), resulti… ▽ More Efficient and scalable production of two-dimensional (2D) materials is required to overcome technological hurdles towards the creation of a 2D-materials-based industry. Here, we present a novel approach developed for the exfoliation of layered crystals, i.e., graphite, hexagonal boron nitride and transition metal dichalcogenides. The process is based on high-pressure wet-jet-milling (WJM), resulting in 2 L/hr production of 10 g/L of single- and few-layer 2D crystal flakes in dispersion making the scaling-up more affordable. The WJM process enables the production of defect-free and high-quality 2D-crystal dispersions on a large scale, opening the way for the full exploitation in different commercial applications, e.g., anodes active material in lithium ion batteries, reinforcement in polymer-graphene composites, and transparent conductors as we demonstrate in this report. △ Less

Submitted 27 April, 2018; originally announced April 2018.

Comments: 30 pages, 15 figures

Graphene-based electron transport layers in perovskite solar cells: a step-up for an efficient carrier collection

Authors: F. Biccari, F. Gabelloni, E. Burzi, M. Gurioli, S. Pescetelli, A. Agresti, A. E. Del Rio Castillo, A. Ansaldo, E. Kymakis, F. Bonaccorso, A. Di Carlo, A. Vinattieri

Abstract: The electron transport layer (ETL) plays a fundamental role in perovskite solar cells. Recently, graphene-based ETLs have been proved to be good candidate for scalable fabrication processes and to achieve higher carrier injection with respect to most commonly used ETLs. In this work we experimentally study the effects of different graphene-based ETLs in sensitized MAPI solar cells. By means of tim… ▽ More The electron transport layer (ETL) plays a fundamental role in perovskite solar cells. Recently, graphene-based ETLs have been proved to be good candidate for scalable fabrication processes and to achieve higher carrier injection with respect to most commonly used ETLs. In this work we experimentally study the effects of different graphene-based ETLs in sensitized MAPI solar cells. By means of time-integrated and picosecond time-resolved photoluminescence techniques, the carrier recombination dynamics in MAPI films embedded in different ETLs is investigated. Using graphene doped mesoporous TiO2 (G+mTiO2) with the addition of a lithium-neutralized graphene oxide (GO-Li) interlayer as ETL, we find that the carrier collection efficiency is increased by about a factor two with respect to standard mTiO2. Taking advantage of the absorption coefficient dispersion, we probe the MAPI layer morphology, along the thickness, finding that the MAPI embedded in the ETL composed by G+mTiO2 plus GO-Li brings to a very good crystalline quality of the MAPI layer with a trap density about one order of magnitude lower than that found with the other ETLs. In addition, this ETL freezes MAPI at the tetragonal phase, regardless of the temperature. Graphene-based ETLs can open the way to significant improvement of perovskite solar cells. △ Less

Submitted 16 May, 2017; v1 submitted 14 February, 2017; originally announced February 2017.

Comments: 7 pages, 5 figures, Supporting Information

Thermal Stability and Anisotropic Sublimation of Two-Dimensional Colloidal Bi2Te3 and Bi2Se3 Nanocrystals

Authors: Joka Buha, Roberto Gaspari, Antonio Esau Del Rio Castillo, Francesco Bonaccorso, Liberato Manna

Abstract: The structural and compositional stabilities of two dimensional 2D Bi2Te3 and Bi2Se3 nanocrystals, produced by both colloidal synthesis and by liquid phase exfoliation, were studied by in situ transmission electron microscopy TEM during annealing at temperatures between 350 and 500 C. The sublimation process induced by annealing is structurally and chemically anisotropic and takes place through th… ▽ More The structural and compositional stabilities of two dimensional 2D Bi2Te3 and Bi2Se3 nanocrystals, produced by both colloidal synthesis and by liquid phase exfoliation, were studied by in situ transmission electron microscopy TEM during annealing at temperatures between 350 and 500 C. The sublimation process induced by annealing is structurally and chemically anisotropic and takes place through the preferential dismantling of the prismatic 011-0 type planes, and through the preferential sublimation of Te or Se. △ Less

Submitted 16 September, 2016; originally announced September 2016.

Comments: 23 pages, 5 figures, May 27, 2016 Letter pubs.acs.org/NanoLett Nano Letters, May 27, 2016