Showing 1–21 of 21 results for author: Carpenter, R

Letter to the Editor: What are the legal and ethical considerations of submitting radiology reports to ChatGPT?

Authors: Siddharth Agarwal, David Wood, Robin Carpenter, Yiran Wei, Marc Modat, Thomas C Booth

Abstract: This letter critically examines the recent article by Infante et al. assessing the utility of large language models (LLMs) like GPT-4, Perplexity, and Bard in identifying urgent findings in emergency radiology reports. While acknowledging the potential of LLMs in generating labels for computer vision, concerns are raised about the ethical implications of using patient data without explicit approva… ▽ More This letter critically examines the recent article by Infante et al. assessing the utility of large language models (LLMs) like GPT-4, Perplexity, and Bard in identifying urgent findings in emergency radiology reports. While acknowledging the potential of LLMs in generating labels for computer vision, concerns are raised about the ethical implications of using patient data without explicit approval, highlighting the necessity of stringent data protection measures under GDPR. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Multiple imputation of partially observed data after treatment-withdrawal

Authors: Suzie Cro, James H Roger, James R Carpenter

Abstract: The ICH E9(R1) Addendum (International Council for Harmonization 2019) suggests treatment-policy as one of several strategies for addressing intercurrent events such as treatment withdrawal when defining an estimand. This strategy requires the monitoring of patients and collection of primary outcome data following termination of randomized treatment. However, when patients withdraw from a study be… ▽ More The ICH E9(R1) Addendum (International Council for Harmonization 2019) suggests treatment-policy as one of several strategies for addressing intercurrent events such as treatment withdrawal when defining an estimand. This strategy requires the monitoring of patients and collection of primary outcome data following termination of randomized treatment. However, when patients withdraw from a study before nominal completion this creates true missing data complicating the analysis. One possible way forward uses multiple imputation to replace the missing data based on a model for outcome on and off treatment prior to study withdrawal, often referred to as retrieved dropout multiple imputation. This article explores a novel approach to parameterizing this imputation model so that those parameters which may be difficult to estimate have mildly informative Bayesian priors applied during the imputation stage. A core reference-based model is combined with a compliance model, using both on- and off- treatment data to form an extended model for the purposes of imputation. This alleviates the problem of specifying a complex set of analysis rules to accommodate situations where parameters which influence the estimated value are not estimable or are poorly estimated, leading to unrealistically large standard errors in the resulting analysis. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Comments: 16 pages, 5 tables

A quantum sensing metrology for magnetic memories

Authors: Vicent J Borràs, Robert Carpenter, Liza Žaper, Siddharth Rao, Sébastien Couet, Mathieu Munsch, Patrick Maletinsky, Peter Rickhaus

Abstract: Magnetic random access memory (MRAM) is a leading emergent memory technology that is poised to replace current non-volatile memory technologies such as eFlash. However, the scaling of MRAM technologies is heavily affected by device-to-device variability rooted in the stochastic nature of the MRAM writing process into nanoscale magnetic layers. Here, we introduce a non-contact metrology technique d… ▽ More Magnetic random access memory (MRAM) is a leading emergent memory technology that is poised to replace current non-volatile memory technologies such as eFlash. However, the scaling of MRAM technologies is heavily affected by device-to-device variability rooted in the stochastic nature of the MRAM writing process into nanoscale magnetic layers. Here, we introduce a non-contact metrology technique deploying Scanning NV Magnetometry (SNVM) to investigate MRAM performance at the individual bit level. We demonstrate magnetic reversal characterization in individual, < 60 nm sized bits, to extract key magnetic properties, thermal stability, and switching statistics, and thereby gauge bit-to-bit uniformity. We showcase the performance of our method by benchmarking two distinct bit etching processes immediately after pattern formation. Unlike previous methods, our approach unveils marked differences in switching behaviour of fully contacted MRAM devices stemming from these processes. Our findings highlight the potential of nanoscale quantum sensing of MRAM devices for early-stage screening in the processing line, paving the way for future incorporation of this nanoscale characterization tool in the semiconductor industry. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Two-Phase Flow Simulations of Surface Waves in Wind-Forced Conditions

Authors: Malte Loft, Niklas Kühl, Marc P. Buckley, Jeffrey R. Carpenter, Michael Hinze, Fabrice Veron, Thomas Rung

