-
Enhanced ambient stability of exfoliated black phosphorus by passivation with nickel nanoparticles
Authors:
Maria Caporali,
Manuel Serrano-Ruiz,
Francesca Telesio,
Stefan Heun,
Alberto Verdini,
Albano Cossaro,
Matteo Dal Miglio,
Andrea Goldoni,
Maurizio Peruzzini
Abstract:
Since its discovery, the environmental instability of exfoliated black phosphorus (2D bP) has emerged as a challenge that hampers its wide application in chemistry, physics, and materials science. Many studies have been carried out to overcome this drawback. Here we show a relevant enhancement of ambient stability in few-layer bP decorated with nickel nanoparticles as compared to pristine bP. In d…
▽ More
Since its discovery, the environmental instability of exfoliated black phosphorus (2D bP) has emerged as a challenge that hampers its wide application in chemistry, physics, and materials science. Many studies have been carried out to overcome this drawback. Here we show a relevant enhancement of ambient stability in few-layer bP decorated with nickel nanoparticles as compared to pristine bP. In detail, the behavior of the Ni-functionalized material exposed to ambient conditions in the dark is accurately studied by TEM (Transmission Electron Microscopy), Raman Spectroscopy, and high resolution X-ray Photoemission and Absorption Spectroscopy. These techniques provide a morphological and quantitative insight of the oxidation process taking place at the surface of the bP flakes. In the presence of Ni NPs, the decay time of 2D bP to phosphorus oxides is more than three time slower compared to pristine bP, demonstrating an improved structural stability within twenty months of observation.
△ Less
Submitted 1 August, 2019;
originally announced August 2019.
-
A Perspective on Recent Advances in Phosphorene Functionalization and its Application in Devices
Authors:
Maurizio Peruzzini,
Roberto Bini,
Margherita Bolognesi,
Maria Caporali,
Matteo Ceppatelli,
Francesca Cicogna,
Serena Coiai,
Stefan Heun,
Andrea Ienco,
Inigo Iglesias Benito,
Abhishek Kumar,
Gabriele Manca,
Elisa Passaglia,
Demetrio Scelta,
Manuel Serrano-Ruiz,
Francesca Telesio,
Stefano Toffanin,
Matteo Vanni
Abstract:
Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in material science. In particular, the physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential li…
▽ More
Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in material science. In particular, the physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential ligand for metals, it opens the way for a new role of the inorganic chemistry in the 2D world, with special reference to the field of catalysis. The aim of this review is to summarize the state of the art in this subject and to present our most recent results in preparation, functionalization and use of phosphorene and its decorated derivatives. In particular, we discuss several key points, which are currently under investigation: the synthesis, the characterization by theoretical calculations, the high pressure behaviour of black phosphorus, as well as decoration with nanoparticles and encapsulation in polymers. Finally, device fabrication and electrical transport measurements are overviewed on the basis of recent literature and new results collected in our laboratories.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
Black Phosphorus/Palladium Nanohybrid: Unraveling the Nature of P-Pd Interaction and Application in Selective Hydrogenation
Authors:
Matteo Vanni,
Manuel Serrano-Ruiz,
Francesca Telesio,
Stefan Heun,
Martina Banchelli,
Paolo Matteini,
Antonio Massilimiliano Mio,
Giuseppe Nicotra,
Corrado Spinella,
Stefano Caporali,
Andrea Giaccherini,
Francesco d'Acapito,
Maria Caporali,
Maurizio Peruzzini
Abstract:
The burgeoning interest in 2D black phosphorus (bP) contributes to expand its applications in countless fields. In the present study, 2D bP is used as a support for homogeneously dispersed palladium nanoparticles directly grown on it by a wet chemical process. EELS-STEM analysis evidences a strong interaction between palladium and P atoms of bP nanosheets. A quantitative evaluation of this interac…
▽ More
The burgeoning interest in 2D black phosphorus (bP) contributes to expand its applications in countless fields. In the present study, 2D bP is used as a support for homogeneously dispersed palladium nanoparticles directly grown on it by a wet chemical process. EELS-STEM analysis evidences a strong interaction between palladium and P atoms of bP nanosheets. A quantitative evaluation of this interaction comes from XAS measurements that find out a very short Pd-P distance of 2.26 Å proving for the first time the existence of an unprecedented Pd-P coordination bond of covalent nature. Additionally, the average Pd-P coordination number of about 1.7 reveals that bP acts as a polydentate phosphine ligand towards the surface Pd atoms of the nanoparticles, thus preventing their agglomeration and inferring structural stability. These unique properties result in a superior performance in the catalytic hydrogenation of chloronitroarenes to chloroaniline, where a higher chemoselectivity in comparison to other heterogeneous catalyst based on palladium has been observed.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
STM Study of Exfoliated Few Layer Black Phosphorus Annealed in Ultrahigh Vacuum
Authors:
Abhishek Kumar,
F. Telesio,
S. Forti,
A. Al-Temimy,
C. Coletti,
M. Serrano-Ruiz,
M. Caporali,
M. Peruzzini,
F. Beltram,
S. Heun
Abstract:
Black Phosphorus (bP) has emerged as an interesting addition to the category of two-dimensional materials. Surface-science studies on this material are of great interest, but they are hampered by bP's high reactivity to oxygen and water, a major challenge to scanning tunneling microscopy (STM) experiments. As a consequence, the large majority of these studies were performed by cleaving a bulk crys…
▽ More
Black Phosphorus (bP) has emerged as an interesting addition to the category of two-dimensional materials. Surface-science studies on this material are of great interest, but they are hampered by bP's high reactivity to oxygen and water, a major challenge to scanning tunneling microscopy (STM) experiments. As a consequence, the large majority of these studies were performed by cleaving a bulk crystal in situ. Here we present a study of surface modifications on exfoliated bP flakes upon consecutive annealing steps, up to 550 C, well above the sublimation temperature of bP. In particular, our attention is focused on the temperature range 375 C - 400 C, when sublimation starts, and a controlled desorption from the surface occurs alongside with the formation of characteristic well-aligned craters. There is an open debate in the literature about the crystallographic orientation of these craters, whether they align along the zigzag or the armchair direction. Thanks to the atomic resolution provided by STM, we are able to identify the orientation of the craters with respect to the bP crystal: the long axis of the craters is aligned along the zigzag direction of bP. This allows us to solve the controversy, and, moreover, to provide insight in the underlying desorption mechanism leading to crater formation.
