-
Chemical Vapour Deposition Graphene-PMMA Nanolaminates for Flexible Gas Barrier
Authors:
Antonio Baldanza,
Maria Giovanna Pastore Carbone,
Cosimo Brondi,
Anastasios C. Manikas,
Giuseppe Mensitieri,
Christos Pavlou,
Giuseppe Scherillo,
Costas Galiotis
Abstract:
Successful ways of fully exploiting the excellent structural and multifunctional performance of graphene and related materials are of great scientific and technological interest. New opportunities are provided by the fabrication of a novel class of nanocomposites with a nanolaminate architecture. In this work, by using the iterative lift-off/float-on process combined with wet depositions, we incor…
▽ More
Successful ways of fully exploiting the excellent structural and multifunctional performance of graphene and related materials are of great scientific and technological interest. New opportunities are provided by the fabrication of a novel class of nanocomposites with a nanolaminate architecture. In this work, by using the iterative lift-off/float-on process combined with wet depositions, we incorporated cm-size graphene monolayers produced via Chemical Vapour Deposition into a poly (methyl methacrylate) (PMMA) matrix with a controlled, alternate-layered structure. The produced nanolaminate shows a significant improvement in mechanical properties, with enhanced stiffness, strength and toughness, with the addition of only 0.06 vol% of graphene. Furthermore, oxygen and carbon dioxide permeability measurements performed at different relative humidity levels, reveal that the addition of graphene leads to significant reduction of permeability, compared to neat PMMA. Overall, we demonstrate that the produced graphene-PMMA nanolaminate surpasses, in terms of gas barrier properties, the traditional discontinuous graphene-particle composites with a similar filler content. Moreover, we found that the gas permeability through the nanocomposites departs from a monotonic decrease as a function of relative humidity, which is instead evident in the case of the pure PMMA nanolaminate. This work suggests the possible use of Chemical Vapour Deposition graphene-polymer nanolaminates as a flexible gas barrier, thus enlarging the spectrum of applications for this novel material.
△ Less
Submitted 22 August, 2022;
originally announced September 2022.
-
Effective EMI shielding behaviour of thin graphene/PMMA nanolaminates in the THz range
Authors:
Christos Pavlou,
Maria Giovanna Pastore Carbone,
Anastasios C Manikas,
George Trakakis,
Can Koral,
Gianpaolo Papari,
Antonello Andreone,
Costas Galiotis
Abstract:
The use of graphene in a form of discontinuous flakes in polymer composites limits the full exploitation of the unique properties of graphene, thus requiring high filler loadings for achieving - for example - satisfactory electrical and mechanical properties. Herein centimetre-scale CVD graphene/polymer nanolaminates have been produced by using an iterative 'lift-off/float-on' process and have bee…
▽ More
The use of graphene in a form of discontinuous flakes in polymer composites limits the full exploitation of the unique properties of graphene, thus requiring high filler loadings for achieving - for example - satisfactory electrical and mechanical properties. Herein centimetre-scale CVD graphene/polymer nanolaminates have been produced by using an iterative 'lift-off/float-on' process and have been found to outperform, for the same graphene content, state-of-the-art flake-based graphene polymer composites in terms of mechanical reinforcement and electrical properties. Most importantly these thin laminate materials show a high electromagnetic interference (EMI) shielding effectiveness, reaching 60 dB for a small thickness of 33 micron, and an absolute EMI shielding effectiveness close to 3* 10 ^5 dB cm ^2 g^-1 which is amongst the highest values for synthetic, non-metallic materials produced to date.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Wettability of graphene by molten polymers
Authors:
Maria Giovanna Pastore Carbone,
Daniele Tammaro,
Anastasios C. Manikas,
George Paterakis,
Ernesto Di Maio,
Costas Galiotis
Abstract:
Graphene wetting by polymers is a critical issue to both the success of polymer-aided transfer of large size sheets onto specific substrates and to the development of well performing nanocomposites. Here we show for the first time that high temperature contact angle measurements can be performed to investigate the wettability of CVD graphene by molten polymers. In particular, poly(methyl methacryl…
▽ More
Graphene wetting by polymers is a critical issue to both the success of polymer-aided transfer of large size sheets onto specific substrates and to the development of well performing nanocomposites. Here we show for the first time that high temperature contact angle measurements can be performed to investigate the wettability of CVD graphene by molten polymers. In particular, poly(methyl methacrylate), a widely used polymer support for CVD graphene transfer, has been adopted herein for this proof-of-concept study and the values of contact angle and work of adhesion have been provided in the temperature range 170-200 °C.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Thermoplastic polyurethane-graphene nanoplatelets microcellular foams for electromagnetic interference shielding
