-
A green solvent system for precursor phase-engineered sequential deposition of stable formamidinium lead triiodide for perovskite solar cells
Authors:
Benjamin M. Gallant,
Philippe Holzhey,
Joel A. Smith,
Saqlain Choudhary,
Karim A. Elmestekawy,
Pietro Caprioglio,
Igal Levine,
Alex Sheader,
Fengning Yang,
Daniel T. W. Toolan,
Rachel C. Kilbride,
Augustin K. A. Zaininger,
James M. Ball,
M. Greyson Christoforo,
Nakita Noel,
Laura M. Herz,
Dominik J. Kubicki,
Henry J. Snaith
Abstract:
Perovskite solar cells (PSCs) offer an efficient, inexpensive alternative to current photovoltaic technologies, with the potential for manufacture via high-throughput coating methods. However, challenges for commercial-scale solution-processing of metal-halide perovskites include the use of harmful solvents, the expense of maintaining controlled atmospheric conditions, and the inherent instabiliti…
▽ More
Perovskite solar cells (PSCs) offer an efficient, inexpensive alternative to current photovoltaic technologies, with the potential for manufacture via high-throughput coating methods. However, challenges for commercial-scale solution-processing of metal-halide perovskites include the use of harmful solvents, the expense of maintaining controlled atmospheric conditions, and the inherent instabilities of PSCs under operation. Here, we address these challenges by introducing a high volatility, low toxicity, biorenewable solvent system to fabricate a range of 2D perovskites, which highly effective precursor phases for subsequent transformation to alpha-formamidinium lead triiodide (FAPbI3), fully processed under ambient conditions. PSCs utilising our FAPbI3 reproducibly show remarkable stability under illumination and elevated temperature (ISOS-L-2) and "damp heat" (ISOS-D-3) stressing, surpassing other state-of-the-art perovskite compositions. We determine that this enhancement is a consequence of the 2D precursor phase crystallisation route, which simultaneously avoids retention of residual low-volatility solvents (such as DMF and DMSO) and reduces the rate of degradation of FA+ in the material. Our findings highlight both the critical role of the initial crystallisation process in determining the operational stability of perovskite materials, and that neat FA+-based perovskites can be competitively stable despite the inherent metastability of the alpha-phase.
△ Less
Submitted 14 June, 2024; v1 submitted 12 June, 2024;
originally announced June 2024.
-
Effects of Quantum and Dielectric Confinement on the Emission of Cs-Pb-Br Composites
Authors:
Sebastián Caicedo-Dávila,
Pietro Caprioglio,
Frederike Lehmann,
Sergiu Levcenco,
Martin Stolterfoht,
Dieter Neher,
Leeor Kronik,
Daniel Abou-Ras
Abstract:
The halide perovskite CsPbBr$_3$ belongs to the Cs-Pb-Br material system, which features two additional thermodynamically stable ternary phases, Cs$_4$PbBr$_6$ and CsPb$_2$Br$_5$. The coexistence of these phases and their reportedly similar photoluminescence have resulted in a debate on the nature of the emission in these systems. Here, we combine optical and microscopic characterization with an e…
▽ More
The halide perovskite CsPbBr$_3$ belongs to the Cs-Pb-Br material system, which features two additional thermodynamically stable ternary phases, Cs$_4$PbBr$_6$ and CsPb$_2$Br$_5$. The coexistence of these phases and their reportedly similar photoluminescence have resulted in a debate on the nature of the emission in these systems. Here, we combine optical and microscopic characterization with an effective mass, correlated electron-hole model of excitons in confined systems, to investigate the emission properties of the ternary phases in the Cs-Pb-Br system. We find that all Cs-Pb-Br phases exhibit green emission and the non-perovskite phases exhibit photoluminescence quantum yields orders of magnitude larger than CsPbBr$_3$. In particular, we measure blue- and red-shifted emission for the Cs- and Pb-rich phases, respectively, stemming from embedded CsPbBr$_3$ nanocrystals. Our model reveals that the difference in emission shift is caused by the combined effects of nanocrystal size and different band mismatch. Furthermore, we demonstrate the importance of including the dielectric mismatch in the calculation of the emission energy for Cs-Pb-Br composites. Our results explain the reportedly limited blue shift in CsPbBr$_3$@Cs$_4$PbBr$_6$ composites and rationalize some of its differences with CsPb$_2$Br$_5$.
△ Less
Submitted 21 June, 2023; v1 submitted 14 June, 2023;
originally announced June 2023.
-
Pathways towards 30% efficient single-junction perovskite solar cells and the role of mobile ions
Authors:
Jonas Diekmann,
Pietro Caprioglio,
Moritz H. Futscher,
Vincent M. Le Corre,
Sebastian Reichert,
Frank Jaiser,
Malavika Arvind,
Lorena Perdigon Toro,
Emilio Gutierrez-Partida,
Francisco Pena-Camargo,
Carsten Deibel,
Bruno Ehrler,
Thomas Unold,
Thomas Kirchartz,
Dieter Neher,
Martin Stolterfoht
Abstract:
Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline silicon cells are not well understood. Here, we establish a simulation model that well describes efficient p-i-n type perovskite solar cells and a range of different…
▽ More
Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline silicon cells are not well understood. Here, we establish a simulation model that well describes efficient p-i-n type perovskite solar cells and a range of different experiments. We then study important device and material parameters and we find that an efficiency regime of 30% can be unlocked by optimizing the built-in potential across the perovskite layer by using either highly doped (10^19 cm-3), thick transport layers (TLs) or ultrathin undoped TLs, e.g. self-assembled monolayers. Importantly, we only consider parameters that have been already demonstrated in recent literature, that is a bulk lifetime of 10 us, interfacial recombination velocities of 10 cm/s, a perovskite bandgap of 1.5 eV and an EQE of 95%. A maximum efficiency of 31% is predicted for a bandgap of 1.4 eV. Finally, we demonstrate that the relatively high mobile ion density does not represent a significant barrier to reach this efficiency regime. Thus, the results of this paper promise continuous PCE improvements until perovskites may become the most efficient single-junction solar cell technology in the near future.
