-
Realization and simulations of the new SPES Beam Cooler
Authors:
A. Ruzzon,
M. Maggiore,
C. Roncolato,
G. Ban,
J. F. Cam,
C. Gautier,
C. Vandamme
Abstract:
In order to allow a good separation of isotopes in a High Resolution Mass Spectrometer (HRMS), the transverse emittance and the energy spread of the beam should have very low values, for this reason a Beam Cooler (BC) is planned to be located between the ISOL target, i.e. the beam source, and the HRMS in the new project Selective Production of Exotic Species (SPES).
In the SPES project the spect…
▽ More
In order to allow a good separation of isotopes in a High Resolution Mass Spectrometer (HRMS), the transverse emittance and the energy spread of the beam should have very low values, for this reason a Beam Cooler (BC) is planned to be located between the ISOL target, i.e. the beam source, and the HRMS in the new project Selective Production of Exotic Species (SPES).
In the SPES project the spectrometer resolution must be higher than dm/m=5E-5 and thus the features of the beam at the entrance of the HRMS should be at least emittance (95%, normalized) < 8.3E-3 pi mm mrad and sigma_E < 1.5eV.
A new BC has been designed and realized by the Laboratoire de Physique Corpuscolaire (LPC) at Caen, France, for the SPES facility at Laboratori Nazionali di Legnaro (LNL), near Padova, Italy.
BCs cool down the beam thanks to a dissipative process in which the thermal energy passes from the beam ions to another medium whose constituent is typically much lighter, Helium gas in our case. This process takes place inside a confinement system that on the one hand to limit the spread of the cooling medium, and on the other to allow the beam to continue along the required trajectory, in the presented device it is a row of radio frequency quadrupoles in an almost closed chamber.
This document presents the main features of the new BC together with the results of a preliminary study where the beam dynamic has been simulated. The analysis embeds also the investigation of the gas distribution inside and outside the BC.
The beam dynamic simulations are based on the Simion code while the estimation of the gas distribution is computed with MolFlow+.
Simulations show that accurately setting the BC leads to a large improvement of the emittance while the energy spread still needs to be improved. Limiting the gas pressure in the acceleration zone seems to allow the required final boost.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
High-resolution laser system for the S3-Low Energy Branch
Authors:
Jekabs Romans,
Anjali Ajayakumar,
Martial Authier,
Frederic Boumard,
Lucia Caceres,
Jean-Francois Cam,
Arno Claessens,
Samuel Damoy,
Pierre Delahaye,
Philippe Desrues,
Wenling Dong,
Antoine Drouart,
Patricia Duchesne,
Rafael Ferrer,
Xavier Flechard,
Serge Franchoo,
Patrice Gangnant,
Sarina Geldhof,
Ruben P. de Groote,
Nathalie Lecesne,
Renan Leroy,
Julien Lory,
Franck Lutton,
Vladimir Manea,
Yvan Merrer
, et al. (17 additional authors not shown)
Abstract:
In this paper we present the first high-resolution laser spectroscopy results obtained at the GISELE laser laboratory of the GANIL-SPIRAL2 facility, in preparation for the first experiments with the S$^3$-Low Energy Branch. Studies of neutron-deficient radioactive isotopes of erbium and tin represent the first physics cases to be studied at S$^3$. The measured isotope-shift and hyperfine structure…
▽ More
In this paper we present the first high-resolution laser spectroscopy results obtained at the GISELE laser laboratory of the GANIL-SPIRAL2 facility, in preparation for the first experiments with the S$^3$-Low Energy Branch. Studies of neutron-deficient radioactive isotopes of erbium and tin represent the first physics cases to be studied at S$^3$. The measured isotope-shift and hyperfine structure data are presented for stable isotopes of these elements. The erbium isotopes were studied using the $4f^{12}6s^2$ $^3H_6 \rightarrow 4f^{12}(^3 H)6s6p$ $J = 5$ atomic transition (415 nm) and the tin isotopes were studied by the $5s^25p^2 (^3P_0) \rightarrow 5s^25p6s (^3P_1)$ atomic transition (286.4 nm), and are used as a benchmark of the laser setup. Additionally, the tin isotopes were studied by the $5s^25p6s (^3P_1) \rightarrow 5s^25p6p (^3P_2)$ atomic transition (811.6 nm), for which new isotope-shift data was obtained and the corresponding field-shift $F_{812}$ and mass-shift $M_{812}$ factors are presented.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
The spiral1 charge breeder: key points for a performant 1+ beam injection
Authors:
L. Maunoury,
O. Kamalou,
J. F. Cam,
S. Damoy,
P. Delahaye,
M. Dubois,
R. Frigot,
S. Hormigos,
C. Vandamme
Abstract:
The SPIRAL1 charge breeder is now under operation. Radioactive beam has already been delivered [1] to Physicist for performing experiment. Although charge breeding efficiencies demonstrated high performances for stable ion beams, those efficiencies regarding radioactive ion beams were found, in the first experiments, lower than expected. The beam optics, prior to the injection of the 1+ ions into…
▽ More
