Showing 1–50 of 54 results for author: Cardarelli, R

Technical design report for the CODEX-$β$ demonstrator

Authors: CODEX-b collaboration, :, Giulio Aielli, Juliette Alimena, James Beacham, Eli Ben Haim, Andras Burucs, Roberto Cardarelli, Matthew Charles, Xabier Cid Vidal, Albert De Roeck, Biplab Dey, Silviu Dobrescu, Ozgur Durmus, Mohamed Elashri, Vladimir Gligorov, Rebeca Gonzalez Suarez, Thomas Gorordo, Zarria Gray, Conor Henderson, Louis Henry, Philip Ilten, Daniel Johnson, Jacob Kautz, Simon Knapen , et al. (28 additional authors not shown)

Abstract: The CODEX-$β$ apparatus is a demonstrator for the proposed future CODEX-b experiment, a long-lived-particle detector foreseen for operation at IP8 during HL-LHC data-taking. The demonstrator project, intended to collect data in 2025, is described, with a particular focus on the design, construction, and installation of the new apparatus. The CODEX-$β$ apparatus is a demonstrator for the proposed future CODEX-b experiment, a long-lived-particle detector foreseen for operation at IP8 during HL-LHC data-taking. The demonstrator project, intended to collect data in 2025, is described, with a particular focus on the design, construction, and installation of the new apparatus. △ Less

Submitted 22 May, 2024; originally announced June 2024.

Testbeam results of irradiated SiGe BiCMOS monolithic silicon pixel detector without internal gain layer

Authors: T. Moretti, M. Milanesio, R. Cardella, T. Kugathasan, A. Picardi, I. Semendyaev, M. Elviretti, H. Rücker, K. Nakamura, Y. Takubo, M. Togawa, F. Cadoux, R. Cardarelli, L. Cecconi, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, L. Iodice, R. Kotitsa, C. Magliocca, M. Nessi, A. Pizarro-Medina, J. Sabater Iglesias , et al. (5 additional authors not shown)

Abstract: Samples of the monolithic silicon pixel ASIC prototype produced in 2022 within the framework of the Horizon 2020 MONOLITH ERC Advanced project were irradiated with 70 MeV protons up to a fluence of 1 x 1016 neq/cm2, and then tested using a beam of 120 GeV/c pions. The ASIC contains a matrix of 100 μm pitch hexagonal pixels, readout out by low noise and very fast frontend electronics produced in a… ▽ More Samples of the monolithic silicon pixel ASIC prototype produced in 2022 within the framework of the Horizon 2020 MONOLITH ERC Advanced project were irradiated with 70 MeV protons up to a fluence of 1 x 1016 neq/cm2, and then tested using a beam of 120 GeV/c pions. The ASIC contains a matrix of 100 μm pitch hexagonal pixels, readout out by low noise and very fast frontend electronics produced in a 130 nm SiGe BiCMOS technology process. The dependence on the proton fluence of the efficiency and the time resolution of this prototype was measured with the frontend electronics operated at a power density between 0.13 and 0.9 W/cm2. The testbeam data show that the detection efficiency of 99.96% measured at sensor bias voltage of 200 V before irradiation becomes 96.2% after a fluence of 1 x 1016 neq/cm2. An increase of the sensor bias voltage to 300 V provides an efficiency to 99.7% at that proton fluence. The timing resolution of 20 ps measured before irradiation rises for a proton fluence of 1 x 1016 neq/cm2 to 53 and 45 ps at HV = 200 and 300 V, respectively. △ Less

Submitted 21 June, 2024; v1 submitted 19 April, 2024; originally announced April 2024.

In-beam performance of a Resistive Plate Chamber operated with eco-friendly gas mixtures

Authors: L. Quaglia, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati, M. Gagliardi , et al. (32 additional authors not shown)

Abstract: ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identifi… ▽ More ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identification purposes. The correct operation of these detectors is ensured by the choice of the proper gas mixture. Currently they are operated with a mixture of C$_{2}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ but, starting from 2017, new EU regulations have enforced a progressive phase-out of C$_{2}$H$_{2}$F$_{4}$ because of its large Global Warming Potential (GWP), making it difficult and costly to purchase. CERN asked LHC experiments to reduce greenhouse gases emissions, to which RPC operation contributes significantly. A possible candidate for C$_{2}$H$_{2}$F$_{4}$ replacement is the C$_{3}$H$_{2}$F$_{4}$ (diluted with other gases, such as CO$_{2}$), which has been extensively tested using cosmic rays. Promising gas mixtures have been devised; the next crucial steps are the detailed in-beam characterization of such mixtures as well as the study of their performance under increasing irradiation levels. This contribution will describe the methodology and results of beam tests carried out at the CERN GIF++ (equipped with a high activity $^{137}$Cs source and muon beam) with an ALICE-like RPC prototype, operated with several mixtures with varying proportions of CO$_{2}$, C$_{3}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ . Absorbed currents, efficiencies, prompt charges, cluster sizes, time resolutions and rate capabilities will be presented, both from digitized (for detailed shape and charge analysis) and discriminated (using the same front-end electronics as employed in ALICE) signals. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Exploring Eco-Friendly Gas Mixtures for Resistive Plate Chambers: A Comprehensive Study on Performance and Aging

Authors: The RPC ECOGas@GIF++ collaboration, :, L. Quaglia, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti , et al. (35 additional authors not shown)

Abstract: Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, invo… ▽ More Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, involving ALICE, ATLAS, CMS, LHCb/SHiP, and EP-DT communities, has undertaken intensive R\&D efforts to explore new gas mixtures for RPC technology. A leading alternative under investigation is HFO1234ze, boasting a low GWP of 6 and demonstrating reasonable performance compared to R-134a. Over the past few years, RPC detectors with slightly different characteristics and electronics have been studied using HFO and CO$_{2}$-based gas mixtures at the CERN Gamma Irradiation Facility. An aging test campaign was launched in August 2022, and during the latest test beam in July 2023, all detector systems underwent evaluation. This contribution will report the results of the aging studies and the performance evaluations of the detectors with and without irradiation. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Time Resolution of a SiGe BiCMOS Monolithic Silicon Pixel Detector without Internal Gain Layer with a Femtosecond Laser

Authors: M. Milanesio, L. Paolozzi, T. Moretti, A. Latshaw, L. Bonacina, R. Cardella, T. Kugathasan, A. Picardi, M. Elviretti, H. Rücker, R. Cardarelli, L. Cecconi, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, L. Iodice, R. Kotitsa, C. Magliocca, M. Nessi, A. Pizarro-Medina, J. Sabater Iglesias, I. Semendyaev, J. Saidi, M. Vicente Barreto Pinto, S. Zambito , et al. (1 additional authors not shown)

Abstract: The time resolution of the second monolithic silicon pixel prototype produced for the MONOLITH H2020 ERC Advanced project was studied using a femtosecond laser. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Silicon wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully deplete… ▽ More The time resolution of the second monolithic silicon pixel prototype produced for the MONOLITH H2020 ERC Advanced project was studied using a femtosecond laser. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Silicon wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully depleted sensor. At the highest frontend power density tested of 2.7 W/cm2, the time resolution with the femtosecond laser pulses was found to be 45 ps for signals generated by 1200 electrons, and 3 ps in the case of 11k electrons, which corresponds approximately to 0.4 and 3.5 times the most probable value of the charge generated by a minimum-ionizing particle. The results were compared with testbeam data taken with the same prototype to evaluate the time jitter produced by the fluctuations of the charge collection. △ Less

Submitted 11 February, 2024; v1 submitted 2 January, 2024; originally announced January 2024.

Comments: Submitted to JINST

Preliminary results on the long term operation of RPCs with eco-friendly gas mixtures under irradiation at the CERN Gamma Irradiation Facility

Authors: L. Quaglia, D. Ramos, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciacco, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati , et al. (33 additional authors not shown)

Abstract: Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in a… ▽ More Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in avalanche mode and in view of evaluating possible ageing effects after long high background irradiation periods, e.g. High-Luminosity LHC phase. This challenging research is also part of a task of the European AidaInnova project. A promising eco-friendly gas identified for RPC operation is the tetrafluoruropropene (C$_{3}$H$_{2}$F$_{4}$, commercially known as HFO-1234ze) that has been studied at the CERN GIF++ in combination with different percentages of CO$_2$. Between the end of 2021 and 2022 several beam tests have been carried out to establish the performance of RPCs operated with such mixtures before starting the irradiation campaign for the ageing study. Results of these tests for different RPCs layouts and different gas mixtures, under increasing background rates are presented here, together with the preliminary outcome of the detector ageing tests. △ Less

Submitted 29 November, 2023; originally announced November 2023.

High-rate tests on Resistive Plate Chambers operated with eco-friendly gas mixtures

Authors: M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, F. Bordon, D. Boscherini, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati, M. Gagliardi, R. Guida , et al. (30 additional authors not shown)

Abstract: Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider exp… ▽ More Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider experiments, were performed, and demonstrate a performance basically similar to the one obtained with the gas mixtures currently in use, based on Tetrafluoroethane, which is being progressively phased out for its possible contribution to the greenhouse effect. Long term aging tests are also being carried out, with the goal to demonstrate the possibility of using these eco-friendly gas mixtures during the whole High Luminosity phase of the Large Hadron Collider. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: Submitted to European Physical Journal C on October 24, 2023, 15 pages, 14 figures

Cosmic-ray searches with the MATHUSLA detector

Authors: Cristiano Alpigiani, J. C. Arteaga-Velázquez, Daniela Blanco-Lira, Davide Boscherini, K. S. Caballero-Mora, Paolo Camarri, Roberto Cardarelli, Dennis Cazar Ramírez, Giuseppe Di Sciascio, Arturo Fernández Téllez, H. J. Lubatti, O. G. Morales-Olivares, Piter Amador Paye Mamani, David Rivera Rangel, Mario Rodríguez-Cahuantzi, Rinaldo Santonico, Martin Alfonso Subieta Vázquez

