Showing 1–12 of 12 results for author: Cardin, J

Improving the long-term stability of new-generation perovskite-based TCO using binary and ternary oxides cap** layers

Authors: Moussa Mezhoud, Martando Rath, Stéphanie Gascoin, Sylvain Duprey, Philippe Marie, Julien Cardin, Christophe Labbé, Wilfrid Prellier, Ulrike Lüders

Abstract: We report the impact of cap** layers on vanadate based transparent conductive oxides (TCOs) to prolong the thermal stability with a minimal loss of resistivity during heat treatment in ambient environment. In the present study, various protecting layers (amorphous Al2O3, LaAlO3 (LAO), TiO2 grown in base pressure and TiO2 deposited under oxygen partial pressure) are grown in-situ on polycrystalli… ▽ More We report the impact of cap** layers on vanadate based transparent conductive oxides (TCOs) to prolong the thermal stability with a minimal loss of resistivity during heat treatment in ambient environment. In the present study, various protecting layers (amorphous Al2O3, LaAlO3 (LAO), TiO2 grown in base pressure and TiO2 deposited under oxygen partial pressure) are grown in-situ on polycrystalline perovskite SrVO3 (SVO) thin films using Pulsed Laser Deposition (PLD). The results show that amorphous LaAlO3 is the most promising protection layer among the oxide layers, to preserve both electrical and optical properties of perovskite SVO films from natural as well as artificial aging. Our present approach for a cap** layer on SVO may address the long-term stability issues of correlated TCOs and would open an opportunity for the future oxide electronics applications. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Artificial ageing of thin films of the indium-free transparent conducting oxide SrVO3

Authors: M. Rath, M. Mezhoud, O. El Khaloufi, O. Lebedev, J. Cardin, Ch. Labbé, F. Gourbilleau, V. Polewczyk, G. Vinai, P. Torelli, A. Fouchet, A. David, W. Prellier, U. Lüders

Abstract: SrVO3 (SVO) is a prospective candidate to replace the conventional indium-tin-oxide (ITO) among the new transparent conducting oxide (TCO) generation. In this study, the structural, electrical, and optical properties of SVO thin films, both epitaxial and polycrystalline, are determined during and after heat treatments in the 150-250 °C range and under ambient environment in order to explore the ch… ▽ More SrVO3 (SVO) is a prospective candidate to replace the conventional indium-tin-oxide (ITO) among the new transparent conducting oxide (TCO) generation. In this study, the structural, electrical, and optical properties of SVO thin films, both epitaxial and polycrystalline, are determined during and after heat treatments in the 150-250 °C range and under ambient environment in order to explore the chemical stability of this material. The use of these relatively low temperatures speeds up the natural ageing of the films, and allows to follow the evolution of their related properties. The combination of techniques rather sensitive to the film surface and of techniques sampling the film volume will emphasize the presence of a surface oxidation evolving in time at low annealing temperatures, whereas the perovskite phase is destroyed throughout the film for treatments above 200 °C. The present study is designed to understand the thermal degradation and long-term stability issues of vanadate-based TCOs, and to identify technologically viable solutions for the application of this group as new TCOs. △ Less

Submitted 15 March, 2023; originally announced March 2023.

Neural Integro-Differential Equations

Authors: Emanuele Zappala, Antonio Henrique de Oliveira Fonseca, Andrew Henry Moberly, Michael James Higley, Chadi Abdallah, Jessica Cardin, David van Dijk

Abstract: Modeling continuous dynamical systems from discretely sampled observations is a fundamental problem in data science. Often, such dynamics are the result of non-local processes that present an integral over time. As such, these systems are modeled with Integro-Differential Equations (IDEs); generalizations of differential equations that comprise both an integral and a differential component. For ex… ▽ More Modeling continuous dynamical systems from discretely sampled observations is a fundamental problem in data science. Often, such dynamics are the result of non-local processes that present an integral over time. As such, these systems are modeled with Integro-Differential Equations (IDEs); generalizations of differential equations that comprise both an integral and a differential component. For example, brain dynamics are not accurately modeled by differential equations since their behavior is non-Markovian, i.e. dynamics are in part dictated by history. Here, we introduce the Neural IDE (NIDE), a novel deep learning framework based on the theory of IDEs where integral operators are learned using neural networks. We test NIDE on several toy and brain activity datasets and demonstrate that NIDE outperforms other models. These tasks include time extrapolation as well as predicting dynamics from unseen initial conditions, which we test on whole-cortex activity recordings in freely behaving mice. Further, we show that NIDE can decompose dynamics into their Markovian and non-Markovian constituents via the learned integral operator, which we test on fMRI brain activity recordings of people on ketamine. Finally, the integrand of the integral operator provides a latent space that gives insight into the underlying dynamics, which we demonstrate on wide-field brain imaging recordings. Altogether, NIDE is a novel approach that enables modeling of complex non-local dynamics with neural networks. △ Less

