-
Optimization-Based System Identification and Moving Horizon Estimation Using Low-Cost Sensors for a Miniature Car-Like Robot
Authors:
Sabrina Bodmer,
Lukas Vogel,
Simon Muntwiler,
Alexander Hansson,
Tobias Bodewig,
Jonas Wahlen,
Melanie N. Zeilinger,
Andrea Carron
Abstract:
This paper presents an open-source miniature car-like robot with low-cost sensing and a pipeline for optimization-based system identification, state estimation, and control. The overall robotics platform comes at a cost of less than $700 and thus significantly simplifies the verification of advanced algorithms in a realistic setting. We present a modified bicycle model with Pacejka tire forces to…
▽ More
This paper presents an open-source miniature car-like robot with low-cost sensing and a pipeline for optimization-based system identification, state estimation, and control. The overall robotics platform comes at a cost of less than $700 and thus significantly simplifies the verification of advanced algorithms in a realistic setting. We present a modified bicycle model with Pacejka tire forces to model the dynamics of the considered all-wheel drive vehicle and to prevent singularities of the model at low velocities. Furthermore, we provide an optimization-based system identification approach and a moving horizon estimation (MHE) scheme. In extensive hardware experiments, we show that the presented system identification approach results in a model with high prediction accuracy, while the MHE results in accurate state estimates. Finally, the overall closed-loop system is shown to perform well even in the presence of sensor failure for limited time intervals. All hardware, firmware, and control and estimation software is released under a BSD 2-clause license to promote widespread adoption and collaboration within the community.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Perfecting Periodic Trajectory Tracking: Model Predictive Control with a Periodic Observer ($Π$-MPC)
Authors:
Luis Pabon,
Johannes Köhler,
John Irvin Alora,
Patrick Benito Eberhard,
Andrea Carron,
Melanie N. Zeilinger,
Marco Pavone
Abstract:
In Model Predictive Control (MPC), discrepancies between the actual system and the predictive model can lead to substantial tracking errors and significantly degrade performance and reliability. While such discrepancies can be alleviated with more complex models, this often complicates controller design and implementation. By leveraging the fact that many trajectories of interest are periodic, we…
▽ More
In Model Predictive Control (MPC), discrepancies between the actual system and the predictive model can lead to substantial tracking errors and significantly degrade performance and reliability. While such discrepancies can be alleviated with more complex models, this often complicates controller design and implementation. By leveraging the fact that many trajectories of interest are periodic, we show that perfect tracking is possible when incorporating a simple observer that estimates and compensates for periodic disturbances. We present the design of the observer and the accompanying tracking MPC scheme, proving that their combination achieves zero tracking error asymptotically, regardless of the complexity of the unmodelled dynamics. We validate the effectiveness of our method, demonstrating asymptotically perfect tracking on a high-dimensional soft robot with nearly 10,000 states and a fivefold reduction in tracking errors compared to a baseline MPC on small-scale autonomous race car experiments.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
MPCC++: Model Predictive Contouring Control for Time-Optimal Flight with Safety Constraints
Authors:
Maria Krinner,
Angel Romero,
Leonard Bauersfeld,
Melanie Zeilinger,
Andrea Carron,
Davide Scaramuzza
Abstract:
Quadrotor flight is an extremely challenging problem due to the limited control authority encountered at the limit of handling. Model Predictive Contouring Control (MPCC) has emerged as a promising model-based approach for time optimization problems such as drone racing. However, the standard MPCC formulation used in quadrotor racing introduces the notion of the gates directly in the cost function…
▽ More
Quadrotor flight is an extremely challenging problem due to the limited control authority encountered at the limit of handling. Model Predictive Contouring Control (MPCC) has emerged as a promising model-based approach for time optimization problems such as drone racing. However, the standard MPCC formulation used in quadrotor racing introduces the notion of the gates directly in the cost function, creating a multi objective optimization that continuously trades off between maximizing progress and tracking the path accurately. This paper introduces three key components that enhance the state-of-the-art MPCC approach for drone racing. First and foremost, we provide safety guarantees in the form of a track constraint and terminal set. The track constraint is designed as a spatial constraint which prevents gate collisions while allowing for time optimization only in the cost function. Second, we augment the existing first principles dynamics with a residual term that captures complex aerodynamic effects and thrust forces learned directly from real-world data. Third, we use Trust Region Bayesian Optimization (TuRBO), a state-of-the-art global Bayesian Optimization algorithm, to tune the hyperparameters of the MPCC controller given a sparse reward based on lap time minimization. The proposed approach achieves similar lap times to the best-performing RL policy and outperforms the best model-based controller while satisfying constraints. In both simulation and real world, our approach consistently prevents gate crashes with 100% success rate, while pushing the quadrotor to its physical limits reaching speeds of more than 80km/h.