Abstract: The performance of the proposed MATHUSLA detector as an instrument for studying the physics of cosmic rays by measuring extensive air showers is presented. The MATHUSLA detector is designed to observe and study the decay of long-lived particles produced at the pp interaction point of the CMS detector at CERN during the HL-LHC data-taking period. The proposed MATHUSLA detector will be composed of m… ▽ More The performance of the proposed MATHUSLA detector as an instrument for studying the physics of cosmic rays by measuring extensive air showers is presented. The MATHUSLA detector is designed to observe and study the decay of long-lived particles produced at the pp interaction point of the CMS detector at CERN during the HL-LHC data-taking period. The proposed MATHUSLA detector will be composed of many layers of long scintillating bars that cannot measure more than one hit per bar and correctly report the hit coordinate in case of multiple hits. This study shows that adding a layer of RPC detectors with both analogue and digital readout significantly enhances the capabilities of MATHUSLA to measure the local densities and arrival times of charged particles at the front of air showers. We discuss open issues in cosmic-ray physics that the proposed MATHUSLA detector with an additional layer of RPC detectors could address and conclude by comparing with other air-shower facilities that measure cosmic rays in the PeV energy range. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: 64 pages, 58 figures

Radiation Tolerance of SiGe BiCMOS Monolithic Silicon Pixel Detectors without Internal Gain Layer

Authors: M. Milanesio, L. Paolozzi, T. Moretti, R. Cardella, T. Kugathasan, F. Martinelli, A. Picardi, I. Semendyaev, S. Zambito, K. Nakamura, Y. Tabuko, M. Togawa, M. Elviretti, H. Rücker, F. Cadoux, R. Cardarelli, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, L. Iodice, R. Kotitsa, C. Magliocca, M. Nessi , et al. (5 additional authors not shown)

Abstract: A monolithic silicon pixel prototype produced for the MONOLITH ERC Advanced project was irradiated with 70 MeV protons up to a fluence of 1 x 10^16 1 MeV n_eq/cm^2. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully depleted se… ▽ More A monolithic silicon pixel prototype produced for the MONOLITH ERC Advanced project was irradiated with 70 MeV protons up to a fluence of 1 x 10^16 1 MeV n_eq/cm^2. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully depleted sensor. Laboratory tests conducted with a 90Sr source show that the detector works satisfactorily after irradiation. The signal-to-noise ratio is not seen to change up to fluence of 6 x 10^14 n_eq /cm^2 . The signal time jitter was estimated as the ratio between the voltage noise and the signal slope at threshold. At -35 {^\circ}C, sensor bias voltage of 200 V and frontend power consumption of 0.9 W/cm^2, the time jitter of the most-probable signal amplitude was estimated to be 21 ps for proton fluence up to 6 x 10 n_eq/cm^2 and 57 ps at 1 x 10^16 n_eq/cm^2 . Increasing the sensor bias to 250 V and the analog voltage of the preamplifier from 1.8 to 2.0 V provides a time jitter of 40 ps at 1 x 10^16 n_eq/cm^2. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: Submitted to JINST

20 ps Time Resolution with a Fully-Efficient Monolithic Silicon Pixel Detector without Internal Gain Layer

Authors: S. Zambito, M. Milanesio, T. Moretti, L. Paolozzi, M. Munker, R. Cardella, T. Kugathasan, F. Martinelli, A. Picardi, M. Elviretti, H. Rücker, A. Trusch, F. Cadoux, R. Cardarelli, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, L. Iodice, R. Kotitsa, C. Magliocca, M. Nessi, A. Pizarro-Medina, J. Sabater Iglesias , et al. (3 additional authors not shown)

Abstract: A second monolithic silicon pixel prototype was produced for the MONOLITH project. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by a low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer of 350 Ωcm resistivity were used to produce a fully depleted sensor. Laboratory and testbeam measurements of the analog channels present in the pixel… ▽ More A second monolithic silicon pixel prototype was produced for the MONOLITH project. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by a low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer of 350 Ωcm resistivity were used to produce a fully depleted sensor. Laboratory and testbeam measurements of the analog channels present in the pixel matrix show that the sensor has a 130 V wide bias-voltage operation plateau at which the efficiency is 99.8%. Although this prototype does not include an internal gain layer, the design optimised for timing of the sensor and the front-end electronics provides a time resolutions of 20 ps. △ Less

Submitted 28 January, 2023; originally announced January 2023.

Comments: 11 pages, 11 figures

Searching for an eco-friendly gas mixture for the ALICE Resistive Plate Chambers

Authors: Luca Quaglia, R. Cardarelli, B. Liberti, E. Pastori, G. Proto, G. Aielli, P. Camarri, A. Di Ciacco, L. Di Stante, R. Santonico, G. Alberghi, D. Boscherini, A. Bruni, L. Massa, A. Polini, M. Romano, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo M. Ferrini, G. Saviano, M. Abbrescia, L. Congedo , et al. (25 additional authors not shown)

Abstract: The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2… ▽ More The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2014. Even though research activities are excluded from these regulations, the phase-down will inevitably increase their price and CERN is also aiming to cut down on its emissions. For these reasons it is crucial to find a more eco-friendly gas mixture for RPCs by the time of the LHC long shutdown 3, foreseen in 2026. Since $C_{2}H_{2}F_{4}$ is the main contributor to the mixture GWP, an extensive R&D process has started to replace it with tetrafluoropropene ($C_{3}H_{2}F_{4}$), due to its chemical similarity with $C_{2}H_{2}F_{4}$ and its low GWP (around 7). Preliminary tests with cosmic rays have shown promising results in terms of detector performance. The next step is to study the long-term behavior of RPCs operated with these new gas mixtures (aging studies). Since this is a subject of interest for all (and not only) the LHC experiments, a collaboration, ECOgas@GIF++, was setup to carry out joint studies. Among others, a small ALICE-like RPC was installed at the Gamma Irradiation Facility at CERN, where they are exposed to a strong radiation field, coming from a 12.5 TBq $^{137}$Cs source, which allows one to simulate many years of operation in a relatively short time. The facility also provides a muon beam at specific times of the year, which can be used to study the detector performance (e.g. efficiency and cluster size) during and after irradiation. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Comments: Proceedings of the LHCp 2022 conference

Testbeam Results of the Picosecond Avalanche Detector Proof-Of-Concept Prototype

Authors: G. Iacobucci, S. Zambito, M. Milanesio, T. Moretti, J. Saidi, L. Paolozzi, M. Munker, R. Cardella, F. Martinelli, A. Picardi, H. Rücker, A. Trusch, P. Valerio, F. Cadoux, R. Cardarelli, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, Y. Gurimskaya, R. Kotitsa, C. Magliocca, M. Nessi, A. Pizarro-Medina , et al. (2 additional authors not shown)

Abstract: The proof-of-concept prototype of the Picosecond Avalanche Detector, a multi-PN junction monolithic silicon detector with continuous gain layer deep in the sensor depleted region, was tested with a beam of 180 GeV pions at the CERN SPS. The prototype features low noise and fast SiGe BiCMOS frontend electronics and hexagonal pixels with 100 μm pitch. At a sensor bias voltage of 125 V, the detector… ▽ More The proof-of-concept prototype of the Picosecond Avalanche Detector, a multi-PN junction monolithic silicon detector with continuous gain layer deep in the sensor depleted region, was tested with a beam of 180 GeV pions at the CERN SPS. The prototype features low noise and fast SiGe BiCMOS frontend electronics and hexagonal pixels with 100 μm pitch. At a sensor bias voltage of 125 V, the detector provides full efficiency and average time resolution of 30, 25 and 17 ps in the overall pixel area for a power consumption of 0.4, 0.9 and 2.7 W/cm^2, respectively. In this first prototype the time resolution depends significantly on the distance from the center of the pixel, varying at the highest power consumption measured between 13 ps at the center of the pixel and 25 ps in the inter-pixel region. △ Less

Submitted 23 August, 2022; originally announced August 2022.

Picosecond Avalanche Detector -- working principle and gain measurement with a proof-of-concept prototype

Authors: L. Paolozzi, M. Munker, R. Cardella, M. Milanesio, Y. Gurimskaya, F. Martinelli, A. Picardi, H. Rücker, A. Trusch, P. Valerio, F. Cadoux, R. Cardarelli, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, R. Kotitsa, C. Magliocca, T. Moretti, M. Nessi, A. Pizarro Medina, J. Sabater Iglesias, J. Saidi, M. Vicente Barreto Pinto , et al. (2 additional authors not shown)

Abstract: The Picosecond Avalanche Detector is a multi-junction silicon pixel detector based on a $\mathrm{(NP)_{drift}(NP)_{gain}}$ structure, devised to enable charged-particle tracking with high spatial resolution and picosecond time-stamp capability. It uses a continuous junction deep inside the sensor volume to amplify the primary charge produced by ionizing radiation in a thin absorption layer. The si… ▽ More The Picosecond Avalanche Detector is a multi-junction silicon pixel detector based on a $\mathrm{(NP)_{drift}(NP)_{gain}}$ structure, devised to enable charged-particle tracking with high spatial resolution and picosecond time-stamp capability. It uses a continuous junction deep inside the sensor volume to amplify the primary charge produced by ionizing radiation in a thin absorption layer. The signal is then induced by the secondary charges moving inside a thicker drift region. A proof-of-concept monolithic prototype, consisting of a matrix of hexagonal pixels with 100 $μ$m pitch, has been produced using the 130 nm SiGe BiCMOS process by IHP microelectronics. Measurements on probe station and with a $^{55}$Fe X-ray source show that the prototype is functional and displays avalanche gain up to a maximum electron gain of 23. A study of the avalanche characteristics, corroborated by TCAD simulations, indicates that space-charge effects due to the large primary charge produced by the conversion of X-rays from the $^{55}$Fe source limits the effective gain. △ Less

Submitted 25 September, 2022; v1 submitted 16 June, 2022; originally announced June 2022.