Submitted 29 November, 2022; v1 submitted 28 June, 2022; originally announced June 2022.

Comments: 18 pages (including 8 pages Appendix), 8 figures and 6 tables. v4: Final version with reviewers' comments included, to appear in AAAI-23 (up to formatting differences)

The Nitrogen concentration effect on Ce doped SiOxNy emission: towards optimized Ce3+ for DEL applications

Authors: F Ehré, C. Labbé, C Dufour, W Jadwisienczak, J. Weimmerskirch-Aubatin, X Portier, J. -L Doualan, J Cardin, A. Richard, D Ingram, C Labrugère, F Gourbilleau

Abstract: Ce-doped SiO x N y films are deposited by magnetron reactive sputtering from a CeO 2 target under nitrogen reactive gas atmosphere. Visible photoluminescence measurements regarding the nitrogen gas flow reveal a large emission band centered at 450 nm for a sample deposited under a 2 sccm flow. A special attention is paid to the origin of such an emission at high nitrogen concentration. Different e… ▽ More Ce-doped SiO x N y films are deposited by magnetron reactive sputtering from a CeO 2 target under nitrogen reactive gas atmosphere. Visible photoluminescence measurements regarding the nitrogen gas flow reveal a large emission band centered at 450 nm for a sample deposited under a 2 sccm flow. A special attention is paid to the origin of such an emission at high nitrogen concentration. Different emitting centers are suggested in Ce doped SiO x N y films (e.g. band tails, CeO 2, Ce clusters, Ce 3+ ions), with different activation scenarios to explain the luminescence. X-ray photoelectron spectroscopy (XPS) reveals the exclusive presence of Ce 3+ ions whatever the nitrogen or Ce concentrations, while transmission electron microscopy (TEM) shows no clusters or silicates upon high temperature annealing. With the help of photoluminescence excitation spectroscopy (PLE), a wide excitation range from 250 nm up to 400 nm is revealed and various excitations of Ce 3+ ions are proposed involving direct or indirect mechanisms. Nitrogen concentration plays an important role on Ce 3+ emission by modifying Ce surroundings, reducing the Si phase volume in SiO x N y and causing a nephelauxetic effect. Taking into account the optimized nitrogen growth parameters, the Ce concentration is analyzed as new parameter. Under UV excitation, a strong emission is visible to the naked eye with high Ce 3+ concentration (6 at. %). No saturation of the photoluminescence intensity is observed, confirming again the lack of Ce cluster or silicate phase formation due do the nitrogen presence. △ Less

Submitted 10 September, 2018; v1 submitted 26 January, 2018; originally announced January 2018.

Comments: Nanoscale, Royal Society of Chemistry, 2018

Structural and emission properties of Tb3+-doped nitrogen-rich silicon oxynitride films

Authors: Christophe Labbe, Yong-Tao An, Grzegorz Zatryb, Xavier Portier, Artur Podhorodecki, Philippe Marie, Cedric Frilay, J. Cardin, Fabrice Gourbilleau