Abstract: The paper is devoted to two-phase flow simulations and investigates the ability of a diffusive interface Cahn-Hilliard Volume-of-Fluid model to capture the dynamics of the air-sea interface at geophysically relevant Reynolds numbers. It employs a hybrid filtered/averaging Improved Detached Eddy Simulation method to model turbulence, and utilizes a continuum model to account for surface tension if… ▽ More The paper is devoted to two-phase flow simulations and investigates the ability of a diffusive interface Cahn-Hilliard Volume-of-Fluid model to capture the dynamics of the air-sea interface at geophysically relevant Reynolds numbers. It employs a hybrid filtered/averaging Improved Detached Eddy Simulation method to model turbulence, and utilizes a continuum model to account for surface tension if the diffuse interface is under-resolved by the grid. A numerical wind-wave tank is introduced to limit computational costs and results obtained for two wind-wave conditions are analyzed in comparison to experimental data at matched Reynolds numbers. The focus of the comparison is on both time-averaged and wave-coherent quantities, and includes pressure, velocity as well as modeled and resolved Reynolds stresses. In general, numerical predictions agree well with the experimental measurements and reproduce many wave-dependent flow features. Reynolds stresses near the water surface are found to be especially important in modulating the critical layer height. It is concluded that the diffusive interface approach proves to be a promising method for future studies of air-sea interface dynamics in geophysically relevant flows. △ Less

Submitted 20 December, 2022; originally announced December 2022.

A Polynomial Time Test to Detect Number with Many Exceptional Points

Authors: Ryan Carpenter, Charles L. Samuels

Abstract: For each algebraic number $α$ and each positive real number $t$, the $t$-metric Mahler measure $m_t(α)$ creates an extremal problem whose solution varies depending on the value of $t$. The second author studied the points $t$ at which the solution changes, called {\it exceptional points for $α$}. Although each algebraic number has only finitely many exceptional points, it is conjectured that, for… ▽ More For each algebraic number $α$ and each positive real number $t$, the $t$-metric Mahler measure $m_t(α)$ creates an extremal problem whose solution varies depending on the value of $t$. The second author studied the points $t$ at which the solution changes, called {\it exceptional points for $α$}. Although each algebraic number has only finitely many exceptional points, it is conjectured that, for every $N \in \mathbb N$, there exists a number having at least $N$ exceptional points. In this article, we describe a polynomial time algorithm for establishing the existence of numbers with at least $N$ exceptional points. Our work constitutes an improvement over the best known existing algorithm which requires exponential time. We apply our main result to show that there exist numbers with at least $37$ exceptional points, another improvement over previous work which was only able to reach $11$ exceptional points. △ Less

Submitted 1 November, 2021; originally announced November 2021.

Comments: 12 pages

MSC Class: 11G50; 11R04; 11B39; 11Y16; 15A06; 90C05

Journal ref: Int. J. Number Theory 17 (2021), no. 4, 973-990

A Bayesian Hidden Semi-Markov Model with Covariate-Dependent State Duration Parameters for High-Frequency Environmental Data

Authors: Shirley Rojas-Salazar, Erin M. Schliep, Christopher K. Wikle, Emily H. Stanley, Stephen R. Carpenter, Noah R. Lottig

Abstract: Environmental time series data observed at high frequencies can be studied with approaches such as hidden Markov and semi-Markov models (HMM and HSMM). HSMMs extend the HMM by explicitly modeling the time spent in each state. In a discrete-time HSMM, the duration in each state can be modeled with a zero-truncated Poisson distribution, where the duration parameter may be state-specific but constant… ▽ More Environmental time series data observed at high frequencies can be studied with approaches such as hidden Markov and semi-Markov models (HMM and HSMM). HSMMs extend the HMM by explicitly modeling the time spent in each state. In a discrete-time HSMM, the duration in each state can be modeled with a zero-truncated Poisson distribution, where the duration parameter may be state-specific but constant in time. We extend the HSMM by allowing the state-specific duration parameters to vary in time and model them as a function of known covariates observed over a period of time leading up to a state transition. In addition, we propose a data subsampling approach given that high-frequency data can violate the conditional independence assumption of the HSMM. We apply the model to high-frequency data collected by an instrumented buoy in Lake Mendota. We model the phycocyanin concentration, which is used in aquatic systems to estimate the relative abundance of blue-green algae, and identify important time-varying effects associated with the duration in each state. △ Less

Submitted 21 September, 2021; originally announced September 2021.