Recent Progress and Next Steps for the MATHUSLA LLP Detector

Authors: Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Austin Ball, Liron Barak, Jared Barron, Brian Batell, James Beacham, Yan Benhammo, Benjamin Brau, Karen Salomé Caballero-Mora, Paolo Camarri, Roberto Cardarelli, John Paul Chou, Wentao Cui, David Curtin, Miriam Diamond, Keith R. Dienes, Liam Andrew Dougherty, William Dougherty, Marco Drewes, Sameer Erramilli, Rouven Essig, Erez Etzion, Jared Evans, Arturo Fernández Téllez , et al. (71 additional authors not shown)

Abstract: We report on recent progress and next steps in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC as part of the Snowmass 2021 process. Our understanding of backgrounds has greatly improved, aided by detailed simulation studies, and significant R&D has been performed on designing the scintillator detectors and understanding their performance. The collaboration is… ▽ More We report on recent progress and next steps in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC as part of the Snowmass 2021 process. Our understanding of backgrounds has greatly improved, aided by detailed simulation studies, and significant R&D has been performed on designing the scintillator detectors and understanding their performance. The collaboration is on track to complete a Technical Design Report, and there are many opportunities for interested new members to contribute towards the goal of designing and constructing MATHUSLA in time for HL-LHC collisions, which would increase the sensitivity to a large variety of highly motivated LLP signals by orders of magnitude. △ Less

Submitted 30 March, 2023; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021 (EF09, EF10, IF6, IF9), 18 pages, 12 figures. v2: included additional endorsers. v3: updated affiliations. v4: added missing contributors as authors

Efficiency and time resolution of monolithic silicon pixel detectors in SiGe BiCMOS technology

Authors: G. Iacobucci, L. Paolozzi, P. Valerio, T. Moretti, F. Cadoux, R. Cardarelli, R. Cardella, S. Débieux, Y. Favre, D. Ferrere, S. Gonzalez-Sevilla, Y. Gurimskaya, R. Kotitsa, C. Magliocca, F. Martinelli, M. Milanesio, M. Münker, M. Nessi, A. Picardi, J. Saidi, H. Rücker, M. Vicente Barreto Pinto, S. Zambito

Abstract: A monolithic silicon pixel detector prototype has been produced in the SiGe BiCMOS SG13G2 130 nm node technology by IHP. The ASIC contains a matrix of hexagonal pixels with pitch of approximately 100 $μ$m. Three analog pixels were calibrated in laboratory with radioactive sources and tested in a 180 GeV/c pion beamline at the CERN SPS. A detection efficiency of $\left(99.9^{+0.1}_{-0.2}\right)$% w… ▽ More A monolithic silicon pixel detector prototype has been produced in the SiGe BiCMOS SG13G2 130 nm node technology by IHP. The ASIC contains a matrix of hexagonal pixels with pitch of approximately 100 $μ$m. Three analog pixels were calibrated in laboratory with radioactive sources and tested in a 180 GeV/c pion beamline at the CERN SPS. A detection efficiency of $\left(99.9^{+0.1}_{-0.2}\right)$% was measured together with a time resolution of $(36.4 \pm 0.8)$ps at the highest preamplifier bias current working point of 150 $μ$A and at a sensor bias voltage of 160 V. The ASIC was also characterized at lower bias voltage and preamplifier current. △ Less

Submitted 21 January, 2022; v1 submitted 16 December, 2021; originally announced December 2021.

On a new environment-friendly gas mixture for Resistive Plate Chambers

Authors: G. Proto, B. Liberti, R. Santonico, G. Aielli, P. Camarri, R. Cardarelli, A. Di Ciaccio, L. Di Stante, A. Paoloni, E. Pastori, L. Pizzimento, A. Rocchi

Abstract: This paper studies the performance of RPCs working with a new family of environment-friendly operating gases, mainly based on Carbon Dioxide and Hydro-Fluoro-Olefins. The tests are carried out on a 2 mm gap RPC and concern the measurement of detection efficiency, avalanche-to-streamer transition probability, prompt and ionic charge delivered. The timing properties of the new gas are also measured. This paper studies the performance of RPCs working with a new family of environment-friendly operating gases, mainly based on Carbon Dioxide and Hydro-Fluoro-Olefins. The tests are carried out on a 2 mm gap RPC and concern the measurement of detection efficiency, avalanche-to-streamer transition probability, prompt and ionic charge delivered. The timing properties of the new gas are also measured. △ Less

Submitted 13 December, 2021; v1 submitted 5 December, 2021; originally announced December 2021.

Comments: 20 pages, 17 figures

A massively scalable Time-to-Digital Converter with a PLL-free calibration system in a commercial 130 nm process

Authors: Fulvio Martinelli, Pierpaolo Valerio, Roberto Cardarelli, Edoardo Charbon, Giuseppe Iacobucci, Marzio Nessi, Lorenzo Paolozzi

Abstract: A 33.6 ps LSB Time-to-Digital converter was designed in 130 nm BiCMOS technology. The core of the converter is a differential 9-stage ring oscillator, based on a multi-path architecture. A novel version of this design is proposed, along with an analytical model of linearity. The model allowed us to understand the source of the performance superiority (in terms of linearity) of our design and to pr… ▽ More A 33.6 ps LSB Time-to-Digital converter was designed in 130 nm BiCMOS technology. The core of the converter is a differential 9-stage ring oscillator, based on a multi-path architecture. A novel version of this design is proposed, along with an analytical model of linearity. The model allowed us to understand the source of the performance superiority (in terms of linearity) of our design and to predict further improvements. The oscillator is integrated in a event-by-event self-calibration system that allows avoiding any PLL-based synchronization. For this reason and for the compactness and simplicity of the architecture, the proposed TDC is suitable for applications in which a large number of converters and a massive parallelization are required such as High-Energy Physics and medical imaging detector systems. A test chip for the TDC has been fabricated and tested. The TDC shows a DNL$\leq$1.3 LSB, an INL$\leq$2 LSB and a single-shot precision of 19.5 ps (0.58 LSB). The chip dissipates a power of 5.4 mW overall. △ Less

Submitted 1 September, 2021; v1 submitted 21 July, 2021; originally announced July 2021.

An Update to the Letter of Intent for MATHUSLA: Search for Long-Lived Particles at the HL-LHC

Authors: Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Austin Ball, Liron Barak, Jared Barron, Brian Batell, James Beacham, Yan Benhammo, Karen Salomé Caballero-Mora, Paolo Camarri, Roberto Cardarelli, John Paul Chou, Wentao Cui, David Curtin, Miriam Diamond, Keith R. Dienes, Liam Andrew Dougherty, Giuseppe Di Sciascio, Marco Drewes, Erez Etzion, Rouven Essig, Jared Evans, Arturo Fernández Téllez, Oliver Fischer, Jim Freeman , et al. (58 additional authors not shown)

Abstract: We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m… ▽ More We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m in height. Engineering studies have been made in order to locate much of the decay volume below ground, bringing the detector even closer to the IP. With these changes, a 100 m x 100 m detector has the same physics reach for large c$τ$ as the 200 m x 200 m detector described in the LoI and other studies. The performance for small c$τ$ is improved because of the proximity to the IP. Detector technology has also evolved while retaining the strip-like sensor geometry in Resistive Plate Chambers (RPC) described in the LoI. The present design uses extruded scintillator bars read out using wavelength shifting fibers and silicon photomultipliers (SiPM). Operations will be simpler and more robust with much lower operating voltages and without the use of greenhouse gases. Manufacturing is straightforward and should result in cost savings. Understanding of backgrounds has also significantly advanced, thanks to new simulation studies and measurements taken at the MATHUSLA test stand operating above ATLAS in 2018. We discuss next steps for the MATHUSLA collaboration, and identify areas where new members can make particularly important contributions. △ Less

Submitted 3 September, 2020; originally announced September 2020.

Comments: 22 pages + references, 12 Figures

Report number: CERN-LHCC-2020-014, LHCC-I-031-ADD-1

Characterization of new eco friendly gas mixtures based on HFO for RPCs

Authors: G. Proto, G. Aielli, E. Alunno Camelia, P. Camarri, R. Cardarelli, A. Di Ciaccio, L. Di Stante, B. Liberti, A. Paoloni, E. Pastori, L. Pizzimento, A. Rocchi, R. Santonico, E. Tusi

Abstract: The ATLAS RPC standard mixture, mainly based on C$_{2}$H$_{2}$F$_{4}$, has a high Global Warming Potential (GWP) and therefore the search for RPC eco friendly gases is mandatory. In this work we present the results on the detector performances in terms of efficiency, prompt and ionic charge, with different gas mixtures. The ATLAS RPC standard mixture, mainly based on C$_{2}$H$_{2}$F$_{4}$, has a high Global Warming Potential (GWP) and therefore the search for RPC eco friendly gases is mandatory. In this work we present the results on the detector performances in terms of efficiency, prompt and ionic charge, with different gas mixtures. △ Less

Submitted 30 May, 2020; originally announced June 2020.

Linearity and rate capability measurements of RPC with semi-insulating crystalline electrodes operating in avalanche mode

Authors: A. Rocchi, R. Cardarelli, B. Liberti, G. Aielli, E. Alunno Camelia, P. Camarri, M. Cirillo, A. Di Ciaccio, L. Di Stante, M. Lucci, E. Pastori, L. Pizzimento, G. Proto, E. Tusi, R. Santonico

Abstract: The intrinsic rate capability and the ageing properties of the Resistive Plate Chambers are closely related to the electrodes material and to the front-end electronics threshold. The development of a low noise pre-amplifier led us to improve the intrinsic rate capability of High Pressure Laminate (bakelite) up to $\sim10\;kHz/cm^2$, nevertheless the effective rate is significantly limited by elect… ▽ More The intrinsic rate capability and the ageing properties of the Resistive Plate Chambers are closely related to the electrodes material and to the front-end electronics threshold. The development of a low noise pre-amplifier led us to improve the intrinsic rate capability of High Pressure Laminate (bakelite) up to $\sim10\;kHz/cm^2$, nevertheless the effective rate is significantly limited by electrodes ageing. To further improve the effective rate capability new materials are investigated. A Resistive Plate Chamber with crystalline semi-insulating Gallium Arsenide electrodes has been characterized with high energy electrons beam at the Beam Test Facility (BFT), (INFN National Laboratory of Frascati, Italy). The response of the Resistive Plate Chamber to multiple bunched electrons was measured operating the detector in avalanche mode. The intrinsic rate capability has been also measured operating the detector in a uniform high energy gamma radiation field at the GIF++ facility (EHN1 of SPS, CERN). △ Less

Submitted 30 May, 2020; originally announced June 2020.

Comments: 6 pages, 7 figures

Time resolution and power consumption of a monolithic silicon pixel prototype in SiGe BiCMOS technology

Authors: L. Paolozzi, R. Cardarelli, S. Débieux, Y. Favre, D. Ferrère, S. Gonzalez-Sevilla, G. Iacobucci, M. Kaynak, F. Martinelli, M. Nessi, H. Rücker, I. Sanna, DMS Sultan, P. Valerio, E. Zaffaroni

Abstract: SiGe BiCMOS technology can be used to produce ultra-fast, low-power silicon pixel sensors that provide state-of-the-art time resolution even without an internal gain mechanism. The development of such sensors requires the identification of the main factors that may degrade the timing performance and the characterisation of the dependance of the sensor time resolution on the amplifier power consump… ▽ More SiGe BiCMOS technology can be used to produce ultra-fast, low-power silicon pixel sensors that provide state-of-the-art time resolution even without an internal gain mechanism. The development of such sensors requires the identification of the main factors that may degrade the timing performance and the characterisation of the dependance of the sensor time resolution on the amplifier power consumption. Measurements with a $ \mathrm{^{90}Sr} $ source of a prototype sensor produced in SG13G2 technology from IHP Microelectronics, shows a time resolution of 140 ps at an amplifier current of 7 $ \mathrmμ $A and 45 ps at higher power consumption. A full simulation shows that the resolution on the measurement of the signal time-over-threshold, used to correct for time walk, is the main factor affecting the timing performance. △ Less

Submitted 28 August, 2020; v1 submitted 28 May, 2020; originally announced May 2020.