Abstract: Terbium doped silicon oxynitride host matrix is suitable for various applications such as light emitters compatible with CMOS technology or frequency converter systems for photovoltaic cells. In this study, amorphous Tb3+ ion doped nitrogen-rich silicon oxynitride (NRSON) thin films were fabricated using a reactive magnetron co-sputtering method, with various N2 flows and annealing conditions, in… ▽ More Terbium doped silicon oxynitride host matrix is suitable for various applications such as light emitters compatible with CMOS technology or frequency converter systems for photovoltaic cells. In this study, amorphous Tb3+ ion doped nitrogen-rich silicon oxynitride (NRSON) thin films were fabricated using a reactive magnetron co-sputtering method, with various N2 flows and annealing conditions, in order to study their structural and emission properties. Rutherford backscattering (RBS) measurements and refractive index values confirmed the silicon oxynitride nature of the films. An electron microscopy analysis conducted for different annealing temperatures (T A) was also performed up to 1200 {\textdegree}C. Transmission electron microscopy (TEM) images revealed two different sublayers. The top layer showed porosities coming from a degassing of oxygen during deposition and annealing, while in the region close to the substrate, a multilayer-like structure of SiO2 and Si3N4 phases appeared, involving a spinodal decomposition. Upon a 1200 {\textdegree}C annealing treatment, a significant density of Tb clusters was detected, indicating a higher thermal threshold of rare earth (RE) clusterization in comparison to the silicon oxide matrix. With an opposite variation of the N2 flow during the deposition, the nitrogen excess parameter (Nex) estimated by RBS measurements was introduced to investigate the Fourier transform infrared (FTIR) spectrum behavior and emission properties. Different vibration modes of the Si--N and Si--O bonds have been carefully identified from the FTIR spectra characterizing such host matrices, especially the 'out-of-phase' stretching vibration mode of the Si--O bond. The highest Tb3+ photoluminescence (PL) intensity was obtained by optimizing the N incorporation and the annealing conditions. In addition, according to these conditions, the integrated PL intensity variation confirmed that the silicon nitride-based host matrix had a higher thermal threshold of rare earth clusterization than its silicon oxide counterpart. Analysis of time-resolved PL intensity versus T A showed the impact of Tb clustering on decay times, in agreement with the TEM observations. Finally, PL and PL excitation (PLE) experiments and comparison of the related spectra between undoped and Tb-doped samples were carried out to investigate the impact of the band tails on the excitation mechanism of Tb3+ ions. △ Less

Submitted 3 March, 2017; originally announced March 2017.

SiNx:Tb3+--Yb3+, an efficient down-conversion layer compatible with a silicon solar cell process

Authors: Lucile Dumont, Julien Cardin, Patrizio Benzo, Marzia Carrada, Christophe Labbe, Andrea L. Richard, David C. Ingram, Wojciech M. Jadwisienczak, Fabrice Gourbilleau

Abstract: SiN x : Tb 3+-Yb 3+, an efficient down-conversion layer compatible with silicon solar cell process Abstract Tb 3+-Yb 3+ co-doped SiN x down-conversion layers compatible with silicon Photovoltaic Technology were prepared by reactive magnetron co-sputtering. Efficient sensitization of Tb 3+ ions through a SiN x host matrix and cooperative energy transfer between Tb 3+ and Yb 3+ ions were evidenced a… ▽ More SiN x : Tb 3+-Yb 3+, an efficient down-conversion layer compatible with silicon solar cell process Abstract Tb 3+-Yb 3+ co-doped SiN x down-conversion layers compatible with silicon Photovoltaic Technology were prepared by reactive magnetron co-sputtering. Efficient sensitization of Tb 3+ ions through a SiN x host matrix and cooperative energy transfer between Tb 3+ and Yb 3+ ions were evidenced as driving mechanisms of the down-conversion process. In this paper, the film composition and microstructure are investigated alongside their optical properties, with the aim of maximizing the rare earth ions incorporation and emission efficiency. An optimized layer achieving the highest Yb 3+ emission intensity was obtained by reactive magnetron co-sputtering in a nitride rich atmosphere for 1.2 W/cm${}^2$ and 0.15 W/cm${}^2$ power density applied on the Tb and Yb targets, respectively. It was determined that depositing at 200 {\textdegree}C and annealing at 850 {\textdegree}C leads to comparable Yb 3+ emission intensity than depositing at 500 {\textdegree}C and annealing at 600 {\textdegree}C, which is promising for applications toward silicon solar cells. △ Less

Submitted 15 November, 2015; originally announced November 2015.