The SPIRAL1 charge breeder is now under operation. Radioactive beam has already been delivered [1] to Physicist for performing experiment. Although charge breeding efficiencies demonstrated high performances for stable ion beams, those efficiencies regarding radioactive ion beams were found, in the first experiments, lower than expected. The beam optics, prior to the injection of the 1+ ions into the SPIRAL1 charge breeder, is of prime importance [2] for getting such high efficiencies. Moreover, the intensities of the radioactive ion beams are so low, that it is really difficult to tune the charge breeder. The tuning of the charge breeder for radioactive ion beams requires a particular procedure often referred as blind tuning. A stable beam hav-ing a close Brho (few percent) is required to find out the set of optic parameters preceding the tuning of the radioactive beam. Hence, it has been decided to focus our effort on that procedure as to get control of the 1+ beam optics leading to high charge breeding efficiencies whatever the 1+ mass, energy and Target Ion Source System (TISS) used. Being aware that each TISS provide ion beams with a specific energy spread DeltaE, and given that the acceptance energy win-dow of the charge breeder is rather narrow; that parameter must play also an important role in the whole charge breed-ing efficiency.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Active volatile drops on liquid baths
Authors:
Benjamin Reichert,
Jean-Benoît Le Cam,
Arnaud Saint-Jalmes,
Giuseppe Pucci
Abstract:
In most experimental studies, active drops propel in a liquid bulk due to self-generated interfacial stresses of solutal origin. Here, we demonstrate the self-propulsion of a volatile drop on the surface of a liquid bath due to stresses of thermal origin. Evaporative heat pum** is converted into directed motion driven by thermocapillary stresses, which emerge on the drop surface as a result of a…
▽ More
In most experimental studies, active drops propel in a liquid bulk due to self-generated interfacial stresses of solutal origin. Here, we demonstrate the self-propulsion of a volatile drop on the surface of a liquid bath due to stresses of thermal origin. Evaporative heat pum** is converted into directed motion driven by thermocapillary stresses, which emerge on the drop surface as a result of a symmetry breaking of the drop temperature field. The dependence of the drop speed on the activity source, i.e. the evaporation flux, is derived with scaling arguments and captures the experimental data.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
The polarized spectral energy distribution of NGC 4151
Authors:
F. Marin,
J. Le Cam,
E. Lopez-Rodriguez,
M. Kolehmainen,
B. L. Babler,
M. R. Meade
Abstract:
NGC 4151 is among the most well-studied Seyfert galaxies that does not suffer from strong obscuration along the observer's line-of-sight. This allows to probe the central active galactic nucleus (AGN) engine with photometry, spectroscopy, reverberation map** or interferometry. Yet, the broadband polarization from NGC 4151 has been poorly examined in the past despite the fact that polarimetry giv…
▽ More
NGC 4151 is among the most well-studied Seyfert galaxies that does not suffer from strong obscuration along the observer's line-of-sight. This allows to probe the central active galactic nucleus (AGN) engine with photometry, spectroscopy, reverberation map** or interferometry. Yet, the broadband polarization from NGC 4151 has been poorly examined in the past despite the fact that polarimetry gives us a much cleaner view of the AGN physics than photometry or spectroscopy alone. In this paper, we compile the 0.15 -- 89.0 $μ$m total and polarized fluxes of NGC 4151 from archival and new data in order to examine the physical processes at work in the heart of this AGN. We demonstrate that, from the optical to the near-infrared (IR) band, the polarized spectrum of NGC 4151 shows a much bluer power-law spectral index than that of the total flux, corroborating the presence of an optically thick, locally heated accretion flow, at least in its near-IR emitting radii. Specific signatures from the atmosphere of the accretion structure are tentatively found at the shortest ultraviolet (UV) wavelengths, before the onset of absorption opacity. Otherwise, dust scattering appears to be the dominant contributor from the near-UV to near-IR polarized spectrum, superimposed onto a weaker electron component. We also identify a change in the polarization processes from the near-IR to the mid-IR, most likely associated with the transition from Mie scattering to dichroic absorption from aligned dust grains in the dusty torus or narrow-line region. Finally, we present and dicuss the very first far-infrared polarization measurement of NGC 4151 at 89 $μ$m.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
Identification of constitutive parameters from full thermal and kinematic fields: application to hyperelasticity
Authors:
S. Charlès,
Jean-Benoit Le Cam
Abstract:
In this paper, a new inverse identification method is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source from two approaches, a first one that requires the measurement of the temperature field and the value of the thermophysical parameters, and a second one based on the measurement of the kinematics field and a thermo-hyperelastic model that…
