Showing 1–14 of 14 results for author: Carvalho, N C

Kerr-optomechanical spectroscopy of multimode diamond resonators

Authors: Parisa Behjat, Peyman Parsa, Natalia C. Carvalho, Prasoon K. Shandilya, Paul E. Barclay

Abstract: Diamond microdisk cavities play a key role in optomechanical and spin-optomechanical technologies. Previous optomechanical studies of these devices have focused exclusively on their fundamental radial breathing mode. Accessing other mechanical modes of these structures is desirable for identifying routes towards improving their optomechanical properties, implementing multimode optomechanical syste… ▽ More Diamond microdisk cavities play a key role in optomechanical and spin-optomechanical technologies. Previous optomechanical studies of these devices have focused exclusively on their fundamental radial breathing mode. Accessing other mechanical modes of these structures is desirable for identifying routes towards improving their optomechanical properties, implementing multimode optomechanical systems, and broadening the accessible range of resonant spin--phonon coupling processes. Here we perform broadband optomechanical spectroscopy on diamond microdisks, and observe high quality factor mechanical modes with frequencies up to 10 GHz. Through Fano interference of their optomechanical response with diamond's Kerr nonlinear optical response, we estimate that optomechanical coupling of these high frequency modes can exceed 10 kHz, making them attractive for high-frequency multimode optomechanics. In combination with their per-phonon stress of a few kPa, these properties makes them excellent candidates for spin-optomechanical coupling. △ Less

Submitted 17 June, 2023; originally announced June 2023.

Diamond Integrated Quantum Photonics: A Review

Authors: Prasoon K. Shandilya, Sigurd Flågan, Natalia C. Carvalho, Elham Zohari, Vinaya K. Kavatamane, Joseph E. Losby, Paul E. Barclay

Abstract: Integrated quantum photonics devices in diamond have tremendous potential for many quantum applications, including long-distance quantum communication, quantum information processing, and quantum sensing. These devices benefit from diamond's combination of exceptional thermal, optical, and mechanical properties. Its wide electronic bandgap makes diamond an ideal host for a variety of optical activ… ▽ More Integrated quantum photonics devices in diamond have tremendous potential for many quantum applications, including long-distance quantum communication, quantum information processing, and quantum sensing. These devices benefit from diamond's combination of exceptional thermal, optical, and mechanical properties. Its wide electronic bandgap makes diamond an ideal host for a variety of optical active spin qubits that are key building blocks for quantum technologies. In landmark experiments, diamond spin qubits have enabled demonstrations of remote entanglement, memory-enhanced quantum communication, and multi-qubit spin registers with fault-tolerant quantum error correction, leading to the realization of multinode quantum networks. These advancements put diamond at the forefront of solid-state material platforms for quantum information processing. Recent developments in diamond nanofabrication techniques provide a promising route to further scaling of these landmark experiments towards real-life quantum technologies. In this paper, we focus on the recent progress in creating integrated diamond quantum photonic devices, with particular emphasis on spin-photon interfaces, cavity optomechanical devices, and spin-phonon transduction. Finally, we discuss prospects and remaining challenges for the use of diamond in scalable quantum technologies. △ Less

Submitted 18 July, 2022; originally announced July 2022.

Comments: 31 pages, 8 figures

Journal ref: IEEE JLT 2022

Accurate modeling and characterization of photothermal forces in optomechanics

Authors: André G. Primo, Cauê M. Kersul, Rodrigo Benevides, Natália C. Carvalho, Michaël Ménard, Newton C. Frateschi, Pierre-Louis de Assis, Gustavo S. Wiederhecker, Thiago P. Mayer Alegre

Abstract: Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experi… ▽ More Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experimental tests on GaAs microdisks cavities and obtain striking agreement with our framework, revealing the importance of considering surface photothermal forces and the effects of multiple thermal modes in microphotonic devices. △ Less

Submitted 7 July, 2021; v1 submitted 22 August, 2020; originally announced August 2020.