Comments: Solar Energy Materials and Solar Cells, Elsevier, 2015

Optical properties of PZT thin films deposited on a ZnO buffer layer

Authors: T Schneider, D Leduc, J. Cardin, C Lupi, N Barreau, H Gundel

Abstract: The optical properties of lead zirconate titanate (PZT) thin films deposited on ZnO were studied by m-lines spectroscopy. In order to retrieve the refractive index and the thickness of both layers from the m-lines spectra, we develop a numerical algorithm for the case of a two-layer system and show its robustness in the presence of noise. The sensitivity of the algorithm of the two-layer model all… ▽ More The optical properties of lead zirconate titanate (PZT) thin films deposited on ZnO were studied by m-lines spectroscopy. In order to retrieve the refractive index and the thickness of both layers from the m-lines spectra, we develop a numerical algorithm for the case of a two-layer system and show its robustness in the presence of noise. The sensitivity of the algorithm of the two-layer model allows us to relate the observed changes in the PZT refractive index to the PZT structural change due to the ZnO interface of the PZT/ZnO optical waveguide. △ Less

Submitted 23 October, 2015; originally announced October 2015.

Journal ref: Optical Materials, Elsevier, 2007, \<10.1016/j.optmat.2006.10.015\>

Modeling of optical amplifier waveguide based on silicon nanostructures and rare earth ions doped silica matrix gain media by a finite-difference time-domain method: comparison of achievable gain with Er3+ or Nd3+ ions dopants

Authors: Julien Cardin, Alexandre Fafin, Christian Dufour, Fabrice Gourbilleau

Abstract: A comparative study of the gain achievement is performed in a waveguide optical amplifier whose active layer is constituted by a silica matrix containing silicon nanograins acting as sensitizer of either neodymium ions (Nd 3+) or erbium ions (Er 3+). Due to the large difference between population levels characteristic times (ms) and finite-difference time step (10 --17 s), the conventional auxilia… ▽ More A comparative study of the gain achievement is performed in a waveguide optical amplifier whose active layer is constituted by a silica matrix containing silicon nanograins acting as sensitizer of either neodymium ions (Nd 3+) or erbium ions (Er 3+). Due to the large difference between population levels characteristic times (ms) and finite-difference time step (10 --17 s), the conventional auxiliary differential equation and finite-difference time-domain (ADE-FDTD) method is not appropriate to treat such systems. Consequently, a new two loops algorithm based on ADE-FDTD method is presented in order to model this waveguide optical amplifier. We investigate the steady states regime of both rare earth ions and silicon nanograins levels populations as well as the electromagnetic field for different pum** powers ranging from 1 to 10 4 mW.mm-2. Furthermore, the three dimensional distribution of achievable gain per unit length has been estimated in this pum** range. The Nd 3+ doped waveguide shows a higher gross gain per unit length at 1064 nm (up to 30 dB.cm-1) than the one with Er 3+ doped active layer at 1532 nm (up to 2 dB.cm-1). Considering the experimental background losses found on those waveguides we demonstrate that a significant positive net gain can only be achieved with the Nd 3+ doped waveguide. The developed algorithm is stable and applicable to optical gain materials with emitters having a wide range of characteristic lifetimes. △ Less

Submitted 18 March, 2015; originally announced March 2015.

Comments: Photonics West , Feb 2015, San Francisco, United States. S, SPIE Proceedings, 9357 (935709), 2015, Physics and Simulation of Optoelectronic Devices XXIII. arXiv admin note: text overlap with arXiv:1405.5338

A method to retrieve optical and geometrical characteristics of three layer waveguides from m-lines measurements

Authors: Thomas Schneider, Dominique Leduc, Cyril Lupi, Julien Cardin, Hartmut Gundel, Christian Boisrobert

Abstract: We consider three layer optical waveguides and present a method to measure simultaneously the refractive index and the thickness of each layer with m-lines spectroscopy. We establish the three layer waveguide modal dispersion equations and describe a numerical method to solve these equations. The accuracy of the method is evaluated by numerical simulations with noisy data and experimentally demons… ▽ More We consider three layer optical waveguides and present a method to measure simultaneously the refractive index and the thickness of each layer with m-lines spectroscopy. We establish the three layer waveguide modal dispersion equations and describe a numerical method to solve these equations. The accuracy of the method is evaluated by numerical simulations with noisy data and experimentally demonstrated using a PZT thin film placed between two ZnO layers. △ Less

Submitted 26 May, 2014; originally announced May 2014.