△ Less
Submitted 25 April, 2021; v1 submitted 16 October, 2019;
originally announced October 2019.
-
High Open Circuit Voltages in pin-Type Perovskite Solar Cells through Strontium Addition
Authors:
Pietro Caprioglio,
Fengshuo Zu,
Christian M. Wolff,
José A. Márquez Prieto,
Martin Stolterfoht,
Norbert Koch,
Thomas Unold,
Bernd Rech,
Steve Albrecht,
Dieter Neher
Abstract:
The incorporation of even small amounts of strontium (Sr) into lead-based quadruple cation hybrid perovskite solar cells results in a systematic increase of the open circuit voltage (Voc) in pin-type perovskite solar cells. We demonstrate via transient and absolute photoluminescence (PL) experiments how the incorporation of Sr significantly reduces the non-radiative recombination losses in the nea…
▽ More
The incorporation of even small amounts of strontium (Sr) into lead-based quadruple cation hybrid perovskite solar cells results in a systematic increase of the open circuit voltage (Voc) in pin-type perovskite solar cells. We demonstrate via transient and absolute photoluminescence (PL) experiments how the incorporation of Sr significantly reduces the non-radiative recombination losses in the neat perovskite layer and specifically at the perovskite/C60 interface. We show that Sr segregates at the perovskite surface, where it induces important changes of morphology and energetics. Notably, the Sr-enriched surface exhibits a wider band gap and a more n-type character, accompanied with significantly stronger surface band bending. As a result, we observe a significant increase of the quasi-Fermi level splitting in the neat perovskite by reduced surface recombination and more importantly, a strong reduction of losses attributed to non-radiative recombination at the interface to the C60 electron-transporting layer. The resulting solar cells exhibited a Voc of 1.18 V, which could be further improved to nearly 1.23 V through addition of a thin polymer interlayer, bringing the non-radiative voltage loss to only 110 meV. Our work shows that simply adding a small amount of Sr to the precursor solutions induces a beneficial surface modification in the perovskite, without requiring any post treatment, resulting in high efficiency solar cells with power conversion efficiency (PCE) up to 20.3%. Our results demonstrate very high Voc values and efficiencies in Sr-containing quadruple cation perovskite pin solar cells and highlight the imperative importance of addressing and minimizing the recombination losses at the interface between perovskite and charge transporting layer.
△ Less
Submitted 29 October, 2018;
originally announced October 2018.
-
The perovskite/transport layer interfaces dominate non-radiative recombination in efficient perovskite solar cells
Authors:
Martin Stolterfoht,
Pietro Caprioglio,
Christian M. Wolff,
José A. Márquez,
Joleik Nordmann,
Shanshan Zhang,
Daniel Rothhardt,
Ulrich Hörmann,
Alex Redinger,
Lukas Kegelmann,
Steve Albrecht,
Thomas Kirchartz,
Michael Saliba,
Thomas Unold,
Dieter Neher
Abstract:
Charge transport layers (CTLs) are key components of diffusion controlled perovskite solar cells, however, they can induce additional non-radiative recombination pathways which limit the open circuit voltage (V_OC) of the cell. In order to realize the full thermodynamic potential of the perovskite absorber, both the electron and hole transport layer (ETL/HTL) need to be as selective as possible. B…
▽ More
Charge transport layers (CTLs) are key components of diffusion controlled perovskite solar cells, however, they can induce additional non-radiative recombination pathways which limit the open circuit voltage (V_OC) of the cell. In order to realize the full thermodynamic potential of the perovskite absorber, both the electron and hole transport layer (ETL/HTL) need to be as selective as possible. By measuring the quasi-Fermi level splitting (QFLS) of perovskite/CTL heterojunctions, we quantify the non-radiative interfacial recombination current for a wide range of commonly used CTLs, including various hole-transporting polymers, spiro-OMeTAD, metal oxides and fullerenes. We find that all studied CTLs limit the V_OC by inducing an additional non-radiative recombination current that is significantly larger than the loss in the neat perovskite and that the least-selective interface sets the upper limit for the V_OC of the device. The results also show that the V_OC equals the internal QFLS in the absorber layer of (pin, nip) cells with selective CTLs and power conversion efficiencies of up to 21.4%. However, in case of less selective CTLs, the V_OC is substantially lower than the QFLS which indicates additional losses at the contacts and/or interfaces. The findings are corroborated by rigorous device simulations which outline several important considerations to maximize the V_OC. This work shows that the real challenge to supress non-radiative recombination losses in perovskite cells on their way to the radiative limit lies in the suppression of carrier recombination at the perovskite/CTL interfaces.
△ Less
Submitted 22 October, 2018; v1 submitted 2 October, 2018;
originally announced October 2018.