Comments: arXiv admin note: substantial text overlap with arXiv:2010.10739

Ge thin-films with tantalum diffusion-barriers for use in Nb-based superconductor technology

Authors: C. Kopas, S. Zhang, J. Gonzales, D. R. Queen, B. Wagner, R. W. Carpenter, N. Newman

Abstract: Germanium thin films are an excellent candidate for use as a low-loss dielectric in superconducting microwave resonators, a low-loss inter-layer metal wiring dielectric, and passivation layers in microwave and Josephson junction devices. In Ge/Nb structures deposited at 400 °C, we observe intermixing over as much as 20 nm. The addition of a 10 nm Ta diffusion barrier layer reduces the superconduct… ▽ More Germanium thin films are an excellent candidate for use as a low-loss dielectric in superconducting microwave resonators, a low-loss inter-layer metal wiring dielectric, and passivation layers in microwave and Josephson junction devices. In Ge/Nb structures deposited at 400 °C, we observe intermixing over as much as 20 nm. The addition of a 10 nm Ta diffusion barrier layer reduces the superconductor/dielectric intermixing to less than 5 nm and enhances the structural properties of deposited a-Ge layers based on Raman spectroscopy. Additionally, superconducting microwave resonators fabricated at room-temperature on crystalline Ge substrates with a Ta barrier layer show marked improvement in total and power-dependent two-level system microwave losses. △ Less

Submitted 26 April, 2021; originally announced April 2021.

Voltage-Gate Assisted Spin-Orbit Torque Magnetic Random Access Memory for High-Density and Low-Power Embedded Application

Authors: Y. C. Wu, K. Garello, W. Kim, M. Gupta, M. Perumkunnil, V. Kateel, S. Couet, R. Carpenter, S. Rao, S. Van Beek, K. K. Vudya Sethu, F. Yasin, D. Crotti, G. S. Kar

Abstract: Voltage-gate assisted spin-orbit torque (VGSOT) writing scheme combines the advantages from voltage control of magnetic anisotropy (VCMA) and spin-orbit torque (SOT) effects, enabling multiple benefits for magnetic random access memory (MRAM) applications. In this work, we give a complete description of VGSOT writing properties on perpendicular magnetic tunnel junction (pMTJ) devices, and we propo… ▽ More Voltage-gate assisted spin-orbit torque (VGSOT) writing scheme combines the advantages from voltage control of magnetic anisotropy (VCMA) and spin-orbit torque (SOT) effects, enabling multiple benefits for magnetic random access memory (MRAM) applications. In this work, we give a complete description of VGSOT writing properties on perpendicular magnetic tunnel junction (pMTJ) devices, and we propose a detailed methodology for its electrical characterization. The impact of gate assistance on the SOT switching characteristics are investigated using electrical pulses down to 400ps. The VCMA coefficient (ξ) extracted from current switching scheme is found to be the same as that from the magnetic field switch method, which is in the order of 15fJ/Vm for the 80nm to 150nm devices. Moreover, as expected from the pure electronic VCMA effect, ξ is revealed to be independent of the writing speed and gate length. We observe that SOT switching current characteristics are modified linearly with gate voltage (V_g), similar as for the magnetic properties. We interpret this linear behavior as the direct modification of perpendicular magnetic anisotropy (PMA) and nucleation energy induced by VCMA. At V_g = 1V, the SOT write current is decreased by 25%, corresponding to a 45% reduction in total energy down to 30fJ/bit at 400ps speed for the 80nm devices used in this study. Further, the device-scaling criteria are proposed, and we reveal that VGSOT scheme is of great interest as it can mitigate the complex material requirements of achieving high SOT and VCMA parameters for scaled MTJs. Finally, how that VGSOT-MRAM can enable high-density arrays close to two terminal geometries, with high-speed performance and low-power operation, showing great potential for embedded memories as well as in-memory computing applications at advanced technology nodes. △ Less

Submitted 19 April, 2021; originally announced April 2021.

Journal ref: Phys. Rev. Applied 15, 064015 (2021)

Magnonic band structure in vertical meander-shaped CoFeB thin films

Authors: Gianluca Gubbiotti, Alexandr Sadovnikov, Evgeny Beginin, Sergey Nikitov, Danny Wan, Anshul Gupta, Shreya Kundu, Giacomo Talmelli, Robert Carpenter, Inge Asselberghs, Iuliana P. Radu, Christoph Adelmann, Florin Ciubotaru