High-Frequency GaAs Optomechanical Bullseye Resonator

Authors: N. C. Carvalho, R. Benevides, M. Ménard, G. S. Wiederhecker, N. C. Frateschi, T. P. Mayer Alegre

Abstract: The integration of optomechanics and optoelectronics in a single device opens new possibilities for develo** information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical res… ▽ More The integration of optomechanics and optoelectronics in a single device opens new possibilities for develo** information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical resonator with a ring-type bullseye geometry that is unprecedented in this platform. We measured mechanical modes up to 3.4 GHz with quality factors of 4000 (at 77 K) and optomechanical coupling rates up to 39 kHz at telecom wavelengths. Moreover, we investigated the material symmetry break due to elastic anisotropy and its impact on the mechanical mode spectrum. Finally, we assessed the temperature dependence of the mechanical losses and demonstrated the efficiency and anisotropy resilience of the bullseye anchor loss suppression, indicating that lower temperature operation may allow mechanical quality factors over $10^4$. Such characteristics are valuable for active optomechanics, coherent microwave-to-optics conversion via piezo-mechanics and other implementations of high-frequency oscillators in III-V materials. △ Less

Submitted 23 October, 2020; v1 submitted 7 August, 2020; originally announced August 2020.

Comments: 8 pages, 5 figures

Quasinormal-mode perturbation theory for dissipative and dispersive optomechanics

Authors: André G. Primo, Natália C. Carvalho, Cauê M. Kersul, Newton C. Frateschi, Gustavo S. Wiederhecker, Thiago P. Mayer Alegre

Abstract: Despite the several novel features arising from the dissipative optomechanical coupling, such effect remains vastly unexplored due to the lack of a simple formalism that captures non-Hermiticity in optomechanical systems. In this Letter, we show that quasinormal-mode-based perturbation theory is capable of correctly predicting both dispersive and dissipative optomechanical couplings. We validate o… ▽ More Despite the several novel features arising from the dissipative optomechanical coupling, such effect remains vastly unexplored due to the lack of a simple formalism that captures non-Hermiticity in optomechanical systems. In this Letter, we show that quasinormal-mode-based perturbation theory is capable of correctly predicting both dispersive and dissipative optomechanical couplings. We validate our model through simulations and also by comparison with experimental results reported in the literature. Finally, we apply this formalism to plasmonic systems, used for molecular optomechanics, where strong dissipative coupling signatures in the amplification of vibrational modes are observed. △ Less

Submitted 5 October, 2020; v1 submitted 31 May, 2020; originally announced June 2020.

Piezo-optomechanical coupling of a 3D microwave resonator to a bulk acoustic wave crystalline resonator

Authors: N. C. Carvalho, J. Bourhill, M. Goryachev, S. Galliou, M. E. Tobar

Abstract: We report the observation of coupling between a 3D microwave cavity mode and a bulk mechanical resonator mediated by piezoelectric and radiation pressure effects. The system is composed of a quartz bulk acoustic wave resonator placed inside a microwave re-entrant cavity, which is designed to act as both the electrodes for piezoelectric actuation as well as a 3D resonator. The cavity electromagneti… ▽ More We report the observation of coupling between a 3D microwave cavity mode and a bulk mechanical resonator mediated by piezoelectric and radiation pressure effects. The system is composed of a quartz bulk acoustic wave resonator placed inside a microwave re-entrant cavity, which is designed to act as both the electrodes for piezoelectric actuation as well as a 3D resonator. The cavity electromagnetic mode is modulated by a 5 MHz bulk acoustic wave shear mode, which is modeled and experimentally verified using the input-output formalism. Through finite element method simulations, we calculate the various contributions to the electromechanical coupling and discuss the potential of the system to reach high cooperativities as well as suitable applications. △ Less

Submitted 15 September, 2019; v1 submitted 26 May, 2019; originally announced July 2019.