△ Less
Submitted 14 June, 2024; v1 submitted 26 March, 2024;
originally announced March 2024.
-
ForzaETH Race Stack -- Scaled Autonomous Head-to-Head Racing on Fully Commercial off-the-Shelf Hardware
Authors:
Nicolas Baumann,
Edoardo Ghignone,
Jonas Kühne,
Niklas Bastuck,
Jonathan Becker,
Nadine Imholz,
Tobias Kränzlin,
Tian Yi Lim,
Michael Lötscher,
Luca Schwarzenbach,
Luca Tognoni,
Christian Vogt,
Andrea Carron,
Michele Magno
Abstract:
Autonomous racing in robotics combines high-speed dynamics with the necessity for reliability and real-time decision-making. While such racing pushes software and hardware to their limits, many existing full-system solutions necessitate complex, custom hardware and software, and usually focus on Time-Trials rather than full unrestricted Head-to-Head racing, due to financial and safety constraints.…
▽ More
Autonomous racing in robotics combines high-speed dynamics with the necessity for reliability and real-time decision-making. While such racing pushes software and hardware to their limits, many existing full-system solutions necessitate complex, custom hardware and software, and usually focus on Time-Trials rather than full unrestricted Head-to-Head racing, due to financial and safety constraints. This limits their reproducibility, making advancements and replication feasible mostly for well-resourced laboratories with comprehensive expertise in mechanical, electrical, and robotics fields. Researchers interested in the autonomy domain but with only partial experience in one of these fields, need to spend significant time with familiarization and integration. The ForzaETH Race Stack addresses this gap by providing an autonomous racing software platform designed for F1TENTH, a 1:10 scaled Head-to-Head autonomous racing competition, which simplifies replication by using commercial off-the-shelf hardware. This approach enhances the competitive aspect of autonomous racing and provides an accessible platform for research and development in the field. The ForzaETH Race Stack is designed with modularity and operational ease of use in mind, allowing customization and adaptability to various environmental conditions, such as track friction and layout. Capable of handling both Time-Trials and Head-to-Head racing, the stack has demonstrated its effectiveness, robustness, and adaptability in the field by winning the official F1TENTH international competition multiple times.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Inherently robust suboptimal MPC for autonomous racing with anytime feasible SQP
Authors:
Logan Numerow,
Andrea Zanelli,
Andrea Carron,
Melanie N. Zeilinger
Abstract:
In recent years, the increasing need for high-performance controllers in applications like autonomous driving has motivated the development of optimization routines tailored to specific control problems. In this paper, we propose an efficient inexact model predictive control (MPC) strategy for autonomous miniature racing with inherent robustness properties. We rely on a feasible sequential quadrat…
▽ More
In recent years, the increasing need for high-performance controllers in applications like autonomous driving has motivated the development of optimization routines tailored to specific control problems. In this paper, we propose an efficient inexact model predictive control (MPC) strategy for autonomous miniature racing with inherent robustness properties. We rely on a feasible sequential quadratic programming (SQP) algorithm capable of generating feasible intermediate iterates such that the solver can be stopped after any number of iterations, without jeopardizing recursive feasibility. In this way, we provide a strategy that computes suboptimal and yet feasible solutions with a computational footprint that is much lower than state-of-the-art methods based on the computation of locally optimal solutions. Under suitable assumptions on the terminal set and on the controllability properties of the system, we can state that, for any sufficiently small disturbance affecting the system's dynamics, recursive feasibility can be guaranteed. We validate the effectiveness of the proposed strategy in simulation and by deploying it onto a physical experiment with autonomous miniature race cars. Both the simulation and experimental results demonstrate that, using the feasible SQP method, a feasible solution can be obtained with moderate additional computational effort compared to strategies that resort to early termination without providing a feasible solution. At the same time, the proposed method is significantly faster than the state-of-the-art solver Ipopt.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
Physics-Informed Machine Learning for Modeling and Control of Dynamical Systems
Authors:
Truong X. Nghiem,
Ján Drgoňa,
Colin Jones,
Zoltan Nagy,
Roland Schwan,
Biswadip Dey,
Ankush Chakrabarty,
Stefano Di Cairano,
Joel A. Paulson,
Andrea Carron,
Melanie N. Zeilinger,
Wenceslao Shaw Cortez,
Draguna L. Vrabie
Abstract:
Physics-informed machine learning (PIML) is a set of methods and tools that systematically integrate machine learning (ML) algorithms with physical constraints and abstract mathematical models developed in scientific and engineering domains. As opposed to purely data-driven methods, PIML models can be trained from additional information obtained by enforcing physical laws such as energy and mass c…