Abstract: The dispersion of spin waves in vertical meander-shaped CoFeB thin films consisting of segments located at 90° angles with respect to each other is investigated by Brillouin light scattering spectroscopy. We reveal the periodic character of several dispersive branches as well as alternating frequency ranges where spin waves are allowed or forbidden to propagate. Noteworthy is the presence of the f… ▽ More The dispersion of spin waves in vertical meander-shaped CoFeB thin films consisting of segments located at 90° angles with respect to each other is investigated by Brillouin light scattering spectroscopy. We reveal the periodic character of several dispersive branches as well as alternating frequency ranges where spin waves are allowed or forbidden to propagate. Noteworthy is the presence of the frequency band gaps between each couple of successive modes only for wave numbers k=n$π$/a, where n is an even integer number and a is the size of the meander unit cell, whereas the spectra show propagating modes in the orthogonal film segments for the other wavenumbers. The micromagnetic simulations and analytical calculations allow us to understand and explain the results in terms of the mode spatial localization and symmetry. The obtained results demonstrate the wave propagation in three dimensions opening the path for multi-level magnonic architectures for signal processing. △ Less

Submitted 27 April, 2021; v1 submitted 27 July, 2020; originally announced July 2020.

Comments: 19 pages, 6 figures. This work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 801055 "Spin Wave Computing for Ultimately-Scaled Hybrid Low-Power Electronics" - "CHIRON"

Journal ref: Phys. Rev. Applied 15, 014061 (2021)

Framework for the Treatment And Reporting of Missing data in Observational Studies: The TARMOS framework

Authors: Katherine J Lee, Kate Tilling, Rosie P Cornish, Roderick JA Little, Melanie L Bell, Els Goetghebeur, Joseph W Hogan, James R Carpenter

Abstract: Missing data are ubiquitous in medical research. Although there is increasing guidance on how to handle missing data, practice is changing slowly and misapprehensions abound, particularly in observational research. We present a practical framework for handling and reporting the analysis of incomplete data in observational studies, which we illustrate using a case study from the Avon Longitudinal S… ▽ More Missing data are ubiquitous in medical research. Although there is increasing guidance on how to handle missing data, practice is changing slowly and misapprehensions abound, particularly in observational research. We present a practical framework for handling and reporting the analysis of incomplete data in observational studies, which we illustrate using a case study from the Avon Longitudinal Study of Parents and Children. The framework consists of three steps: 1) Develop an analysis plan specifying the analysis model and how missing data are going to be addressed. An important consideration is whether a complete records analysis is likely to be valid, whether multiple imputation or an alternative approach is likely to offer benefits, and whether a sensitivity analysis regarding the missingness mechanism is required. 2) Explore the data, checking the methods outlined in the analysis plan are appropriate, and conduct the pre-planned analysis. 3) Report the results, including a description of the missing data, details on how the missing data were addressed, and the results from all analyses, interpreted in light of the missing data and the clinical relevance. This framework seeks to support researchers in thinking systematically about missing data, and transparently reporting the potential effect on the study results. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: 37 pages, including 3 Figures, 1 table and supplementary material

MSC Class: 6207

Chip Placement with Deep Reinforcement Learning

Authors: Azalia Mirhoseini, Anna Goldie, Mustafa Yazgan, Joe Jiang, Ebrahim Songhori, Shen Wang, Young-Joon Lee, Eric Johnson, Omkar Pathak, Sungmin Bae, Azade Nazi, Jiwoo Pak, Andy Tong, Kavya Srinivasa, William Hang, Emre Tuncer, Anand Babu, Quoc V. Le, James Laudon, Richard Ho, Roger Carpenter, Jeff Dean

Abstract: In this work, we present a learning-based approach to chip placement, one of the most complex and time-consuming stages of the chip design process. Unlike prior methods, our approach has the ability to learn from past experience and improve over time. In particular, as we train over a greater number of chip blocks, our method becomes better at rapidly generating optimized placements for previously… ▽ More In this work, we present a learning-based approach to chip placement, one of the most complex and time-consuming stages of the chip design process. Unlike prior methods, our approach has the ability to learn from past experience and improve over time. In particular, as we train over a greater number of chip blocks, our method becomes better at rapidly generating optimized placements for previously unseen chip blocks. To achieve these results, we pose placement as a Reinforcement Learning (RL) problem and train an agent to place the nodes of a chip netlist onto a chip canvas. To enable our RL policy to generalize to unseen blocks, we ground representation learning in the supervised task of predicting placement quality. By designing a neural architecture that can accurately predict reward across a wide variety of netlists and their placements, we are able to generate rich feature embeddings of the input netlists. We then use this architecture as the encoder of our policy and value networks to enable transfer learning. Our objective is to minimize PPA (power, performance, and area), and we show that, in under 6 hours, our method can generate placements that are superhuman or comparable on modern accelerator netlists, whereas existing baselines require human experts in the loop and take several weeks. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Anisotropy in Antiferromagnets