Authors:
Maria Giovanna Pastore Carbone,
Maxime Beaugendre,
Can Koral,
Anastasios C. Manikas,
Nikolaos Koutroumanis,
Gian Paolo Papari,
Antonello Andreone,
Ernesto Di Maio,
Costas Galiotis
Abstract:
The incorporation of graphene-related materials as nanofiller can produce multifunctional foams with enhanced specific properties and density reduction. Herein we report on the preparation of microcellular thermoplastic polyurethane/graphene foams by batch foaming. Solution blending was first adopted to disperse graphene nanoplatelets (GNP) in the elastomeric matrix. Then, a foaming process based…
▽ More
The incorporation of graphene-related materials as nanofiller can produce multifunctional foams with enhanced specific properties and density reduction. Herein we report on the preparation of microcellular thermoplastic polyurethane/graphene foams by batch foaming. Solution blending was first adopted to disperse graphene nanoplatelets (GNP) in the elastomeric matrix. Then, a foaming process based on the use of supercritical CO2 was adopted to produce the microcellular TPU/GNP composite foams with graphene content up to 1 wt%. The EMI shielding behaviour of the TPU/GNP foams has been assessed in the THz range, and has revealed their potential in comparison with other graphene-filled foams presented in the literature, that exhibit similar specific shielding effectiveness but at much higher content of graphene-related materials (10-30 wt%).
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Production and mechanical characterization of graphene micro-ribbons
Authors:
Maria Giovanna Pastore Carbone,
Georgia Tsoukleri,
Anastasios C. Manikas,
Eleni Makarona,
Christos Tsamis,
Costas Galiotis
Abstract:
Patterning of graphene into micro- and nano-ribbons allows for the tunability in emerging fields such as flexible electronic and optoelectronic devices, and is gaining interest for the production of more efficient reinforcement for composite materials. In this work we fabricate micro-ribbons from CVD graphene by combining UV photolithography and dry etching oxygen plasma treatments. Raman spectral…
▽ More
Patterning of graphene into micro- and nano-ribbons allows for the tunability in emerging fields such as flexible electronic and optoelectronic devices, and is gaining interest for the production of more efficient reinforcement for composite materials. In this work we fabricate micro-ribbons from CVD graphene by combining UV photolithography and dry etching oxygen plasma treatments. Raman spectral imaging confirms the effectiveness of the patterning procedure, which is suitable for large-area patterning of graphene on wafer-scale, and confirms that the quality of graphene remains unaltered. The produced micro-ribbons were finally transferred and embedded into a polymeric matrix and the mechanical response was investigated by in-situ mechanical investigation combining Raman spectroscopy and tensile/compressive tests.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Mosaic pattern formation in exfoliated graphene by mechanical deformation
Authors:
Maria Giovanna Pastore Carbone,
Anastasios C. Manikas,
Ioanna Souli,
Chistos Pavlou,
Costas Galiotis
Abstract:
Graphene is susceptible to morphological instabilities such as wrinkles and folds, which result from the imposition of thermo-mechanical stresses upon cooling from high temperatures and/ or under biaxial loading. A particular pattern encountered in CVD graphene is that of mosaic formation. Although it is understood that this pattern results from the severe biaxial compression upon cooling from hig…
▽ More
Graphene is susceptible to morphological instabilities such as wrinkles and folds, which result from the imposition of thermo-mechanical stresses upon cooling from high temperatures and/ or under biaxial loading. A particular pattern encountered in CVD graphene is that of mosaic formation. Although it is understood that this pattern results from the severe biaxial compression upon cooling from high temperatures, it has not been possible to create such a complex pattern at room temperature by mechanical loading. Herein, we have managed by means of lateral wrinkling induced by tension and Euler buckling resulting from uniaxial compression upon unloading, to create such patterns in exfoliated graphene. We also show that these patterns can be used as channels for trap** or administering fluids at interstitial space between graphene and its support. This opens a whole dearth of new applications in the area of nano-fluidics but also in photo-electronics and sensor technologies.
△ Less
Submitted 11 April, 2019;
originally announced April 2019.