The MATHUSLA Test Stand

Authors: Maf Alidra, Cristiano Alpigiani, Austin Ball, Paolo Camarri, Roberto Cardarelli, John Paul Chou, David Curtin, Erez Etzion, Ali Garabaglu, Brandon Gomes, Roberto Guida, W. Kuykendall, Audrey Kvam, Dragoslav Lazic, H. J. Lubatti, Giovanni Marsella, Gilad Mizrachi, Antonio Policicchio, Mason Proffitt, Joe Rothberg, Rinaldo Santonico, Yiftah Silver, Steffie Ann Thayil, Emma Torro-Pastor, Gordon Watts , et al. (1 additional authors not shown)

Abstract: The rate of muons from LHC $pp$ collisions reaching the surface above the ATLAS interaction point is measured and compared with expected rates from decays of $W$ and $Z$ bosons and $b$- and $c$-quark jets. In addition, data collected during periods without beams circulating in the LHC provide a measurement of the background from cosmic ray inelastic backscattering that is compared to simulation pr… ▽ More The rate of muons from LHC $pp$ collisions reaching the surface above the ATLAS interaction point is measured and compared with expected rates from decays of $W$ and $Z$ bosons and $b$- and $c$-quark jets. In addition, data collected during periods without beams circulating in the LHC provide a measurement of the background from cosmic ray inelastic backscattering that is compared to simulation predictions. Data were recorded during 2018 in a 2.5 $\times$ 2.5 $\times$ 6.5~$\rm{m}^3$ active volume MATHUSLA test stand detector unit consisting of two scintillator planes, one at the top and one at the bottom, which defined the trigger, and six layers of RPCs between them, grouped into three $(x,y)$-measuring layers separated by 1.74 m from each other. Triggers selecting both upward-going tracks and downward-going tracks were used. △ Less

Submitted 9 September, 2020; v1 submitted 5 May, 2020; originally announced May 2020.

Comments: 18 pages, 11 figures, 1 table

Expression of Interest for the CODEX-b Detector

Authors: Giulio Aielli, Eli Ben-Haim, Roberto Cardarelli, Matthew John Charles, Xabier Cid Vidal, Victor Coco, Biplab Dey, Raphael Dumps, Jared A. Evans, George Gibbons, Olivier Le Dortz, Vladimir V. Gligorov, Philip Ilten, Simon Knapen, Jongho Lee, Saul López Soliño, Benjamin Nachman, Michele Papucci, Francesco Polci, Robin Quessard, Harikrishnan Ramani, Dean J. Robinson, Heinrich Schindler, Michael D. Sokoloff, Paul Swallow , et al. (3 additional authors not shown)

Abstract: This document presents the physics case and ancillary studies for the proposed CODEX-b long-lived particle (LLP) detector, as well as for a smaller proof-of-concept demonstrator detector, CODEX-$β$, to be operated during Run 3 of the LHC. Our development of the CODEX-b physics case synthesizes `top-down' and `bottom-up' theoretical approaches, providing a detailed survey of both minimal and comple… ▽ More This document presents the physics case and ancillary studies for the proposed CODEX-b long-lived particle (LLP) detector, as well as for a smaller proof-of-concept demonstrator detector, CODEX-$β$, to be operated during Run 3 of the LHC. Our development of the CODEX-b physics case synthesizes `top-down' and `bottom-up' theoretical approaches, providing a detailed survey of both minimal and complete models featuring LLPs. Several of these models have not been studied previously, and for some others we amend studies from previous literature: In particular, for gluon and fermion-coupled axion-like particles. We moreover present updated simulations of expected backgrounds in CODEX-b's actively shielded environment, including the effects of shielding propagation uncertainties, high-energy tails and variation in the shielding design. Initial results are also included from a background measurement and calibration campaign. A design overview is presented for the CODEX-$β$ demonstrator detector, which will enable background calibration and detector design studies. Finally, we lay out brief studies of various design drivers of the CODEX-b experiment and potential extensions of the baseline design, including the physics case for a calorimeter element, precision timing, event tagging within LHCb, and precision low-momentum tracking. △ Less

Submitted 7 January, 2021; v1 submitted 1 November, 2019; originally announced November 2019.

Comments: 99 pages, 36 figures. Journal version

A 50 ps resolution monolithic active pixel sensor without internal gain in SiGe BiCMOS technology

Authors: G. Iacobucci, R. Cardarelli, S. Débieux, F. A. Di Bello, Y. Favre, D. Hayakawa, M. Kaynak, M. Nessi, L. Paolozzi, H. Rücker, DMS Sultan, P. Valerio

Abstract: A monolithic pixelated silicon detector designed for high time resolution has been produced in the SG13G2 130 nm SiGe BiCMOS technology of IHP Mikroelektronik. This proof-of-concept chip contains hexagonal pixels of 65 μm and 130 μm side. The SiGe front-end electronics implemented provides an equivalent noise charge of 90 and 160 electrons for a pixel capacitance of 70 and 220 fF, respectively, an… ▽ More A monolithic pixelated silicon detector designed for high time resolution has been produced in the SG13G2 130 nm SiGe BiCMOS technology of IHP Mikroelektronik. This proof-of-concept chip contains hexagonal pixels of 65 μm and 130 μm side. The SiGe front-end electronics implemented provides an equivalent noise charge of 90 and 160 electrons for a pixel capacitance of 70 and 220 fF, respectively, and a total time walk of less than 1 ns. Lab measurements with a 90Sr source show a time resolution of the order of 50 ps. This result is competitive with silicon technologies that integrate an avalanche gain mechanism. △ Less

Submitted 26 August, 2019; originally announced August 2019.

MATHUSLA: A Detector Proposal to Explore the Lifetime Frontier at the HL-LHC

Authors: Henry Lubatti, Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Austin Ball, Liron Barak James Beacham, Yan Benhammo, Karen Salomé Caballero-Mora, Paolo Camarri, Tingting Cao, Roberto Cardarelli, John Paul Chou, David Curtin, Albert de Roeck, Giuseppe Di Sciascio, Miriam Diamond, Marco Drewes, Sarah C. Eno, Rouven Essig, Jared Evans, Erez Etzion, Arturo Fernández Téllez, Oliver Fischer, Jim Freeman, Stefano Giagu, Brandon Gomes , et al. (38 additional authors not shown)

Abstract: The observation of long-lived particles at the LHC would reveal physics beyond the Standard Model, could account for the many open issues in our understanding of our universe, and conceivably point to a more complete theory of the fundamental interactions. Such long-lived particle signatures are fundamentally motivated and can appear in virtually every theoretical construct that address the Hierar… ▽ More The observation of long-lived particles at the LHC would reveal physics beyond the Standard Model, could account for the many open issues in our understanding of our universe, and conceivably point to a more complete theory of the fundamental interactions. Such long-lived particle signatures are fundamentally motivated and can appear in virtually every theoretical construct that address the Hierarchy Problem, Dark Matter, Neutrino Masses and the Baryon Asymmetry of the Universe. We describe in this document a large detector, MATHUSLA, located on the surface above an HL-LHC $pp$ interaction point, that could observe long-lived particles with lifetimes up to the Big Bang Nucleosynthesis limit of 0.1 s. We also note that its large detector area allows MATHUSLA to make important contributions to cosmic ray physics. Because of the potential for making a major breakthrough in our conceptual understanding of the universe, long-lived particle searches should have the highest level of priority. △ Less

Submitted 13 January, 2019; originally announced January 2019.

Comments: 8 pages, 5 figures. Input to the update process of the European Strategy for Particle Physics by the MATHUSLA collaboration (http://mathusla.web.cern.ch). See also CERN-PBC-REPORT-2018-007 for the ESPP contribution of the Physics Beyond Colliders working group, which contains a discussion of low-energy simplified models as well as some comments on MATHUSLA's budget and timelines

Characterization of the demonstrator of the fast silicon monolithic ASIC for the TT-PET project

Authors: Lorenzo Paolozzi, Yves Bandi, Roberto Cardarelli, Stephane Debieux, Yannick Favre, Didier Ferrere, Dean Forshaw, Daiki Hayakawa, Giuseppe Iacobucci, Mehmet Kaynak, Antonio Miucci, Marzio Nessi, Emanuele Ripiccini, Holger Ruecker, Pierpaolo Valerio, Michele Weber

Abstract: The TT-PET collaboration is develo** a small animal TOF-PET scanner based on monolithic silicon pixel sensors in SiGe BiCMOS technology. The demonstrator chip, a small-scale version of the final detector ASIC, consists of a 3 x 10 pixel matrix integrated with the front-end, a 50 ps binning TDC and read out logic. The chip, thinned down to 100 μm and backside metallized, was operated at a voltage… ▽ More The TT-PET collaboration is develo** a small animal TOF-PET scanner based on monolithic silicon pixel sensors in SiGe BiCMOS technology. The demonstrator chip, a small-scale version of the final detector ASIC, consists of a 3 x 10 pixel matrix integrated with the front-end, a 50 ps binning TDC and read out logic. The chip, thinned down to 100 μm and backside metallized, was operated at a voltage of 180 V. The tests on a beam line of minimum ionizing particles show a detection efficiency greater than 99.9 % and a time resolution down to 110 ps. △ Less

Submitted 27 November, 2018; originally announced November 2018.

A monolithic ASIC demonstrator for the Thin Time-of-Flight PET scanner

Authors: Pierpaolo Valerio, Roberto Cardarelli, Giuseppe Iacobucci, Lorenzo Paolozzi, Emanuele Ripiccini, Daiki Hayakawa, Salvatore Bruno, Alessandro Caltabiano, Mehmet Kaynak, Holger Rueker, Marzio Nessi

Abstract: Time-of-flight measurement is an important advancement in PET scanners to improve image reconstruction with a lower delivered radiation dose. This article describes the monolithic ASIC for the TT-PET project, a novel idea for a high-precision PET scanner for small animals. The chip uses a SiGe Bi-CMOS process for timing measurements, integrating a fully-depleted pixel matrix with a low-power BJT-b… ▽ More Time-of-flight measurement is an important advancement in PET scanners to improve image reconstruction with a lower delivered radiation dose. This article describes the monolithic ASIC for the TT-PET project, a novel idea for a high-precision PET scanner for small animals. The chip uses a SiGe Bi-CMOS process for timing measurements, integrating a fully-depleted pixel matrix with a low-power BJT-based front-end per channel, integrated on the same 100 $μ m$ thick die. The target timing resolution is 30 ps RMS for electrons from the conversion of 511 keV photons. A novel synchronization scheme using a patent-pending TDC is used to allow the synchronization of 1.6 million channels across almost 2000 different chips at picosecond-level. A full-featured demonstrator chip with a 3x10 matrix of 500x500 $μ m^{2}$ pixels was produced to validate each block. Its design and experimental results are presented here. △ Less

Submitted 26 November, 2018; originally announced November 2018.