Authors: K O'Grady, J Sinclair, K Elphick, R Carpenter, G Vallejo-Fernandez, M I J Probert, A Hirohata

Abstract: Due to the advent of antiferromagnetic (AF) spintronics there is a burgeoning interest in AF materials for a wide range of potential and actual applications. Generally, AFs are characterized via the ordering at the Neel temperature (TN) but, to have a stable AF configuration, it is necessary that the material have a sufficient level of anisotropy so as to maintain the orientation of the given magn… ▽ More Due to the advent of antiferromagnetic (AF) spintronics there is a burgeoning interest in AF materials for a wide range of potential and actual applications. Generally, AFs are characterized via the ordering at the Neel temperature (TN) but, to have a stable AF configuration, it is necessary that the material have a sufficient level of anisotropy so as to maintain the orientation of the given magnetic state fixed in one direction. Unlike the case for ferromagnets there is little established data on the anisotropy of AFs and in particular its origins and those factors which control it. In this paper these factors are reviewed in the light of recent and established experimental data. Additionally, there is no recognized technique for the first principle determination of the anisotropy of an AF which can only be found indirectly via the exchange bias phenomenon. This technique is reviewed and in particular the implications for the nature of the anisotropy that is measured and its distribution. Finally, a strategy is proposed that would allow for the development of AF materials with controlled anisotropy for future applications. △ Less

Submitted 6 March, 2020; originally announced March 2020.

Comments: 20 pages, 11 figures, invited paper

The DURATIONS randomised trial design: estimation targets, analysis methods and operating characteristics

Authors: Matteo Quartagno, James R. Carpenter, A. Sarah Walker, Michelle Clements, Mahesh K. B. Parmar

Abstract: Background. Designing trials to reduce treatment duration is important in several therapeutic areas, including TB and antibiotics. We recently proposed a new randomised trial design to overcome some of the limitations of standard two-arm non-inferiority trials. This DURATIONS design involves randomising patients to a number of duration arms, and modelling the so-called duration-response curve. Thi… ▽ More Background. Designing trials to reduce treatment duration is important in several therapeutic areas, including TB and antibiotics. We recently proposed a new randomised trial design to overcome some of the limitations of standard two-arm non-inferiority trials. This DURATIONS design involves randomising patients to a number of duration arms, and modelling the so-called duration-response curve. This article investigates the operating characteristics (type-1 and type-2 errors) of different statistical methods of drawing inference from the estimated curve. Methods. Our first estimation target is the shortest duration non-inferior to the control (maximum) duration within a specific risk difference margin. We compare different methods of estimating this quantity, including using model confidence bands, the delta method and bootstrap. We then explore the generalisability of results to estimation targets which focus on absolute event rates, risk ratio and gradient of the curve. Results. We show through simulations that, in most scenarios and for most of the estimation targets, using the bootstrap to estimate variability around the target duration leads to good results for DURATIONS design-appropriate quantities analogous to power and type-1 error. Using model confidence bands is not recommended, while the delta method leads to inflated type-1 error in some scenarios, particularly when the optimal duration is very close to one of the randomised durations. Conclusions. Using the bootstrap to estimate the optimal duration in a DURATIONS design has good operating characteristics in a wide range of scenarios, and can be used with confidence by researchers wishing to design a DURATIONS trial to reduce treatment duration. Uncertainty around several different targets can be estimated with this bootstrap approach. △ Less

Submitted 25 February, 2020; originally announced February 2020.

Comments: 4 figures, 1 table + additional material

A review and evaluation of standard methods to handle missing data on time-varying confounders in marginal structural models

Authors: Clemence Leyrat, James R Carpenter, Sebastien Bailly, Elizabeth J Willamson