▽ More
Physics-informed machine learning (PIML) is a set of methods and tools that systematically integrate machine learning (ML) algorithms with physical constraints and abstract mathematical models developed in scientific and engineering domains. As opposed to purely data-driven methods, PIML models can be trained from additional information obtained by enforcing physical laws such as energy and mass conservation. More broadly, PIML models can include abstract properties and conditions such as stability, convexity, or invariance. The basic premise of PIML is that the integration of ML and physics can yield more effective, physically consistent, and data-efficient models. This paper aims to provide a tutorial-like overview of the recent advances in PIML for dynamical system modeling and control. Specifically, the paper covers an overview of the theory, fundamental concepts and methods, tools, and applications on topics of: 1) physics-informed learning for system identification; 2) physics-informed learning for control; 3) analysis and verification of PIML models; and 4) physics-informed digital twins. The paper is concluded with a perspective on open challenges and future research opportunities.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Model Predictive Control for Multi-Agent Systems under Limited Communication and Time-Varying Network Topology
Authors:
Danilo Saccani,
Lorenzo Fagiano,
Melanie N. Zeilinger,
Andrea Carron
Abstract:
In control system networks, reconfiguration of the controller when agents are leaving or joining the network is still an open challenge, in particular when operation constraints that depend on each agent's behavior must be met. Drawing our motivation from mobile robot swarms, in this paper, we address this problem by optimizing individual agent performance while guaranteeing persistent constraint…
▽ More
In control system networks, reconfiguration of the controller when agents are leaving or joining the network is still an open challenge, in particular when operation constraints that depend on each agent's behavior must be met. Drawing our motivation from mobile robot swarms, in this paper, we address this problem by optimizing individual agent performance while guaranteeing persistent constraint satisfaction in presence of bounded communication range and time-varying network topology. The approach we propose is a model predictive control (MPC) formulation, building on multi-trajectory MPC (mt-MPC) concepts. To enable plug and play operations when the system is in closed-loop without the need of a request, the proposed MPC scheme predicts two different state trajectories in the same finite horizon optimal control problem. One trajectory drives the system to the desired target, assuming that the network topology will not change in the prediction horizon, while the second one ensures constraint satisfaction assuming a worst-case scenario in terms of new agents joining the network in the planning horizon. Recursive feasibility and stability of the closed-loop system during plug and play operations are shown. The approach effectiveness is illustrated with a numerical simulation.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Active Learning-based Model Predictive Coverage Control
Authors:
Rahel Rickenbach,
Johannes Köhler,
Anna Scampicchio,
Melanie N. Zeilinger,
Andrea Carron
Abstract:
The problem of coverage control, i.e., of coordinating multiple agents to optimally cover an area, arises in various applications. However, coverage applications face two major challenges: (1) dealing with nonlinear dynamics while respecting system and safety critical constraints, and (2) performing the task in an initially unknown environment. We solve the coverage problem by using a hierarchical…
▽ More
The problem of coverage control, i.e., of coordinating multiple agents to optimally cover an area, arises in various applications. However, coverage applications face two major challenges: (1) dealing with nonlinear dynamics while respecting system and safety critical constraints, and (2) performing the task in an initially unknown environment. We solve the coverage problem by using a hierarchical framework, in which references are calculated at a central server and passed to the agents' local model predictive control (MPC) tracking schemes. Furthermore, to ensure that the environment is actively explored by the agents a probabilistic exploration-exploitation trade-off is deployed. In addition, we derive a control framework that avoids the hierarchical structure by integrating the reference optimization in the MPC formulation. Active learning is then performed drawing inspiration from Upper Confidence Bound (UCB) approaches. For all developed control architectures, we guarantee closed-loop constraint satisfaction and convergence to an optimal configuration. Furthermore, all methods are tested and compared on hardware using a miniature car platform.
△ Less
Submitted 29 March, 2024; v1 submitted 17 March, 2023;
originally announced March 2023.