A Letter of Intent for MATHUSLA: a dedicated displaced vertex detector above ATLAS or CMS

Authors: Cristiano Alpigiani, Austin Ball, Liron Barak, James Beacham, Yan Benhammo, Tingting Cao, Paolo Camarri, Roberto Cardarelli, Mario Rodriguez-Cahuantzi, John Paul Chou, David Curtin, Miriam Diamond, Giuseppe Di Sciascio, Marco Drewes, Sarah C. Eno, Erez Etzion, Rouven Essig, Jared Evans, Oliver Fischer, Stefano Giagu, Brandon Gomes, Andy Haas, Yuekun Heng, Giuseppe Iaselli, Ken Johns , et al. (39 additional authors not shown)

Abstract: In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particle… ▽ More In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particles (LLPs) with up to several orders of magnitude better sensitivity than ATLAS or CMS, while also acting as a cutting-edge cosmic ray telescope at CERN to explore many open questions in cosmic ray and astro-particle physics. We review the physics motivations for MATHUSLA and summarize its LLP reach for several different possible detector geometries, as well as outline the cosmic ray physics program. We present several updated background studies for MATHUSLA, which help inform a first detector-design concept utilizing modular construction with Resistive Plate Chambers (RPCs) as the primary tracking technology. We present first efficiency and reconstruction studies to verify the viability of this design concept, and we explore some aspects of its total cost. We end with a summary of recent progress made on the MATHUSLA test stand, a small-scale demonstrator experiment currently taking data at CERN Point 1, and finish with a short comment on future work. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Report number: CERN-LHCC-2018-025, LHCC-I-031

RPC performance vs FE electoronics and detector parameters

Authors: R. Cardarelli, G. Aielli, E. Alunno Camelia, S. Bruno, A. Caltabiano, P. Camarri, A. Di Ciaccio, B. Liberti, L. Massa, L. Pizzimento, A. Rocchi

Abstract: The first Resistive Plate Chambers detectors were developed for cosmic ray experiments, where low rate capability, good time resolution and low cost per unit of area were needed. These same features, except for the low rate capability, were required in the muon spectrometers of the collider experiments like LHC. For this purpose newRPCdetectors with increased rate capability were developed. The ra… ▽ More The first Resistive Plate Chambers detectors were developed for cosmic ray experiments, where low rate capability, good time resolution and low cost per unit of area were needed. These same features, except for the low rate capability, were required in the muon spectrometers of the collider experiments like LHC. For this purpose newRPCdetectors with increased rate capability were developed. The rate capability improvement has been achieved thanks to the transition from streamer to saturated avalanche regime, in which the average charge produced in the gas dicharge is smaller. The price to pay for this working mode switch is the transfer of the amplification from the detector to the FE electorinics. The High luminosity LHC and the future colliders will require even greater rate capability in the muon spectrometer compared to the current one. For this reason, further improving of the rate capability is required. The transition from the saturated avalanche to a low saturated avalanche regime moves in this direction and needs a new front end electronics with better signal to noise ratio, because the average induced charge on the electrode is even smaller. The front end electronics design is crucial for the RPC performances. In this paper we discuss the performances of the RPC detector changing the front end design and the detector parameters. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Development of gaseous particle detectors based on semiconductive plate electrodes

Authors: A. Rocchi, R. Cardarelli, G. Aielli, E. Alunno Camelia, S. Bruno, A. Caltabiano, P. Camarri, A. Di Ciaccio, B. Liberti, L. Massa, L. Pizzimento

Abstract: A new particle detector with sub-nanosecond time resolution capable of working in high-rate environment (rate capability of the order of $MHz/ cm^2$) is under developmnet. Semiconductive electrodes with resistivity $ρ$ up to $10^8 Ω\cdot cm$ have been used to improve the RPC [1] [2] rate capability. In this paper efficiency and time resolution of three different detector structures are presented. A new particle detector with sub-nanosecond time resolution capable of working in high-rate environment (rate capability of the order of $MHz/ cm^2$) is under developmnet. Semiconductive electrodes with resistivity $ρ$ up to $10^8 Ω\cdot cm$ have been used to improve the RPC [1] [2] rate capability. In this paper efficiency and time resolution of three different detector structures are presented. △ Less

Submitted 5 July, 2018; originally announced July 2018.

Development of a new Front End electronics in Silicon and Silicon-Germanium technology for the Resistive Plate Chamber detector for high rate experiments

Authors: Luca Pizzimento, Roberto Cardarelli, Giulio Aielli, Elio Alunno Camelia, Salvatore Bruno, Alessandro Caltabiano, Paolo Camarri, Anna Di Ciaccio, Barbara Liberti, Lorenzo Massa, Alessandro Rocchi

Abstract: The upgrade of the Resistive Plate Chamber (RPC) detector, in order to increase the detector rate capability and to be able to work efficiently in high rate environment, consists in the reduction of the operating voltage along with the detection of signals which are few hundred μV small. The approach chosen by this project to achieve this objective is to develop a new kind of Front End electronics… ▽ More The upgrade of the Resistive Plate Chamber (RPC) detector, in order to increase the detector rate capability and to be able to work efficiently in high rate environment, consists in the reduction of the operating voltage along with the detection of signals which are few hundred μV small. The approach chosen by this project to achieve this objective is to develop a new kind of Front End electronics which, thanks to a mixed technology in Silicon and Silicon-Germanium, enhance the detector performances increasing its rate capability. The Front End developed is composed by a preamplifier in Silicon BJT technology with a very low inner noise (1000 $e^{-}$ rms) and an amplification factor of 0.3-0.4 mV/fC and a new kind of discriminator in SiGe HJT technology which allows a minimum threshold of the order of 0.5 mV. The performances of this kind of Front End will be shown. The results are obtained by using the CERN H8 beamline with a full-size RPC chamber of 1 mm gas gap and 1.2 mm thickness of electrodes equipped with this kind of Front End electronics. △ Less

Submitted 11 June, 2018; originally announced June 2018.

Comments: 14th Workshop on Resistive Plate Chambers and Related Detectors 19-23 February, 2018 Puerto Vallarta, Jalisco state, Mexico

Journal ref: Journal of Instrumentation, Volume 14, October 2019

Design a TDC in SiGe for RPC's electronics Front-end for the use in a high-rate experiment

Authors: Salvatore Bruno, Roberto Cardarelli, Giulio Aielli, davide Badoni, Paolo Camarri, Anna Di Ciaccio, Eelio Alunno Camelia, Alessandro Caltabiano, Lorenzo Massa, Lorenzo Paolozzi, Luca Pizzimento, Alessandro Rocchi

Abstract: With the new generation of the RPC, it is possible to work with induced signals of hundreds $μV$, hence the front-end electronics is an important and delicate part of the detector in order to get a detectable signal. The electronic chain is made up of an amplifier, a discriminator, a TDC. The new front-end is realized with the use of silicon-germanium (SiGe) components, provided by IHP microelectr… ▽ More With the new generation of the RPC, it is possible to work with induced signals of hundreds $μV$, hence the front-end electronics is an important and delicate part of the detector in order to get a detectable signal. The electronic chain is made up of an amplifier, a discriminator, a TDC. The new front-end is realized with the use of silicon-germanium (SiGe) components, provided by IHP microelectronics. With this technology we can implement BJT and CMOS transistors on the same chip. The benefit of this improvement is to minimize: power consumption of the channels ($2 ÷3$ $ \frac{mW}{ch}$), noise (500 $e^-$ r.m.s), radiation hardness (10 kGy,$10^3$ $\frac{n}{cm}$) and it maximizes the speed of response electronics. In this work I will highlight the first TDC prototypes' results. The TDC uses a local oscillator, that has an oscillation range between $0.6 ÷3 $ GHz, and a the temporal jitter of 15 ps. The data output from the TDC are presented in binary in order to lighten data processing to the acquisition system. Moreover, we are studying a way to minimize system latency. This optimization involves the addition of a serializer (PISO) that sends the TDC data output to the acquisition system at 2 GHz. △ Less

Submitted 21 June, 2018; v1 submitted 11 June, 2018; originally announced June 2018.

Comments: 7 pages, 11 figures, RPC conference 2018, JINST 2018

Optimization of RPCs read-out panel with electromagnetic simulation

Authors: E. Alunno Camelia, R. Cardarelli, A. Di Ciaccio, S. Bruno, A. Caltabiano, P. Camarri, B. Liberti, L. Massa, L. Pizzimento, A. Rocchi

Abstract: With the upgrade of the RPCs [1]-[2] and the increase of its performances, the study and the optimization of the read-out panel is necessary in order to maintain the signal integrity and to reduce the intrinsic crosstalk. Through Electromagnetic Simulation, performed with CST Studio Suite, new panels design are tested and their crosstalk property are studied. The behavior of different type of pane… ▽ More With the upgrade of the RPCs [1]-[2] and the increase of its performances, the study and the optimization of the read-out panel is necessary in order to maintain the signal integrity and to reduce the intrinsic crosstalk. Through Electromagnetic Simulation, performed with CST Studio Suite, new panels design are tested and their crosstalk property are studied. The behavior of different type of panel is shown, in particular a panel with the decoupling strip connected through their characteristic impedance to the ground plane is simulated. △ Less

Submitted 11 June, 2018; originally announced June 2018.

