-
In-plane thermal diffusivity determination using beam-offset frequency-domain thermoreflectance with a one-dimensional optical heat source
Authors:
Kai Xu,
Jiali Guo,
Grazia Raciti,
Alejandro R. Goni,
M. Isabel Alonso,
Xavier Borrise,
Ilaria Zardo,
Mariano Campoy-Quiles,
Juan Sebastian Reparaz
Abstract:
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments,…
▽ More
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments, just to name a few: (i) it leads to a slower spatial decay of the temperature field in the direction perpendicular to the line-shaped heat source, allowing to probe the temperature field at larger distances from the heater, hence, enhancing the sensitivity to in-plane thermal transport; (ii) the frequency range of interest is typically < 100 kHz. This rather low frequency range is convenient regarding the cost of the required excitation laser system but, most importantly, it allows the study of materials without the presence of a metallic transducer with almost no influence of the finite optical penetration depth of the pump and probe beams on the thermal phase lag, which arises from the large thermal penetration depth imposed by the used frequency range. We also show that for the case of a harmonic thermal excitation source, the phase lag between the thermal excitation and thermal response of the sample exhibits a linear dependence with their spatial offset, where the slope is proportional to the inverse of the thermal diffusivity of the material. We demonstrate the applicability of this method to the cases of: (i) suspended thin films of Si and PDPP4T, (ii) Bi bulk samples, and (iii) Si, glass, and highly-oriented pyrollitic graphite (HOPG) bulk samples with a thin metallic transducer. Finally, we also show that it is possible to study in-plane heat transport on substrates with rather low thermal diffusivity, e.g., glass, even using a metallic transducer.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Identifying structure-absorption relationships and predicting absorption strength of non-fullerene acceptors for organic photovoltaics
Authors:
Jun Yan,
Xabier Rodriguez-Martinez,
Drew Pearce,
Hana Douglas,
Danai Bili,
Mohammed Azzouzi,
Flurin Eisner,
Alise Virbule,
Elham Rezasoltani,
Valentina Belova,
Bernhard Dorling,
Sheridan Few,
Anna A. Szumska,
Xueyan Hou,
Guichuan Zhang,
Hin-Lap Yip,
Mariano Campoy-Quiles,
Jenny Nelson
Abstract:
Non-fullerene acceptors (NFAs) are excellent light harvesters, yet the origin of such high optical extinction is not well understood. In this work, we investigate the absorption strength of NFAs by building a database of time-dependent density functional theory (TDDFT) calculations of ~500 pi-conjugated molecules. The calculations are first validated by comparison with experimental measurements on…
▽ More
Non-fullerene acceptors (NFAs) are excellent light harvesters, yet the origin of such high optical extinction is not well understood. In this work, we investigate the absorption strength of NFAs by building a database of time-dependent density functional theory (TDDFT) calculations of ~500 pi-conjugated molecules. The calculations are first validated by comparison with experimental measurements on liquid and solid state using common fullerene and non-fullerene acceptors. We find that the molar extinction coefficient (ε_(d,max)) shows reasonable agreement between calculation in vacuum and experiment for molecules in solution, highlighting the effectiveness of TDDFT for predicting optical properties of organic pi-conjugated molecules. We then perform a statistical analysis based on molecular descriptors to identify which features are important in defining the absorption strength. This allows us to identify structural features that are correlated with high absorption strength in NFAs and could be used to guide molecular design: highly absorbing NFAs should possess a planar, linear, and fully conjugated molecular backbone with highly polarisable heteroatoms. We then exploit a random decision forest to draw predictions for ε_(d,max) using a computational framework based on extended tight-binding Hamiltonians, which shows reasonable predicting accuracy with lower computational cost than TDDFT. This work provides a general understanding of the relationship between molecular structure and absorption strength in pi-conjugated organic molecules, including NFAs, while introducing predictive machine-learning models of low computational cost.
△ Less
Submitted 18 March, 2022;
originally announced March 2022.