-
Multi-agent Distributed Model Predictive Control with Connectivity Constraint
Authors:
Andrea Carron,
Danilo Saccani,
Lorenzo Fagiano,
Melanie N. Zeilinger
Abstract:
In cooperative multi-agent robotic systems, coordination is necessary in order to complete a given task. Important examples include search and rescue, operations in hazardous environments, and environmental monitoring. Coordination, in turn, requires simultaneous satisfaction of safety critical constraints, in the form of state and input constraints, and a connectivity constraint, in order to ensu…
▽ More
In cooperative multi-agent robotic systems, coordination is necessary in order to complete a given task. Important examples include search and rescue, operations in hazardous environments, and environmental monitoring. Coordination, in turn, requires simultaneous satisfaction of safety critical constraints, in the form of state and input constraints, and a connectivity constraint, in order to ensure that at every time instant there exists a communication path between every pair of agents in the network. In this work, we present a model predictive controller that tackles the problem of performing multi-agent coordination while simultaneously satisfying safety critical and connectivity constraints. The former is formulated in the form of state and input constraints and the latter as a constraint on the second smallest eigenvalue of the associated communication graph Laplacian matrix, also known as Fiedler eigenvalue, which enforces the connectivity of the communication network. We propose a sequential quadratic programming formulation to solve the associated optimization problem that is amenable to distributed optimization, making the proposed solution suitable for control of multi-agent robotics systems relying on local computation. Finally, the effectiveness of the algorithm is highlighted with a numerical simulation.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Zero-Order Optimization for Gaussian Process-based Model Predictive Control
Authors:
Amon Lahr,
Andrea Zanelli,
Andrea Carron,
Melanie N. Zeilinger
Abstract:
By enabling constraint-aware online model adaptation, model predictive control using Gaussian process (GP) regression has exhibited impressive performance in real-world applications and received considerable attention in the learning-based control community. Yet, solving the resulting optimal control problem in real-time generally remains a major challenge, due to i) the increased number of augmen…
▽ More
By enabling constraint-aware online model adaptation, model predictive control using Gaussian process (GP) regression has exhibited impressive performance in real-world applications and received considerable attention in the learning-based control community. Yet, solving the resulting optimal control problem in real-time generally remains a major challenge, due to i) the increased number of augmented states in the optimization problem, as well as ii) computationally expensive evaluations of the posterior mean and covariance and their respective derivatives. To tackle these challenges, we employ i) a tailored Jacobian approximation in a sequential quadratic programming (SQP) approach, and combine it with ii) a parallelizable GP inference and automatic differentiation framework. Reducing the numerical complexity with respect to the state dimension $n_x$ for each SQP iteration from $\mathcal{O}(n_x^6)$ to $\mathcal{O}(n_x^3)$, and accelerating GP evaluations on a graphical processing unit, the proposed algorithm computes suboptimal, yet feasible solutions at drastically reduced computation times and exhibits favorable local convergence properties. Numerical experiments verify the scaling properties and investigate the runtime distribution across different parts of the algorithm.
△ Less
Submitted 13 June, 2023; v1 submitted 28 November, 2022;
originally announced November 2022.
-
Bayesian Multi-Task Learning MPC for Robotic Mobile Manipulation
Authors:
Elena Arcari,
Maria Vittoria Minniti,
Anna Scampicchio,
Andrea Carron,
Farbod Farshidian,
Marco Hutter,
Melanie N. Zeilinger
Abstract:
Mobile manipulation in robotics is challenging due to the need of solving many diverse tasks, such as opening a door or picking-and-placing an object. Typically, a basic first-principles system description of the robot is available, thus motivating the use of model-based controllers. However, the robot dynamics and its interaction with an object are affected by uncertainty, limiting the controller…
▽ More
Mobile manipulation in robotics is challenging due to the need of solving many diverse tasks, such as opening a door or picking-and-placing an object. Typically, a basic first-principles system description of the robot is available, thus motivating the use of model-based controllers. However, the robot dynamics and its interaction with an object are affected by uncertainty, limiting the controller's performance. To tackle this problem, we propose a Bayesian multi-task learning model that uses trigonometric basis functions to identify the error in the dynamics. In this way, data from different but related tasks can be leveraged to provide a descriptive error model that can be efficiently updated online for new, unseen tasks. We combine this learning scheme with a model predictive controller, and extensively test the effectiveness of the proposed approach, including comparisons with available baseline controllers. We present simulation tests with a ball-balancing robot, and door-opening hardware experiments with a quadrupedal manipulator.
△ Less
Submitted 21 March, 2023; v1 submitted 18 November, 2022;
originally announced November 2022.
