-
Characterization of new eco friendly gas mixtures based on HFO for RPCs
Authors:
G. Proto,
G. Aielli,
E. Alunno Camelia,
P. Camarri,
R. Cardarelli,
A. Di Ciaccio,
L. Di Stante,
B. Liberti,
A. Paoloni,
E. Pastori,
L. Pizzimento,
A. Rocchi,
R. Santonico,
E. Tusi
Abstract:
The ATLAS RPC standard mixture, mainly based on C$_{2}$H$_{2}$F$_{4}$, has a high Global Warming Potential (GWP) and therefore the search for RPC eco friendly gases is mandatory. In this work we present the results on the detector performances in terms of efficiency, prompt and ionic charge, with different gas mixtures.
The ATLAS RPC standard mixture, mainly based on C$_{2}$H$_{2}$F$_{4}$, has a high Global Warming Potential (GWP) and therefore the search for RPC eco friendly gases is mandatory. In this work we present the results on the detector performances in terms of efficiency, prompt and ionic charge, with different gas mixtures.
△ Less
Submitted 30 May, 2020;
originally announced June 2020.
-
Linearity and rate capability measurements of RPC with semi-insulating crystalline electrodes operating in avalanche mode
Authors:
A. Rocchi,
R. Cardarelli,
B. Liberti,
G. Aielli,
E. Alunno Camelia,
P. Camarri,
M. Cirillo,
A. Di Ciaccio,
L. Di Stante,
M. Lucci,
E. Pastori,
L. Pizzimento,
G. Proto,
E. Tusi,
R. Santonico
Abstract:
The intrinsic rate capability and the ageing properties of the Resistive Plate Chambers are closely related to the electrodes material and to the front-end electronics threshold. The development of a low noise pre-amplifier led us to improve the intrinsic rate capability of High Pressure Laminate (bakelite) up to $\sim10\;kHz/cm^2$, nevertheless the effective rate is significantly limited by elect…
▽ More
The intrinsic rate capability and the ageing properties of the Resistive Plate Chambers are closely related to the electrodes material and to the front-end electronics threshold. The development of a low noise pre-amplifier led us to improve the intrinsic rate capability of High Pressure Laminate (bakelite) up to $\sim10\;kHz/cm^2$, nevertheless the effective rate is significantly limited by electrodes ageing. To further improve the effective rate capability new materials are investigated. A Resistive Plate Chamber with crystalline semi-insulating Gallium Arsenide electrodes has been characterized with high energy electrons beam at the Beam Test Facility (BFT), (INFN National Laboratory of Frascati, Italy). The response of the Resistive Plate Chamber to multiple bunched electrons was measured operating the detector in avalanche mode. The intrinsic rate capability has been also measured operating the detector in a uniform high energy gamma radiation field at the GIF++ facility (EHN1 of SPS, CERN).
△ Less
Submitted 30 May, 2020;
originally announced June 2020.
-
RPC performance vs FE electoronics and detector parameters
Authors:
R. Cardarelli,
G. Aielli,
E. Alunno Camelia,
S. Bruno,
A. Caltabiano,
P. Camarri,
A. Di Ciaccio,
B. Liberti,
L. Massa,
L. Pizzimento,
A. Rocchi
Abstract:
The first Resistive Plate Chambers detectors were developed for cosmic ray experiments, where low rate capability, good time resolution and low cost per unit of area were needed. These same features, except for the low rate capability, were required in the muon spectrometers of the collider experiments like LHC. For this purpose newRPCdetectors with increased rate capability were developed. The ra…
▽ More
The first Resistive Plate Chambers detectors were developed for cosmic ray experiments, where low rate capability, good time resolution and low cost per unit of area were needed. These same features, except for the low rate capability, were required in the muon spectrometers of the collider experiments like LHC. For this purpose newRPCdetectors with increased rate capability were developed. The rate capability improvement has been achieved thanks to the transition from streamer to saturated avalanche regime, in which the average charge produced in the gas dicharge is smaller. The price to pay for this working mode switch is the transfer of the amplification from the detector to the FE electorinics. The High luminosity LHC and the future colliders will require even greater rate capability in the muon spectrometer compared to the current one. For this reason, further improving of the rate capability is required. The transition from the saturated avalanche to a low saturated avalanche regime moves in this direction and needs a new front end electronics with better signal to noise ratio, because the average induced charge on the electrode is even smaller. The front end electronics design is crucial for the RPC performances. In this paper we discuss the performances of the RPC detector changing the front end design and the detector parameters.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
-
Development of gaseous particle detectors based on semiconductive plate electrodes
Authors:
A. Rocchi,
R. Cardarelli,
G. Aielli,
E. Alunno Camelia,
S. Bruno,
A. Caltabiano,
P. Camarri,
A. Di Ciaccio,
B. Liberti,
L. Massa,
L. Pizzimento
Abstract:
A new particle detector with sub-nanosecond time resolution capable of working in high-rate environment (rate capability of the order of $MHz/ cm^2$) is under developmnet. Semiconductive electrodes with resistivity $ρ$ up to $10^8 Ω\cdot cm$ have been used to improve the RPC [1] [2] rate capability. In this paper efficiency and time resolution of three different detector structures are presented.