Sensitivity Characterisation of a Parametric Transducer for Gravitational Wave Detection Through Optical Spring Effect

Authors: N. C. Carvalho, O. D. Aguiar, J. Bourhill, M. E. Tobar

Abstract: We present the characterisation of the most recent parametric transducers designed to enhance the Mario Schenberg Gravitational Wave Detector sensitivity. The transducer is composed of a microwave re-entrant cavity that attaches to the gravitational wave antenna via a rigid spring. It functions as a three-mode mass-spring system; motion of the spherical antenna couples to a 50 $μm$ thick membrane,… ▽ More We present the characterisation of the most recent parametric transducers designed to enhance the Mario Schenberg Gravitational Wave Detector sensitivity. The transducer is composed of a microwave re-entrant cavity that attaches to the gravitational wave antenna via a rigid spring. It functions as a three-mode mass-spring system; motion of the spherical antenna couples to a 50 $μm$ thick membrane, which converts its mechanical motion into a frequency shift of the cavity resonance. Through the optical spring effect, the microwave transducer frequency-displacement sensitivity was measured to be 726 $MHz/μ$m at 4 K. The spherical antenna detection sensitivity is determined analytically using the transducer amplification gain and equivalent displacement noise in the test setup, which are 5.5 $\times$ 10$^{11} V/m$ and $1.8 \times 10^{-19} m\sqrt{Hz}^{-1}$, respectively. △ Less

Submitted 24 July, 2017; v1 submitted 6 March, 2017; originally announced March 2017.

Low-Temperature Microwave Properties of Biaxial YAlO3

Authors: N. C. Carvalho, M. Goryachev, J. Krupka, P. Bushev, M. E. Tobar

Abstract: Low-loss crystals with defects due to paramagnetic or rare earth impurity ions is a major area of investigation for quantum hybrid systems at both optical and microwave frequencies. In this work we examine the single crystal yttrium aluminium perovskite, YAlO$_3$ using the Whispering Gallery Mode Technique. Multiple resonant microwave modes were measured from room temperature to 20 mK allowing pre… ▽ More Low-loss crystals with defects due to paramagnetic or rare earth impurity ions is a major area of investigation for quantum hybrid systems at both optical and microwave frequencies. In this work we examine the single crystal yttrium aluminium perovskite, YAlO$_3$ using the Whispering Gallery Mode Technique. Multiple resonant microwave modes were measured from room temperature to 20 mK allowing precise characterization of the permittivity tensor at microwave frequencies. We show that it is biaxial and characterize the tensor as a function of temperature with estimated uncertainties below 0.26%. Electron spin resonance spectroscopy was also performed at 20 mK, with new transitions identified with Zero-Field splittings of 16.72 and 9.92 GHz. Spin-photon couplings of order 4.2 and 8.4 MHz were observed for residual levels of concentration, which are stronger than the photon cavity linewidths of 116 kHz but the same order of the linewidths of the discovered spin transitions. △ Less

Submitted 24 July, 2017; v1 submitted 7 February, 2017; originally announced February 2017.

Journal ref: Phys. Rev. B 96, 045141 (2017)

Piezoelectric Tunable Microwave Superconducting Cavity

Authors: N. C. Carvalho, Y. Fan, M. E. Tobar

Abstract: In the context of engineered quantum systems, there is a demand for superconducting tunable devices able to operate with high Q-factors at power levels equivalent to only a few photons. In this work, we developed a 3D microwave reentrant cavity with such characteristics ready to provide a very fine-tuning of a high-Q resonant mode over a large dynamic range. This system has an electronic tuning me… ▽ More In the context of engineered quantum systems, there is a demand for superconducting tunable devices able to operate with high Q-factors at power levels equivalent to only a few photons. In this work, we developed a 3D microwave reentrant cavity with such characteristics ready to provide a very fine-tuning of a high-Q resonant mode over a large dynamic range. This system has an electronic tuning mechanism based on a mechanically amplified piezoelectric actuator, which controls the resonator dominant mode frequency by changing the cavity narrow gap by very small displacements. Experiments were conducted at room and dilution refrigerator temperatures showing a large dynamic range up to 4 GHz and 1 GHz, respectively, and were compared to a FEM model simulated data. At elevated microwave power input, nonlinear thermal effects were observed to destroy the superconductivity of the cavity due to the large electric fields generated in the small gap of the reentrant cavity. △ Less

Submitted 7 February, 2017; v1 submitted 15 March, 2016; originally announced March 2016.