-
Chronos and CRS: Design of a miniature car-like robot and a software framework for single and multi-agent robotics and control
Authors:
Andrea Carron,
Sabrina Bodmer,
Lukas Vogel,
René Zurbrügg,
David Helm,
Rahel Rickenbach,
Simon Muntwiler,
Jerome Sieber,
Melanie N. Zeilinger
Abstract:
From both an educational and research point of view, experiments on hardware are a key aspect of robotics and control. In the last decade, many open-source hardware and software frameworks for wheeled robots have been presented, mainly in the form of unicycles and car-like robots, with the goal of making robotics accessible to a wider audience and to support control systems development. Unicycles…
▽ More
From both an educational and research point of view, experiments on hardware are a key aspect of robotics and control. In the last decade, many open-source hardware and software frameworks for wheeled robots have been presented, mainly in the form of unicycles and car-like robots, with the goal of making robotics accessible to a wider audience and to support control systems development. Unicycles are usually small and inexpensive, and therefore facilitate experiments in a larger fleet, but they are not suited for high-speed motion. Car-like robots are more agile, but they are usually larger and more expensive, thus requiring more resources in terms of space and money. In order to bridge this gap, we present Chronos, a new car-like 1/28th scale robot with customized open-source electronics, and CRS, an open-source software framework for control and robotics. The CRS software framework includes the implementation of various state-of-the-art algorithms for control, estimation, and multi-agent coordination. With this work, we aim to provide easier access to hardware and reduce the engineering time needed to start new educational and research projects.
△ Less
Submitted 17 November, 2023; v1 submitted 24 September, 2022;
originally announced September 2022.
-
Stochastic MPC with robustness to bounded parametric uncertainty
Authors:
Elena Arcari,
Andrea Iannelli,
Andrea Carron,
Melanie N. Zeilinger
Abstract:
The performance of model-based control techniques strongly depends on the quality of the employed dynamics model. If strong guarantees are desired, it is therefore common to robustly treat all possible sources of uncertainty, such as model inaccuracies or external disturbances. This, however, can result in overly conservative control strategies. In this paper, we present a stochastic model predict…
▽ More
The performance of model-based control techniques strongly depends on the quality of the employed dynamics model. If strong guarantees are desired, it is therefore common to robustly treat all possible sources of uncertainty, such as model inaccuracies or external disturbances. This, however, can result in overly conservative control strategies. In this paper, we present a stochastic model predictive control approach for discrete-time LTI systems subject to bounded parametric uncertainty and potentially unbounded stochastic additive noise. The proposed scheme makes use of homothetic tubes along the prediction horizon for a robust treatment of parametric uncertainty. Stochastic noise is handled by non-conservatively tightening constraints using the concept of probabilistic reachable sets (PRS). In order to accommodate all possible parametric uncertainties, we provide a strategy for generating "robustified" PRS based only on first and second moments of the noise sequence. In the case of quadratic cost functions, and under a further i.i.d. assumption on the noise distribution, we also provide an average asymptotic performance bound for the l2-norm of the closed-loop state. Finally, we demonstrate our scheme on both an illustrative example, and in a building temperature control problem.
△ Less
Submitted 20 May, 2022;
originally announced May 2022.
-
Model Learning and Contextual Controller Tuning for Autonomous Racing
Authors:
Lukas P. Fröhlich,
Christian Küttel,
Elena Arcari,
Lukas Hewing,
Melanie N. Zeilinger,
Andrea Carron
Abstract:
Model predictive control has been widely used in the field of autonomous racing and many data-driven approaches have been proposed to improve the closed-loop performance and to minimize lap time. However, it is often overlooked that a change in the environmental conditions, e.g., when it starts raining, it is not only required to adapt the predictive model but also the controller parameters need t…
▽ More
Model predictive control has been widely used in the field of autonomous racing and many data-driven approaches have been proposed to improve the closed-loop performance and to minimize lap time. However, it is often overlooked that a change in the environmental conditions, e.g., when it starts raining, it is not only required to adapt the predictive model but also the controller parameters need to be adjusted. In this paper, we address this challenge with the goal of requiring only few data. The key novelty of the proposed approach is that we leverage the learned dynamics model to encode the environmental condition as context. This insight allows us to employ contextual Bayesian optimization, thus accelerating the controller tuning problem when the environment changes and to transfer knowledge across different cars. The proposed framework is validated on an experimental platform with 1:28 scale RC race cars. We perform an extensive evaluation with more than 2'000 driven laps demonstrating that our approach successfully optimizes the lap time across different contexts faster compared to standard Bayesian optimization.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