△ Less
Submitted 28 August, 2018;
originally announced August 2018.
-
Non-Classical Longitudinal Magneto-Resistance in Anisotropic Black Phosphorus
Authors:
Francesca Telesio,
Nicholas Hemsworth,
William Dickerson,
Matei Petrescu,
Vahid Tayari,
Oulin Yu,
David Graf,
Manuel Serrano-Ruiz,
Maria Caporali,
Maurizio Peruzzini,
Matteo Carrega,
Thomas Szkopek,
Stefan Heun,
Guillaume Gervais
Abstract:
Resistivity measurements of a few-layer black phosphorus (bP) crystal in parallel magnetic fields up to 45 T are reported as a function of the angle between the in-plane field and the source-drain (S-D) axis of the device. The crystallographic directions of the bP crystal were determined by Raman spectroscopy, with the zigzag axis found within 5° of the S-D axis, and the armchair axis in the ortho…
▽ More
Resistivity measurements of a few-layer black phosphorus (bP) crystal in parallel magnetic fields up to 45 T are reported as a function of the angle between the in-plane field and the source-drain (S-D) axis of the device. The crystallographic directions of the bP crystal were determined by Raman spectroscopy, with the zigzag axis found within 5° of the S-D axis, and the armchair axis in the orthogonal planar direction. A transverse magneto-resistance (TMR) as well as a classically-forbidden longitudinal magneto-resistance (LMR) are observed. Both are found to be strongly anisotropic and non-monotonic with increasing in-plane field. Surprisingly, the relative magnitude (in %) of the positive LMR is larger than the TMR above $\sim$32 T. Considering the known anisotropy of bP whose zigzag and armchair effective masses differ by a factor of approximately seven, our experiment strongly suggests this LMR to be a consequence of the anisotropic Fermi surface of bP.
△ Less
Submitted 5 December, 2018; v1 submitted 2 August, 2018;
originally announced August 2018.
-
Phosphorus oxide gate dielectric for black phosphorus field effect transistors
Authors:
W. Dickerson,
V. Tayari,
I. Fakih,
A. Korinek,
M. Caporali,
M. Serrano-Ruiz,
M. Peruzzini,
S. Heun,
G. A. Botton,
T. Szkopek
Abstract:
The environmental stability of the layered semiconductor black phosphorus (bP) remains a challenge. Passivation of the bP surface with phosphorus oxide, POx, grown by a reactive ion etch with oxygen plasma is known to improve photoluminescence efficiency of exfoliated bP flakes. We apply phosphorus oxide passivation in the fabrication of bP field effect transistors using a gate stack consisting of…
▽ More
The environmental stability of the layered semiconductor black phosphorus (bP) remains a challenge. Passivation of the bP surface with phosphorus oxide, POx, grown by a reactive ion etch with oxygen plasma is known to improve photoluminescence efficiency of exfoliated bP flakes. We apply phosphorus oxide passivation in the fabrication of bP field effect transistors using a gate stack consisting of a POx layer grown by reactive ion etching followed by atomic layer deposition of Al2O3. We observe room temperature top-gate mobilities of 115 cm2/Vs in ambient conditions, which we attribute to the low defect density of the bP/POx interface.
△ Less
Submitted 10 April, 2018;
originally announced April 2018.