Journal ref: Review of Scientific Instruments 87(9) 94702, Sep 2016

Multi-mode technique for the determination of the biaxial Y2SiO5 permittivity tensor from 300 to 6 Kelvin

Authors: N. C. Carvalho, J-M. Le Floch, J. Krupka, M. E. Tobar

Abstract: The Y2SiO5 (YSO) crystal is a dielectric material with biaxial anisotropy with known values of refractive index at optical frequencies. It is a well-known rare-earth (RE) host material for optical research and more recently has shown promising performance for quantum-engineered devices. In this paper, we report the first microwave characterization of the real permittivity tensor of a bulk YSO samp… ▽ More The Y2SiO5 (YSO) crystal is a dielectric material with biaxial anisotropy with known values of refractive index at optical frequencies. It is a well-known rare-earth (RE) host material for optical research and more recently has shown promising performance for quantum-engineered devices. In this paper, we report the first microwave characterization of the real permittivity tensor of a bulk YSO sample, as well as an investigation of the temperature dependence of the tensor components from 296 K down to 6 K. Estimated uncertainties were below 0.26%, limited by the precision of machining the cylindrical dielectric. Also, the electrical Q-factors of a few electromagnetic modes were recorded as a way to provide some information about the crystal losses over the temperature range. To solve the tensor components necessary for a biaxial crystal, we developed the multi-mode technique, which uses simultaneous measurement of low order Whispering Gallery Modes. Knowledge of the permittivity tensor offers important data, essential for the design of technologies involving YSO, such as microwave coupling to electron and hyperfine transitions in RE doped samples at low temperatures. △ Less

Submitted 21 April, 2015; v1 submitted 12 March, 2015; originally announced March 2015.

Comments: 4 pages, 3 figures

Piezoelectric Voltage Coupled Reentrant Cavity Resonator

Authors: Natalia C. Carvalho, Yaohui Fan, Jean-Michel Le Floch, Michael Edmund Tobar

Abstract: A piezoelectric voltage coupled microwave reentrant cavity has been developed. The central cavity post is bonded to a piezoelectric actuator allowing the voltage control of small post displacements over a high dynamic range. We show that such a cavity can be implemented as a voltage tunable resonator, a transducer for exciting and measuring mechanical modes of the structure and a transducer for me… ▽ More A piezoelectric voltage coupled microwave reentrant cavity has been developed. The central cavity post is bonded to a piezoelectric actuator allowing the voltage control of small post displacements over a high dynamic range. We show that such a cavity can be implemented as a voltage tunable resonator, a transducer for exciting and measuring mechanical modes of the structure and a transducer for measuring comparative sensitivity of the piezoelectric material. Experiments were conducted at room and cryogenic temperatures with results verified using Finite Element software. △ Less

Submitted 10 December, 2014; originally announced December 2014.

Journal ref: Review of Scientific Instruments 85, 104705 (2014)

Strong Coupling Between Whispering Gallery Photons and Spin States of Iron Group Impurity Ions

Authors: Maxim Goryachev, Warrick G. Farr, Natalia C. Carvalho, Daniel L. Creedon, Jean-Michel Le Floch, Sebastian Probst, Pavel Bushev, Michael E. Tobar