Design, Optimal Guidance and Control of a Low-cost Re-usable Electric Model Rocket
Authors:
Lukas Spannagl,
Elias Hampp,
Andrea Carron,
Jerome Sieber,
Carlo Alberto Pascucci,
Aldo U. Zgraggen,
Alexander Domahidi,
Melanie N. Zeilinger
Abstract:
In the last decade, autonomous vertical take-off and landing (VTOL) vehicles have become increasingly important as they lower mission costs thanks to their re-usability. However, their development is complex, rendering even the basic experimental validation of the required advanced guidance and control (G & C) algorithms prohibitively time-consuming and costly. In this paper, we present the design…
▽ More
In the last decade, autonomous vertical take-off and landing (VTOL) vehicles have become increasingly important as they lower mission costs thanks to their re-usability. However, their development is complex, rendering even the basic experimental validation of the required advanced guidance and control (G & C) algorithms prohibitively time-consuming and costly. In this paper, we present the design of an inexpensive small-scale VTOL platform that can be built from off-the-shelf components for less than 1000 USD. The vehicle design mimics the first stage of a reusable launcher, making it a perfect test-bed for G & C algorithms. To control the vehicle during ascent and descent, we propose a real-time optimization-based G & C algorithm. The key features are a real-time minimum fuel and free-final-time optimal guidance combined with an offset-free tracking model predictive position controller. The vehicle hardware design and the G & C algorithm are experimentally validated both indoors and outdoor, showing reliable operation in a fully autonomous fashion with all computations done on-board and in real-time.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
A predictive safety filter for learning-based racing control
Authors:
Ben Tearle,
Kim P. Wabersich,
Andrea Carron,
Melanie N. Zeilinger
Abstract:
The growing need for high-performance controllers in safety-critical applications like autonomous driving has been motivating the development of formal safety verification techniques. In this paper, we design and implement a predictive safety filter that is able to maintain vehicle safety with respect to track boundaries when paired alongside any potentially unsafe control signal, such as those fo…
▽ More
The growing need for high-performance controllers in safety-critical applications like autonomous driving has been motivating the development of formal safety verification techniques. In this paper, we design and implement a predictive safety filter that is able to maintain vehicle safety with respect to track boundaries when paired alongside any potentially unsafe control signal, such as those found in learning-based methods. A model predictive control (MPC) framework is used to create a minimally invasive algorithm that certifies whether a desired control input is safe and can be applied to the vehicle, or that provides an alternate input to keep the vehicle in bounds. To this end, we provide a principled procedure to compute a safe and invariant set for nonlinear dynamic bicycle models using efficient convex approximation techniques. To fully support an aggressive racing performance without conservative safety interventions, the safe set is extended in real-time through predictive control backup trajectories. Applications for assisted manual driving and deep imitation learning on a miniature remote-controlled vehicle demonstrate the safety filter's ability to ensure vehicle safety during aggressive maneuvers.
△ Less
Submitted 23 February, 2021;
originally announced February 2021.
-
Volume Control of Low-Cost Ventilator with Automatic Set-Point Adaptation
Authors:
Lukas Hewing,
Marcel Menner,
Nikolaos Tachatos,
Marianne Schmid Daners,
Cosima du Pasquier,
Thomas S. Lumpe,
Kristina Shea,
Andrea Carron,
Melanie N. Zeilinger
Abstract:
This paper considers the control design for a low-cost ventilator that is based on a manual resuscitator bag (also known as AmbuBag) to pump air into the lungs of a patient who is physically unable to breathe. First, it experimentally shows that for accurately tracking tidal volumes, the controller needs to be adapted to the individual patient and the different configurations, e.g., hardware or op…
▽ More
This paper considers the control design for a low-cost ventilator that is based on a manual resuscitator bag (also known as AmbuBag) to pump air into the lungs of a patient who is physically unable to breathe. First, it experimentally shows that for accurately tracking tidal volumes, the controller needs to be adapted to the individual patient and the different configurations, e.g., hardware or operation modes. Second, it proposes a set-point adaptation algorithm that uses sensor measurements of a flow meter to automatically adapt the controller to the setup at hand. Third, it experimentally shows that such an adaptive solution improves the performance of the ventilator for various setups. One objective of this paper is to increase awareness of the need for feedback control using sensor measurements in low-cost ventilator solutions in order to automatically adapt to the specific scenario.
△ Less
Submitted 3 September, 2020;
originally announced September 2020.