▽ More
In this paper, a new inverse identification method is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source from two approaches, a first one that requires the measurement of the temperature field and the value of the thermophysical parameters, and a second one based on the measurement of the kinematics field and a thermo-hyperelastic model that contains the parameters to be identified. The identification does not require any boundary conditions since it is carried out at the local scale. In the present work, the method is applied to the identification of hyperelastic parameters from a heterogeneous heat source field. Due to large deformation undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and thermal fields at the same points before reconstructing the heat source.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Development of an inverse identification method for identifying constitutive parameters by metaheuristic optimization algorithm: Application to hyperelastic materials
Authors:
G Bastos,
A Tayeb,
N. Di Cesare,
Jean-Benoit Le Cam,
E Robin
Abstract:
In the present study, a numerical method based on a metaheuristic parametric algorithm has been developed to identify the constitutive parameters of hyperelastic models, by using FE simulations and full kinematic field measurements. The full kinematic field is measured at the surface of a cruciform specimen submitted to equibiaxial tension. The sample is reconstructed by FE to obtain the numerical…
▽ More
In the present study, a numerical method based on a metaheuristic parametric algorithm has been developed to identify the constitutive parameters of hyperelastic models, by using FE simulations and full kinematic field measurements. The full kinematic field is measured at the surface of a cruciform specimen submitted to equibiaxial tension. The sample is reconstructed by FE to obtain the numerical kinematic field to be compared with the experimental one. The constitutive parameters used in the numerical model are then modified through the optimization process, for the numerical kinematic field to fit with the experimental one. The cost function is then formulated as the minimization of the difference between these two kinematic fields. The optimization algorithm is an adaptation of the Particle Swarm Optimization algorithm, based on the PageRank algorithm used by the famous search engine Google. INTRODUCTION The constitutive parameters of hyperelastic models are generally identified from three homogeneous tests, basically the uniaxial tension, the pure shear and the equibiaxial tension. From about 10 years, an alternative methodology has been developed [1, 2, 3, 4], and consists in performing only one heterogeneous test as long as the field is sufficiently heterogeneous. This is tipically the case when a multiaxial loading is applied to a 3 branch or a 4-branch cruciform specimen, which induces a large number of mechanical states at the specimen surface. The induced heterogeneity is generally analysed through the distribution of the biaxiality ratio and the maximal eigen value of the strain. The Digital Image Correlation (DIC) technique is generally used to retrieve the different mechanical states induces, and provides the full kinematic field at the specimen surface, i.e. a large number of experimental data to be analysed to identify the constitutive parameters of the behaviour model considered.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
A post mortem analysis of the strain-induced crystallization effects on fatigue of elastomers
Authors:
B. Ruellan,
Jean-Benoit Le Cam,
E. Robin,
I. Jeanneau,
F. Canevet,
G. Mauvoisin,
D. Loison
Abstract:
Natural rubber (NR) is the most commonly used elastomer in the automotive industry thanks to its outstanding fatigue resistance. Strain-induced crystallization (SIC) is found to play a role of paramount importance in the great crack growth resistance of NR [1]. Typically, NR exhibits a lifetime reinforcement for non-relaxing loadings [2-3]. At the microscopic scale, fatigue striations were observe…
▽ More
Natural rubber (NR) is the most commonly used elastomer in the automotive industry thanks to its outstanding fatigue resistance. Strain-induced crystallization (SIC) is found to play a role of paramount importance in the great crack growth resistance of NR [1]. Typically, NR exhibits a lifetime reinforcement for non-relaxing loadings [2-3]. At the microscopic scale, fatigue striations were observed on the fracture surface of Diabolo samples tested in fatigue. They are the signature of SIC [2,4,5]. In order to provide additional information on the role of SIC in the fatigue crack growth resistance of NR, striations are investigated through post-mortem analysis after fatigue experiments using loading ranging from-0.25 to 0.25. No striation was observed in the case of tests performed at 90{\textdegree}C. This confirms that the formation of striation requires a certain crystallinity level in the material. At 23{\textdegree}C, two striation regimes were identified: small striation patches with different orientations (Regime 1) and zones with large and well-formed striations (Regime 2). Since fatigue striations are observed for all the loading ratios applied, they are therefore not the signature of the reinforcement. Nevertheless, increasing the minimum value of the strain amplified the striation phenomenon and the occurrence of Regime 2.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Identification of Constitutive Parameters Governing the Hyperelastic Response of Rubber by Using Full-field Measurement and the Virtual Fields Method