-
Novel polystyrene-based nanocomposites by phosphorene dispersion
Authors:
Elisa Passaglia,
Francesca Cicogna,
Giulia Lorenzetti,
Stefano Legnaioli,
Maria Caporali,
Manuel Serrano-Ruiz,
Andrea Ienco,
Maurizio Peruzzini
Abstract:
Polystyrene-based phosphorene nanocomposites were prepared by a solvent blending procedure allowing the embedding of black phosphorus (BP) nanoflakes in the polymer matrix. Raman spectroscopy, X Ray Diffraction and TEM microscopy were employed to characterize the structural and the morphological characteristics of the achieved hybrids, with the aim to evaluate the dispersion level of black phospho…
▽ More
Polystyrene-based phosphorene nanocomposites were prepared by a solvent blending procedure allowing the embedding of black phosphorus (BP) nanoflakes in the polymer matrix. Raman spectroscopy, X Ray Diffraction and TEM microscopy were employed to characterize the structural and the morphological characteristics of the achieved hybrids, with the aim to evaluate the dispersion level of black phosphorus layers. TGA, DSC analysis as well as thermal oxidation and photo-degradation techniques were employed to investigate the thermal- and the photo-stability of the samples. The collected results evidenced better thermal and photostability of both polymer matrix and dispersed layered phosphorus, suggesting really interesting polymer-nanofiller synergic effects ascribable to the presence and the good dispersion of the 2D-nanomaterial.
△ Less
Submitted 14 February, 2017;
originally announced February 2017.
-
Decoration of exfoliated black phosphorus with nickel nanoparticles and application in catalysis
Authors:
Maria Caporali,
Manuel Serrano-Ruiz,
Francesca Telesio,
Stefan Heun,
Giuseppe Nicotra,
Corrado Spinella,
Maurizio Peruzzini
Abstract:
Nickel nanoparticles were dispersed on the surface of exfoliated black phosphorus and the resulting nanohybrid Ni/2DBP showed an improved stability respect to pristine 2D BP when kept in ambient conditions in the darkness. Ni/2DBP was applied as catalyst in the semihydrogenation of phenylacetylene and exhibited high conversion and selectivity towards styrene. These features were preserved after re…
▽ More
Nickel nanoparticles were dispersed on the surface of exfoliated black phosphorus and the resulting nanohybrid Ni/2DBP showed an improved stability respect to pristine 2D BP when kept in ambient conditions in the darkness. Ni/2DBP was applied as catalyst in the semihydrogenation of phenylacetylene and exhibited high conversion and selectivity towards styrene. These features were preserved after recycling tests revealing the high stability of the nanohybrid.
△ Less
Submitted 28 August, 2017; v1 submitted 16 September, 2016;
originally announced September 2016.
-
Dephasing in strongly anisotropic black phosphorus
Authors:
N. Hemsworth,
V. Tayari,
F. Telesio,
S. Xiang,
S. Roddaro,
M. Caporali,
A. Ienco,
M. Serrano-Ruiz,
M. Peruzzini,
G. Gervais,
T. Szkopek,
S. Heun
Abstract:
Weak localization was observed and determined in a black phosphorus (bP) field-effect transistor 65 nm thick. The weak localization behaviour was found to be in excellent agreement with the Hikami-Larkin-Nagaoka model for fields up to 1~T, from which characteristic scattering lengths could be inferred. The dephasing length $L_φ$ was found to increase linearly with increasing hole density attaining…
▽ More
Weak localization was observed and determined in a black phosphorus (bP) field-effect transistor 65 nm thick. The weak localization behaviour was found to be in excellent agreement with the Hikami-Larkin-Nagaoka model for fields up to 1~T, from which characteristic scattering lengths could be inferred. The dephasing length $L_φ$ was found to increase linearly with increasing hole density attaining a maximum value of 55 nm at a hole density of approximately $10^{13} cm^{-2}$ inferred from the Hall effect. The temperature dependence of $L_φ$ was also investigated and above 1~K, it was found to decrease weaker than the $L_φ\propto T^{-\frac{1}{2}}$ dependence characteristic of electron-electron scattering in the presence of elastic scattering in two dimensions. Rather, the observed power law was found to be close to that observed previously in other quasi-one-dimensional systems such as metallic nanowires and carbon nanotubes. We attribute our result to the crystal structure of bP which host a `puckered' honeycomb lattice forming a strongly anisotropic medium
△ Less
Submitted 15 August, 2016; v1 submitted 28 July, 2016;
originally announced July 2016.
-
The role of water in the preparation and stabilization of high quality phosphorene flakes
Authors:
Manuel Serrano-Ruiz,
Maria Caporali,
Andrea Ienco,
Vincenzo Piazza,
Stefan Heun,
Maurizio Peruzzini
Abstract:
Water is believed to be harmful for the stability of phosphorene.On the contrary, the presence of small amount of water allows the synthesis of high-quality material in liquid exfoliation of black phosphorus using dimethylsulfoxide as solvent. A phosphorus/water molar ratio between 1.5 and 14 maximizes the quality of the phosphorene flakes and their stability.
Water is believed to be harmful for the stability of phosphorene.On the contrary, the presence of small amount of water allows the synthesis of high-quality material in liquid exfoliation of black phosphorus using dimethylsulfoxide as solvent. A phosphorus/water molar ratio between 1.5 and 14 maximizes the quality of the phosphorene flakes and their stability.
△ Less
Submitted 13 November, 2015;
originally announced November 2015.