-
Meta Learning MPC using Finite-Dimensional Gaussian Process Approximations
Authors:
Elena Arcari,
Andrea Carron,
Melanie N. Zeilinger
Abstract:
Data availability has dramatically increased in recent years, driving model-based control methods to exploit learning techniques for improving the system description, and thus control performance. Two key factors that hinder the practical applicability of learning methods in control are their high computational complexity and limited generalization capabilities to unseen conditions. Meta-learning…
▽ More
Data availability has dramatically increased in recent years, driving model-based control methods to exploit learning techniques for improving the system description, and thus control performance. Two key factors that hinder the practical applicability of learning methods in control are their high computational complexity and limited generalization capabilities to unseen conditions. Meta-learning is a powerful tool that enables efficient learning across a finite set of related tasks, easing adaptation to new unseen tasks. This paper makes use of a meta-learning approach for adaptive model predictive control, by learning a system model that leverages data from previous related tasks, while enabling fast fine-tuning to the current task during closed-loop operation. The dynamics is modeled via Gaussian process regression and, building on the Karhunen-Lo{è}ve expansion, can be approximately reformulated as a finite linear combination of kernel eigenfunctions. Using data collected over a set of tasks, the eigenfunction hyperparameters are optimized in a meta-training phase by maximizing a variational bound for the log-marginal likelihood. During meta-testing, the eigenfunctions are fixed, so that only the linear parameters are adapted to the new unseen task in an online adaptive fashion via Bayesian linear regression, providing a simple and efficient inference scheme. Simulation results are provided for autonomous racing with miniature race cars adapting to unseen road conditions.
△ Less
Submitted 21 November, 2022; v1 submitted 13 August, 2020;
originally announced August 2020.
-
Distributed Safe Learning using an Invariance-based Safety Framework
Authors:
Andrea Carron,
Jerome Sieber,
Melanie N. Zeilinger
Abstract:
In large-scale networks of uncertain dynamical systems, where communication is limited and there is a strong interaction among subsystems, learning local models and control policies offers great potential for designing high-performance controllers. At the same time, the lack of safety guarantees, here considered in the form of constraint satisfaction, prevents the use of data-driven techniques to…
▽ More
In large-scale networks of uncertain dynamical systems, where communication is limited and there is a strong interaction among subsystems, learning local models and control policies offers great potential for designing high-performance controllers. At the same time, the lack of safety guarantees, here considered in the form of constraint satisfaction, prevents the use of data-driven techniques to safety-critical distributed systems. This paper presents a safety framework that guarantees constraint satisfaction for uncertain distributed systems while learning. The framework considers linear systems with coupling in the dynamics and subject to bounded parametric uncertainty, and makes use of robust invariance to guarantee safety. In particular, a robust non-convex invariant set, given by the union of multiple ellipsoidal invariant sets, and a nonlinear backup control law, given by the combination of multiple stabilizing linear feedbacks, are computed offline. In presence of unsafe inputs, the safety framework applies the backup control law, preventing the system to violate the constraints. As the robust invariant set and the backup stabilizing controller are computed offline, the online operations reduce to simple function evaluations, which enables the use of the proposed framework on systems with limited computational resources. The capabilities of the safety framework are illustrated by three numerical examples.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Distributed Model Predictive Safety Certification for Learning-based Control
Authors:
Simon Muntwiler,
Kim P. Wabersich,
Andrea Carron,
Melanie N. Zeilinger
Abstract:
While distributed algorithms provide advantages for the control of complex large-scale systems by requiring a lower local computational load and less local memory, it is a challenging task to design high-performance distributed control policies. Learning-based control algorithms offer promising opportunities to address this challenge, but generally cannot guarantee safety in terms of state and inp…
▽ More
While distributed algorithms provide advantages for the control of complex large-scale systems by requiring a lower local computational load and less local memory, it is a challenging task to design high-performance distributed control policies. Learning-based control algorithms offer promising opportunities to address this challenge, but generally cannot guarantee safety in terms of state and input constraint satisfaction. A recently proposed safety framework for centralized linear systems ensures safety by matching the learning-based input online with the initial input of a model predictive control law capable of driving the system to a terminal set known to be safe. We extend this idea to derive a distributed model predictive safety certification (DMPSC) scheme, which is able to ensure state and input constraint satisfaction when applying any learning-based control algorithm to an uncertain distributed linear system with dynamic couplings. The scheme is based on a distributed tube-based model predictive control (MPC) concept, where subsystems negotiate local tube sizes among neighbors in order to mitigate restrictiveness of the safety approach. In addition, we present a technique for generating a structured ellipsoidal robust positive invariant tube. In numerical simulations, we show that the safety framework ensures constraint satisfaction for an initially unsafe control policy and allows to improve overall control performance compared to robust distributed MPC.