Abstract: Marginal structural models (MSMs) are commonly used to estimate causal intervention effects in longitudinal non-randomised studies. A common issue when analysing data from observational studies is the presence of incomplete confounder data, which might lead to bias in the intervention effect estimates if they are not handled properly in the statistical analysis. However, there is currently no reco… ▽ More Marginal structural models (MSMs) are commonly used to estimate causal intervention effects in longitudinal non-randomised studies. A common issue when analysing data from observational studies is the presence of incomplete confounder data, which might lead to bias in the intervention effect estimates if they are not handled properly in the statistical analysis. However, there is currently no recommendation on how to address missing data on covariates in MSMs under a variety of missingness mechanisms encountered in practice. We reviewed existing methods to handling missing data in MSMs and performed a simulation study to compare the performance of complete case (CC) analysis, the last observation carried forward (LOCF), the missingness pattern approach (MPA), multiple imputation (MI) and inverse-probability-of-missingness weighting (IPMW). We considered three mechanisms for non-monotone missing data which are common in observational studies using electronic health record data. Whereas CC analysis lead to biased estimates of the intervention effect in almost all scenarios, the performance of the other approaches varied across scenarios. The LOCF approach led to unbiased estimates only under a specific non-random mechanism in which confounder values were missing when their values remained unchanged since the previous measurement. In this scenario, MI, the MPA and IPMW were biased. MI and IPMW led to the estimation of unbiased effects when data were missing at random, given the covariates or the treatment but only MI was unbiased when the outcome was a predictor of missingness. Furthermore, IPMW generally lead to very large standard errors. Lastly, regardless of the missingness mechanism, the MPA led to unbiased estimates only when the failure to record a confounder at a given time-point modified the subsequent relationships between the partially observed covariate and the outcome. △ Less

Submitted 28 November, 2019; originally announced November 2019.

Manufacturable 300mm platform solution for Field-Free Switching SOT-MRAM

Authors: K. Garello, F. Yasin, H. Hody, S. Couet, L. Souriau, S. H. Sharifi, J. Swerts, R. Carpenter, S. Rao, W. Kim, J. Wu, K. K. V. Sethu, M. Pak, N. Jossart, D. Crotti, A. Furnémont, G. S. Kar

Abstract: We propose a field-free switching SOT-MRAM concept that is integration friendly and allows for separate optimization of the field component and SOT/MTJ stack properties. We demonstrate it on a 300 mm wafer, using CMOS-compatible processes, and we show that device performances are similar to our standard SOT-MTJ cells: reliable sub-ns switching with low writing power across the 300mm wafer. Our con… ▽ More We propose a field-free switching SOT-MRAM concept that is integration friendly and allows for separate optimization of the field component and SOT/MTJ stack properties. We demonstrate it on a 300 mm wafer, using CMOS-compatible processes, and we show that device performances are similar to our standard SOT-MTJ cells: reliable sub-ns switching with low writing power across the 300mm wafer. Our concept/design opens a new area for MRAM (SOT, STT and VCMA) technology development. △ Less

Submitted 30 August, 2019; v1 submitted 18 July, 2019; originally announced July 2019.

Comments: Presented at VLSI 2019 Circuit and Technology Symposium, JFS4p5

Journal ref: 2019 Symposium on VLSI Technology

Offset fields in perpendicularly magnetized tunnel junctions

Authors: T. Devolder, R. Carpenter, S. Rao, W. Kim, S. Couet, J. Swerts, G. S. Kar

Abstract: We study the offset fields affecting the free layer of perpendicularly magnetized tunnel junctions. In extended films, the free layer offset field results from interlayer exchange coupling with the reference layer through the MgO tunnel oxide. The free layer offset field is thus accompanied with a shift of the free layer and reference layer ferromagnetic resonance frequencies. The shifts depend on… ▽ More We study the offset fields affecting the free layer of perpendicularly magnetized tunnel junctions. In extended films, the free layer offset field results from interlayer exchange coupling with the reference layer through the MgO tunnel oxide. The free layer offset field is thus accompanied with a shift of the free layer and reference layer ferromagnetic resonance frequencies. The shifts depend on the mutual orientation of the two magnetizations. The offset field decreases with the resistance area product of the tunnel oxide. Patterning the tunnel junction into an STT-MRAM disk-shaped cell changes substantially the offset field, as the reduction of the lateral dimension comes with the generation of stray fields by the reference and the hard layer. The experimental offset field compares best with the spatial average of the sum of these stray fields, thereby providing guidelines for the offset field engineering. △ Less

Submitted 23 April, 2019; originally announced April 2019.