A new particle detector with sub-nanosecond time resolution capable of working in high-rate environment (rate capability of the order of $MHz/ cm^2$) is under developmnet. Semiconductive electrodes with resistivity $ρ$ up to $10^8 Ω\cdot cm$ have been used to improve the RPC [1] [2] rate capability. In this paper efficiency and time resolution of three different detector structures are presented.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Development of a new Front End electronics in Silicon and Silicon-Germanium technology for the Resistive Plate Chamber detector for high rate experiments
Authors:
Luca Pizzimento,
Roberto Cardarelli,
Giulio Aielli,
Elio Alunno Camelia,
Salvatore Bruno,
Alessandro Caltabiano,
Paolo Camarri,
Anna Di Ciaccio,
Barbara Liberti,
Lorenzo Massa,
Alessandro Rocchi
Abstract:
The upgrade of the Resistive Plate Chamber (RPC) detector, in order to increase the detector rate capability and to be able to work efficiently in high rate environment, consists in the reduction of the operating voltage along with the detection of signals which are few hundred μV small. The approach chosen by this project to achieve this objective is to develop a new kind of Front End electronics…
▽ More
The upgrade of the Resistive Plate Chamber (RPC) detector, in order to increase the detector rate capability and to be able to work efficiently in high rate environment, consists in the reduction of the operating voltage along with the detection of signals which are few hundred μV small. The approach chosen by this project to achieve this objective is to develop a new kind of Front End electronics which, thanks to a mixed technology in Silicon and Silicon-Germanium, enhance the detector performances increasing its rate capability. The Front End developed is composed by a preamplifier in Silicon BJT technology with a very low inner noise (1000 $e^{-}$ rms) and an amplification factor of 0.3-0.4 mV/fC and a new kind of discriminator in SiGe HJT technology which allows a minimum threshold of the order of 0.5 mV. The performances of this kind of Front End will be shown. The results are obtained by using the CERN H8 beamline with a full-size RPC chamber of 1 mm gas gap and 1.2 mm thickness of electrodes equipped with this kind of Front End electronics.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
Design a TDC in SiGe for RPC's electronics Front-end for the use in a high-rate experiment
Authors:
Salvatore Bruno,
Roberto Cardarelli,
Giulio Aielli,
davide Badoni,
Paolo Camarri,
Anna Di Ciaccio,
Eelio Alunno Camelia,
Alessandro Caltabiano,
Lorenzo Massa,
Lorenzo Paolozzi,
Luca Pizzimento,
Alessandro Rocchi
Abstract:
With the new generation of the RPC, it is possible to work with induced signals of hundreds $μV$, hence the front-end electronics is an important and delicate part of the detector in order to get a detectable signal. The electronic chain is made up of an amplifier, a discriminator, a TDC. The new front-end is realized with the use of silicon-germanium (SiGe) components, provided by IHP microelectr…
▽ More
With the new generation of the RPC, it is possible to work with induced signals of hundreds $μV$, hence the front-end electronics is an important and delicate part of the detector in order to get a detectable signal. The electronic chain is made up of an amplifier, a discriminator, a TDC. The new front-end is realized with the use of silicon-germanium (SiGe) components, provided by IHP microelectronics. With this technology we can implement BJT and CMOS transistors on the same chip. The benefit of this improvement is to minimize: power consumption of the channels ($2 ÷3$ $ \frac{mW}{ch}$), noise (500 $e^-$ r.m.s), radiation hardness (10 kGy,$10^3$ $\frac{n}{cm}$) and it maximizes the speed of response electronics. In this work I will highlight the first TDC prototypes' results. The TDC uses a local oscillator, that has an oscillation range between $0.6 ÷3 $ GHz, and a the temporal jitter of 15 ps. The data output from the TDC are presented in binary in order to lighten data processing to the acquisition system. Moreover, we are studying a way to minimize system latency. This optimization involves the addition of a serializer (PISO) that sends the TDC data output to the acquisition system at 2 GHz.
△ Less
Submitted 21 June, 2018; v1 submitted 11 June, 2018;
originally announced June 2018.
-
Optimization of RPCs read-out panel with electromagnetic simulation
Authors:
E. Alunno Camelia,
R. Cardarelli,
A. Di Ciaccio,
S. Bruno,
A. Caltabiano,
P. Camarri,
B. Liberti,
L. Massa,
L. Pizzimento,
A. Rocchi
Abstract:
With the upgrade of the RPCs [1]-[2] and the increase of its performances, the study and the optimization of the read-out panel is necessary in order to maintain the signal integrity and to reduce the intrinsic crosstalk. Through Electromagnetic Simulation, performed with CST Studio Suite, new panels design are tested and their crosstalk property are studied. The behavior of different type of pane…
▽ More
With the upgrade of the RPCs [1]-[2] and the increase of its performances, the study and the optimization of the read-out panel is necessary in order to maintain the signal integrity and to reduce the intrinsic crosstalk. Through Electromagnetic Simulation, performed with CST Studio Suite, new panels design are tested and their crosstalk property are studied. The behavior of different type of panel is shown, in particular a panel with the decoupling strip connected through their characteristic impedance to the ground plane is simulated.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.