Test beam measurement of the first prototype of the fast silicon pixel monolithic detector for the TT-PET project

Authors: L. Paolozzi, Y. Bandi, M. Benoit, R. Cardarelli, S. Débieux, D. Forshaw, D. Hayakawa, G. Iacobucci, M. Kaynak, A. Miucci, M. Nessi, O. Ratib, E. Ripiccini, H. Rücker, P. Valerio, M. Weber

Abstract: The TT-PET collaboration is develo** a PET scanner for small animals with 30 ps time-of-flight resolution and sub-millimetre 3D detection granularity. The sensitive element of the scanner is a monolithic silicon pixel detector based on state-of-the-art SiGe BiCMOS technology. The first ASIC prototype for the TT-PET was produced and tested in the laboratory and with minimum ionizing particles. Th… ▽ More The TT-PET collaboration is develo** a PET scanner for small animals with 30 ps time-of-flight resolution and sub-millimetre 3D detection granularity. The sensitive element of the scanner is a monolithic silicon pixel detector based on state-of-the-art SiGe BiCMOS technology. The first ASIC prototype for the TT-PET was produced and tested in the laboratory and with minimum ionizing particles. The electronics exhibit an equivalent noise charge below 600 e- RMS and a pulse rise time of less than 2 ns, in accordance with the simulations. The pixels with a capacitance of 0.8 pF were measured to have a detection efficiency greater than 99% and, although in the absence of the post-processing, a time resolution of approximately 200 ps. △ Less

Submitted 6 February, 2018; v1 submitted 5 February, 2018; originally announced February 2018.

Improving the RPC rate capability

Authors: G. Aielli, P. Camarri, R. Cardarelli, A. Di Ciaccio, L. Di Stante, R. Iuppa, B. Liberti, L. Paolozzi, E. Pastori, R. Santonico, M. Toppi

Abstract: This paper has the purpose to study the rate capability of the Resistive Plate Chamber, RPC, starting from the basic physics of this detector. The effect of different working parameters determining the rate capability is analysed in detail, in order to optimize a new family of RPCs for applications to heavy irradiation environments and in particular to the LHC phase 2. A special emphasis is given… ▽ More This paper has the purpose to study the rate capability of the Resistive Plate Chamber, RPC, starting from the basic physics of this detector. The effect of different working parameters determining the rate capability is analysed in detail, in order to optimize a new family of RPCs for applications to heavy irradiation environments and in particular to the LHC phase 2. A special emphasis is given to the improvement achievable by minimizing the avalanche charge delivered in the gas. The paper shows experimental results of Cosmic Ray tests, performed to study the avalanche features for different gas gap sizes, with particular attention to the overall delivered charge. For this purpose, the paper studies, in parallel to the prompt electronic signal, also the ionic signal which gives the main contribution to the delivered charge. Whenever possible the test results are interpreted on the base of the RPC detector physics and are intended to extend and reinforce our physical understanding of this detector. △ Less

Submitted 10 June, 2016; originally announced June 2016.

Comments: Submitted to JINST Journal of Instrumentation for pubblication

100ps time resolution with thin silicon pixel detectors and a SiGe HBT amplifier

Authors: Mathieu Benoit, Roberto Cardarelli, Stéphane Débieux, Yannick Favre, Giuseppe Iacobucci, Marzio Nessi, Lorenzo Paolozzi, Kenji Shu

Abstract: A 100um thick silicon detector with 1mm2 pad readout optimized for sub-nanosecond time resolution has been developed and tested. Coupled to a purposely developed amplifier based on SiGe HBT technology, this detector was characterized at the H8 beam line at the CERN SPS. An excellent time resolution of (106+-1)ps for silicon detectors was measured with minimum ionizing particles. A 100um thick silicon detector with 1mm2 pad readout optimized for sub-nanosecond time resolution has been developed and tested. Coupled to a purposely developed amplifier based on SiGe HBT technology, this detector was characterized at the H8 beam line at the CERN SPS. An excellent time resolution of (106+-1)ps for silicon detectors was measured with minimum ionizing particles. △ Less

Submitted 13 November, 2015; originally announced November 2015.

Response of diamond detector sandwich to 14 MeV neutrons

Authors: M. Osipenko, M. Ripani, G. Ricco, B. Caiffi, F. Pompili, M. Pillon, G. Verona-Rinati, R. Cardarelli

Abstract: In this paper we present the measurement of the response of 50 $μ$m thin diamond detectors to 14 MeV neutrons. Such neutrons are produced in fusion reactors and are of particular interest for ITER neutron diagnostics. Among semiconductor detectors diamond has properties most appropriate for harsh radiation and temperature conditions of a fusion reactor. However, 300-500 $μ$m thick diamond detector… ▽ More In this paper we present the measurement of the response of 50 $μ$m thin diamond detectors to 14 MeV neutrons. Such neutrons are produced in fusion reactors and are of particular interest for ITER neutron diagnostics. Among semiconductor detectors diamond has properties most appropriate for harsh radiation and temperature conditions of a fusion reactor. However, 300-500 $μ$m thick diamond detectors suffer significant radiation damage already at neutron fluences of the order of $10^{14}$ n/cm$^2$. It is expected that a 50 $μ$m thick diamond will withstand a fluence of $>10^{16}$ n/cm$^2$. We tested two 50 $μ$m thick single crystal CVD diamonds, stacked to form a "sandwich" detector for coincidence measurements. The detector measured the conversion of 14 MeV neutrons, im**ing on one diamond, into $α$ particles which were detected in the second diamond in coincidence with nuclear recoil. For $^{12}C(n,α)^{9}Be$ reaction the total energy deposited in the detector gives access to the initial neutron energy value. The measured 14 MeV neutron detection sensitivity through this reaction by a detector of effective area 3$\times$3 mm$^2$ was $5\times 10^{-7}$ counts cm$^2$/n. This value is in good agreement with Geant4 simulations. The intrinsic energy resolution of the detector was found to be 240 keV FWHM which adds only 10 % to ITER's 14 MeV neutron energy spread. △ Less

Submitted 2 November, 2015; v1 submitted 19 October, 2015; originally announced October 2015.

Comments: submitted in NIM A

Study of the diffuse gamma-ray emission from the Galactic plane with ARGO-YBJ

Authors: B. Bartoli, P. Bernardini, X. J. Bi, P. Branchini, A. Budano, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, S. Z. Chen, T. L. Chen, P. Creti, S. W. Cui, B. Z. Dai, A. D'Amone, Danzengluobu, I. De Mitri, B. D'Ettorre Piazzoli, T. Di Girolamo, G. Di Sciascio, C. F. Feng, Zhaoyang Feng, Zhenyong Feng, Q. B. Gou, Y. Q. Guo , et al. (56 additional authors not shown)

Abstract: The events recorded by ARGO-YBJ in more than five years of data collection have been analyzed to determine the diffuse gamma-ray emission in the Galactic plane at Galactic longitudes 25° < l < 100° and Galactic latitudes . The energy range covered by this analysis, from ~350 GeV to ~2 TeV, allows the connection of the region explored by Fermi with the multi-TeV measurements carried out by Milagro.… ▽ More The events recorded by ARGO-YBJ in more than five years of data collection have been analyzed to determine the diffuse gamma-ray emission in the Galactic plane at Galactic longitudes 25° < l < 100° and Galactic latitudes . The energy range covered by this analysis, from ~350 GeV to ~2 TeV, allows the connection of the region explored by Fermi with the multi-TeV measurements carried out by Milagro. Our analysis has been focused on two selected regions of the Galactic plane, i.e., 40° < l < 100° and 65° < l < 85° (the Cygnus region), where Milagro observed an excess with respect to the predictions of current models. Great care has been taken in order to mask the most intense gamma-ray sources, including the TeV counterpart of the Cygnus cocoon recently identified by ARGO-YBJ, and to remove residual contributions. The ARGO-YBJ results do not show any excess at sub-TeV energies corresponding to the excess found by Milagro, and are consistent with the predictions of the Fermi model for the diffuse Galactic emission. From the measured energy distribution we derive spectral indices and the differential flux at 1 TeV of the diffuse gamma-ray emission in the sky regions investigated. △ Less

Submitted 24 July, 2015; originally announced July 2015.

Comments: 11 pages, 6 figures, published in APJ

Journal ref: The Astrophysical Journal, 806:20 (11pp), 2015 June 10

Neutron spectrometer for fast nuclear reactors

Authors: M. Osipenko, M. Ripani, G. Ricco, B. Caiffi, F. Pompili, M. Pillon, M. Angelone, G. Verona-Rinati, R. Cardarelli, G. Mila, S. Argiro

Abstract: In this paper we describe the development and first tests of a neutron spectrometer designed for high flux environments, such as the ones found in fast nuclear reactors. The spectrometer is based on the conversion of neutrons im**ing on $^6$Li into $α$ and $t$ whose total energy comprises the initial neutron energy and the reaction $Q$-value. The $^6$LiF layer is sandwiched between two CVD diamo… ▽ More In this paper we describe the development and first tests of a neutron spectrometer designed for high flux environments, such as the ones found in fast nuclear reactors. The spectrometer is based on the conversion of neutrons im**ing on $^6$Li into $α$ and $t$ whose total energy comprises the initial neutron energy and the reaction $Q$-value. The $^6$LiF layer is sandwiched between two CVD diamond detectors, which measure the two reaction products in coincidence. The spectrometer was calibrated at two neutron energies in well known thermal and 3 MeV neutron fluxes. The measured neutron detection efficiency varies from 4.2$\times 10^{-4}$ to 3.5$\times 10^{-8}$ for thermal and 3 MeV neutrons, respectively. These values are in agreement with Geant4 simulations and close to simple estimates based on the knowledge of the $^6$Li(n,$α$)$t$ cross section. The energy resolution of the spectrometer was found to be better than 100 keV when using 5 m cables between the detector and the preamplifiers. △ Less

Submitted 25 May, 2015; originally announced May 2015.

Comments: submitted to NIM

Test of a prototype neutron spectrometer based on diamond detectors in a fast reactor

Authors: M. Osipenko, F. Pompili, M. Ripani, M. Pillon, G. Ricco, B. Caiffi, R. Cardarelli, G. Verona-Rinati, S. Argiro

Abstract: A prototype of neutron spectrometer based on diamond detectors has been developed. This prototype consists of a $^6$Li neutron converter sandwiched between two CVD diamond crystals. The radiation hardness of the diamond crystals makes it suitable for applications in low power research reactors, while a low sensitivity to gamma rays and low leakage current of the detector permit to reach good energ… ▽ More A prototype of neutron spectrometer based on diamond detectors has been developed. This prototype consists of a $^6$Li neutron converter sandwiched between two CVD diamond crystals. The radiation hardness of the diamond crystals makes it suitable for applications in low power research reactors, while a low sensitivity to gamma rays and low leakage current of the detector permit to reach good energy resolution. A fast coincidence between two crystals is used to reject background. The detector was read out using two different electronic chains connected to it by a few meters of cable. The first chain was based on conventional charge-sensitive amplifiers, the other used a custom fast charge amplifier developed for this purpose. The prototype has been tested at various neutron sources and showed its practicability. In particular, the detector was calibrated in a TRIGA thermal reactor (LENA laboratory, University of Pavia) with neutron fluxes of $10^8$ n/cm$^2$s and at the 3 MeV D-D monochromatic neutron source named FNG (ENEA, Rome) with neutron fluxes of $10^6$ n/cm$^2$s. The neutron spectrum measurement was performed at the TAPIRO fast research reactor (ENEA, Casaccia) with fluxes of 10$^9$ n/cm$^2$s. The obtained spectra were compared to Monte Carlo simulations, modeling detector response with MCNP and Geant4. △ Less

Submitted 23 May, 2015; originally announced May 2015.