Comments: Special issue of J. Phys. D: Appl. Phys (2019) on STT-MRAM

Information-Anchored Sensitivity Analysis: Theory and Application

Authors: Suzie Cro, James R Carpenter, Michael G Kenward

Abstract: Analysis of longitudinal randomised controlled trials is frequently complicated because patients deviate from the protocol. Where such deviations are relevant for the estimand, we are typically required to make an untestable assumption about post-deviation behaviour in order to perform our primary analysis and estimate the treatment effect. In such settings, it is now widely recognised that we sho… ▽ More Analysis of longitudinal randomised controlled trials is frequently complicated because patients deviate from the protocol. Where such deviations are relevant for the estimand, we are typically required to make an untestable assumption about post-deviation behaviour in order to perform our primary analysis and estimate the treatment effect. In such settings, it is now widely recognised that we should follow this with sensitivity analyses to explore the robustness of our inferences to alternative assumptions about post-deviation behaviour. Although there has been a lot of work on how to conduct such sensitivity analyses, little attention has been given to the appropriate loss of information due to missing data within sensitivity analysis. We argue more attention needs to be given to this issue, showing it is quite possible for sensitivity analysis to decrease and increase the information about the treatment effect. To address this critical issue, we introduce the concept of information-anchored sensitivity analysis. By this we mean sensitivity analysis in which the proportion of information about the treatment estimate lost due to missing data is the same as the proportion of information about the treatment estimate lost due to missing data in the primary analysis. We argue this forms a transparent, practical starting point for interpretation of sensitivity analysis. We then derive results showing that, for longitudinal continuous data, a broad class of controlled and reference-based sensitivity analyses performed by multiple imputation are information-anchored. We illustrate the theory with simulations and an analysis of a peer review trial, then discuss our work in the context of other recent work in this area. Our results give a theoretical basis for the use of controlled multiple imputation procedures for sensitivity analysis. △ Less

Submitted 15 May, 2018; originally announced May 2018.

Population-calibrated multiple imputation for a binary/categorical covariate in categorical regression models

Authors: Tra My Pham, James R Carpenter, Tim P Morris, Angela M Wood, Irene Petersen

Abstract: Multiple imputation (MI) has become popular for analyses with missing data in medical research. The standard implementation of MI is based on the assumption of data being missing at random (MAR). However, for missing data generated by missing not at random (MNAR) mechanisms, MI performed assuming MAR might not be satisfactory. For an incomplete variable in a given dataset, its corresponding popula… ▽ More Multiple imputation (MI) has become popular for analyses with missing data in medical research. The standard implementation of MI is based on the assumption of data being missing at random (MAR). However, for missing data generated by missing not at random (MNAR) mechanisms, MI performed assuming MAR might not be satisfactory. For an incomplete variable in a given dataset, its corresponding population marginal distribution might also be available in an external data source. We show how this information can be readily utilised in the imputation model to calibrate inference to the population, by incorporating an appropriately calculated offset termed the `calibrated-$δ$ adjustment'. We describe the derivation of this offset from the population distribution of the incomplete variable and show how in applications it can be used to closely (and often exactly) match the post-imputation distribution to the population level. Through analytic and simulation studies, we show that our proposed calibrated-$δ$ adjustment MI method can give the same inference as standard MI when data are MAR, and can produce more accurate inference under two general MNAR missingness mechanisms. The method is used to impute missing ethnicity data in a type 2 diabetes prevalence case study using UK primary care electronic health records, where it results in scientifically relevant changes in inference for non-White ethnic groups compared to standard MI. Calibrated-$δ$ adjustment MI represents a pragmatic approach for utilising available population-level information in a sensitivity analysis to explore potential departure from the MAR assumption. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Re-thinking non-inferiority: a practical trial design for optimising treatment duration

Authors: Matteo Quartagno, A. Sarah Walker, James R. Carpenter, Patrick P. J. Phillips, Mahesh K. B. Parmar

Abstract: Background: trials to identify the minimal effective treatment duration are needed in different therapeutic areas, including bacterial infections, TB and Hepatitis--C. However, standard non-inferiority designs have several limitations, including arbitrariness of non-inferiority margins, choice of research arms and very large sample sizes. Methods: we recast the problem of finding an appropriate… ▽ More Background: trials to identify the minimal effective treatment duration are needed in different therapeutic areas, including bacterial infections, TB and Hepatitis--C. However, standard non-inferiority designs have several limitations, including arbitrariness of non-inferiority margins, choice of research arms and very large sample sizes. Methods: we recast the problem of finding an appropriate non-inferior treatment duration in terms of modelling the entire duration-response curve within a pre-specified range. We propose a multi-arm randomised trial design, allocating patients to different treatment durations. We use fractional polynomials and spline-based methods to flexibly model the duration-response curve. We compare different methods in terms of a scaled version of the area between true and estimated prediction curves. We evaluate sensitivity to key design parameters, including sample size, number and position of arms. Results: a total sample size of $\sim 500$ patients divided into a moderate number of equidistant arms (5-7) is sufficient to estimate the duration-response curve within a $5\%$ error margin in $95\%$ of the simulations. Fractional polynomials provide similar or better results than spline-based methods in most scenarios. Conclusions: our proposed practical randomised trial design is an alternative to standard non-inferiority designs, avoiding many of their limitations, and yet being fairly robust to different possible duration-response curves. The trial outcome is the whole duration-response curve, which could be used by clinicians and policy makers to make informed decisions, facilitating a move away from a forced binary hypothesis testing paradigm. △ Less