-
Anisotropic Thermoreflectance Thermometry: A contactless frequency-domain approach to study anisotropic thermal transport
Authors:
L. A. Perez,
K. Xu,
M. R. Wagner,
B. Dorling,
A. Perevedentsev,
A. R. Goni,
M. Campoy-Quiles,
M. I. Alonso,
J. S. Reparaz
Abstract:
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as used in the 3-omega method, however, kee** all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determ…
▽ More
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as used in the 3-omega method, however, kee** all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determine all the elements of the thermal conductivity tensor, which is experimentally achieved by simply rotating the sample with respect to the line-shaped optical heater. We provide the mathematical solution of the heat equation for the cases of anisotropic substrates, multilayers, as well as thin films. This methodology allows an accurate determination of the thermal conductivity, and does not require complex modeling or intensive computational efforts to process the experimental data, i.e., the thermal conductivity is obtained through a simple linear fit ("slope method"), in a similar fashion as in the 3-omega method. We demonstrate the potential of this approach by studying isotropic and anisotropic materials in a wide range of thermal conductivities. In particular, we have studied the following inorganic and organic systems: (i) glass, Si, and Ge substrates (isotropic), (ii) $β$-Ga$_2$O$_3$, and a Kapton substrate (anisotropic) and , (iii) a 285 nm SiO$_2$/Si thin film. The accuracy in the determination of the thermal conductivity is estimated at $\approx$ 5\%, whereas the best temperature resolution is $Δ$T $\approx$ 3 mK.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
On the role of the electron-phonon interaction in the temperature dependence of the gap of lead halide perovskites
Authors:
A. Francisco-López,
B. Charles,
O. J. Weber,
M. I. Alonso,
M. Garriga,
M. Campoy-Quiles,
M. T. Weller,
A. R. ~Goñi
Abstract:
Lead halide perovskites are causing a change of paradigm in photovoltaics. Among other peculiarities, these perovskites exhibit an atypical temperature dependence of the fundamental optical gap: It decreases in energy with decreasing temperature. So far reports ascribe such a behavior to a particularly strong electron-phonon renormalization of the band gap, neglecting completely contributions from…
▽ More
Lead halide perovskites are causing a change of paradigm in photovoltaics. Among other peculiarities, these perovskites exhibit an atypical temperature dependence of the fundamental optical gap: It decreases in energy with decreasing temperature. So far reports ascribe such a behavior to a particularly strong electron-phonon renormalization of the band gap, neglecting completely contributions from thermal expansion effects. However, high pressure experiments performed, for instance, on the archetypal perovskite MAPbI$_3$, where MA stands for methylammonium, yield a negative pressure coefficient for the gap of the tetragonal room-temperature phase, which speaks against the assumption of a negligible gap shift due to thermal expansion. On the basis of the high pressure results, we show here that for MAPbI$_3$ the temperature-induced gap renormalization due to electron-phonon interaction can only account for about 40\% of the total energy shift, thus implying thermal expansion to be the dominant term. Furthermore, this result possesses general validity, holding also for the tetragonal or cubic phase, stable at ambient conditions, of other halide perovskite counterparts.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Dynamic disorder, phonon lifetimes, and the assignment of modes to the vibrational spectra of methylammonium lead halide perovskites
Authors:
Aurélien M. A. Leguy,
Alejandro R. Goñi,
Jarvist M. Frost,
Jonathan Skelton,
Federico Brivio,
Xabier Rodríguez-Martínez,
Oliver J. Weber,
Anuradha Pallipurath,
M. Isabel Alonso,
Mariano Campoy-Quiles,
Mark T. Weller,
Jenny Nelson,
Aron Walsh,
Piers R. F. Barnes
Abstract:
We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations.1 Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm…
▽ More
We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations.1 Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm-1. Reorientation of the methylammonium cations, unlocked in their cavities at the orthorhombic-to-tetragonal phase transition, plays a key role in sha** the vibrational spectra of the different compounds. Calculations show that these dynamics effects split Raman peaks and create more structure than predicted from the independent harmonic modes. This explains the presence of extra peaks in the experimental spectra that have been a source of confusion in earlier studies. We discuss singular features, in particular the torsional vibration of the C-N axis, which is the only molecular mode that is strongly influenced by the size of the lattice. From analysis of the spectral linewidths, we find that MAPbI3 shows exceptionally short phonon lifetimes, which can be linked to low lattice thermal conductivity. We show that optical rather than acoustic phonon scattering is likely to prevail at room temperature in these materials.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
Giant Optical Polarization Rotation Induced by Spin-Orbit Coupling in Polarons
Authors:
Blai Casals,
Rafael Cichelero,
Pablo García Fernández,
Javier Junquera,
David Pesquera,
Mariano Campoy-Quiles,
Ingrid C. Infante,
Florencio Sánchez,
Josep Fontcuberta,
Gervasi Herranz
Abstract:
We have uncovered a giant gyrotropic magneto-optical response for doped ferromagnetic manganite La2/3Ca1/3MnO3 around the near room-temperature paramagnetic-to-ferromagnetic transition. At odds with current wisdom, where this response is usually assumed to be fundamentally fixed by the electronic band structure, we point to the presence of small polarons as the driving force for this unexpected ph…
▽ More
We have uncovered a giant gyrotropic magneto-optical response for doped ferromagnetic manganite La2/3Ca1/3MnO3 around the near room-temperature paramagnetic-to-ferromagnetic transition. At odds with current wisdom, where this response is usually assumed to be fundamentally fixed by the electronic band structure, we point to the presence of small polarons as the driving force for this unexpected phenomenon. We explain the observed properties by the intricate interplay of mobility, Jahn-Teller effect and spin-orbit coupling of small polarons. As magnetic polarons are ubiquitously inherent to many strongly correlated systems, our results provide an original, general pathway towards the generation of gigantic gyrotropic responses that can be harnessed for nonreciprocal devices that exploit the polarization of light.
△ Less
Submitted 22 February, 2016;
originally announced February 2016.