Comments: ANIMMA 2015 Conference proceedings, 20-24 April 2015, Lisbon, Portugal

Search for GeV Gamma Ray Bursts with the ARGO-YBJ Detector: Summary of Eight Years of Observations

Authors: B. Bartoli, P. Bernardini, X. J. Bi, P. Branchini, A. Budano, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, S. Z. Chen, T. L. Chen, P. Creti, S. W. Cui, B. Z. Dai, A. D'Amone, Danzengluobu, I. De Mitri, B. D'Ettorre Piazzoli, T. Di Girolamo, G. Di Sciascio, C. F. Feng, Zhaoyang Feng, Zhenyong Feng, Q. B. Gou, Y. Q. Guo , et al. (56 additional authors not shown)

Abstract: The search for Gamma Ray Burst (GRB) emission in the energy range 1-100 GeV in coincidence with the satellite detection has been carried out using the Astrophysical Radiation with Ground-based Observatory at YangBa**g (ARGO-YBJ) experiment. The high altitude location (4300 m a.s.l.), the large active surface ($\sim$ 6700 m$^2$ of Resistive Plate Chambers), the wide field of view ($\sim 2~$sr, lim… ▽ More The search for Gamma Ray Burst (GRB) emission in the energy range 1-100 GeV in coincidence with the satellite detection has been carried out using the Astrophysical Radiation with Ground-based Observatory at YangBa**g (ARGO-YBJ) experiment. The high altitude location (4300 m a.s.l.), the large active surface ($\sim$ 6700 m$^2$ of Resistive Plate Chambers), the wide field of view ($\sim 2~$sr, limited only by the atmospheric absorption) and the high duty cycle ($>$ 86 %) make the ARGO-YBJ experiment particularly suitable to detect short and unexpected events like GRBs. With the scaler mode technique, i.e., counting all the particles hitting the detector with no measurement of the primary energy and arrival direction, the minimum threshold of $\sim$ 1 GeV can be reached, overlap** the direct measurements carried out by satellites. During the experiment lifetime, from December 17, 2004 to February 7, 2013, a total of 206 GRBs occurring within the ARGO-YBJ field of view (zenith angle $θ$ $\le$ 45$^{\circ}$) have been analyzed. This is the largest sample of GRBs investigated with a ground-based detector. Two lightcurve models have been assumed and since in both cases no significant excess has been found, the corresponding fluence upper limits in the 1-100 GeV energy region have been derived, with values as low as 10$^{-5}~$erg cm$^{-2}$. The analysis of a subset of 24 GRBs with known redshift has been used to constrain the fluence extrapolation to the GeV region together with possible cutoffs under different assumptions on the spectrum. △ Less

Submitted 19 February, 2015; originally announced February 2015.

Comments: 43 pages, 6 figures, published in APJ

Journal ref: APJ, 794:82 (12pp), 2014 October 10

The Knee of the Cosmic Hydrogen and Helium Spectrum below 1 PeV Measured by ARGO-YBJ and a Cherenkov Telescope of LHAASO

Authors: B. Bartoli, P. Bernardini, X. J. Bi, P. Branchini, A. Budano, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, S. Z. Chen, T. L. Chen, P. Creti, S. W. Cui, B. Z. Dai, A. D'Amone, Danzengluobu, I. De Mitri, B. D'Ettorre Piazzoli, T. Di Girolamo, G. Di Sciascio, C. F. Feng, Zhaoyang Feng, Zhenyong Feng, Q. B. Gou, Y. Q. Guo , et al. (72 additional authors not shown)

Abstract: The measurement of cosmic ray energy spectra, in particular for individual species, is an essential approach in finding their origin. Locating the "knees" of the spectra is an important part of the approach and has yet to be achieved. Here we report a measurement of the mixed Hydrogen and Helium spectrum using the combination of the ARGO-YBJ experiment and of a prototype Cherenkov telescope for th… ▽ More The measurement of cosmic ray energy spectra, in particular for individual species, is an essential approach in finding their origin. Locating the "knees" of the spectra is an important part of the approach and has yet to be achieved. Here we report a measurement of the mixed Hydrogen and Helium spectrum using the combination of the ARGO-YBJ experiment and of a prototype Cherenkov telescope for the LHAASO experiment. A knee feature at 640+/-87 TeV, with a clear steepening of the spectrum, is observed. This gives fundamental inputs to galactic cosmic ray acceleration models. △ Less

Submitted 10 February, 2015; originally announced February 2015.

Identification of the TeV Gamma-ray Source ARGO J2031+4157 with the Cygnus Cocoon

Authors: The ARGO-YBJ Collaboration, :, B. Bartoli, P. Bernardini, X. J. Bi, P. Branchini, A. Budano, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, S. Z. Chen, T. L. Chen, P. Creti, S. W. Cui, B. Z. Dai, A. DAmone, Danzengluobu, I. De Mitri, B. DEttorre Piazzoli, T. Di Girolamo, G. Di Sciascio, C. F. Feng, Zhaoyang Feng, Zhenyong Feng , et al. (59 additional authors not shown)

Abstract: The extended TeV gamma-ray source ARGO J2031+4157 (or MGRO J2031+41) is positionally consistent with the Cygnus Cocoon discovered by $Fermi$-LAT at GeV energies in the Cygnus superbubble. Reanalyzing the ARGO-YBJ data collected from November 2007 to January 2013, the angular extension and energy spectrum of ARGO J2031+4157 are evaluated. After subtracting the contribution of the overlap** TeV so… ▽ More The extended TeV gamma-ray source ARGO J2031+4157 (or MGRO J2031+41) is positionally consistent with the Cygnus Cocoon discovered by $Fermi$-LAT at GeV energies in the Cygnus superbubble. Reanalyzing the ARGO-YBJ data collected from November 2007 to January 2013, the angular extension and energy spectrum of ARGO J2031+4157 are evaluated. After subtracting the contribution of the overlap** TeV sources, the ARGO-YBJ excess map is fitted with a two-dimensional Gaussian function in a square region of $10^{\circ}\times 10^{\circ}$, finding a source extension $σ_{ext}$= 1$^{\circ}$.8$\pm$0$^{\circ}$.5. The observed differential energy spectrum is $dN/dE =(2.5\pm0.4) \times 10^{-11}(E/1 TeV)^{-2.6\pm0.3}$ photons cm$^{-2}$ s$^{-1}$ TeV$^{-1}$, in the energy range 0.2-10 TeV. The angular extension is consistent with that of the Cygnus Cocoon as measured by $Fermi$-LAT, and the spectrum also shows a good connection with the one measured in the 1-100 GeV energy range. These features suggest to identify ARGO J2031+4157 as the counterpart of the Cygnus Cocoon at TeV energies. The Cygnus Cocoon, located in the star-forming region of Cygnus X, is interpreted as a cocoon of freshly accelerated cosmic rays related to the Cygnus superbubble. The spectral similarity with Supernova Remnants indicates that the particle acceleration inside a superbubble is similar to that in a SNR. The spectral measurements from 1 GeV to 10 TeV allows for the first time to determine the possible spectrum slope of the underlying particle distribution. A hadronic model is adopted to explain the spectral energy distribution. △ Less

Submitted 24 June, 2014; originally announced June 2014.

Comments: 16 pages, 3 figures, has been accepted by ApJ for publication

Journal ref: The Astrophysical Journal, 790:152, 2014

Energy Spectrum of Cosmic Protons and Helium Nuclei by a Hybrid Measurement at 4300 m a.s.l

Authors: B. Bartoli, P. Bernardini, X. J. Bi, I. Bolognino, P. Branchini, A. Budano, A. K. Calabrese Melcarne, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, S. Z. Chen, T. L. Chen, P. Creti, S. W. Cui, B. Z. Dai, A. D'Amone, Danzengluobu, I. De Mitri, B. D'Ettorre Piazzoli, T. Di Girolamo, G. Di Sciascio, C. F. Feng, Zhaoyang Feng, Zhenyong Feng , et al. (76 additional authors not shown)

Abstract: The energy spectrum of cosmic Hydrogen and Helium nuclei has been measured, below the so-called "knee", by using a hybrid experiment with a wide field-of-view Cherenkov telescope and the Resistive Plate Chamber (RPC) array of the ARGO-YBJ experiment at 4300 m above sea level. The Hydrogen and Helium nuclei have been well separated from other cosmic ray components by using a multi-parameter techniq… ▽ More The energy spectrum of cosmic Hydrogen and Helium nuclei has been measured, below the so-called "knee", by using a hybrid experiment with a wide field-of-view Cherenkov telescope and the Resistive Plate Chamber (RPC) array of the ARGO-YBJ experiment at 4300 m above sea level. The Hydrogen and Helium nuclei have been well separated from other cosmic ray components by using a multi-parameter technique. A highly uniform energy resolution of about 25% is achieved throughout the whole energy range (100 TeV - 700 TeV). The observed energy spectrum is compatible with a single power law with index gamma=-2.63+/-0.06. △ Less

Submitted 6 February, 2014; v1 submitted 27 January, 2014; originally announced January 2014.