Submitted 5 February, 2018; originally announced February 2018.

Propensity score analysis with partially observed confounders: how should multiple imputation be used?

Authors: Clemence Leyrat, Shaun R. Seaman, Ian R. White, Ian Douglas, Liam Smeeth, Joseph Kim, Matthieu Resche-Rigon, James R. Carpenter, Elizabeth J. Williamson

Abstract: Inverse probability of treatment weighting (IPTW) is a popular propensity score (PS)-based approach to estimate causal effects in observational studies at risk of confounding bias. A major issue when estimating the PS is the presence of partially observed covariates. Multiple imputation (MI) is a natural approach to handle missing data on covariates, but its use in the PS context raises three impo… ▽ More Inverse probability of treatment weighting (IPTW) is a popular propensity score (PS)-based approach to estimate causal effects in observational studies at risk of confounding bias. A major issue when estimating the PS is the presence of partially observed covariates. Multiple imputation (MI) is a natural approach to handle missing data on covariates, but its use in the PS context raises three important questions: (i) should we apply Rubin's rules to the IPTW treatment effect estimates or to the PS estimates themselves? (ii) does the outcome have to be included in the imputation model? (iii) how should we estimate the variance of the IPTW estimator after MI? We performed a simulation study focusing on the effect of a binary treatment on a binary outcome with three confounders (two of them partially observed). We used MI with chained equations to create complete datasets and compared three ways of combining the results: combining treatment effect estimates (MIte); combining the PS across the imputed datasets (MIps); or combining the PS parameters and estimating the PS of the average covariates across the imputed datasets (MIpar). We also compared the performance of these methods to complete case (CC) analysis and the missingness pattern (MP) approach, a method which uses a different PS model for each pattern of missingness. We also studied empirically the consistency of these 3 MI estimators. Under a missing at random (MAR) mechanism, CC and MP analyses were biased in most cases when estimating the marginal treatment effect, whereas MI approaches had good performance in reducing bias as long as the outcome was included in the imputation model. However, only MIte was unbiased in all the studied scenarios and Rubin's rules provided good variance estimates for MIte. △ Less

Submitted 19 August, 2016; originally announced August 2016.

Comments: 54 pages

MSC Class: G.3

Multiple imputation of covariates by fully conditional specification: accommodating the substantive model

Authors: Jonathan W. Bartlett, Shaun R. Seaman, Ian R. White, James R. Carpenter

Abstract: Missing covariate data commonly occur in epidemiological and clinical research, and are often dealt with using multiple imputation (MI). Imputation of partially observed covariates is complicated if the substantive model is non-linear (e.g. Cox proportional hazards model), or contains non-linear (e.g. squared) or interaction terms, and standard software implementations of MI may impute covariates… ▽ More Missing covariate data commonly occur in epidemiological and clinical research, and are often dealt with using multiple imputation (MI). Imputation of partially observed covariates is complicated if the substantive model is non-linear (e.g. Cox proportional hazards model), or contains non-linear (e.g. squared) or interaction terms, and standard software implementations of MI may impute covariates from models that are incompatible with such substantive models. We show how imputation by fully conditional specification, a popular approach for performing MI, can be modified so that covariates are imputed from models which are compatible with the substantive model. We investigate through simulation the performance of this proposal, and compare it to existing approaches. Simulation results suggest our proposal gives consistent estimates for a range of common substantive models, including models which contain non-linear covariate effects or interactions, provided data are missing at random and the assumed imputation models are correctly specified and mutually compatible. △ Less

Submitted 17 January, 2013; v1 submitted 25 October, 2012; originally announced October 2012.

Comments: In the original version we defined the concept of congeniality differently from Meng (1994). In this revised version we refrain from using the term congeniality, and instead refer only to compatibility between imputation and substantive models. In the discussion we explain how imputation and substantive model compatibility and congeniality are related