△ Less
Submitted 30 September, 2021; v1 submitted 5 November, 2019;
originally announced November 2019.
-
Probabilistic model predictive safety certification for learning-based control
Authors:
Kim P. Wabersich,
Lukas Hewing,
Andrea Carron,
Melanie N. Zeilinger
Abstract:
Reinforcement learning (RL) methods have demonstrated their efficiency in simulation environments. However, many applications for which RL offers great potential, such as autonomous driving, are also safety critical and require a certified closed-loop behavior in order to meet safety specifications in the presence of physical constraints. This paper introduces a concept, called probabilistic model…
▽ More
Reinforcement learning (RL) methods have demonstrated their efficiency in simulation environments. However, many applications for which RL offers great potential, such as autonomous driving, are also safety critical and require a certified closed-loop behavior in order to meet safety specifications in the presence of physical constraints. This paper introduces a concept, called probabilistic model predictive safety certification (PMPSC), which can be combined with any RL algorithm and provides provable safety certificates in terms of state and input chance constraints for potentially large-scale systems. The certificate is realized through a stochastic tube that safely connects the current system state with a terminal set of states, that is known to be safe. A novel formulation in terms of a convex receding horizon problem allows a recursively feasible real-time computation of such probabilistic tubes, despite the presence of possibly unbounded disturbances. A design procedure for PMPSC relying on bayesian inference and recent advances in probabilistic set invariance is presented. Using a numerical car simulation, the method and its design procedure are illustrated by enhancing a simple RL algorithm with safety certificates.
△ Less
Submitted 18 January, 2021; v1 submitted 25 June, 2019;
originally announced June 2019.
-
Efficient Spatio-Temporal Gaussian Regression via Kalman Filtering
Authors:
Marco Todescato,
Andrea Carron,
Ruggero Carli,
Gianluigi Pillonetto,
Luca Schenato
Abstract:
In this work we study the non-parametric reconstruction of spatio-temporal dynamical Gaussian processes (GPs) via GP regression from sparse and noisy data. GPs have been mainly applied to spatial regression where they represent one of the most powerful estimation approaches also thanks to their universal representing properties. Their extension to dynamical processes has been instead elusive so fa…
▽ More
In this work we study the non-parametric reconstruction of spatio-temporal dynamical Gaussian processes (GPs) via GP regression from sparse and noisy data. GPs have been mainly applied to spatial regression where they represent one of the most powerful estimation approaches also thanks to their universal representing properties. Their extension to dynamical processes has been instead elusive so far since classical implementations lead to unscalable algorithms. We then propose a novel procedure to address this problem by coupling GP regression and Kalman filtering. In particular, assuming space/time separability of the covariance (kernel) of the process and rational time spectrum, we build a finite-dimensional discrete-time state-space process representation amenable of Kalman filtering. With sampling over a finite set of fixed spatial locations, our major finding is that the Kalman filter state at instant $t_k$ represents a sufficient statistic to compute the minimum variance estimate of the process at any $t \geq t_k$ over the entire spatial domain. This result can be interpreted as a novel Kalman representer theorem for dynamical GPs. We then extend the study to situations where the set of spatial input locations can vary over time. The proposed algorithms are finally tested on both synthetic and real field data, also providing comparisons with standard GP and truncated GP regression techniques.
△ Less
Submitted 3 May, 2017;
originally announced May 2017.
-
Multi-agents adaptive estimation and coverage control using Gaussian regression
Authors:
Andrea Carron,
Marco Todescato,
Ruggero Carli,
Luca Schenato,
Gianluigi Pillonetto
Abstract:
We consider a scenario where the aim of a group of agents is to perform the optimal coverage of a region according to a sensory function. In particular, centroidal Voronoi partitions have to be computed. The difficulty of the task is that the sensory function is unknown and has to be reconstructed on line from noisy measurements. Hence, estimation and coverage needs to be performed at the same tim…
▽ More
We consider a scenario where the aim of a group of agents is to perform the optimal coverage of a region according to a sensory function. In particular, centroidal Voronoi partitions have to be computed. The difficulty of the task is that the sensory function is unknown and has to be reconstructed on line from noisy measurements. Hence, estimation and coverage needs to be performed at the same time. We cast the problem in a Bayesian regression framework, where the sensory function is seen as a Gaussian random field. Then, we design a set of control inputs which try to well balance coverage and estimation, also discussing convergence properties of the algorithm. Numerical experiments show the effectivness of the new approach.
△ Less
Submitted 22 July, 2014;
originally announced July 2014.