Comments: To be published on Chinese Physics C

TeV gamma-ray survey of the Northern sky using the ARGO-YBJ detector

Authors: The ARGO-YBJ Collaboration, :, B. Bartoli, P. Bernardini, X. J. Bi, I. Bolognino, P. Branchini, A. Budano, A. K. Calabrese Melcarne, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, S. Z. Chen, T. L. Chen, Y. Chen, P. Creti, S. W. Cui, B. Z. Dai, A. DAmone, Danzengluobu, I. De Mitri, B. DEttorre Piazzoli, T. Di Girolamo, X. H. Ding , et al. (73 additional authors not shown)

Abstract: The ARGO-YBJ detector is an extensive air shower array that has been used to monitor the northern $γ$-ray sky at energies above 0.3 TeV from 2007 November to 2013 January. In this paper, we present the results of a sky survey in the declination band from $-10^{\circ}$ to $70^{\circ}$, using data recorded over the past five years. With an integrated sensitivity ranging from 0.24 to $\sim$1 Crab uni… ▽ More The ARGO-YBJ detector is an extensive air shower array that has been used to monitor the northern $γ$-ray sky at energies above 0.3 TeV from 2007 November to 2013 January. In this paper, we present the results of a sky survey in the declination band from $-10^{\circ}$ to $70^{\circ}$, using data recorded over the past five years. With an integrated sensitivity ranging from 0.24 to $\sim$1 Crab units depending on the declination, six sources have been detected with a statistical significance greater than 5 standard deviations. Several excesses are also reported as potential $γ$-ray emitters. The features of each source are presented and discussed. Additionally, $95\%$ confidence level upper limits of the flux from the investigated sky region are shown. Specific upper limits for 663 GeV $γ$-ray AGNs inside the ARGO-YBJ field of view are reported. The effect of the absorption of $γ$-rays due to the interaction with extragalactic background light is estimated. △ Less

Submitted 13 November, 2013; originally announced November 2013.

Comments: 30 pages, 13 figures, Accepted for publication by ApJ

Journal ref: The Astrophysical Journal, 779:27 (10pp), 2013 December 10

SuperB Technical Design Report

Authors: SuperB Collaboration, M. Baszczyk, P. Dorosz, J. Kolodziej, W. Kucewicz, M. Sapor, A. Jeremie, E. Grauges Pous, G. E. Bruno, G. De Robertis, D. Diacono, G. Donvito, P. Fusco, F. Gargano, F. Giordano, F. Loddo, F. Loparco, G. P. Maggi, V. Manzari, M. N. Mazziotta, E. Nappi, A. Palano, B. Santeramo, I. Sgura, L. Silvestris , et al. (384 additional authors not shown)

Abstract: In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch… ▽ More In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented. A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012. △ Less

Submitted 24 June, 2013; originally announced June 2013.

Comments: 495 pages

Report number: INFN-13-01/PI, LAL 13-01, SLAC-R-1003

Observation of TeV gamma-rays from the unidentified source HESS J1841-055 with the ARGO-YBJ experiment

Authors: The ARGO-YBJ Collaboration, B. Bartoli, P. Bernardini, X. J. Bi, I. Bolognino, P. Branchini, A. Budano, A. K. Calabrese Melcarne, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, C. Cattaneo, S. Z. Chen, T. L. Chen, Y. Chen, P. Creti, S. W. Cui, B. Z. Dai, G. DAli Staiti, A. DAmone, Danzengluobu, I. De Mitri, B. DEttorre Piazzoli, T. Di Girolamo , et al. (78 additional authors not shown)

Abstract: We report the observation of a very high energy γ-ray source, whose position is coincident with HESS J1841-055. This source has been observed for 4.5 years by the ARGO-YBJ experiment from November 2007 to July 2012. Its emission is detected with a statistical significance of 5.3 standard deviations. Parameterizing the source shape with a two-dimensional Gaussian function we estimate an extension σ… ▽ More We report the observation of a very high energy γ-ray source, whose position is coincident with HESS J1841-055. This source has been observed for 4.5 years by the ARGO-YBJ experiment from November 2007 to July 2012. Its emission is detected with a statistical significance of 5.3 standard deviations. Parameterizing the source shape with a two-dimensional Gaussian function we estimate an extension σ=(0.40(+0.32,-0.22}) degree, consistent with the HESS measurement. The observed energy spectrum is dN/dE =(9.0-+1.6) x 10^{-13}(E/5 TeV)^{-2.32-+0.23} photons cm^{-2} s^{-1} TeV^{-1}, in the energy range 0.9-50 TeV. The integral γ-ray flux above 1 TeV is 1.3-+0.4 Crab units, which is 3.2-+1.0 times the flux derived by HESS. The differences in the flux determination between HESS and ARGO-YBJ, and possible counterparts at other wavelengths are discussed. △ Less

Submitted 6 March, 2013; originally announced March 2013.

Comments: 17 pages, 4 figures, have been accepted for publication in ApJ

Journal ref: The Astrophysical Journal, 767:99 (2013)

Studies on fast triggering and high precision tracking with Resistive Plate Chambers

Authors: G. Aielli, B. Bilki, R. Ball, J. W. Chapman, R. Cardarelli, T. Dai, E. Diehl, J. Dubbert, C. Ferretti, H. Feng, K. Francis, L. Guan, L. Han, S. Hou, D. Levin, B. Li, L. Liu, L. Paolozzi, J. Repond, J. Roloff, R. Santonico, H. Y. Song, X. L. Wang, Y. Wu, L. Xia , et al. (5 additional authors not shown)

Abstract: We report on studies of fast triggering and high-precision tracking using Resistive Plate Chambers (RPCs). Two beam tests were carried out with the 180 GeV muon beam at CERN using RPCs with gas gaps of 1.00 or 1.15 mm and equipped with readout strips with 1.27 mm pitch. This is the first beam test of RPCs with fine-pitch readout strips that explores simultaneously precision tracking and triggering… ▽ More We report on studies of fast triggering and high-precision tracking using Resistive Plate Chambers (RPCs). Two beam tests were carried out with the 180 GeV muon beam at CERN using RPCs with gas gaps of 1.00 or 1.15 mm and equipped with readout strips with 1.27 mm pitch. This is the first beam test of RPCs with fine-pitch readout strips that explores simultaneously precision tracking and triggering capabilities. RPC signals were acquired with precision timing and charge integrating readout electronics at both ends of the strips. The time resolution was measured to be better than 600 ps and the average spatial resolution was found to be 220 um using charge information and 287 um using timing information. The dual-ended readout allows the determination of the average and the difference of the signal arrival times. The average time was found to be independent of the incident particle position along the strip and is useful for triggering purposes. The time difference yielded a determination of the hit position with a precision of 7.5 mm along the strip. These results demonstrate the feasibility using RPCs for fast and high-resolution triggering and tracking. △ Less

Submitted 24 October, 2012; originally announced October 2012.

Comments: 7 pages, 11 figures, submitted to Nucl. Instru. Meth

Long-term Monitoring on Mrk 501 for Its VHE gamma Emission and a Flare in October 2011

Authors: The ARGO-YBJ Collaboration, B. Bartoli, P. Bernardini, X. J. Bi, C. Bleve, I. Bolognino, P. Branchini, A. Budano, A. K. Calabrese Melcarne, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, C. Cattaneo, S. Z. Chen, T. L. Chen, Y. Chen, P. Creti, S. W. Cui, B. Z. Dai, G. DAl Staiti, Danzengluobu, M. Dattoli, I. De Mitri, B. D Ettorre Piazzoli , et al. (79 additional authors not shown)

Abstract: As one of the brightest active blazars in both X-ray and very high energy $γ$-ray bands, Mrk 501 is very useful for physics associated with jets from AGNs. The ARGO-YBJ experiment is monitoring it for $γ$-rays above 0.3 TeV since November 2007. Starting from October 2011 the largest flare since 2005 is observed, which lasts to about April 2012. In this paper, a detailed analysis is reported. Durin… ▽ More As one of the brightest active blazars in both X-ray and very high energy $γ$-ray bands, Mrk 501 is very useful for physics associated with jets from AGNs. The ARGO-YBJ experiment is monitoring it for $γ$-rays above 0.3 TeV since November 2007. Starting from October 2011 the largest flare since 2005 is observed, which lasts to about April 2012. In this paper, a detailed analysis is reported. During the brightest $γ$-rays flaring episodes from October 17 to November 22, 2011, an excess of the event rate over 6 $σ$ is detected by ARGO-YBJ in the direction of Mrk 501, corresponding to an increase of the $γ$-ray flux above 1 TeV by a factor of 6.6$\pm$2.2 from its steady emission. In particular, the $γ$-ray flux above 8 TeV is detected with a significance better than 4 $σ$. Based on time-dependent synchrotron self-Compton (SSC) processes, the broad-band energy spectrum is interpreted as the emission from an electron energy distribution parameterized with a single power-law function with an exponential cutoff at its high energy end. The average spectral energy distribution for the steady emission is well described by this simple one-zone SSC model. However, the detection of $γ$-rays above 8 TeV during the flare challenges this model due to the hardness of the spectra. Correlations between X-rays and $γ$-rays are also investigated. △ Less

Submitted 4 September, 2012; originally announced September 2012.

Comments: have been accepted for publication at ApJ

Journal ref: The Astrophysical Journal, 758, 2, (2012)

Observation of TeV gamma rays from the Cygnus region with the ARGO-YBJ experiment

Authors: B. Bartoli, P. Bernardini, X. J. Bi, C. Bleve, I. Bolognino, P. Branchini, A. Budano, A. K. Calabrese Melcarne, P. Camarri, Z. Cao, R. Cardarelli, S. Catalanotti, C. Cattaneo, S. Z. Chen, T. L. Chen, Y. Chen, P. Creti, S. W. Cui, B. Z. Dai, G. D'Alí Staiti, Danzengluobu, M. Dattoli, I. De Mitri, B. D'Ettorre Piazzoli, T. Di Girolamo , et al. (78 additional authors not shown)

Abstract: We report the observation of TeV gamma-rays from the Cygnus region using the ARGO-YBJ data collected from 2007 November to 2011 August. Several TeV sources are located in this region including the two bright extended MGRO J2019+37 and MGRO J2031+41. According to the Milagro data set, at 20 TeV MGRO J2019+37 is the most significant source apart from the Crab Nebula. No signal from MGRO J2019+37 is… ▽ More We report the observation of TeV gamma-rays from the Cygnus region using the ARGO-YBJ data collected from 2007 November to 2011 August. Several TeV sources are located in this region including the two bright extended MGRO J2019+37 and MGRO J2031+41. According to the Milagro data set, at 20 TeV MGRO J2019+37 is the most significant source apart from the Crab Nebula. No signal from MGRO J2019+37 is detected by the ARGO-YBJ experiment, and the derived flux upper limits at 90% confidence level for all the events above 600 GeV with medium energy of 3 TeV are lower than the Milagro flux, implying that the source might be variable and hard to be identified as a pulsar wind nebula. The only statistically significant (6.4 standard deviations) gamma-ray signal is found from MGRO J2031+41, with a flux consistent with the measurement by Milagro. △ Less

Submitted 10 January, 2012; originally announced January 2012.

Comments: 14 pages, 4 figures

Journal ref: The Astrophysical Journal Letters, 745:L22 (5pp), 2012