Authors:
A Tayeb,
Jean-Benoit Le Cam,
M. Grédiac,
E. Toussaint,
F. Canevet,
E. Robin,
X. Balandraud
Abstract:
In this study, the Virtual Fields Method (VFM) is applied to identify constitutive parameters of hyperelastic models from a heterogeneous test. Digital image correlation (DIC) was used to estimate the displacement and strain fields required by the identification procedure. Two different hyperelastic models were considered: the Mooney model and the Ogden model. Applying the VFM to the Mooney model…
▽ More
In this study, the Virtual Fields Method (VFM) is applied to identify constitutive parameters of hyperelastic models from a heterogeneous test. Digital image correlation (DIC) was used to estimate the displacement and strain fields required by the identification procedure. Two different hyperelastic models were considered: the Mooney model and the Ogden model. Applying the VFM to the Mooney model leads to a linear system that involves the hyperelastic parameters thanks to the linearity of the stress with respect to these parameters. In the case of the Ogden model, the stress is a nonlinear function of the hyperelastic parameters and a suitable procedure should be used to determine virtual fields leading to the best identification. This complicates the identification and affects its robustness. This is the reason why the sensitivity-based virtual field approach recently proposed in case of anisotropic plasticity by Marek et al. (2017) [1] has been successfully implemented to be applied in case of hyperelasticity. Results obtained clearly highlight the benefits of such an inverse identification approach in case of non-linear systems.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
New exotic beams from the SPIRAL 1 upgrade
Authors:
P. Delahaye,
M. Dubois,
L. Maunoury,
J. Angot,
O. Bajeat,
B. Blank,
J. C. Cam,
P. Chauveau,
R. Frigot,
B. Jacquot,
P. Jardin,
P. Lecomte,
S. Hormigos,
O. Kamalou,
V. Kuchi,
B. Osmond,
B. M. Retailleau,
A. Savalle,
T. Stora,
V. Toivanen,
J. C. Thomas,
E. Traykov,
P. Ujic,
R. Vondrasek
Abstract:
Since 2001, the SPIRAL 1 facility has been one of the pioneering facilities in ISOL techniques for reaccelerating radioactive ion beams: the fragmentation of the heavy ion beams of GANIL on graphite targets and subsequent ionization in the Nanogan ECR ion source has permitted to deliver beams of gaseous elements (He, N, O, F, Ne, Ar, Kr) to numerous experiments. Thanks to the CIME cyclotron, energ…
▽ More
Since 2001, the SPIRAL 1 facility has been one of the pioneering facilities in ISOL techniques for reaccelerating radioactive ion beams: the fragmentation of the heavy ion beams of GANIL on graphite targets and subsequent ionization in the Nanogan ECR ion source has permitted to deliver beams of gaseous elements (He, N, O, F, Ne, Ar, Kr) to numerous experiments. Thanks to the CIME cyclotron, energies up to 20 AMeV could be obtained. In 2014, the facility was stopped to undertake a major upgrade, with the aim to extend the production capabilities of SPIRAL 1 to a number of new elements. This upgrade, which is presently under commissioning, consists in the integration of an ECR booster in the SPIRAL 1 beam line to charge breed the beam of different 1+ sources. A FEBIAD source (the so-called VADIS from ISOLDE) was chosen to be the future workhorse for producing many metallic ion beams. The charge breeder is an upgraded version of the Phoenix booster which was previously tested in ISOLDE. The performances of the aforementioned ingredients of the upgrade (targets, 1+ source and charge breeder) have been and are still being optimized in the frame of different European projects (EMILIE, ENSAR and ENSAR2). The upgraded SPIRAL 1 facility will provide soon its first new beams for physics and further beam development are undertaken to prepare for the next AGATA campaign. The results obtained during the on-line commissioning period permit to evaluate intensities for new beams from the upgraded facility.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Study of SPIRAL 2 High intensity Radiofrequency Cooler: Cooling of very high intensity ion beams
Authors:
Ramzi Boussaid,
G. Ban,
J. F. Cam
Abstract:
The experimental study of Spiral-2 High Intensity Radiofrequency Cooler prototype (SHIRaC) is the goal of this paper.
The experimental study of Spiral-2 High Intensity Radiofrequency Cooler prototype (SHIRaC) is the goal of this paper.
△ Less
Submitted 19 March, 2015; v1 submitted 5 March, 2014;
originally announced March 2014.