Journal ref: Journal of Applied Physics 103, 6 (2008) 063110-063110-7

Optical characterization of PZT thin films for waveguide applications

Authors: Julien Cardin, Dominique Leduc, Thomas Schneider, Cyril Lupi, Dominique Averty, Hartmut Gundel

Abstract: In order to develop an electro-optic waveguide, Pb(Zr, Ti)O3 ceramic ferroelectric thin films were elaborated by a modified sol-gel process on glass substrate. In the aim to study the optical properties of the PZT films, an accurate refractive index and thickness measurement apparatus was set up, which is called M-lines device. An evaluation of experimental uncertainty and calculation of the preci… ▽ More In order to develop an electro-optic waveguide, Pb(Zr, Ti)O3 ceramic ferroelectric thin films were elaborated by a modified sol-gel process on glass substrate. In the aim to study the optical properties of the PZT films, an accurate refractive index and thickness measurement apparatus was set up, which is called M-lines device. An evaluation of experimental uncertainty and calculation of the precision of the refractive index and thickness were developed on PZT layers. Two different processes of PZT elaboration were made and studied with this apparatus. The reproducibility of one fabrication process was tested and results are presented in this paper. △ Less

Submitted 23 May, 2014; originally announced May 2014.

Journal ref: Journal of European Ceramic Society 25, 12 (2005) 2913-2916

Theoretical investigation of the more suitable rare earth to achieve high gain in waveguide based on silica containing silicon nanograins doped with either Nd3+ or Er3+ ions

Authors: Alexandre Fafin, Julien Cardin, Christian Dufour, Fabrice Gourbilleau

Abstract: We present a comparative study of the gain achievement in a waveguide whose active layer is constituted by a silica matrix containing silicon nanograins acting as sensitizer of either neodymium ions (Nd3+) or erbium ions (Er3+). By means of an auxiliary differential equation and finite difference time domain (ADE-FDTD) approach that we developed, we investigate the steady states regime of both rar… ▽ More We present a comparative study of the gain achievement in a waveguide whose active layer is constituted by a silica matrix containing silicon nanograins acting as sensitizer of either neodymium ions (Nd3+) or erbium ions (Er3+). By means of an auxiliary differential equation and finite difference time domain (ADE-FDTD) approach that we developed, we investigate the steady states regime of both rare earths ions and silicon nanograins levels populations as well as the electromagnetic field for different pum** powers ranging from 1 to 104 mW/mm2. Moreover, the achievable gain has been estimated in this pum** range. The Nd3+ doped waveguide shows a higher gross gain per unit length at 1064 nm (up to 30 dB/cm) than the one with Er3+ doped active layer at 1532 nm (up to 2 dB/cm). Taking into account the experimental background losses we demonstrate that a significant positive net gain can only be achieved with the Nd3+ doped waveguide. △ Less

Submitted 21 May, 2014; originally announced May 2014.

Journal ref: Optics Express 22, 10 (2014) 12296-12306

Modeling of the electromagnetic field and level populations in a waveguide amplifier: a multi-scale time problem

Authors: Alexandre Fafin, Julien Cardin, Christian Dufour, Fabrice Gourbilleau

Abstract: A new algorithm based on auxiliary differential equation and finite difference time domain method (ADE-FDTD method) is presented to model a waveguide whose active layer is constituted of a silica matrix doped with rare-earth and silicon nanograins. The typical lifetime of rare-earth can be as large as some ms, whereas the electromagnetic field in a visible range and near-infrared is characterized… ▽ More A new algorithm based on auxiliary differential equation and finite difference time domain method (ADE-FDTD method) is presented to model a waveguide whose active layer is constituted of a silica matrix doped with rare-earth and silicon nanograins. The typical lifetime of rare-earth can be as large as some ms, whereas the electromagnetic field in a visible range and near-infrared is characterized by a period of the order of fs. Due to the large difference between these two characteristic times, the conventional ADE-FDTD method is not suited to treat such systems. A new algorithm is presented so that the steady state of rare earth and silicon nanograins electronic levels populations along with the electromagnetic field can be fully described. This algorithm is stable and applicable to a wide range of optical gain materials in which large differences of characteristic lifetimes are present. △ Less

Submitted 13 January, 2014; originally announced January 2014.

Journal ref: Optics Express 21, 20 (2013) 24171-24184