Abstract: Interaction of Whispering Gallery Modes (WGM) with dilute spin ensembles in solids is an interesting paradigm of Hybrid Quantum Systems potentially beneficial for Quantum Signal Processing applications. In the present work, WGM spectroscopy of Rare-Earth doped YSO crystal reveals the existence of Iron Group Ion (IGI) co-do**s with concentration levels of order 100 ppb. The IGI spin ensembles dem… ▽ More Interaction of Whispering Gallery Modes (WGM) with dilute spin ensembles in solids is an interesting paradigm of Hybrid Quantum Systems potentially beneficial for Quantum Signal Processing applications. In the present work, WGM spectroscopy of Rare-Earth doped YSO crystal reveals the existence of Iron Group Ion (IGI) co-do**s with concentration levels of order 100 ppb. The IGI spin ensembles demonstrate large Zero Field Splittings at 14.7GHz, 18.4GHz and 25.4GHz, considerable anisotropy of the \textrm{g}-tensors, as well as two inequivalent lattice sites. Strong coupling regimes between an ensemble of IGI spins and WGM photons have been demonstrated at $18.4$ GHz and near zero field. This approach together with useful optical properties of these ions opens a new avenue for 'spins-in-solids' Quantum Electrodynamics. △ Less

Submitted 8 June, 2015; v1 submitted 24 October, 2014; originally announced October 2014.

Journal ref: Appl. Phys. Lett. 106, 232401 (2015)

Discovery of higher order reentrant modes by constructing a cylindrical symmetric ring and post cavity resonator

Authors: Y. Fan, Z. Zhang, N. C. Carvalho, J-M. Le Floch, Q. Shan, M. E. Tobar

Abstract: Analysis of the properties of resonant modes in a reentrant cavity structure comprising of a post and a ring was undertaken and verified experimentally. In particular we show the existence of higher order reentrant cavity modes in such a structure. Results show that the new cavity has two re-entrant modes, one which has a better displacement sensitivity than the single post resonator and the other… ▽ More Analysis of the properties of resonant modes in a reentrant cavity structure comprising of a post and a ring was undertaken and verified experimentally. In particular we show the existence of higher order reentrant cavity modes in such a structure. Results show that the new cavity has two re-entrant modes, one which has a better displacement sensitivity than the single post resonator and the other with a reduced sensitivity. The more sensitive mode is better than the single post resonator by a factor of 2 to 1.5 when the gap spacing is below 100 $ μ$m. This type of cavity has the potential to operate as a highly sensitive transducer for a variety of precision measurement applications, in particular applications which require coupling to more than one sensitive transducer mode. △ Less

Submitted 10 March, 2014; v1 submitted 27 September, 2013; originally announced September 2013.

Rigorous analysis of highly tunable cylindrical Transverse Magnetic mode re-entrant cavities

Authors: J-M. Le Floch, Y. Fan, M. Aubourg, D. Cros, N. C. Carvalho, Q. Shan, J. Bourhill, E. N. Ivanov, G. Humbert, V. Madrangeas, M. E. Tobar

Abstract: Cylindrical re-entrant cavities are unique three-dimensional structures that resonate with their electric and magnetic fields in separate parts of the cavity. To further understand these devices, we undertake rigorous analysis of the properties of the resonance using in-house developed Finite Element Method (FEM) software capable of dealing with small gap structures of extreme aspect ratio. Compar… ▽ More Cylindrical re-entrant cavities are unique three-dimensional structures that resonate with their electric and magnetic fields in separate parts of the cavity. To further understand these devices, we undertake rigorous analysis of the properties of the resonance using in-house developed Finite Element Method (FEM) software capable of dealing with small gap structures of extreme aspect ratio. Comparisons between the FEM method and experiments are consistent and we illustrate where predictions using established lumped element models work well and where they are limited. With the aid of the modeling we design a highly tunable cavity that can be tuned from 2 GHz to 22 GHz just by inserting a post into a fixed dimensioned cylindrical cavity. We show this is possible as the mode structure transforms from a re-entrant mode during the tuning process to a standard cylindrical Transverse Magnetic (TM) mode. △ Less

Submitted 8 January, 2014; v1 submitted 13 August, 2013; originally announced August 2013.